summaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)AuthorFilesLines
2022-10-07cfg80211: Update Transition Disable policy during port authorizationVinayak Yadawad1-0/+3
In case of 4way handshake offload, transition disable policy updated by the AP during EAPOL 3/4 is not updated to the upper layer. This results in mismatch between transition disable policy between the upper layer and the driver. This patch addresses this issue by updating transition disable policy as part of port authorization indication. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07Merge tag 'for-6.1-tag' of ↵Linus Torvalds2-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "There's a bunch of performance improvements, most notably the FIEMAP speedup, the new block group tree to speed up mount on large filesystems, more io_uring integration, some sysfs exports and the usual fixes and core updates. Summary: Performance: - outstanding FIEMAP speed improvement - algorithmic change how extents are enumerated leads to orders of magnitude speed boost (uncached and cached) - extent sharing check speedup (2.2x uncached, 3x cached) - add more cancellation points, allowing to interrupt seeking in files with large number of extents - more efficient hole and data seeking (4x uncached, 1.3x cached) - sample results: 256M, 32K extents: 4s -> 29ms (~150x) 512M, 64K extents: 30s -> 59ms (~550x) 1G, 128K extents: 225s -> 120ms (~1800x) - improved inode logging, especially for directories (on dbench workload throughput +25%, max latency -21%) - improved buffered IO, remove redundant extent state tracking, lowering memory consumption and avoiding rb tree traversal - add sysfs tunable to let qgroup temporarily skip exact accounting when deleting snapshot, leading to a speedup but requiring a rescan after that, will be used by snapper - support io_uring and buffered writes, until now it was just for direct IO, with the no-wait semantics implemented in the buffered write path it now works and leads to speed improvement in IOPS (2x), throughput (2.2x), latency (depends, 2x to 150x) - small performance improvements when dropping and searching for extent maps as well as when flushing delalloc in COW mode (throughput +5MB/s) User visible changes: - new incompatible feature block-group-tree adding a dedicated tree for tracking block groups, this allows a much faster load during mount and avoids seeking unlike when it's scattered in the extent tree items - this reduces mount time for many-terabyte sized filesystems - conversion tool will be provided so existing filesystem can also be updated in place - to reduce test matrix and feature combinations requires no-holes and free-space-tree (mkfs defaults since 5.15) - improved reporting of super block corruption detected by scrub - scrub also tries to repair super block and does not wait until next commit - discard stats and tunables are exported in sysfs (/sys/fs/btrfs/FSID/discard) - qgroup status is exported in sysfs (/sys/sys/fs/btrfs/FSID/qgroups/) - verify that super block was not modified when thawing filesystem Fixes: - FIEMAP fixes - fix extent sharing status, does not depend on the cached status where merged - flush delalloc so compressed extents are reported correctly - fix alignment of VMA for memory mapped files on THP - send: fix failures when processing inodes with no links (orphan files and directories) - fix race between quota enable and quota rescan ioctl - handle more corner cases for read-only compat feature verification - fix missed extent on fsync after dropping extent maps Core: - lockdep annotations to validate various transactions states and state transitions - preliminary support for fs-verity in send - more effective memory use in scrub for subpage where sector is smaller than page - block group caching progress logic has been removed, load is now synchronous - simplify end IO callbacks and bio handling, use chained bios instead of own tracking - add no-wait semantics to several functions (tree search, nocow, flushing, buffered write - cleanups and refactoring MM changes: - export balance_dirty_pages_ratelimited_flags" * tag 'for-6.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (177 commits) btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer btrfs: drop extent map range more efficiently btrfs: avoid pointless extent map tree search when flushing delalloc btrfs: remove unnecessary next extent map search btrfs: remove unnecessary NULL pointer checks when searching extent maps btrfs: assert tree is locked when clearing extent map from logging btrfs: remove unnecessary extent map initializations btrfs: remove the refcount warning/check at free_extent_map() btrfs: add helper to replace extent map range with a new extent map btrfs: move open coded extent map tree deletion out of inode eviction btrfs: use cond_resched_rwlock_write() during inode eviction btrfs: use extent_map_end() at btrfs_drop_extent_map_range() btrfs: move btrfs_drop_extent_cache() to extent_map.c btrfs: fix missed extent on fsync after dropping extent maps btrfs: remove stale prototype of btrfs_write_inode btrfs: enable nowait async buffered writes btrfs: assert nowait mode is not used for some btree search functions btrfs: make btrfs_buffered_write nowait compatible btrfs: plumb NOWAIT through the write path btrfs: make lock_and_cleanup_extent_if_need nowait compatible ...
2022-10-07Merge tag 'v6.0' into rdma.git for-nextJason Gunthorpe6-36/+36
Trvial merge conflicts against rdma.git for-rc resolved matching linux-next: drivers/infiniband/hw/hns/hns_roce_hw_v2.c drivers/infiniband/hw/hns/hns_roce_main.c https://lore.kernel.org/r/20220929124005.105149-1-broonie@kernel.org Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-10-06Merge tag 'arm-drivers-6.1' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...
2022-10-06drm/fourcc: add Vivante tile status modifiersLucas Stach1-0/+29
The tile status modifiers can be combined with all of the usual color buffer modifiers. When they are present an additional plane is added to the surfaces to share the tile status buffer. The TS modifiers describe the interpretation of the tag bits in this buffer. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220909093000.3458413-1-l.stach@pengutronix.de
2022-10-06bpf: explicitly define BPF_FUNC_xxx integer valuesAndrii Nakryiko1-213/+219
Historically enum bpf_func_id's BPF_FUNC_xxx enumerators relied on implicit sequential values being assigned by compiler. This is convenient, as new BPF helpers are always added at the very end, but it also has its downsides, some of them being: - with over 200 helpers now it's very hard to know what's each helper's ID, which is often important to know when working with BPF assembly (e.g., by dumping raw bpf assembly instructions with llvm-objdump -d command). it's possible to work around this by looking into vmlinux.h, dumping /sys/btf/kernel/vmlinux, looking at libbpf-provided bpf_helper_defs.h, etc. But it always feels like an unnecessary step and one should be able to quickly figure this out from UAPI header. - when backporting and cherry-picking only some BPF helpers onto older kernels it's important to be able to skip some enum values for helpers that weren't backported, but preserve absolute integer IDs to keep BPF helper IDs stable so that BPF programs stay portable across upstream and backported kernels. While neither problem is insurmountable, they come up frequently enough and are annoying enough to warrant improving the situation. And for the backporting the problem can easily go unnoticed for a while, especially if backport is done with people not very familiar with BPF subsystem overall. Anyways, it's easy to fix this by making sure that __BPF_FUNC_MAPPER macro provides explicit helper IDs. Unfortunately that would potentially break existing users that use UAPI-exposed __BPF_FUNC_MAPPER and are expected to pass macro that accepts only symbolic helper identifier (e.g., map_lookup_elem for bpf_map_lookup_elem() helper). As such, we need to introduce a new macro (___BPF_FUNC_MAPPER) which would specify both identifier and integer ID, but in such a way as to allow existing __BPF_FUNC_MAPPER be expressed in terms of new ___BPF_FUNC_MAPPER macro. And that's what this patch is doing. To avoid duplication and allow __BPF_FUNC_MAPPER stay *exactly* the same, ___BPF_FUNC_MAPPER accepts arbitrary "context" arguments, which can be used to pass any extra macros, arguments, and whatnot. In our case we use this to pass original user-provided macro that expects single argument and __BPF_FUNC_MAPPER is using it's own three-argument __BPF_FUNC_MAPPER_APPLY intermediate macro to impedance-match new and old "callback" macros. Once we resolve this, we use new ___BPF_FUNC_MAPPER to define enum bpf_func_id with explicit values. The other users of __BPF_FUNC_MAPPER in kernel (namely in kernel/bpf/disasm.c) are kept exactly the same both as demonstration that backwards compat works, but also to avoid unnecessary code churn. Note that new ___BPF_FUNC_MAPPER() doesn't forcefully insert comma between values, as that might not be appropriate in all possible cases where ___BPF_FUNC_MAPPER might be used by users. This doesn't reduce usability, as it's trivial to insert that comma inside "callback" macro. To validate all the manually specified IDs are exactly right, we used BTF to compare before and after values: $ bpftool btf dump file ~/linux-build/default/vmlinux | rg bpf_func_id -A 211 > after.txt $ git stash # stach UAPI changes $ make -j90 ... re-building kernel without UAPI changes ... $ bpftool btf dump file ~/linux-build/default/vmlinux | rg bpf_func_id -A 211 > before.txt $ diff -u before.txt after.txt --- before.txt 2022-10-05 10:48:18.119195916 -0700 +++ after.txt 2022-10-05 10:46:49.446615025 -0700 @@ -1,4 +1,4 @@ -[14576] ENUM 'bpf_func_id' encoding=UNSIGNED size=4 vlen=211 +[9560] ENUM 'bpf_func_id' encoding=UNSIGNED size=4 vlen=211 'BPF_FUNC_unspec' val=0 'BPF_FUNC_map_lookup_elem' val=1 'BPF_FUNC_map_update_elem' val=2 As can be seen from diff above, the only thing that changed was resulting BTF type ID of ENUM bpf_func_id, not any of the enumerators, their names or integer values. The only other place that needed fixing was scripts/bpf_doc.py used to generate man pages and bpf_helper_defs.h header for libbpf and selftests. That script is tightly-coupled to exact shape of ___BPF_FUNC_MAPPER macro definition, so had to be trivially adapted. Cc: Quentin Monnet <quentin@isovalent.com> Reported-by: Andrea Terzolo <andrea.terzolo@polito.it> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221006042452.2089843-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-05Merge tag 'sound-6.1-rc1' of ↵Linus Torvalds14-214/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The majority of changes are ASoC drivers (SOF, Intel, AMD, Mediatek, Qualcomm, TI, Apple Silicon, etc), while we see a few small fixes in ALSA / ASoC core side, too. Here are highlights: Core: - A new string helper parse_int_array_user() and cleanups with it - Continued cleanup of memory allocation helpers - PCM core optimization and hardening - Continued ASoC core code cleanups ASoC: - Improvements to the SOF IPC4 code, especially around trace - Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake, Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450 and Texas Instruments SRC4392 HD- and USB-audio: - Cleanups for unification of hda-ext bus - HD-audio HDMI codec driver cleanups - Continued endpoint management fixes for USB-audio - New quirks as usual" * tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (422 commits) ALSA: hda: Fix position reporting on Poulsbo ALSA: hda/hdmi: Don't skip notification handling during PM operation ASoC: rockchip: i2s: use regmap_read_poll_timeout_atomic to poll I2S_CLR ASoC: dt-bindings: Document audio OF graph dai-tdm-slot-num dai-tdm-slot-width props ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6 ALSA: usb-audio: Fix potential memory leaks ALSA: usb-audio: Fix NULL dererence at error path ASoC: mediatek: mt8192-mt6359: Set the driver name for the card ALSA: hda/realtek: More robust component matching for CS35L41 ASoC: Intel: sof_rt5682: remove SOF_RT1015_SPEAKER_AMP_100FS flag ASoC: nau8825: Add TDM support ASoC: core: clarify the driver name initialization ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()" ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select" ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model ALSA: asihpi - Remove unused struct hpi_subsys_response ...
2022-10-05Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds4-8/+89
Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
2022-10-05Merge branch 'for-6.1/logitech' into for-linusBenjamin Tissoires31-41/+450
- Add hanlding of all Bluetooth HID++ devices and fixes in hid++ (Bastien Nocera)
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds30-340/+446
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-04Merge tag 'landlock-6.1-rc1' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "Improve user help for Landlock (documentation and sample)" * tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Fix documentation style landlock: Slightly improve documentation and fix spelling samples/landlock: Print hints about ABI versions
2022-10-04drm: document uAPI page-flip flagsSimon Ser1-1/+62
Document flags accepted by the page-flip and atomic IOCTLs. v2 (Pekka): - Mention DRM_EVENT_FLIP_COMPLETE in DRM_MODE_PAGE_FLIP_EVENT docs. - Expand DRM_MODE_ATOMIC_NONBLOCK and DRM_MODE_ATOMIC_ALLOW_MODESET description. v3: - Fix struct field ref syntax (Daniel) - Clarify when artifacts are no longer displayed (Daniel) - Add note about sinks deciding to show artifacts on their own (Pekka, Daniel) v4: - Fix typo (Pekka) Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/505107/
2022-10-04Merge tag 'statx-dioalign-for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull STATX_DIOALIGN support from Eric Biggers: "Make statx() support reporting direct I/O (DIO) alignment information. This provides a generic interface for userspace programs to determine whether a file supports DIO, and if so with what alignment restrictions. Specifically, STATX_DIOALIGN works on block devices, and on regular files when their containing filesystem has implemented support. An interface like this has been requested for years, since the conditions for when DIO is supported in Linux have gotten increasingly complex over time. Today, DIO support and alignment requirements can be affected by various filesystem features such as multi-device support, data journalling, inline data, encryption, verity, compression, checkpoint disabling, log-structured mode, etc. Further complicating things, Linux v6.0 relaxed the traditional rule of DIO needing to be aligned to the block device's logical block size; now user buffers (but not file offsets) only need to be aligned to the DMA alignment. The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was discarded in favor of creating a clean new interface with statx(). For more information, see the individual commits and the man page update[1]" Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1] * tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: xfs: support STATX_DIOALIGN f2fs: support STATX_DIOALIGN f2fs: simplify f2fs_force_buffered_io() f2fs: move f2fs_force_buffered_io() into file.c ext4: support STATX_DIOALIGN fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN vfs: support STATX_DIOALIGN on block devices statx: add direct I/O alignment information
2022-10-04Merge tag 'dlm-6.1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: - Fix a couple races found with a new torture test - Improve errors when api functions are used incorrectly - Improve tracing for lock requests from user space - Fix use after free in recently added tracing cod. - Small internal code cleanups * tag 'dlm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: fs: dlm: fix possible use after free if tracing fs: dlm: const void resource name parameter fs: dlm: LSFL_CB_DELAY only for kernel lockspaces fs: dlm: remove DLM_LSFL_FS from uapi fs: dlm: trace user space callbacks fs: dlm: change ls_clear_proc_locks to spinlock fs: dlm: remove dlm_del_ast prototype fs: dlm: handle rcom in else if branch fs: dlm: allow lockspaces have zero lvblen fs: dlm: fix invalid derefence of sb_lvbptr fs: dlm: handle -EINVAL as log_error() fs: dlm: use __func__ for function name fs: dlm: handle -EBUSY first in unlock validation fs: dlm: handle -EBUSY first in lock arg validation fs: dlm: fix race between test_bit() and queue_work() fs: dlm: fix race in lowcomms
2022-10-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+5
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-04ethtool: add interface to interact with Ethernet Power EquipmentOleksij Rempel2-0/+61
Add interface to support Power Sourcing Equipment. At current step it provides generic way to address all variants of PSE devices as defined in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4 PoDL Power Sourcing Equipment (PSE). Currently supported and mandatory objects are: IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl This is minimal interface needed to control PSE on each separate ethernet port but it provides not all mandatory objects specified in IEEE 802.3-2018. Since "PoDL PSE" and "PSE" have similar names, but some different values I decide to not merge them and keep separate naming schema. This should allow as to be as close to IEEE 802.3 spec as possible and avoid name conflicts in the future. This implementation is connected to PHYs instead of MACs because PSE auto classification can potentially interfere with PHY auto negotiation. So, may be some extra PHY related initialization will be needed. With WIP version of ethtools interaction with PSE capable link looks as following: $ ip l ... 5: t1l1@eth0: <BROADCAST,MULTICAST> .. ... $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: disabled PoDL PSE Power Detection Status: disabled $ ethtool --set-pse t1l1 podl-pse-admin-control enable $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: enabled PoDL PSE Power Detection Status: delivering power Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-2/+5
Daniel Borkmann says: ==================== pull-request: bpf 2022-10-03 We've added 10 non-merge commits during the last 23 day(s) which contain a total of 14 files changed, 130 insertions(+), 69 deletions(-). The main changes are: 1) Fix dynptr helper API to gate behind CAP_BPF given it was not intended for unprivileged BPF programs, from Kumar Kartikeya Dwivedi. 2) Fix need_wakeup flag inheritance from umem buffer pool for shared xsk sockets, from Jalal Mostafa. 3) Fix truncated last_member_type_id in btf_struct_resolve() which had a wrong storage type, from Lorenz Bauer. 4) Fix xsk back-pressure mechanism on tx when amount of produced descriptors to CQ is lower than what was grabbed from xsk tx ring, from Maciej Fijalkowski. 5) Fix wrong cgroup attach flags being displayed to effective progs, from Pu Lehui. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Inherit need_wakeup flag for shared sockets bpf: Gate dynptr API behind CAP_BPF selftests/bpf: Adapt cgroup effective query uapi change bpftool: Fix wrong cgroup attach flags being assigned to effective progs bpf, cgroup: Reject prog_attach_flags array when effective query bpf: Ensure correct locking around vulnerable function find_vpid() bpf: btf: fix truncated last_member_type_id in btf_struct_resolve selftests/xsk: Add missing close() on netns fd xsk: Fix backpressure mechanism on Tx MAINTAINERS: Add include/linux/tnum.h to BPF CORE ==================== Link: https://lore.kernel.org/r/20221003201957.13149-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-04hugetlb_encode.h: fix undefined behaviour (34 << 26)Matthias Goergens1-13/+13
Left-shifting past the size of your datatype is undefined behaviour in C. The literal 34 gets the type `int`, and that one is not big enough to be left shifted by 26 bits. An `unsigned` is long enough (on any machine that has at least 32 bits for their ints.) For uniformity, we mark all the literals as unsigned. But it's only really needed for HUGETLB_FLAG_ENCODE_16GB. Thanks to Randy Dunlap for an initial review and suggestion. Link: https://lkml.kernel.org/r/20220905031904.150925-1-matthias.goergens@gmail.com Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-03Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-4/+55
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-10-03 We've added 143 non-merge commits during the last 27 day(s) which contain a total of 151 files changed, 8321 insertions(+), 1402 deletions(-). The main changes are: 1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu. 2) Add support for struct-based arguments for trampoline based BPF programs, from Yonghong Song. 3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa. 4) Batch of improvements to veristat selftest tool in particular to add CSV output, a comparison mode for CSV outputs and filtering, from Andrii Nakryiko. 5) Add preparatory changes needed for the BPF core for upcoming BPF HID support, from Benjamin Tissoires. 6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program types, from Daniel Xu. 7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler. 8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer / single-kernel-consumer semantics for BPF ring buffer, from David Vernet. 9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF hashtab's bucket lock, from Hou Tao. 10) Allow creating an iterator that loops through only the resources of one task/thread instead of all, from Kui-Feng Lee. 11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi. 12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT entry which is not yet inserted, from Lorenzo Bianconi. 13) Remove invalid recursion check for struct_ops for TCP congestion control BPF programs, from Martin KaFai Lau. 14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu. 15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa. 16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen. 17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu. 18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta. 19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits) net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c Documentation: bpf: Add implementation notes documentations to table of contents bpf, docs: Delete misformatted table. selftests/xsk: Fix double free bpftool: Fix error message of strerror libbpf: Fix overrun in netlink attribute iteration selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged" samples/bpf: Fix typo in xdp_router_ipv4 sample bpftool: Remove unused struct event_ring_info bpftool: Remove unused struct btf_attach_point bpf, docs: Add TOC and fix formatting. bpf, docs: Add Clang note about BPF_ALU bpf, docs: Move Clang notes to a separate file bpf, docs: Linux byteswap note bpf, docs: Move legacy packet instructions to a separate file selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION) bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt() bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline ... ==================== Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03Merge tag 'kvmarm-6.1' of ↵Paolo Bonzini1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for v6.1 - Fixes for single-stepping in the presence of an async exception as well as the preservation of PSTATE.SS - Better handling of AArch32 ID registers on AArch64-only systems - Fixes for the dirty-ring API, allowing it to work on architectures with relaxed memory ordering - Advertise the new kvmarm mailing list - Various minor cleanups and spelling fixes
2022-10-03drm/i915/huc: better define HuC status getparam possible return values.Daniele Ceraolo Spurio1-0/+16
The current HuC status getparam return values are a bit confusing in regards to what happens in some scenarios. In particular, most of the error cases cause the ioctl to return an error, but a couple of them, INIT_FAIL and LOAD_FAIL, are not explicitly handled and neither is their expected return value documented; these 2 error cases therefore end up into the catch-all umbrella of the "HuC not loaded" case, with this case therefore including both some error scenarios and the load in progress one. The updates included in this patch change the handling so that all error cases behave the same way, i.e. return an errno code, and so that the HuC load in progress case is unambiguous. The patch also includes a small change to the FW init path to make sure we always transition to an error state if something goes wrong. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Tony Ye <tony.ye@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-14-daniele.ceraolospurio@intel.com
2022-10-03Merge branch 'master' of ↵David S. Miller2-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== 1) Refactor selftests to use an array of structs in xfrm_fill_key(). From Gautam Menghani. 2) Drop an unused argument from xfrm_policy_match. From Hongbin Wang. 3) Support collect metadata mode for xfrm interfaces. From Eyal Birger. 4) Add netlink extack support to xfrm. From Sabrina Dubroca. Please note, there is a merge conflict in: include/net/dst_metadata.h between commit: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") from the net-next tree and commit: 5182a5d48c3d ("net: allow storing xfrm interface metadata in metadata_dst") from the ipsec-next tree. Can be solved as done in linux-next. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30io_uring: introduce fixed buffer support for io_uring_cmdAnuj Gupta1-0/+9
Add IORING_URING_CMD_FIXED flag that is to be used for sending io_uring command with previously registered buffers. User-space passes the buffer index in sqe->buf_index, same as done in read/write variants that uses fixed buffers. Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20220930062749.152261-3-anuj20.g@samsung.com [axboe: shuffle valid flags check before acting on it] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-30Merge branch 'for-6.1/io_uring' into for-6.1/passthroughJens Axboe1-0/+8
* for-6.1/io_uring: (56 commits) io_uring/net: fix notif cqe reordering io_uring/net: don't update msg_name if not provided io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL io_uring/rw: defer fsnotify calls to task context io_uring/net: fix fast_iov assignment in io_setup_async_msg() io_uring/net: fix non-zc send with address io_uring/net: don't skip notifs for failed requests io_uring/rw: don't lose short results on io_setup_async_rw() io_uring/rw: fix unexpected link breakage io_uring/net: fix cleanup double free free_iov init io_uring: fix CQE reordering io_uring/net: fix UAF in io_sendrecv_fail() selftest/net: adjust io_uring sendzc notif handling io_uring: ensure local task_work marks task as running io_uring/net: zerocopy sendmsg io_uring/net: combine fail handlers io_uring/net: rename io_sendzc() io_uring/net: support non-zerocopy sendto io_uring/net: refactor io_setup_async_addr io_uring/net: don't lose partial send_zc on fail ...
2022-09-30Merge branch 'for-6.1/block' into for-6.1/passthroughJens Axboe2-1/+20
* for-6.1/block: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-30counter: Introduce the Count capture componentWilliam Breathitt Gray1-0/+2
Some devices provide a latch function to save historic Count values. This patch standardizes exposure of such functionality as Count capture components. A COUNTER_COMP_CAPTURE macro is provided for driver authors to define a capture component. A new event COUNTER_EVENT_CAPTURE is introduced to represent Count value capture events. Cc: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/c239572ab4208d0d6728136e82a88ad464369a7a.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/3cebaa0b807a225eb277d771504fe6dba7269ffd.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: Introduce the Signal polarity componentWilliam Breathitt Gray1-0/+6
The Signal polarity component represents the active level of a respective Signal. There are two possible states: positive (rising edge) and negative (falling edge); enum counter_signal_polarity represents these states. A convenience macro COUNTER_COMP_POLARITY() is provided for driver authors to declare a Signal polarity component. Cc: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/8f47d6e1db71a11bb1e2666f8e2a6e9d256d4131.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/b6e53438badcb6318997d13dd2fc052f97d808ac.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30net/sched: taprio: allow user input of per-tc max SDUVladimir Oltean1-0/+11
IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30docs: netlink: clarify the historical baggage of Netlink flagsJakub Kicinski1-1/+1
nlmsg_flags are full of historical baggage, inconsistencies and strangeness. Try to document it more thoroughly. Explain the meaning of the ECHO flag (and while at it clarify the comment in the uAPI). Handwave a little about the NEW request flags and how they make sense on the surface but cater to really old paradigm before commands were a thing. I will add more notes on how to make use of ECHO and discouragement for reuse of flags to the kernel-side documentation. Link: https://lore.kernel.org/r/20220927212306.823862-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+2
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29landlock: Fix documentation styleMickaël Salaün1-5/+5
It seems that all code should use double backquotes, which is also used to convert "%" defines. Let's use an homogeneous style and remove all use of simple backquotes (which should only be used for emphasis). Cc: Günther Noack <gnoack3000@gmail.com> Cc: Paul Moore <paul@paul-moore.com> Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20220923154207.3311629-4-mic@digikod.net
2022-09-29perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header fileRavi Bangoria1-1/+1
PERF_MEM_SNOOPX_PEER is defined only in tools uapi header. Although it's used only by perf tool, not defining it in kernel header can create problems in future. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220928095805.596-8-ravi.bangoria@amd.com
2022-09-29perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}Ravi Bangoria1-1/+3
PERF_MEM_LVLNUM_EXTN_MEM which can be used to indicate accesses to extension memory like CXL etc. PERF_MEM_LVL_IO can be used for IO accesses but it can not distinguish between local and remote IO. Introduce new field PERF_MEM_LVLNUM_IO which can be clubbed with PERF_MEM_REMOTE_REMOTE to indicate Remote IO accesses. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220928095805.596-2-ravi.bangoria@amd.com
2022-09-29Merge branch 'v6.0-rc7'Peter Zijlstra4-31/+23
Merge upstream to get RAPTORLAKE_S Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2022-09-29KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config optionMarc Zyngier1-0/+1
In order to differenciate between architectures that require no extra synchronisation when accessing the dirty ring and those who do, add a new capability (KVM_CAP_DIRTY_LOG_RING_ACQ_REL) that identify the latter sort. TSO architectures can obviously advertise both, while relaxed architectures must only advertise the ACQ_REL version. This requires some configuration symbol rejigging, with HAVE_KVM_DIRTY_RING being only indirectly selected by two top-level config symbols: - HAVE_KVM_DIRTY_RING_TSO for strongly ordered architectures (x86) - HAVE_KVM_DIRTY_RING_ACQ_REL for weakly ordered architectures (arm64) Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20220926145120.27974-3-maz@kernel.org
2022-09-29Input: add ABS_PROFILE to uapi and documentationNate Yocom1-0/+1
Define new ABS_PROFILE axis for input devices which need it, e.g. X-Box Adaptive Controller and X-Box Elite 2. Signed-off-by: Nate Yocom <nate@yocom.org> Link: https://lore.kernel.org/r/20220908173930.28940-4-nate@yocom.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-29bpf: Handle bpf_link_info for the parameterized task BPF iterators.Kui-Feng Lee1-0/+4
Add new fields to bpf_link_info that users can query it through bpf_obj_get_info_by_fd(). Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20220926184957.208194-3-kuifeng@fb.com
2022-09-29bpf: Parameterize task iterators.Kui-Feng Lee1-0/+6
Allow creating an iterator that loops through resources of one thread/process. People could only create iterators to loop through all resources of files, vma, and tasks in the system, even though they were interested in only the resources of a specific task or process. Passing the additional parameters, people can now create an iterator to go through all resources or only the resources of a task. Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20220926184957.208194-2-kuifeng@fb.com
2022-09-28firmware/psci: Add debugfs support to ease debuggingDmitry Baryshkov1-0/+14
To ease debugging of PSCI supported features, add debugfs file called 'psci' describing PSCI and SMC CC versions, enabled features and options. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220926110758.666922-1-dmitry.baryshkov@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-28net: tls: Add ARIA-GCM algorithmTaehee Yoo1-0/+30
RFC 6209 describes ARIA for TLS 1.2. ARIA-128-GCM and ARIA-256-GCM are defined in RFC 6209. This patch would offer performance increment and an opportunity for hardware offload. Benchmark results: iperf-ssl are used. CPU: intel i3-12100. TLS(openssl-3.0-dev) [ 3] 0.0- 1.0 sec 185 MBytes 1.55 Gbits/sec [ 3] 1.0- 2.0 sec 186 MBytes 1.56 Gbits/sec [ 3] 2.0- 3.0 sec 186 MBytes 1.56 Gbits/sec [ 3] 3.0- 4.0 sec 186 MBytes 1.56 Gbits/sec [ 3] 4.0- 5.0 sec 186 MBytes 1.56 Gbits/sec [ 3] 0.0- 5.0 sec 927 MBytes 1.56 Gbits/sec kTLS(aria-generic) [ 3] 0.0- 1.0 sec 198 MBytes 1.66 Gbits/sec [ 3] 1.0- 2.0 sec 194 MBytes 1.62 Gbits/sec [ 3] 2.0- 3.0 sec 194 MBytes 1.63 Gbits/sec [ 3] 3.0- 4.0 sec 194 MBytes 1.63 Gbits/sec [ 3] 4.0- 5.0 sec 194 MBytes 1.62 Gbits/sec [ 3] 0.0- 5.0 sec 974 MBytes 1.63 Gbits/sec kTLS(aria-avx wirh GFNI) [ 3] 0.0- 1.0 sec 632 MBytes 5.30 Gbits/sec [ 3] 1.0- 2.0 sec 657 MBytes 5.51 Gbits/sec [ 3] 2.0- 3.0 sec 657 MBytes 5.51 Gbits/sec [ 3] 3.0- 4.0 sec 656 MBytes 5.50 Gbits/sec [ 3] 4.0- 5.0 sec 656 MBytes 5.50 Gbits/sec [ 3] 0.0- 5.0 sec 3.18 GBytes 5.47 Gbits/sec Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/20220925150033.24615-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27headers: Remove some left-over license textChristophe JAILLET5-34/+1
Remove some left-over from commit e2be04c7f995 ("License cleanup: add SPDX license identifier to uapi header files with a license") When the SPDX-License-Identifier tag has been added, the corresponding license text has not been removed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/88410cddd31197ea26840d7dd71612bece8c6acf.1663871981.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27RDMA/rxe: Remove redundant num_sge fieldsBob Pearson1-2/+2
In include/uapi/rdma/rdma_user_rxe.h there are redundant copies of num_sge in the rxe_send_wr, rxe_recv_wqe, and rxe_dma_info. Only the ones in rxe_dma_info are actually used by the rxe kernel driver. The userspace would set these values, but the kernel never read them. This change has no affect on the current ABI and new or old versions of rdma-core operate correctly with new or old versions of the kernel rxe driver. Link: https://lore.kernel.org/r/20220913222716.18335-1-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-09-27RDMA/mlx5: Add support for dmabuf to devx umemJason Gunthorpe1-0/+1
This is modeled after the similar EFA enablement in commit 66f4817b5712 ("RDMA/efa: Add support for dmabuf memory regions"). Like EFA there is no support for revocation so we simply call the ib_umem_dmabuf_get_pinned() to obtain a umem instead of the normal ib_umem_get(). Everything else stays the same. Link: https://lore.kernel.org/r/3-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-09-27ALSA: Remove some left-over license text in include/uapi/sound/Christophe JAILLET14-214/+2
There is already a SPDX-License-Identifier tag, so the corresponding license text can be removed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/203c1db92c470925f31e361f6e7d180812501f2e.1664112023.git.christophe.jaillet@wanadoo.fr Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-09-27bpf: Return value in kprobe get_func_ip only for entry addressJiri Olsa1-0/+1
Changing return value of kprobe's version of bpf_get_func_ip to return zero if the attach address is not on the function's entry point. For kprobes attached in the middle of the function we can't easily get to the function address especially now with the CONFIG_X86_KERNEL_IBT support. If user cares about current IP for kprobes attached within the function body, they can get it with PT_REGS_IP(ctx). Suggested-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-26btrfs: introduce BTRFS_QGROUP_STATUS_FLAGS_MASK for later expansionQu Wenruo1-0/+4
Currently we only have 3 qgroup flags: - BTRFS_QGROUP_STATUS_FLAG_ON - BTRFS_QGROUP_STATUS_FLAG_RESCAN - BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT These flags match the on-disk flags used in btrfs_qgroup_status. But we're going to introduce extra runtime flags which will not reach disks. So here we introduce a new mask, BTRFS_QGROUP_STATUS_FLAGS_MASK, to make sure only those flags can reach disks. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26btrfs: separate BLOCK_GROUP_TREE compat RO flag from EXTENT_TREE_V2Qu Wenruo1-0/+6
The problem of long mount time caused by block group item search is already known for some time, and the solution of block group tree has been proposed. There is really no need to bound this feature into extent tree v2, just introduce compat RO flag, BLOCK_GROUP_TREE, to correctly solve the problem. All the code handling block group root is already in the upstream kernel, thus this patch really only needs to introduce the new compat RO flag. This patch introduces one extra artificial limitation on block group tree feature, that free space cache v2 and no-holes feature must be enabled to use this new compat RO feature. This artificial requirement is mostly to reduce the test combinations, and can be a guideline for future features, to mostly rely on the latest default features. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-25scsi: scsi_transport_fc: Adjust struct fc_nl_event flex array usageKees Cook1-2/+5
In order to help the compiler reason about the destination buffer in struct fc_nl_event, add a flexible array member for this purpose. However, since the header is UAPI, it must not change size or layout, so a union is used. The allocation size calculations are also corrected (it was potentially allocating an extra 8 bytes), and the padding is zeroed to avoid leaking kernel heap memory contents. Detected at run-time by the recently added memcpy() bounds checking: memcpy: detected field-spanning write (size 8) of single field "&event->event_data" at drivers/scsi/scsi_transport_fc.c:581 (size 4) Link: https://lore.kernel.org/linux-next/42404B5E-198B-4FD3-94D6-5E16CF579EF3@linux.ibm.com/ Link: https://lore.kernel.org/r/20220921205155.1451649-1-keescook@chromium.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reported-by: Sachin Sant <sachinp@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25Merge tag 'iio-for-6.1b' of ↵Greg Kroah-Hartman1-1/+6
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: Second set of IIO new device support, features and cleanup for the 6.1 cycle. Normal mixed bag of new device support with continuing trend that most new devices are supported by extending existing drivers - a positive sign perhaps that device manufacturers have somewhat stabilized their interfaces across product generations. The BNO055 driver was however a substantial addition including several additions to the IIO core. There are a number of significant patch sets under review, so if the 6.0 cycle runs long I may send a 3rd pull request. New device support * adi,adxl313 - Support for the ADXL312 and ADXL314 accelerometers. * bosch,bmp280 - Support for the BMP380 family of pressures sensors. Included considerable refactoring and modernization of the bmp280 driver. * bosch,bno055 - New driver for this i2c/serial attached complex IMU. * lltc,ltc2497 - Support for the LTC2499 16 channel, 24bit ADC. * st,pressure - Support for the LPS22DF pressure sensor * st,lsm6dsx - Support for the LSM6DSTX (Mainly adding the ID and WAI) Features * core - to support the bosch,bno055 requirements - Support for linear acceleration channel type (effect of gravity removed) - Pitch, yaw and roll modifiers for angle channels. - Standard serialnumber attribute documentation. - Binary attributes - to allow for calibration save and restore. * adi,ad7923 - Support extended range (wider supported input voltage range). * bosch,bmp280 - Add filter controls for some supported parts. * microchip,mcp3911 - Buffered capture support for this ADC. - Data ready interrupt support, including hiz control for line. - Oversampling ratio support. * st,stm32-adc - Support ID registers on parts where they are present, providing discoverability of some features. Fixes - late breaking fixes that I judged could wait for the merge window. * adi,ad5593r - Add a missing STOP condition between address write and data read. - Check for related i2c functionality. * adi,ad7923 - Fix shift reporting for some variants supported by the driver. * infinion,dps310 - Work around a hardware issue where a chip can hang by adding a timeout and reset path. Cleanups * Continuing work to switch to new pm macros. * MAINTAINERS - Drop duplication of wild card covered entry in ADI block and add missing entries to cover ltc294x binding files. * bosch,bma400 - Fix trivial smatch warning. * bosch,bmp280 - Fix broken links to datasheets * lltc,ltc2497 - Fix missing entry for ltc2499 * mexelis,mlx90614 - Switch to get_avail() callback for _available attributes. * microchip,mcp3911 - Move to devm_ resource management for all elements of probe() * tag 'iio-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (57 commits) iio: adc: mcp3911: add support for oversampling ratio dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry iio: adc: mcp3911: add support for interrupts iio: adc: mcp3911: add support for buffers iio: adc: mcp3911: use resource-managed version of iio_device_register iio: accel: bma400: Fix smatch warning based on use of unintialized value. iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS() iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() docs: iio: add documentation for BNO055 driver iio: imu: add BNO055 I2C driver iio: imu: add BNO055 serdev driver dt-bindings: iio/imu: Add Bosch BNO055 iio: document "serialnumber" sysfs attribute iio: document bno055 private sysfs attributes iio: imu: add Bosch Sensortec BNO055 core driver iio: add support for binary attributes ...
2022-09-24media: cec: add support for Absolute Volume ControlHans Verkuil2-0/+16
Add support for this new CEC message. This was added in HDMI 2.1a. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 10:02:46 +0300