summaryrefslogtreecommitdiff
path: root/include/soc
AgeCommit message (Collapse)AuthorFilesLines
2022-05-26Merge tag 'arm-drivers-5.19' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "There are minor updates to SoC specific drivers for chips by Rockchip, Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy driver changes include: - Several conversions of DT bindings to yaml format. - Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs. - Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core), and support for more chips in the RPMh power domains and the soc-id. - NXP has a new driver for the HDMI blk-ctrl on i.MX8MP. - Apple M1 gains support for the on-chip NVMe controller, making it possible to finally use the internal disks. This also includes SoC drivers for their RTKit IPC and for the SART DMA address filter. For other subsystems that merge their drivers through the SoC tree, we have - Firmware drivers for the ARM firmware stack including TEE, OP-TEE, SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE now has a cache for firmware argument structures as an optimization, and SCMI now supports the 3.1 version of the specification. - Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers - Memory controller updates for Tegra, and a few updates for other platforms" * tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits) memory: tegra: Add MC error logging on Tegra186 onward memory: tegra: Add memory controller channels support memory: tegra: Add APE memory clients for Tegra234 memory: tegra: Add Tegra234 support nvme-apple: fix sparse endianess warnings soc/tegra: pmc: Document core domain fields soc: qcom: pdr: use static for servreg_* variables soc: imx: fix semicolon.cocci warnings soc: renesas: R-Car V3U is R-Car Gen4 soc: imx: add i.MX8MP HDMI blk-ctrl soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl soc: imx: add i.MX8MP HSIO blk-ctrl soc: imx: imx8m-blk-ctrl: set power device name soc: qcom: llcc: Add sc8180x and sc8280xp configurations dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles soc/tegra: pmc: Select REGMAP dt-bindings: reset: st,sti-powerdown: Convert to yaml dt-bindings: reset: st,sti-picophyreset: Convert to yaml dt-bindings: reset: socfpga: Convert to yaml dt-bindings: reset: snps,axs10x-reset: Convert to yaml ...
2022-05-25Merge tag 'net-next-5.19' of ↵Linus Torvalds2-14/+30
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core ---- - Support TCPv6 segmentation offload with super-segments larger than 64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP). - Generalize skb freeing deferral to per-cpu lists, instead of per-socket lists. - Add a netdev statistic for packets dropped due to L2 address mismatch (rx_otherhost_dropped). - Continue work annotating skb drop reasons. - Accept alternative netdev names (ALT_IFNAME) in more netlink requests. - Add VLAN support for AF_PACKET SOCK_RAW GSO. - Allow receiving skb mark from the socket as a cmsg. - Enable memcg accounting for veth queues, sysctl tables and IPv6. BPF --- - Add libbpf support for User Statically-Defined Tracing (USDTs). - Speed up symbol resolution for kprobes multi-link attachments. - Support storing typed pointers to referenced and unreferenced objects in BPF maps. - Add support for BPF link iterator. - Introduce access to remote CPU map elements in BPF per-cpu map. - Allow middle-of-the-road settings for the kernel.unprivileged_bpf_disabled sysctl. - Implement basic types of dynamic pointers e.g. to allow for dynamically sized ringbuf reservations without extra memory copies. Protocols --------- - Retire port only listening_hash table, add a second bind table hashed by port and address. Avoid linear list walk when binding to very popular ports (e.g. 443). - Add bridge FDB bulk flush filtering support allowing user space to remove all FDB entries matching a condition. - Introduce accept_unsolicited_na sysctl for IPv6 to implement router-side changes for RFC9131. - Support for MPTCP path manager in user space. - Add MPTCP support for fallback to regular TCP for connections that have never connected additional subflows or transmitted out-of-sequence data (partial support for RFC8684 fallback). - Avoid races in MPTCP-level window tracking, stabilize and improve throughput. - Support lockless operation of GRE tunnels with seq numbers enabled. - WiFi support for host based BSS color collision detection. - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets. - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2). - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile). - Allow matching on the number of VLAN tags via tc-flower. - Add tracepoint for tcp_set_ca_state(). Driver API ---------- - Improve error reporting from classifier and action offload. - Add support for listing line cards in switches (devlink). - Add helpers for reporting page pool statistics with ethtool -S. - Add support for reading clock cycles when using PTP virtual clocks, instead of having the driver convert to time before reporting. This makes it possible to report time from different vclocks. - Support configuring low-latency Tx descriptor push via ethtool. - Separate Clause 22 and Clause 45 MDIO accesses more explicitly. New hardware / drivers ---------------------- - Ethernet: - Marvell's Octeon NIC PCI Endpoint support (octeon_ep) - Sunplus SP7021 SoC (sp7021_emac) - Add support for Renesas RZ/V2M (in ravb) - Add support for MediaTek mt7986 switches (in mtk_eth_soc) - Ethernet PHYs: - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting) - TI DP83TD510 PHY - Microchip LAN8742/LAN88xx PHYs - WiFi: - Driver for pureLiFi X, XL, XC devices (plfxlc) - Driver for Silicon Labs devices (wfx) - Support for WCN6750 (in ath11k) - Support Realtek 8852ce devices (in rtw89) - Mobile: - MediaTek T700 modems (Intel 5G 5000 M.2 cards) - CAN: - ctucanfd: add support for CTU CAN FD open-source IP core from Czech Technical University in Prague Drivers ------- - Delete a number of old drivers still using virt_to_bus(). - Ethernet NICs: - intel: support TSO on tunnels MPLS - broadcom: support multi-buffer XDP - nfp: support VF rate limiting - sfc: use hardware tx timestamps for more than PTP - mlx5: multi-port eswitch support - hyper-v: add support for XDP_REDIRECT - atlantic: XDP support (including multi-buffer) - macb: improve real-time perf by deferring Tx processing to NAPI - High-speed Ethernet switches: - mlxsw: implement basic line card information querying - prestera: add support for traffic policing on ingress and egress - Embedded Ethernet switches: - lan966x: add support for packet DMA (FDMA) - lan966x: add support for PTP programmable pins - ti: cpsw_new: enable bc/mc storm prevention - Qualcomm 802.11ax WiFi (ath11k): - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - enable keep-alive during WoWLAN suspend - implement remain-on-channel support - MediaTek WiFi (mt76): - support Wireless Ethernet Dispatch offloading packet movement between the Ethernet switch and WiFi interfaces - non-standard VHT MCS10-11 support - mt7921 AP mode support - mt7921 IPv6 NS offload support - Ethernet PHYs: - micrel: ksz9031/ksz9131: cabletest support - lan87xx: SQI support for T1 PHYs - lan937x: add interrupt support for link detection" * tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits) ptp: ocp: Add firmware header checks ptp: ocp: fix PPS source selector debugfs reporting ptp: ocp: add .init function for sma_op vector ptp: ocp: vectorize the sma accessor functions ptp: ocp: constify selectors ptp: ocp: parameterize input/output sma selectors ptp: ocp: revise firmware display ptp: ocp: add Celestica timecard PCI ids ptp: ocp: Remove #ifdefs around PCI IDs ptp: ocp: 32-bit fixups for pci start address Revert "net/smc: fix listen processing for SMC-Rv2" ath6kl: Use cc-disable-warning to disable -Wdangling-pointer selftests/bpf: Dynptr tests bpf: Add dynptr data slices bpf: Add bpf_dynptr_read and bpf_dynptr_write bpf: Dynptr support for ring buffers bpf: Add bpf_dynptr_from_mem for local dynptrs bpf: Add verifier support for dynptrs bpf: Suppress 'passing zero to PTR_ERR' warning bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack ...
2022-05-25Merge tag 'pm-5.19-rc1' of ↵Linus Torvalds1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add support for 'artificial' Energy Models in which power numbers for different entities may be in different scales, add support for some new hardware, fix bugs and clean up code in multiple places. Specifics: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add CPU-based scaling support to passive devfreq governor (Saravana Kannan, Chanwoo Choi). - Update the rk3399_dmc devfreq driver (Brian Norris). - Export dev_pm_ops instead of suspend() and resume() in the IIO chemical scd30 driver (Jonathan Cameron). - Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and PM-runtime counterparts (Jonathan Cameron). - Move symbol exports in the IIO chemical scd30 driver into the IIO_SCD30 namespace (Jonathan Cameron). - Avoid device PM-runtime usage count underflows (Rafael Wysocki). - Allow dynamic debug to control printing of PM messages (David Cohen). - Fix some kernel-doc comments in hibernation code (Yang Li, Haowen Bai). - Preserve ACPI-table override during hibernation (Amadeusz Sławiński). - Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson). - Make Intel RAPL power capping driver support the RaptorLake and AlderLake N processors (Zhang Rui, Sumeet Pawnikar). - Remove redundant store to value after multiply in the RAPL power capping driver (Colin Ian King). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). - Fix cpufreq governor clean up code to avoid using kfree() directly to free kobject-based items (Kevin Hao). - Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy). - Make intel_pstate notify frequency invariance code when no_turbo is turned on and off (Chen Yu). - Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas Pandruvada). - Make cpufreq avoid unnecessary frequency updates due to mismatch between hardware and the frequency table (Viresh Kumar). - Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify code (Viresh Kumar). - Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the calling convention for some driver callbacks consistent (Rafael Wysocki). - Avoid accessing half-initialized cpufreq policies from the show() and store() sysfs functions (Schspa Shi). - Rearrange cpufreq_offline() to make the calling convention for some driver callbacks consistent (Schspa Shi). - Update CPPC handling in cpufreq (Pierre Gondois). - Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski). - Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf Hansson). - Improve the way genpd deals with its governors (Ulf Hansson). - Update the turbostat utility to version 2022.04.16 (Len Brown, Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)" * tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits) PM: domains: Trust domain-idle-states from DT to be correct by genpd PM: domains: Measure power-on/off latencies in genpd based on a governor PM: domains: Allocate governor data dynamically based on a genpd governor PM: domains: Clean up some code in pm_genpd_init() and genpd_remove() PM: domains: Fix initialization of genpd's next_wakeup PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd PM: domains: Measure suspend/resume latencies in genpd based on governor PM: domains: Move the next_wakeup variable into the struct gpd_timing_data PM: domains: Allocate gpd_timing_data dynamically based on governor PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain() PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd PM: domains: Drop redundant code for genpd always-on governor PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor powercap: intel_rapl: remove redundant store to value after multiply cpufreq: CPPC: Enable dvfs_possible_from_any_cpu cpufreq: CPPC: Enable fast_switch ACPI: CPPC: Assume no transition latency if no PCCT ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported ACPI: CPPC: Check _OSC for flexible address space ...
2022-05-23crypto: caam - add in-kernel interface for blob generatorAhmad Fatoum1-0/+103
The NXP Cryptographic Acceleration and Assurance Module (CAAM) can be used to protect user-defined data across system reboot: - When the system is fused and boots into secure state, the master key is a unique never-disclosed device-specific key - random key is encrypted by key derived from master key - data is encrypted using the random key - encrypted data and its encrypted random key are stored alongside - This blob can now be safely stored in non-volatile memory On next power-on: - blob is loaded into CAAM - CAAM writes decrypted data either into memory or key register Add functions to realize encrypting and decrypting into memory alongside the CAAM driver. They will be used in a later commit as a source for the trusted key seal/unseal mechanism. Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-05-23net: dsa: felix: tag_8021q preparation for multiple CPU portsVladimir Oltean1-1/+1
Update the VCAP filters to support multiple tag_8021q CPU ports. TX works using a filter for VLAN ID on the ingress of the CPU port, with a redirect and a VLAN pop action. This can be updated trivially by amending the ingress port mask of this rule to match on all tag_8021q CPU ports. RX works using a filter for ingress port on the egress of the CPU port, with a VLAN push action. Here we need to replicate these filters for each tag_8021q CPU port, and let them all have the same action. This means that the OCELOT_VCAP_ES0_TAG_8021Q_RXVLAN() cookie needs to encode a unique value for every {user port, CPU port} pair it's given. Do this by encoding the CPU port in the upper 16 bits of the cookie, and the user port in the lower 16 bits. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-23net: mscc: ocelot: switch from {,un}set to {,un}assign for tag_8021q CPU portsVladimir Oltean1-3/+7
There is a desire for the felix driver to gain support for multiple tag_8021q CPU ports, but the current model prevents it. This is because ocelot_apply_bridge_fwd_mask() only takes into consideration whether a port is a tag_8021q CPU port, but not whose CPU port it is. We need a model where we can have a direct affinity between an ocelot port and a tag_8021q CPU port. This serves as the basis for multiple CPU ports. Declare a "dsa_8021q_cpu" backpointer in struct ocelot_port which encodes that affinity. Repurpose the "ocelot_set_dsa_8021q_cpu" API to "ocelot_assign_dsa_8021q_cpu" to express the change of paradigm. Note that this change makes the first practical use of the new ocelot_port->index field in ocelot_port_unassign_dsa_8021q_cpu(), where we need to remove the old tag_8021q CPU port from the reserved VLAN range. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-23net: dsa: felix: update bridge fwd mask from ocelot lib when changing ↵Vladimir Oltean1-1/+0
tag_8021q CPU Add more logic to ocelot_port_{,un}set_dsa_8021q_cpu() from the ocelot switch lib by encapsulating the ocelot_apply_bridge_fwd_mask() call that felix used to have. This is necessary because the CPU port change procedure will also need to do this, and it's good to reduce code duplication by having an entry point in the ocelot switch lib that does all that is needed. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-18Merge tag 'devfreq-next-for-5.19' of ↵Rafael J. Wysocki1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq changes for 5.19-rc1 from Chanwoo Choi: "1. Update devfreq core - Add cpu based scaling support to passive governor. Some device like cache might require the dynamic frequency scaling. But, it has very tightly to cpu frequency. So that use passive governor to scale the frequency according to current cpu frequency. To decide the frequency of the device, the governor does one of the following: : Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. : Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. 2. Update devfreq drivers - Update rk3399_dmc.c as following: : Convert dt-binding document to YAML and deprecate unused properties. : Use Hz units for the device-tree properties of rk3399_dmc. : rk3399_dmc is able to set the idle time before changing the dmc clock. Specify idle time parameters by using nano-second unit on dt bidning. : Add new disable-freq properties to optimize the power-saving feature of rk3399_dmc. : Disable devfreq-event device on remove() to fix unbalanced enable-disable count. : Use devm_pm_opp_of_add_table() : Block PMU (Power-Management Unit) transitions when scaling frequency by ARM Trust Firmware in order to fix the conflict between PMU and DMC (Dynamic Memory Controller)." * tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: passive: Keep cpufreq_policy for possible cpus PM / devfreq: passive: Reduce duplicate code when passive_devfreq case PM / devfreq: Add cpu based scaling support to passive governor PM / devfreq: Export devfreq_get_freq_range symbol within devfreq PM / devfreq: rk3399_dmc: Block PMU during transitions soc: rockchip: power-domain: Manage resource conflicts with firmware PM / devfreq: rk3399_dmc: Avoid static (reused) profile PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table() PM / devfreq: rk3399_dmc: Disable edev on remove() PM / devfreq: rk3399_dmc: Support new *-ns properties PM / devfreq: rk3399_dmc: Support new disable-freq properties PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD PM / devfreq: rk3399_dmc: Drop excess timing properties PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds dt-bindings: devfreq: rk3399_dmc: Fix Hz units dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties dt-bindings: devfreq: rk3399_dmc: Convert to YAML
2022-05-13net: mscc: ocelot: move ocelot_port_private :: chip_port to ocelot_port :: indexVladimir Oltean1-0/+2
Currently the ocelot switch lib is unaware of the index of a struct ocelot_port, since that is kept in the encapsulating structures of outer drivers (struct dsa_port :: index, struct ocelot_port_private :: chip_port). With the upcoming increase in complexity associated with assigning DSA tag_8021q CPU ports to certain user ports, it becomes necessary for the switch lib to be able to retrieve the index of a certain ocelot_port. Therefore, introduce a new u8 to ocelot_port (same size as the chip_port used by the ocelot switchdev driver) and rework the existing code to populate and use it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13net: mscc: ocelot: minimize holes in struct ocelot_portVladimir Oltean1-9/+11
Reorder members of struct ocelot_port to eliminate holes and reduce structure size. Pahole says: Before: struct ocelot_port { struct ocelot * ocelot; /* 0 8 */ struct regmap * target; /* 8 8 */ bool vlan_aware; /* 16 1 */ /* XXX 7 bytes hole, try to pack */ const struct ocelot_bridge_vlan * pvid_vlan; /* 24 8 */ unsigned int ptp_skbs_in_flight; /* 32 4 */ u8 ptp_cmd; /* 36 1 */ /* XXX 3 bytes hole, try to pack */ struct sk_buff_head tx_skbs; /* 40 96 */ /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */ u8 ts_id; /* 136 1 */ /* XXX 3 bytes hole, try to pack */ phy_interface_t phy_mode; /* 140 4 */ bool is_dsa_8021q_cpu; /* 144 1 */ bool learn_ena; /* 145 1 */ /* XXX 6 bytes hole, try to pack */ struct net_device * bond; /* 152 8 */ bool lag_tx_active; /* 160 1 */ /* XXX 1 byte hole, try to pack */ u16 mrp_ring_id; /* 162 2 */ /* XXX 4 bytes hole, try to pack */ struct net_device * bridge; /* 168 8 */ int bridge_num; /* 176 4 */ u8 stp_state; /* 180 1 */ /* XXX 3 bytes hole, try to pack */ int speed; /* 184 4 */ /* size: 192, cachelines: 3, members: 18 */ /* sum members: 161, holes: 7, sum holes: 27 */ /* padding: 4 */ }; After: struct ocelot_port { struct ocelot * ocelot; /* 0 8 */ struct regmap * target; /* 8 8 */ struct net_device * bond; /* 16 8 */ struct net_device * bridge; /* 24 8 */ const struct ocelot_bridge_vlan * pvid_vlan; /* 32 8 */ phy_interface_t phy_mode; /* 40 4 */ unsigned int ptp_skbs_in_flight; /* 44 4 */ struct sk_buff_head tx_skbs; /* 48 96 */ /* --- cacheline 2 boundary (128 bytes) was 16 bytes ago --- */ u16 mrp_ring_id; /* 144 2 */ u8 ptp_cmd; /* 146 1 */ u8 ts_id; /* 147 1 */ u8 stp_state; /* 148 1 */ bool vlan_aware; /* 149 1 */ bool is_dsa_8021q_cpu; /* 150 1 */ bool learn_ena; /* 151 1 */ bool lag_tx_active; /* 152 1 */ /* XXX 3 bytes hole, try to pack */ int bridge_num; /* 156 4 */ int speed; /* 160 4 */ /* size: 168, cachelines: 3, members: 18 */ /* sum members: 161, holes: 1, sum holes: 3 */ /* padding: 4 */ /* last cacheline: 40 bytes */ }; Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13net: mscc: ocelot: delete ocelot_port :: xmit_templateVladimir Oltean1-1/+0
This is no longer used since commit 7c4bb540e917 ("net: dsa: tag_ocelot: create separate tagger for Seville"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09memory: tegra: Add MC error logging on Tegra186 onwardAshish Mhetre1-1/+4
Add support for logging memory controller errors on Tegra186, Tegra194 and Tegra234. On these SoCs, interrupts can occur on multiple channels. Add support required to read the status of interrupts across multiple channels, log and clear them. Also add new interrupts supported on these SoCs. Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Ashish Mhetre <amhetre@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220506132312.3910637-5-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-05-09memory: tegra: Add memory controller channels supportAshish Mhetre1-0/+3
From Tegra186 onwards, the memory controller supports multiple channels. Add support for mapping the address spaces of these channels and specify the number of channels supported by Tegra186, Tegra194 and Tegra234. In case of old bindings, channels won't be present. If channels are not present then print a warning and continue so that backward compatibility will be preserved in driver. During error interrupts from memory controller, appropriate registers from these channels need to be accessed for logging error info. Signed-off-by: Ashish Mhetre <amhetre@nvidia.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220506132312.3910637-4-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-05-08soc: rockchip: power-domain: Manage resource conflicts with firmwareBrian Norris1-0/+25
On RK3399 platforms, power domains are managed mostly by the kernel (drivers/soc/rockchip/pm_domains.c), but there are a few exceptions where ARM Trusted Firmware has to be involved: (1) system suspend/resume (2) DRAM DVFS (a.k.a., "ddrfreq") Exception (1) does not cause much conflict, since the kernel has quiesced itself by the time we make the relevant PSCI call. Exception (2) can cause conflict, because of two actions: (a) ARM Trusted Firmware needs to read/modify/write the PMU_BUS_IDLE_REQ register to idle the memory controller domain; the kernel driver also has to touch this register for other domains. (b) ARM Trusted Firmware needs to manage the clocks associated with these domains. To elaborate on (b): idling a power domain has always required ungating an array of clocks; see this old explanation from Rockchip: https://lore.kernel.org/linux-arm-kernel/54503C19.9060607@rock-chips.com/ Historically, ARM Trusted Firmware has avoided this issue by using a special PMU_CRU_GATEDIS_CON0 register -- this register ungates all the necessary clocks -- when idling the memory controller. Unfortunately, we've found that this register is not 100% sufficient; it does not turn the relevant PLLs on [0]. So it's possible to trigger issues with something like the following: 1. enable a power domain (e.g., RK3399_PD_VDU) -- kernel will temporarily enable relevant clocks/PLLs, then turn them back off 2. a PLL (e.g., PLL_NPLL) is part of the clock tree for RK3399_PD_VDU's clocks but otherwise unused; NPLL is disabled 3. perform a ddrfreq transition (rk3399_dmcfreq_target() -> ... drivers/clk/rockchip/clk-ddr.c / ROCKCHIP_SIP_DRAM_FREQ) 4. ARM Trusted Firmware unagates VDU clocks (via PMU_CRU_GATEDIS_CON0) 5. ARM Trusted firmware idles the memory controller domain 6. Step 5 waits on the VDU domain/clocks, but NPLL is still off i.e., we hang the system. So for (b), we need to at a minimum manage the relevant PLLs on behalf of firmware. It's easier to simply manage the whole clock tree, in a similar way we do in rockchip_pd_power(). For (a), we need to provide mutual exclusion betwen rockchip_pd_power() and firmware. To resolve that, we simply grab the PMU mutex and release it when ddrfreq is done. The Chromium OS kernel has been carrying versions of part of this hack for a while, based on some new custom notifiers [1]. I've rewritten as a simple function call between the drivers, which is OK because: * the PMU driver isn't enabled, and we don't have this problem at all (the firmware should have left us in an OK state, and there are no runtime conflicts); or * the PMU driver is present, and is a single instance. And the power-domain driver cannot be removed, so there's no lifetime management to worry about. For completeness, there's a 'dmc_pmu_mutex' to guard (likely theoretical?) probe()-time races. It's OK for the memory controller driver to start running before the PMU, because the PMU will avoid any critical actions during the block() sequence. [0] The RK3399 TRM for PMU_CRU_GATEDIS_CON0 only talks about ungating clocks. Based on experimentation, we've found that it does not power up the necessary PLLs. [1] CHROMIUM: soc: rockchip: power-domain: Add notifier to dmc driver https://chromium-review.googlesource.com/q/I242dbd706d352f74ff706f5cbf42ebb92f9bcc60 Notably, the Chromium solution only handled conflict (a), not (b). In practice, item (b) wasn't a problem in many cases because we never managed to fully power off PLLs. Now that the (upstream) video decoder driver performs runtime clock management, we often power off NPLL. Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-05-07net: dsa: felix: perform MDB migration based on ocelot->multicast listVladimir Oltean1-0/+3
The felix driver is the only user of dsa_port_walk_mdbs(), and there isn't even a good reason for it, considering that the host MDB entries are already saved by the ocelot switch lib in the ocelot->multicast list. Rewrite the multicast entry migration procedure around the ocelot->multicast list so we can delete dsa_port_walk_mdbs(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06net: mscc: ocelot: mark traps with a bool instead of keeping them in a listVladimir Oltean1-1/+1
Since the blamed commit, VCAP filters can appear on more than one list. If their action is "trap", they are chained on ocelot->traps via filter->trap_list. This is in addition to their normal placement on the VCAP block->rules list head. Therefore, when we free a VCAP filter, we must remove it from all lists it is a member of, including ocelot->traps. There are at least 2 bugs which are direct consequences of this design decision. First is the incorrect usage of list_empty(), meant to denote whether "filter" is chained into ocelot->traps via filter->trap_list. This does not do the correct thing, because list_empty() checks whether "head->next == head", but in our case, head->next == head->prev == NULL. So we dereference NULL pointers and die when we call list_del(). Second is the fact that not all places that should remove the filter from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(), which is where we have the main kfree(filter). By keeping freed filters in ocelot->traps we end up in a use-after-free in felix_update_trapping_destinations(). Attempting to fix all the buggy patterns is a whack-a-mole game which makes the driver unmaintainable. Actually this is what the previous patch version attempted to do: https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/ but it introduced another set of bugs, because there are other places in which create VCAP filters, not just ocelot_vcap_filter_create(): - ocelot_trap_add() - felix_tag_8021q_vlan_add_rx() - felix_tag_8021q_vlan_add_tx() Relying on the convention that all those code paths must call INIT_LIST_HEAD(&filter->trap_list) is not going to scale. So let's do what should have been done in the first place and keep a bool in struct ocelot_vcap_filter which denotes whether we are looking at a trapping rule or not. Iterating now happens over the main VCAP IS2 block->rules. The advantage is that we no longer risk having stale references to a freed filter, since it is only present in that list. Fixes: e42bd4ed09aa ("net: mscc: ocelot: keep traps in a list") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03net: mscc: ocelot: add missed parentheses around macro argumentColin Foster1-1/+1
Commit 2f187bfa6f35 ("net: ethernet: ocelot: remove the need for num_stats initializer") added a macro that patchwork warned it lacked parentheses around an argument. Correct this mistake. Fixes: 2f187bfa6f35 ("net: ethernet: ocelot: remove the need for num_stats initializer") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03net: mscc: ocelot: remove unnecessary variableColin Foster1-5/+2
Commit 2f187bfa6f35 ("net: ethernet: ocelot: remove the need for num_stats initializer") added a flags field to the ocelot stats structure. The same behavior can be achieved without this additional field taking up extra memory. Remove this structure element to free up RAM Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-30net: ethernet: ocelot: remove the need for num_stats initializerColin Foster1-0/+10
There is a desire to share the oclot_stats_layout struct outside of the current vsc7514 driver. In order to do so, the length of the array needs to be known at compile time, and defined in the struct ocelot and struct felix_info. Since the array is defined in a .c file and would be declared in the header file via: extern struct ocelot_stat_layout[]; the size of the array will not be known at compile time to outside modules. To fix this, remove the need for defining the number of stats at compile time and allow this number to be determined at initialization. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-25Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+1
Pull drm updates from Dave Airlie: "Lots of work all over, Intel improving DG2 support, amdkfd CRIU support, msm new hw support, and faster fbdev support. dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device" * tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits) drm/i915/display: Do not re-enable PSR after it was marked as not reliable drm/i915/display: Fix HPD short pulse handling for eDP drm/amdgpu: Use drm_mode_copy() drm/radeon: Use drm_mode_copy() drm/amdgpu: Use ternary operator in `vcn_v1_0_start()` drm/amdgpu: Remove pointless on stack mode copies drm/amd/pm: fix indenting in __smu_cmn_reg_print_error() drm/amdgpu/dc: fix typos in comments drm/amdgpu: fix typos in comments drm/amd/pm: fix typos in comments drm/amdgpu: Add stolen reserved memory for MI25 SRIOV. drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations. drm/amdkfd: evict svm bo worker handle error drm/amdgpu/vcn: fix vcn ring test failure in igt reload test drm/amdgpu: only allow secure submission on rings which support that drm/amdgpu: fixed the warnings reported by kernel test robot drm/amd/display: 3.2.177 drm/amd/display: [FW Promotion] Release 0.0.108.0 drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2 drm/amd/display: Wait for hubp read line for Pollock ...
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds2-25/+106
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-24Merge tag 'arm-drivers-5.18' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "There are a few separately maintained driver subsystems that we merge through the SoC tree, notable changes are: - Memory controller updates, mainly for Tegra and Mediatek SoCs, and clarifications for the memory controller DT bindings - SCMI firmware interface updates, in particular a new transport based on OPTEE and support for atomic operations. - Cleanups to the TEE subsystem, refactoring its memory management For SoC specific drivers without a separate subsystem, changes include - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP Layerscape SoCs. - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L, and Qualcomm SM8450. - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older NVIDIA Tegra chips" * tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits) ARM: spear: fix typos in comments soc/microchip: fix invalid free in mpfs_sys_controller_delete soc: s4: Add support for power domains controller dt-bindings: power: add Amlogic s4 power domains bindings ARM: at91: add support in soc driver for new SAMA5D29 soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC memory: emif: check the pointer temp in get_device_details() memory: emif: Add check for setup_interrupts dt-bindings: arm: mediatek: mmsys: add support for MT8186 dt-bindings: mediatek: add compatible for MT8186 pwrap soc: mediatek: pwrap: add pwrap driver for MT8186 SoC soc: mediatek: mmsys: add mmsys reset control for MT8186 soc: mediatek: mtk-infracfg: Disable ACP on MT8192 soc: ti: k3-socinfo: Add AM62x JTAG ID soc: mediatek: add MTK mutex support for MT8186 soc: mediatek: mmsys: add mt8186 mmsys routing table soc: mediatek: pm-domains: Add support for mt8186 dt-bindings: power: Add MT8186 power domains soc: mediatek: pm-domains: Add support for mt8195 ...
2022-03-24Merge tag 'arm-soc-5.18' of ↵Linus Torvalds2-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "SoC specific code is generally used for older platforms that don't (yet) use device tree to do the same things. - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller from NXP. At the moment this is still incomplete as other portions are merged through different trees. - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms gets removed, now the Arm NOMMU platforms are limited to the Cortex-M family of microcontrollers - Two old PXA boards get removed, along with corresponding driver bits. - Continued cleanup of the Intel IXP4xx platforms, removing some remnants of the old board files. - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung - CPU idle support for AT91 - A system controller driver for Polarfire" * tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: remove support for NOMMU ARMv4/v5 ARM: PXA: fix up decompressor code soc: microchip: make mpfs_sys_controller_put static ARM: pxa: remove Intel Imote2 and Stargate 2 boards ARM: mmp: Fix failure to remove sram device ARM: mstar: Select ARM_ERRATA_814220 soc: add microchip polarfire soc system controller ARM: at91: Kconfig: select PM_OPP ARM: at91: PM: add cpu idle support for sama7g5 ARM: at91: ddr: fix typo to align with datasheet naming ARM: at91: ddr: align macro definitions ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency ARM: ixp4xx: Convert to SPARSE_IRQ and P2V ARM: ixp4xx: Drop all common code ARM: ixp4xx: Drop custom DMA coherency and bouncing ARM: ixp4xx: Remove feature bit accessors net: ixp4xx_hss: Check features using syscon net: ixp4xx_eth: Drop platform data support soc: ixp4xx-npe: Access syscon regs using regmap soc: ixp4xx: Add features from regmap helper ...
2022-03-24Merge tag 'media/v5.18-1' of ↵Linus Torvalds1-20/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a major reorg at platform Kconfig/Makefile files, organizing them per vendor. The other media Kconfig/Makefile files also sorted - New sensor drivers: hi847, isl7998x, ov08d10 - New Amphion vpu decoder stateful driver - New Atmel microchip csi2dc driver - tegra-vde driver promoted from staging - atomisp: some fixes for it to work on BYT - imx7-mipi-csis driver promoted from staging and renamed - camss driver got initial support for VFE hardware version Titan 480 - mtk-vcodec has gained support for MT8192 - lots of driver changes, fixes and improvements * tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits) media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST media: amphion: cleanup media device if register it fail media: amphion: fix some issues to improve robust media: amphion: fix some error related with undefined reference to __divdi3 media: amphion: fix an issue that using pm_runtime_get_sync incorrectly media: vidtv: use vfree() for memory allocated with vzalloc() media: m5mols/m5mols.h: document new reset field media: pixfmt-yuv-planar.rst: fix PIX_FMT labels media: platform: Remove unnecessary print function dev_err() media: amphion: Add missing of_node_put() in vpu_core_parse_dt() media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done() media: platform: amphion: Fix build error without MAILBOX media: spi: Kconfig: Place SPI drivers on a single menu media: i2c: Kconfig: move camera drivers to the top media: atomisp: fix bad usage at error handling logic media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/ media: media/*/Kconfig: sort entries media: Kconfig: cleanup VIDEO_DEV dependencies media: platform/*/Kconfig: make manufacturer menus more uniform media: platform: Create vendor/{Makefile,Kconfig} files ...
2022-03-18net: mscc: ocelot: offload per-flow mirroring using tc-mirred and VCAP IS2Vladimir Oltean1-0/+2
Per-flow mirroring with the VCAP IS2 TCAM (in itself handled as an offload for tc-flower) is done by setting the MIRROR_ENA bit from the action vector of the filter. The packet is mirrored to the port mask configured in the ANA:ANA:MIRRORPORTS register (the same port mask as the destinations for port-based mirroring). Functionality was tested with: tc qdisc add dev swp3 clsact tc filter add dev swp3 ingress protocol ip \ flower skip_sw ip_proto icmp \ action mirred egress mirror dev swp1 and pinging through swp3, while seeing that the ICMP replies are mirrored towards swp1. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: mscc: ocelot: add port mirroring support using tc-matchallVladimir Oltean1-0/+9
Ocelot switches perform port-based ingress mirroring if ANA:PORT:PORT_CFG field SRC_MIRROR_ENA is set, and egress mirroring if the port is in ANA:ANA:EMIRRORPORTS. Both ingress-mirrored and egress-mirrored frames are copied to the port mask from ANA:ANA:MIRRORPORTS. So the choice of limiting to a single mirror port via ocelot_mirror_get() and ocelot_mirror_put() may seem bizarre, but the hardware model doesn't map very well to the user space model. If the user wants to mirror the ingress of swp1 towards swp2 and the ingress of swp3 towards swp4, we'd have to program ANA:ANA:MIRRORPORTS with BIT(2) | BIT(4), and that would make swp1 be mirrored towards swp4 too, and swp3 towards swp2. But there are no tc-matchall rules to describe those actions. Now, we could offload a matchall rule with multiple mirred actions, one per desired mirror port, and force the user to stick to the multi-action rule format for subsequent matchall filters. But both DSA and ocelot have the flow_offload_has_one_action() check for the matchall offload, plus the fact that it will get cumbersome to cross-check matchall mirrors with flower mirrors (which will be added in the next patch). As a result, we limit the configuration to a single mirror port, with the possibility of lifting the restriction in the future. Frames injected from the CPU don't get egress-mirrored, since they are sent with the BYPASS bit in the injection frame header, and this bypasses the analyzer module (effectively also the mirroring logic). I don't know what to do/say about this. Functionality was tested with: tc qdisc add dev swp3 clsact tc filter add dev swp3 ingress \ matchall skip_sw \ action mirred egress mirror dev swp1 and pinging through swp3, while seeing that the ICMP replies are mirrored towards swp1. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-14net: dsa: felix: configure default-prio and dscp prioritiesVladimir Oltean1-0/+5
Follow the established programming model for this driver and provide shims in the felix DSA driver which call the implementations from the ocelot switch lib. The ocelot switchdev driver wasn't integrated with dcbnl due to lack of hardware availability. The switch doesn't have any fancy QoS classification enabled by default. The provided getters will create a default-prio app table entry of 0, and no dscp entry. However, the getters have been made to actually retrieve the hardware configuration rather than static values, to be future proof in case DSA will need this information from more call paths. For default-prio, there is a single field per port, in ANA_PORT_QOS_CFG, called QOS_DEFAULT_VAL. DSCP classification is enabled per-port, again via ANA_PORT_QOS_CFG (field QOS_DSCP_ENA), and individual DSCP values are configured as trusted or not through register ANA_DSCP_CFG (replicated 64 times). An untrusted DSCP value falls back to other QoS classification methods. If trusted, the selected ANA_DSCP_CFG register also holds the QoS class in the QOS_DSCP_VAL field. The hardware also supports DSCP remapping (DSCP value X is translated to DSCP value Y before the QoS class is determined based on the app table entry for Y) and DSCP packet rewriting. The dcbnl framework, for being so flexible in other useless areas, doesn't appear to support this. So this functionality has been left out. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08Merge tag 'at91-soc-5.18-2' of ↵Arnd Bergmann2-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/drivers AT91 SoC #2 for 5.18: - SAMA5D29 variant to the SAMA5D2 family in SoC driver. * tag 'at91-soc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: add support in soc driver for new SAMA5D29 soc: add microchip polarfire soc system controller ARM: at91: Kconfig: select PM_OPP ARM: at91: PM: add cpu idle support for sama7g5 ARM: at91: ddr: fix typo to align with datasheet naming ARM: at91: ddr: align macro definitions ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency Link: https://lore.kernel.org/r/20220304144216.23340-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-5/+9
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-27net: mscc: ocelot: enforce FDB isolation when VLAN-unawareVladimir Oltean1-10/+21
Currently ocelot uses a pvid of 0 for standalone ports and ports under a VLAN-unaware bridge, and the pvid of the bridge for ports under a VLAN-aware bridge. Standalone ports do not perform learning, but packets received on them are still subject to FDB lookups. So if the MAC DA that a standalone port receives has been also learned on a VLAN-unaware bridge port, ocelot will attempt to forward to that port, even though it can't, so it will drop packets. So there is a desire to avoid that, and isolate the FDBs of different bridges from one another, and from standalone ports. The ocelot switch library has two distinct entry points: the felix DSA driver and the ocelot switchdev driver. We need to code up a minimal bridge_num allocation in the ocelot switchdev driver too, this is copied from DSA with the exception that ocelot does not care about DSA trees, cross-chip bridging etc. So it only looks at its own ports that are already in the same bridge. The ocelot switchdev driver uses the bridge_num it has allocated itself, while the felix driver uses the bridge_num allocated by DSA. They are both stored inside ocelot_port->bridge_num by the common function ocelot_port_bridge_join() which receives the bridge_num passed by value. Once we have a bridge_num, we can only use it to enforce isolation between VLAN-unaware bridges. As far as I can see, ocelot does not have anything like a FID that further makes VLAN 100 from a port be different to VLAN 100 from another port with regard to FDB lookup. So we simply deny multiple VLAN-aware bridges. For VLAN-unaware bridges, we crop the 4000-4095 VLAN region and we allocate a VLAN for each bridge_num. This will be used as the pvid of each port that is under that VLAN-unaware bridge, for as long as that bridge is VLAN-unaware. VID 0 remains only for standalone ports. It is okay if all standalone ports use the same VID 0, since they perform no address learning, the FDB will contain no entry in VLAN 0, so the packets will always be flooded to the only possible destination, the CPU port. The CPU port module doesn't need to be member of the VLANs to receive packets, but if we use the DSA tag_8021q protocol, those packets are part of the data plane as far as ocelot is concerned, so there it needs to. Just ensure that the DSA tag_8021q CPU port is a member of all reserved VLANs when it is created, and is removed when it is deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25soc/tegra: bpmp: cleanup double word in commentTom Rix1-1/+1
Remove the second 'or'. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-25soc: add microchip polarfire soc system controllerConor Dooley1-2/+2
This driver provides an interface for other drivers to access the functions of the system controller on the Microchip PolarFire SoC. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220217101349.2374873-2-conor.dooley@microchip.com
2022-02-25ARM: at91: PM: add cpu idle support for sama7g5Claudiu Beznea1-0/+1
Add CPU idle support for SAMA7G5. Support will make use of PMC_CPU_RATIO register to divide the CPU clock by 16 before switching it to idle and use automatic self-refresh option of DDR controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220113144900.906370-5-claudiu.beznea@microchip.com
2022-02-25ARM: at91: ddr: fix typo to align with datasheet namingClaudiu Beznea1-1/+1
Fix typo on UDDRC_PWRCTL.SELFREF_SW bitmask to align with datasheet naming. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220113144900.906370-4-claudiu.beznea@microchip.com
2022-02-25ARM: at91: ddr: align macro definitionsClaudiu Beznea1-4/+4
Align all macro definitions. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220113144900.906370-3-claudiu.beznea@microchip.com
2022-02-25ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependencyClaudiu Beznea1-4/+0
Remove CONFIG_SOC_SAMA7 dependency to avoid having #ifdef preprocessor directives in driver code (arch/arm/mach-at91/pm.c). This prepares the code for next commits. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220113144900.906370-2-claudiu.beznea@microchip.com
2022-02-25net: dsa: felix: support FDB entries on offloaded LAG interfacesVladimir Oltean1-0/+12
This adds the logic in the Felix DSA driver and Ocelot switch library. For Ocelot switches, the DEST_IDX that is the output of the MAC table lookup is a logical port (equal to physical port, if no LAG is used, or a dynamically allocated number otherwise). The allocation we have in place for LAG IDs is different from DSA's, so we can't use that: - DSA allocates a continuous range of LAG IDs starting from 1 - Ocelot appears to require that physical ports and LAG IDs are in the same space of [0, num_phys_ports), and additionally, ports that aren't in a LAG must have physical port id == logical port id The implication is that an FDB entry towards a LAG might need to be deleted and reinstalled when the LAG ID changes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-19soc: fsl: Replace kernel.h with the necessary inclusionsAndy Shevchenko5-5/+9
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2022-02-17net: dsa: felix: update destinations of existing traps with ocelot-8021qVladimir Oltean1-3/+1
Historically, the felix DSA driver has installed special traps such that PTP over L2 works with the ocelot-8021q tagging protocol; commit 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") has the details. Then the ocelot switch library also gained more comprehensive support for PTP traps through commit 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets"). Right now, PTP over L2 works using ocelot-8021q via the traps it has set for itself, but nothing else does. Consolidating the two code blocks would make ocelot-8021q gain support for PTP over L4 and tc-flower traps, and at the same time avoid some code and TCAM duplication. The traps are similar in intent, but different in execution, so some explanation is required. The traps set up by felix_setup_mmio_filtering() are VCAP IS1 filters, which have a PAG that chains them to a VCAP IS2 filter, and the IS2 is where the 'trap' action resides. The traps set up by ocelot_trap_add(), on the other hand, have a single filter, in VCAP IS2. The reason for chaining VCAP IS1 and IS2 in Felix was to ensure that the hardcoded traps take precedence and cannot be overridden by the Ocelot switch library. So in principle, the PTP traps needed for ocelot-8021q in the Felix driver can rely on ocelot_trap_add(), but the filters need to be patched to account for a quirk that LS1028A has: the quirk_no_xtr_irq described in commit 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping"). Live-patching is done by iterating through the trap list every time we know it has been updated, and transforming a trap into a redirect + CPU copy if ocelot-8021q is in use. Making the DSA ocelot-8021q tagger work with the Ocelot traps means we can eliminate the dedicated OCELOT_VCAP_IS1_TAG_8021Q_PTP_MMIO and OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO cookies. To minimize the patch delta, OCELOT_VCAP_IS2_MRP_TRAP takes the place of OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO (the alternative would have been to left-shift all cookie numbers by 1). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: mscc: ocelot: annotate which traps need PTP timestampingVladimir Oltean1-0/+1
The ocelot switch library does not need this information, but the felix DSA driver does. As a reminder, the VSC9959 switch in LS1028A doesn't have an IRQ line for packet extraction, so to be notified that a PTP packet needs to be dequeued, it receives that packet also over Ethernet, by setting up a packet trap. The Felix driver needs to install special kinds of traps for packets in need of RX timestamps, such that the packets are replicated both over Ethernet and over the CPU port module. But the Ocelot switch library sets up more than one trap for PTP event messages; it also traps PTP general messages, MRP control messages etc. Those packets don't need PTP timestamps, so there's no reason for the Felix driver to send them to the CPU port module. By knowing which traps need PTP timestamps, the Felix driver can adjust the traps installed using ocelot_trap_add() such that only those will actually get delivered to the CPU port module. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: mscc: ocelot: keep traps in a listVladimir Oltean2-0/+2
When using the ocelot-8021q tagging protocol, the CPU port isn't configured as an NPI port, but is a regular port. So a "trap to CPU" operation is actually a "redirect" operation. So DSA needs to set up the trapping action one way or another, depending on the tagging protocol in use. To ease DSA's work of modifying the action, keep all currently installed traps in a list, so that DSA can live-patch them when the tagging protocol changes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: mscc: ocelot: avoid overlap in VCAP IS2 between PTP and MRP trapsVladimir Oltean1-8/+8
OCELOT_VCAP_IS2_TAG_8021Q_TXVLAN overlaps with OCELOT_VCAP_IS2_MRP_REDIRECT. To avoid this, make OCELOT_VCAP_IS2_MRP_REDIRECT take the cookie region from N to 2 * N - 1 (where N is ocelot->num_phys_ports). To avoid any risk that the singleton (not per port) VCAP IS2 filters overlap with per-port VCAP IS2 filters, we must ensure that the number of singleton filters is smaller than the number of physical ports. This is true right now, but may change in the future as switches with less ports get supported, or more singleton filters get added. So to be future-proof, let's move the singleton filters at the end of the range, where they won't overlap with anything to their right. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: mscc: ocelot: use a single VCAP filter for all MRP trapsVladimir Oltean1-1/+1
The MRP assist code installs a VCAP IS2 trapping rule for each port, but since the key and the action is the same, just the ingress port mask differs, there isn't any need to do this. We can save some space in the TCAM by using a single filter and adjusting the ingress port mask. Reuse the ocelot_trap_add() and ocelot_trap_del() functions for this purpose. Now that the cookies are no longer per port, we need to change the allocation scheme such that MRP traps use a fixed number. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: mscc: ocelot: delete OCELOT_MRP_CPUQVladimir Oltean1-2/+0
MRP frames are configured to be trapped to the CPU queue 7, and this number is reflected in the extraction header. However, the information isn't used anywhere, so just leave MRP frames to go to CPU queue 0 unless needed otherwise. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: mscc: ocelot: consolidate cookie allocation for private VCAP rulesVladimir Oltean1-0/+16
Every use case that needed VCAP filters (in order: DSA tag_8021q, MRP, PTP traps) has hardcoded filter identifiers that worked well enough for that use case alone. But when two or more of those use cases would be used together, some of those identifiers would overlap, leading to breakage. Add definitions for each cookie and centralize them in ocelot_vcap.h, such that the overlaps are more obvious. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net: mscc: ocelot: use bulk reads for statsColin Foster1-0/+8
Create and utilize bulk regmap reads instead of single access for gathering stats. The background reading of statistics happens frequently, and over a few contiguous memory regions. High speed PCIe buses and MMIO access will probably see negligible performance increase. Lower speed buses like SPI and I2C could see significant performance increase, since the bus configuration and register access times account for a large percentage of data transfer time. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net: mscc: ocelot: add ability to perform bulk readsColin Foster1-0/+5
Regmap supports bulk register reads. Ocelot does not. This patch adds support for Ocelot to invoke bulk regmap reads. That will allow any driver that performs consecutive reads over memory regions to optimize that access. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net: ocelot: align macros for consistencyColin Foster1-15/+29
In the ocelot.h file, several read / write macros were split across multiple lines, while others weren't. Split all macros that exceed the 80 character column width and match the style of the rest of the file. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01Merge tag 'drm-misc-next-2022-01-27' of ↵Dave Airlie1-0/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next [airlied: add two missing Kconfig] drm-misc-next for v5.18: UAPI Changes: - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL. Cross-subsystem Changes: - Assorted dt bindings updates. - Fix vga16fb vga checking on x86. - Fix extra semicolon in rwsem.h's _down_write_nest_lock. - Assorted small fixes to agp and fbdev drivers. - Fix oops in creating a udmabuf with 0 pages. - Hot-unplug firmware fb devices on forced removal - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy. Core Changes: - Mock a drm_plane in drm-plane-helper selftest. - Assorted bug fixes to device logging, dbi. - Use DP helper for sink count in mst. - Assorted documentation fixes. - Assorted small fixes. - Move DP headers to drm/dp, and add a drm dp helper module. - Move the buddy allocator from i915 to common drm. - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers. - Support microsoft extension for HMDs and specialized monitors. - Improve edid parser's deep color handling. - Add type 7 timing support to edid parser. - Add a weak backpointer to the ttm_bo from ttm_resource - Add 3 eDP panels. Driver Changes: - Add support for HDMI and JZ4780 to ingenic. - Add support for higher DP/eDP bitrates to nouveau. - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers. - Convert and revert exynos dsi support to bridge driver. - Add vcc supply regulator support for sn65dsi83. - More conversion of bridge/chipone-icn6211 to atomic. - Remove conflicting fb's from stm, and add support for new hw version. - Add device link in parade-ps8640 to fix suspend/resume. - Update Boe-tv110c9m init sequence. - Add wide screen support to AST2600. - Fix omapdrm implicit dma_buf fencing. - Add support for multiple overlay planes to vkms. - Convert bridge/anx7625 to atomic, add HDCP support, add eld support for audio, and fix HPD. - Add driver for ChromeOS privacy screen. - Handover display from firmware to vc4 more gracefully, and support nomodeset. - Add flexible and ycbcr pixel formats to stm/ltdc. - Convert exynos mipi dsi to atomic. - Add initial dual core group GPUs support to panfrost. - No longer add exclusive fence in amdgpu as shared fence. - Add CSC and full range supoprt to vc4. - Shutdown the display on system shutdown and unbind. - Add Multi-Inno Technology MI0700S4T-6 simple panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 01:29:23 +0300