summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2021-03-30mmc: sdio: fix a typo in the comment of SDIO_SD_REV_3_00Jisheng Zhang1-1/+1
I believe "Spev" is typo, should be "Spec". Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210311174157.561dada9@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: core: Drop reference counting of the bus_opsUlf Hansson1-2/+0
When the mmc_rescan work is enabled for execution (host->rescan_disable), it's the only instance per mmc host that is allowed to set/clear the host->bus_ops pointer. Besides the mmc_rescan work, there are a couple of scenarios when the host->bus_ops pointer may be accessed. Typically, those can be described as as below: *) Upper mmc driver layers (like the mmc block device driver or an SDIO functional driver) needs to execute a host->bus_ops callback. This can be considered as safe without having to use some special locking mechanism, because they operate on top of the struct mmc_card. As long as there is a card to operate upon, the mmc core guarantees that there is a host->bus_ops assigned as well. Note that, upper layer mmc drivers are of course responsible to clean up from themselves from their ->remove() callbacks, otherwise things would fall apart anyways. **) Via the mmc host instance, we may need to force a removal of an inserted mmc card. This happens when a mmc host driver gets unbind, for example. In this case, we protect the host->bus_ops pointer from concurrent accesses, by disabling the mmc_rescan work upfront (host->rescan_disable). See mmc_stop_host() for example. This said, it seems like the reference counting of the host->bus_ops pointer at some point have become superfluous. As this is an old mechanism of the mmc core, it a bit difficult to digest the history of when that could have happened. However, let's drop the reference counting to avoid unnecessary code-paths and lockings. Cc: Pierre Ossman <pierre@ossman.eu> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210212131610.236843-1-ulf.hansson@linaro.org
2021-03-30can: bittiming: add CAN_KBPS, CAN_MBPS and CAN_MHZ macrosVincent Mailhol1-0/+8
Add three macro to simplify the readability of big bit timing numbers: - CAN_KBPS: kilobits per second (one thousand) - CAN_MBPS: megabits per second (one million) - CAN_MHZ: megahertz per second (one million) Example: u32 bitrate_max = 8 * CAN_MBPS; struct can_clock clock = {.freq = 80 * CAN_MHZ}; instead of: u32 bitrate_max = 8000000; struct can_clock clock = {.freq = 80000000}; Apply the new macro to driver/net/can/dev/bittiming.c. Link: https://lore.kernel.org/r/20210306054040.76483-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30can: bittiming: add calculation for CAN FD Transmitter Delay Compensation (TDC)Vincent Mailhol1-0/+6
The logic for the tdco calculation is to just reuse the normal sample point: tdco = sp. Because the sample point is expressed in tenth of percent and the tdco is expressed in time quanta, a conversion is needed. At the end, ssp = tdcv + tdco = tdcv + sp. Another popular method is to set tdco to the middle of the bit: tdc->tdco = can_bit_time(dbt) / 2 During benchmark tests, we could not find a clear advantages for one of the two methods. The tdco calculation is triggered each time the data_bittiming is changed so that users relying on automated calculation can use the netlink interface the exact same way without need of new parameters. For example, a command such as: ip link set canX type can bitrate 500000 dbitrate 4000000 fd on would trigger the calculation. The user using CONFIG_CAN_CALC_BITTIMING who does not want automated calculation needs to manually set tdco to zero. For example with: ip link set canX type can tdco 0 bitrate 500000 dbitrate 4000000 fd on (if the tdco parameter is provided in a previous command, it will be overwritten). If tdcv is set to zero (default), it is automatically calculated by the transiver for each frame. As such, there is no code in the kernel to calculate it. tdcf has no automated calculation functions because we could not figure out a formula for this parameter. Link: https://lore.kernel.org/r/20210224002008.4158-6-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30can: dev: reorder struct can_priv members for better packingVincent Mailhol1-6/+7
Save eight bytes of holes on x86-64 architectures by reordering struct can_priv members. Before: $ pahole -C can_priv drivers/net/can/dev/dev.o struct can_priv { struct net_device * dev; /* 0 8 */ struct can_device_stats can_stats; /* 8 24 */ struct can_bittiming bittiming; /* 32 32 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct can_bittiming data_bittiming; /* 64 32 */ const struct can_bittiming_const * bittiming_const; /* 96 8 */ const struct can_bittiming_const * data_bittiming_const; /* 104 8 */ struct can_tdc tdc; /* 112 12 */ /* XXX 4 bytes hole, try to pack */ /* --- cacheline 2 boundary (128 bytes) --- */ const struct can_tdc_const * tdc_const; /* 128 8 */ const u16 * termination_const; /* 136 8 */ unsigned int termination_const_cnt; /* 144 4 */ u16 termination; /* 148 2 */ /* XXX 2 bytes hole, try to pack */ const u32 * bitrate_const; /* 152 8 */ unsigned int bitrate_const_cnt; /* 160 4 */ /* XXX 4 bytes hole, try to pack */ const u32 * data_bitrate_const; /* 168 8 */ unsigned int data_bitrate_const_cnt; /* 176 4 */ u32 bitrate_max; /* 180 4 */ struct can_clock clock; /* 184 4 */ enum can_state state; /* 188 4 */ /* --- cacheline 3 boundary (192 bytes) --- */ u32 ctrlmode; /* 192 4 */ u32 ctrlmode_supported; /* 196 4 */ u32 ctrlmode_static; /* 200 4 */ int restart_ms; /* 204 4 */ struct delayed_work restart_work; /* 208 168 */ /* XXX last struct has 4 bytes of padding */ /* --- cacheline 5 boundary (320 bytes) was 56 bytes ago --- */ int (*do_set_bittiming)(struct net_device *); /* 376 8 */ /* --- cacheline 6 boundary (384 bytes) --- */ int (*do_set_data_bittiming)(struct net_device *); /* 384 8 */ int (*do_set_mode)(struct net_device *, enum can_mode); /* 392 8 */ int (*do_set_termination)(struct net_device *, u16); /* 400 8 */ int (*do_get_state)(const struct net_device *, enum can_state *); /* 408 8 */ int (*do_get_berr_counter)(const struct net_device *, struct can_berr_counter *); /* 416 8 */ unsigned int echo_skb_max; /* 424 4 */ /* XXX 4 bytes hole, try to pack */ struct sk_buff * * echo_skb; /* 432 8 */ /* size: 440, cachelines: 7, members: 31 */ /* sum members: 426, holes: 4, sum holes: 14 */ /* paddings: 1, sum paddings: 4 */ /* last cacheline: 56 bytes */ }; After: $ pahole -C can_priv drivers/net/can/dev/dev.o struct can_priv { struct net_device * dev; /* 0 8 */ struct can_device_stats can_stats; /* 8 24 */ const struct can_bittiming_const * bittiming_const; /* 32 8 */ const struct can_bittiming_const * data_bittiming_const; /* 40 8 */ struct can_bittiming bittiming; /* 48 32 */ /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */ struct can_bittiming data_bittiming; /* 80 32 */ const struct can_tdc_const * tdc_const; /* 112 8 */ struct can_tdc tdc; /* 120 12 */ /* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */ unsigned int bitrate_const_cnt; /* 132 4 */ const u32 * bitrate_const; /* 136 8 */ const u32 * data_bitrate_const; /* 144 8 */ unsigned int data_bitrate_const_cnt; /* 152 4 */ u32 bitrate_max; /* 156 4 */ struct can_clock clock; /* 160 4 */ unsigned int termination_const_cnt; /* 164 4 */ const u16 * termination_const; /* 168 8 */ u16 termination; /* 176 2 */ /* XXX 2 bytes hole, try to pack */ enum can_state state; /* 180 4 */ u32 ctrlmode; /* 184 4 */ u32 ctrlmode_supported; /* 188 4 */ /* --- cacheline 3 boundary (192 bytes) --- */ u32 ctrlmode_static; /* 192 4 */ int restart_ms; /* 196 4 */ struct delayed_work restart_work; /* 200 168 */ /* XXX last struct has 4 bytes of padding */ /* --- cacheline 5 boundary (320 bytes) was 48 bytes ago --- */ int (*do_set_bittiming)(struct net_device *); /* 368 8 */ int (*do_set_data_bittiming)(struct net_device *); /* 376 8 */ /* --- cacheline 6 boundary (384 bytes) --- */ int (*do_set_mode)(struct net_device *, enum can_mode); /* 384 8 */ int (*do_set_termination)(struct net_device *, u16); /* 392 8 */ int (*do_get_state)(const struct net_device *, enum can_state *); /* 400 8 */ int (*do_get_berr_counter)(const struct net_device *, struct can_berr_counter *); /* 408 8 */ unsigned int echo_skb_max; /* 416 4 */ /* XXX 4 bytes hole, try to pack */ struct sk_buff * * echo_skb; /* 424 8 */ /* size: 432, cachelines: 7, members: 31 */ /* sum members: 426, holes: 2, sum holes: 6 */ /* paddings: 1, sum paddings: 4 */ /* last cacheline: 48 bytes */ }; Link: https://lore.kernel.org/r/20210224002008.4158-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30can: add new CAN FD bittiming parameters: Transmitter Delay Compensation (TDC)Vincent Mailhol2-0/+68
At high bit rates, the propagation delay from the TX pin to the RX pin of the transceiver causes measurement errors: the sample point on the RX pin might occur on the previous bit. This issue is addressed in ISO 11898-1 section 11.3.3 "Transmitter delay compensation" (TDC). This patch adds two new structures: can_tdc and can_tdc_const in order to implement this TDC. The structures are then added to can_priv. A controller supports TDC if an only if can_priv::tdc_const is not NULL. TDC is active if and only if: - fd flag is on - can_priv::tdc.tdco is not zero. It is the driver responsibility to check those two conditions are met. No new controller modes are introduced (i.e. no CAN_CTRL_MODE_TDC) in order not to be redundant with above logic. The names of the parameters are chosen to match existing CAN controllers specification. References: - Bosch C_CAN FD8: https://www.bosch-semiconductors.com/media/ip_modules/pdf_2/c_can_fd8/users_manual_c_can_fd8_r210_1.pdf - Microchip CAN FD Controller Module: http://ww1.microchip.com/downloads/en/DeviceDoc/MCP251XXFD-CAN-FD-Controller-Module-Family-Reference-Manual-20005678B.pdf - SAM E701/S70/V70/V71 Family: https://www.mouser.com/datasheet/2/268/60001527A-1284321.pdf Link: https://lore.kernel.org/r/20210224002008.4158-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30can: dev: can_free_echo_skb(): extend to return can frame lengthMarc Kleine-Budde1-1/+2
In order to implement byte queue limits (bql) in CAN drivers, the length of the CAN frame needs to be passed into the networking stack even if the transmission failed for some reason. To avoid to calculate this length twice, extend can_free_echo_skb() to return that value. Convert all users of this function, too. This patch is the natural extension of commit: | 9420e1d495e2 ("can: dev: can_get_echo_skb(): extend to return can | frame length") Link: https://lore.kernel.org/r/20210319142700.305648-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30soundwire: add definition for DPn BlockPackingModePierre-Louis Bossart1-0/+6
For some reason we don't have an enum for this concept. Add definitions following Table 102 of the SoundWire 1.2 specification. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323050701.23760-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soc: qcom: address kernel-doc warningsLukas Bulwahn4-7/+7
The command: find ./include/linux/soc/qcom/ | xargs ./scripts/kernel-doc -none reports: ./include/linux/soc/qcom/qmi.h:26: warning: cannot understand function prototype: 'struct qmi_header ' ./include/linux/soc/qcom/qmi.h:101: warning: cannot understand function prototype: 'struct qmi_response_type_v01 ' ./include/linux/soc/qcom/irq.h:19: warning: expecting prototype for QCOM specific IRQ domain flags that distinguishes the handling of wakeup(). Prototype was for IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP() instead ./include/linux/soc/qcom/apr.h:126: warning: Function parameter or member '__apr_driver' not described in 'module_apr_driver' ./include/linux/soc/qcom/apr.h:126: warning: Excess function parameter '__aprbus_driver' description in 'module_apr_driver' ./include/linux/soc/qcom/llcc-qcom.h:43: warning: cannot understand function prototype: 'struct llcc_slice_desc ' ./include/linux/soc/qcom/llcc-qcom.h:60: warning: cannot understand function prototype: 'struct llcc_edac_reg_data ' ./include/linux/soc/qcom/llcc-qcom.h:86: warning: cannot understand function prototype: 'struct llcc_drv_data ' Address all those warnings by: - prefixing kernel-doc descriptions for structs with the keyword 'struct', - turning a kernel-doc comment that does not follow the kernel-doc syntax into a normal comment, and - correcting a parameter name in a kernel-doc comment. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20210327065642.11969-3-lukas.bulwahn@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-29ACPI: tables: x86: Reserve memory occupied by ACPI tablesRafael J. Wysocki1-1/+8
The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy <george.kennedy@oracle.com> Tested-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
2021-03-29locking/rtmutex: Remove empty and unused debug stubsThomas Gleixner1-12/+2
No users or useless and therefore just ballast. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210326153943.549192485@linutronix.de
2021-03-29locking/rtmutex: Consolidate rt_mutex_init()Sebastian Andrzej Siewior1-9/+3
rt_mutex_init() only initializes lockdep if CONFIG_DEBUG_RT_MUTEXES is enabled, which is fine because all lockdep variants select it, but there is no reason to do so. Move the function outside of the CONFIG_DEBUG_RT_MUTEXES block which removes #ifdeffery. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210326153943.437405350@linutronix.de
2021-03-29locking/rtmutex: Remove output from deadlock detectorSebastian Andrzej Siewior1-7/+0
The rtmutex specific deadlock detector predates lockdep coverage of rtmutex and since commit f5694788ad8da ("rt_mutex: Add lockdep annotations") it contains a lot of redundant functionality: - lockdep will detect an potential deadlock before rtmutex-debug has a chance to do so - the deadlock debugging is restricted to rtmutexes which are not associated to futexes and have an active waiter, which is covered by lockdep already Remove the redundant functionality and move actual deadlock WARN() into the deadlock code path. The latter needs a seperate cleanup. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210326153943.320398604@linutronix.de
2021-03-29locking/rtmutex: Remove rtmutex deadlock tester leftoversSebastian Andrzej Siewior1-5/+2
The following debug members of 'struct rtmutex' are unused: - save_state: No users - file,line: Printed if ::name is NULL. This is only used for non-futex locks so ::name is never NULL - magic: Assigned to NULL by rt_mutex_destroy(), no further usage Remove them along with unused inline and macro leftovers related to the long gone deadlock tester. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210326153943.195064296@linutronix.de
2021-03-29locking/rtmutex: Remove rt_mutex_timed_lock()Sebastian Andrzej Siewior1-3/+0
rt_mutex_timed_lock() has no callers since: c051b21f71d1f ("rtmutex: Confine deadlock logic to futex") Remove it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210326153943.061103415@linutronix.de
2021-03-29Merge tag 'v5.12-rc5' into locking/core, to pick up fixesIngo Molnar23-66/+127
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-03-29block: remove the revalidate_disk methodChristoph Hellwig1-1/+0
No implementations left. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210308074550.422714-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-29Merge tag 'irq-no-autoen-2021-03-25' of ↵Inki Dae1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into exynos-drm-next Tag for the input subsystem to pick up
2021-03-29gpio: regmap: set gpio_chip of_nodeÁlvaro Fernández Rojas1-0/+4
This is needed for properly registering GPIO regmap as a child of a regmap pin controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20210324081923.20379-3-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIPÁlvaro Fernández Rojas1-0/+9
The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP isn't enabled. Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()") Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Michael Walle <michael@walle.cc> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20210324081923.20379-2-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29iio:imu:mpu6050: Modify matricies to matricesGuoqing Chi1-1/+1
The plural of "matrix" is "matrices". Signed-off-by: Guoqing Chi <chiguoqing@yulong.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210322013024.1849-1-chi962464zy@163.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29firmware: arm_scmi: Port clock protocol to new protocols interfaceCristian Marussi1-5/+15
Convert internals of protocol implementation to use protocol handles and expose a new protocol operations interface for SCMI driver using the new get/put common operations, while keeping the old handle->clk_ops still around to ease transition. Remove handle->clock_priv now unused. Link: https://lore.kernel.org/r/20210316124903.35011-18-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Remove legacy scmi_power_ops protocol interfaceCristian Marussi1-11/+0
Now that all the SCMI driver users have been migrated to the new interface remove the legacy interface and all the transient code. Link: https://lore.kernel.org/r/20210316124903.35011-17-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Port power protocol to new protocols interfaceCristian Marussi1-7/+13
Convert internals of protocol implementation to use protocol handles and expose a new protocol operations interface for SCMI driver using the new get/put common operations, while keeping the old handle->power_ops still around to ease transition. Remove handle->power_priv now unused. Link: https://lore.kernel.org/r/20210316124903.35011-15-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Remove legacy scmi_perf_ops protocol interfaceCristian Marussi1-27/+0
Now that all the SCMI driver users have been migrated to the new interface remove the legacy interface and all the transient code. Link: https://lore.kernel.org/r/20210316124903.35011-14-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Port perf protocol to new protocols interfaceCristian Marussi1-4/+26
Convert internals of protocol implementation to use protocol handles and expose a new protocol operations interface for SCMI driver using the new get/put common operations, while keeping the old handle->perf_ops still around to ease transition. Remove handle->perf_priv now unused. Link: https://lore.kernel.org/r/20210316124903.35011-12-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Introduce new devres notification opsCristian Marussi1-3/+19
Expose to the SCMI drivers a new alternative devres managed notifications API based on protocol handles. All drivers still keep using the old API, no functional change. Link: https://lore.kernel.org/r/20210316124903.35011-6-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Introduce devres get/put protocols operationsCristian Marussi1-0/+11
Expose to the SCMI drivers a new devres managed common protocols API based on generic get/put methods and protocol handles. All drivers still keep using the old API, no functional change. Link: https://lore.kernel.org/r/20210316124903.35011-4-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29firmware: arm_scmi: Extend protocol registration interfacesCristian Marussi1-4/+4
Extend common protocol registration routines and provide some new generic protocols get/put helpers that can track protocols usage and automatically perform the proper initialization and de-initialization on demand when required. Convert all standard protocols to use this new registration scheme while keeping them all still using the usual initialization logic bound to SCMI devices probing. Link: https://lore.kernel.org/r/20210316124903.35011-2-cristian.marussi@arm.com Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-28Merge tag 'locking-urgent-2021-03-28' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "Fix the non-debug mutex_lock_io_nested() method to map to mutex_lock_io() instead of mutex_lock(). Right now nothing uses this API explicitly, but this is an accident waiting to happen" * tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: Fix non debug version of mutex_lock_io_nested()
2021-03-28include: linux: mtd: Remove duplicate include of nand.hWan Jiabing1-1/+0
linux/mtd/nand.h has been included at line 17. So we remove the duplicate one at line 21. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210323031737.259365-1-wanjiabing@vivo.com
2021-03-28mtd: add OTP (one-time-programmable) erase ioctlMichael Walle1-0/+3
This may sound like a contradiction but some SPI-NOR flashes really support erasing their OTP region until it is finally locked. Having the possibility to erase an OTP region might come in handy during development. The ioctl argument follows the OTPLOCK style. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210303201819.2752-1-michael@walle.cc
2021-03-28mtd: rawnand: remove duplicate include in rawnand.hZhang Yunkai1-1/+0
'linux/mtd/nand.h' included in 'rawnand.h' is duplicated. It is also included in the 17th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210313105702.365878-1-zhang.yunkai@zte.com.cn
2021-03-28power: supply: Fix build error when CONFIG_POWER_SUPPLY is not enabled.Ray Chi1-0/+7
The build error happens when CONFIG_POWER_SUPPLY is not enabled. h8300-linux-ld: drivers/usb/dwc3/gadget.o: in function `.L59': >> gadget.c:(.text+0x655): undefined reference to `power_supply_set_property' Fixes: 99288de36020 ("usb: dwc3: add an alternate path in vbus_draw callback") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ray Chi <raychi@google.com> Link: https://lore.kernel.org/r/20210327182809.1814480-3-raychi@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-27of: Add missing 'Return' section in kerneldoc commentsRob Herring1-22/+41
Many of the DT kerneldoc comments are lacking a 'Return' section. Let's add the section in cases we have a description of return values. There's still some cases where the return values are not documented. Cc: Frank Rowand <frowand.list@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20210325164713.1296407-8-robh@kernel.org
2021-03-27Merge tag 'fpga-fixes-for-5.12' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus Moritz writes: FPGA Manager fixes for 5.12 Richard's fix addresses an errornously flipped flag. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my fixes branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
2021-03-27bpf: selftests: Add kfunc_call testMartin KaFai Lau1-0/+6
This patch adds a few kernel function bpf_kfunc_call_test*() for the selftest's test_run purpose. They will be allowed for tc_cls prog. The selftest calling the kernel function bpf_kfunc_call_test*() is also added in this patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015252.1551395-1-kafai@fb.com
2021-03-27bpf: Support bpf program calling kernel functionMartin KaFai Lau3-0/+26
This patch adds support to BPF verifier to allow bpf program calling kernel function directly. The use case included in this set is to allow bpf-tcp-cc to directly call some tcp-cc helper functions (e.g. "tcp_cong_avoid_ai()"). Those functions have already been used by some kernel tcp-cc implementations. This set will also allow the bpf-tcp-cc program to directly call the kernel tcp-cc implementation, For example, a bpf_dctcp may only want to implement its own dctcp_cwnd_event() and reuse other dctcp_*() directly from the kernel tcp_dctcp.c instead of reimplementing (or copy-and-pasting) them. The tcp-cc kernel functions mentioned above will be white listed for the struct_ops bpf-tcp-cc programs to use in a later patch. The white listed functions are not bounded to a fixed ABI contract. Those functions have already been used by the existing kernel tcp-cc. If any of them has changed, both in-tree and out-of-tree kernel tcp-cc implementations have to be changed. The same goes for the struct_ops bpf-tcp-cc programs which have to be adjusted accordingly. This patch is to make the required changes in the bpf verifier. First change is in btf.c, it adds a case in "btf_check_func_arg_match()". When the passed in "btf->kernel_btf == true", it means matching the verifier regs' states with a kernel function. This will handle the PTR_TO_BTF_ID reg. It also maps PTR_TO_SOCK_COMMON, PTR_TO_SOCKET, and PTR_TO_TCP_SOCK to its kernel's btf_id. In the later libbpf patch, the insn calling a kernel function will look like: insn->code == (BPF_JMP | BPF_CALL) insn->src_reg == BPF_PSEUDO_KFUNC_CALL /* <- new in this patch */ insn->imm == func_btf_id /* btf_id of the running kernel */ [ For the future calling function-in-kernel-module support, an array of module btf_fds can be passed at the load time and insn->off can be used to index into this array. ] At the early stage of verifier, the verifier will collect all kernel function calls into "struct bpf_kfunc_desc". Those descriptors are stored in "prog->aux->kfunc_tab" and will be available to the JIT. Since this "add" operation is similar to the current "add_subprog()" and looking for the same insn->code, they are done together in the new "add_subprog_and_kfunc()". In the "do_check()" stage, the new "check_kfunc_call()" is added to verify the kernel function call instruction: 1. Ensure the kernel function can be used by a particular BPF_PROG_TYPE. A new bpf_verifier_ops "check_kfunc_call" is added to do that. The bpf-tcp-cc struct_ops program will implement this function in a later patch. 2. Call "btf_check_kfunc_args_match()" to ensure the regs can be used as the args of a kernel function. 3. Mark the regs' type, subreg_def, and zext_dst. At the later do_misc_fixups() stage, the new fixup_kfunc_call() will replace the insn->imm with the function address (relative to __bpf_call_base). If needed, the jit can find the btf_func_model by calling the new bpf_jit_find_kfunc_model(prog, insn). With the imm set to the function address, "bpftool prog dump xlated" will be able to display the kernel function calls the same way as it displays other bpf helper calls. gpl_compatible program is required to call kernel function. This feature currently requires JIT. The verifier selftests are adjusted because of the changes in the verbose log in add_subprog_and_kfunc(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015142.1544736-1-kafai@fb.com
2021-03-27bpf: Refactor btf_check_func_arg_matchMartin KaFai Lau2-2/+7
This patch moved the subprog specific logic from btf_check_func_arg_match() to the new btf_check_subprog_arg_match(). The core logic is left in btf_check_func_arg_match() which will be reused later to check the kernel function call. The "if (!btf_type_is_ptr(t))" is checked first to improve the indentation which will be useful for a later patch. Some of the "btf_kind_str[]" usages is replaced with the shortcut "btf_type_str(t)". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015136.1544504-1-kafai@fb.com
2021-03-27bpf: Simplify freeing logic in linfo and jited_linfoMartin KaFai Lau1-2/+1
This patch simplifies the linfo freeing logic by combining "bpf_prog_free_jited_linfo()" and "bpf_prog_free_unused_jited_linfo()" into the new "bpf_prog_jit_attempt_done()". It is a prep work for the kernel function call support. In a later patch, freeing the kernel function call descriptors will also be done in the "bpf_prog_jit_attempt_done()". "bpf_prog_free_linfo()" is removed since it is only called by "__bpf_prog_put_noref()". The kvfree() are directly called instead. It also takes this chance to s/kcalloc/kvcalloc/ for the jited_linfo allocation. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210325015130.1544323-1-kafai@fb.com
2021-03-27bpf: Take module reference for trampoline in moduleJiri Olsa1-0/+2
Currently module can be unloaded even if there's a trampoline register in it. It's easily reproduced by running in parallel: # while :; do ./test_progs -t module_attach; done # while :; do rmmod bpf_testmod; sleep 0.5; done Taking the module reference in case the trampoline's ip is within the module code. Releasing it when the trampoline's ip is unregistered. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210326105900.151466-1-jolsa@kernel.org
2021-03-26Merge tag 'for-5.12/dm-fixes-2' of ↵Linus Torvalds1-1/+14
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target's optional argument processing. - Fix DM core's zoned model and zone sectors checks. - Fix spurious "detected capacity change" pr_info() when creating new DM device. - Fix DM ioctl out of bounds array access in handling of DM_LIST_DEVICES_CMD when no devices exist. * tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm ioctl: fix out of bounds array access when no devices dm: don't report "detected capacity change" on device creation dm table: Fix zoned model check and zone sectors check dm verity: fix DM_VERITY_OPTS_MAX value
2021-03-26soc: qcom-geni-se: Cleanup the code to remove proxy votesRoja Rani Yarubandi1-2/+0
This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") ICC core and platforms drivers supports sync_state feature, which ensures that the default ICC BW votes from the bootloader is not removed until all it's consumers are probes. The proxy votes were needed in case other QUP child drivers I2C, SPI probes before UART, they can turn off the QUP-CORE clock which is shared resources for all QUP driver, this causes unclocked access to HW from earlycon. Given above support from ICC there is no longer need to maintain proxy votes on QUP-CORE ICC node from QUP wrapper driver for early console usecase, the default votes won't be removed until real console is probed. Cc: stable@vger.kernel.org Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26gpiolib: some edits of kernel docs for clarityRandy Dunlap1-6/+6
Fix a few typos and some punctuation. Also, change CONFIG_OF to CONFIG_OF_GPIO in one comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-26irqdomain: Introduce irq_domain_create_simple() APIAndy Shevchenko1-5/+14
Linus Walleij pointed out that ird_domain_add_simple() gained additional functionality and can't be anymore replaced with a simple conditional. In preparation to upgrade GPIO library to use fwnode, introduce irq_domain_create_simple() API which is functional equivalent to the existing irq_domain_add_simple(), but takes a pointer to the struct fwnode_handle as a parameter. While at it, amend documentation to mention irq_domain_create_*() functions where it makes sense. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-26Merge tag 'iio-for-5.13a' of ↵Greg Kroah-Hartman16-25/+87
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 1st set of IIO/counter device support, features and cleanup in the 5.13 cycle Big set in here from Alexandru Ardelean enabling multiple buffer support. This includes providing a new directory per buffer that combines what was previously in buffer/ and scan_elements/. Old interfaces still in place for compatiblity. Note immuatable branch for scmi patches to allow for some significant rework going on in that subsystem. Merge required updating to reflect some changes in IIO. Late rebase to fix some wrong fixes tags due to some earlier rebases made necessary by messing up the immutable branch. IIO New Device Support * adi,ad5686 - Add info to support AD5673R and AD5677R * bosch,bmi088 - New driver supporting this accelerometer + gyroscope * cros_ec_mkbp - New driver for this proximity sensor that exposes a 'front' sensor. Very simple switch like device, but driver allows it to share interface with more sophisticated proximity sensors. * iio_scmi - New driver to support ARM SCMI protocol to expose underlying accelerometers and gyroscopes via this firmware interface. * st,st_magn - Add ID for IISMDC magnetometer. * ti,ads131e0 - New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs Counter New Device Support * IRQ or GPIO based counter - New driver for a conceptually simple counter that uses interrupts to perform the count. Features * core - Dual buffer supprt including: Various helpers to centralize handling of bufferer related elements. Document existing and new IOCTLs Register the IIO chrdev only if it can actually be used for anything. Rework attribute group creation in the core (lots of patches) Merge buffer/ and scan_elements/ entries into one list + maintain backwards compatible set. Introduce the internal logic and IOCTL to allow multiple buffers + access to an anon FD per buffer to actually read from it. Tidy up tools/iio/iio_generic_buffer and switch to new interfaces. Update ABI docs. A few follow up fixes, unsuprising as this was a huge bit of rework. - Move common case setting of trig->parent to the core. - Provide an iio_read_channel_processed_scale() to avoid loss of precision from iio_read_channel_processed() then applying integer scale. Use it in ntc_thermistor driver in hwmon. - Allow drivers to specify labels from elsewhere than DT. Use it for bmc150 and kxcjk-1013 labels related to position on 2 in one tablets. - Document label usage for proximity and accelerometer sensors. - Some local variable renames for consistency tools - Add -a parameter to iio_event_monitor to allow autoenabling of events. * acpi_als - Add trigger support for devices that don't support notification method. * adi,ad7124 - Allow more than 8 channels. This is a complex little device, but is capable of supporting up to 16 channels if the share certain configuration settings. * hrtimer-trigger - Support sampling frequency below 1Hz. * mediatek,mt8195-auxadc - Add compatible to binding docs (always also includes mt8173) * st,stm32-adc - Enable timetamps when not using DMA. * vishay,vcnl3020 - Sampling frequency control. Cleanup and minor fixes: * treewide - Use some getter and setter functions instead of opencoding. - Set of fixes for pointless casts in various drivers. - Avoid wrong kernel-doc marking on comment blocks. - Fix various other minor kernel-doc issues shown by W=1 * core - Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts. - Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0 - Add unit tests for iio_format_value() * docs - Fix formatting/typos in iio_configfs.rst and buffers.rst - Add documentation of index in buffers.rst - Fix scan element description - Avoid some issues with HTML generation from ABI docs by moving duplicated defintions to more generic files. - Drop reference to long dead mailing list. * 104-quad - Remove left over deprecated IIO counter ABI. * adi,adi-axi-adc - Fix wrong bit of docs. * adi,ad5791 - Typos * adi,ad9834 - Switch to device managed functions in probe. * adi,adis* - Add and use helpers for locking to reduced duplication. * adi,adis16480 - Fix calculation of sampling frequency when using pulse per second input. * adi,adis16475 - Calculate the IMU scaled internal sampling rate and runtime depending on sysfs based configuration rather than getting from DT. Drop now unnecessary property from DT bindings doc. * cros_ec - Fix result of a series of recent changes that means extended buffer attributes turn up in the wrong place. Too complex to revert the various patches unfortunately so this is a bit messy. * fsl,mma3452 - Indentation cleanup. * hid-sensors - Size of storage needs to increase for some parts when using quaternions. - Move the get sensistivity attribute to hid-sensors-common to reduce duplication. Enable it for more device types. - Correctly handle relative sensitivity if reported that way including documenting the new ABI. * maxim,max517 - Use device managed functions in probe. * mediatek,mt6360-adc - Use asm/unaligned.h instead of directly including unaligned/be_byteshift.h * novuton,npcm-adc - Local lock instead of missusing mlock. * semtech,sx9500 - Typos * st,sensor - typo fix * st,spear-adc - Local lock instead of missusing mlock. * st,stm32-adc - Long standing HAS_IOMEM dependency fix. * st,stm32-counter - Remove left over deprecated IIO counter ABI. * ti,palmas-adc - Local lock instead of missusing mlock. * ti,tmp007 - Switch to device managed functions in probe. Other * MAINTAINERS - Move Peter Meerwald-Stadler to Credits at his request * tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (119 commits) iio: acpi_als: Add trigger support iio: acpi_als: Add local variable dev in probe iio: acpi_als: Add timestamp channel iio: adc: ad7292: Modify the bool initialization assignment iio: cros: unify hw fifo attributes without API changes iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant iio: event_monitor: Enable events before monitoring dt-bindings: iio: adc: Add compatible for Mediatek MT8195 iio:magnetometer: Add Support for ST IIS2MDC dt-bindings: iio: st,st-sensors add IIS2MDC. staging: iio: ad9832: kernel-doc fixes iio:dac:max517.c: Use devm_iio_device_register() iio:cros_ec_sensors: Fix a wrong function name in kernel doc. iio: buffer: kfifo_buf: kernel-doc, typo in function name. iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names. iio: adc: adi-axi-adc: Drop false marking for kernel-doc iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name iio: dac: ad5504: fix wrong part number in kernel-doc structure name. iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name iio: adc: ti-adc084s021: kernel-doc fixes, missing function names ...
2021-03-26x509: Add OID for NIST P384 and extend parser for itSaulo Alessandre1-0/+1
Prepare the x509 parser to accept NIST P384 certificates and add the OID for ansip384r1, which is the identifier for NIST P384. Summary of changes: * crypto/asymmetric_keys/x509_cert_parser.c - prepare x509 parser to load NIST P384 * include/linux/oid_registry.h - add OID_ansip384r1 Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26x509: Add support for parsing x509 certs with ECDSA keysStefan Berger1-0/+2
Add support for parsing of x509 certificates that contain ECDSA keys, such as NIST P256, that have been signed by a CA using any of the current SHA hash algorithms. Cc: David Howells <dhowells@redhat.com> Cc: keyrings@vger.kernel.org Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26x509: Detect sm2 keys by their parameters OIDStefan Berger1-0/+1
Detect whether a key is an sm2 type of key by its OID in the parameters array rather than assuming that everything under OID_id_ecPublicKey is sm2, which is not the case. Cc: David Howells <dhowells@redhat.com> Cc: keyrings@vger.kernel.org Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26oid_registry: Add OIDs for ECDSA with SHA224/256/384/512Stefan Berger1-1/+5
Add OIDs for ECDSA with SHA224/256/384/512. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-13 21:24:07 +0300