summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2021-02-13net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributesVladimir Oltean1-1/+6
This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13net: switchdev: propagate extack to port attributesVladimir Oltean1-2/+4
When a struct switchdev_attr is notified through switchdev, there is no way to report informational messages, unlike for struct switchdev_obj. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13Merge tag 'mac80211-next-for-net-next-2021-02-12' of ↵David S. Miller1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Last set of updates: * more minstrel work from Felix to reduce the probing overhead * QoS for nl80211 control port frames * STBC injection support * and a couple of small fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13mptcp: avoid lock_fast usage in accept pathFlorian Westphal1-0/+1
Once event support is added this may need to allocate memory while msk lock is held with softirqs disabled. Not using lock_fast also allows to do the allocation with GFP_KERNEL. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12cfg80211/mac80211: Support disabling HE modeBen Greear1-0/+2
Allow user to disable HE mode, similar to how VHT and HT can be disabled. Useful for testing. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20210204144610.25971-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12net/sock: Add kernel config SOCK_RX_QUEUE_MAPPINGTariq Toukan1-6/+6
Use a new config SOCK_RX_QUEUE_MAPPING to compile-in the socket RX queue field and logic, instead of the XPS config. This breaks dependency in XPS, and allows selecting it from non-XPS use cases, as we do in the next patch. In addition, use the new flag to wrap the logic in sk_rx_queue_get() and protect access to the sk_rx_queue_mapping field, while keeping the function exposed unconditionally, just like sk_rx_queue_set() and sk_rx_queue_clear(). Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernDavid S. Miller4-5/+57
el/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2021-02-11 Here's the main bluetooth-next pull request for 5.12: - Add support for advertising monitor offliading using Microsoft vendor extensions - Add firmware download support for MediaTek MT7921U USB devices - Suspend-related fixes for Qualcomm devices - Add support for Intel GarfieldPeak controller - Various other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: initialize net->net_cookie at netns setupEric Dumazet1-3/+1
It is simpler to make net->net_cookie a plain u64 written once in setup_net() instead of looping and using atomic64 helpers. Lorenz Bauer wants to add SO_NETNS_COOKIE socket option and this patch would makes his patch series simpler. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Lorenz Bauer <lmb@cloudflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: dsa: add support for offloading HSRGeorge McCollister1-0/+13
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding on DSA switches. Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch. The DSA switch driver should then set netdev feature flags for the HSR/PRP operation that it offloads. NETIF_F_HW_HSR_TAG_INS NETIF_F_HW_HSR_TAG_RM NETIF_F_HW_HSR_FWD NETIF_F_HW_HSR_DUP Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12devlink: Fix dmac_filter trap name, align to its documentationAya Levin1-1/+1
%s/dest_mac_filter/dmac_filter/g Fixes: e78ab164591f ("devlink: Add DMAC filter generic packet trap") Signed-off-by: Aya Levin <ayal@nvidia.com> Reported-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+0
2021-02-09IPv6: Add "offload failed" indication to routesAmit Cohen1-2/+3
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv6 routes, so that users will have better visibility into the offload process. 'struct fib6_info' is extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase struct size. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09IPv4: Add "offload failed" indication to routesAmit Cohen1-1/+2
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias', and 'struct fib_rt_info' are extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase structs size. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STATHoratiu Vultur1-2/+0
Now that MRP started to use also SWITCHDEV_ATTR_ID_PORT_STP_STATE to notify HW, then SWITCHDEV_ATTR_ID_MRP_PORT_STAT is not used anywhere else, therefore we can remove it. Fixes: c284b545900830 ("switchdev: mrp: Extend switchdev API to offload MRP") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextJakub Kicinski5-15/+18
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Remove indirection and use nf_ct_get() instead from nfnetlink_log and nfnetlink_queue, from Florian Westphal. 2) Add weighted random twos choice least-connection scheduling for IPVS, from Darby Payne. 3) Add a __hash placeholder in the flow tuple structure to identify the field to be included in the rhashtable key hash calculation. 4) Add a new nft_parse_register_load() and nft_parse_register_store() to consolidate register load and store in the core. 5) Statify nft_parse_register() since it has no more module clients. 6) Remove redundant assignment in nft_cmp, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: netfilter: nftables: remove redundant assignment of variable err netfilter: nftables: statify nft_parse_register() netfilter: nftables: add nft_parse_register_store() and use it netfilter: nftables: add nft_parse_register_load() and use it netfilter: flowtable: add hash offset field to tuple ipvs: add weighted random twos choice algorithm netfilter: ctnetlink: remove get_ct indirection ==================== Link: https://lore.kernel.org/r/20210206015005.23037-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05netfilter: move handlers to net/ip_vs.hLeon Romanovsky1-0/+11
Fix the following compilation warnings: net/netfilter/ipvs/ip_vs_proto_tcp.c:147:1: warning: no previous prototype for 'tcp_snat_handler' [-Wmissing-prototypes] 147 | tcp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, | ^~~~~~~~~~~~~~~~ net/netfilter/ipvs/ip_vs_proto_udp.c:136:1: warning: no previous prototype for 'udp_snat_handler' [-Wmissing-prototypes] 136 | udp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, | ^~~~~~~~~~~~~~~~ Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05net/core: move gro function declarations to separate headerLeon Romanovsky1-0/+12
Fir the following compilation warnings: 1031 | INDIRECT_CALLABLE_SCOPE void udp_v6_early_demux(struct sk_buff *skb) net/ipv6/ip6_offload.c:182:41: warning: no previous prototype for ‘ipv6_gro_receive’ [-Wmissing-prototypes] 182 | INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head, | ^~~~~~~~~~~~~~~~ net/ipv6/ip6_offload.c:320:29: warning: no previous prototype for ‘ipv6_gro_complete’ [-Wmissing-prototypes] 320 | INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff) | ^~~~~~~~~~~~~~~~~ net/ipv6/ip6_offload.c:182:41: warning: no previous prototype for ‘ipv6_gro_receive’ [-Wmissing-prototypes] 182 | INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head, | ^~~~~~~~~~~~~~~~ net/ipv6/ip6_offload.c:320:29: warning: no previous prototype for ‘ipv6_gro_complete’ [-Wmissing-prototypes] 320 | INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff) Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05ipv6: move udp declarations to net/udp.hLeon Romanovsky1-0/+3
Fix the following compilation warning: net/ipv6/udp.c:1031:30: warning: no previous prototype for 'udp_v6_early_demux' [-Wmissing-prototypes] 1031 | INDIRECT_CALLABLE_SCOPE void udp_v6_early_demux(struct sk_buff *skb) | ^~~~~~~~~~~~~~~~~~ net/ipv6/udp.c:1072:29: warning: no previous prototype for 'udpv6_rcv' [-Wmissing-prototypes] 1072 | INDIRECT_CALLABLE_SCOPE int udpv6_rcv(struct sk_buff *skb) | ^~~~~~~~~ Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05udp: call udp_encap_enable for v6 sockets when enabling encapXin Long2-2/+2
When enabling encap for a ipv6 socket without udp_encap_needed_key increased, UDP GRO won't work for v4 mapped v6 address packets as sk will be NULL in udp4_gro_receive(). This patch is to enable it by increasing udp_encap_needed_key for v6 sockets in udp_tunnel_encap_enable(), and correspondingly decrease udp_encap_needed_key in udpv6_destroy_sock(). v1->v2: - add udp_encap_disable() and export it. v2->v3: - add the change for rxrpc and bareudp into one patch, as Alex suggested. v3->v4: - move rxrpc part to another patch. Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04tcp: use a smaller percpu_counter batch size for sk_allocWei Wang1-2/+6
Currently, a percpu_counter with the default batch size (2*nr_cpus) is used to record the total # of active sockets per protocol. This means sk_sockets_allocated_read_positive() could be off by +/-2*(nr_cpus^2). This under/over-estimation could lead to wrong memory suppression conditions in __sk_raise_mem_allocated(). Fix this by using a more reasonable fixed batch size of 16. See related commit cf86a086a180 ("net/dst: use a smaller percpu_counter batch for dst entries accounting") that addresses a similar issue. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Link: https://lore.kernel.org/r/20210202193408.1171634-1-weiwan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04net, veth: Alloc skb in bulk for ndo_xdp_xmitLorenzo Bianconi1-0/+1
Split ndo_xdp_xmit and ndo_start_xmit use cases in veth_xdp_rcv routine in order to alloc skbs in bulk for XDP_PASS verdict. Introduce xdp_alloc_skb_bulk utility routine to alloc skb bulk list. The proposed approach has been tested in the following scenario: eth (ixgbe) --> XDP_REDIRECT --> veth0 --> (remote-ns) veth1 --> XDP_PASS XDP_REDIRECT: xdp_redirect_map bpf sample XDP_PASS: xdp_rxq_info bpf sample traffic generator: pkt_gen sending udp traffic on a remote device bpf-next master: ~3.64Mpps bpf-next + skb bulking allocation: ~3.79Mpps Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/a14a30d3c06fff24e13f836c733d80efc0bd6eb5.1611957532.git.lorenzo@kernel.org
2021-02-04net: indirect call helpers for ipv4/ipv6 dst_check functionsBrian Vazquez1-1/+6
This patch avoids the indirect call for the common case: ip6_dst_check and ipv4_dst_check Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04net: use indirect call helpers for dst_mtuBrian Vazquez1-1/+3
This patch avoids the indirect call for the common case: ip6_mtu and ipv4_mtu Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04net: use indirect call helpers for dst_outputBrian Vazquez1-1/+7
This patch avoids the indirect call for the common case: ip6_output and ip_output Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04net: use indirect call helpers for dst_inputBrian Vazquez1-1/+5
This patch avoids the indirect call for the common case: ip_local_deliver and ip6_input Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03Merge tag 'mac80211-next-for-net-next-2021-02-02' of ↵Jakub Kicinski1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time, only RTNL locking reduction fallout. - cfg80211_dev_rename() requires RTNL - cfg80211_change_iface() and cfg80211_set_encryption() require wiphy mutex (was missing in wireless extensions) - cfg80211_destroy_ifaces() requires wiphy mutex - netdev registration can fail due to notifiers, and then notifiers are "unrolled", need to handle this properly * tag 'mac80211-next-for-net-next-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: cfg80211: fix netdev registration deadlock cfg80211: call cfg80211_destroy_ifaces() with wiphy lock held wext: call cfg80211_set_encryption() with wiphy lock held wext: call cfg80211_change_iface() with wiphy lock held nl80211: call cfg80211_dev_rename() under RTNL ==================== Link: https://lore.kernel.org/r/20210202144106.38207-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03net: ipv6: Emit notification when fib hardware flags are changedAmit Cohen2-8/+3
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. It is also possible for a route already installed in hardware to change its action and therefore its flags. For example, a host route that is trapping packets can be "promoted" to perform decapsulation following the installation of an IPinIP/VXLAN tunnel. Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed. The aim is to provide an indication to user-space (e.g., routing daemons) about the state of the route in hardware. Introduce a sysctl that controls this behavior. Keep the default value at 0 (i.e., do not emit notifications) for several reasons: - Multiple RTM_NEWROUTE notification per-route might confuse existing routing daemons. - Convergence reasons in routing daemons. - The extra notifications will negatively impact the insertion rate. - Not all users are interested in these notifications. Move fib6_info_hw_flags_set() to C file because it is no longer a short function. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03net: Pass 'net' struct as first argument to fib6_info_hw_flags_set()Amit Cohen1-2/+3
The next patch will emit notification when hardware flags are changed, in case that fib_notify_on_flag_change sysctl is set to 1. To know sysctl values, net struct is needed. This change is consistent with the IPv4 version, which gets 'net' struct as its first argument. Currently, the only callers of this function are mlxsw and netdevsim. Patch the callers to pass net. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03net: ipv4: Emit notification when fib hardware flags are changedAmit Cohen1-0/+2
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. It is also possible for a route already installed in hardware to change its action and therefore its flags. For example, a host route that is trapping packets can be "promoted" to perform decapsulation following the installation of an IPinIP/VXLAN tunnel. Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed. The aim is to provide an indication to user-space (e.g., routing daemons) about the state of the route in hardware. Introduce a sysctl that controls this behavior. Keep the default value at 0 (i.e., do not emit notifications) for several reasons: - Multiple RTM_NEWROUTE notification per-route might confuse existing routing daemons. - Convergence reasons in routing daemons. - The extra notifications will negatively impact the insertion rate. - Not all users are interested in these notifications. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+2
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02udp: ipv4: manipulate network header of NATed UDP GRO fraglistDongseok Yi1-1/+1
UDP/IP header of UDP GROed frag_skbs are not updated even after NAT forwarding. Only the header of head_skb from ip_finish_output_gso -> skb_gso_segment is updated but following frag_skbs are not updated. A call path skb_mac_gso_segment -> inet_gso_segment -> udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list does not try to update UDP/IP header of the segment list but copy only the MAC header. Update port, addr and check of each skb of the segment list in __udp_gso_segment_list. It covers both SNAT and DNAT. Fixes: 9fd1ff5d2ac7 (udp: Support UDP fraglist GRO/GSO.) Signed-off-by: Dongseok Yi <dseok.yi@samsung.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: sched: replaced invalid qdisc tree flush helper in qdisc_replaceAlexander Ovechkin1-1/+1
Commit e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers") introduced qdisc tree flush/purge helpers, but erroneously used flush helper instead of purge helper in qdisc_replace function. This issue was found in our CI, that tests various qdisc setups by configuring qdisc and sending data through it. Call of invalid helper sporadically leads to corruption of vt_tree/cf_tree of hfsc_class that causes kernel oops: Oops: 0000 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-8f6859df #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:rb_insert_color+0x18/0x190 Code: c3 31 c0 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 85 c0 0f 84 05 01 00 00 48 8b 10 f6 c2 01 0f 85 34 01 00 00 <48> 8b 4a 08 49 89 d0 48 39 c1 74 7d 48 85 c9 74 32 f6 01 01 75 2d RSP: 0018:ffffc900000b8bb0 EFLAGS: 00010246 RAX: ffff8881ef4c38b0 RBX: ffff8881d956e400 RCX: ffff8881ef4c38b0 RDX: 0000000000000000 RSI: ffff8881d956f0a8 RDI: ffff8881d956e4b0 RBP: 0000000000000000 R08: 000000d5c4e249da R09: 1600000000000000 R10: ffffc900000b8be0 R11: ffffc900000b8b28 R12: 0000000000000001 R13: 000000000000005a R14: ffff8881f0905000 R15: ffff8881f0387d00 FS: 0000000000000000(0000) GS:ffff8881f8b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000001f4796004 CR4: 0000000000060ee0 Call Trace: <IRQ> init_vf.isra.19+0xec/0x250 [sch_hfsc] hfsc_enqueue+0x245/0x300 [sch_hfsc] ? fib_rules_lookup+0x12a/0x1d0 ? __dev_queue_xmit+0x4b6/0x930 ? hfsc_delete_class+0x250/0x250 [sch_hfsc] __dev_queue_xmit+0x4b6/0x930 ? ip6_finish_output2+0x24d/0x590 ip6_finish_output2+0x24d/0x590 ? ip6_output+0x6c/0x130 ip6_output+0x6c/0x130 ? __ip6_finish_output+0x110/0x110 mld_sendpack+0x224/0x230 mld_ifc_timer_expire+0x186/0x2c0 ? igmp6_group_dropped+0x200/0x200 call_timer_fn+0x2d/0x150 run_timer_softirq+0x20c/0x480 ? tick_sched_do_timer+0x60/0x60 ? tick_sched_timer+0x37/0x70 __do_softirq+0xf7/0x2cb irq_exit+0xa0/0xb0 smp_apic_timer_interrupt+0x74/0x150 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers") Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru> Reported-by: Alexander Kuznetsov <wwfq@yandex-team.ru> Acked-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Acked-by: Dmitry Yakunin <zeil@yandex-team.ru> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20210201200049.299153-1-ovov@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01cfg80211: fix netdev registration deadlockJohannes Berg1-1/+3
If register_netdevice() fails after having called cfg80211's netdev notifier (cfg80211_netdev_notifier_call) it will call the notifier again with UNREGISTER. This would then lock the wiphy mutex because we're marked as registered, which causes a deadlock. Fix this by separately keeping track of whether or not we're in the middle of registering to also skip the notifier call on this unregister. Reported-by: syzbot+2ae0ca9d7737ad1a62b7@syzkaller.appspotmail.com Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210201192048.ed8bad436737.I7cae042c44b15f80919a285799a15df467e9d42d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-01Bluetooth: Skip eSCO 2M params when not supportedYu Liu1-0/+1
If a peer device doesn't support eSCO 2M we should skip the params that use it when setting up sync connection since they will always fail. Signed-off-by: Yu Liu <yudiliu@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-30tcp: shrink inet_connection_sock icsk_mtup enabled and probe_sizeNeal Cardwell1-3/+3
This commit shrinks inet_connection_sock by 4 bytes, by shrinking icsk_mtup.enabled from 32 bits to 1 bit, and shrinking icsk_mtup.probe_size from s32 to an unsuigned 31 bit field. This is to save space to compensate for the recent introduction of a new u32 in inet_connection_sock, icsk_probes_tstamp, in the recent bug fix commit 9d9b1ee0b2d1 ("tcp: fix TCP_USER_TIMEOUT with zero window"). This should not change functionality, since icsk_mtup.enabled is only ever set to 0 or 1, and icsk_mtup.probe_size can only be either 0 or a positive MTU value returned by tcp_mss_to_mtu() Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210129185438.1813237-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-30net: dsa: add a second tagger for Ocelot switches based on tag_8021qVladimir Oltean1-0/+2
There are use cases for which the existing tagger, based on the NPI (Node Processor Interface) functionality, is insufficient. Namely: - Frames injected through the NPI port bypass the frame analyzer, so no source address learning is performed, no TSN stream classification, etc. - Flow control is not functional over an NPI port (PAUSE frames are encapsulated in the same Extraction Frame Header as all other frames) - There can be at most one NPI port configured for an Ocelot switch. But in NXP LS1028A and T1040 there are two Ethernet CPU ports. The non-NPI port is currently either disabled, or operated as a plain user port (albeit an internally-facing one). Having the ability to configure the two CPU ports symmetrically could pave the way for e.g. creating a LAG between them, to increase bandwidth seamlessly for the system. So there is a desire to have an alternative to the NPI mode. This change keeps the default tagger for the Seville and Felix switches as "ocelot", but it can be changed via the following device attribute: echo ocelot-8021q > /sys/class/<dsa-master>/dsa/tagging Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-30net: dsa: allow changing the tag protocol via the "tagging" device attributeVladimir Oltean1-0/+9
Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-30net: dsa: keep a copy of the tagging protocol in the DSA switch treeVladimir Oltean1-1/+6
Cascading DSA switches can be done multiple ways. There is the brute force approach / tag stacking, where one upstream switch, located between leaf switches and the host Ethernet controller, will just happily transport the DSA header of those leaf switches as payload. For this kind of setups, DSA works without any special kind of treatment compared to a single switch - they just aren't aware of each other. Then there's the approach where the upstream switch understands the tags it transports from its leaves below, as it doesn't push a tag of its own, but it routes based on the source port & switch id information present in that tag (as opposed to DMAC & VID) and it strips the tag when egressing a front-facing port. Currently only Marvell implements the latter, and Marvell DSA trees contain only Marvell switches. So it is safe to say that DSA trees already have a single tag protocol shared by all switches, and in fact this is what makes the switches able to understand each other. This fact is also implied by the fact that currently, the tagging protocol is reported as part of a sysfs installed on the DSA master and not per port, so it must be the same for all the ports connected to that DSA master regardless of the switch that they belong to. It's time to make this official and enforce it (yes, this also means we won't have any "switch understands tag to some extent but is not able to speak it" hardware oddities that we'll support in the future). This is needed due to the imminent introduction of the dsa_switch_ops:: change_tag_protocol driver API. When that is introduced, we'll have to notify switches of the tagging protocol that they're configured to use. Currently the tag_ops structure pointer is held only for CPU ports. But there are switches which don't have CPU ports and nonetheless still need to be configured. These would be Marvell leaf switches whose upstream port is just a DSA link. How do we inform these of their tagging protocol setup/deletion? One answer to the above would be: iterate through the DSA switch tree's ports once, list the CPU ports, get their tag_ops, then iterate again now that we have it, and notify everybody of that tag_ops. But what to do if conflicts appear between one cpu_dp->tag_ops and another? There's no escaping the fact that conflict resolution needs to be done, so we can be upfront about it. Ease our work and just keep the master copy of the tag_ops inside the struct dsa_switch_tree. Reference counting is now moved to be per-tree too, instead of per-CPU port. There are many places in the data path that access master->dsa_ptr->tag_ops and we would introduce unnecessary performance penalty going through yet another indirection, so keep those right where they are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-30ip_gre: add csum offload support for gre headerXin Long1-12/+7
This patch is to add csum offload support for gre header: On the TX path in gre_build_header(), when CHECKSUM_PARTIAL's set for inner proto, it will calculate the csum for outer proto, and inner csum will be offloaded later. Otherwise, CHECKSUM_PARTIAL and csum_start/offset will be set for outer proto, and the outer csum will be offloaded later. On the GSO path in gre_gso_segment(), when CHECKSUM_PARTIAL is not set for inner proto and the hardware supports csum offload, CHECKSUM_PARTIAL and csum_start/offset will be set for outer proto, and outer csum will be offloaded later. Otherwise, it will do csum for outer proto by calling gso_make_checksum(). Note that SCTP has to do the csum by itself for non GSO path in sctp_packet_pack(), as gre_build_header() can't handle the csum with CHECKSUM_PARTIAL set for SCTP CRC csum offload. v1->v2: - remove the SCTP part, as GRE dev doesn't support SCTP CRC CSUM and it will always do checksum for SCTP in sctp_packet_pack() when it's not a GSO packet. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-30net: flow_offload: Add original direction flag to ct_metadataPaul Blakey1-0/+1
Give offloading drivers the direction of the offloaded ct flow, this will be used for matches on direction (ct_state +/-rpl). Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirkHans de Goede1-0/+8
Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices, completely drop from the bus on a system-suspend. These devices will have their driver unbound and rebound on resume (when the dropping of the bus gets detected) and will show up as a new HCI after resume. These devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But this may also actually cause problems, if the code doing the driver unbinding runs after the pm-notifier then the hci_suspend_notifier code will try to talk to a device which is now in an uninitialized state. This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows drivers to opt-out of the hci_suspend_notifier when they know beforehand that their device will be fully re-initialized / reprobed on resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29nexthop: Use enum to encode notification typeIdo Schimmel1-1/+6
Currently there are only two types of in-kernel nexthop notification. The two are distinguished by the 'is_grp' boolean field in 'struct nh_notifier_info'. As more notification types are introduced for more next-hop group types, a boolean is not an easily extensible interface. Instead, convert it to an enum. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29nexthop: Introduce to struct nh_grp_entry a per-type unionPetr Machata1-1/+6
The values that a next-hop group needs to keep track of depend on the group type. Introduce a union to separate fields specific to the mpath groups from fields specific to other group types. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net/af_iucv: don't track individual TX skbs for TRANS_HIPER socketsJulian Wiedmann1-1/+1
Stop maintaining the skb_send_q list for TRANS_HIPER sockets. Not only is it extra overhead, but keeping around a list of skb clones means that we later also have to match the ->sk_txnotify() calls against these clones and free them accordingly. The current matching logic (comparing the skbs' shinfo location) is frustratingly fragile, and breaks if the skb's head is mangled in any sort of way while passing from dev_queue_xmit() to the device's HW queue. Also adjust the interface for ->sk_txnotify(), to make clear that we don't actually care about any skb internals. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net/af_iucv: count packets in the xmit pathJulian Wiedmann1-0/+1
The TX code keeps track of all skbs that are in-flight but haven't actually been sent out yet. For native IUCV sockets that's not a huge deal, but with TRANS_HIPER sockets it would be much better if we didn't need to maintain a list of skb clones. Note that we actually only care about the _count_ of skbs in this stage of the TX pipeline. So as prep work for removing the skb tracking on TRANS_HIPER sockets, keep track of the skb count in a separate variable and pair any list {enqueue, unlink} with a count {increment, decrement}. Then replace all occurences where we currently look at the skb list's fill level. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-1/+6
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29Merge tag 'mlx5-updates-2021-01-13' of ↵Jakub Kicinski1-0/+100
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 subfunction support Parav Pandit says: This patchset introduces support for mlx5 subfunction (SF). A subfunction is a lightweight function that has a parent PCI function on which it is deployed. mlx5 subfunction has its own function capabilities and its own resources. This means a subfunction has its own dedicated queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from the parent PCI function. When subfunction is RDMA capable, it has its own QP1, GID table and rdma resources neither shared nor stolen from the parent PCI function. A subfunction has dedicated window in PCI BAR space that is not shared with the other subfunctions or parent PCI function. This ensures that all class devices of the subfunction accesses only assigned PCI BAR space. A Subfunction supports eswitch representation through which it supports tc offloads. User must configure eswitch to send/receive packets from/to subfunction port. Subfunctions share PCI level resources such as PCI MSI-X IRQs with their other subfunctions and/or with its parent PCI function. Subfunction support is discussed in detail in RFC [1] and [2]. RFC [1] and extension [2] describes requirements, design and proposed plumbing using devlink, auxiliary bus and sysfs for systemd/udev support. Functionality of this patchset is best explained using real examples further below. overview: -------- A subfunction can be created and deleted by a user using devlink port add/delete interface. A subfunction can be configured using devlink port function attribute before its activated. When a subfunction is activated, it results in an auxiliary device on the host PCI device where it is deployed. A driver binds to the auxiliary device that further creates supported class devices. example subfunction usage sequence: ----------------------------------- Change device to switchdev mode: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Add a devlink port of subfunction flavour: $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 Configure mac address of the port function: $ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88 Now activate the function: $ devlink port function set ens2f0npf0sf88 state active Now use the auxiliary device and class devices: $ devlink dev show pci/0000:06:00.0 auxiliary/mlx5_core.sf.4 $ ip link show 127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff altname enp6s0f0np0 129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff $ rdma dev show 43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112 44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112 After use inactivate the function: $ devlink port function set ens2f0npf0sf88 state inactive Now delete the subfunction port: $ devlink port del ens2f0npf0sf88 [1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/ [2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2 ================= * tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Add devlink subfunction port documentation devlink: Extend devlink port documentation for subfunctions devlink: Add devlink port documentation net/mlx5: SF, Port function state change support net/mlx5: SF, Add port add delete functionality net/mlx5: E-switch, Add eswitch helpers for SF vport net/mlx5: E-switch, Prepare eswitch to handle SF vport net/mlx5: SF, Add auxiliary device driver net/mlx5: SF, Add auxiliary device support net/mlx5: Introduce vhca state event notifier devlink: Support get and set state of port function devlink: Support add and delete devlink port devlink: Introduce PCI SF port flavour and port attribute devlink: Prepare code to fill multiple port function attributes ==================== Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28devlink: Add DMAC filter generic packet trapAya Levin1-0/+3
Add packet trap that can report packets that were dropped due to destination MAC filtering. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge tag 'mac80211-next-for-net-next-2021-01-27' of ↵Jakub Kicinski4-93/+261
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== More updates: * many minstrel improvements, including removal of the old minstrel in favour of minstrel_ht * speed improvements on FQ * support for RX decapsulation (header conversion) offload * RTNL reduction: limit RTNL usage in the wireless stack mostly to where really needed (regulatory not yet) to reduce contention on it * tag 'mac80211-next-for-net-next-2021-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (24 commits) mac80211: minstrel_ht: fix regression in the max_prob_rate fix virt_wifi: fix deadlock on RTNL cfg80211: avoid holding the RTNL when calling the driver cfg80211: change netdev registration/unregistration semantics mac80211: minstrel_ht: fix rounding error in throughput calculation mac80211: minstrel_ht: increase stats update interval mac80211: minstrel_ht: fix max probability rate selection mac80211: minstrel_ht: improve sample rate selection mac80211: minstrel_ht: improve ampdu length estimation mac80211: minstrel_ht: remove old ewma based rate average code mac80211: remove legacy minstrel rate control mac80211: minstrel_ht: add support for OFDM rates on non-HT clients mac80211: minstrel_ht: clean up CCK code mac80211: introduce aql_enable node in debugfs cfg80211: Add phyrate conversion support for extended MCS in 60GHz band cfg80211: add VHT rate entries for MCS-10 and MCS-11 mac80211: reduce peer HE MCS/NSS to own capabilities mac80211: remove NSS number of 160MHz if not support 160MHz for HE mac80211_hwsim: add 6GHz channels mac80211: add LDPC encoding to ieee80211_parse_tx_radiotap ... ==================== Link: https://lore.kernel.org/r/20210127210915.135550-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28bpf: Allow rewriting to ports under ip_unprivileged_port_startStanislav Fomichev1-0/+2
At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port to the privileged ones (< ip_unprivileged_port_start), but it will be rejected later on in the __inet_bind or __inet6_bind. Let's add another return value to indicate that CAP_NET_BIND_SERVICE check should be ignored. Use the same idea as we currently use in cgroup/egress where bit #1 indicates CN. Instead, for cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should be bypassed. v5: - rename flags to be less confusing (Andrey Ignatov) - rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags and accept BPF_RET_SET_CN (no behavioral changes) v4: - Add missing IPv6 support (Martin KaFai Lau) v3: - Update description (Martin KaFai Lau) - Fix capability restore in selftest (Martin KaFai Lau) v2: - Switch to explicit return code (Martin KaFai Lau) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 13:24:11 +0300