summaryrefslogtreecommitdiff
path: root/include/xen
AgeCommit message (Collapse)AuthorFilesLines
2019-11-28Merge branch 'master' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-20dma-mapping: drop the dev argument to arch_sync_dma_for_*Christoph Hellwig1-4/+4
These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-14xen/mcelog: add PPIN to record when availableJan Beulich1-1/+8
This is to augment commit 3f5a7896a5 ("x86/mce: Include the PPIN in MCE records when available"). I'm also adding "synd" and "ipid" fields to struct xen_mce, in an attempt to keep field offsets in sync with struct mce. These two fields won't get populated for now, though. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-14xen/mcelog: drop __MC_MSR_MCGCAPJan Beulich1-1/+0
It has never been part of Xen's public interface, and there's therefore no guarantee for MCG_CAP's value to always be present in array entry 0. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-10-04Merge tag 'for-linus-5.4-rc2-tag' of ↵Linus Torvalds1-24/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks
2019-10-02xen/efi: have a common runtime setup functionJuergen Gross1-24/+1
Today the EFI runtime functions are setup in architecture specific code (x86 and arm), with the functions themselves living in drivers/xen as they are not architecture dependent. As the setup is exactly the same for arm and x86 move the setup to drivers/xen, too. This at once removes the need to make the single functions global visible. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> [boris: "Dropped EXPORT_SYMBOL_GPL(xen_efi_runtime_setup)"] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-09-11swiotlb-xen: simplify cache maintainanceChristoph Hellwig2-63/+5
Now that we know we always have the dma-noncoherent.h helpers available if we are on an architecture with support for non-coherent devices, we can just call them directly, and remove the calls to the dma-direct routines, including the fact that we call the dma_direct_map_page routines but ignore the value returned from it. Instead we now have Xen wrappers for the arch_sync_dma_for_{device,cpu} helpers that call the special Xen versions of those routines for foreign pages. Note that the new helpers get the physical address passed in addition to the dma address to avoid another translation for the local cache maintainance. The pfn_valid checks remain on the dma address as in the old code, even if that looks a little funny. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-09-11swiotlb-xen: use the same foreign page check everywhereChristoph Hellwig1-22/+9
xen_dma_map_page uses a different and more complicated check for foreign pages than the other three cache maintainance helpers. Switch it to the simpler pfn_valid method a well, and document the scheme with a single improved comment in xen_dma_map_page. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: remove xen_dma_opsChristoph Hellwig1-2/+0
arm and arm64 can just use xen_swiotlb_dma_ops directly like x86, no need for a pointer indirection. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: consolidate page-coherent.hChristoph Hellwig1-0/+80
Shared the duplicate arm/arm64 code in include/xen/arm/page-coherent.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-07-31xen: avoid link error on ARMArnd Bergmann1-0/+3
Building the privcmd code as a loadable module on ARM, we get a link error due to the private cache management functions: ERROR: "__sync_icache_dcache" [drivers/xen/xen-privcmd.ko] undefined! Move the code into a new that is always built in when Xen is enabled, as suggested by Juergen Gross and Boris Ostrovsky. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-17xen: remove tmem driverJuergen Gross2-28/+0
The Xen tmem (transcendent memory) driver can be removed, as the related Xen hypervisor feature never made it past the "experimental" state and will be removed in future Xen versions (>= 4.13). The xen-selfballoon driver depends on tmem, so it can be removed, too. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-07-17xen/events: fix binding user event channels to cpusJuergen Gross1-1/+2
When binding an interdomain event channel to a vcpu via IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be bound, but the affinity of the associated IRQi must be changed, too. Otherwise the IRQ and the event channel won't be moved to another vcpu in case the original vcpu they were bound to is going offline. Cc: <stable@vger.kernel.org> # 4.13 Fixes: c48f64ab472389df ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-04-01block: pass page to xen_biovec_phys_mergeableMing Lei1-1/+3
xen_biovec_phys_mergeable() only needs .bv_page of the 2nd bio bvec for checking if the two bvecs can be merged, so pass page to xen_biovec_phys_mergeable() directly. No function change. Cc: ris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: xen-devel@lists.xenproject.org Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-18x86/xen: dont add memory above max allowed allocationJuergen Gross1-0/+4
Don't allow memory to be added above the allowed maximum allocation limit set by Xen. Trying to do so would result in cases like the following: [ 584.559652] ------------[ cut here ]------------ [ 584.564897] WARNING: CPU: 2 PID: 1 at ../arch/x86/xen/multicalls.c:129 xen_alloc_pte+0x1c7/0x390() [ 584.575151] Modules linked in: [ 584.578643] Supported: Yes [ 584.581750] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.4.120-92.70-default #1 [ 584.590000] Hardware name: Cisco Systems Inc UCSC-C460-M4/UCSC-C460-M4, BIOS C460M4.4.0.1b.0.0629181419 06/29/2018 [ 584.601862] 0000000000000000 ffffffff813175a0 0000000000000000 ffffffff8184777c [ 584.610200] ffffffff8107f4e1 ffff880487eb7000 ffff8801862b79c0 ffff88048608d290 [ 584.618537] 0000000000487eb7 ffffea0000000201 ffffffff81009de7 ffffffff81068561 [ 584.626876] Call Trace: [ 584.629699] [<ffffffff81019ad9>] dump_trace+0x59/0x340 [ 584.635645] [<ffffffff81019eaa>] show_stack_log_lvl+0xea/0x170 [ 584.642391] [<ffffffff8101ac51>] show_stack+0x21/0x40 [ 584.648238] [<ffffffff813175a0>] dump_stack+0x5c/0x7c [ 584.654085] [<ffffffff8107f4e1>] warn_slowpath_common+0x81/0xb0 [ 584.660932] [<ffffffff81009de7>] xen_alloc_pte+0x1c7/0x390 [ 584.667289] [<ffffffff810647f0>] pmd_populate_kernel.constprop.6+0x40/0x80 [ 584.675241] [<ffffffff815ecfe8>] phys_pmd_init+0x210/0x255 [ 584.681587] [<ffffffff815ed207>] phys_pud_init+0x1da/0x247 [ 584.687931] [<ffffffff815edb3b>] kernel_physical_mapping_init+0xf5/0x1d4 [ 584.695682] [<ffffffff815e9bdd>] init_memory_mapping+0x18d/0x380 [ 584.702631] [<ffffffff81064699>] arch_add_memory+0x59/0xf0 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-01-24arm64/xen: fix xen-swiotlb cache flushingChristoph Hellwig1-94/+3
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA DMA mapping operations stored in the struct device arch data. Switching arm64 to use the direct calls for the merged DMA direct / swiotlb code broke this scheme. Replace the indirect calls with direct-calls in xen-swiotlb as well to fix this problem. Fixes: 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct") Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2018-12-18xen: Introduce shared buffer helpers for page directory...Oleksandr Andrushchenko1-0/+89
based frontends. Currently the frontends which implement similar code for sharing big buffers between frontend and backend are para-virtualized DRM and sound drivers. Both define the same way to share grant references of a data buffer with the corresponding backend with little differences. Move shared code into a helper module, so there is a single implementation of the same functionality for all. This patch introduces code which is used by sound and display frontend drivers without functional changes with the intention to remove shared code from the corresponding drivers. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-12-13xen/pvh: Add memory map pointer to hvm_start_info structMaran Wilson1-1/+62
The start info structure that is defined as part of the x86/HVM direct boot ABI and used for starting Xen PVH guests would be more versatile if it also included a way to pass information about the memory map to the guest. This would allow KVM guests to share the same entry point. Signed-off-by: Maran Wilson <maran.wilson@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-12-13xen/pvh: Move Xen specific PVH VM initialization out of common fileMaran Wilson1-0/+3
We need to refactor PVH entry code so that support for other hypervisors like Qemu/KVM can be added more easily. This patch moves the small block of code used for initializing Xen PVH virtual machines into the Xen specific file. This initialization is not going to be needed for Qemu/KVM guests. Moving it out of the common file is going to allow us to compile kernels in the future without CONFIG_XEN that are still capable of being booted as a Qemu/KVM guest via the PVH entry point. Signed-off-by: Maran Wilson <maran.wilson@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-11-29Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"Igor Druzhinin1-5/+0
This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f. That commit unintentionally broke Xen balloon memory hotplug with "hotplug_unpopulated" set to 1. As long as "System RAM" resource got assigned under a new "Unusable memory" resource in IO/Mem tree any attempt to online this memory would fail due to general kernel restrictions on having "System RAM" resources as 1st level only. The original issue that commit has tried to workaround fa564ad96366 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move and shrink AMD 64-bit window to avoid conflict") which made the original fix to Xen ballooning unnecessary. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-11-02CONFIG_XEN_PV breaks xen_create_contiguous_region on ARMStefano Stabellini1-5/+7
xen_create_contiguous_region has now only an implementation if CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but we do have an implementation of xen_create_contiguous_region which is required for swiotlb-xen to work correctly (although it just sets *dma_handle). Cc: <stable@vger.kernel.org> # 4.12 Fixes: 16624390816c ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds") Signed-off-by: Stefano Stabellini <stefanos@xilinx.com> Reviewed-by: Juergen Gross <jgross@suse.com> CC: Jeff.Kubascik@dornerworks.com CC: Jarvis.Roach@dornerworks.com CC: Nathan.Studer@dornerworks.com CC: vkuznets@redhat.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: julien.grall@arm.com Signed-off-by: Juergen Gross <jgross@suse.com>
2018-10-23Merge branch 'x86-paravirt-for-linus' of ↵Linus Torvalds3-51/+90
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt updates from Ingo Molnar: "Two main changes: - Remove no longer used parts of the paravirt infrastructure and put large quantities of paravirt ops under a new config option PARAVIRT_XXL=y, which is selected by XEN_PV only. (Joergen Gross) - Enable PV spinlocks on Hyperv (Yi Sun)" * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Enable PV qspinlock for Hyper-V x86/hyperv: Add GUEST_IDLE_MSR support x86/paravirt: Clean up native_patch() x86/paravirt: Prevent redefinition of SAVE_FLAGS macro x86/xen: Make xen_reservation_lock static x86/paravirt: Remove unneeded mmu related paravirt ops bits x86/paravirt: Move the Xen-only pv_mmu_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move the pv_irq_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move the Xen-only pv_cpu_ops under the PARAVIRT_XXL umbrella x86/paravirt: Move items in pv_info under PARAVIRT_XXL umbrella x86/paravirt: Introduce new config option PARAVIRT_XXL x86/paravirt: Remove unused paravirt bits x86/paravirt: Use a single ops structure x86/paravirt: Remove clobbers from struct paravirt_patch_site x86/paravirt: Remove clobbers parameter from paravirt patch functions x86/paravirt: Make paravirt_patch_call() and paravirt_patch_jmp() static x86/xen: Add SPDX identifier in arch/x86/xen files x86/xen: Link platform-pci-unplug.o only if CONFIG_XEN_PVHVM x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c x86/xen: Move pv irq related functions under CONFIG_XEN_PV umbrella
2018-10-01Merge tag 'v4.19-rc6' into for-4.20/blockJens Axboe1-3/+4
Merge -rc6 in, for two reasons: 1) Resolve a trivial conflict in the blk-mq-tag.c documentation 2) A few important regression fixes went into upstream directly, so they aren't in the 4.20 branch. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v4.19-rc6': (780 commits) Linux 4.19-rc6 MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c cpufreq: qcom-kryo: Fix section annotations perf/core: Add sanity check to deal with pinned event failure xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" selftests/powerpc: Fix Makefiles for headers_install change blk-mq: I/O and timer unplugs are inverted in blktrace dax: Fix deadlock in dax_lock_mapping_entry() x86/boot: Fix kexec booting failure in the SEV bit detection code bcache: add separate workqueue for journal_write to avoid deadlock drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" xen/blkfront: When purging persistent grants, keep them in the buffer clocksource/drivers/timer-atmel-pit: Properly handle error cases block: fix deadline elevator drain for zoned block devices ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-26xen: provide a prototype for xen_biovec_phys_mergeable in xen.hChristoph Hellwig1-0/+4
Having multiple externs in arch headers is not a good way to provide a common interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-14xen/balloon: add runtime control for scrubbing ballooned out pagesMarek Marczykowski-Górecki1-3/+4
Scrubbing pages on initial balloon down can take some time, especially in nested virtualization case (nested EPT is slow). When HVM/PVH guest is started with memory= significantly lower than maxmem=, all the extra pages will be scrubbed before returning to Xen. But since most of them weren't used at all at that point, Xen needs to populate them first (from populate-on-demand pool). In nested virt case (Xen inside KVM) this slows down the guest boot by 15-30s with just 1.5GB needed to be returned to Xen. Add runtime parameter to enable/disable it, to allow initially disabling scrubbing, then enable it back during boot (for example in initramfs). Such usage relies on assumption that a) most pages ballooned out during initial boot weren't used at all, and b) even if they were, very few secrets are in the guest at that time (before any serious userspace kicks in). Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also enabled by default), controlling default value for the new runtime switch. Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-09-03x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.cJuergen Gross2-51/+88
There are some PV specific functions in arch/x86/xen/mmu.c which can be moved to mmu_pv.c. This in turn enables to build multicalls.c dependent on CONFIG_XEN_PV. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: virtualization@lists.linux-foundation.org Cc: akataria@vmware.com Cc: rusty@rustcorp.com.au Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180828074026.820-3-jgross@suse.com
2018-09-03x86/xen: Move pv irq related functions under CONFIG_XEN_PV umbrellaJuergen Gross1-0/+2
All functions in arch/x86/xen/irq.c and arch/x86/xen/xen-asm*.S are specific to PV guests. Include them in the kernel with CONFIG_XEN_PV only. Make the PV specific code in arch/x86/entry/entry_*.S dependent on CONFIG_XEN_PV instead of CONFIG_XEN. The HVM specific code should depend on CONFIG_XEN_PVHVM. While at it reformat the Makefile to make it more readable. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: virtualization@lists.linux-foundation.org Cc: akataria@vmware.com Cc: rusty@rustcorp.com.au Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180828074026.820-2-jgross@suse.com
2018-08-19Merge branch 'for-linus' of ↵Linus Torvalds3-25/+71
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...
2018-07-27xen/grant-table: Allow allocating buffers suitable for DMAOleksandr Andrushchenko1-0/+18
Extend grant table module API to allow allocating buffers that can be used for DMA operations and mapping foreign grant references on top of those. The resulting buffer is similar to the one allocated by the balloon driver in that proper memory reservation is made by ({increase|decrease}_reservation and VA mappings are updated if needed). This is useful for sharing foreign buffers with HW drivers which cannot work with scattered buffers provided by the balloon driver, but require DMAable memory instead. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-27xen/balloon: Share common memory reservation routinesOleksandr Andrushchenko1-0/+59
Memory {increase|decrease}_reservation and VA mappings update/reset code used in balloon driver can be made common, so other drivers can also re-use the same functionality without open-coding. Create a dedicated file for the shared code and export corresponding symbols for other kernel modules. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-27xen/grant-table: Make set/clear page private code sharedOleksandr Andrushchenko1-0/+3
Make set/clear page private code shared and accessible to other kernel modules which can re-use these instead of open-coding. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-06-23Merge tag 'for-linus-4.18-rc2-tag' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains the following fixes/cleanups: - the removal of a BUG_ON() which wasn't necessary and which could trigger now due to a recent change - a correction of a long standing bug happening very rarely in Xen dom0 when a hypercall buffer from user land was not accessible by the hypervisor for very short periods of time due to e.g. page migration or compaction - usage of EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() in a Xen-related driver (no breakage possible as using those symbols without others already exported via EXPORT-SYMBOL_GPL() wouldn't make any sense) - a simplification for Xen PVH or Xen ARM guests - some additional error handling for callers of xenbus_printf()" * tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Remove unnecessary BUG_ON from __unbind_from_irq() xen: add new hypercall buffer mapping device xen/scsiback: add error handling for xenbus_printf scsi: xen-scsifront: add error handling for xenbus_printf xen/grant-table: Export gnttab_{alloc|free}_pages as GPL xen: add error handling for xenbus_printf xen: share start flags between PV and PVH
2018-06-19xen: share start flags between PV and PVHRoger Pau Monne1-1/+5
Use a global variable to store the start flags for both PV and PVH. This allows the xen_initial_domain macro to work properly on PVH. Note that ARM is also switched to use the new variable. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-16docs: Fix some broken referencesMauro Carvalho Chehab1-1/+1
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-13xen: Sync up with the canonical protocol definitions in XenOleksandr Andrushchenko3-25/+71
This is the sync up with the canonical definitions of the input, sound and display protocols in Xen. Changes to kbdif: 1. Add missing string constants for {feature|request}-raw-pointer to align with the rest of the interface file. 2. Add new XenStore feature fields, so it is possible to individually control set of exposed virtual devices for each guest OS: - set feature-disable-keyboard to 1 if no keyboard device needs to be created - set feature-disable-pointer to 1 if no pointer device needs to be created 3. Move multi-touch device parameters to backend nodes: these are described as a part of frontend's XenBus configuration nodes while they belong to backend's configuration. Fix this by moving the parameters to the proper section. Unique-id field: 1. Add unique-id XenBus entry for virtual input and display. 2. Change type of unique-id field to string for sndif to align with display and input protocols. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-14xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCEPaul Durrant3-4/+93
My recent Xen patch series introduces a new HYPERVISOR_memory_op to support direct priv-mapping of certain guest resources (such as ioreq pages, used by emulators) by a tools domain, rather than having to access such resources via the guest P2M. This patch adds the necessary infrastructure to the privcmd driver and Xen MMU code to support direct resource mapping. NOTE: The adjustment in the MMU code is partially cosmetic. Xen will now allow a PV tools domain to map guest pages either by GFN or MFN, thus the term 'mfn' has been swapped for 'pfn' in the lower layers of the remap code. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-04-17xen/sndif: Sync up with the canonical definition in XenOleksandr Andrushchenko1-16/+306
This is the sync up with the canonical definition of the sound protocol in Xen: 1. Protocol version was referenced in the protocol description, but missed its definition. Fixed by adding a constant for current protocol version. 2. Some of the request descriptions have "reserved" fields missed: fixed by adding corresponding entries. 3. Extend the size of the requests and responses to 64 octets. Bump protocol version to 2. 4. Add explicit back and front synchronization In order to provide explicit synchronization between backend and frontend the following changes are introduced in the protocol: - add new ring buffer for sending asynchronous events from backend to frontend to report number of bytes played by the frontend (XENSND_EVT_CUR_POS) - introduce trigger events for playback control: start/stop/pause/resume - add "req-" prefix to event-channel and ring-ref to unify naming of the Xen event channels for requests and events 5. Add explicit back and front parameter negotiation In order to provide explicit stream parameter negotiation between backend and frontend the following changes are introduced in the protocol: add XENSND_OP_HW_PARAM_QUERY request to read/update configuration space for the parameters given: request passes desired parameter's intervals/masks and the response to this request returns allowed min/max intervals/masks to be used. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-10xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to XenBoris Ostrovsky1-0/+23
Pre-4.17 kernels ignored start_info's rsdp_paddr pointer and instead relied on finding RSDP in standard location in BIOS RO memory. This has worked since that's where Xen used to place it. However, with recent Xen change (commit 4a5733771e6f ("libxl: put RSDP for PVH guest near 4GB")) it prefers to keep RSDP at a "non-standard" address. Even though as of commit b17d9d1df3c3 ("x86/xen: Add pvh specific rsdp address retrieval function") Linux is able to find RSDP, for back-compatibility reasons we need to indicate to Xen that we can handle this, an we do so by setting XENFEAT_linux_rsdp_unrestricted flag in ELF notes. (Also take this opportunity and sync features.h header file with Xen) Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com>
2017-12-22Merge tag 'for-linus-4.15-rc5-tag' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two fixes for running under Xen: - a fix avoiding resource conflicts between adding mmio areas and memory hotplug - a fix setting NX bits in page table entries copied from Xen when running a PV guest" * tag 'for-linus-4.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Mark unallocated host memory as UNUSABLE x86-64/Xen: eliminate W+X mappings
2017-12-20xen/balloon: Mark unallocated host memory as UNUSABLEBoris Ostrovsky1-0/+5
Commit f5775e0b6116 ("x86/xen: discard RAM regions above the maximum reservation") left host memory not assigned to dom0 as available for memory hotplug. Unfortunately this also meant that those regions could be used by others. Specifically, commit fa564ad96366 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") may try to map those addresses as MMIO. To prevent this mark unallocated host memory as E820_TYPE_UNUSABLE (thus effectively reverting f5775e0b6116) and keep track of that region as a hostmem resource that can be used for the hotplug. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2017-11-17Merge tag 'for-linus-4.15-rc1-tag' of ↵Linus Torvalds3-1/+71
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen features and fixes for v4.15-rc1 Apart from several small fixes it contains the following features: - a series by Joao Martins to add vdso support of the pv clock interface - a series by Juergen Gross to add support for Xen pv guests to be able to run on 5 level paging hosts - a series by Stefano Stabellini adding the Xen pvcalls frontend driver using a paravirtualized socket interface" * tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits) xen/pvcalls: fix potential endless loop in pvcalls-front.c xen/pvcalls: Add MODULE_LICENSE() MAINTAINERS: xen, kvm: track pvclock-abi.h changes x86/xen/time: setup vcpu 0 time info page x86/xen/time: set pvclock flags on xen_time_init() x86/pvclock: add setter for pvclock_pvti_cpu0_va ptp_kvm: probe for kvm guest availability xen/privcmd: remove unused variable pageidx xen: select grant interface version xen: update arch/x86/include/asm/xen/cpuid.h xen: add grant interface version dependent constants to gnttab_ops xen: limit grant v2 interface to the v1 functionality xen: re-introduce support for grant v2 interface xen: support priv-mapping in an HVM tools domain xen/pvcalls: remove redundant check for irq >= 0 xen/pvcalls: fix unsigned less than zero error check xen/time: Return -ENODEV from xen_get_wallclock() xen/pvcalls-front: mark expected switch fall-through xen: xenbus_probe_frontend: mark expected switch fall-throughs xen/time: do not decrease steal time after live migration on xen ...
2017-11-09x86/xen/time: setup vcpu 0 time info pageJoao Martins1-0/+42
In order to support pvclock vdso on xen we need to setup the time info page for vcpu 0 and register the page with Xen using the VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall will also forcefully update the pvti which will set some of the necessary flags for vdso. Afterwards we check if it supports the PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having vdso/vsyscall support. And if so, it will set the cpu 0 pvti that will be later on used when mapping the vdso image. The xen headers are also updated to include the new hypercall for registering the secondary vcpu_time_info struct. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-06xen: limit grant v2 interface to the v1 functionalityJuergen Gross1-25/+0
As there is currently no user for sub-page grants or transient grants remove that functionality. This at once makes it possible to switch from grant v2 to grant v1 without restrictions, as there is no loss of functionality other than the limited frame number width related to the switch. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-06xen: re-introduce support for grant v2 interfaceJuergen Gross1-1/+29
The grant v2 support was removed from the kernel with commit 438b33c7145ca8a5131a30c36d8f59bce119a19a ("xen/grant-table: remove support for V2 tables") as the higher memory footprint of v2 grants resulted in less grants being possible for a kernel compared to the v1 grant interface. As machines with more than 16TB of memory are expected to be more common in the near future support of grant v2 is mandatory in order to be able to run a Xen pv domain at any memory location. So re-add grant v2 support basically by reverting above commit. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-03xen: support priv-mapping in an HVM tools domainPaul Durrant1-0/+24
If the domain has XENFEAT_auto_translated_physmap then use of the PV- specific HYPERVISOR_mmu_update hypercall is clearly incorrect. This patch adds checks in xen_remap_domain_gfn_array() and xen_unmap_domain_gfn_array() which call through to the approprate xlate_mmu function if the feature is present. A check is also added to xen_remap_domain_gfn_range() to fail with -EOPNOTSUPP since this should not be used in an HVM tools domain. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-02xen/time: do not decrease steal time after live migration on xenDongli Zhang1-0/+1
After guest live migration on xen, steal time in /proc/stat (cpustat[CPUTIME_STEAL]) might decrease because steal returned by xen_steal_lock() might be less than this_rq()->prev_steal_time which is derived from previous return value of xen_steal_clock(). For instance, steal time of each vcpu is 335 before live migration. cpu 198 0 368 200064 1962 0 0 1340 0 0 cpu0 38 0 81 50063 492 0 0 335 0 0 cpu1 65 0 97 49763 634 0 0 335 0 0 cpu2 38 0 81 50098 462 0 0 335 0 0 cpu3 56 0 107 50138 374 0 0 335 0 0 After live migration, steal time is reduced to 312. cpu 200 0 370 200330 1971 0 0 1248 0 0 cpu0 38 0 82 50123 500 0 0 312 0 0 cpu1 65 0 97 49832 634 0 0 312 0 0 cpu2 39 0 82 50167 462 0 0 312 0 0 cpu3 56 0 107 50207 374 0 0 312 0 0 Since runstate times are cumulative and cleared during xen live migration by xen hypervisor, the idea of this patch is to accumulate runstate times to global percpu variables before live migration suspend. Once guest VM is resumed, xen_get_runstate_snapshot_cpu() would always return the sum of new runstate times and previously accumulated times stored in global percpu variables. Comment above HYPERVISOR_suspend() has been removed as it is inaccurate: the call can return an error code (e.g., possibly -EPERM in the future). Similar and more severe issue would impact prior linux 4.8-4.10 as discussed by Michael Las at https://0xstubs.org/debugging-a-flaky-cpu-steal-time-counter-on-a-paravirtualized-xen-guest, which would overflow steal time and lead to 100% st usage in top command for linux 4.8-4.10. A backport of this patch would fix that issue. [boris: added linux/slab.h to driver/xen/time.c, slightly reformatted commit message] References: https://0xstubs.org/debugging-a-flaky-cpu-steal-time-counter-on-a-paravirtualized-xen-guest Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman27-0/+27
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-19xen, arm64: drop dummy lookup_address()Tycho Andersen1-10/+0
This is unused, and conflicts with the definition that we'll add for XPFO. Signed-off-by: Tycho Andersen <tycho@docker.com> Reviewed-by: Julien Grall <julien.grall@arm.com> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: Juergen Gross <jgross@suse.com> CC: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-08-31xen: cleanup xen.hJuergen Gross1-11/+9
The macros for testing domain types are more complicated then they need to. Simplify them. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-08-31xen: introduce the pvcalls interface headerStefano Stabellini2-0/+123
Introduce the C header file which defines the PV Calls interface. It is imported from xen/include/public/io/pvcalls.h. Signed-off-by: Stefano Stabellini <stefano@aporeto.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> CC: konrad.wilk@oracle.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>