summaryrefslogtreecommitdiff
path: root/include/net/addrconf.h
AgeCommit message (Collapse)AuthorFilesLines
2024-08-26net: Correct spelling in headersSimon Horman1-1/+1
Correct spelling in Networking headers. As reported by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822-net-spell-v1-12-3a98971ce2d2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16ip: Move INFINITY_LIFE_TIME to addrconf.h.Kuniyuki Iwashima1-1/+3
INFINITY_LIFE_TIME is the common value used in IPv4 and IPv6 but defined in both .c files. Also, 0xffffffff used in addrconf_timeout_fixup() is INFINITY_LIFE_TIME. Let's move INFINITY_LIFE_TIME's definition to addrconf.h Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240809235406.50187-6-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-31Add support for PIO p flagPatrick Rohr1-3/+7
draft-ietf-6man-pio-pflag is adding a new flag to the Prefix Information Option to signal that the network can allocate a unique IPv6 prefix per client via DHCPv6-PD (see draft-ietf-v6ops-dhcp-pd-per-device). When ra_honor_pio_pflag is enabled, the presence of a P-flag causes SLAAC autoconfiguration to be disabled for that particular PIO. An automated test has been added in Android (r.android.com/3195335) to go along with this change. Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: David Lamparter <equinox@opensourcerouting.org> Cc: Simon Horman <horms@kernel.org> Signed-off-by: Patrick Rohr <prohr@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-10ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addrJiri Benc1-0/+4
Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane. In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen: 1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry. 2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled. 3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold). 4. The rcu is unlocked and the entry is freed. 5. The freed entry is returned. Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe. [ 41.506330] refcount_t: addition on 0; use-after-free. [ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130 [ 41.507413] Modules linked in: veth bridge stp llc [ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14 [ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130 [ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff [ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282 [ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000 [ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900 [ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff [ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000 [ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48 [ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000 [ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0 [ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.516799] Call Trace: [ 41.517037] <TASK> [ 41.517249] ? __warn+0x7b/0x120 [ 41.517535] ? refcount_warn_saturate+0xa5/0x130 [ 41.517923] ? report_bug+0x164/0x190 [ 41.518240] ? handle_bug+0x3d/0x70 [ 41.518541] ? exc_invalid_op+0x17/0x70 [ 41.520972] ? asm_exc_invalid_op+0x1a/0x20 [ 41.521325] ? refcount_warn_saturate+0xa5/0x130 [ 41.521708] ipv6_get_ifaddr+0xda/0xe0 [ 41.522035] inet6_rtm_getaddr+0x342/0x3f0 [ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10 [ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0 [ 41.523102] ? netlink_unicast+0x30f/0x390 [ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 41.523832] netlink_rcv_skb+0x53/0x100 [ 41.524157] netlink_unicast+0x23b/0x390 [ 41.524484] netlink_sendmsg+0x1f2/0x440 [ 41.524826] __sys_sendto+0x1d8/0x1f0 [ 41.525145] __x64_sys_sendto+0x1f/0x30 [ 41.525467] do_syscall_64+0xa5/0x1b0 [ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a [ 41.526213] RIP: 0033:0x7fbc4cfcea9a [ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a [ 41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005 [ 41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c [ 41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b [ 41.531573] </TASK> Fixes: 5c578aedcb21d ("IPv6: convert addrconf hash list to RCU") Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jiri Benc <jbenc@redhat.com> Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-01ipv6: annotate data-races around idev->cnf.ignore_routes_with_linkdownEric Dumazet1-1/+1
idev->cnf.ignore_routes_with_linkdown can be used without any locks, add appropriate annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-15net: ipv6/addrconf: introduce a regen_min_advance sysctlAlex Henrie1-2/+3
In RFC 8981, REGEN_ADVANCE cannot be less than 2 seconds, and the RFC does not permit the creation of temporary addresses with lifetimes shorter than that: > When processing a Router Advertisement with a > Prefix Information option carrying a prefix for the purposes of > address autoconfiguration (i.e., the A bit is set), the host MUST > perform the following steps: > 5. A temporary address is created only if this calculated preferred > lifetime is greater than REGEN_ADVANCE time units. However, some users want to change their IPv6 address as frequently as possible regardless of the RFC's arbitrary minimum lifetime. For the benefit of those users, add a regen_min_advance sysctl parameter that can be set to below or above 2 seconds. Link: https://datatracker.ietf.org/doc/html/rfc8981 Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-08net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIXMaciej Żenczykowski1-2/+10
Lorenzo points out that we effectively clear all unknown flags from PIO when copying them to userspace in the netlink RTM_NEWPREFIX notification. We could fix this one at a time as new flags are defined, or in one fell swoop - I choose the latter. We could either define 6 new reserved flags (reserved1..6) and handle them individually (and rename them as new flags are defined), or we could simply copy the entire unmodified byte over - I choose the latter. This unfortunately requires some anonymous union/struct magic, so we add a static assert on the struct size for a little extra safety. Cc: David Ahern <dsahern@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-17ipv6: constify inet6_mc_check()Eric Dumazet1-1/+1
inet6_mc_check() is essentially a read-only function. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptrZiyang Xuan1-0/+3
Change net device's MTU to smaller than IPV6_MIN_MTU or unregister device while matching route. That may trigger null-ptr-deref bug for ip6_ptr probability as following. ========================================================= BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134 Read of size 4 at addr 0000000000000308 by task ping6/263 CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14 Call trace: dump_backtrace+0x1a8/0x230 show_stack+0x20/0x70 dump_stack_lvl+0x68/0x84 print_report+0xc4/0x120 kasan_report+0x84/0x120 __asan_load4+0x94/0xd0 find_match.part.0+0x70/0x134 __find_rr_leaf+0x408/0x470 fib6_table_lookup+0x264/0x540 ip6_pol_route+0xf4/0x260 ip6_pol_route_output+0x58/0x70 fib6_rule_lookup+0x1a8/0x330 ip6_route_output_flags_noref+0xd8/0x1a0 ip6_route_output_flags+0x58/0x160 ip6_dst_lookup_tail+0x5b4/0x85c ip6_dst_lookup_flow+0x98/0x120 rawv6_sendmsg+0x49c/0xc70 inet_sendmsg+0x68/0x94 Reproducer as following: Firstly, prepare conditions: $ip netns add ns1 $ip netns add ns2 $ip link add veth1 type veth peer name veth2 $ip link set veth1 netns ns1 $ip link set veth2 netns ns2 $ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1 $ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2 $ip netns exec ns1 ifconfig veth1 up $ip netns exec ns2 ifconfig veth2 up $ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1 $ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1 Secondly, execute the following two commands in two ssh windows respectively: $ip netns exec ns1 sh $while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done $ip netns exec ns1 sh $while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly, then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check. cpu0 cpu1 fib6_table_lookup __find_rr_leaf addrconf_notify [ NETDEV_CHANGEMTU ] addrconf_ifdown RCU_INIT_POINTER(dev->ip6_ptr, NULL) find_match ip6_ignore_linkdown So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to fix the null-ptr-deref bug. Fixes: dcd1f572954f ("net/ipv6: Remove fib6_idev") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-19net: Add new protocol attribute to IP addressesJacques de Laval1-0/+2
This patch adds a new protocol attribute to IPv4 and IPv6 addresses. Inspiration was taken from the protocol attribute of routes. User space applications like iproute2 can set/get the protocol with the Netlink API. The attribute is stored as an 8-bit unsigned integer. The protocol attribute is set by kernel for these categories: - IPv4 and IPv6 loopback addresses - IPv6 addresses generated from router announcements - IPv6 link local addresses User space may pass custom protocols, not defined by the kernel. Grouping addresses on their origin is useful in scenarios where you want to distinguish between addresses based on who added them, e.g. kernel vs. user space. Tagging addresses with a string label is an existing feature that could be used as a solution. Unfortunately the max length of a label is 15 characters, and for compatibility reasons the label must be prefixed with the name of the device followed by a colon. Since device names also have a max length of 15 characters, only -1 characters is guaranteed to be available for any origin tag, which is not that much. A reference implementation of user space setting and getting protocols is available for iproute2: https://github.com/westermo/iproute2/commit/9a6ea18bd79f47f293e5edc7780f315ea42ff540 Signed-off-by: Jacques de Laval <Jacques.De.Laval@westermo.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220217150202.80802-1-Jacques.De.Laval@westermo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-14ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()Ignat Korchagin1-2/+0
Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock") switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe version. That was OK, because idev->lock was held for these codepaths. In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were removed, so we probably need to restore the original rcu-safe call. Otherwise, we occasionally get a machine crashed/stalled with the following in dmesg: [ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI [ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G O 5.15.19-cloudflare-2022.2.1 #1 [ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV [ 3406.009552][T230589] Workqueue: mld mld_ifc_work [ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60 [ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b [ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202 [ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040 [ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008 [ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000 [ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100 [ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000 [ 3406.125730][T230589] FS: 0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000 [ 3406.138992][T230589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0 [ 3406.162421][T230589] Call Trace: [ 3406.170235][T230589] <TASK> [ 3406.177736][T230589] mld_newpack+0xfe/0x1a0 [ 3406.186686][T230589] add_grhead+0x87/0xa0 [ 3406.195498][T230589] add_grec+0x485/0x4e0 [ 3406.204310][T230589] ? newidle_balance+0x126/0x3f0 [ 3406.214024][T230589] mld_ifc_work+0x15d/0x450 [ 3406.223279][T230589] process_one_work+0x1e6/0x380 [ 3406.232982][T230589] worker_thread+0x50/0x3a0 [ 3406.242371][T230589] ? rescuer_thread+0x360/0x360 [ 3406.252175][T230589] kthread+0x127/0x150 [ 3406.261197][T230589] ? set_kthread_struct+0x40/0x40 [ 3406.271287][T230589] ret_from_fork+0x22/0x30 [ 3406.280812][T230589] </TASK> [ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders] [ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]--- Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") Reported-by: David Pinilla Caparros <dpini@cloudflare.com> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27Revert "ipv6: Honor all IPv6 PIO Valid Lifetime values"Guillaume Nault1-0/+2
This reverts commit b75326c201242de9495ff98e5d5cff41d7fc0d9d. This commit breaks Linux compatibility with USGv6 tests. The RFC this commit was based on is actually an expired draft: no published RFC currently allows the new behaviour it introduced. Without full IETF endorsement, the flash renumbering scenario this patch was supposed to enable is never going to work, as other IPv6 equipements on the same LAN will keep the 2 hours limit. Fixes: b75326c20124 ("ipv6: Honor all IPv6 PIO Valid Lifetime values") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-28net: bridge: mcast: fix broken length + header check for MRDv6 Adv.Linus Lüssing1-1/+0
The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19ipv6: some fixes for ipv6_dev_find()Xin Long1-1/+2
This patch is to do 3 things for ipv6_dev_find(): As David A. noticed, - rt6_lookup() is not really needed. Different from __ip_dev_find(), ipv6_dev_find() doesn't have a compatibility problem, so remove it. As Hideaki suggested, - "valid" (non-tentative) check for the address is also needed. ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will traverse the address hash list, but it's heavy to be called inside ipv6_dev_find(). This patch is to reuse the code of ipv6_chk_addr_and_flags() for ipv6_dev_find(). - dev parameter is passed into ipv6_dev_find(), as link-local addresses from user space has sin6_scope_id set and the dev lookup needs it. Fixes: 81f6cb31222d ("ipv6: add ipv6_dev_find()") Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-05ipv6: add ipv6_dev_find()Xin Long1-0/+2
This is to add an ip_dev_find like function for ipv6, used to find the dev by saddr. It will be used by TIPC protocol. So also export it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31ipv6: fix memory leaks on IPV6_ADDRFORM pathCong Wang1-0/+1
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket to IPv4, particularly struct ipv6_ac_socklist. Similar to struct ipv6_mc_socklist, we should just close it on this path. This bug can be easily reproduced with the following C program: #include <stdio.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <arpa/inet.h> int main() { int s, value; struct sockaddr_in6 addr; struct ipv6_mreq m6; s = socket(AF_INET6, SOCK_DGRAM, 0); addr.sin6_family = AF_INET6; addr.sin6_port = htons(5000); inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr); connect(s, (struct sockaddr *)&addr, sizeof(addr)); inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr); m6.ipv6mr_interface = 5; setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6)); value = AF_INET; setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value)); close(s); return 0; } Reported-by: ch3332xr@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23ipv6: Honor all IPv6 PIO Valid Lifetime valuesFernando Gont1-2/+0
RFC4862 5.5.3 e) prevents received Router Advertisements from reducing the Valid Lifetime of configured addresses to less than two hours, thus preventing hosts from reacting to the information provided by a router that has positive knowledge that a prefix has become invalid. This patch makes hosts honor all Valid Lifetime values, as per draft-gont-6man-slaac-renum-06, Section 4.2. This is meant to help mitigate the problem discussed in draft-ietf-v6ops-slaac-renum. Note: Attacks aiming at disabling an advertised prefix via a Valid Lifetime of 0 are not really more harmful than other attacks that can be performed via forged RA messages, such as those aiming at completely disabling a next-hop router via an RA that advertises a Router Lifetime of 0, or performing a Denial of Service (DoS) attack by advertising illegitimate prefixes via forged PIOs. In scenarios where RA-based attacks are of concern, proper mitigations such as RA-Guard [RFC6105] [RFC7113] should be implemented. Signed-off-by: Fernando Gont <fgont@si6networks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30addrconf: add functionality to check on rpl requirementsAlexander Aring1-0/+3
This patch adds a functionality to addrconf to check on a specific RPL address configuration. According to RFC 6554: To detect loops in the SRH, a router MUST determine if the SRH includes multiple addresses assigned to any interface on that router. If such addresses appear more than once and are separated by at least one address not assigned to that router. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17ipv6: Annotate ipv6_addr_is_* bitwise pointer castsSven Eckelmann1-4/+4
The sparse commit 6002ded74587 ("add a flag to warn on casts to/from bitwise pointers") introduced a check for non-direct casts from/to restricted datatypes (when -Wbitwise-pointer is enabled). This triggered a warning in the 64 bit optimized ipv6_addr_is_*() functions because sparse doesn't know that the buffer already points to some data in the correct bitwise integer format. But these were correct and can therefore be marked with __force to signalize sparse an intended cast to a specific bitwise type. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07ipv6: Make ipv6_mc_may_pull() return bool.David S. Miller1-3/+3
Consistent with how pskb_may_pull() also now does so. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20ipv6: Fix return value of ipv6_mc_may_pull() for malformed packetsStefano Brivio1-1/+1
Commit ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls") replaces direct calls to pskb_may_pull() in br_ipv6_multicast_mld2_report() with calls to ipv6_mc_may_pull(), that returns -EINVAL on buffers too short to be valid IPv6 packets, while maintaining the previous handling of the return code. This leads to the direct opposite of the intended effect: if the packet is malformed, -EINVAL evaluates as true, and we'll happily proceed with the processing. Return 0 if the packet is too short, in the same way as this was fixed for IPv4 by commit 083b78a9ed64 ("ip: fix ip_mc_may_pull() return value"). I don't have a reproducer for this, unlike the one referred to by the IPv4 commit, but this is clearly broken. Fixes: ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12vrf: Increment Icmp6InMsgs on the original netdevStephen Suryaputra1-0/+16
Get the ingress interface and increment ICMP counters based on that instead of skb->dev when the the dev is a VRF device. This is a follow up on the following message: https://www.spinics.net/lists/netdev/msg560268.html v2: Avoid changing skb->dev since it has unintended effect for local delivery (David Ahern). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Move ipv6 stubs to a separate header fileDavid Ahern1-47/+0
The number of stubs is growing and has nothing to do with addrconf. Move the definition of the stubs to a separate header file and update users. In the move, drop the vxlan specific comment before ipv6_stub. Code move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Refactor fib6_ignore_linkdownDavid Ahern1-0/+8
fib6_ignore_linkdown takes a fib6_info but only looks at the net_device and its IPv6 config. Change it to take a net_device over a fib6_info as its input argument. In addition, move it to a header file to make the check inline and usable later with IPv4 code without going through the ipv6 stub, and rename to ip6_ignore_linkdown since it is only checking the setting based on the ipv6 struct on a device. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14ipv6_stub: add ipv6_route_input stub/proxy.Peter Oskolkov1-0/+1
Proxy ip6_route_input via ipv6_stub, for later use by lwt bpf ip encap (see the next patch in the patchset). Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-23bridge: Snoop Multicast Router AdvertisementsLinus Lüssing1-0/+15
When multiple multicast routers are present in a broadcast domain then only one of them will be detectable via IGMP/MLD query snooping. The multicast router with the lowest IP address will become the selected and active querier while all other multicast routers will then refrain from sending queries. To detect such rather silent multicast routers, too, RFC4286 ("Multicast Router Discovery") provides a standardized protocol to detect multicast routers for multicast snooping switches. This patch implements the necessary MRD Advertisement message parsing and after successful processing adds such routers to the internal multicast router list. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() callsLinus Lüssing1-1/+11
This patch refactors ip_mc_check_igmp(), ipv6_mc_check_mld() and their callers (more precisely, the Linux bridge) to not rely on the skb_trimmed parameter anymore. An skb with its tail trimmed to the IP packet length was initially introduced for the following three reasons: 1) To be able to verify the ICMPv6 checksum. 2) To be able to distinguish the version of an IGMP or MLD query. They are distinguishable only by their size. 3) To avoid parsing data for an IGMPv3 or MLDv2 report that is beyond the IP packet but still within the skb. The first case still uses a cloned and potentially trimmed skb to verfiy. However, there is no need to propagate it to the caller. For the second and third case explicit IP packet length checks were added. This hopefully makes ip_mc_check_igmp() and ipv6_mc_check_mld() easier to read and verfiy, as well as easier to use. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03net/ipv6: Add anycast addresses to a global hashtableJeff Barnhill1-0/+2
icmp6_send() function is expensive on systems with a large number of interfaces. Every time it’s called, it has to verify that the source address does not correspond to an existing anycast address by looping through every device and every anycast address on the device. This can result in significant delays for a CPU when there are a large number of neighbors and ND timers are frequently timing out and calling neigh_invalidate(). Add anycast addresses to a global hashtable to allow quick searching for matching anycast addresses. This is based on inet6_addr_lst in addrconf.c. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16bpf: Allow sk_lookup with IPv6 moduleJoe Stringer1-0/+5
This is a more complete fix than d71019b54bff ("net: core: Fix build with CONFIG_IPV6=m"), so that IPv6 sockets may be looked up if the IPv6 module is loaded (not just if it's compiled in). Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-11bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORTMartin KaFai Lau1-0/+1
This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-29net/ipv6: Add support for specifying metric of connected routesDavid Ahern1-0/+1
Add support for IFA_RT_PRIORITY to ipv6 addresses. If the metric is changed on an existing address then the new route is inserted before removing the old one. Since the metric is one of the route keys, the prefix route can not be atomically replaced. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Convert ipv6_add_addr to struct ifa6_configDavid Ahern1-0/+12
Move config parameters for adding an ipv6 address to a struct. struct names stem from inet6_rtm_newaddr which is the modern handler for adding an address. Start the conversion to ifa6_config with ipv6_add_addr. This is an argument move only; no functional change intended. Mapping of variable changes: addr --> cfg->pfx peer_addr --> cfg->peer_pfx pfxlen --> cfg->plen flags --> cfg->ifa_flags scope, valid_lft, prefered_lft have the same names within cfg (with corrected spelling). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22net/ipv6: Add helper to return path MTU based on fib resultDavid Ahern1-0/+2
Determine path MTU from a FIB lookup result. Logic is based on ip6_dst_mtu_forward plus lookup of nexthop exception. Add ip6_dst_mtu_forward to ipv6_stubs to handle access by core bpf code. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11net/ipv6: Add fib lookup stubs for use in bpf helperDavid Ahern1-0/+14
Add stubs to retrieve a handle to an IPv6 FIB table, fib6_get_table, a stub to do a lookup in a specific table, fib6_table_lookup, and a stub for a full route lookup. The stubs are needed for core bpf code to handle the case when the IPv6 module is not builtin. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-17ipv6: Count interface receive statistics on the ingress netdevStephen Suryaputra1-0/+14
The statistics such as InHdrErrors should be counted on the ingress netdev rather than on the dev from the dst, which is the egress. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31bpf: Hooks for sys_connectAndrey Ignatov1-0/+7
== The problem == See description of the problem in the initial patch of this patch set. == The solution == The patch provides much more reliable in-kernel solution for the 2nd part of the problem: making outgoing connecttion from desired IP. It adds new attach types `BPF_CGROUP_INET4_CONNECT` and `BPF_CGROUP_INET6_CONNECT` for program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that can be used to override both source and destination of a connection at connect(2) time. Local end of connection can be bound to desired IP using newly introduced BPF-helper `bpf_bind()`. It allows to bind to only IP though, and doesn't support binding to port, i.e. leverages `IP_BIND_ADDRESS_NO_PORT` socket option. There are two reasons for this: * looking for a free port is expensive and can affect performance significantly; * there is no use-case for port. As for remote end (`struct sockaddr *` passed by user), both parts of it can be overridden, remote IP and remote port. It's useful if an application inside cgroup wants to connect to another application inside same cgroup or to itself, but knows nothing about IP assigned to the cgroup. Support is added for IPv4 and IPv6, for TCP and UDP. IPv4 and IPv6 have separate attach types for same reason as sys_bind hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. == Implementation notes == The patch introduces new field in `struct proto`: `pre_connect` that is a pointer to a function with same signature as `connect` but is called before it. The reason is in some cases BPF hooks should be called way before control is passed to `sk->sk_prot->connect`. Specifically `inet_dgram_connect` autobinds socket before calling `sk->sk_prot->connect` and there is no way to call `bpf_bind()` from hooks from e.g. `ip4_datagram_connect` or `ip6_datagram_connect` since it'd cause double-bind. On the other hand `proto.pre_connect` provides a flexible way to add BPF hooks for connect only for necessary `proto` and call them at desired time before `connect`. Since `bpf_bind()` is allowed to bind only to IP and autobind in `inet_dgram_connect` binds only port there is no chance of double-bind. bpf_bind() sets `force_bind_address_no_port` to bind to only IP despite of value of `bind_address_no_port` socket field. bpf_bind() sets `with_lock` to `false` when calling to __inet_bind() and __inet6_bind() since all call-sites, where bpf_bind() is called, already hold socket lock. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-16net/ipv6: Change address check to always take a device argumentDavid Ahern1-2/+2
ipv6_chk_addr_and_flags determines if an address is a local address and optionally if it is an address on a specific device. For example, it is called by ip6_route_info_create to determine if a given gateway address is a local address. The address check currently does not consider L3 domains and as a result does not allow a route to be added in one VRF if the nexthop points to an address in a second VRF. e.g., $ ip route add 2001:db8:1::/64 vrf r2 via 2001:db8:102::23 Error: Invalid gateway address. where 2001:db8:102::23 is an address on an interface in vrf r1. ipv6_chk_addr_and_flags needs to allow callers to always pass in a device with a separate argument to not limit the address to the specific device. The device is used used to determine the L3 domain of interest. To that end add an argument to skip the device check and update callers to always pass a device where possible and use the new argument to mean any address in the domain. Update a handful of users of ipv6_chk_addr with a NULL dev argument. This patch handles the change to these callers without adding the domain check. ip6_validate_gw needs to handle 2 cases - one where the device is given as part of the nexthop spec and the other where the device is resolved. There is at least 1 VRF case where deferring the check to only after the route lookup has resolved the device fails with an unintuitive error "RTNETLINK answers: No route to host" as opposed to the preferred "Error: Gateway can not be a local address." The 'no route to host' error is because of the fallback to a full lookup. The check is done twice to avoid this error. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04rtnetlink: ipv6: convert remaining users to rtnl_register_moduleFlorian Westphal1-1/+1
convert remaining users of rtnl_register to rtnl_register_module and un-export rtnl_register. Requested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05ipv6: remove IN6_ADDR_HSIZE from addrconf.hEric Dumazet1-3/+0
IN6_ADDR_HSIZE is private to addrconf.c, move it here to avoid confusion. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01net: display hw address of source machine during ipv6 DAD failureVishwanath Pai1-1/+1
This patch updates the error messages displayed in kernel log to include hwaddress of the source machine that caused ipv6 duplicate address detection failures. Examples: a) When we receive a NA packet from another machine advertising our address: ICMPv6: NA: 34:ab:cd:56:11:e8 advertised our address 2001:db8:: on eth0! b) When we detect DAD failure during address assignment to an interface: IPv6: eth0: IPv6 duplicate address 2001:db8:: used by 34:ab:cd:56:11:e8 detected! v2: Changed %pI6 to %pI6c in ndisc_recv_na() Chaged the v6 address in the commit message to 2001:db8:: Suggested-by: Igor Lubashev <ilubashe@akamai.com> Signed-off-by: Vishwanath Pai <vpai@akamai.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-24ipv6: addrconf: add per netns perturbation in inet6_addr_hash()Eric Dumazet1-1/+1
Bring IPv6 in par with IPv4 : - Use net_hash_mix() to spread addresses a bit more. - Use 256 slots hash table instead of 16 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20net: Add extack to validator_info structs used for address notifierDavid Ahern1-0/+1
Add extack to in_validator_info and in6_validator_info. Update the one user of each, ipvlan, to return an error message for failures. Only manual configuration of an address is plumbed in the IPv6 code path. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18net: Convert int functions to boolJoe Perches1-2/+2
Global function ipv6_rcv_saddr_equal and static functions ipv6_rcv_saddr_equal and ipv4_rcv_saddr_equal currently return int. bool is slightly more descriptive for these functions so change their return type from int to bool. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16ipv6: fix NULL dereference in ip6_route_dev_notify()Eric Dumazet1-0/+10
Based on a syzkaller report [1], I found that a per cpu allocation failure in snmp6_alloc_dev() would then lead to NULL dereference in ip6_route_dev_notify(). It seems this is a very old bug, thus no Fixes tag in this submission. Let's add in6_dev_put_clear() helper, as we will probably use it elsewhere (once available/present in net-next) [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff88019f456680 task.stack: ffff8801c6e58000 RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202 RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000 RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001 RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37 R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8 FS: 00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 in6_dev_put include/net/addrconf.h:335 [inline] ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678 call_netdevice_notifiers net/core/dev.c:1694 [inline] rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587 register_netdev+0x1a/0x30 net/core/dev.c:7669 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214 ops_init+0x10a/0x570 net/core/net_namespace.c:118 setup_net+0x313/0x710 net/core/net_namespace.c:294 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206 SYSC_unshare kernel/fork.c:2347 [inline] SyS_unshare+0x653/0xfa0 kernel/fork.c:2297 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512c9 RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3 f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6 0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP: ffff8801c6e5f1b0 RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP: ffff8801c6e5f1b0 RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: ffff8801c6e5f1b0 ---[ end trace e441d046c6410d31 ]--- Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04net, ipv6: convert inet6_ifaddr.refcnt from atomic_t to refcount_tReshetova, Elena1-3/+3
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04net, ipv6: convert inet6_dev.refcnt from atomic_t to refcount_tReshetova, Elena1-4/+4
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09Ipvlan should return an error when an address is already in use.Krister Johansen1-1/+9
The ipvlan code already knows how to detect when a duplicate address is about to be assigned to an ipvlan device. However, that failure is not propogated outward and leads to a silent failure. Introduce a validation step at ip address creation time and allow device drivers to register to validate the incoming ip addresses. The ipvlan code is the first consumer. If it detects an address in use, we can return an error to the user before beginning to commit the new ifa in the networking code. This can be especially useful if it is necessary to provision many ipvlans in containers. The provisioning software (or operator) can use this to detect situations where an ip address is unexpectedly in use. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notfWANG Cong1-0/+2
For each netns (except init_net), we initialize its null entry in 3 places: 1) The template itself, as we use kmemdup() 2) Code around dst_init_metrics() in ip6_route_net_init() 3) ip6_route_dev_notify(), which is supposed to initialize it after loopback registers Unfortunately the last one still happens in a wrong order because we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to net->loopback_dev's idev, thus we have to do that after we add idev to loopback. However, this notifier has priority == 0 same as ipv6_dev_notf, and ipv6_dev_notf is registered after ip6_route_dev_notifier so it is called actually after ip6_route_dev_notifier. This is similar to commit 2f460933f58e ("ipv6: initialize route null entry in addrconf_init()") which fixes init_net. Fix it by picking a smaller priority for ip6_route_dev_notifier. Also, we have to release the refcnt accordingly when unregistering loopback_dev because device exit functions are called before subsys exit functions. Acked-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 01:35:14 +0300