summaryrefslogtreecommitdiff
path: root/include/net/xfrm.h
AgeCommit message (Collapse)AuthorFilesLines
2025-01-28Merge tag 'ipsec-2025-01-27' of ↵Jakub Kicinski1-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2025-01-27 1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs. From Jianbo Liu. 2) Fix an out-of-bounds read on xfrm state lookup. From Florian Westphal. 3) Fix secpath handling on packet offload mode. From Alexandre Cassen. 4) Fix the usage of skb->sk in the xfrm layer. 5) Don't disable preemption while looking up cache state to fix PREEMPT_RT. From Sebastian Sewior. * tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Don't disable preemption while looking up cache state. xfrm: Fix the usage of skb->sk xfrm: delete intermediate secpath entry in packet offload mode xfrm: state: fix out-of-bounds read during lookup xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO ==================== Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06xfrm: delete intermediate secpath entry in packet offload modeAlexandre Cassen1-3/+13
Packets handled by hardware have added secpath as a way to inform XFRM core code that this path was already handled. That secpath is not needed at all after policy is checked and it is removed later in the stack. However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward), that secpath is not removed and packets which already were handled are reentered to the driver TX path with xfrm_offload set. The following kernel panic is observed in mlx5 in such case: mlx5_core 0000:04:00.0 enp4s0f0np0: Link up mlx5_core 0000:04:00.1 enp4s0f1np1: Link up Initializing XFRM netlink socket IPsec XFRM device driver BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] PREEMPT SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? show_regs+0x63/0x70 ? __die_body+0x20/0x60 ? __die+0x2b/0x40 ? page_fault_oops+0x15c/0x550 ? do_user_addr_fault+0x3ed/0x870 ? exc_page_fault+0x7f/0x190 ? asm_exc_page_fault+0x27/0x30 mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core] mlx5e_xmit+0x58e/0x1980 [mlx5_core] ? __fib_lookup+0x6a/0xb0 dev_hard_start_xmit+0x82/0x1d0 sch_direct_xmit+0xfe/0x390 __dev_queue_xmit+0x6d8/0xee0 ? __fib_lookup+0x6a/0xb0 ? internal_add_timer+0x48/0x70 ? mod_timer+0xe2/0x2b0 neigh_resolve_output+0x115/0x1b0 __neigh_update+0x26a/0xc50 neigh_update+0x14/0x20 arp_process+0x2cb/0x8e0 ? __napi_build_skb+0x5e/0x70 arp_rcv+0x11e/0x1c0 ? dev_gro_receive+0x574/0x820 __netif_receive_skb_list_core+0x1cf/0x1f0 netif_receive_skb_list_internal+0x183/0x2a0 napi_complete_done+0x76/0x1c0 mlx5e_napi_poll+0x234/0x7a0 [mlx5_core] __napi_poll+0x2d/0x1f0 net_rx_action+0x1a6/0x370 ? atomic_notifier_call_chain+0x3b/0x50 ? irq_int_handler+0x15/0x20 [mlx5_core] handle_softirqs+0xb9/0x2f0 ? handle_irq_event+0x44/0x60 irq_exit_rcu+0xdb/0x100 common_interrupt+0x98/0xc0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:pv_native_safe_halt+0xb/0x10 Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22 0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb 40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8 RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680 RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4 RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70 R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8 ? default_idle+0x9/0x20 arch_cpu_idle+0x9/0x10 default_idle_call+0x29/0xf0 do_idle+0x1f2/0x240 cpu_startup_entry+0x2c/0x30 rest_init+0xe7/0x100 start_kernel+0x76b/0xb90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc0/0x110 ? setup_ghcb+0xe/0x130 common_startup_64+0x13e/0x141 </TASK> Modules linked in: esp4_offload esp4 xfrm_interface xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binfmt_misc intel_rapl_msr intel_rapl_common kvm_amd ccp kvm input_leds serio_raw qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx libcrc32c raid1 raid0 mlx5_core crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 ahci mlxfw i2c_i801 libahci i2c_mux i2c_smbus psample virtio_rng pci_hyperv_intf aesni_intel crypto_simd cryptd CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x3b800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 5958372ddf62 ("xfrm: add RX datapath protection for IPsec packet offload mode") Signed-off-by: Alexandre Cassen <acassen@corp.free.fr> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-12-05xfrm: add generic iptfs defines and functionalityChristian Hopps1-0/+1
Define `XFRM_MODE_IPTFS` and `IPSEC_MODE_IPTFS` constants, and add these to switch case and conditionals adjacent with the existing TUNNEL modes. Signed-off-by: Christian Hopps <chopps@labn.net> Tested-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-12-05xfrm: add mode_cbs module functionalityChristian Hopps1-0/+43
Add a set of callbacks xfrm_mode_cbs to xfrm_state. These callbacks enable the addition of new xfrm modes, such as IP-TFS to be defined in modules. Signed-off-by: Christian Hopps <chopps@labn.net> Tested-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-11-06xfrm: Convert struct xfrm_dst_lookup_params -> tos to dscp_t.Guillaume Nault1-1/+2
Add type annotation to the "tos" field of struct xfrm_dst_lookup_params, to ensure that the ECN bits aren't mistakenly taken into account when doing route lookups. Rename that field (tos -> dscp) to make that change explicit. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-10-29xfrm: Add an inbound percpu state cache.Steffen Klassert1-0/+5
Now that we can have percpu xfrm states, the number of active states might increase. To get a better lookup performance, we add a percpu cache to cache the used inbound xfrm states. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Tested-by: Antony Antony <antony.antony@secunet.com> Tested-by: Tobias Brunner <tobias@strongswan.org>
2024-10-29xfrm: Cache used outbound xfrm states at the policy.Steffen Klassert1-0/+4
Now that we can have percpu xfrm states, the number of active states might increase. To get a better lookup performance, we cache the used xfrm states at the policy for outbound IPsec traffic. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Tested-by: Antony Antony <antony.antony@secunet.com> Tested-by: Tobias Brunner <tobias@strongswan.org>
2024-10-29xfrm: Add support for per cpu xfrm state handling.Steffen Klassert1-2/+3
Currently all flows for a certain SA must be processed by the same cpu to avoid packet reordering and lock contention of the xfrm state lock. To get rid of this limitation, the IETF standardized per cpu SAs in RFC 9611. This patch implements the xfrm part of it. We add the cpu as a lookup key for xfrm states and a config option to generate acquire messages for each cpu. With that, we can have on each cpu a SA with identical traffic selector so that flows can be processed in parallel on all cpus. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Tested-by: Antony Antony <antony.antony@secunet.com> Tested-by: Tobias Brunner <tobias@strongswan.org>
2024-09-23xfrm: respect ip protocols rules criteria when performing dst lookupsEyal Birger1-0/+2
The series in the "fixes" tag added the ability to consider L4 attributes in routing rules. The dst lookup on the outer packet of encapsulated traffic in the xfrm code was not adapted to this change, thus routing behavior that relies on L4 information is not respected. Pass the ip protocol information when performing dst lookups. Fixes: a25724b05af0 ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Tested-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-09-23xfrm: extract dst lookup parameters into a structEyal Birger1-13/+13
Preparation for adding more fields to dst lookup functions without changing their signatures. Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-08-28xfrm: minor update to sdb and xfrm_policy commentsFlorian Westphal1-5/+35
The spd is no longer maintained as a linear list. We also haven't been caching bundles in the xfrm_policy struct since 2010. While at it, add kdoc style comments for the xfrm_policy structure and extend the description of the current rbtree based search to mention why it needs to search the candidate set. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-08-24xfrm: policy: remove remaining use of inexact listFlorian Westphal1-1/+0
No consumers anymore, remove it. After this, insertion of policies no longer require list walk of all inexact policies but only those that are reachable via the candidate sets. This gives almost linear insertion speeds provided the inserted policies are for non-overlapping networks. Before: Inserted 1000 policies in 70 ms Inserted 10000 policies in 1155 ms Inserted 100000 policies in 216848 ms After: Inserted 1000 policies in 56 ms Inserted 10000 policies in 478 ms Inserted 100000 policies in 4580 ms Insertion of 1m entries takes about ~40s after this change on my test vm. Cc: Noel Kuntze <noel@familie-kuntze.de> Cc: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-08-23xfrm: Correct spelling in xfrm.hSimon Horman1-2/+2
Correct spelling in xfrm.h. As reported by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-26/+10
Merge in late fixes to prepare for the 6.11 net-next PR. Conflicts: 93c3a96c301f ("net: pse-pd: Do not return EOPNOSUPP if config is null") 4cddb0f15ea9 ("net: ethtool: pse-pd: Fix possible null-deref") 30d7b6727724 ("net: ethtool: Add new power limit get and set features") https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26xfrm: support sending NAT keepalives in ESP in UDP statesEyal Birger1-0/+10
Add the ability to send out RFC-3948 NAT keepalives from the xfrm stack. To use, Userspace sets an XFRM_NAT_KEEPALIVE_INTERVAL integer property when creating XFRM outbound states which denotes the number of seconds between keepalive messages. Keepalive messages are sent from a per net delayed work which iterates over the xfrm states. The logic is guarded by the xfrm state spinlock due to the xfrm state walk iterator. Possible future enhancements: - Adding counters to keep track of sent keepalives. - deduplicate NAT keepalives between states sharing the same nat keepalive parameters. - provisioning hardware offloads for devices capable of implementing this. - revise xfrm state list to use an rcu list in order to avoid running this under spinlock. Suggested-by: Paul Wouters <paul.wouters@aiven.io> Tested-by: Paul Wouters <paul.wouters@aiven.io> Tested-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-06-25xfrm: Fix unregister netdevice hang on hardware offload.Steffen Klassert1-26/+10
When offloading xfrm states to hardware, the offloading device is attached to the skbs secpath. If a skb is free is deferred, an unregister netdevice hangs because the netdevice is still refcounted. Fix this by removing the netdevice from the xfrm states when the netdevice is unregistered. To find all xfrm states that need to be cleared we add another list where skbs linked to that are unlinked from the lists (deleted) but not yet freed. Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c 35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization") 2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-01xfrm: Add Direction to the SA in or outAntony Antony1-0/+1
This patch introduces the 'dir' attribute, 'in' or 'out', to the xfrm_state, SA, enhancing usability by delineating the scope of values based on direction. An input SA will restrict values pertinent to input, effectively segregating them from output-related values. And an output SA will restrict attributes for output. This change aims to streamline the configuration process and improve the overall consistency of SA attributes during configuration. This feature sets the groundwork for future patches, including the upcoming IP-TFS patch. Signed-off-by: Antony Antony <antony.antony@secunet.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-04-26xfrm: Preserve vlan tags for transport mode software GROPaul Davey1-0/+3
The software GRO path for esp transport mode uses skb_mac_header_rebuild prior to re-injecting the packet via the xfrm_napi_dev. This only copies skb->mac_len bytes of header which may not be sufficient if the packet contains 802.1Q tags or other VLAN tags. Worse copying only the initial header will leave a packet marked as being VLAN tagged but without the corresponding tag leading to mangling when it is later untagged. The VLAN tags are important when receiving the decrypted esp transport mode packet after GRO processing to ensure it is received on the correct interface. Therefore record the full mac header length in xfrm*_transport_input for later use in corresponding xfrm*_transport_finish to copy the entire mac header when rebuilding the mac header for GRO. The skb->data pointer is left pointing skb->mac_header bytes after the start of the mac header as is expected by the network stack and network and transport header offsets reset to this location. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-02-06xfrm: get global statistics from the offloaded deviceLeon Romanovsky1-0/+3
Iterate over all SAs in order to fill global IPsec statistics. Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-02-06xfrm: generalize xdo_dev_state_update_curlft to allow statistics updateLeon Romanovsky1-7/+4
In order to allow drivers to fill all statistics, change the name of xdo_dev_state_update_curlft to be xdo_dev_state_update_stats. Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-12-15bpf: xfrm: Add bpf_xdp_get_xfrm_state() kfuncDaniel Xu1-0/+9
This commit adds an unstable kfunc helper to access internal xfrm_state associated with an SA. This is intended to be used for the upcoming IPsec pcpu work to assign special pcpu SAs to a particular CPU. In other words: for custom software RSS. That being said, the function that this kfunc wraps is fairly generic and used for a lot of xfrm tasks. I'm sure people will find uses elsewhere over time. This commit also adds a corresponding bpf_xdp_xfrm_state_release() kfunc to release the refcnt acquired by bpf_xdp_get_xfrm_state(). The verifier will require that all acquired xfrm_state's are released. Co-developed-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Antony Antony <antony.antony@secunet.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/a29699c42f5fad456b875c98dd11c6afc3ffb707.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-06xfrm: pass struct net to xfrm_decode_session wrappersFlorian Westphal1-6/+6
Preparation patch, extra arg is not used. No functional changes intended. This is needed to replace the xfrm session decode functions with the flow dissector. skb_flow_dissect() cannot be used as-is, because it attempts to deduce the 'struct net' to use for bpf program fetch from skb->sk or skb->dev, but xfrm code path can see skbs that have neither sk or dev filled in. So either flow dissector needs to try harder, e.g. by also trying skb->dst->dev, or we have to pass the struct net explicitly. Passing the struct net doesn't look too bad to me, most places already have it available or can derive it from the output device. Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/netdev/202309271628.27fd2187-oliver.sang@intel.com/ Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-10-06xfrm: Support GRO for IPv6 ESP in UDP encapsulationSteffen Klassert1-0/+2
This patch enables the GRO codepath for IPv6 ESP in UDP encapsulated packets. Decapsulation happens at L2 and saves a full round through the stack for each packet. This is also needed to support HW offload for ESP in UDP encapsulation. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Co-developed-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Antony Antony <antony.antony@secunet.com> Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
2023-10-06xfrm: Support GRO for IPv4 ESP in UDP encapsulationSteffen Klassert1-0/+2
This patch enables the GRO codepath for IPv4 ESP in UDP encapsulated packets. Decapsulation happens at L2 and saves a full round through the stack for each packet. This is also needed to support HW offload for ESP in UDP encapsulation. Enabling this would imporove performance for ESP in UDP datapath, i.e IPsec with NAT in between. By default GRP for ESP-in-UDP is disabled for UDP sockets. To enable this feature for an ESP socket, the following two options need to be set: 1. enable ESP-in-UDP: (this is already set by an IKE daemon). int type = UDP_ENCAP_ESPINUDP; setsockopt(fd, SOL_UDP, UDP_ENCAP, &type, sizeof(type)); 2. To enable GRO for ESP in UDP socket: type = true; setsockopt(fd, SOL_UDP, UDP_GRO, &type, sizeof(type)); Enabling ESP-in-UDP has the side effect of preventing the Linux stack from seeing ESP packets at the L3 (when ESP OFFLOAD is disabled), as packets are immediately decapsulated from UDP and decrypted. This change may affect nftable rules that match on ESP packets at L3. Also tcpdump won't see the ESP packet. Developers/admins are advised to review and adapt any nftable rules accordingly before enabling this feature to prevent potential rule breakage. Also tcpdump will not see from ESP packets from a ESP in UDP flow, when this is enabled. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Co-developed-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Antony Antony <antony.antony@secunet.com> Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
2023-09-28xfrm: Remove unused function declarationsYue Haibing1-2/+0
commit a269fbfc4e9f ("xfrm: state: remove extract_input indirection from xfrm_state_afinfo") left behind this. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-09-15ipv6: lockless IPV6_DONTFRAG implementationEric Dumazet1-1/+1
Move np->dontfrag flag to inet->inet_flags to fix data-races. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-01xfrm: don't skip free of empty state in acquire policyLeon Romanovsky1-0/+1
In destruction flow, the assignment of NULL to xso->dev caused to skip of xfrm_dev_state_free() call, which was called in xfrm_state_put(to_put) routine. Instead of open-coded variant of xfrm_dev_state_delete() and xfrm_dev_state_free(), let's use them directly. Fixes: f8a70afafc17 ("xfrm: add TX datapath support for IPsec packet offload mode") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-05-21xfrm: Treat already-verified secpath entries as optionalBenedict Wong1-0/+1
This change allows inbound traffic through nested IPsec tunnels to successfully match policies and templates, while retaining the secpath stack trace as necessary for netfilter policies. Specifically, this patch marks secpath entries that have already matched against a relevant policy as having been verified, allowing it to be treated as optional and skipped after a tunnel decapsulation (during which the src/dst/proto/etc may have changed, and the correct policy chain no long be resolvable). This approach is taken as opposed to the iteration in b0355dbbf13c, where the secpath was cleared, since that breaks subsequent validations that rely on the existence of the secpath entries (netfilter policies, or transport-in-tunnel mode, where policies remain resolvable). Fixes: b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels") Test: Tested against Android Kernel Unit Tests Test: Tested against Android CTS Signed-off-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-03-20xfrm: add new device offload acquire flagRaed Salem1-0/+5
During XFRM acquire flow, a default SA is created to be updated later, once acquire netlink message is handled in user space. When the relevant policy is offloaded this default SA is also offloaded to IPsec offload supporting driver, however this SA does not have context suitable for offloading in HW, nor is interesting to offload to HW, consequently needs a special driver handling apart from other offloaded SA(s). Add a special flag that marks such SA so driver can handle it correctly. Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/f5da0834d8c6b82ab9ba38bd4a0c55e71f0e3dab.1678714336.git.leon@kernel.org Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-12-12Merge tag 'for-netdev' of ↵Jakub Kicinski1-0/+17
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2022-12-11 We've added 74 non-merge commits during the last 11 day(s) which contain a total of 88 files changed, 3362 insertions(+), 789 deletions(-). The main changes are: 1) Decouple prune and jump points handling in the verifier, from Andrii. 2) Do not rely on ALLOW_ERROR_INJECTION for fmod_ret, from Benjamin. Merged from hid tree. 3) Do not zero-extend kfunc return values. Necessary fix for 32-bit archs, from Björn. 4) Don't use rcu_users to refcount in task kfuncs, from David. 5) Three reg_state->id fixes in the verifier, from Eduard. 6) Optimize bpf_mem_alloc by reusing elements from free_by_rcu, from Hou. 7) Refactor dynptr handling in the verifier, from Kumar. 8) Remove the "/sys" mount and umount dance in {open,close}_netns in bpf selftests, from Martin. 9) Enable sleepable support for cgrp local storage, from Yonghong. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (74 commits) selftests/bpf: test case for relaxed prunning of active_lock.id selftests/bpf: Add pruning test case for bpf_spin_lock bpf: use check_ids() for active_lock comparison selftests/bpf: verify states_equal() maintains idmap across all frames bpf: states_equal() must build idmap for all function frames selftests/bpf: test cases for regsafe() bug skipping check_id() bpf: regsafe() must not skip check_ids() docs/bpf: Add documentation for BPF_MAP_TYPE_SK_STORAGE selftests/bpf: Add test for dynptr reinit in user_ringbuf callback bpf: Use memmove for bpf_dynptr_{read,write} bpf: Move PTR_TO_STACK alignment check to process_dynptr_func bpf: Rework check_func_arg_reg_off bpf: Rework process_dynptr_func bpf: Propagate errors from process_* checks in check_func_arg bpf: Refactor ARG_PTR_TO_DYNPTR checks into process_dynptr_func bpf: Skip rcu_barrier() if rcu_trace_implies_rcu_gp() is true bpf: Reuse freed element in free_by_rcu during allocation selftests/bpf: Bring test_offload.py back to life bpf: Fix comment error in fixup_kfunc_call function bpf: Do not zero-extend kfunc return values ... ==================== Link: https://lore.kernel.org/r/20221212024701.73809-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-06xfrm: interface: Add unstable helpers for setting/getting XFRM metadata from ↵Eyal Birger1-0/+17
TC-BPF This change adds xfrm metadata helpers using the unstable kfunc call interface for the TC-BPF hooks. This allows steering traffic towards different IPsec connections based on logic implemented in bpf programs. This object is built based on the availability of BTF debug info. When setting the xfrm metadata, percpu metadata dsts are used in order to avoid allocating a metadata dst per packet. In order to guarantee safe module unload, the percpu dsts are allocated on first use and never freed. The percpu pointer is stored in net/core/filter.c so that it can be reused on module reload. The metadata percpu dsts take ownership of the original skb dsts so that they may be used as part of the xfrm transmission logic - e.g. for MTU calculations. Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Link: https://lore.kernel.org/r/20221203084659.1837829-3-eyal.birger@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-12-05xfrm: add support to HW update soft and hard limitsLeon Romanovsky1-0/+17
Both in RX and TX, the traffic that performs IPsec packet offload transformation is accounted by HW. It is needed to properly handle hard limits that require to drop the packet. It means that XFRM core needs to update internal counters with the one that accounted by the HW, so new callbacks are introduced in this patch. In case of soft or hard limit is occurred, the driver should call to xfrm_state_check_expire() that will perform key rekeying exactly as done by XFRM core. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: add RX datapath protection for IPsec packet offload modeLeon Romanovsky1-23/+32
Traffic received by device with enabled IPsec packet offload should be forwarded to the stack only after decryption, packet headers and trailers removed. Such packets are expected to be seen as normal (non-XFRM) ones, while not-supported packets should be dropped by the HW. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: add an interface to offload policyLeon Romanovsky1-0/+45
Extend netlink interface to add and delete XFRM policy from the device. This functionality is a first step to implement packet IPsec offload solution. Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: add new packet offload flagLeon Romanovsky1-0/+7
In the next patches, the xfrm core code will be extended to support new type of offload - packet offload. In that mode, both policy and state should be specially configured in order to perform whole offloaded data path. Full offload takes care of encryption, decryption, encapsulation and other operations with headers. As this mode is new for XFRM policy flow, we can "start fresh" with flag bits and release first and second bit for future use. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-11-25xfrm: add extack to xfrm_alloc_userspiSabrina Dubroca1-2/+3
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-11-25xfrm: add extack to xfrm_do_migrateSabrina Dubroca1-1/+2
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-29xfrm: pass extack down to xfrm_type ->init_stateSabrina Dubroca1-1/+2
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-22xfrm: add extack support to xfrm_init_replaySabrina Dubroca1-1/+1
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-22xfrm: add extack to __xfrm_init_stateSabrina Dubroca1-1/+2
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-22xfrm: add extack support to xfrm_dev_state_addSabrina Dubroca1-2/+3
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-08-29xfrm: interface: support collect metadata modeEyal Birger1-2/+9
This commit adds support for 'collect_md' mode on xfrm interfaces. Each net can have one collect_md device, created by providing the IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be altered and has no if_id or link device attributes. On transmit to this device, the if_id is fetched from the attached dst metadata on the skb. If exists, the link property is also fetched from the metadata. The dst metadata type used is METADATA_XFRM which holds these properties. On the receive side, xfrmi_rcv_cb() populates a dst metadata for each packet received and attaches it to the skb. The if_id used in this case is fetched from the xfrm state, and the link is fetched from the incoming device. This information can later be used by upper layers such as tc, ebpf, and ip rules. Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst metadata is postponed until after scrubing. Similarly, xfrm_input() is adapted to avoid dropping metadata dsts by only dropping 'valid' (skb_valid_dst(skb) == true) dsts. Policy matching on packets arriving from collect_md xfrmi devices is done by using the xfrm state existing in the skb's sec_path. The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session() is changed to keep the details of the if_id extraction tucked away in xfrm_interface.c. Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-07-25Merge branch 'master' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-07-20 1) Don't set DST_NOPOLICY in IPv4, a recent patch made this superfluous. From Eyal Birger. 2) Convert alg_key to flexible array member to avoid an iproute2 compile warning when built with gcc-12. From Stephen Hemminger. 3) xfrm_register_km and xfrm_unregister_km do always return 0 so change the type to void. From Zhengchao Shao. 4) Fix spelling mistake in esp6.c From Zhang Jiaming. 5) Improve the wording of comment above XFRM_OFFLOAD flags. From Petr Vaněk. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-11net: Find dst with sk's xfrm policy not ctl_sksewookseo1-0/+2
If we set XFRM security policy by calling setsockopt with option IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock' struct. However tcp_v6_send_response doesn't look up dst_entry with the actual socket but looks up with tcp control socket. This may cause a problem that a RST packet is sent without ESP encryption & peer's TCP socket can't receive it. This patch will make the function look up dest_entry with actual socket, if the socket has XFRM policy(sock_policy), so that the TCP response packet via this function can be encrypted, & aligned on the encrypted TCP socket. Tested: We encountered this problem when a TCP socket which is encrypted in ESP transport mode encryption, receives challenge ACK at SYN_SENT state. After receiving challenge ACK, TCP needs to send RST to establish the socket at next SYN try. But the RST was not encrypted & peer TCP socket still remains on ESTABLISHED state. So we verified this with test step as below. [Test step] 1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED). 2. Client tries a new connection on the same TCP ports(src & dst). 3. Server will return challenge ACK instead of SYN,ACK. 4. Client will send RST to server to clear the SOCKET. 5. Client will retransmit SYN to server on the same TCP ports. [Expected result] The TCP connection should be established. Cc: Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sehee Lee <seheele@google.com> Signed-off-by: Sewook Seo <sewookseo@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24xfrm: change the type of xfrm_register_km and xfrm_unregister_kmZhengchao Shao1-2/+2
Functions xfrm_register_km and xfrm_unregister_km do always return 0, change the type of functions to void. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-06-10net: rename reference+tracking helpersJakub Kicinski1-1/+1
Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+13
drivers/net/ethernet/mellanox/mlx5/core/main.c b33886971dbc ("net/mlx5: Initialize flow steering during driver probe") 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table") https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/ 16d42d313350 ("net/mlx5: Drain fw_reset when removing device") 8324a02c342a ("net/mlx5: Add exit route when waiting for FW") https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh e274f7154008 ("selftests: mptcp: add subflow limits test-cases") b6e074e171bc ("selftests: mptcp: add infinite map testcase") 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/ net/mptcp/options.c ba2c89e0ea74 ("mptcp: fix checksum byte order") 1e39e5a32ad7 ("mptcp: infinite mapping sending") ea66758c1795 ("tcp: allow MPTCP to update the announced window") https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/ net/mptcp/pm.c 95d686517884 ("mptcp: fix subflow accounting on close") 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/ net/mptcp/subflow.c ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") 0348c690ed37 ("mptcp: add the fallback check") f8d4bcacff3b ("mptcp: infinite mapping receiving") https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16xfrm: fix "disable_policy" flag use when arriving from different devicesEyal Birger1-1/+13
In IPv4 setting the "disable_policy" flag on a device means no policy should be enforced for traffic originating from the device. This was implemented by seting the DST_NOPOLICY flag in the dst based on the originating device. However, dsts are cached in nexthops regardless of the originating devices, in which case, the DST_NOPOLICY flag value may be incorrect. Consider the following setup: +------------------------------+ | ROUTER | +-------------+ | +-----------------+ | | ipsec src |----|-|ipsec0 | | +-------------+ | |disable_policy=0 | +----+ | | +-----------------+ |eth1|-|----- +-------------+ | +-----------------+ +----+ | | noipsec src |----|-|eth0 | | +-------------+ | |disable_policy=1 | | | +-----------------+ | +------------------------------+ Where ROUTER has a default route towards eth1. dst entries for traffic arriving from eth0 would have DST_NOPOLICY and would be cached and therefore can be reused by traffic originating from ipsec0, skipping policy check. Fix by setting a IPSKB_NOPOLICY flag in IPCB and observing it instead of the DST in IN/FWD IPv4 policy checks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-06xfrm: drop not needed flags variable in XFRM offload structLeon Romanovsky1-1/+0
After drivers were converted to rely on direction, the flags is not used anymore and can be removed. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-18 11:27:42 +0300