| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
RFC 4303 in section 3.3.3 suggests to disable anti-replay for manually
distributed ICVs in which case the sender does not need to monitor or
reset the counter. However, the sender still increments the counter and
when it reaches the maximum value, the counter rolls over back to zero.
This patch introduces new extra_flag XFRM_SA_XFLAG_OSEQ_MAY_WRAP which
allows sequence number to cycle in outbound packets if set. This flag is
used only in legacy and bmp code, because esn should not be negotiated
if anti-replay is disabled (see note in 3.3.3 section).
Signed-off-by: Petr Vaněk <pv@excello.cz>
Acked-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
s/xfrm_state_offload/xfrm_user_offload/
Fixes: d77e38e612a ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch adds the xfrm interface id as a lookup key
for xfrm states and policies. With this we can assign
states and policies to virtual xfrm interfaces.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: Benedict Wong <benedictwong@google.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
|
|
We already support setting an output mark at the xfrm_state,
unfortunately this does not support the input direction and
masking the marks that will be applied to the skb. This change
adds support applying a masked value in both directions.
The existing XFRMA_OUTPUT_MARK number is reused for this purpose
and as it is now bi-directional, it is renamed to XFRMA_SET_MARK.
An additional XFRMA_SET_MARK_MASK attribute is added for setting the
mask. If the attribute mask not provided, it is set to 0xffffffff,
keeping the XFRMA_OUTPUT_MARK existing 'full mask' semantics.
Co-developed-by: Tobias Brunner <tobias@strongswan.org>
Co-developed-by: Eyal Birger <eyal.birger@gmail.com>
Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
|
|
license
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On systems that use mark-based routing it may be necessary for
routing lookups to use marks in order for packets to be routed
correctly. An example of such a system is Android, which uses
socket marks to route packets via different networks.
Currently, routing lookups in tunnel mode always use a mark of
zero, making routing incorrect on such systems.
This patch adds a new output_mark element to the xfrm state and
a corresponding XFRMA_OUTPUT_MARK netlink attribute. The output
mark differs from the existing xfrm mark in two ways:
1. The xfrm mark is used to match xfrm policies and states, while
the xfrm output mark is used to set the mark (and influence
the routing) of the packets emitted by those states.
2. The existing mark is constrained to be a subset of the bits of
the originating socket or transformed packet, but the output
mark is arbitrary and depends only on the state.
The use of a separate mark provides additional flexibility. For
example:
- A packet subject to two transforms (e.g., transport mode inside
tunnel mode) can have two different output marks applied to it,
one for the transport mode SA and one for the tunnel mode SA.
- On a system where socket marks determine routing, the packets
emitted by an IPsec tunnel can be routed based on a mark that
is determined by the tunnel, not by the marks of the
unencrypted packets.
- Support for setting the output marks can be introduced without
breaking any existing setups that employ both mark-based
routing and xfrm tunnel mode. Simply changing the code to use
the xfrm mark for routing output packets could xfrm mark could
change behaviour in a way that breaks these setups.
If the output mark is unspecified or set to zero, the mark is not
set or changed.
Tested: make allyesconfig; make -j64
Tested: https://android-review.googlesource.com/452776
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.
Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Reported-by: Paul Wouters <paul@nohats.ca>
Signed-off-by: Richard Guy Briggs <rgb@tricolour.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and
get rid of the typecasting.
Modifying the uapi header is okay, the union has still the same size.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable to specify local and remote prefix length thresholds for the
policy hash table via a netlink XFRM_MSG_NEWSPDINFO message.
prefix length thresholds are specified by XFRMA_SPD_IPV4_HTHRESH and
XFRMA_SPD_IPV6_HTHRESH optional attributes (struct xfrmu_spdhthresh).
example:
struct xfrmu_spdhthresh thresh4 = {
.lbits = 0;
.rbits = 24;
};
struct xfrmu_spdhthresh thresh6 = {
.lbits = 0;
.rbits = 56;
};
struct nlmsghdr *hdr;
struct nl_msg *msg;
msg = nlmsg_alloc();
hdr = nlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, XFRMA_SPD_IPV4_HTHRESH, sizeof(__u32), NLM_F_REQUEST);
nla_put(msg, XFRMA_SPD_IPV4_HTHRESH, sizeof(thresh4), &thresh4);
nla_put(msg, XFRMA_SPD_IPV6_HTHRESH, sizeof(thresh6), &thresh6);
nla_send_auto(sk, msg);
The numbers are the policy selector minimum prefix lengths to put a
policy in the hash table.
- lbits is the local threshold (source address for out policies,
destination address for in and fwd policies).
- rbits is the remote threshold (destination address for out
policies, source address for in and fwd policies).
The default values are:
XFRMA_SPD_IPV4_HTHRESH: 32 32
XFRMA_SPD_IPV6_HTHRESH: 128 128
Dynamic re-building of the SPD is performed when the thresholds values
are changed.
The current thresholds can be read via a XFRM_MSG_GETSPDINFO request:
the kernel replies to XFRM_MSG_GETSPDINFO requests by an
XFRM_MSG_NEWSPDINFO message, with both attributes
XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH.
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
iproute2 already defines a structure with that name, let's use another one to
avoid any conflict.
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The goal of this patch is to allow userland to dump only a part of SA by
specifying a filter during the dump.
The kernel is in charge to filter SA, this avoids to generate useless netlink
traffic (it save also some cpu cycles). This is particularly useful when there
is a big number of SA set on the system.
Note that I removed the union in struct xfrm_state_walk to fix a problem on arm.
struct netlink_callback->args is defined as a array of 6 long and the first long
is used in xfrm code to flag the cb as initialized. Hence, we must have:
sizeof(struct xfrm_state_walk) <= sizeof(long) * 5.
With the union, it was false on arm (sizeof(struct xfrm_state_walk) was
sizeof(long) * 7), due to the padding.
In fact, whatever the arch is, this union seems useless, there will be always
padding after it. Removing it will not increase the size of this struct (and
reduce it on arm).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
By default, DSCP is copying during encapsulation.
Copying the DSCP in IPsec tunneling may be a bit dangerous because packets with
different DSCP may get reordered relative to each other in the network and then
dropped by the remote IPsec GW if the reordering becomes too big compared to the
replay window.
It is possible to avoid this copy with netfilter rules, but it's very convenient
to be able to configure it for each SA directly.
This patch adds a toogle for this purpose. By default, it's not set to maintain
backward compatibility.
Field flags in struct xfrm_usersa_info is full, hence I add a new attribute.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
|
