| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc8, including fixes from netfilter, and
bpf. BPF verifier changes stand out, otherwise things have slowed
down.
Current release - regressions:
- gro: ensure frag0 meets IP header alignment
- Revert "net: stmmac: re-init rx buffers when mac resume back"
- ethernet: macb: fix the restore of cmp registers
Previous releases - regressions:
- ixgbe: Fix NULL pointer dereference in ethtool loopback test
- ixgbe: fix unbalanced device enable/disable in suspend/resume
- phy: marvell: fix detection of PHY on Topaz switches
- make tcp_allowed_congestion_control readonly in non-init netns
- xen-netback: Check for hotplug-status existence before watching
Previous releases - always broken:
- bpf: mitigate a speculative oob read of up to map value size by
tightening the masking window
- sctp: fix race condition in sctp_destroy_sock
- sit, ip6_tunnel: Unregister catch-all devices
- netfilter: nftables: clone set element expression template
- netfilter: flowtable: fix NAT IPv6 offload mangling
- net: geneve: check skb is large enough for IPv4/IPv6 header
- netlink: don't call ->netlink_bind with table lock held"
* tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
netlink: don't call ->netlink_bind with table lock held
MAINTAINERS: update my email
bpf: Update selftests to reflect new error states
bpf: Tighten speculative pointer arithmetic mask
bpf: Move sanitize_val_alu out of op switch
bpf: Refactor and streamline bounds check into helper
bpf: Improve verifier error messages for users
bpf: Rework ptr_limit into alu_limit and add common error path
bpf: Ensure off_reg has no mixed signed bounds for all types
bpf: Move off_reg into sanitize_ptr_alu
bpf: Use correct permission flag for mixed signed bounds arithmetic
ch_ktls: do not send snd_una update to TCB in middle
ch_ktls: tcb close causes tls connection failure
ch_ktls: fix device connection close
ch_ktls: Fix kernel panic
i40e: fix the panic when running bpf in xdpdrv mode
net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta
net/mlx5e: Fix setting of RS FEC mode
net/mlx5: Fix setting of devlink traps in switchdev mode
Revert "net: stmmac: re-init rx buffers when mac resume back"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"The largest change is for a regression that landed during -rc1 for
block-device read-only handling. Vaibhav found a new use for the
ability (originally introduced by virtio_pmem) to call back to the
platform to flush data, but also found an original bug in that
implementation. Lastly, Arnd cleans up some compile warnings in dax.
This has all appeared in -next with no reported issues.
Summary:
- Fix a regression of read-only handling in the pmem driver
- Fix a compile warning
- Fix support for platform cache flush commands on powerpc/papr"
* tag 'libnvdimm-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC
libnvdimm: Notify disk drivers to revalidate region read-only
dax: avoid -Wempty-body warnings
|
|
Yank out the hva-based MMU notifier APIs now that all architectures that
use the notifiers have moved to the gfn-based APIs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the hva->gfn lookup for MMU notifiers into common code. Every arch
does a similar lookup, and some arch code is all but identical across
multiple architectures.
In addition to consolidating code, this will allow introducing
optimizations that will benefit all architectures without incurring
multiple walks of the memslots, e.g. by taking mmu_lock if and only if a
relevant range exists in the memslots.
The use of __always_inline to avoid indirect call retpolines, as done by
x86, may also benefit other architectures.
Consolidating the lookups also fixes a wart in x86, where the legacy MMU
and TDP MMU each do their own memslot walks.
Lastly, future enhancements to the memslot implementation, e.g. to add an
interval tree to track host address, will need to touch far less arch
specific code.
MIPS, PPC, and arm64 will be converted one at a time in future patches.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
memslots are stored in RCU and there should be no need to
change them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the prototypes for the MMU notifier callbacks out of arch code and
into common code. There is no benefit to having each arch replicate the
prototypes since any deviation from the invocation in common code will
explode.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Most devices maintain RMON (RFC 2819) stats - particularly
the "histogram" of packets received by size. Unlike other
RFCs which duplicate IEEE stats, the short/oversized frame
counters in RMON don't seem to match IEEE stats 1-to-1 either,
so expose those, too. Do not expose basic packet, CRC errors
etc - those are already otherwise covered.
Because standard defines packet ranges only up to 1518, and
everything above that should theoretically be "oversized"
- devices often create their own ranges.
Going beyond what the RFC defines - expose the "histogram"
in the Tx direction (assume for now that the ranges will
be the same).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Number of devices maintains the standard-based MAC control
counters for control frames. Add a API for those.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of the MAC statistics are included in
struct rtnl_link_stats64, but some fields
are aggregated. Besides it's good to expose
these clearly hardware stats separately.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an interface for reading standard stats, including
stats which don't have a corresponding control interface.
Start with IEEE 802.3 PHY stats. There seems to be only
one stat to expose there.
Define API to not require user space changes when new
stats or groups are added. Groups are based on bitset,
stats have a string set associated.
v1: wrap stats in a nest
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-04-16
This patchset introduces updates to mlx5e netdev driver.
1) Tariq refactors TLS offloads and adds resiliency against RX resync
failures
2) Maxim reduces code duplications by unifying channels reset flow
regardless if channels are closed or open
3) Aya Enhances TX/RX health reporters diagnostics to expose the
internal clock time-stamping format
4) Moshe adds support for ethtool extended link state, to show the reason
for link down
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885a8 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This change introduces initial support for a WWAN framework. Given the
complexity and heterogeneity of existing WWAN hardwares and interfaces,
there is no strict definition of what a WWAN device is and how it should
be represented. It's often a collection of multiple devices that perform
the global WWAN feature (netdev, tty, chardev, etc).
One usual way to expose modem controls and configuration is via high
level protocols such as the well known AT command protocol, MBIM or
QMI. The USB modems started to expose them as character devices, and
user daemons such as ModemManager learnt to use them.
This initial version adds the concept of WWAN port, which is a logical
pipe to a modem control protocol. The protocols are rawly exposed to
user via character device, allowing straigthforward support in existing
tools (ModemManager, ofono...). The WWAN core takes care of the generic
part, including character device management, and relies on port driver
operations to receive/submit protocol data.
Since the different devices exposing protocols for a same WWAN hardware
do not necessarily know about each others (e.g. two different USB
interfaces, PCI/MHI channel devices...) and can be created/removed in
different orders, the WWAN core ensures that all WAN ports contributing
to the 'whole' WWAN feature are grouped under the same virtual WWAN
device, relying on the provided parent device (e.g. mhi controller,
USB device). It's a 'trick' I copied from Johannes's earlier WWAN
subsystem proposal.
This initial version is purposely minimalist, it's essentially moving
the generic part of the previously proposed mhi_wwan_ctrl driver inside
a common WWAN framework, but the implementation is open and flexible
enough to allow extension for further drivers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The timecounter is not modified in this function. Mark it as const.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210303103544.994855-1-mkl@pengutronix.de
|
|
Add needed structure layouts and defines for pddr register
(Port Diagnostics Database Register) and the troublshooting page.
This will be used to get extended link state from the monitor opcode
bits.
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The write buffer comes from user and should be const.
Constify write buffer in mtd core and across all _write_user_prot_reg()
users. cfi_cmdset_{0001, 0002} and onenand_base will pay the cost of an
explicit cast to discard the const qualifier since the beginning, since
they are using an otp_op_t function prototype that is used for both reads
and writes. mtd_dataflash and SPI NOR will benefit of the const buffer
because they are using different paths for writes and reads.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210403060931.7119-1-tudor.ambarus@microchip.com
|
|
This patch adds a new software event to count context switches
involving cgroup switches. So it's counted only if cgroups of
previous and next tasks are different. Note that it only checks the
cgroups in the perf_event subsystem. For cgroup v2, it shouldn't
matter anyway.
One can argue that we can do this by using existing sched_switch event
with eBPF. But some systems might not have eBPF for some reason so
I'd like to add this as a simple way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210210083327.22726-2-namhyung@kernel.org
|
|
In some cases, we need to check more than whether the software event
is enabled. So split the condition check and the actual event
handling. This is a preparation for the next change.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210210083327.22726-1-namhyung@kernel.org
|
|
The PCIe controller in Tegra194 SoC is not ECAM-compliant. With the
current hardware design, ECAM can be enabled only for one controller (the
C5 controller) with bus numbers starting from 160 instead of 0. A different
approach is taken to avoid this abnormal way of enabling ECAM for just one
controller but to enable configuration space access for all the other
controllers. In this approach, ops are added through MCFG quirk mechanism
which access the configuration spaces by dynamically programming iATU
(internal AddressTranslation Unit) to generate respective configuration
accesses just like the way it is done in DesignWare core sub-system.
This issue is specific to Tegra194 and it would be fixed in the future
generations of Tegra SoCs.
Link: https://lore.kernel.org/r/20210416134537.19474-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
It happens that the 3 drivers which first supported being modular are
also ones which play games with their pgsize_bitmap, so have non-const
iommu_ops where dynamically setting the owner manages to work out OK.
However, it's less than ideal to force that upon all drivers which want
to be modular - like the new sprd-iommu driver which now has a potential
bug in that regard - so let's just statically set the module owner and
let ops remain const wherever possible.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/31423b99ff609c3d4b291c701a7a7a810d9ce8dc.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Implement debugfs_create_str() to easily display names and such in
debugfs.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.415407080@infradead.org
|
|
Stop polluting sysctl with undocumented knobs that really are debug
only, move them all to /debug/sched/ along with the existing
/debug/sched_* files that already exist.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.287610138@infradead.org
|
|
Introduce a cpumask that indicates (for each CPU) what direction the
CPU hotplug is currently going. Notably, it tracks rollbacks. Eg. when
an up fails and we do a roll-back down, it will accurately reflect the
direction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210310150109.151441252@infradead.org
|
|
Prepare for addition of another mask. Primarily a code movement to
avoid having to create more #ifdef, but while there, convert
everything with an argument to an inline function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210310150109.045447765@infradead.org
|
|
Adds bit perf_event_attr::sigtrap, which can be set to cause events to
send SIGTRAP (with si_code TRAP_PERF) to the task where the event
occurred. The primary motivation is to support synchronous signals on
perf events in the task where an event (such as breakpoints) triggered.
To distinguish perf events based on the event type, the type is set in
si_errno. For events that are associated with an address, si_addr is
copied from perf_sample_data.
The new field perf_event_attr::sig_data is copied to si_perf, which
allows user space to disambiguate which event (of the same type)
triggered the signal. For example, user space could encode the relevant
information it cares about in sig_data.
We note that the choice of an opaque u64 provides the simplest and most
flexible option. Alternatives where a reference to some user space data
is passed back suffer from the problem that modification of referenced
data (be it the event fd, or the perf_event_attr) can race with the
signal being delivered (of course, the same caveat applies if user space
decides to store a pointer in sig_data, but the ABI explicitly avoids
prescribing such a design).
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/lkml/YBv3rAT566k+6zjg@hirez.programming.kicks-ass.net/
|
|
Introduces the TRAP_PERF si_code, and associated siginfo_t field
si_perf. These will be used by the perf event subsystem to send signals
(if requested) to the task where an event occurred.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de> # asm-generic
Link: https://lkml.kernel.org/r/20210408103605.1676875-6-elver@google.com
|
|
Adds bit perf_event_attr::inherit_thread, to restricting inheriting
events only if the child was cloned with CLONE_THREAD.
This option supports the case where an event is supposed to be
process-wide only (including subthreads), but should not propagate
beyond the current process's shared environment.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YBvj6eJR%2FDY2TsEB@hirez.programming.kicks-ass.net/
|
|
Make perf_event_exit_event() more robust, such that we can use it from
other contexts. Specifically the up and coming remove_on_exec.
For this to work we need to address a few issues. Remove_on_exec will
not destroy the entire context, so we cannot rely on TASK_TOMBSTONE to
disable event_function_call() and we thus have to use
perf_remove_from_context().
When using perf_remove_from_context(), there's two races to consider.
The first is against close(), where we can have concurrent tear-down
of the event. The second is against child_list iteration, which should
not find a half baked event.
To address this, teach perf_remove_from_context() to special case
!ctx->is_active and about DETACH_CHILD.
[ elver@google.com: fix racing parent/child exit in sync_child_event(). ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-2-elver@google.com
|
|
Commit 01e99aeca39796003 ("blk-mq: insert passthrough request into
hctx->dispatch directly") gives high priority to passthrough requests and
bypass underlying IO scheduler. But as we allocate tag for such request it
still runs io-scheduler's callback limit_depth, while we really want is to
give full sbitmap-depth capabity to such request for acquiring available
tag.
blktrace shows PC requests(dmraid -s -c -i) hit bfq's limit_depth:
8,0 2 0 0.000000000 39952 1,0 m N bfq [bfq_limit_depth] wr_busy 0 sync 0 depth 8
8,0 2 1 0.000008134 39952 D R 4 [dmraid]
8,0 2 2 0.000021538 24 C R [0]
8,0 2 0 0.000035442 39952 1,0 m N bfq [bfq_limit_depth] wr_busy 0 sync 0 depth 8
8,0 2 3 0.000038813 39952 D R 24 [dmraid]
8,0 2 4 0.000044356 24 C R [0]
This patch introduce a new wrapper to make code not that ugly.
Signed-off-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210415033920.213963-1-linf@wangsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
receive_fd_replace shares almost no code with the general case, so split
it out. Also remove the "Bump the sock usage counts" comment from
both copies, as that is now what __receive_sock actually does.
[AV: ... and make the only user of receive_fd_replace() choose between
it and receive_fd() according to what userland had passed to it in
flags]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Similarly to pause statistics add stats for FEC.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
where block is a block of bits FEC operates on.
Each of these counters is defined per lane (PCS instance).
Multiple vendors provide number of corrected _bits_ rather
than/as well as blocks.
This set adds the 2 standard-based block counters and a extra
one for corrected bits.
Counters are exposed to user space via netlink in new attributes.
Each attribute carries an array of u64s, first element is
the total count, and the following ones are a per-lane break down.
Much like with pause stats the operation will not fail when driver
does not implement the get_fec_stats callback (nor can the driver
fail the operation by returning an error). If stats can't be
reported the relevant attributes will be empty.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We'll need it for FEC stats as well.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
MTD core:
* Handle possible -EPROBE_DEFER from parse_mtd_partitions()
NAND core:
* Fix error handling in nand_prog_page_op() (x2)
* Add a helper to retrieve the number of ECC bytes per step
* Add a helper to retrieve the number of ECC steps
* Let ECC engines advertize the exact number of steps
* ECC Hamming:
- Populate the public nsteps field
- Use the public nsteps field
* ECC BCH:
- Populate the public nsteps field
- Use the public nsteps field
Raw NAND core:
* Add support for secure regions in NAND memory
* Try not to use the ECC private structures
* Remove duplicate include in rawnand.h
* BBT:
- Skip bad blocks when searching for the BBT in NAND
Raw NAND controller drivers:
* Qcom:
- Convert bindings to YAML
- Use dma_mapping_error() for error check
- Add missing nand_cleanup() in error path
- Return actual error code instead of -ENODEV
- Update last code word register
- Add helper to configure location register
- Rename parameter name in macro
- Add helper to check last code word
- Convert nandc to chip in Read/Write helper
- Update register macro name for 0x2c offset
* GPMI:
- Fix a double free in gpmi_nand_init
* Rockchip:
- Use flexible-array member instead of zero-length array
* Atmel:
- Update ecc_stats.corrected counter
* MXC:
- Remove unneeded of_match_ptr()
* R852:
- replace spin_lock_irqsave by spin_lock in hard IRQ
* Brcmnand:
- Move to polling in pio mode on oops write
- Read/write oob during EDU transfer
- Fix OOB R/W with Hamming ECC
* FSMC:
- Fix error code in fsmc_nand_probe()
* OMAP:
- Use ECC information from the generic structures
SPI-NAND core:
* Add missing MODULE_DEVICE_TABLE()
SPI-NAND drivers:
* gigadevice: Support GD5F1GQ5UExxG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
SPI NOR core changes:
- Add OTP support
- Fix module unload while an op in progress
- Add various cleanup patches
SPI NOR controller drivers changes:
- intel-spi: Move platform data header to x86 subfolder
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.13
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Provide the missing dummy bug_get_file_line() implementation when
GENENERIC_BUG isn't selected.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 26dbc7e299c7 ("bug: Factor out a getter for a bug's file line")
Cc: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* for-next/mte-async-kernel-mode:
: Add MTE asynchronous kernel mode support
kasan, arm64: tests supports for HW_TAGS async mode
arm64: mte: Report async tag faults before suspend
arm64: mte: Enable async tag check fault
arm64: mte: Conditionally compile mte_enable_kernel_*()
arm64: mte: Enable TCO in functions that can read beyond buffer limits
kasan: Add report for async mode
arm64: mte: Drop arch_enable_tagging()
kasan: Add KASAN mode kernel parameter
arm64: mte: Add asynchronous mode support
|
|
'for-next/vdso', 'for-next/fiq', 'for-next/epan', 'for-next/kasan-vmalloc', 'for-next/fgt-boot-init', 'for-next/vhe-only' and 'for-next/neon-softirqs-disabled', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* for-next/misc:
: Miscellaneous patches
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64/sve: Remove redundant system_supports_sve() tests
arm64: mte: Remove unused mte_assign_mem_tag_range()
arm64: Add __init section marker to some functions
arm64/sve: Rework SVE access trap to convert state in registers
docs: arm64: Fix a grammar error
arm64: smp: Add missing prototype for some smp.c functions
arm64: setup: name `tcr` register
arm64: setup: name `mair` register
arm64: stacktrace: Move start_backtrace() out of the header
arm64: barrier: Remove spec_bar() macro
arm64: entry: remove test_irqs_unmasked macro
ARM64: enable GENERIC_FIND_FIRST_BIT
arm64: defconfig: Use DEBUG_INFO_REDUCED
* for-next/kselftest:
: Various kselftests for arm64
kselftest: arm64: Add BTI tests
kselftest/arm64: mte: Report filename on failing temp file creation
kselftest/arm64: mte: Fix clang warning
kselftest/arm64: mte: Makefile: Fix clang compilation
kselftest/arm64: mte: Output warning about failing compiler
kselftest/arm64: mte: Use cross-compiler if specified
kselftest/arm64: mte: Fix MTE feature detection
kselftest/arm64: mte: common: Fix write() warnings
kselftest/arm64: mte: user_mem: Fix write() warning
kselftest/arm64: mte: ksm_options: Fix fscanf warning
kselftest/arm64: mte: Fix pthread linking
kselftest/arm64: mte: Fix compilation with native compiler
* for-next/xntable:
: Add hierarchical XN permissions for all page tables
arm64: mm: use XN table mapping attributes for user/kernel mappings
arm64: mm: use XN table mapping attributes for the linear region
arm64: mm: add missing P4D definitions and use them consistently
* for-next/vdso:
: Minor improvements to the compat vdso and sigpage
arm64: compat: Poison the compat sigpage
arm64: vdso: Avoid ISB after reading from cntvct_el0
arm64: compat: Allow signal page to be remapped
arm64: vdso: Remove redundant calls to flush_dcache_page()
arm64: vdso: Use GFP_KERNEL for allocating compat vdso and signal pages
* for-next/fiq:
: Support arm64 FIQ controller registration
arm64: irq: allow FIQs to be handled
arm64: Always keep DAIF.[IF] in sync
arm64: entry: factor irq triage logic into macros
arm64: irq: rework root IRQ handler registration
arm64: don't use GENERIC_IRQ_MULTI_HANDLER
genirq: Allow architectures to override set_handle_irq() fallback
* for-next/epan:
: Support for Enhanced PAN (execute-only permissions)
arm64: Support execute-only permissions with Enhanced PAN
* for-next/kasan-vmalloc:
: Support CONFIG_KASAN_VMALLOC on arm64
arm64: Kconfig: select KASAN_VMALLOC if KANSAN_GENERIC is enabled
arm64: kaslr: support randomized module area with KASAN_VMALLOC
arm64: Kconfig: support CONFIG_KASAN_VMALLOC
arm64: kasan: abstract _text and _end to KERNEL_START/END
arm64: kasan: don't populate vmalloc area for CONFIG_KASAN_VMALLOC
* for-next/fgt-boot-init:
: Booting clarifications and fine grained traps setup
arm64: Require that system registers at all visible ELs be initialized
arm64: Disable fine grained traps on boot
arm64: Document requirements for fine grained traps at boot
* for-next/vhe-only:
: Dealing with VHE-only CPUs (a.k.a. M1)
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
arm64: cpufeature: Allow early filtering of feature override
* arm64/for-next/perf:
arm64: perf: Remove redundant initialization in perf_event.c
perf/arm_pmu_platform: Clean up with dev_printk
perf/arm_pmu_platform: Fix error handling
perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors
docs: perf: Address some html build warnings
docs: perf: Add new description on HiSilicon uncore PMU v2
drivers/perf: hisi: Add support for HiSilicon PA PMU driver
drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver
drivers/perf: hisi: Update DDRC PMU for programmable counter
drivers/perf: hisi: Add new functions for HHA PMU
drivers/perf: hisi: Add new functions for L3C PMU
drivers/perf: hisi: Add PMU version for uncore PMU drivers.
drivers/perf: hisi: Refactor code for more uncore PMUs
drivers/perf: hisi: Remove unnecessary check of counter index
drivers/perf: Simplify the SMMUv3 PMU event attributes
drivers/perf: convert sysfs sprintf family to sysfs_emit
drivers/perf: convert sysfs scnprintf family to sysfs_emit_at() and sysfs_emit()
drivers/perf: convert sysfs snprintf family to sysfs_emit
* for-next/neon-softirqs-disabled:
: Run kernel mode SIMD with softirqs disabled
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
|
|
There are a lot of tty-core-only functions that are listed in
include/linux/tty.h. Move them to drivers/tty/tty.h so that no one else
can accidentally call them or think that they are public functions.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The flow change and restricted_tty_write() logic is internal to the tty
core only, so move it out of the include/linux/tty.h file.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No one calls this outside of the tty_io.c file, so mark this static and
do not export the symbol anymore.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-11-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the TTY_LOCK_* enums and tty_ldisc lock functions out of the global
tty.h into the local header file to clean things up.
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions tty_audit_add_data() and tty_audit_tiocsti() are local to
the tty core code, and do not need to be in a "kernel-wide" header file
so move them to drivers/tty/tty.h
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are a number of functions and #defines in include/linux/tty.h that
do not belong there as they are private to the tty core code.
Create an initial drivers/tty/tty.h file and copy the odd "tty logging"
macros into it to seed the file with some initial things that we know
nothing outside of the tty core should be calling.
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210408125134.3016837-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-04-13
mlx5 core and netdev driver updates
1) E-Switch updates from Parav,
1.1) Devlink parameter to control mlx5 metadata enablement for E-Switch
1.2) Trivial cleanups for E-Switch code
1.3) Dynamically allocate vport steering namespaces only when required
2) From Jianbo, Use variably sized data structures for Software steering
3) Several minor cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
