| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The i.MX95 System manager exports SCMI LMM protocol for linux to manage
Logical Machines. The driver is to use the LMM Protocol interface to
boot, shutdown a LM.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-5-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Merge series from James Calligeros <jcalligeros99@gmail.com>:
This series introduces a number of changes to the drivers for
the Texas Instruments TAS2764 and TAS2770 amplifiers in order to
introduce (and improve in the case of TAS2770) support for the
variants of these amps found in Apple Silicon Macs.
Apple's variant of TAS2764 is known as SN012776, and as always with
Apple is a subtly incompatible variant with a number of quirks. It
is not publicly available. The TAS2770 variant is known as TAS5770L,
and does not require incompatible handling.
Much as with the Cirrus codec patches, I do not
expect that we will get any official acknowledgement that these parts
exist from TI, however I would be delighted to be proven wrong.
This series has been living in the downstream Asahi kernel tree[1]
for over two years, and has been tested by many thousands of users
by this point[2].
v4 drops the TDM idle TX slot behaviour patches. I experimented with
the API discussed in v3, however this did not work on any of the machines
I tested it with. More tweaking is probably needed.
[1] https://github.com/AsahiLinux/linux/tree/asahi-wip
[2] https://stats.asahilinux.org/
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series fixes the KConfig for cs_dsp and cs-amp-lib tests so that
CONFIG_KUNIT_ALL_TESTS doesn't cause them to add modules to the build.
|
|
This protocol allows an agent to start, stop a CPU or set reset vector. It
is used to manage auxiliary CPUs in an LM (e.g. additional cores in an AP
cluster).
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-4-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add Logical Machine Management(LMM) protocol which is intended for boot,
shutdown, and reset of other logical machines (LM). It is usually used to
allow one LM to manager another used as an offload or accelerator engine.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-3-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Turn thread.fpu into a pointer. Since most FPU code internals work by passing
around the FPU pointer already, the code generation impact is small.
This allows us to remove the old kludge of task_struct being variable size:
struct task_struct {
...
/*
* New fields for task_struct should be added above here, so that
* they are included in the randomized portion of task_struct.
*/
randomized_struct_fields_end
/* CPU-specific state of this task: */
struct thread_struct thread;
/*
* WARNING: on x86, 'thread_struct' contains a variable-sized
* structure. It *MUST* be at the end of 'task_struct'.
*
* Do not put anything below here!
*/
};
... which creates a number of problems, such as requiring thread_struct to be
the last member of the struct - not allowing it to be struct-randomized, etc.
But the primary motivation is to allow the decoupling of task_struct from
hardware details (<asm/processor.h> in particular), and to eventually allow
the per-task infrastructure:
DECLARE_PER_TASK(type, name);
...
per_task(current, name) = val;
... which requires task_struct to be a constant size struct.
The fpu_thread_struct_whitelist() quirk to hardened usercopy can be removed,
now that the FPU structure is not embedded in the task struct anymore, which
reduces text footprint a bit.
Fixed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-4-mingo@kernel.org
|
|
dev_get_drvdata()'s parameter is a const pointer, so the chip passed to
pwmchip_get_drvdata() can be const, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250403151134.266388-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.16-rc1:
UAPI Changes:
- Add ASAHI uapi header!
- Add apple fourcc modifiers.
- Add capset virtio definitions to UAPI.
- Extend EXPORT_SYNC_FILE for timeline syncobjs.
Cross-subsystem Changes:
- Adjust DMA-BUF sg handling to not cache map on attach.
- Update drm/ci, hlcdc, virtio, maintainers.
- Update fbdev todo.
- Allow setting dma-device for dma-buf import.
- Export efi_mem_desc_lookup to make efidrm build as a module.
Core Changes:
- Update drm scheduler docs.
- Use the correct resv object in TTM delayed destroy.
- Fix compiler warning with panic qr code, and other small fixes.
- drm/ci updates.
- Add debugfs file for listing all bridges.
- Small fixes to drm/client, ttm tests.
- Add documentation to display/hdmi.
- Add kunit tests for bridges.
- Dont fail managed device probing if connector polling fails.
- Create Kconfig.debug for drm core.
- Add tests for the drm scheduler.
- Add and use new access helpers for DPCPD.
- Add generic and optimized conversions for format-helper.
- Begin refcounting panel for improving lifetime handling.
- Unify simpledrm and ofdrm sysfb, and add extra features.
- Split hdmi audio in bridge to make DP audio work.
Driver Changes:
- Convert drivers to use devm_platform_ioremap_resource().
- Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4,
vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm,
bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu,
bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas,
imagination, various panels.
- Allow attaching more display to vkms.
- Add Powertip PH128800T004-ZZA01 panel.
- Add rotation quirk for ZOTAC panel.
- Convert bridge/tc358775 to atomic.
- Remove deprecated panel calls from synaptics, novatek, samsung panels.
- Refactor shmem helper page pinning and accel drivers using it.
- Add dmabuf support to accel/amdxdna.
- Use 4k page table format for panfrost/mediatek.
- Add common powerup/down dp link helper and use it.
- Assorted compiler warning fixes.
- Support dma-buf import for renesas
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# include/drm/drm_kunit_helpers.h
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
|
|
nfs.ko, nfsd.ko, and lockd.ko all use crc32_le(), which is available
only when CONFIG_CRC32 is enabled. But the only NFS kconfig option that
selected CONFIG_CRC32 was CONFIG_NFS_DEBUG, which is client-specific and
did not actually guard the use of crc32_le() even on the client.
The code worked around this bug by only actually calling crc32_le() when
CONFIG_CRC32 is built-in, instead hard-coding '0' in other cases. This
avoided randconfig build errors, and in real kernels the fallback code
was unlikely to be reached since CONFIG_CRC32 is 'default y'. But, this
really needs to just be done properly, especially now that I'm planning
to update CONFIG_CRC32 to not be 'default y'.
Therefore, make CONFIG_NFS_FS, CONFIG_NFSD, and CONFIG_LOCKD select
CONFIG_CRC32. Then remove the fallback code that becomes unnecessary,
as well as the selection of CONFIG_CRC32 from CONFIG_NFS_DEBUG.
Fixes: 1264a2f053a3 ("NFS: refactor code for calculating the crc32 hash of a filehandle")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce support for protocol drivers to specify whether a transfer
should use single or dual transfer mode. Currently, the SPI controller
cannot determine this information from the user, leading to potential
limitations in transfer capabilities.
Add a new field `dtr_mode` in the `spi_transfer` structure. The `dtr_mode`
field allows protocol drivers to indicate if Double Transfer Rate (DTR)
mode is supported for a given transfer. When `dtr_mode` is set to true,
the SPI controller will use DTR mode; otherwise, it will default to single
transfer mode.
Introduce another field `dtr_caps` to indicate if the QSPI controller is
capable of supporting DTR mode (SDR and DDR). By default, both `dtr_caps`
and `dtr_mode` will be false. These flags manage the QSPI controller's DTR
mode capabilities within the SPI framework.
The QSPI controller driver uses these flags to configure single or double
transfer rates using the controller register.
The existing spi-mem driver helps configure the DTR mode but is limited to
memory devices. There is no support available to set DTR mode for non-memory
devices, e.g., touch or any generic SPI sensor. This change is backward
compatible and doesn't break existing SPI or QSPI drivers.
Changes include:
- Addition of `dtr_mode` and `dtr_caps` fields in the `spi_transfer`
structure.
- Documentation updates to reflect the new `dtr_mode` and `dtr_caps` fields.
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://patch.msgid.link/20250404135427.313825-1-quic_msavaliy@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DCCP was orphaned in 2021 by commit 054c4610bd05 ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.
In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot. Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.
Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46d4 ("dccp: Print deprecation notice.").
Since then, only one individual has contacted the netdev mailing list. [0]
There is ongoing research for Multipath DCCP. The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community. While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:
"This is not Open Source software."
The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.
Maintaining DCCP for a decade without any real users has become a burden.
Therefore, it's time to remove it.
Removing DCCP will also provide significant benefits to TCP. It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.
Note that we keep DCCP netfilter modules as requested. [3]
Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We got a late smatch warning and some additional review feedback.
smatch warnings:
mm/memory.c:1428 copy_page_range() error: uninitialized symbol 'pfn'.
We actually use the pfn only when it is properly initialized; however, we
may pass an uninitialized value to a function -- although it will not use
it that likely still is UB in C.
So let's just fix it by always initializing pfn in the caller of
track_pfn_copy(), and improving the documentation of track_pfn_copy().
While at it, clarify the doc of untrack_pfn_copy(), that internal checks
make sure if we actually have to untrack anything.
Link: https://lkml.kernel.org/r/20250408085950.976103-1-david@redhat.com
Fixes: dc84bc2aba85 ("x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202503270941.IFILyNCX-lkp@intel.com/
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Partially revert commit 0aaddfb06882 ("locking/local_lock: Introduce
localtry_lock_t"). Remove localtry_*() helpers, since localtry_lock()
name might be misinterpreted as "try lock".
Introduce local_trylock[_irqsave]() helpers that only work with newly
introduced local_trylock_t type. Note that attempt to use
local_trylock[_irqsave]() with local_lock_t will cause compilation
failure.
Usage and behavior in !PREEMPT_RT:
local_lock_t lock; // sizeof(lock) == 0
local_lock(&lock); // preempt disable
local_lock_irqsave(&lock, ...); // irq save
if (local_trylock_irqsave(&lock, ...)) // compilation error
local_trylock_t lock; // sizeof(lock) == 4
local_lock(&lock); // preempt disable, acquired = 1
local_lock_irqsave(&lock, ...); // irq save, acquired = 1
if (local_trylock(&lock)) // if (!acquired) preempt disable, acquired = 1
if (local_trylock_irqsave(&lock, ...)) // if (!acquired) irq save, acquired = 1
The existing local_lock_*() macros can be used either with local_lock_t or
local_trylock_t. With local_trylock_t they set acquired = 1 while
local_unlock_*() clears it.
In !PREEMPT_RT local_lock_irqsave(local_lock_t *) disables interrupts to
protect critical section, but it doesn't prevent NMI, so the fully
reentrant code cannot use local_lock_irqsave(local_lock_t *) for exclusive
access.
The local_lock_irqsave(local_trylock_t *) helper disables interrupts and
sets acquired=1, so local_trylock_irqsave(local_trylock_t *) from NMI
attempting to acquire the same lock will return false.
In PREEMPT_RT local_lock_irqsave() maps to preemptible spin_lock(). Map
local_trylock_irqsave() to preemptible spin_trylock(). When in hard IRQ
or NMI return false right away, since spin_trylock() is not safe due to
explicit locking in the underneath rt_spin_trylock() implementation.
Removing this explicit locking and attempting only "trylock" is undesired
due to PI implications.
The local_trylock() without _irqsave can be used to avoid the cost of
disabling/enabling interrupts by only disabling preemption, so
local_trylock() in an interrupt attempting to acquire the same lock will
return false.
Note there is no need to use local_inc for acquired variable, since it's a
percpu variable with strict nesting scopes.
Note that guard(local_lock)(&lock) works only for "local_lock_t lock".
The patch also makes sure that local_lock_release(l) is called before
WRITE_ONCE(l->acquired, 0). Though IRQs are disabled at this point the
local_trylock() from NMI will succeed and local_lock_acquire(l) will warn.
Link: https://lkml.kernel.org/r/20250403025514.41186-1-alexei.starovoitov@gmail.com
Fixes: 0aaddfb06882 ("locking/local_lock: Introduce localtry_lock_t")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This provides ucs_recompose() to recompose two Unicode characters into
a single character if possible. This is needed for the VT to properly
display decomposed UTF8 sequences.
Note: scripts/checkpatch.pl complains about "... exceeds 100 columns".
Please ignore.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250410011839.64418-8-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This replaces ucs_width.c with the code generated by gen_ucs_width.py
providing comprehensive tables for double-width and zero-width Unicode
code points. Also make ucs_is_zero_width() effective.
Note: scripts/checkpatch.pl complains about "... exceeds 100 columns".
Please ignore.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250410011839.64418-6-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Zero-width Unicode code points are causing misalignment in vertically
aligned content, disrupting the visual layout. Let's handle zero-width
code points more intelligently.
Double-width code points are stored in the screen grid followed by a white
space code point to create the expected screen layout. When a double-width
code point is followed by a zero-width code point in the console incoming
bytestream (e.g., an emoji with a presentation selector) then we may
replace the white space padding by that zero-width code point instead of
dropping it. This maximize screen content information while preserving
proper layout.
If a zero-width code point is preceded by a single-width code point then
the above trick is not possible and such zero-width code point must
be dropped.
VS16 (Variation Selector 16, U+FE0F) is special as it doubles the width
of the preceding single-width code point. We handle that case by giving
VS16 a width of 1 when that happens.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250410011839.64418-4-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This will make it easier to maintain. Also make it depend on
CONFIG_CONSOLE_TRANSLATIONS.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250410011839.64418-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
API usb_(enable|disable)_autosuspend() have inconsistent prototypes
regarding if CONFIG_PM is defined.
Correct prototypes when the macro is undefined by referring to those
when the macro is defined.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250408-fix_usb_hdr-v1-1-e785c5b49481@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 9748cb2dc393 ("VFS: repack DENTRY_ flags.") changed the value of
DCACHE_MOUNTED, which broke drgn's path_lookup() helper. drgn is forced
to hard-code it because it's a macro, and macros aren't preserved in
debugging information by default.
Enums, on the other hand, are included in debugging information. Convert
the DCACHE_* flag macros to an enum so that debugging tools like drgn
and bpftrace can make use of them.
Link: https://github.com/osandov/drgn/blob/2027d0fea84d74b835e77392f7040c2a333180c6/drgn/helpers/linux/fs.py#L43-L46
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/177665a082f048cf536b9cd6af467b3be6b6e6ed.1744141838.git.osandov@fb.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Extend the HDMI configuration options to allow managing bits per color
channel. This is required by some PHY drivers such as
rockchip-samsung-hdptx.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-2-8cb1678e7663@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Allow HDMI PHYs to be configured through the generic
functions through a custom structure added to the generic union.
The parameters added here are based on HDMI PHY
implementation practices. The current set of parameters
should cover the potential users.
Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/d1cff6c03ec3732d2244022029245ab2d954d997.1734340233.git.Sandor.yu@nxp.com
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250318-phy-sam-hdptx-bpc-v6-1-8cb1678e7663@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add an USB jack type, in order to support notifying of a valid USB audio
device. Since USB audio devices can have a slew of different
configurations that reach beyond the basic headset and headphone use cases,
classify these devices differently.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-8-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the case of handling a USB bus reset, the xhci_discover_or_reset_device
can run without first notifying the xHCI sideband client driver to stop or
prevent the use of the transfer ring. It was seen that when a bus reset
situation happened, the USB offload driver was attempting to fetch the xHCI
transfer ring information, which was already freed.
Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-6-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some clients may operate only on a specific XHCI interrupter instance.
Allow for the associated class driver to request for the interrupter that
it requires.
Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-4-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce XHCI sideband, which manages the USB endpoints being requested by
a client driver. This is used for when client drivers are attempting to
offload USB endpoints to another entity for handling USB transfers. XHCI
sec intr will allow for drivers to fetch the required information about the
transfer ring, so the user can submit transfers independently. Expose the
required APIs for drivers to register and request for a USB endpoint and to
manage XHCI secondary interrupters.
Driver renaming, multiple ring segment page linking, proper endpoint clean
up, and allowing module compilation added by Wesley Cheng to complete
original concept code by Mathias Nyman.
Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-2-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The msg_data_left() function doesn't modify the struct msghdr parameter,
so mark it as const. This allows the function to be used with const
references, improving type safety and making the API more flexible.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250408-tcpsendmsg-v3-1-208b87064c28@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc2).
Conflict:
Documentation/networking/netdevices.rst
net/core/lock_debug.c
04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE")
03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip fixes from Ingo Molnar:
- Fix NULL pointer dereference crashes due to missing .chip_flags setup
in the sg2042-msi and irq-bcm2712-mip irqchip drivers
- Remove the davinci aintc irqchip driver's leftover header too
* tag 'irq-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm2712-mip: Set EOI/ACK flags in msi_parent_ops
irqchip/sg2042-msi: Add missing chip flags
irqchip/davinci: Remove leftover header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timer fixes from Ingo Molnar:
- Fix missing ACCESS_PRIVATE() that triggered a Sparse warning
- Fix lockdep false positive in tick_freeze() on CONFIG_PREEMPT_RT=y
- Avoid <vdso/unaligned.h> macro's variable shadowing to address build
warning that triggers under W=2 builds
* tag 'timers-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso: Address variable shadowing in macros
timekeeping: Add a lockdep override in tick_freeze()
hrtimer: Add missing ACCESS_PRIVATE() for hrtimer::function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Fix __free_event() corner case splat
- Fix false-positive uprobes related lockdep splat on
CONFIG_PREEMPT_RT=y kernels
- Fix a complicated perf sigtrap race that may result in hangs
* tag 'perf-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix hang while freeing sigtrap event
uprobes: Avoid false-positive lockdep splat on CONFIG_PREEMPT_RT=y in the ri_timer() uprobe timer callback, use raw_write_seqcount_*()
perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
|
|
Since 1c7f4fe86f17 ("powerpc/pci: Remove pcibios_setup_bus_devices()")
there's no architecture left setting pci_fixup_cardbus. Therefore remove
support from PCI core.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/8de7da4c-2b16-4ee1-8c42-0d04f3c821c6@gmail.com
|
|
Add helpers for the SVSM_VTPM_CMD calls used by the vTPM protocol defined by
the AMD SVSM spec [1].
The vTPM protocol follows the Official TPM 2.0 Reference Implementation
(originally by Microsoft, now part of the TCG) simulator protocol.
[1] "Secure VM Service Module for SEV-SNP Guests"
Publication # 58019 Revision: 1.00
Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Co-developed-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250403100943.120738-3-sgarzare@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix resource handling in gpio-tegra186
- fix wakeup source leaks in gpio-mpc8xxx and gpio-zynq
- fix minor issues with some GPIO OF quirks
- deprecate GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge()
symbols and add a TODO task to track replacing them with a better
solution
* tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: Move Atmel HSMCI quirk up out of the regulator comment
gpiolib: of: Fix the choice for Ingenic NAND quirk
gpio: zynq: Fix wakeup source leaks on device unbind
gpio: mpc8xxx: Fix wakeup source leaks on device unbind
gpio: TODO: track the removal of regulator-related workarounds
MAINTAINERS: add more keywords for the GPIO subsystem entry
gpio: deprecate devm_gpiod_unhinge()
gpio: deprecate the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag
gpio: tegra186: fix resource handling in ACPI probe path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Two important fixes: the build of the SPI NAND layer with old GCC
versions as well as the fix of the Qpic Makefile which was wrong in
the first place.
There are also two smaller fixes about a missing error and status
check"
* tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: Fix build with gcc < 7.5
mtd: rawnand: Add status chack in r852_ready()
mtd: inftlcore: Add error check for inftl_read_oob()
mtd: nand: Drop explicit test for built-in CONFIG_SPI_QPIC_SNAND
|
|
Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version
from the dummy XM header data in cs_dsp_bin_err_test_common_init().
Make the same change to cs_dsp_bin_test_common_init() and remove the
cs_dsp_mock_xm_header_get_fw_version_from_regmap() function.
The code in cs_dsp_test_bin.c was correctly calling
cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version
from a dummy header it wrote to XM registers. However in
cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it
populates it the normal way using a wmfw file. It should have called
cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob
buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap().
As nothing had been written to the registers this returned the value of
uninitialized data.
The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap()
was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a
blob buffer containing the dummy XM header so it can use
cs_dsp_mock_xm_header_get_fw_version() to read from that.
Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250410132129.1312541-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implement support for Exynos7870 USB DRD on top of the existing
exynos5-usbdrd driver.
Exynos7870 has a single USB 2.0 DRD PHY controller and no 3.0 PHYs. Thus,
it only supports the UTMI interface.
Moreover, the PMU register offset for enabling the PHY controller is
different for SoCs such as Exynos7870, where BIT(0) is for the 3.0 PHY and
BIT(1) is for the 2.0 PHY. The phy_isol function for Exynos7870 uses the
appropriate register offsets.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250410-exynos7870-usbphy-v2-3-2eb005987455@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A recent change has introduced a bug into cpufreq_get_policy(), but this
function is not used, so it's better to drop it altogether.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/2802770.mvXUDI8C0e@rjwysocki.net
|
|
The constants FB_EVENT_MODE_CHANGE and FB_EVENT_BLANK are unused.
Remove them from the header file.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-12-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove support for fb events from the led backlight trigger. Provide
the helper ledtrig_backlight_blank() instead. Call it from fbdev to
inform the trigger of changes to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of the fbdev
notifiers, maintain an internal list of led backlight triggers.
v3:
- export ledtrig_backlight_blank()
v2:
- maintain global list of led backlight triggers (Lee)
- avoid IS_REACHABLE() in source file (Lee)
- notify on changes to blank state instead of display state
- use lock guards
- initialize led list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove support for fb events from the lcd subsystem. Provide the
helper lcd_notify_blank_all() instead. In fbdev, call
lcd_notify_blank_all() to inform the lcd subsystem of changes
to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of fbdev
notifiers, maintain an internal list of lcd devices.
v3:
- export lcd_notify_mode_change_all() (kernel test robot)
v2:
- maintain global list of lcd devices
- avoid IS_REACHABLE() in source file
- use lock guards
- initialize lcd list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-9-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove support for fb events from backlight subsystem. Provide the
helper backlight_notify_blank_all() instead. Also export the existing
helper backlight_notify_blank() to update a single backlight device.
In fbdev, call either helper to inform the backlight subsystem of
changes to a display's blank state. If the framebuffer device has a
specific backlight, only update this one; otherwise update all.
v4:
- protect blacklight declarations with IS_REACHABLE() (kernel test robot)
v3:
- declare empty fb_bl_notify_blank() as static inline (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Look at the blank state provided by FB_EVENT_BLANK to determine
whether to enable or disable a backlight. Remove the tracking fields
from struct backlight_device.
Tracking requires three variables, fb_on, prev_fb_on and the
backlight's use_count. If fb_on is true, the display has been
unblanked. The backlight needs to be enabled if the display was
blanked before (i.e., prev_fb_on is false) or if use_count is still
at 0. If fb_on is false, the display has been blanked. In this case,
the backlight has to be disabled was unblanked before and the
backlight's use_count is greater than 0.
This change removes fbdev state tracking from blacklight. All the
backlight requires it its own use counter and information about
changes to the display. Removing fbdev internals makes backlight
drivers easier to integrate into other display drivers, such as DRM.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-5-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Store the display's blank status in struct fb_info.blank and track
it in fb_blank(). As an extra, the status is now available from the
sysfs blank attribute.
Support for blanking is optional. Therefore framebuffer_alloc()
initializes the state to FB_BLANK_UNBLANK (i.e., the display is
on). If the fb_blank callback has been set, register_framebuffer()
sets the state to FB_BLANK_POWERDOWN. On the first modeset, the
call to fb_blank() will update it to _UNBLANK. This is important,
as listeners to FB_EVENT_BLANK will now see the display being
switched on.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The new helper is introduced to allow counting the child firmware nodes
of their parent without requiring a device to be passed. This also makes
the fwnode and device property API more symmetrical with the rest.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20250310150835.3139322-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
kmap_local_page() can be unsafe to call from a panic handler, if
CONFIG_HIGHMEM is set, and the page is in the highmem zone.
So add kmap_local_page_try_from_panic() to handle this case.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250407140138.162383-2-jfalempe@redhat.com
|
|
txq_trans_update() currently uses txq->xmit_lock_owner
to conditionally update txq->trans_start.
For regular devices, txq->xmit_lock_owner is updated
from HARD_TX_LOCK() and HARD_TX_UNLOCK(), and this apparently
causes cpu stalls.
Using dev->lltx, which sits in a read-mostly cache-line,
and already used in HARD_TX_LOCK() and HARD_TX_UNLOCK()
helps cpu prediction.
On an AMD EPYC 7B12 dual socket server, tcp_rr with 128 threads
and 30,000 flows gets a 5 % increase in throughput.
As explained in commit 95ecba62e2fd ("net: fix races in
netdev_tx_sent_queue()/dev_watchdog()") I am planning
to no longer update txq->trans_start in the fast path
in a followup patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250408202742.2145516-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect xdp_features with netdev->lock. This way pure readers
no longer have to take rtnl_lock to access the field.
This includes calling NETDEV_XDP_FEAT_CHANGE under the lock.
Looks like that's fine for bonding, the only "real" listener,
it's the same as ethtool feature change.
In terms of normal drivers - only GVE need special consideration
(other drivers don't use instance lock or don't support XDP).
It calls xdp_set_features_flag() helper from gve_init_priv() which
in turn is called from gve_reset_recovery() (locked), or prior
to netdev registration. So switch to _locked.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250408195956.412733-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Read accesses go via xsk_get_pool_from_qid(), the call coming
from the core and gve look safe (other "ops locked" drivers
don't support XSK).
Write accesses go via xsk_reg_pool_at_qid() and xsk_clear_pool_at_qid().
Former is already under the ops lock, latter is not (both coming from
the workqueue via xp_clear_dev() and NETDEV_UNREGISTER via xsk_notifier()).
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_get_by_index_lock() performs following steps:
rcu_lock();
dev = lookup(netns, ifindex);
dev_get(dev);
rcu_unlock();
[... lock & validate the dev ...]
return dev
Validation right now only checks if the device is registered but since
the lookup is netns-aware we must also protect against the device
switching netns right after we dropped the RCU lock. Otherwise
the caller in netns1 may get a pointer to a device which has just
switched to netns2.
We can't hold the lock for the entire netns change process (because of
the NETDEV_UNREGISTER notifier), and there's no existing marking to
indicate that the netns is unlisted because of netns move, so add one.
AFAIU none of the existing netdev_get_by_index_lock() callers can
suffer from this problem (NAPI code double checks the netns membership
and other callers are either under rtnl_lock or not ns-sensitive),
so this patch does not have to be treated as a fix.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
