summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2021-01-23net: sched: Add multi-queue support to sch_tree_lockMaxim Mikityanskiy1-4/+10
The existing qdiscs that set TCQ_F_MQROOT don't use sch_tree_lock. However, hardware-offloaded HTB will start setting this flag while also using sch_tree_lock. The current implementation of sch_tree_lock basically locks on qdisc->dev_queue->qdisc, and it works fine when the tree is attached to some queue. However, it's not the case for MQROOT qdiscs: such a qdisc is the root itself, and its dev_queue just points to queue 0, while not actually being used, because there are real per-queue qdiscs. This patch changes the logic of sch_tree_lock and sch_tree_unlock to lock the qdisc itself if it's the MQROOT. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23tcp: remove unused ICSK_TIME_EARLY_RETRANSPengcheng Yang1-3/+1
Since the early retransmit has been removed by commit bec41a11dd3d ("tcp: remove early retransmit"), we also remove the unused ICSK_TIME_EARLY_RETRANS macro. Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1611239473-27304-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22devlink: Support get and set state of port functionParav Pandit1-0/+32
devlink port function can be in active or inactive state. Allow users to get and set port function's state. When the port function it activated, its operational state may change after a while when the device is created and driver binds to it. Similarly on deactivation flow. To clearly describe the state of the port function and its device's operational state in the host system, define state and opstate attributes. Example of a PCI SF port which supports a port function: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev $ devlink port show pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached $ devlink port show pci/0000:06:00.0/32768 pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:88:88 state inactive opstate detached $ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active $ devlink port show pci/0000:06:00.0/32768 -jp { "port": { "pci/0000:06:00.0/32768": { "type": "eth", "netdev": "ens2f0npf0sf88", "flavour": "pcisf", "controller": 0, "pfnum": 0, "sfnum": 88, "external": false, "splittable": false, "function": { "hw_addr": "00:00:00:00:88:88", "state": "active", "opstate": "attached" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22devlink: Support add and delete devlink portParav Pandit1-0/+52
Extended devlink interface for the user to add and delete a port. Extend devlink to connect user requests to driver to add/delete a port in the device. Driver routines are invoked without holding devlink instance lock. This enables driver to perform several devlink objects registration, unregistration such as (port, health reporter, resource etc) by using existing devlink APIs. This also helps to uniformly use the code for port unregistration during driver unload and during port deletion initiated by user. Examples of add, show and delete commands: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev $ devlink port show pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached $ devlink port show pci/0000:06:00.0/32768 pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached $ udevadm test-builtin net_id /sys/class/net/eth6 Load module index Parsed configuration file /usr/lib/systemd/network/99-default.link Created link configuration context. Using default interface naming scheme 'v245'. ID_NET_NAMING_SCHEME=v245 ID_NET_NAME_PATH=enp6s0f0npf0sf88 ID_NET_NAME_SLOT=ens2f0npf0sf88 Unload module index Unloaded link configuration context. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22devlink: Introduce PCI SF port flavour and port attributeParav Pandit1-0/+16
A PCI sub-function (SF) represents a portion of the device similar to PCI VF. In an eswitch, PCI SF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with SF, and its representor netdevice, introduce a PCI SF port flavour. When devlink port flavour is PCI SF, fill up PCI SF attributes of the port. Extend port name creation using PCI PF and SF number scheme on best effort basis, so that vendor drivers can skip defining their own scheme. This is done as cApfNSfM, where A, N and M are controller, PCI PF and PCI SF number respectively. This is similar to existing naming for PCI PF and PCI VF ports. An example view of a PCI SF port: $ devlink port show pci/0000:06:00.0/32768 pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:88:88 state active opstate attached $ devlink port show pci/0000:06:00.0/32768 -jp { "port": { "pci/0000:06:00.0/32768": { "type": "eth", "netdev": "ens2f0npf0sf88", "flavour": "pcisf", "controller": 0, "pfnum": 0, "sfnum": 88, "splittable": false, "function": { "hw_addr": "00:00:00:00:88:88", "state": "active", "opstate": "attached" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22cfg80211: change netdev registration/unregistration semanticsJohannes Berg1-8/+32
We used to not require anything in terms of registering netdevs with cfg80211, using a netdev notifier instead. However, in the next patch reducing RTNL locking, this causes big problems, and the simplest way is to just require drivers to do things better. Change the registration/unregistration semantics to require the drivers to call cfg80211_(un)register_netdevice() when this is happening due to a cfg80211 request, i.e. add_virtual_intf() or del_virtual_intf() (or if it somehow has to happen in any other cfg80211 callback). Otherwise, in other contexts, drivers may continue to use the normal netdev (un)registration functions as usual. Internally, we still use the netdev notifier and track (by the new wdev->registered bool) if the wdev had already been added to cfg80211 or not. Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: Add phyrate conversion support for extended MCS in 60GHz bandMax Chen1-0/+2
The current phyrate conversion does not include extended MCS and provides incorrect rates. Add a flag for extended MCS in DMG and add corresponding phyrate table for the correct conversions using base MCS in DMG specs. Signed-off-by: Max Chen <mxchen@codeaurora.org> Link: https://lore.kernel.org/r/1609977050-7089-2-git-send-email-mxchen@codeaurora.org [reduce data size, make a single WARN] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21mac80211: add rx decapsulation offload supportFelix Fietkau1-0/+16
This allows drivers to pass 802.3 frames to mac80211, with some restrictions: - the skb must be passed with a valid sta - fast-rx needs to be active for the sta - monitor mode needs to be disabled mac80211 will tell the driver when it is safe to enable rx decap offload for a particular station. In order to implement support, a driver must: - call ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD) - implement ops->sta_set_decap_offload - mark 802.3 frames with RX_FLAG_8023 If it doesn't want to enable offload for some vif types, it can mask out IEEE80211_OFFLOAD_DECAP_ENABLED in vif->offload_flags from within the .add_interface or .update_vif_offload driver ops Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-6-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21net/fq_impl: do not maintain a backlog-sorted list of flowsFelix Fietkau2-52/+71
A sorted flow list is only needed to drop packets in the biggest flow when hitting the overmemory condition. By scanning flows only when needed, we can avoid paying the cost of maintaining the list under normal conditions In order to avoid scanning lots of empty flows and touching too many cold cache lines, a bitmap of flows with backlog is maintained Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21net/fq_impl: drop get_default_func, move default flow to fq_tinFelix Fietkau2-6/+6
Simplifies the code and prepares for a rework of scanning for flows on overmemory drop. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21net/fq_impl: bulk-free packets from a flow on overmemoryFelix Fietkau1-11/+44
This is similar to what sch_fq_codel does. It also amortizes the worst case cost of a follow-up patch that changes the selection of the biggest flow for dropping packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21net/sched: cls_flower add CT_FLAGS_INVALID flag supportwenxu1-0/+1
This patch add the TCA_FLOWER_KEY_CT_FLAGS_INVALID flag to match the ct_state with invalid for conntrack. Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/1611045110-682-1-git-send-email-wenxu@ucloud.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVEStanislav Fomichev2-0/+3
Add custom implementation of getsockopt hook for TCP_ZEROCOPY_RECEIVE. We skip generic hooks for TCP_ZEROCOPY_RECEIVE and have a custom call in do_tcp_getsockopt using the on-stack data. This removes 3% overhead for locking/unlocking the socket. Without this patch: 3.38% 0.07% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt | --3.30%--__cgroup_bpf_run_filter_getsockopt | --0.81%--__kmalloc With the patch applied: 0.52% 0.12% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt_kern Note, exporting uapi/tcp.h requires removing netinet/tcp.h from test_progs.h because those headers have confliciting definitions. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210115163501.805133-2-sdf@google.com
2021-01-21net, xdp: Introduce xdp_build_skb_from_frame utility routineLorenzo Bianconi1-0/+2
Introduce xdp_build_skb_from_frame utility routine to build the skb from xdp_frame. Respect to __xdp_build_skb_from_frame, xdp_build_skb_from_frame will allocate the skb object. Rely on xdp_build_skb_from_frame in veth driver. Introduce missing xdp metadata support in veth_xdp_rcv_one routine. Add missing metadata support in veth_xdp_rcv_one(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/94ade9e853162ae1947941965193190da97457bc.1610475660.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-21net, xdp: Introduce __xdp_build_skb_from_frame utility routineLorenzo Bianconi1-0/+3
Introduce __xdp_build_skb_from_frame utility routine to build the skb from xdp_frame. Rely on __xdp_build_skb_from_frame in cpumap code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/4f9f4c6b3dd3933770c617eb6689dbc0c6e25863.1610475660.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-6/+20
Conflicts: drivers/net/can/dev.c commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug") commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") Code move. drivers/net/dsa/b53/b53_common.c commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"") commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects") Field rename. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20tcp: fix TCP socket rehash stats mis-accountingYuchung Cheng1-5/+12
The previous commit 32efcc06d2a1 ("tcp: export count for rehash attempts") would mis-account rehashing SNMP and socket stats: a. During handshake of an active open, only counts the first SYN timeout b. After handshake of passive and active open, stop updating after (roughly) TCP_RETRIES1 recurring RTOs c. After the socket aborts, over count timeout_rehash by 1 This patch fixes this by checking the rehash result from sk_rethink_txhash. Fixes: 32efcc06d2a1 ("tcp: export count for rehash attempts") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net/bonding: Declare TLS RX device offload supportTariq Toukan1-1/+1
Following the description in previous patch (for TX): As the bond interface is being bypassed by the TLS module, interacting directly against the lower devs, there is no way for the bond interface to disable its device offload capabilities, as long as the mode/policy config allows it. Hence, the feature flag is not directly controllable, but just reflects the offload status based on the logic under bond_sk_check(). Here we just declare RX device offload support, and expose it via the NETIF_F_HW_TLS_RX flag. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net/bonding: Implement TLS TX device offloadTariq Toukan1-0/+2
Implement TLS TX device offload for bonding interfaces. This allows kTLS sockets running on a bond to benefit from the device offload on capable lower devices. To allow a simple and fast maintenance of the TLS context in SW and lower devices, we bind the TLS socket to a specific lower dev. To achieve a behavior similar to SW kTLS, we support only balance-xor and 802.3ad modes, with xmit_hash_policy=layer3+4. This is enforced in bond_sk_check(), done in a previous patch. For the above configuration, the SW implementation keeps picking the same exact lower dev for all the socket's SKBs. The device offload behaves similarly, making the decision once at the connection creation. Per socket, the TLS module should work directly with the lowest netdev in chain, to call the tls_dev_ops operations. As the bond interface is being bypassed by the TLS module, interacting directly against the lower devs, there is no way for the bond interface to disable its device offload capabilities, as long as the mode/policy config allows it. Hence, the feature flag is not directly controllable, but just reflects the current offload status based on the logic under bond_sk_check(). Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net/bonding: Implement ndo_sk_get_lower_devTariq Toukan1-0/+2
Add ndo_sk_get_lower_dev() implementation for bond interfaces. Support only for the cases where the socket's and SKBs' hash yields identical value for the whole connection lifetime. Here we restrict it to L3+4 sockets only, with xmit_hash_policy==LAYER34 and bond modes xor/802.3ad. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net_sched: fix RTNL deadlock again caused by request_module()Cong Wang1-1/+4
tcf_action_init_1() loads tc action modules automatically with request_module() after parsing the tc action names, and it drops RTNL lock and re-holds it before and after request_module(). This causes a lot of troubles, as discovered by syzbot, because we can be in the middle of batch initializations when we create an array of tc actions. One of the problem is deadlock: CPU 0 CPU 1 rtnl_lock(); for (...) { tcf_action_init_1(); -> rtnl_unlock(); -> request_module(); rtnl_lock(); for (...) { tcf_action_init_1(); -> tcf_idr_check_alloc(); // Insert one action into idr, // but it is not committed until // tcf_idr_insert_many(), then drop // the RTNL lock in the _next_ // iteration -> rtnl_unlock(); -> rtnl_lock(); -> a_o->init(); -> tcf_idr_check_alloc(); // Now waiting for the same index // to be committed -> request_module(); -> rtnl_lock() // Now waiting for RTNL lock } rtnl_unlock(); } rtnl_unlock(); This is not easy to solve, we can move the request_module() before this loop and pre-load all the modules we need for this netlink message and then do the rest initializations. So the loop breaks down to two now: for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) { struct tc_action_ops *a_o; a_o = tc_action_load_ops(name, tb[i]...); ops[i - 1] = a_o; } for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) { act = tcf_action_init_1(ops[i - 1]...); } Although this looks serious, it only has been reported by syzbot, so it seems hard to trigger this by humans. And given the size of this patch, I'd suggest to make it to net-next and not to backport to stable. This patch has been tested by syzbot and tested with tdc.py by me. Fixes: 0fedc63fadf0 ("net_sched: commit action insertions together") Reported-and-tested-by: syzbot+82752bc5331601cf4899@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+b3b63b6bff456bd95294@syzkaller.appspotmail.com Reported-by: syzbot+ba67b12b1ca729912834@syzkaller.appspotmail.com Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20210117005657.14810-1-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19tcp: fix TCP_USER_TIMEOUT with zero windowEnke Chen1-0/+3
The TCP session does not terminate with TCP_USER_TIMEOUT when data remain untransmitted due to zero window. The number of unanswered zero-window probes (tcp_probes_out) is reset to zero with incoming acks irrespective of the window size, as described in tcp_probe_timer(): RFC 1122 4.2.2.17 requires the sender to stay open indefinitely as long as the receiver continues to respond probes. We support this by default and reset icsk_probes_out with incoming ACKs. This counter, however, is the wrong one to be used in calculating the duration that the window remains closed and data remain untransmitted. Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the actual issue. In this patch a new timestamp is introduced for the socket in order to track the elapsed time for the zero-window probes that have not been answered with any non-zero window ack. Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT") Reported-by: William McCall <william.mccall@gmail.com> Co-developed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Enke Chen <enchen@paloaltonetworks.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-16netfilter: nft_dynset: honor stateful expressions in set definitionPablo Neira Ayuso1-0/+2
If the set definition contains stateful expressions, allocate them for the newly added entries from the packet path. Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-16net: dsa: add ops for devlink-sbVladimir Oltean1-0/+34
Switches that care about QoS might have hardware support for reserving buffer pools for individual ports or traffic classes, and configuring their sizes and thresholds. Through devlink-sb (shared buffers), this is all configurable, as well as their occupancy being viewable. Add the plumbing in DSA for these operations. Individual drivers still need to call devlink_sb_register() with the shared buffers they want to expose. A helper was not created in DSA for this purpose (unlike, say, dsa_devlink_params_register), since in my opinion it does not bring any benefit over plainly calling devlink_sb_register() directly. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-16Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-0/+19
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-01-16 1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support, that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman. 2) Add support for using kernel module global variables (__ksym externs in BPF programs) retrieved via module's BTF, from Andrii Nakryiko. 3) Generalize BPF stackmap's buildid retrieval and add support to have buildid stored in mmap2 event for perf, from Jiri Olsa. 4) Various fixes for cross-building BPF sefltests out-of-tree which then will unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker. 5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann. 6) Clean up driver's XDP buffer init and split into two helpers to init per- descriptor and non-changing fields during processing, from Lorenzo Bianconi. 7) Minor misc improvements to libbpf & bpftool, from Ian Rogers. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits) perf: Add build id data in mmap2 event bpf: Add size arg to build_id_parse function bpf: Move stack_map_get_build_id into lib bpf: Document new atomic instructions bpf: Add tests for new BPF atomic operations bpf: Add bitwise atomic instructions bpf: Pull out a macro for interpreting atomic ALU operations bpf: Add instructions for atomic_[cmp]xchg bpf: Add BPF_FETCH field / create atomic_fetch_add instruction bpf: Move BPF_STX reserved field check into BPF_STX verifier code bpf: Rename BPF_XADD and prepare to encode other atomics in .imm bpf: x86: Factor out a lookup table for some ALU opcodes bpf: x86: Factor out emission of REX byte bpf: x86: Factor out emission of ModR/M for *(reg + off) tools/bpftool: Add -Wall when building BPF programs bpf, libbpf: Avoid unused function warning on bpf_tail_call_static selftests/bpf: Install btf_dump test cases selftests/bpf: Fix installation of urandom_read selftests/bpf: Move generated test files to $(TEST_GEN_FILES) selftests/bpf: Fix out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-16dsa: add support for Arrow XRS700x tag trailerGeorge McCollister1-0/+2
Add support for Arrow SpeedChips XRS700x single byte tag trailer. This is modeled on tag_trailer.c which works in a similar way. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15net: dsa: Link aggregation supportTobias Waldekranz1-0/+60
Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15cfg80211: fix a kerneldoc markupMauro Carvalho Chehab1-1/+1
A function has a different name between their prototype and its kernel-doc markup: ../include/net/cfg80211.h:1766: warning: expecting prototype for struct cfg80211_sar_chan_ranges. Prototype was for struct cfg80211_sar_freq_ranges instead Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/c7ed4bc4d9e992ead16d3d2df246f3b56dbfb1fb.1610610937.git.mchehab+huawei@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-13net: dsa: add optional stats64 supportOleksij Rempel1-1/+3
Allow DSA drivers to export stats64 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: switchdev: delete the transaction objectVladimir Oltean1-14/+0
Now that all users of struct switchdev_trans have been modified to do without it, we can remove this structure and the two helpers to determine the phase. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: dsa: remove the transactional logic from VLAN objectsVladimir Oltean1-3/+1
It should be the driver's business to logically separate its VLAN offloading into a preparation and a commit phase, and some drivers don't need / can't do this. So remove the transactional shim from DSA and let drivers propagate errors directly from the .port_vlan_add callback. It would appear that the code has worse error handling now than it had before. DSA is the only in-kernel user of switchdev that offloads one switchdev object to more than one port: for every VLAN object offloaded to a user port, that VLAN is also offloaded to the CPU port. So the "prepare for user port -> check for errors -> prepare for CPU port -> check for errors -> commit for user port -> commit for CPU port" sequence appears to make more sense than the one we are using now: "offload to user port -> check for errors -> offload to CPU port -> check for errors", but it is really a compromise. In the new way, we can catch errors from the commit phase that we previously had to ignore. But we have our hands tied and cannot do any rollback now: if we add a VLAN on the CPU port and it fails, we can't do the rollback by simply deleting it from the user port, because the switchdev API is not so nice with us: it could have simply been there already, even with the same flags. So we don't even attempt to rollback anything on addition error, just leave whatever VLANs managed to get offloaded right where they are. This should not be a problem at all in practice. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: dsa: remove the transactional logic from MDB entriesVladimir Oltean1-3/+1
For many drivers, the .port_mdb_prepare callback was not a good opportunity to avoid any error condition, and they would suppress errors found during the actual commit phase. Where a logical separation between the prepare and the commit phase existed, the function that used to implement the .port_mdb_prepare callback still exists, but now it is called directly from .port_mdb_add, which was modified to return an int code. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Wallei <linus.walleij@linaro.org> # RTL8366 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: switchdev: remove the transaction structure from port attributesVladimir Oltean2-7/+3
Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: switchdev: remove the transaction structure from port object notifiersVladimir Oltean1-3/+0
Since the introduction of the switchdev API, port objects were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port object notifier structures, and converts drivers to not look at this member. Where driver conversion is trivial (like in the case of the Marvell Prestera driver, NXP DPAA2 switch, TI CPSW, and Rocker drivers), it is done in this patch. Where driver conversion needs more attention (DSA, Mellanox Spectrum), the conversion is left for subsequent patches and here we only fake the prepare/commit phases at a lower level, just not in the switchdev notifier itself. Where the code has a natural structure that is best left alone as a preparation and a commit phase (as in the case of the Ocelot switch), that structure is left in place, just made to not depend upon the switchdev transactional model. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: switchdev: remove vid_begin -> vid_end range from VLAN objectsVladimir Oltean1-2/+1
The call path of a switchdev VLAN addition to the bridge looks something like this today: nbp_vlan_init | __br_vlan_set_default_pvid | | | | | br_afspec | | | | | | | v | | | br_process_vlan_info | | | | | | | v | | | br_vlan_info | | | / \ / | | / \ / | | / \ / | | / \ / v v v v v nbp_vlan_add br_vlan_add ------+ | ^ ^ | | | / | | | | / / / | \ br_vlan_get_master/ / v \ ^ / / br_vlan_add_existing \ | / / | \ | / / / \ | / / / \ | / / / \ | / / / v | | v / __vlan_add / / | / / | / v | / __vlan_vid_add | / \ | / v v v br_switchdev_port_vlan_add The ranges UAPI was introduced to the bridge in commit bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") (Jan 10 2015). But the VLAN ranges (parsed in br_afspec) have always been passed one by one, through struct bridge_vlan_info tmp_vinfo, to br_vlan_info. So the range never went too far in depth. Then Scott Feldman introduced the switchdev_port_bridge_setlink function in commit 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink"). That marked the introduction of the SWITCHDEV_OBJ_PORT_VLAN, which made full use of the range. But switchdev_port_bridge_setlink was called like this: br_setlink -> br_afspec -> switchdev_port_bridge_setlink Basically, the switchdev and the bridge code were not tightly integrated. Then commit 41c498b9359e ("bridge: restore br_setlink back to original") came, and switchdev drivers were required to implement .ndo_bridge_setlink = switchdev_port_bridge_setlink for a while. In the meantime, commits such as 0944d6b5a2fa ("bridge: try switchdev op first in __vlan_vid_add/del") finally made switchdev penetrate the br_vlan_info() barrier and start to develop the call path we have today. But remember, br_vlan_info() still receives VLANs one by one. Then Arkadi Sharshevsky refactored the switchdev API in 2017 in commit 29ab586c3d83 ("net: switchdev: Remove bridge bypass support from switchdev") so that drivers would not implement .ndo_bridge_setlink any longer. The switchdev_port_bridge_setlink also got deleted. This refactoring removed the parallel bridge_setlink implementation from switchdev, and left the only switchdev VLAN objects to be the ones offloaded from __vlan_vid_add (basically RX filtering) and __vlan_add (the latter coming from commit 9c86ce2c1ae3 ("net: bridge: Notify about bridge VLANs")). That is to say, today the switchdev VLAN object ranges are not used in the kernel. Refactoring the above call path is a bit complicated, when the bridge VLAN call path is already a bit complicated. Let's go off and finish the job of commit 29ab586c3d83 by deleting the bogus iteration through the VLAN ranges from the drivers. Some aspects of this feature never made too much sense in the first place. For example, what is a range of VLANs all having the BRIDGE_VLAN_INFO_PVID flag supposed to mean, when a port can obviously have a single pvid? This particular configuration _is_ denied as of commit 6623c60dc28e ("bridge: vlan: enforce no pvid flag in vlan ranges"), but from an API perspective, the driver still has to play pretend, and only offload the vlan->vid_end as pvid. And the addition of a switchdev VLAN object can modify the flags of another, completely unrelated, switchdev VLAN object! (a VLAN that is PVID will invalidate the PVID flag from whatever other VLAN had previously been offloaded with switchdev and had that flag. Yet switchdev never notifies about that change, drivers are supposed to guess). Nonetheless, having a VLAN range in the API makes error handling look scarier than it really is - unwinding on errors and all of that. When in reality, no one really calls this API with more than one VLAN. It is all unnecessary complexity. And despite appearing pretentious (two-phase transactional model and all), the switchdev API is really sloppy because the VLAN addition and removal operations are not paired with one another (you can add a VLAN 100 times and delete it just once). The bridge notifies through switchdev of a VLAN addition not only when the flags of an existing VLAN change, but also when nothing changes. There are switchdev drivers out there who don't like adding a VLAN that has already been added, and those checks don't really belong at driver level. But the fact that the API contains ranges is yet another factor that prevents this from being addressed in the future. Of the existing switchdev pieces of hardware, it appears that only Mellanox Spectrum supports offloading more than one VLAN at a time, through mlxsw_sp_port_vlan_set. I have kept that code internal to the driver, because there is some more bookkeeping that makes use of it, but I deleted it from the switchdev API. But since the switchdev support for ranges has already been de facto deleted by a Mellanox employee and nobody noticed for 4 years, I'm going to assume it's not a biggie. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> # switchdev and mlxsw Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09net, xdp: Introduce xdp_prepare_buff utility routineLorenzo Bianconi1-0/+12
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-09net, xdp: Introduce xdp_init_buff utility routineLorenzo Bianconi1-0/+7
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-08cfg80211/mac80211: fix kernel-doc for SAR APIsJohannes Berg2-1/+5
A stray @ caused the kernel-doc parser to not understand this, fix that. Also add some missing kernel-doc. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 6bdb68cef7bf ("nl80211: add common API to configure SAR power limitations") Fixes: c534e093d865 ("mac80211: add ieee80211_set_sar_specs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build only Link: https://lore.kernel.org/r/20210106234740.96827c18f9bd.I8b9f0a9cbfe186931ef9640046f414371f216914@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-08net: dsa: remove the DSA specific notifiersVladimir Oltean1-42/+0
This effectively reverts commit 60724d4bae14 ("net: dsa: Add support for DSA specific notifiers"). The reason is that since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), it appears that there is a generic way to achieve the same purpose. The only user thus far, the Broadcom SYSTEMPORT driver, was converted to use the generic notifiers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net: dsa: export dsa_slave_dev_checkVladimir Oltean1-0/+6
Using the NETDEV_CHANGEUPPER notifications, drivers can be aware when they are enslaved to e.g. a bridge by calling netif_is_bridge_master(). Export this helper from DSA to get the equivalent functionality of determining whether the upper interface of a CHANGEUPPER notifier is a DSA switch interface or not. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net: dsa: move the Broadcom tag information in a separate header fileVladimir Oltean1-6/+0
It is a bit strange to see something as specific as Broadcom SYSTEMPORT bits in the main DSA include file. Move these away into a separate header, and have the tagger and the SYSTEMPORT driver include them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on foreign bridge ↵Vladimir Oltean1-0/+5
neighbors Some DSA switches (and not only) cannot learn source MAC addresses from packets injected from the CPU. They only perform hardware address learning from inbound traffic. This can be problematic when we have a bridge spanning some DSA switch ports and some non-DSA ports (which we'll call "foreign interfaces" from DSA's perspective). There are 2 classes of problems created by the lack of learning on CPU-injected traffic: - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss To illustrate the second class, consider the following situation, which is common in production equipment (wireless access points, where there is a WLAN interface and an Ethernet switch, and these form a single bridging domain). AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ ^ | | | | | | | Client A Client B | | | +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 will know that Clients A and B are reachable via wlan0 - the hardware fdb of a DSA switch driver today is not kept in sync with the software entries on other bridge ports, so it will not know that clients A and B are reachable via the CPU port UNLESS the hardware switch itself performs SA learning from traffic injected from the CPU. Nonetheless, a substantial number of switches don't. - the hardware fdb of the DSA switch on AP 2 may autonomously learn that Client A and B are reachable through swp0. Therefore, the software br0 of AP 2 also may or may not learn this. In the example we're illustrating, some Ethernet traffic has been going on, and br0 from AP 2 has indeed learnt that it can reach Client B through swp0. One of the wireless clients, say Client B, disconnects from AP 1 and roams to AP 2. The topology now looks like this: AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ | | | Client A | | | Client B | | | v +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 still knows that Client A is reachable via wlan0 (no change) - br0 of AP 1 will (possibly) know that Client B has left wlan0. There are cases where it might never find out though. Either way, DSA today does not process that notification in any way. - the hardware FDB of the DSA switch on AP 1 may learn autonomously that Client B can be reached via swp0, if it receives any packet with Client 1's source MAC address over Ethernet. - the hardware FDB of the DSA switch on AP 2 still thinks that Client B can be reached via swp0. It does not know that it has roamed to wlan0, because it doesn't perform SA learning from the CPU port. Now Client A contacts Client B. AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet segment. AP 2 sees a frame on swp0 and its fdb says that the destination is swp0. Hairpinning is disabled => drop. This problem comes from the fact that these switches have a 'blind spot' for addresses coming from software bridging. The generic solution is not to assume that hardware learning can be enabled somehow, but to listen to more bridge learning events. It turns out that the bridge driver does learn in software from all inbound frames, in __br_handle_local_finish. A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the addresses serviced by the bridge on 'foreign' interfaces. The software bridge also does the right thing on migration, by notifying that the old entry is deleted, so that does not need to be special-cased in DSA. When it is deleted, we just need to delete our static FDB entry towards the CPU too, and wait. The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE events received on its own interfaces, such as static FDB entries. Luckily we can change that, and DSA can listen to all switchdev FDB add/del events in the system and figure out if those events were emitted by a bridge that spans at least one of DSA's own ports. In case that is true, DSA will also offload that address towards its own CPU port, in the eventuality that there might be bridge clients attached to the DSA switch who want to talk to the station connected to the foreign interface. In terms of implementation, we need to keep the fdb_info->added_by_user check for the case where the switchdev event was targeted directly at a DSA switch port. But we don't need to look at that flag for snooped events. So the check is currently too late, we need to move it earlier. This also simplifies the code a bit, since we avoid uselessly allocating and freeing switchdev_work. We could probably do some improvements in the future. For example, multi-bridge support is rudimentary at the moment. If there are two bridges spanning a DSA switch's ports, and both of them need to service the same MAC address, then what will happen is that the migration of one of those stations will trigger the deletion of the FDB entry from the CPU port while it is still used by other bridge. That could be improved with reference counting but is left for another time. This behavior needs to be enabled at driver level by setting ds->assisted_learning_on_cpu_port = true. This is because we don't want to inflict a potential performance penalty (accesses through MDIO/I2C/SPI are expensive) to hardware that really doesn't need it because address learning on the CPU port works there. Reported-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07udp_tunnel: reshuffle NETIF_F_RX_UDP_TUNNEL_PORT checksJakub Kicinski1-0/+8
Move the NETIF_F_RX_UDP_TUNNEL_PORT feature check into udp_tunnel_nic_*_port() helpers, since they're always done right before the call. Add similar checks before calling the notifier. udp_tunnel_nic invokes the notifier without checking features which could result in some wasted cycles. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-05Merge tag 'net-5.11-rc3' of ↵Linus Torvalds3-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from netfilter, wireless and bpf trees. Current release - regressions: - mt76: fix NULL pointer dereference in mt76u_status_worker and mt76s_process_tx_queue - net: ipa: fix interconnect enable bug Current release - always broken: - netfilter: fixes possible oops in mtype_resize in ipset - ath11k: fix number of coding issues found by static analysis tools and spurious error messages Previous releases - regressions: - e1000e: re-enable s0ix power saving flows for systems with the Intel i219-LM Ethernet controllers to fix power use regression - virtio_net: fix recursive call to cpus_read_lock() to avoid a deadlock - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst() - sysfs: take the rtnl lock around XPS configuration - xsk: fix memory leak for failed bind and rollback reservation at NETDEV_TX_BUSY - r8169: work around power-saving bug on some chip versions Previous releases - always broken: - dcb: validate netlink message in DCB handler - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS to prevent unnecessary retries - vhost_net: fix ubuf refcount when sendmsg fails - bpf: save correct stopping point in file seq iteration - ncsi: use real net-device for response handler - neighbor: fix div by zero caused by a data race (TOCTOU) - bareudp: fix use of incorrect min_headroom size and a false positive lockdep splat from the TX lock - mvpp2: - clear force link UP during port init procedure in case bootloader had set it - add TCAM entry to drop flow control pause frames - fix PPPoE with ipv6 packet parsing - fix GoP Networking Complex Control config of port 3 - fix pkt coalescing IRQ-threshold configuration - xsk: fix race in SKB mode transmit with shared cq - ionic: account for vlan tag len in rx buffer len - stmmac: ignore the second clock input, current clock framework does not handle exclusive clock use well, other drivers may reconfigure the second clock Misc: - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow existing scheme" * tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event r8169: work around power-saving bug on some chip versions net: usb: qmi_wwan: add Quectel EM160R-GL selftests: mlxsw: Set headroom size of correct port net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag ibmvnic: fix: NULL pointer dereference. docs: networking: packet_mmap: fix old config reference docs: networking: packet_mmap: fix formatting for C macros vhost_net: fix ubuf refcount incorrectly when sendmsg fails bareudp: Fix use of incorrect min_headroom size bareudp: set NETIF_F_LLTX flag net: hdlc_ppp: Fix issues when mod_timer is called while timer is running atlantic: remove architecture depends erspan: fix version 1 check in gre_parse_header() net: hns: fix return value check in __lb_other_process() net: sched: prevent invalid Scell_log shift count net: neighbor: fix a crash caused by mod zero ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst() ...
2020-12-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-4/+5
Daniel Borkmann says: ==================== pull-request: bpf 2020-12-28 The following pull-request contains BPF updates for your *net* tree. There is a small merge conflict between bpf tree commit 69ca310f3416 ("bpf: Save correct stopping point in file seq iteration") and net tree commit 66ed594409a1 ("bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu"). The get_files_struct() does not exist anymore in net, so take the hunk in HEAD and add the `info->tid = curr_tid` to the error path: [...] curr_task = task_seq_get_next(ns, &curr_tid, true); if (!curr_task) { info->task = NULL; info->tid = curr_tid; return NULL; } /* set info->task and info->tid */ [...] We've added 10 non-merge commits during the last 9 day(s) which contain a total of 11 files changed, 75 insertions(+), 20 deletions(-). The main changes are: 1) Various AF_XDP fixes such as fill/completion ring leak on failed bind and fixing a race in skb mode's backpressure mechanism, from Magnus Karlsson. 2) Fix latency spikes on lockdep enabled kernels by adding a rescheduling point to BPF hashtab initialization, from Eric Dumazet. 3) Fix a splat in task iterator by saving the correct stopping point in the seq file iteration, from Jonathan Lemon. 4) Fix BPF maps selftest by adding retries in case hashtab returns EBUSY errors on update/deletes, from Andrii Nakryiko. 5) Fix BPF selftest error reporting to something more user friendly if the vmlinux BTF cannot be found, from Kamal Mostafa. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-29net: sched: prevent invalid Scell_log shift countRandy Dunlap1-1/+3
Check Scell_log shift size in red_check_params() and modify all callers of red_check_params() to pass Scell_log. This prevents a shift out-of-bounds as detected by UBSAN: UBSAN: shift-out-of-bounds in ./include/net/red.h:252:22 shift exponent 72 is too large for 32-bit type 'int' Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: syzbot+97c5bd9cc81eca63d36e@syzkaller.appspotmail.com Cc: Nogah Frankel <nogahf@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-21Merge tag '9p-for-5.11-rc1' of git://github.com/martinetd/linuxLinus Torvalds1-0/+7
Pull 9p update from Dominique Martinet: - fix long-standing limitation on open-unlink-fop pattern - add refcount to p9_fid (fixes the above and will allow for more cleanups and simplifications in the future) * tag '9p-for-5.11-rc1' of git://github.com/martinetd/linux: 9p: Remove unnecessary IS_ERR() check 9p: Uninitialized variable in v9fs_writeback_fid() 9p: Fix writeback fid incorrectly being attached to dentry 9p: apply review requests for fid refcounting 9p: add refcount to p9_fid struct fs/9p: search open fids first fs/9p: track open fids fs/9p: fix create-unlink-getattr idiom
2020-12-18xsk: Fix race in SKB mode transmit with shared cqMagnus Karlsson2-4/+5
Fix a race when multiple sockets are simultaneously calling sendto() when the completion ring is shared in the SKB case. This is the case when you share the same netdev and queue id through the XDP_SHARED_UMEM bind flag. The problem is that multiple processes can be in xsk_generic_xmit() and call the backpressure mechanism in xskq_prod_reserve(xs->pool->cq). As this is a shared resource in this specific scenario, a race might occur since the rings are single-producer single-consumer. Fix this by moving the tx_completion_lock from the socket to the pool as the pool is shared between the sockets that share the completion ring. (The pool is not shared when this is not the case.) And then protect the accesses to xskq_prod_reserve() with this lock. The tx_completion_lock is renamed cq_lock to better reflect that it protects accesses to the potentially shared completion ring. Fixes: 35fcde7f8deb ("xsk: support for Tx") Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20201218134525.13119-2-magnus.karlsson@gmail.com
2020-12-16Merge tag 'selinux-pr-20201214' of ↵Linus Torvalds2-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "While we have a small number of SELinux patches for v5.11, there are a few changes worth highlighting: - Change the LSM network hooks to pass flowi_common structs instead of the parent flowi struct as the LSMs do not currently need the full flowi struct and they do not have enough information to use it safely (missing information on the address family). This patch was discussed both with Herbert Xu (representing team netdev) and James Morris (representing team LSMs-other-than-SELinux). - Fix how we handle errors in inode_doinit_with_dentry() so that we attempt to properly label the inode on following lookups instead of continuing to treat it as unlabeled. - Tweak the kernel logic around allowx, auditallowx, and dontauditx SELinux policy statements such that the auditx/dontauditx are effective even without the allowx statement. Everything passes our test suite" * tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm,selinux: pass flowi_common instead of flowi to the LSM hooks selinux: Fix fall-through warnings for Clang selinux: drop super_block backpointer from superblock_security_struct selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling selinux: allow dontauditx and auditallowx rules to take effect without allowx selinux: fix error initialization in inode_doinit_with_dentry()
2020-12-16Merge tag 'net-next-5.11' of ↵Linus Torvalds43-679/+596
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 00:33:12 +0300