| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
resctrl_arch_get_config() has no return, but does pass a single value
back via one of its arguments.
Return the value instead.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210811163831.14917-1-james.morse@arm.com
|
|
resctrl uses cbm_idx() to map a closid to an index in the configuration
array. This is based on a multiplier and offset that are held in the
resource.
To merge the resources, the resctrl arch code needs to calculate the
index from something else, as there will only be one resource.
Decide based on the staged configuration type. This makes the static
mult and offset parameters redundant.
[ bp: Remove superfluous brackets in get_config_index() ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-21-james.morse@arm.com
|
|
The ctrl_val[] array for a struct rdt_hw_resource only holds
configurations of one type. The type is implicit.
Once the CDP resources are merged, the ctrl_val[] array will hold all
the configurations for the hardware resource. When a particular type of
configuration is needed, it must be specified explicitly.
Pass the expected type from the schema into resctrl_arch_get_config().
Nothing uses this yet, but once a single ctrl_val[] array is used for
the three struct rdt_hw_resources that share hardware, the type will be
used to return the correct configuration value from the shared array.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-18-james.morse@arm.com
|
|
Functions like show_doms() reach into the architecture's private
structure to retrieve the configuration from the struct rdt_hw_resource.
The hardware configuration may look completely different to the
values resctrl gets from user-space. The staged configuration and
resctrl_arch_update_domains() allow the architecture to convert or
translate these values.
Resctrl shouldn't read or write the ctrl_val[] values directly. Add
a helper to read the current configuration. This will allow another
architecture to scale the bitmaps if necessary, and possibly use
controls that don't take the user-space control format at all.
Of the remaining functions that access ctrl_val[] directly,
apply_config() is part of the architecture-specific code, and is
called via resctrl_arch_update_domains(). reset_all_ctrls() will be an
architecture specific helper.
update_mba_bw() manipulates both ctrl_val[], mbps_val[] and the
hardware. The mbps_val[] that matches the mba_sc state of the resource
is changed, but the other is left unchanged. Abstracting this is the
subject of later patches that affect set_mba_sc() too.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-17-james.morse@arm.com
|
|
update_domains() merges the staged configuration changes into the arch
codes configuration array. Rename to make it clear it is part of the
arch code interface to resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-16-james.morse@arm.com
|
|
Before the CDP resources can be merged, struct rdt_domain will need an
array of struct resctrl_staged_config, one per type of configuration.
Use the type as an index to the array to ensure that a schema
configuration string can't specify the same domain twice. This will
allow two schemata to apply configuration changes to one resource.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-15-james.morse@arm.com
|
|
When configuration changes are made, the new value is written to struct
rdt_domain's new_ctrl field and the have_new_ctrl flag is set. Later
new_ctrl is copied to hardware by a call to update_domains().
Once the CDP resources are merged, there will be one new_ctrl field in
use by two struct resctrl_schema requiring a per-schema IPI to copy the
value to hardware.
Move new_ctrl and have_new_ctrl into a new struct resctrl_staged_config.
Before the CDP resources can be merged, struct rdt_domain will need an
array of these, one per type of configuration. Using the type as an
index to the array will ensure that a schema configuration string can't
specify the same domain twice.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-14-james.morse@arm.com
|
|
resctrl 'info' directories and schema parsing use the schema name.
This lives in the struct rdt_resource, and is specified by the
architecture code.
Once the CDP resources are merged, there will only be one resource (and
one name) in use by two schemata. To allow the CDP CODE/DATA property to
be the type of configuration the schema uses, the name should also be
per-schema.
Add a name field to struct resctrl_schema, and use this wherever
the schema name is exposed (or read from) user-space. Calculating
max_name_width for padding the schemata file also moves as this is
visible to user-space. As the names in struct rdt_resource already
include the CDP information, schemata_list_create() copies them.
schemata_list_create() includes the length of the CDP suffix when
calculating max_name_width in preparation for CDP resources being
merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-13-james.morse@arm.com
|
|
Whether CDP is enabled for a hardware resource like the L3 cache can be
found by inspecting the alloc_enabled flags of the L3CODE/L3DATA struct
rdt_hw_resources, even if they aren't in use.
Once these resources are merged, the flags can't be compared. Whether
CDP is enabled needs tracking explicitly. If another architecture is
emulating CDP the behaviour may not be per-resource. 'cdp_capable' needs
to be visible to resctrl, even if its not in use, as this affects the
padding of the schemata table visible to user-space.
Add cdp_enabled to struct rdt_hw_resource and cdp_capable to struct
rdt_resource. Add resctrl_arch_set_cdp_enabled() to let resctrl enable
or disable CDP on a resource. resctrl_arch_get_cdp_enabled() lets it
read the current state.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-12-james.morse@arm.com
|
|
Once the CDP resources are merged, there will be two struct
resctrl_schema for one struct rdt_resource. CDP becomes a type of
configuration that belongs to the schema.
Helpers like rdtgroup_cbm_overlaps() need access to the schema to query
the configuration (or configurations) based on schema properties.
Change these functions to take a struct schema instead of the struct
rdt_resource. All the modified functions are part of the filesystem code
that will move to /fs/resctrl once it is possible to support a second
architecture.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-10-james.morse@arm.com
|
|
To initialise struct resctrl_schema's num_closid, schemata_list_create()
reaches into the architectures private structure to retrieve num_closid
from the struct rdt_hw_resource. The 'half the closids' behaviour should
be part of the filesystem parts of resctrl that are the same on any
architecture. struct resctrl_schema's num_closid should include any
correction for CDP.
Having two properties called num_closid is likely to be confusing when
they have different values.
Add a helper to read the resource's num_closid from the arch code.
This should return the number of closid that the resource supports,
regardless of whether CDP is in use. Once the CDP resources are merged,
schemata_list_create() can apply the correction itself.
Using a type with an obvious size for the arch helper means changing the
type of num_closid to u32, which matches the type already used by struct
rdtgroup.
reset_all_ctrls() does not use resctrl_arch_get_num_closid(), even
though it sets up a structure for modifying the hardware. This function
will be part of the architecture code, the maximum closid should be the
maximum value the hardware has, regardless of the way resctrl is using
it. All the uses of num_closid in core.c are naturally part of the
architecture specific code.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-9-james.morse@arm.com
|
|
Struct resctrl_schema holds properties that vary with the style of
configuration that resctrl applies to a resource. There are already
two values for the hardware's num_closid, depending on whether the
architecture presents the L3 or L3CODE/L3DATA resources.
As the way CDP changes the number of control groups that resctrl can
create is part of the user-space interface, it should be managed by the
filesystem parts of resctrl. This allows the architecture code to only
describe the value the hardware supports.
Add num_closid to resctrl_schema. This is the value seen by the
filesystem, which may be different to the maximum value described by the
arch code when CDP is enabled.
These functions operate on the num_closid value that is exposed to
user-space:
* rdtgroup_parse_resource()
* rdtgroup_schemata_show()
* rdt_num_closids_show()
* closid_init()
Change them to use the schema value instead. schemata_list_create() sets
this value, and reaches into the architecture-specific structure to get
the value. This will eventually be replaced with a helper.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-8-james.morse@arm.com
|
|
The names of resources are used for the schema name presented to
user-space. The name used is rooted in a structure provided by the
architecture code because the names are different when CDP is enabled.
x86 implements this by swapping between two sets of resource structures
based on their alloc_enabled flag. The type of configuration in-use is
encoded in the name (and cbm_idx_offset).
Once the CDP behaviour is moved into the parts of resctrl that will
move to /fs/, there will be two struct resctrl_schema for one struct
rdt_resource. The schema describes the type of configuration being
applied to the resource. The name of the schema should be generated
by resctrl, base on the type of configuration. To do this struct
resctrl_schema needs to store the type of configuration in use for a
schema.
Create an enum resctrl_conf_type describing the options, and add it to
struct resctrl_schema. The underlying resources are still separate, as
cbm_idx_offset is still in use.
Temporarily label all the entries in rdt_resources_all[] and copy that
value to struct resctrl_schema. Copying the value ensures there is no
mismatch while the filesystem parts of resctrl are modified to use the
schema. Once the resources are merged, the filesystem code can assign
this value based on the schema being created.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-6-james.morse@arm.com
|
|
Resctrl exposes schemata to user-space, which allow the control values
to be specified for a group of tasks.
User-visible properties of the interface, (such as the schemata names
and how the values are parsed) are rooted in a struct provided by the
architecture code. (struct rdt_hw_resource). Once a second architecture
uses resctrl, this would allow user-visible properties to diverge
between architectures.
These properties should come from the resctrl code that will be common
to all architectures. Resctrl has no per-schema structure, only struct
rdt_{hw_,}resource. Create a struct resctrl_schema to hold the
rdt_resource. Before a second architecture can be supported, this
structure will also need to hold the schema name visible to user-space
and the type of configuration values for resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-4-james.morse@arm.com
|
|
resctrl is the defacto Linux ABI for SoC resource partitioning features.
To support it on another architecture, it needs to be abstracted from
the features provided by Intel RDT and AMD PQoS, and moved to /fs/.
struct rdt_domain contains a mix of architecture private details and
properties of the filesystem interface user-space uses.
Continue by splitting struct rdt_domain, into an architecture private
'hw' struct, which contains the common resctrl structure that would be
used by any architecture. The hardware values in ctrl_val and mbps_val
need to be accessed via helpers to allow another architecture to convert
these into a different format if necessary. After this split, filesystem
code paths touching a 'hw' struct indicates where an abstraction is
needed.
Splitting this structure only moves types around, and should not lead
to any change in behaviour.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-3-james.morse@arm.com
|
|
resctrl is the defacto Linux ABI for SoC resource partitioning features.
To support it on another architecture, it needs to be abstracted from
the features provided by Intel RDT and AMD PQoS, and moved to /fs/.
struct rdt_resource contains a mix of architecture private details
and properties of the filesystem interface user-space uses.
Start by splitting struct rdt_resource, into an architecture private
'hw' struct, which contains the common resctrl structure that would be
used by any architecture. The foreach helpers are most commonly used by
the filesystem code, and should return the common resctrl structure.
for_each_rdt_resource() is changed to walk the common structure in its
parent arch private structure.
Move as much of the structure as possible into the common structure
in the core code's header file. The x86 hardware accessors remain
part of the architecture private code, as do num_closid, mon_scale
and mbm_width.
mon_scale and mbm_width are used to detect overflow of the hardware
counters, and convert them from their native size to bytes. Any
cross-architecture abstraction should be in terms of bytes, making
these properties private.
The hardware's num_closid is kept in the private structure to force the
filesystem code to use a helper to access it. MPAM would return a single
value for the system, regardless of the resource. Using the helper
prevents this field from being confused with the version of num_closid
that is being exposed to user-space (added in a later patch).
After this split, filesystem code touching a 'hw' struct indicates
where an abstraction is needed.
Splitting this structure only moves types around, and should not lead
to any change in behaviour.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-2-james.morse@arm.com
|
|
We are about to disturb the header soup. This header uses struct pid
and struct pid_namespace. Include their header.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20200708163929.2783-6-james.morse@arm.com
|
|
Monitoring tools that want to find out which resctrl control and monitor
groups a task belongs to must currently read the "tasks" file in every
group until they locate the process ID.
Add an additional file /proc/{pid}/cpu_resctrl_groups to provide this
information:
1) res:
mon:
resctrl is not available.
2) res:/
mon:
Task is part of the root resctrl control group, and it is not associated
to any monitor group.
3) res:/
mon:mon0
Task is part of the root resctrl control group and monitor group mon0.
4) res:group0
mon:
Task is part of resctrl control group group0, and it is not associated
to any monitor group.
5) res:group0
mon:mon1
Task is part of resctrl control group group0 and monitor group mon1.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Jinshi Chen <jinshi.chen@intel.com>
Link: https://lkml.kernel.org/r/20200115092851.14761-1-yu.c.chen@intel.com
|
