summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2007-05-20[ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguityBen Dooks1-1/+1
Change the name of the S3C2443_SDI1 to S3C2443_HSMMC to ensure that it is correctly identified. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4388/1: no need for arm/mm mmap range checks for non-mmuGreg Ungerer1-0/+2
We don't need valid_phys_addr_range() or valid_mmap_phys_addr_range() for the !CONFIG_MMU case. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17[ARM] ARMv6: add CPU_HAS_ASID configurationRussell King2-3/+3
Presently, we check for the minimum ARM architecture that we're building for to determine whether we need ASID support. This is wrong - if we're going to support a range of CPUs which include ARMv6 or higher, we need the ASID. Convert the checks to use a new configuration symbol, and arrange for ARMv6 and higher CPU entries to select it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] Update ARM syscallsRussell King1-0/+10
Add utimensat, signalfd, timerfd, eventfd syscalls. Add ignore defines for sync_file_range and fadvise64_64 which we implement differently. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] 4384/1: S3C2412/13 SPI registers offset correctionSandeep Sanjay Patil1-0/+2
Change the SPI Channel 1 register offset in s3c_spi1_resource[], and s3c2412_dma_mappings[]. Offset has to be 0x100 in s3c2412/13's case. Also, total SPI memory resource size changed to 0x24 for s3c2412/13. Signed-off-by: Sandeep Patil <psandeep.s@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] Remove Integrator/CP SMP platform supportRussell King1-18/+0
The Integrator/CP SMP platform support was never fully merged, and now it's causing build breakage. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16m32r: __xchg() should be always_inlineAl Viro1-1/+2
it depends on elimination of unreachable branches in switch (by object size), so we must declare it always_inline Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6Linus Torvalds6-88/+77
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Add .gitignore entry for syscalltab. sh64: generic quicklist support. sh64: Update cayman defconfig. sh64: Fixup sh-sci build. sh64: ppoll/pselect6() and restartable syscalls. sh64: dma-mapping updates. sh64: Fixups for the irq_regs changes. sh64: Wire up many new syscalls. spelling fixes: arch/sh64/ sh64: ROUND_UP macro cleanup in arch/sh64/kernel/pci_sh5.c
2007-05-16Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds1-3/+0
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: Use menuconfig objects: IDE sl82c105: Switch to ref counting API ide: remove ide_use_dma() ide: add missing validity checks for identify words 62 and 63 ide: remove ide_dma_enable() sl82c105: add speedproc() method and MWDMA0/1 support cs5530/sc1200: add ->speedproc support cs5530/sc1200: DMA support cleanup ide: use ide_tune_dma() part #2 cs5530/sc1200: add ->udma_filter methods ide: always disable DMA before tuning it pdc202xx_new: use ide_tune_dma() alim15x3: use ide_tune_dma() sis5513: PIO mode setup fixes serverworks: PIO mode setup fixes pdc202xx_old: rewrite mode programming code (v2)
2007-05-16ide: remove ide_use_dma()Bartlomiej Zolnierkiewicz1-2/+0
ide_use_dma() duplicates a lot of ide_max_dma_mode() functionality and as all users of ide_use_dma() were converted to use ide_tune_dma() now it is possible to add missing checks to ide_tune_dma() and remove ide_use_dma() completely, so do it. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-16ide: remove ide_dma_enable()Bartlomiej Zolnierkiewicz1-1/+0
* check ->speedproc return value in ide_tune_dma() * use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers * remove no longer needed ide_dma_enable() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-15Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds1-0/+1
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] Fix wrong ID in via-agp.c
2007-05-15SLUB: CONFIG_LARGE_ALLOCS must consider MAX_ORDER limitChristoph Lameter1-1/+5
Take MAX_ORDER into consideration when determining KMALLOC_SHIFT_HIGH. Otherwise we may run into a situation where we attempt to create general slabs larger than MAX_ORDER. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15i386: move common parts of smp into their own fileJeremy Fitzhardinge1-0/+4
Several parts of kernel/smp.c and smpboot.c are generally useful for other subarchitectures and paravirt_ops implementations, so make them available for reuse. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15Remove cpu hotplug defines for __INIT & __INITDATAPrarit Bhargava1-6/+1
After examining what was checked in and the code base I discovered that most of 86c0baf123e474b6eb404798926ecf62b426bf3a wasn't necessary anymore.... So here's a patch that reverts the last part of that changeset: Revert part of 86c0baf123e474b6eb404798926ecf62b426bf3a. The kernel has moved forward to a state where the original change is not necessary. After porting forward, this final version of the patch was applied and broke non-x86 architectures. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15m68k: implement __clear_user()Geert Uytterhoeven1-1/+3
m68k: implement __clear_user(), which is needed by fs/signalfd.c Since we always let the MMU do all checking, clear_user() and __clear_user() are identical. The old clear_user() is renamed to __clear_user() for consistency. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15alpha: fix hard_smp_processor_id compile errorSimon Horman1-1/+1
"Remove hardcoding of hard_smp_processor_id on UP systems", 2f4dfe206a2fc07099dfad77a8ea2f4b4ae2140f in Linus' tree, moved the definition of hard_smp_processor_id linux/smp.h to asm/smp.h for UP systems. This causes a regression on Alpha. cc1: warnings being treated as errors arch/alpha/kernel/setup.c: In function 'setup_arch': arch/alpha/kernel/setup.c:506: warning: implicit declaration of function 'hard_smp_processor_id' make[1]: *** [arch/alpha/kernel/setup.o] error 1 make: *** [arch/alpha/kernel] error 2 By including asm/smp.h non-conditionally in asm/mmu_context.h the problem appears to be resolved. Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15h8300 atomic.h updateYoshinori Sato1-0/+1
add atomic_sub_and_test define. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15nommu: add ioremap_page_range()Paul Mundt1-0/+8
lib/ioremap.c is presently only built in if CONFIG_MMU is set. While this is reasonable, platforms that support both CONFIG_MMU=y or n need to be able to call in to this regardless. As none of the current nommu platforms do anything special with ioremap(), we assume that it's always successful. This fixes the SH-4 build with CONFIG_MMU=n. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15Revert "ipmi: add new IPMI nmi watchdog handling"Linus Torvalds2-2/+0
This reverts commit f64da958dfc83335de1d2bef9d3868f30feb4e53. Andi Kleen is unhappy with the changes, and they really do not seem worth it. IPMI could use DIE_NMI_IPI instead of the new callback, even though that ends up having its own set of problems too, mainly because the IPMI code cannot really know the NMI was from IPMI or not. Manually fix up conflicts in arch/x86_64/kernel/traps.c and drivers/char/ipmi/ipmi_watchdog.c. Cc: Andi Kleen <ak@suse.de> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Corey Minyard <minyard@acm.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-14Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: pxamci: fix PXA27x MMC workaround for bad CRC with 136 bit response mmc: use assigned major for block device sdhci: handle dma boundary interrupts mmc: au1xmmc command types check from data flags
2007-05-14Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds3-18/+35
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [VIDEO]: XVR-500 and XVR-2500 need FB=y. [SPARC32]: asm/system.h needs asm/smp.h [SPARC32]: Update defconfig. [SPARC32]: Fix sparc32 kdebug changes. [SPARC64]: Accept ebus_bus_type for generic DMA ops. [SPARC64]: Add missing cpus_empty() check in hypervisor xcall handling. [SCSI]: Add help text for SCSI_ESP_CORE. [SPARC] SBUS: display7seg.c needs asm/io.h [SPARC] SBUS: bbc_i2c.c needs asm/io.h [SPARC64]: Be more resiliant with PCI I/O space regs. [SERIAL] SUNHV: Add an ID string.
2007-05-14Declare another couple of compat syscalls.Stephen Rothwell1-0/+6
compat_sys_signalfd and compat_sys_timerfd need declarations before PowerPC can wire them up. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-14mmc: use assigned major for block devicePierre Ossman1-0/+2
The MMC block devices now have an assigned major. Make sure we actually use it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-14[SPARC32]: asm/system.h needs asm/smp.hDavid S. Miller1-0/+1
To get hard_smp_processor_id() even on UP builds. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-14[SPARC32]: Fix sparc32 kdebug changes.Robert Reif1-4/+4
Fix recent kdebug changes to compile on sparc32. Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-14[SPARC64]: Accept ebus_bus_type for generic DMA ops.David S. Miller1-14/+30
Based upon a bug report by Meelis Roos. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-14sh64: generic quicklist support.Paul Mundt1-77/+23
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh64: Fixup sh-sci build.Paul Mundt1-0/+1
sh-sci needs asm/sci.h, borrow this from sh so we can build again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh64: ppoll/pselect6() and restartable syscalls.Paul Mundt1-0/+6
This patch was hanging around for some time while we were waiting for the compiler situation to improve.. now that all is well again, finally merge it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh64: dma-mapping updates.Paul Mundt1-5/+9
Follow the noncoherent changes from sh. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh64: Fixups for the irq_regs changes.Paul Mundt1-0/+1
A few interrupt handlers were never updated, fix them up. We were missing the irq_regs conversion also, so do that at the same time. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14sh64: Wire up many new syscalls.Paul Mundt1-6/+37
This has suffered a bit of bitrot, so we're a bit behind on the syscalls. There were a few that were wrapped incorrectly as well, caught by the syscall checker. Fix them all up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-14[AGPGART] Fix wrong ID in via-agp.cGabriel Mansi1-0/+1
there is a wrong id in drivers/char/agp/via-agp.c #define PCI_DEVICE_ID_VIA_CX700 0x8324 It must be 0x0324 Notice that PCI_DEVICE_ID_VIA_CX700 is also used in drivers/i2c/busses/i2c-viapro.c and drivers/ide/pci/via82cxxx.c So, I think that constant must be renamed to avoid conflicting. I attached a proposed patch. Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-13Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds66-56/+2078
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) [ARM] Use new get_irqnr_preamble [ARM] Ensure machine class menu is sorted alphabetically [ARM] 4333/2: KS8695: Micrel Development board [ARM] 4332/2: KS8695: Serial driver [ARM] 4331/3: Support for Micrel/Kendin KS8695 processor [ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development board [ARM] 4372/1: Define byte sizes in asm-arm/sizes.h [ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors. [ARM] Update mach-types [ARM] export symbol csum_partial_copy_from_user [ARM] iop13xx: msi support [ARM] stacktrace fix [ARM] Spinlock initializer cleanup [ARM] remove useless config option GENERIC_BUST_SPINLOCK [ARM] 4303/3: base kernel support for TI DaVinci [ARM] 4369/1: AT91: Fix circular dependency in header files [ARM] 4368/1: S3C24xx: build fix [ARM] 4364/1: AT91: LEDS on AT91SAM9261-EK [ARM] Fix iop32x/iop33x build [ARM] EBSA110: fix build errors caused by missing "const" ...
2007-05-13include/linux: trivial repair whitespace damageDaniel Walker2-6/+6
Adding tabs where spaces currently are. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12SLUB: i386 supportChristoph Lameter2-5/+2
SLUB cannot run on i386 at this point because i386 uses the page->private and page->index field of slab pages for the pgd cache. Make SLUB run on i386 by replacing the pgd slab cache with a quicklist. Limit the changes as much as possible. Leave the improvised linked list in place etc etc. This has been working here for a couple of weeks now. Acked-by: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12Merge branch 'fixes' into develRussell King8-22/+53
2007-05-12Merge branch 'omap-fixes' into fixesRussell King1-1/+30
2007-05-12[ARM] Use new get_irqnr_preambleRussell King8-32/+42
Use the new get_irqnr_preamble macro to move the address of the IRQ controller outside the IRQ handling loop. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-12[SPARC]: Wire up signalfd/timerfd/eventfd syscalls.David S. Miller2-2/+8
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-12Add the combined mode for ATI SB700Henry Su1-0/+1
Besides those modes in ATI SB600 SATA controller, ATI SB700 supports one more mode:the combined mode. The combined mode is a Legacy IDE mode used for compatibility with some old OS without AHCI driver, but now it is not necessary for Linux since the kernel has supported AHCI. Signed-off-by: Luugi Marsan <luugi.marsan@amd.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/Tejun Heo1-1/+1
ACPI applies to both SATA and PATA. Drop the 'S' from the config variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12libata: ignore EH scheduling during initializationTejun Heo1-0/+1
libata enables SCSI host during ATA host activation which happens after IRQ handler is registered and IRQ is enabled. All ATA ports are in frozen state when IRQ is enabled but frozen ports may raise limited number of IRQs after being frozen - IOW, ->freeze() is not responsible for clearing pending IRQs. During normal operation, the IRQ handler is responsible for clearing spurious IRQs on frozen ports and it usually doesn't require any extra code. Unfortunately, during host initialization, the IRQ handler can end up scheduling EH for a port whose SCSI host isn't initialized yet. This results in OOPS in the SCSI midlayer. This is relatively short window and scheduling EH for probing is the first thing libata does after initialization, so ignoring EH scheduling until initialization is complete solves the problem nicely. This problem was spotted by Berck E. Nash in the following thread. http://thread.gmane.org/gmane.linux.kernel/519412 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Berck E. Nash <flyboy@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12libata: clean up SFF init messTejun Heo1-9/+5
The intention of using port_mask in SFF init helpers was to eventually support exoctic configurations such as combination of legacy and native port on the same controller. This never became actually necessary and the related code always has been subtly broken one way or the other. Now that new init model is in place, there is no reason to make common helpers capable of handling all corner cases. Exotic cases can simply dealt within LLDs as necessary. This patch removes port_mask handling in SFF init helpers. SFF init helpers don't take n_ports argument and interpret it into port_mask anymore. All information is carried via port_info. n_ports argument is dropped and always two ports are allocated. LLD can tell SFF to skip certain port by marking it dummy. Note that SFF code has been treating unuvailable ports this way for a long time until recent breakage fix from Linus and is consistent with how other drivers handle with unavailable ports. This fixes 1-port legacy host handling still broken after the recent native mode fix and simplifies SFF init logic. The following changes are made... * ata_pci_init_native_host() and ata_init_legacy_host() both now try to initialized whatever they can and mark failed ports dummy. They return 0 if any port is successfully initialized. * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't take n_ports argument. All info should be specified via port_info array. Always two ports are allocated. * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases. * port_info handling in all LLDs are standardized - all port_info arrays are const stack variable named ppi. Unless the second port is different from the first, its port_info is specified as NULL (tells libata that it's identical to the last non-NULL port_info). * pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an on-stack copy instead as ata_piix does. * pata_uli: It has 4 ports instead of 2. Don't use ata_pci_prepare_native_host(). Allocate the host explicitly and use init helpers. It's simple enough. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12libata: reimplement suspend/resume support using sdev->manage_start_stopTejun Heo1-13/+1
Reimplement suspend/resume support using sdev->manage_start_stop. * Device suspend/resume is now SCSI layer's responsibility and the code is simplified a lot. * DPM is dropped. This also simplifies code a lot. Suspend/resume status is port-wide now. * ata_scsi_device_suspend/resume() and ata_dev_ready() removed. * Resume now has to wait for disk to spin up before proceeding. I couldn't find easy way out as libata is in EH waiting for the disk to be ready and sd is waiting for EH to complete to issue START_STOP. * sdev->manage_start_stop is set to 1 in ata_scsi_slave_config(). This fixes spindown on shutdown and suspend-to-disk. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12[ARM] 4332/2: KS8695: Serial driverAndrew Victor1-0/+4
A driver for the KS8695 internal UART. Based on the 2.6.9 driver from Micrel. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-12[ARM] 4331/3: Support for Micrel/Kendin KS8695 processorAndrew Victor24-0/+1155
Add core support for the Kendin/Micrel KS8695 processor family. It is an ARM922-T based SoC with integrated USART, 4-port Ethernet Switch, WAN Ethernet port, and optional PCI Host bridge, etc. http://www.micrel.com/page.do?page=product-info/sys_on_chip.jsp This patch is based on earlier patches from Lennert Buytenhek, Ben Dooks and Greg Ungerer posted to the arm-linux-kernel mailing list in March 2006; and Micrel's 2.6.9 port. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-12[ARM] 4372/1: Define byte sizes in asm-arm/sizes.hAndrew Victor1-0/+4
Define SZ_512, SZ_256 and SZ_16 in asm-arm/sizes.h. Remove the definitions from the at91*_devices.c files. (Dependent on ARM patch #4370/2) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-12[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors.Andrew Victor6-0/+223
Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>