summaryrefslogtreecommitdiff
path: root/include/linux/soc
AgeCommit message (Collapse)AuthorFilesLines
2018-08-23Merge tag 'armsoc-soc' of ↵Linus Torvalds1-11/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 32-bit SoC platform updates from Olof Johansson: "Most of the SoC updates in this cycle are cleanups and moves to more modern infrastructure: - Davinci was moved to common clock framework - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the keyboard interface (bitbanged AT keyboard via GPIO). - Removal of some stale code for Renesas platforms - Power management improvements for i.MX6LL" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits) ARM: uniphier: select RESET_CONTROLLER arm64: uniphier: select RESET_CONTROLLER ARM: uniphier: remove empty Makefile ARM: exynos: Clear global variable on init error path ARM: exynos: Remove outdated maintainer information ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15 ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill soc: r9a06g032: don't build SMP files for non-SMP config ARM: shmobile: Add the R9A06G032 SMP enabler driver ARM: at91: pm: configure wakeup sources for ULP1 mode ARM: at91: pm: add PMC fast startup registers defines ARM: at91: pm: Add ULP1 mode support ARM: at91: pm: Use ULP0 naming instead of slow clock ARM: hisi: handle of_iomap and fix missing of_node_put ARM: hisi: check of_iomap and fix missing of_node_put ARM: hisi: fix error handling and missing of_node_put ARM: mx5: Set the DBGEN bit in ARM_GPC register ARM: imx51: Configure M4IF to avoid visual artifacts ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll ARM: imx: fix i.MX6SLL build ...
2018-08-19Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteprocLinus Torvalds1-0/+4
Pull remoteproc updates from Bjorn Andersson: "This adds support for pre-start and post-shutdown hooks for remoteproc subdevices, refactors the Qualcomm Hexagon support to allow reuse between several drivers, makes authentication in the MDT file loader optional, migrates a few format strings to use %pK and migrates the Davinci driver to use the reset framework" * tag 'rproc-v4.19' of git://github.com/andersson/remoteproc: remoteproc/davinci: use the reset framework remoteproc/davinci: Mark error recovery as disabled remoteproc: st_slim: replace "%p" with "%pK" remoteproc: replace "%p" with "%pK" remoteproc: qcom: fix Q6V5_WCSS dependencies remoteproc: Reset table_ptr in rproc_start() failure paths remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote remoteproc: qcom q6v5: fix modular build remoteproc: Introduce prepare and unprepare for subdevices remoteproc: rename subdev probe and remove functions remoteproc: Make client initialize ops in rproc_subdev remoteproc: Make start and stop in subdev optional remoteproc: Rename subdev functions to start/stop remoteproc: qcom: Introduce Hexagon V5 based WCSS driver remoteproc: qcom: q6v5-pil: Use common q6v5 helpers remoteproc: qcom: adsp: Use common q6v5 helpers remoteproc: q6v5: Extract common resource handling remoteproc: qcom: mdt_loader: Make the firmware authentication optional
2018-08-14Merge tag 'pinctrl-v4.19-1' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v4.19: Core changes: - Augment pinctrl_generic_add_group() and pinmux_generic_add_function() to return the selector for the added group/function to the caller and augment (hopefully) all drivers to handle this New subdrivers: - Qualcomm PM8998 and PM8005 are supported in the SPMI pin control and GPIO driver - Intel Ice Lake PCH (platform controller hub) support - NXP (ex Freescale) i.MX8MQ support - Berlin AS370 support Improvements to drivers: - Support interrupts on the Ocelot pin controller - Add SPI pins to the Uniphier driver - Define a GPIO compatible per SoC in the Tegra driver - Push Tegra initialization down in the initlevels - Support external wakeup interrupts on the Exynos - Add generic clocks pins to the meson driver - Add USB and HSCIF pins for some Renesas PFC chips - Suspend/resume support in the armada-37xx - Interrupt support for the Actions Semiconductor S900 also known as "owl" - Correct the pin ordering in Cedarfork - Debugfs output for INTF in the mcp23s08 driver - Avoid divisions in context save/restore in pinctrl-single The rest is minor bug fixes or cleanups" * tag 'pinctrl-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (69 commits) pinctrl: nomadik: silence uninitialized variable warning pinctrl: axp209: Fix NULL pointer dereference after allocation pinctrl: samsung: Remove duplicated "wakeup" in printk pinctrl: ocelot: add support for interrupt controller pinctrl: intel: Don't shadow error code of gpiochip_lock_as_irq() pinctrl: berlin: fix 'pctrl->functions' allocation in berlin_pinctrl_build_state gpio: tegra: Move driver registration to subsys_init level pinctrl: tegra: Move drivers registration to arch_init level pinctrl: baytrail: actually print the apparently misconfigured pin MAINTAINERS: Replace Heikki as maintainer of Intel pinctrl pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show() pinctrl: uniphier: add spi pin-mux settings pinctrl: cannonlake: Fix community ordering for H variant pinctrl: tegra: define GPIO compatible node per SoC pinctrl: intel: Do pin translation when lock IRQ pinctrl: imx: off by one in imx_pinconf_group_dbg_show() pinctrl: mediatek: include chained_irq.h header pinctrl/amd: only handle irq if it is pending and unmasked pinctrl/amd: fix gpio irq level in debugfs pinctrl: stm32: add syscfg mask parameter ...
2018-07-24pinctrl: samsung: Write external wakeup interrupt maskKrzysztof Kozlowski1-0/+2
The pinctrl driver defines an IRQ chip which handles external wakeup interrupts, therefore from logical point of view, it is the owner of external interrupt mask. The register controlling the mask belongs to Power Management Unit address space so it has to be accessed with PMU syscon regmap handle. This mask should be written to hardware during system suspend. Till now ARMv7 machine code was responsible for this which created a dependency between pin controller driver and arch/arm/mach code. Try to rework this dependency so the pinctrl driver will write external wakeup interrupt mask during late suspend. Impact on ARMv7 designs (S5Pv210 and Exynos) ============================================ This duplicates setting mask with existing machine code arch/arm/mach-exynos/suspend.c and arch/arm/mach-s5pv210/pm.c but it is not a problem - the wakeup mask register will be written twice. The machine code will be cleaned up later. The difference between implementation here and ARMv7 machine code (arch/arm/mach-*) is the time of writing the mask: 1. The machine code is writing the mask quite late during system suspend path, after offlining secondary CPUs and just before doing actual suspend. 2. The implementation in pinctrl driver uses late suspend ops, therefore it will write the mask much earlier. Hopefully late enough, after all drivers will enable or disable their interrupt wakeups (enable_irq_wake() etc). Impact on ARMv8 designs (Exynos5433 and Exynos7) ================================================ The Suspend to RAM was not supported and external wakeup interrupt mask was not written to HW. This change brings us one step closer to supporting Suspend to RAM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-07-24ARM: exynos: Define EINT_WAKEUP_MASK registers for S5Pv210 and Exynos5433Krzysztof Kozlowski1-1/+5
S5Pv210 and Exynos5433/Exynos7 have different address of EINT_WAKEUP_MASK register. Rename existing S5P_EINT_WAKEUP_MASK to avoid confusion and add new ones. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-07-21drivers: soc: Add LLCC driverRishabh Bhatnagar1-0/+180
LLCC (Last Level Cache Controller) provides additional cache memory in the system. LLCC is partitioned into multiple slices and each slice gets its own priority, size, ID and other config parameters. LLCC driver programs these parameters for each slice. Clients that are assigned to use LLCC need to get information such size & ID of the slice they get and activate or deactivate the slice as needed. LLCC driver provides API for the clients to perform these operations. Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-06-19remoteproc: qcom: mdt_loader: Make the firmware authentication optionalSricharan R1-0/+4
qcom_mdt_load function loads the mdt type firmware and initialises the secure memory as well. Make the initialisation only when requested by the caller, so that the function can be used by self-authenticating remoteproc as well. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-18soc: renesas: rcar-sysc: Drop legacy handlingGeert Uytterhoeven1-11/+0
Now the R-Car platform code no longer supports DTBs lacking a SYSC device node in DT, all legacy handling can be dropped from the R-Car SYSC driver: - Make rcar_sysc_ch private to the driver, - Make rcar_sysc_power_{down,up}() static (they have been replaced by rcar_sysc_power_{down,up}_cpu()), - Remove the legacy wrapper rcar_sysc_init(), and the check for double initialization (only the early_initcall is left). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-18soc: renesas: rcar-sysc: Provide helpers to power up/down CPUsGeert Uytterhoeven1-0/+2
Provide helpers to control CPU power areas from platform code, taking just a CPU index. This will avoid having to pass full CPU power area parameter blocks, and thus duplicating information already provided by SoC-specific SYSC drivers. This will be used on R-Car H1 only. Later R-Car generations rely on APMU/RST for CPU power area control. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-12Merge tag 'armsoc-late' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...
2018-06-12Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits) ARM: tegra: fix compile-testing PCI host driver soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers ...
2018-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-0/+13
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-05-25soc: qcom: smem: introduce qcom_smem_virt_to_phys()Alex Elder1-0/+2
Create function qcom_smem_virt_to_phys(), which returns the physical address corresponding to a given SMEM item's virtual address. This feature is required for a driver that will soon be out for review. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-11soc: qcom: Add APR bus driverSrinivas Kandagatla1-0/+128
This patch adds support to APR bus (Asynchronous Packet Router) driver. APR driver is made as a bus driver so that the apr devices can added removed more dynamically depending on the state of the services on the dsp. APR is used for communication between application processor and QDSP to use services on QDSP like Audio and others. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org> Acked-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-05firmware: ti_sci: Switch to SPDX LicensingLokesh Vutla1-9/+1
Switch to SPDX licensing and drop the GPL text which comes redundant. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2018-04-19soc: ti: K2G: provide APIs to support driver probe deferralMurali Karicheri2-0/+13
This patch provide APIs to allow client drivers to support probe deferral. On K2G SoC, devices can be probed only after the ti_sci_pm_domains driver is probed and ready. As drivers may get probed at different order, any driver that depends on knav dma and qmss drivers, for example netcp network driver, needs to defer probe until knav devices are probed and ready to service. To do this, add an API to query the device ready status from the knav dma and qmss devices. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-10Merge tag 'rproc-v4.17' of git://github.com/andersson/remoteprocLinus Torvalds1-1/+2
Pull remoteproc updates from Bjorn Andersson: - add support for generating coredumps for remoteprocs using devcoredump - add the Qualcomm sysmon driver for intra-remoteproc crash handling - a number of fixes in Qualcomm and IMX drivers * tag 'rproc-v4.17' of git://github.com/andersson/remoteproc: remoteproc: fix null pointer dereference on glink only platforms soc: qcom: qmi: add CONFIG_NET dependency remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()' remoteproc: imx_rproc: Re-use existing error handling path in 'imx_rproc_probe()' remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()' samples: Introduce Qualcomm QMI sample client remoteproc: qcom: Introduce sysmon remoteproc: Pass type of shutdown to subdev remove remoteproc: qcom: Register segments for core dump soc: qcom: mdt-loader: Return relocation base remoteproc: Rename "load_rsc_table" to "parse_fw" remoteproc: Add remote processor coredump support remoteproc: Remove null character write of shared mem
2018-04-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-9/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable amlogic: meson-gx-socinfo: Update soc ids soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings cpufreq: scmi: add thermal dependency soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC ...
2018-03-28regulator: qcom: smd: Add pm8998 and pmi8998 regulatorsBjorn Andersson1-0/+1
Add the pm8998 and pmi8998 regulators as used in the MSM8998 platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-27Merge tag 'v4.16-next-soc' of ↵Arnd Bergmann1-0/+4
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers Pull "ARM: mediatek: updates for soc drivers for v4.16-next" from Matthias Brugger: scpsy: - mt2712: update power domains to reflect design changes in the SoC - fix initialisation of power subdomains - add support for mt7623a SoC - use defines for mt2701 bus protection mask * tag 'v4.16-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
2018-03-12soc: mediatek: avoid hardcoded value with bus_prot_maskSean Wang1-0/+4
use a meaningful definition for bus_prot_mask instead of just hardcoded for it. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-02-12soc: qcom: mdt-loader: Return relocation baseBjorn Andersson1-1/+2
In order to implement support for grabbing core dumps in remoteproc it's necessary to know the relocated base of the image, as the offsets from the virtual memory base might not be based on the physical address. Return the adjusted physical base address to the caller. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12soc: samsung: Add SPDX license identifiers to headersKrzysztof Kozlowski2-9/+2
Replace GPL license statements with SPDX GPL-2.0 license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-02Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-6/+271
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "A number of new drivers get added this time, along with many low-priority bugfixes. The most interesting changes by subsystem are: bus drivers: - Updates to the Broadcom bus interface driver to support newer SoC types - The TI OMAP sysc driver now supports updated DT bindings memory controllers: - A new driver for Tegra186 gets added - A new driver for the ti-emif sram, to allow relocating suspend/resume handlers there SoC specific: - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs - A new driver for power domains on the actions S700 SoC - A driver for the Xilinx Zynq VCU logicoreIP reset controllers: - A new driver for Amlogic Meson-AGX - various bug fixes tee subsystem: - A new user interface got added to enable asynchronous communication with the TEE supplicant. - A new method of using user space memory for communication with the TEE is added" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits) of: platform: fix OF node refcount leak soc: fsl: guts: Add a NULL check for devm_kasprintf() bus: ti-sysc: Fix smartreflex sysc mask psci: add CPU_IDLE dependency soc: xilinx: Fix Kconfig alignment soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu soc: bcm: brcmstb: Be multi-platform compatible soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms Revert "soc: brcmstb: Only register SoC device on STB platforms" bus: omap: add MODULE_LICENSE tags soc: brcmstb: Only register SoC device on STB platforms tee: shm: Potential NULL dereference calling tee_shm_register() soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver soc: xilinx: Create folder structure for soc specific drivers of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: samsung: Add SPDX license identifiers soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() tee: shm: don't put_page on null shm->pages ...
2018-01-05Merge tag 'qcom-drivers-for-4.16' of ↵Arnd Bergmann1-0/+271
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Pull "Qualcomm ARM Based Driver Updates for v4.16 - Redo" from Andy Gross: * Fix error handling code in SMP2P probe * Update SMP2P to use ACPS as mailbox client * Add QMI support * Fixups for Qualcomm SCM * Fix licensing on rmtfs_mem * Correct SMSM child node lookup * Populate firmware nodes during platform init * tag 'qcom-drivers-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux: of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() soc: qcom: Introduce QMI helpers soc: qcom: Introduce QMI encoder/decoder firmware: qcom_scm: Add dependent headers to qcom_scm.h soc: qcom: smp2p: Access APCS as mailbox client soc: qcom: rmtfs_mem: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE soc: qcom: smsm: fix child-node lookup firmware: qcom_scm: drop redandant of_platform_populate
2017-12-21soc: mediatek: extend bus protection APIweiyi.lu@mediatek.com1-3/+4
MT2712 add "set/clear" bus control register to each control register set instead of providing only one "enable" control register, we could avoid the read-modify-write racing by declaring "bus_prot_reg_update" as "false" in scp_soc_data or declaring as "true" to use the legacy update method. By improving the mtk-infracfg bus protection implementation to support set/clear bus protection control method by IC configuration. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-12-21soc: brcmstb: biuctrl: Move to early_initcallFlorian Fainelli1-6/+0
Being called during early_initcall() is early enough that it occurs before SMP initialization, which is all we care about for the Bus Interface Unit configuration. This solves lack of BIU initialization on ARM64 platforms where we do not have an anchor where to put the BIU initialization (since there are no machine descriptors). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-21soc: qcom: Introduce QMI helpersBjorn Andersson1-0/+165
Drivers that needs to communicate with a remote QMI service all has to perform the operations of discovering the service, encoding and decoding the messages and operate the socket. This introduces an abstraction for these common operations, reducing most of the duplication in such cases. Acked-by: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-21soc: qcom: Introduce QMI encoder/decoderBjorn Andersson1-0/+106
Add the helper library for encoding and decoding QMI encoded messages. The implementation is taken from lib/qmi_encdec.c of the Qualcomm kernel (msm-3.18). Modifications has been made to the public API, source buffers has been made const and the debug-logging part was omitted, for now. Acked-by: Chris Lew <clew@codeaurora.org> Tested-by: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-11-18Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ...
2017-11-14Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman10-0/+10
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02clk: qcom: clk-smd-rpm: add msm8996 rpmclksRajendra Nayak1-0/+4
Add all RPM controlled clocks on msm8996 platform [srini: Fixed various issues with offsets and made names specific to msm8996] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-10-03soc: brcmstb: Add Product ID and Family ID helper functionsAl Cooper1-0/+17
Add Product ID and Family ID helper functions for brcmstb soc. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
2017-09-05soc: ti/knav_dma: include dmaengine headerArnd Bergmann1-0/+2
A header file cleanup apparently caused a build regression with one driver using the knav infrastructure: In file included from drivers/net/ethernet/ti/netcp_core.c:30:0: include/linux/soc/ti/knav_dma.h:129:30: error: field 'direction' has incomplete type enum dma_transfer_direction direction; ^~~~~~~~~ drivers/net/ethernet/ti/netcp_core.c: In function 'netcp_txpipe_open': drivers/net/ethernet/ti/netcp_core.c:1349:21: error: 'DMA_MEM_TO_DEV' undeclared (first use in this function); did you mean 'DMA_MEMORY_MAP'? config.direction = DMA_MEM_TO_DEV; ^~~~~~~~~~~~~~ DMA_MEMORY_MAP drivers/net/ethernet/ti/netcp_core.c:1349:21: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/ti/netcp_core.c: In function 'netcp_setup_navigator_resources': drivers/net/ethernet/ti/netcp_core.c:1659:22: error: 'DMA_DEV_TO_MEM' undeclared (first use in this function); did you mean 'DMA_DESC_HOST'? config.direction = DMA_DEV_TO_MEM; As the header is no longer included implicitly through netdevice.h, we should include it in the header that references the enum. Fixes: 0dd5759dbb1c ("net: remove dmaengine.h inclusion from netdevice.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoCSean Wang1-0/+7
Add SCPSYS power domain driver for MT7622 SoC having four power domains which are respectively ETHSYS for Ethernet including embedded switch, WBSYS for WIFI and Bluetooth, HIF0SYS for PCI-E and SATA, and HIF1SYS for USB. Those functions could be selectively powered gated when the corresponding function is no longer to use in order to reach more minimal power dissipation. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-06-29Merge tag 'actions-drivers-for-4.13' of ↵Arnd Bergmann1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers Pull "Actions Semi SoC drivers for 4.13" from Andreas Färber: This adds clock source and power domain drivers for S500/S900. * tag 'actions-drivers-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating soc: actions: Add Owl SPS dt-bindings: power: Add Owl SPS power domains clocksource: owl: Add S900 support clocksource: Add Owl timer
2017-06-23soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gatingAndreas Färber1-0/+11
Allow the SMP code to reuse PM domain code for CPU2/CPU3 wakeup. Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-06-19Merge tag 'renesas-drivers-for-v4.13' of ↵Olof Johansson1-2/+1
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Renesas ARM Based SoC Drivers Updates for v4.13 * Rework Kconfig and Makefile logic * tag 'renesas-drivers-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: Rework Kconfig and Makefile logic Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-12soc: renesas: Rework Kconfig and Makefile logicGeert Uytterhoeven1-2/+1
The goals are to: - Allow precise control over and automatic selection of which (sub)drivers are used for which SoC, - Allow adding support for new SoCs easily, - Allow compile-testing of all (sub)drivers, - Keep driver selection logic in the subsystem-specific Kconfig, independent from the architecture-specific Kconfig (i.e. no "select" from arch/arm64/Kconfig.platforms), to avoid dependencies. This is implemented by: - Introducing Kconfig symbols for all drivers and sub-drivers, - Introducing the Kconfig symbol SOC_RENESAS, which is enabled automatically when building for a Renesas ARM platform, and which enables all required drivers without interaction of the user, based on SoC-specific ARCH_* symbols, - Allowing the user to enable any Kconfig symbol manually if COMPILE_TEST is enabled, - Using the new Kconfig symbols instead of the ARCH_* symbols to control compilation in the Makefile, - Always entering drivers/soc/renesas/ during the build. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-10Merge tag 'renesas-fixes-for-v4.12' of ↵Arnd Bergmann1-0/+5
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Renesas ARM Based SoC Fixes for v4.12" from Simon Horman: * Provide dummy rcar_rst_read_mode_pins() for compile-testing * tag 'renesas-fixes-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: Provide dummy rcar_rst_read_mode_pins() for compile-testing
2017-05-05Merge tag 'usb-4.12-rc1' of ↵Linus Torvalds1-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) staging: typec: Fairchild FUSB302 Type-c chip driver staging: typec: Type-C Port Controller Interface driver (tcpci) staging: typec: USB Type-C Port Manager (tcpm) usb: host: xhci: remove #ifdef around PM functions usb: musb: don't mark of_dev_auxdata as initdata usb: misc: legousbtower: Fix buffers on stack USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" usb: Make sure usb/phy/of gets built-in USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h usb: host: xhci: print correct command ring address usb: host: xhci: delete sp_dma_buffers for scratchpad usb: host: xhci: using correct specification chapter reference for DCBAAP xhci: switch to pci_alloc_irq_vectors usb: host: xhci-plat: set resume_quirk() for R-Car controllers usb: host: xhci-plat: add resume_quirk() usb: host: xhci-plat: enable clk in resume timing usb: host: plat: Enable xHCI plat runtime PM USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit USB: serial: constify static arrays usb: fix some references for /proc/bus/usb ...
2017-04-28soc: renesas: Provide dummy rcar_rst_read_mode_pins() for compile-testingGeert Uytterhoeven1-0/+5
If the R-Car RST driver is not included, compile-testing R-Car clock drivers fails with a link error: undefined reference to `rcar_rst_read_mode_pins' To fix this, provide a dummy version. Use the exact same test logic as in drivers/soc/renesas/Makefile, as there is no Kconfig symbol (yet) to control compilation of the R-Car RST driver. Fixes: 527c02f66d263d2e ("soc: renesas: Add R-Car RST driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-10phy: exynos: Use one define for enable bitKrzysztof Kozlowski1-1/+2
There is no need for separate defines for Exynos4 and Exynos5 phy enable bit and MIPI phy reset bits. In both cases there are the same so simplify it. This reduces number of defines and allows removal of one header file. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10phy: exynos-mipi-video: Use consistent method to address phy registersKrzysztof Kozlowski1-3/+1
Exynos4 MIPI phy registers are defined with macro calculating the offset for given phyN. Use the same method for Exynos5420 to be consistent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10phy: exynos5: Remove duplicated defines of PHY register definesKrzysztof Kozlowski1-0/+8
Phy drivers access PMU region through regmap provided by exynos-pmu driver. However there is no need to duplicate defines for PMU registers. Instead just use whatever is defined in exynos-regs-pmu.h. This reduces number of defines. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-04-10phy: exynos4: Remove duplicated defines of PHY register definesKrzysztof Kozlowski1-1/+8
Phy drivers access PMU region through regmap provided by exynos-pmu driver. However there is no need to duplicate defines for PMU registers. Instead just use whatever is defined in exynos-regs-pmu.h. Additionally MIPI PHY registers for Exynos5433 start from the same address as Exynos4 and Exynos5250 so re-use existing defines. This reduces number of defines and allows removal of one header file. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-03-29soc: qcom: smd: Remove standalone driverBjorn Andersson1-139/+0
Remove the standalone SMD implementation as we have transitioned the client drivers to use the RPMSG based one. Also remove all dependencies on QCOM_SMD from Kconfig files, in order to keep them selectable in the absence of the removed symbol. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-29soc: qcom: smd: Transition client drivers from smd to rpmsgBjorn Andersson1-4/+7
By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by: Andy Gross <andy.gross@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 11:26:48 +0300