summaryrefslogtreecommitdiff
path: root/include/linux/pci.h
AgeCommit message (Collapse)AuthorFilesLines
2014-07-17Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar', ↵Bjorn Helgaas1-2/+2
'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and 'pci/virtualization' into next * pci/host-generic: PCI: generic: Fix GPL v2 license string typo * pci/host-mvebu: PCI: mvebu: Fix GPL v2 license string typo * pci/host-rcar: PCI: rcar: Fix GPL v2 license string typo * pci/host-tegra: PCI: tegra: Fix GPL v2 license string typo * pci/msi: PCI/MSI: Use irq_get_msi_desc() to simplify code PCI/MSI: Remove unused list access in __pci_restore_msix_state() PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev PCI/MSI: Remove unused function msi_remove_pci_irq_vectors() PCI/MSI: Add msi_setup_entry() to clean up MSI initialization * pci/misc: PCI: Configure ASPM when enabling device x86: don't exclude low BIOS area when allocating address space for non-PCI cards PCI: Add include guard to include/linux/pci_ids.h x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup() * pci/resource: PCI: Tidy resource assignment messages PCI: Return conventional error values from pci_revert_fw_address() PCI: Cleanup control flow PCI: Support BAR sizes up to 128GB PCI: Keep original resource if we fail to expand it * pci/virtualization: powerpc/pci: Remove duplicate logic PCI: Make resetting secondary bus logic common
2014-07-17PCI/MSI: Remove unused function msi_remove_pci_irq_vectors()Yijing Wang1-2/+0
msi_remove_pci_irq_vectors() is unused, so remove it. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-04PCI: Make resetting secondary bus logic commonGavin Shan1-0/+2
Commit d92a208d086 ("powerpc/pci: Mask linkDown on resetting PCI bus") implemented same logic (resetting PCI secondary bus by bridge's config register PCI_BRIDGE_CTL_BUS_RESET) in PCI core and arch-dependent code. To avoid the duplication, move the logic to pci_reset_secondary_bus(). That commit did not declare the pcibios_reset_secondary_bus() interface in linux/include/pci.h. Add the declaration. No functional change. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-03Merge branch 'pci/iommu' into nextBjorn Helgaas1-4/+13
* pci/iommu: PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges PCI: Add support for PCIe-to-PCI bridge DMA alias quirks PCI: Add function 1 DMA alias quirk for Marvell devices PCI: Add function 0 DMA alias quirk for Ricoh devices PCI: Add support for DMA alias quirks PCI: Convert pci_dev_flags definitions to bit shifts PCI: Add DMA alias iterator
2014-05-30Merge branches 'pci/host-exynos', 'pci/host-imx6', 'pci/resource' and ↵Bjorn Helgaas1-1/+1
'pci/misc' into next * pci/host-exynos: PCI: exynos: Fix add_pcie_port() section mismatch warning * pci/host-imx6: PCI: imx6: Add support for MSI PCI: designware: Make MSI ISR shared IRQ aware PCI: imx6: Remove optional (and unused) IRQs PCI: imx6: Drop old IRQ mapping PCI: imx6: Use new clock names PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning * pci/resource: i82875p_edac: Assign PCI resources before adding device * pci/misc: ARM/PCI: Call pcie_bus_configure_settings() to set MPS PCI: Make pci_bus_add_device() void Conflicts: drivers/edac/i82875p_edac.c
2014-05-30PCI: Make pci_bus_add_device() voidYijing Wang1-1/+1
pci_bus_add_device() always returns 0, so there's no point in returning anything at all. Make it a void function and remove the tests of the return value from the callers. [bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-29Merge branch 'pci/misc' into nextBjorn Helgaas1-2/+3
* pci/misc: PCI: Fix return value from pci_user_{read,write}_config_*() PCI: Turn pcibios_penalize_isa_irq() into a weak function PCI: Test for std config alias when testing extended config space
2014-05-29Merge branches 'pci/hotplug', 'pci/pci_is_bridge' and 'pci/virtualization' ↵Bjorn Helgaas1-0/+17
into next * pci/hotplug: PCI: cpqphp: Fix possible null pointer dereference NVMe: Implement PCIe reset notification callback PCI: Notify driver before and after device reset * pci/pci_is_bridge: pcmcia: Use pci_is_bridge() to simplify code PCI: pciehp: Use pci_is_bridge() to simplify code PCI: acpiphp: Use pci_is_bridge() to simplify code PCI: cpcihp: Use pci_is_bridge() to simplify code PCI: shpchp: Use pci_is_bridge() to simplify code PCI: rpaphp: Use pci_is_bridge() to simplify code sparc/PCI: Use pci_is_bridge() to simplify code powerpc/PCI: Use pci_is_bridge() to simplify code ia64/PCI: Use pci_is_bridge() to simplify code x86/PCI: Use pci_is_bridge() to simplify code PCI: Use pci_is_bridge() to simplify code PCI: Add new pci_is_bridge() interface PCI: Rename pci_is_bridge() to pci_has_subordinate() * pci/virtualization: PCI: Introduce new device binding path using pci_dev.driver_override Conflicts: drivers/pci/pci-sysfs.c
2014-05-29PCI: Introduce new device binding path using pci_dev.driver_overrideAlex Williamson1-0/+1
The driver_override field allows us to specify the driver for a device rather than relying on the driver to provide a positive match of the device. This shortcuts the existing process of looking up the vendor and device ID, adding them to the driver new_id, binding the device, then removing the ID, but it also provides a couple advantages. First, the above existing process allows the driver to bind to any device matching the new_id for the window where it's enabled. This is often not desired, such as the case of trying to bind a single device to a meta driver like pci-stub or vfio-pci. Using driver_override we can do this deterministically using: echo pci-stub > /sys/bus/pci/devices/0000:03:00.0/driver_override echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind echo 0000:03:00.0 > /sys/bus/pci/drivers_probe Previously we could not invoke drivers_probe after adding a device to new_id for a driver as we get non-deterministic behavior whether the driver we intend or the standard driver will claim the device. Now it becomes a deterministic process, only the driver matching driver_override will probe the device. To return the device to the standard driver, we simply clear the driver_override and reprobe the device: echo > /sys/bus/pci/devices/0000:03:00.0/driver_override echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind echo 0000:03:00.0 > /sys/bus/pci/drivers_probe Another advantage to this approach is that we can specify a driver override to force a specific binding or prevent any binding. For instance when an IOMMU group is exposed to userspace through VFIO we require that all devices within that group are owned by VFIO. However, devices can be hot-added into an IOMMU group, in which case we want to prevent the device from binding to any driver (override driver = "none") or perhaps have it automatically bind to vfio-pci. With driver_override it's a simple matter for this field to be set internally when the device is first discovered to prevent driver matches. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Alexander Graf <agraf@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29PCI: Add support for PCIe-to-PCI bridge DMA alias quirksAlex Williamson1-0/+2
Several PCIe-to-PCI bridges fail to provide a PCIe capability, causing us to handle them as conventional PCI devices when they really use the requester ID of the secondary bus. We need to differentiate these from PCIe-to-PCI bridges that actually use the conventional PCI ID when a PCIe capability is not present, such as those found on the root complex of may Intel chipsets. Add a dev_flag bit to identify devices to be handled as standard PCIe-to-PCI bridges. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-29PCI: Add support for DMA alias quirksAlex Williamson1-0/+3
Some devices are broken and use a requester ID other than their physical devfn. Add a byte, using an existing gap in the pci_dev structure, to store an alternate "alias" devfn. A bit in the dev_flags tells us when this is valid. We then add the alias as one more step in the pci_for_each_dma_alias() iterator. Tested-by: George Spelvin <linux@horizon.com> Tested-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-29PCI: Convert pci_dev_flags definitions to bit shiftsAlex Williamson1-4/+4
Convert the pci_dev_flags definitions from decimal constants to bit shifts. We're only a few entries away from where using the decimal value becomes cumbersome. No functional change. Tested-by: George Spelvin <linux@horizon.com> Tested-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-28PCI: Add DMA alias iteratorAlex Williamson1-0/+4
In a mixed PCI/PCI-X/PCIe topology, bridges can take ownership of transactions, replacing the original requester ID with their own. Sometimes we just want to know the resulting device or resulting alias; other times we want each step in the chain. This iterator allows either usage. When an endpoint is connected via an unbroken chain of PCIe switches and root ports, it has no alias and its requester ID is visible to the root bus. When PCI/X get in the way, we pick up aliases for bridges. The reason why we potentially care about each step in the path is because of PCI-X. PCI-X has the concept of a requester ID, but bridges may or may not take ownership of various types of transactions. We therefore leave it to the consumer of this function to prune out what they don't care about rather than attempt to flatten the alias ourselves. Tested-by: George Spelvin <linux@horizon.com> Tested-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-28PCI: Fix return value from pci_user_{read,write}_config_*()Gavin Shan1-2/+2
The PCI user-space config accessors pci_user_{read,write}_config_*() return negative error numbers, which were introduced by commit 34e3207205ef ("PCI: handle positive error codes"). That patch converted all positive error numbers from platform-specific PCI config accessors to -EINVAL, which means the callers don't know anything about the specific cause of the failure. The patch fixes the issue by converting the positive PCIBIOS_* error values to generic negative error numbers with pcibios_err_to_errno(). [bhelgaas: changelog] Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Thelen <gthelen@google.com>
2014-05-28PCI: Turn pcibios_penalize_isa_irq() into a weak functionHanjun Guo1-0/+1
pcibios_penalize_isa_irq() is only implemented by x86 now, and legacy ISA is not used by some architectures. Make pcibios_penalize_isa_irq() a __weak function to simplify the code. This removes the need for new platforms to add stub implementations of pcibios_penalize_isa_irq(). [bhelgaas: changelog, comments] Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-05-27PCI: Add new pci_is_bridge() interfaceYijing Wang1-0/+13
Add a helper function to check a device's header type for PCI bridge or CardBus bridge. Requires: 326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate() Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-27PCI: Notify driver before and after device resetKeith Busch1-0/+3
Notify a PCI device driver when its device's access is about to be disabled for an impending reset attempt, then after the attempt completes and device access is restored. The notification is via the pci_error_handlers interface. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-27Merge branches 'dma-api', 'pci/virtualization', 'pci/msi', 'pci/misc' and ↵Bjorn Helgaas1-5/+1
'pci/resource' into next * dma-api: iommu/exynos: Remove unnecessary "&" from function pointers DMA-API: Update dma_pool_create ()and dma_pool_alloc() descriptions DMA-API: Fix duplicated word in DMA-API-HOWTO.txt DMA-API: Capitalize "CPU" consistently sh/PCI: Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory() DMA-API: Change dma_declare_coherent_memory() CPU address to phys_addr_t DMA-API: Clarify physical/bus address distinction * pci/virtualization: PCI: Mark RTL8110SC INTx masking as broken * pci/msi: PCI/MSI: Remove pci_enable_msi_block() * pci/misc: PCI: Remove pcibios_add_platform_entries() s390/pci: use pdev->dev.groups for attribute creation PCI: Move Open Firmware devspec attribute to PCI common code * pci/resource: PCI: Add resource allocation comments PCI: Simplify __pci_assign_resource() coding style PCI: Change pbus_size_mem() return values to be more conventional PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources PCI: Support BAR sizes up to 8GB resources: Clarify sanity check message PCI: Don't add disabled subtractive decode bus resources PCI: Don't print anything while decoding is disabled PCI: Don't set BAR to zero if dma_addr_t is too small PCI: Don't convert BAR address to resource if dma_addr_t is too small PCI: Reject BAR above 4GB if dma_addr_t is too small PCI: Fail safely if we can't handle BARs larger than 4GB x86/gart: Tidy messages and add bridge device info x86/gart: Replace printk() with pr_info() x86/PCI: Move pcibios_assign_resources() annotation to definition x86/PCI: Mark ATI SBx00 HPET BAR as IORESOURCE_PCI_FIXED x86/PCI: Don't try to move IORESOURCE_PCI_FIXED resources x86/PCI: Fix Broadcom CNB20LE unintended sign extension
2014-05-22PCI: Remove pcibios_add_platform_entries()Sebastian Ott1-1/+0
Remove pcibios_add_platform_entries(). Architecture-specific attributes can be achieved by setting pdev->dev.groups. Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrett Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-01PCI/MSI: Remove pci_enable_msi_block()Alexander Gordeev1-4/+1
There are no users of pci_enable_msi_block() function left. Obsolete it in favor of pci_enable_msi_range() and pci_enable_msi_exact() functions. Previously, we called arch_setup_msi_irqs() once, requesting the same vector count we passed to arch_msi_check_device(). Now we may call it several times: if it returns failure, we may retry and request fewer vectors. We don't keep track of the vector count we initially passed to arch_msi_check_device(). We only keep track of the number of vectors successfully set up by arch_setup_msi_irqs(), and this is what we use to clean things up when disabling MSI. Therefore, we assume that arch_msi_check_device() does nothing that will have to be cleaned up later. [bhelgaas: changelog] Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-25PCI: Use designated initialization in PCI_VDEVICEMark Rustad1-5/+5
By using designated initialization in PCI_VDEVICE, like other similar macros, many "missing initializer" warnings that appear when compiling with W=2 can be silenced. Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-03-20Merge branch 'pci/resource' into nextBjorn Helgaas1-1/+1
* pci/resource: (26 commits) Revert "[PATCH] Insert GART region into resource map" PCI: Log IDE resource quirk in dmesg PCI: Change pci_bus_alloc_resource() type_mask to unsigned long PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() resources: Set type in __request_region() PCI: Don't check resource_size() in pci_bus_alloc_resource() s390/PCI: Use generic pci_enable_resources() tile PCI RC: Use default pcibios_enable_device() sparc/PCI: Use default pcibios_enable_device() (Leon only) sh/PCI: Use default pcibios_enable_device() microblaze/PCI: Use default pcibios_enable_device() alpha/PCI: Use default pcibios_enable_device() PCI: Add "weak" generic pcibios_enable_device() implementation PCI: Don't enable decoding if BAR hasn't been assigned an address PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit PCI: Don't try to claim IORESOURCE_UNSET resources PCI: Check IORESOURCE_UNSET before updating BAR PCI: Don't clear IORESOURCE_UNSET when updating BAR PCI: Mark resources as IORESOURCE_UNSET if we can't assign them PCI: Remove pci_find_parent_resource() use for allocation ...
2014-03-20PCI: Change pci_bus_alloc_resource() type_mask to unsigned longBjorn Helgaas1-1/+1
The pci_bus_alloc_resource() "type_mask" parameter is used to compare with the "flags" member of a struct resource, so it should be the same type, namely "unsigned long". No functional change because all current IORESOURCE_* flags fit in 32 bits. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-21Merge branch 'pci/dead-code' into nextBjorn Helgaas1-4/+0
* pci/dead-code: PCI: Remove unused SR-IOV VF Migration support iommu/amd: Add include of <linux/irqreturn.h> mei: Add include of <linux/irqreturn.h> misc: mic: Add include of <linux/irqreturn.h>
2014-02-19PCI: Remove unused SR-IOV VF Migration supportBjorn Helgaas1-4/+0
This reverts commit 74bb1bcc7dbb ("PCI: handle SR-IOV Virtual Function Migration"), removing this exported interface: pci_sriov_migration() Since pci_sriov_migration() is unused, it is impossible to schedule sriov_migration_task() or use any of the other migration infrastructure. This is based on Stephen Hemminger's patch (see link below), but goes a bit further. Link: http://lkml.kernel.org/r/20131227132710.7190647c@nehalam.linuxnetplumber.net Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Stephen Hemminger <stephen@networkplumber.org>
2014-02-19Merge branch 'pci/list-for-each-entry' into nextBjorn Helgaas1-1/+0
* pci/list-for-each-entry: PCI: Remove pci_bus_b() and use list_for_each_entry() directly pcmcia: Use list_for_each_entry() for bus traversal powerpc/PCI: Use list_for_each_entry() for bus traversal drm: Use list_for_each_entry() for bus traversal ARM/PCI: Use list_for_each_entry() for bus traversal ACPI / hotplug / PCI: Use list_for_each_entry() for bus traversal
2014-02-15Merge branch 'pci/msi' into nextBjorn Helgaas1-0/+20
* pci/msi: vfio: Use pci_enable_msi_range() and pci_enable_msix_range() ahci: Use pci_enable_msi_range() instead of pci_enable_msi_block() ahci: Fix broken fallback to single MSI mode PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact() PCI/MSI: Fix cut-and-paste errors in documentation PCI/MSI: Add pci_enable_msi() documentation back PCI/MSI: Fix pci_msix_vec_count() htmldocs failure PCI/MSI: Fix leak of msi_attrs PCI/MSI: Check kmalloc() return value, fix leak of name
2014-02-14PCI: Remove pci_bus_b() and use list_for_each_entry() directlyYijing Wang1-1/+0
Replace list_for_each() with list_for_each_entry(), which means we no longer need pci_bus_b() and can remove it. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-13PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact()Alexander Gordeev1-0/+20
The new functions are special cases for pci_enable_msi_range() and pci_enable_msix_range() when a particular number of MSI or MSI-X is needed. By contrast with pci_enable_msi_range() and pci_enable_msix_range() functions, pci_enable_msi_exact() and pci_enable_msix_exact() return zero in case of success, which indicates MSI or MSI-X interrupts have been successfully allocated. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-12PCI: Add pci_dev_flag for ACS enable quirksAlex Williamson1-0/+2
Quirks that enable ACS-compatible functionality on a device need some way to track whether a given device has been enabled. Rather than create new data structures for this, allocate one of the pci_dev_flags to indicate this setup. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-12PCI: Add device-specific PCI ACS enableAlex Williamson1-0/+2
Some devices support PCI ACS-like features, but don't report it using the standard PCIe capabilities. We already provide hooks for device-specific testing of ACS, but not for device-specific enabling of ACS. This provides that setup hook. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-23Merge tag 'pci-v3.14-changes' of ↵Linus Torvalds1-245/+107
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ...
2014-01-15Merge branch 'pci/reset' into nextBjorn Helgaas1-0/+3
* pci/reset: vfio-pci: Use pci "try" reset interface PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
2014-01-15PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()Alex Williamson1-0/+3
When doing a function/slot/bus reset PCI grabs the device_lock for each device to block things like suspend and driver probes, but call paths exist where this lock may already be held. This creates an opportunity for deadlock. For instance, vfio allows userspace to issue resets so long as it owns the device(s). If a driver unbind .remove callback races with userspace issuing a reset, we have a deadlock as userspace gets stuck waiting on device_lock while another thread has device_lock and waits for .remove to complete. To resolve this, we can make a version of the reset interfaces which use trylock. With this, we can safely attempt a reset and return error to userspace if there is contention. [bhelgaas: the deadlock happens when A (userspace) has a file descriptor for the device, and B waits in this path: driver_detach device_lock # take device_lock __device_release_driver pci_device_remove # pci_bus_type.remove vfio_pci_remove # pci_driver .remove vfio_del_group_dev wait_event(vfio.release_q, !vfio_dev_present) # wait (holding device_lock) Now B is stuck until A gives up the file descriptor. If A tries to acquire device_lock for any reason, we deadlock because A is waiting for B to release the lock, and B is waiting for A to release the file descriptor.] Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14PCI: Add global pci_lock_rescan_remove()Rafael J. Wysocki1-0/+3
There are multiple PCI device addition and removal code paths that may be run concurrently with the generic PCI bus rescan and device removal that can be triggered via sysfs. If that happens, it may lead to multiple different, potentially dangerous race conditions. The most straightforward way to address those problems is to run the code in question under the same lock that is used by the generic rescan/remove code in pci-sysfs.c. To prepare for those changes, move the definition of the global PCI remove/rescan lock to probe.c and provide global wrappers, pci_lock_rescan_remove() and pci_unlock_rescan_remove(), allowing drivers to manipulate that lock. Also provide pci_stop_and_remove_bus_device_locked() for the callers of pci_stop_and_remove_bus_device() who only need to hold the rescan/remove lock around it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14PCI: Cleanup pci.h whitespaceBjorn Helgaas1-184/+54
Put empty or trivial inline stub functions on one line when they fit. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14PCI: Reorder so actual code comes before stubsBjorn Helgaas1-23/+23
Consistently use the: #ifdef CONFIG_PCI_FOO int pci_foo(...); #else static inline int pci_foo(...) { return -1; } #endif pattern, instead of sometimes using "#ifndef CONFIG_PCI_FOO". No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14Merge branch 'pci/dead-code' into nextBjorn Helgaas1-43/+0
* pci/dead-code: PCI: Make local functions static PCI: Remove unused alloc_pci_dev() PCI: Remove unused pci_renumber_slot() PCI: Remove unused pcie_aspm_enabled() PCI: Remove unused pci_vpd_truncate() PCI: Remove unused ID-Based Ordering support PCI: Remove unused Optimized Buffer Flush/Fill support PCI: Remove unused Latency Tolerance Reporting support PCI: Removed unused parts of Page Request Interface support Conflicts: drivers/pci/pci.c include/linux/pci.h
2014-01-13PCI: Make local functions staticStephen Hemminger1-5/+0
Using 'make namespacecheck' identify code which should be declared static. Checked for users in other driver/archs as well. Compile tested only. This stops exporting the following interfaces to modules: pci_target_state() pci_load_saved_state() [bhelgaas: retained pci_find_next_ext_capability() and pci_cfg_space_size()] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13PCI: Remove unused alloc_pci_dev()Stephen Hemminger1-1/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This removes this unused and deprecated interface: alloc_pci_dev() [bhelgaas: split to separate patch] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-13PCI: Remove unused pci_renumber_slot()Stephen Hemminger1-1/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This reverts part of f46753c5e354 ("PCI: introduce pci_slot") and d25b7c8d6ba2 ("PCI: rename pci_update_slot_number to pci_renumber_slot"), removing this interface: pci_renumber_slot() [bhelgaas: split to separate patch, add historical link from Alex] Link: http://lkml.kernel.org/r/20081009043140.8678.44164.stgit@bob.kio Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Chiang <achiang@canonical.com>
2014-01-13PCI: Remove unused pcie_aspm_enabled()Stephen Hemminger1-2/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This reverts part of 3e1b16002af2 ("ACPI/PCI: PCIe ASPM _OSC support capabilities called when root bridge added"), removing this interface: pcie_aspm_enabled() [bhelgaas: split to separate patch] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Andrew Patterson <andrew.patterson@hp.com>
2014-01-13PCI: Remove unused pci_vpd_truncate()Stephen Hemminger1-1/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This reverts db5679437a2b ("PCI: add interface to set visible size of VPD"), removing this interface: pci_vpd_truncate() [bhelgaas: split to separate patch, also remove prototype from pci.h] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-11PCI: Remove unused ID-Based Ordering supportStephen Hemminger1-13/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This reverts b48d4425b602 ("PCI: add ID-based ordering enable/disable support"), removing these interfaces: pci_enable_ido() pci_disable_ido() [bhelgaas: split to separate patch, also remove prototypes from pci.h] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org>
2014-01-11PCI: Remove unused Optimized Buffer Flush/Fill supportStephen Hemminger1-16/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This reverts 48a92a8179b3 ("PCI: add OBFF enable/disable support"), removing these interfaces: pci_enable_obff() pci_disable_obff() [bhelgaas: split to separate patch, also remove prototypes from pci.h] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org>
2014-01-11PCI: Remove unused Latency Tolerance Reporting supportStephen Hemminger1-4/+0
My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This reverts 51c2e0a7e5bc ("PCI: add latency tolerance reporting enable/disable support"), removing these interfaces: pci_enable_ltr() pci_disable_ltr() pci_set_ltr() [bhelgaas: split to separate patch, also remove prototypes from pci.h] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org>
2014-01-11Merge branch 'pci/resource' into nextBjorn Helgaas1-8/+12
* pci/resource: PCI: Allocate 64-bit BARs above 4G when possible PCI: Enforce bus address limits in resource allocation PCI: Split out bridge window override of minimum allocation address agp/ati: Use PCI_COMMAND instead of hard-coded 4 agp/intel: Use CPU physical address, not bus address, for ioremap() agp/intel: Use pci_bus_address() to get GTTADR bus address agp/intel: Use pci_bus_address() to get MMADR bus address agp/intel: Support 64-bit GMADR agp/intel: Rename gtt_bus_addr to gtt_phys_addr drm/i915: Rename gtt_bus_addr to gtt_phys_addr agp: Use pci_resource_start() to get CPU physical address for BAR agp: Support 64-bit APBASE PCI: Add pci_bus_address() to get bus address of a BAR PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev PCI: Change pci_bus_region addresses to dma_addr_t
2014-01-08Merge branch 'pci/msi' into nextBjorn Helgaas1-7/+20
* pci/msi: PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range() PCI/MSI: Add pci_msix_vec_count() PCI/MSI: Remove pci_enable_msi_block_auto() PCI/MSI: Add pci_msi_vec_count()
2014-01-08PCI: Enforce bus address limits in resource allocationYinghai Lu1-4/+0
When allocating space for 32-bit BARs, we previously limited RESOURCE addresses so they would fit in 32 bits. However, the BUS address need not be the same as the resource address, and it's the bus address that must fit in the 32-bit BAR. This patch adds: - pci_clip_resource_to_region(), which clips a resource so it contains only the range that maps to the specified bus address region, e.g., to clip a resource to 32-bit bus addresses, and - pci_bus_alloc_from_region(), which allocates space for a resource from the specified bus address region, and changes pci_bus_alloc_resource() to allocate space for 64-bit BARs from the entire bus address region, and space for 32-bit BARs from only the bus address region below 4GB. If we had this window: pci_root HWP0002:0a: host bridge window [mem 0xf0180000000-0xf01fedfffff] (bus address [0x80000000-0xfedfffff]) we previously could not put a 32-bit BAR there, because the CPU addresses don't fit in 32 bits. This patch fixes this, so we can use this space for 32-bit BARs. It's also possible (though unlikely) to have resources with 32-bit CPU addresses but bus addresses above 4GB. In this case the previous code would allocate space that a 32-bit BAR could not map. Remove PCIBIOS_MAX_MEM_32, which is no longer used. [bhelgaas: reworked starting from http://lkml.kernel.org/r/1386658484-15774-3-git-send-email-yinghai@kernel.org] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-04PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range()Alexander Gordeev1-0/+14
This adds pci_enable_msi_range(), which supersedes the pci_enable_msi() and pci_enable_msi_block() MSI interfaces. It also adds pci_enable_msix_range(), which supersedes the pci_enable_msix() MSI-X interface. The old interfaces have three categories of return values: negative: failure; caller should not retry positive: failure; value indicates number of interrupts that *could* have been allocated, and caller may retry with a smaller request zero: success; at least as many interrupts allocated as requested It is error-prone to handle these three cases correctly in drivers. The new functions return either a negative error code or a number of successfully allocated MSI/MSI-X interrupts, which is expected to lead to clearer device driver code. pci_enable_msi(), pci_enable_msi_block() and pci_enable_msix() still exist unchanged, but are deprecated and may be removed after callers are updated. [bhelgaas: tweak changelog] Suggested-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 02:45:51 +0300