| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The read side of seqcount_latch consists of:
do {
seq = raw_read_seqcount_latch(&latch->seq);
...
} while (read_seqcount_latch_retry(&latch->seq, seq));
which is asymmetric in the raw_ department, and sure enough,
read_seqcount_latch_retry() includes (explicit) instrumentation where
raw_read_seqcount_latch() does not.
This inconsistency becomes a problem when trying to use it from
noinstr code. As such, fix it by renaming and re-implementing
raw_read_seqcount_latch_retry() without the instrumentation.
Specifically the instrumentation in question is kcsan_atomic_next(0)
in do___read_seqcount_retry(). Loosing this annotation is not a
problem because raw_read_seqcount_latch() does not pass through
kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.233598176@infradead.org
|
|
While modifying wait_task_inactive() for PREEMPT_RT; the build robot
noted that UP got broken. This led to audit and consideration of the
UP implementation of wait_task_inactive().
It looks like the UP implementation is also broken for PREEMPT;
consider task_current_syscall() getting preempted between the two
calls to wait_task_inactive().
Therefore move the wait_task_inactive() implementation out of
CONFIG_SMP and unconditionally use it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230602103731.GA630648%40hirez.programming.kicks-ass.net
|
|
early_lookup_bdev is now only used during the early boot code as it
should, so mark it __init to not waste run time memory on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Open code dm_get_dev_t in the only remaining caller, and propagate the
exact error code from lookup_bdev and early_lookup_bdev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_lookup_devt is only used by code in early-lookup.c, so move it
there.
printk_all_partitions and it's helper bdevt_str are only used by the
early init code in init/do_mounts.c, so they should go there as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
name_to_dev_t has a very misleading name, that doesn't make clear
it should only be used by the early init code, and also has a bad
calling convention that doesn't allow returning different kinds of
errors. Rename it to early_lookup_bdev to make the use case clear,
and return an errno, where -EINVAL means the string could not be
parsed, and -ENODEV means it the string was valid, but there was
no device found for it.
Also stub out the whole call for !CONFIG_BLOCK as all the non-block
root cases are always covered in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Assign a Root_Generic magic value for UBI/MTD root and handle the root
mounting in mount_root like all other root types. Besides making the
code more clear this also means that UBI/MTD root can be used together
with an initrd (not that anyone should care).
Also factor parsing of the root name into a helper now that it can
be easily done and will get more complicated with subsequent patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove all unused defines, and just use the expanded versions for
the SCSI disk majors.
I've decided to keep Root_RAM0 even if it could be expanded as there
is a lot of special casing for it in the init code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bool is the most sensible return value for a yes/no return. Also
add __init as this funtion is only called from the early boot code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230531125535.676098-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new ->shutdown super operation that can be used to tell the file
system to shut down, and call it from newly created holder ops when the
block device under a file system shuts down.
This only covers the main block device for "simple" file systems using
get_tree_bdev / mount_bdev. File systems their own get_tree method
or opening additional devices will need to set up their own
blk_holder_ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a mark_dead method to blk_holder_ops that is called from blk_mark_disk_dead
to notify the holder that the block device it is using has been marked dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims. It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for 6.4
Error paths is corrected across icc-bwmon, rpmh-rsc, ramp_controller and
rmtfs. The ice module is renamed qcom_ice, to avoid clashing with
existing "ice" driver.
SA8155P-specific RPMh power-domains are introduced to avoid the code
trying to access resources that exists on SM8150, but not on SA8155P.
Lastly, changes to the EDAC driver to fix an issue where the driver
performs mmio based on the wrong register map.
* tag 'qcom-driver-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
dt-bindings: cache: qcom,llcc: Fix SM8550 description
soc: qcom: rpmhpd: Add SA8155P power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision
soc: qcom: icc-bwmon: fix incorrect error code passed to dev_err_probe()
Link: https://lore.kernel.org/r/20230601141058.2246039-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use proper notion for 16bit values for fixing the sparse warnings.
Fixes: f8ddb0fb3289 ("ALSA: usb-audio: Define USB MIDI 2.0 specs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305260528.wcqjXso8-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202305270534.odwHL9F0-lkp@intel.com/
Link: https://lore.kernel.org/r/20230605144758.6677-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Sidharth reports that on M2, the PMU never generates any interrupt
when using 'perf record', which is a annoying as you get no sample.
I'm temped to say "no sample, no problem", but others may have
a different opinion.
Upon investigation, it appears that the counters on M2 are
significantly different from the ones on M1, as they count on
64 bits instead of 48. Which of course, in the fine M1 tradition,
means that we can only use 63 bits, as the top bit is used to signal
the interrupt...
This results in having to introduce yet another flag to indicate yet
another odd counter width. Who knows what the next crazy implementation
will do...
With this, perf can work out the correct offset, and 'perf record'
works as intended.
Tested on M2 and M2-Pro CPUs.
Cc: Janne Grunau <j@jannau.net>
Cc: Hector Martin <marcan@marcan.st>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Fixes: 7d0bfb7c9977 ("drivers/perf: apple_m1: Add Apple M2 support")
Reported-by: Sidharth Kshatriya <sid.kshatriya@gmail.com>
Tested-by: Sidharth Kshatriya <sid.kshatriya@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230528080205.288446-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
read_poll_timeout_atomic() uses ktime_get() to implement the timeout
feature, just like its non-atomic counterpart. However, there are
several issues with this, due to its use in atomic contexts:
1. When called in the s2ram path (as typically done by clock or PM
domain drivers), timekeeping may be suspended, triggering the
WARN_ON(timekeeping_suspended) in ktime_get():
WARNING: CPU: 0 PID: 654 at kernel/time/timekeeping.c:843 ktime_get+0x28/0x78
Calling ktime_get_mono_fast_ns() instead of ktime_get() would get
rid of that warning. However, that would break timeout handling,
as (at least on systems with an ARM architectured timer), the time
returned by ktime_get_mono_fast_ns() does not advance while
timekeeping is suspended.
Interestingly, (on the same ARM systems) the time returned by
ktime_get() does advance while timekeeping is suspended, despite
the warning.
2. Depending on the actual clock source, and especially before a
high-resolution clocksource (e.g. the ARM architectured timer)
becomes available, time may not advance in atomic contexts, thus
breaking timeout handling.
Fix this by abandoning the idea that one can rely on timekeeping to
implement timeout handling in all atomic contexts, and switch from a
global time-based to a locally-estimated timeout handling. In most
(all?) cases the timeout condition is exceptional and an error
condition, hence any additional delays due to underestimating wall clock
time are irrelevant.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/3d2a2f4e553489392d871108797c3be08f88300b.1685692810.git.geert+renesas@glider.be
|
|
It is considered good practice to call cpu_relax() in busy loops, see
Documentation/process/volatile-considered-harmful.rst. This can not
only lower CPU power consumption or yield to a hyperthreaded twin
processor, but also allows an architecture to mitigate hardware issues
(e.g. ARM Erratum 754327 for Cortex-A9 prior to r2p0) in the
architecture-specific cpu_relax() implementation.
In addition, cpu_relax() is also a compiler barrier. It is not
immediately obvious that the @op argument "function" will result in an
actual function call (e.g. in case of inlining).
Where a function call is a C sequence point, this is lost on inlining.
Therefore, with agressive enough optimization it might be possible for
the compiler to hoist the:
(val) = op(args);
"load" out of the loop because it doesn't see the value changing. The
addition of cpu_relax() would inhibit this.
As the iopoll helpers lack calls to cpu_relax(), people are sometimes
reluctant to use them, and may fall back to open-coded polling loops
(including cpu_relax() calls) instead.
Fix this by adding calls to cpu_relax() to the iopoll helpers:
- For the non-atomic case, it is sufficient to call cpu_relax() in
case of a zero sleep-between-reads value, as a call to
usleep_range() is a safe barrier otherwise. However, it doesn't
hurt to add the call regardless, for simplicity, and for similarity
with the atomic case below.
- For the atomic case, cpu_relax() must be called regardless of the
sleep-between-reads value, as there is no guarantee all
architecture-specific implementations of udelay() handle this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/45c87bec3397fdd704376807f0eec5cc71be440f.1685692810.git.geert+renesas@glider.be
|
|
All other NFSv[23] procedures manage to keep page_ptr and
rq_next_page in lock step.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In the syscall test of UnixBench, performance regression occurred due
to false sharing.
The lock and atomic members, including file::f_lock, file::f_count and
file::f_pos_lock are highly contended and frequently updated in the
high-concurrency test scenarios. perf c2c indentified one affected
read access, file::f_op.
To prevent false sharing, the layout of file struct is changed as
following
(A) f_lock, f_count and f_pos_lock are put together to share the same
cache line.
(B) The read mostly members, including f_path, f_inode, f_op are put
into a separate cache line.
(C) f_mode is put together with f_count, since they are used frequently
at the same time.
Due to '__randomize_layout' attribute of file struct, the updated layout
only can be effective when CONFIG_RANDSTRUCT_NONE is 'y'.
The optimization has been validated in the syscall test of UnixBench.
performance gain is 30~50%. Furthermore, to confirm the optimization
effectiveness on the other codes path, the results of fsdisk, fsbuffer
and fstime are also shown.
Here are the detailed test results of unixbench.
Command: numactl -C 3-18 ./Run -c 16 syscall fsbuffer fstime fsdisk
Without Patch
------------------------------------------------------------------------
File Copy 1024 bufsize 2000 maxblocks 875052.1 KBps (30.0 s, 2 samples)
File Copy 256 bufsize 500 maxblocks 235484.0 KBps (30.0 s, 2 samples)
File Copy 4096 bufsize 8000 maxblocks 2815153.5 KBps (30.0 s, 2 samples)
System Call Overhead 5772268.3 lps (10.0 s, 7 samples)
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 875052.1 2209.7
File Copy 256 bufsize 500 maxblocks 1655.0 235484.0 1422.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 2815153.5 4853.7
System Call Overhead 15000.0 5772268.3 3848.2
========
System Benchmarks Index Score (Partial Only) 2768.3
With Patch
------------------------------------------------------------------------
File Copy 1024 bufsize 2000 maxblocks 1009977.2 KBps (30.0 s, 2 samples)
File Copy 256 bufsize 500 maxblocks 264765.9 KBps (30.0 s, 2 samples)
File Copy 4096 bufsize 8000 maxblocks 3052236.0 KBps (30.0 s, 2 samples)
System Call Overhead 8237404.4 lps (10.0 s, 7 samples)
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 1009977.2 2550.4
File Copy 256 bufsize 500 maxblocks 1655.0 264765.9 1599.8
File Copy 4096 bufsize 8000 maxblocks 5800.0 3052236.0 5262.5
System Call Overhead 15000.0 8237404.4 5491.6
========
System Benchmarks Index Score (Partial Only) 3295.3
Signed-off-by: chenzhiyin <zhiyin.chen@intel.com>
Message-Id: <20230601092400.27162-1-zhiyin.chen@intel.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With commit 849ad04cf562a ("new helper: put_and_unmap_page()"), Al Viro
introduced the put_and_unmap_page() to use in those many places where we
have a common pattern consisting of calls to kunmap_local() +
put_page().
Obviously, first we unmap and then we put pages. Instead, the original
name of this helper seems to imply that we first put and then unmap.
Therefore, rename the helper and change the only known upstreamed user
(i.e., fs/sysv) before this helper enters common use and might become
difficult to find all call sites and instead easy to break the builds.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Message-Id: <20230602103307.5637-1-fmdefrancesco@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The AMD MI200 series accelerators are data center GPUs. They include
unified memory controllers and a data fabric similar to those used in
AMD x86 CPU products. The memory controllers report errors using MCA,
though these errors are generally handled through GPU drivers that
directly manage the accelerator device.
In some configurations, memory errors from these devices will be
reported through MCA and managed by x86 CPUs. The OS is expected to
handle these errors in similar fashion to MCA errors originating from
memory controllers on the CPUs. In Linux, this flow includes passing MCA
errors to a notifier chain with handlers in the EDAC subsystem.
The AMD64 EDAC module requires information from the memory controllers
and data fabric in order to provide detailed decoding of memory errors.
The information is read from hardware registers accessed through
interfaces in the data fabric.
The accelerator data fabrics are visible to the host x86 CPUs as PCI
devices just like x86 CPU data fabrics are already. However, the
accelerator fabrics have new and unique PCI IDs.
Add PCI IDs for the MI200 series of accelerator devices in order to
enable EDAC support. The data fabrics of the accelerator devices will be
enumerated as any other fabric already supported. System-specific
implementation details will be handled within the AMD64 EDAC module.
[ bp: Scrub off marketing speak. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230515113537.1052146-2-muralimk@amd.com
|
|
There are now no callers of xpcs_create(), so let's remove it from
public view to discourage future direct usage.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we can easily create a mdio-device that represents a
memory-mapped device that exposes an MDIO-like register layout, we don't
need the Altera TSE PCS anymore, since we can use the Lynx PCS instead.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There exists several examples today of devices that embed an ethernet
PHY or PCS directly inside an SoC. In this situation, either the device
is controlled through a vendor-specific register set, or sometimes
exposes the standard 802.3 registers that are typically accessed over
MDIO.
As phylib and phylink are designed to use mdiodevices, this driver
allows creating a virtual MDIO bus, that translates mdiodev register
accesses to regmap accesses.
The reason we use regmap is because there are at least 3 such devices
known today, 2 of them are Altera TSE PCS's, memory-mapped, exposed
with a 4-byte stride in stmmac's dwmac-socfpga variant, and a 2-byte
stride in altera-tse. The other one (nxp,sja1110-base-tx-mdio) is
exposed over SPI.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the atomics are documented in Documentation/atomic_t.txt, and
have no kerneldoc comments. There are a sufficient number of gotchas
(e.g. semantics, noinstr-safety) that it would be nice to have comments
to call these out, and it would be nice to have kerneldoc comments such
that these can be collated.
While it's possible to derive the semantics from the code, this can be
painful given the amount of indirection we currently have (e.g. fallback
paths), and it's easy to be mislead by naming, e.g.
* The unconditional void-returning ops *only* have relaxed variants
without a _relaxed suffix, and can easily be mistaken for being fully
ordered.
It would be nice to give these a _relaxed() suffix, but this would
result in significant churn throughout the kernel.
* Our naming of conditional and unconditional+test ops is rather
inconsistent, and it can be difficult to derive the name of an
operation, or to identify where an op is conditional or
unconditional+test.
Some ops are clearly conditional:
- dec_if_positive
- add_unless
- dec_unless_positive
- inc_unless_negative
Some ops are clearly unconditional+test:
- sub_and_test
- dec_and_test
- inc_and_test
However, what exactly those test is not obvious. A _test_zero suffix
might be clearer.
Others could be read ambiguously:
- inc_not_zero // conditional
- add_negative // unconditional+test
It would probably be worth renaming these, e.g. to inc_unless_zero and
add_test_negative.
As a step towards making this more consistent and easier to understand,
this patch adds kerneldoc comments for all generated *atomic*_*()
functions. These are generated from templates, with some common text
shared, making it easy to extend these in future if necessary.
I've tried to make these as consistent and clear as possible, and I've
deliberately ensured:
* All ops have their ordering explicitly mentioned in the short and long
description.
* All test ops have "test" in their short description.
* All ops are described as an expression using their usual C operator.
For example:
andnot: "Atomically updates @v to (@v & ~@i)"
inc: "Atomically updates @v to (@v + 1)"
Which may be clearer to non-naative English speakers, and allows all
the operations to be described in the same style.
* All conditional ops have their condition described as an expression
using the usual C operators. For example:
add_unless: "If (@v != @u), atomically updates @v to (@v + @i)"
cmpxchg: "If (@v == @old), atomically updates @v to @new"
Which may be clearer to non-naative English speakers, and allows all
the operations to be described in the same style.
* All bitwise ops (and,andnot,or,xor) explicitly mention that they are
bitwise in their short description, so that they are not mistaken for
performing their logical equivalents.
* The noinstr safety of each op is explicitly described, with a
description of whether or not to use the raw_ form of the op.
There should be no functional change as a result of this patch.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-26-mark.rutland@arm.com
|
|
Currently each ordering variant has several potential definitions,
with a mixture of preprocessor and C definitions, including several
copies of its C prototype, e.g.
| #if defined(arch_atomic_fetch_andnot_acquire)
| #define raw_atomic_fetch_andnot_acquire arch_atomic_fetch_andnot_acquire
| #elif defined(arch_atomic_fetch_andnot_relaxed)
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| int ret = arch_atomic_fetch_andnot_relaxed(i, v);
| __atomic_acquire_fence();
| return ret;
| }
| #elif defined(arch_atomic_fetch_andnot)
| #define raw_atomic_fetch_andnot_acquire arch_atomic_fetch_andnot
| #else
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| return raw_atomic_fetch_and_acquire(~i, v);
| }
| #endif
Make this a bit simpler by defining the C prototype once, and writing
the various potential definitions as plain C code guarded by ifdeffery.
For example, the above becomes:
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| #if defined(arch_atomic_fetch_andnot_acquire)
| return arch_atomic_fetch_andnot_acquire(i, v);
| #elif defined(arch_atomic_fetch_andnot_relaxed)
| int ret = arch_atomic_fetch_andnot_relaxed(i, v);
| __atomic_acquire_fence();
| return ret;
| #elif defined(arch_atomic_fetch_andnot)
| return arch_atomic_fetch_andnot(i, v);
| #else
| return raw_atomic_fetch_and_acquire(~i, v);
| #endif
| }
Which is far easier to read. As we now always have a single copy of the
C prototype wrapping all the potential definitions, we now have an
obvious single location for kerneldoc comments.
At the same time, the fallbacks for raw_atomic*_xhcg() are made to use
'new' rather than 'i' as the name of the new value. This is what the
existing fallback template used, and is more consistent with the
raw_atomic{_try,}cmpxchg() fallbacks.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-24-mark.rutland@arm.com
|
|
Currently, atomic-long is split into two sections, one defining the
raw_atomic_long_*() ops for CONFIG_64BIT, and one defining the raw
atomic_long_*() ops for !CONFIG_64BIT.
With many lines elided, this looks like:
| #ifdef CONFIG_64BIT
| ...
| static __always_inline bool
| raw_atomic_long_try_cmpxchg(atomic_long_t *v, long *old, long new)
| {
| return raw_atomic64_try_cmpxchg(v, (s64 *)old, new);
| }
| ...
| #else /* CONFIG_64BIT */
| ...
| static __always_inline bool
| raw_atomic_long_try_cmpxchg(atomic_long_t *v, long *old, long new)
| {
| return raw_atomic_try_cmpxchg(v, (int *)old, new);
| }
| ...
| #endif
The two definitions are spread far apart in the file, and duplicate the
prototype, making it hard to have a legible set of kerneldoc comments.
Make this simpler by defining the C prototype once, and writing the two
definitions inline. For example, the above becomes:
| static __always_inline bool
| raw_atomic_long_try_cmpxchg(atomic_long_t *v, long *old, long new)
| {
| #ifdef CONFIG_64BIT
| return raw_atomic64_try_cmpxchg(v, (s64 *)old, new);
| #else
| return raw_atomic_try_cmpxchg(v, (int *)old, new);
| #endif
| }
As we now always have a single copy of the C prototype wrapping all the
potential definitions, we now have an obvious single location for kerneldoc
comments. As a bonus, both the script and the generated file are
somewhat shorter.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-23-mark.rutland@arm.com
|
|
Currently the various ordering variants of an atomic operation are
defined in groups of full/acquire/release/relaxed ordering variants with
some shared ifdeffery and several potential definitions of each ordering
variant in different branches of the shared ifdeffery.
As an ordering variant can have several potential definitions down
different branches of the shared ifdeffery, it can be painful for a
human to find a relevant definition, and we don't have a good location
to place anything common to all definitions of an ordering variant (e.g.
kerneldoc).
Historically the grouping of full/acquire/release/relaxed ordering
variants was necessary as we filled in the missing atomics in the same
namespace as the architecture used. It would be easy to accidentally
define one ordering fallback in terms of another ordering fallback with
redundant barriers, and avoiding that would otherwise require a lot of
baroque ifdeffery.
With recent changes we no longer need to fill in the missing atomics in
the arch_atomic*_<op>() namespace, and only need to fill in the
raw_atomic*_<op>() namespace. Due to this, there's no risk of a
namespace collision, and we can define each raw_atomic*_<op> ordering
variant with its own ifdeffery checking for the arch_atomic*_<op>
ordering variants.
Restructure the fallbacks in this way, with each ordering variant having
its own ifdeffery of the form:
| #if defined(arch_atomic_fetch_andnot_acquire)
| #define raw_atomic_fetch_andnot_acquire arch_atomic_fetch_andnot_acquire
| #elif defined(arch_atomic_fetch_andnot_relaxed)
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| int ret = arch_atomic_fetch_andnot_relaxed(i, v);
| __atomic_acquire_fence();
| return ret;
| }
| #elif defined(arch_atomic_fetch_andnot)
| #define raw_atomic_fetch_andnot_acquire arch_atomic_fetch_andnot
| #else
| static __always_inline int
| raw_atomic_fetch_andnot_acquire(int i, atomic_t *v)
| {
| return raw_atomic_fetch_and_acquire(~i, v);
| }
| #endif
Note that where there's no relevant arch_atomic*_<op>() ordering
variant, we'll define the operation in terms of a distinct
raw_atomic*_<otherop>(), as this itself might have been filled in with a
fallback.
As we now generate the raw_atomic*_<op>() implementations directly, we
no longer need the trivial wrappers, so they are removed.
This makes the ifdeffery easier to follow, and will allow for further
improvements in subsequent patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-21-mark.rutland@arm.com
|
|
Now that arch_atomic*() usage is limited to the atomic headers, we no
longer have any users of arch_atomic_long_*(), and can generate
raw_atomic_long_*() directly.
Generate the raw_atomic_long_*() ops directly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-20-mark.rutland@arm.com
|
|
Now that we have raw_atomic*_<op>() definitions, there's no need to use
arch_atomic*_<op>() definitions outside of the low-level atomic
definitions.
Move treewide users of arch_atomic*_<op>() over to the equivalent
raw_atomic*_<op>().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-19-mark.rutland@arm.com
|
|
Currently a number of arch_atomic*_<op>() functions are optional, and
where an arch does not provide a given arch_atomic*_<op>() we will
define an implementation of arch_atomic*_<op>() in
atomic-arch-fallback.h.
Filling in the missing ops requires special care as we want to select
the optimal definition of each op (e.g. preferentially defining ops in
terms of their relaxed form rather than their fully-ordered form). The
ifdeffery necessary for this requires us to group ordering variants
together, which can be a bit painful to read, and is painful for
kerneldoc generation.
It would be easier to handle this if we generated ops into a separate
namespace, as this would remove the need to take special care with the
ifdeffery, and allow each ordering variant to be generated separately.
This patch adds a new set of raw_atomic_<op>() definitions, which are
currently trivial wrappers of their arch_atomic_<op>() equivalent. This
will allow us to move treewide users of arch_atomic_<op>() over to raw
atomic op before we rework the fallback generation to generate
raw_atomic_<op> directly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-18-mark.rutland@arm.com
|
|
Most architectures define the atomic/atomic64 xchg and cmpxchg
operations in terms of arch_xchg and arch_cmpxchg respectfully.
Add fallbacks for these cases and remove the trivial cases from arch
code. On some architectures the existing definitions are kept as these
are used to build other arch_atomic*() operations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-5-mark.rutland@arm.com
|
|
Currently a subset of the fallback templates have kerneldoc comments,
resulting in a haphazard set of generated kerneldoc comments as only
some operations have fallback templates to begin with.
We'd like to generate more consistent kerneldoc comments, and to do so
we'll need to restructure the way the fallback code is generated.
To minimize churn and to make it easier to restructure the fallback
code, this patch removes the existing kerneldoc comments from the
fallback templates. We can add new kerneldoc comments in subsequent
patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-3-mark.rutland@arm.com
|
|
No moar users, remove the monster.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.991907085@infradead.org
|
|
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.924677086@infradead.org
|
|
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.855976804@infradead.org
|
|
Add the try_cmpxchg() form to the per-cpu ops.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.587480729@infradead.org
|
|
Wire up the cmpxchg128 family in the atomic wrapper scripts.
These provide the generic cmpxchg128 family of functions from the
arch_ prefixed version, adding explicit instrumentation where needed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.519237070@infradead.org
|
|
Introduce [us]128 (when available). Unlike [us]64, ensure they are
always naturally aligned.
This also enables 128bit wide atomics (which require natural
alignment) such as cmpxchg128().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230531132323.385005581@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of tiny char/misc/other driver fixes for 6.4-rc5 that
resolve a number of reported issues. Included in here are:
- iio driver fixes
- fpga driver fixes
- test_firmware bugfixes
- fastrpc driver tiny bugfixes
- MAINTAINERS file updates for some subsystems
All of these have been in linux-next this past week with no reported
issues"
* tag 'char-misc-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (34 commits)
test_firmware: fix the memory leak of the allocated firmware buffer
test_firmware: fix a memory leak with reqs buffer
test_firmware: prevent race conditions by a correct implementation of locking
firmware_loader: Fix a NULL vs IS_ERR() check
MAINTAINERS: Vaibhav Gupta is the new ipack maintainer
dt-bindings: fpga: replace Ivan Bornyakov maintainership
MAINTAINERS: update Microchip MPF FPGA reviewers
misc: fastrpc: reject new invocations during device removal
misc: fastrpc: return -EPIPE to invocations on device removal
misc: fastrpc: Reassign memory ownership only for remote heap
misc: fastrpc: Pass proper scm arguments for secure map request
iio: imu: inv_icm42600: fix timestamp reset
iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value
iio: dac: mcp4725: Fix i2c_master_send() return value handling
iio: accel: kx022a fix irq getting
iio: bu27034: Ensure reset is written
iio: dac: build ad5758 driver when AD5758 is selected
iio: addac: ad74413: fix resistance input processing
iio: light: vcnl4035: fixed chip ID check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver and core fixes for 6.4-rc5. Most of these are
tiny driver fixes, including:
- udc driver bugfix
- f_fs gadget driver bugfix
- cdns3 driver bugfix
- typec bugfixes
But the "big" thing in here is a fix yet-again for how the USB buffers
are handled from userspace when dealing with DMA issues. The changes
were discussed a lot, and tested a lot, on the list, and acked by the
relevant mm maintainers and have been in linux-next all this past week
with no reported problems"
* tag 'usb-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tps6598x: Fix broken polling mode after system suspend/resume
mm: page_table_check: Ensure user pages are not slab pages
mm: page_table_check: Make it dependent on EXCLUSIVE_SYSTEM_RAM
usb: usbfs: Use consistent mmap functions
usb: usbfs: Enforce page requirements for mmap
dt-bindings: usb: snps,dwc3: Fix "snps,hsphy_interface" type
usb: gadget: udc: fix NULL dereference in remove()
usb: gadget: f_fs: Add unbind event before functionfs_unbind
usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM
|
|
Dan Carpenter reported a signedness bug in genphy_loopback(). Andrew
reports that:
"It is common to get this wrong in general with PHY drivers. Dan
regularly posts fixes like this soon after a PHY driver patch it
merged. I really wish we could somehow get the compiler to warn when
the result from phy_read() is stored into a unsigned type. It would
save Dan a lot of work."
Let's make phy_read*_poll_timeout() immune to further issues when "val"
is an unsigned type by storing the read function's result in a signed
int as well as "val", and using the signed variable both to check for
an error and for propagating that error to the caller.
The advantage of this method is we don't change where the cast from
the signed return code to the user's variable occurs - so users will
see no change.
Previously Heiner changed phy_read_poll_timeout() to check for an error
before evaluating the user supplied condition, but didn't update
phy_read_mmd_poll_timeout(). Make that change there too.
Link: https://lore.kernel.org/r/d7bb312e-2428-45f6-b9b3-59ba544e8b94@kili.mountain
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1q4kX6-00BNuM-Mx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Two minor bug fixes
* tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix double fget() bug in __write_ports_addfd()
nfsd: make a copy of struct iattr before calling notify_change
|
|
Allow API users of kmem_cache_create to specify that they don't want
any slab merge or aliasing (with similar sized objects). Use this in
kfence_test.
The SKB (sk_buff) kmem_cache slab is critical for network performance.
Network stack uses kmem_cache_{alloc,free}_bulk APIs to gain
performance by amortising the alloc/free cost.
For the bulk API to perform efficiently the slub fragmentation need to
be low. Especially for the SLUB allocator, the efficiency of bulk free
API depend on objects belonging to the same slab (page).
When running different network performance microbenchmarks, I started
to notice that performance was reduced (slightly) when machines had
longer uptimes. I believe the cause was 'skbuff_head_cache' got
aliased/merged into the general slub for 256 bytes sized objects (with
my kernel config, without CONFIG_HARDENED_USERCOPY).
For SKB kmem_cache network stack have reasons for not merging, but it
varies depending on kernel config (e.g. CONFIG_HARDENED_USERCOPY).
We want to explicitly set SLAB_NO_MERGE for this kmem_cache.
Another use case for the flag has been described by David Sterba [1]:
> This can be used for more fine grained control over the caches or for
> debugging builds where separate slabs can verify that no objects leak.
> The slab_nomerge boot option is too coarse and would need to be
> enabled on all testing hosts. There are some other ways how to disable
> merging, e.g. a slab constructor but this disables poisoning besides
> that it adds additional overhead. Other flags are internal and may
> have other semantics.
> A concrete example what motivates the flag. During 'btrfs balance'
> slab top reported huge increase in caches like
> 1330095 1330095 100% 0.10K 34105 39 136420K Acpi-ParseExt
> 1734684 1734684 100% 0.14K 61953 28 247812K pid_namespace
> 8244036 6873075 83% 0.11K 229001 36 916004K khugepaged_mm_slot
> which was confusing and that it's because of slab merging was not the
> first idea. After rebooting with slab_nomerge all the caches were
> from btrfs_ namespace as expected.
[1] https://lore.kernel.org/all/20230524101748.30714-1-dsterba@suse.com/
[ vbabka@suse.cz: rename to SLAB_NO_MERGE, change the flag value to the
one proposed by David so it does not collide with internal SLAB/SLUB
flags, write a comment for the flag, expand changelog, drop the skbuff
part to be handled spearately ]
Link: https://lore.kernel.org/all/167396280045.539803.7540459812377220500.stgit@firesoul/
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
|
|
Add the ability to read the PHY maintained LPI counter which is in the
Clause 45 vendor space, device address 7, offset 0x803F. The counter is
cleared on read.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230531231729.1873932-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A few minor fixes for EFI, one of which fixes the reported boot
regression when booting x86 kernels using the BIOS based loader built
into the hypervisor framework on macOS.
- fix harmless warning in zboot code on 'make clean'
- add some missing prototypes
- fix boot regressions triggered by PE/COFF header image minor
version bump"
* tag 'efi-fixes-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Bump stub image version for macOS HVF compatibility
efi: fix missing prototype warnings
efi/libstub: zboot: Avoid eager evaluation of objcopy flags
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/sfc/tc.c
622ab656344a ("sfc: fix error unwinds in TC offload")
b6583d5e9e94 ("sfc: support TC decap rules matching on enc_src_port")
net/mptcp/protocol.c
5b825727d087 ("mptcp: add annotations around msk->subflow accesses")
e76c8ef5cc5b ("mptcp: refactor mptcp_stream_accept()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy Wear a Dress Day.
Fairly standard-sized batch of fixes, accounting for the lack of
sub-tree submissions this week. The mlx5 IRQ fixes are notable, people
were complaining about that. No fires burning.
Current release - regressions:
- eth: mlx5e:
- multiple fixes for dynamic IRQ allocation
- prevent encap offload when neigh update is running
- eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters
Current release - new code bugs:
- eth: mlx5e: DR, add missing mutex init/destroy in pattern manager
Previous releases - always broken:
- tcp: deny tcp_disconnect() when threads are waiting
- sched: prevent ingress Qdiscs from getting installed in random
locations in the hierarchy and moving around
- sched: flower: fix possible OOB write in fl_set_geneve_opt()
- netlink: fix NETLINK_LIST_MEMBERSHIPS length report
- udp6: fix race condition in udp6_sendmsg & connect
- tcp: fix mishandling when the sack compression is deferred
- rtnetlink: validate link attributes set at creation time
- mptcp: fix connect timeout handling
- eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked
- eth: amd-xgbe: fix the false linkup in xgbe_phy_status
- eth: mlx5e:
- fix corner cases in internal buffer configuration
- drain health before unregistering devlink
- usb: qmi_wwan: set DTR quirk for BroadMobi BM818
Misc:
- tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if
user_mss set"
* tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
mptcp: fix active subflow finalization
mptcp: add annotations around sk->sk_shutdown accesses
mptcp: fix data race around msk->first access
mptcp: consolidate passive msk socket initialization
mptcp: add annotations around msk->subflow accesses
mptcp: fix connect timeout handling
rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg
rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg
rtnetlink: call validate_linkmsg in rtnl_create_link
ice: recycle/free all of the fragments from multi-buffer frame
net: phy: mxl-gpy: extend interrupt fix to all impacted variants
net: renesas: rswitch: Fix return value in error path of xmit
net: dsa: mv88e6xxx: Increase wait after reset deactivation
net: ipa: Use correct value for IPA_STATUS_SIZE
tcp: fix mishandling when the sack compression is deferred.
net/sched: flower: fix possible OOB write in fl_set_geneve_opt()
sfc: fix error unwinds in TC offload
net/mlx5: Read embedded cpu after init bit cleared
net/mlx5e: Fix error handling in mlx5e_refresh_tirs
net/mlx5: Ensure af_desc.mask is properly initialized
...
|
|
When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.
To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.
This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.
Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.
Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c. Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn. vhost_worker now returns true if work was done.
The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit. This collection clears
__fatal_signal_pending. This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.
For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file. To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec. The
coredump code and de_thread have been modified to ignore vhost threads.
Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.
Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to use a flexible array rather than a zero-length one"
* tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: Replace zero-length array with flexible-array member
|
