summaryrefslogtreecommitdiff
path: root/include/linux/pci.h
AgeCommit message (Collapse)AuthorFilesLines
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Linus Torvalds1-1/+14
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-13Merge branch 'pci/errors'Bjorn Helgaas1-0/+9
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) * pci/errors: PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors PCI: Use PCI_ERROR_RESPONSE to identify config read errors PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads PCI: rockchip-host: Drop error data fabrication when config read fails PCI: rcar-host: Drop error data fabrication when config read fails PCI: altera: Drop error data fabrication when config read fails PCI: mvebu: Drop error data fabrication when config read fails PCI: aardvark: Drop error data fabrication when config read fails PCI: kirin: Drop error data fabrication when config read fails PCI: histb: Drop error data fabrication when config read fails PCI: exynos: Drop error data fabrication when config read fails PCI: mediatek: Drop error data fabrication when config read fails PCI: iproc: Drop error data fabrication when config read fails PCI: thunder: Drop error data fabrication when config read fails PCI: Drop error data fabrication when config read fails PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices PCI: Set error response data when config read fails PCI: Add PCI_ERROR_RESPONSE and related definitions
2022-01-13Merge branch 'pci/resource'Bjorn Helgaas1-0/+1
- Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) * pci/resource: PCI: Work around Intel I210 ROM BAR overlap defect
2022-01-11PCI: Work around Intel I210 ROM BAR overlap defectBjorn Helgaas1-0/+1
Per PCIe r5, sec 7.5.1.2.4, a device must not claim accesses to its Expansion ROM unless both the Memory Space Enable and the Expansion ROM Enable bit are set. But apparently some Intel I210 NICs don't work correctly if the ROM BAR overlaps another BAR, even if the Expansion ROM is disabled. Michael reported that on a Kontron SMARC-sAL28 ARM64 system with U-Boot v2021.01-rc3, the ROM BAR overlaps BAR 3, and networking doesn't work at all: BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M] BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K] ROM: 0x40200000 (disabled) [size=1M] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) igb 0002:01:00.0 enP2p1s0: Reset adapter Previously, pci_std_update_resource() wrote the assigned ROM address to the BAR only when the ROM was enabled. This meant that the I210 ROM BAR could be left with an address assigned by firmware, which might overlap with other BARs. Quirk these I210 devices so pci_std_update_resource() always writes the assigned address to the ROM BAR, whether or not the ROM is enabled. Link: https://lore.kernel.org/r/20211223163754.GA1267351@bhelgaas Link: https://lore.kernel.org/r/20201230185317.30915-1-michael@walle.cc Link: https://bugzilla.kernel.org/show_bug.cgi?id=211105 Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-12-18PCI: Convert pci_dev_present() stub to static inlineHans de Goede1-1/+4
Change the pci_dev_present() stub which is used when CONFIG_PCI is not set from a #define to a static inline stub. Thix should fix clang -Werror builds failing due to errors like this: drivers/platform/x86/thinkpad_acpi.c:4475:35: error: unused variable 'fwbug_cards_ids' [-Werror,-Wunused-const-variable] Where fwbug_cards_ids is an array of pci_device_id passed to pci_dev_present() during a quirk check. Link: https://lore.kernel.org/r/20211217141515.379586-1-hdegoede@redhat.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: platform-driver-x86@vger.kernel.org
2021-12-17PCI/MSI: Let the irq code handle sysfs groupsThomas Gleixner1-1/+0
Set the domain info flag which makes the core code handle sysfs groups and put an explicit invocation into the legacy code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20211210221814.048612053@linutronix.de
2021-12-17PCI/MSI: Decouple MSI[-X] disable from pcim_release()Thomas Gleixner1-1/+2
The MSI core will introduce runtime allocation of MSI related data. This data will be devres managed and has to be set up before enabling PCI/MSI[-X]. This would introduce an ordering issue vs. pcim_release(). The setup order is: pcim_enable_device() devres_alloc(pcim_release...); ... pci_irq_alloc() msi_setup_device_data() devres_alloc(msi_device_data_release, ...) and once the device is released these release functions are invoked in the opposite order: msi_device_data_release() ... pcim_release() pci_disable_msi[x]() which is obviously wrong, because pci_disable_msi[x]() requires the MSI data to be available to tear down the MSI[-X] interrupts. Remove the MSI[-X] teardown from pcim_release() and add an explicit action to be installed on the attempt of enabling PCI/MSI[-X]. This allows the MSI core data allocation to be ordered correctly in a subsequent step. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/87tuf9rdoj.ffs@tglx
2021-12-09PCI/MSI: Move msi_lock to struct pci_devThomas Gleixner1-0/+1
It's only required for PCI/MSI. So no point in having it in every struct device. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20211206210224.925241961@linutronix.de
2021-12-09PCI/MSI: Sanitize MSI-X table map handlingThomas Gleixner1-0/+1
Unmapping the MSI-X base mapping in the loops which allocate/free MSI descriptors is daft and in the way of allowing runtime expansion of MSI-X descriptors. Store the mapping in struct pci_dev and free it after freeing the MSI-X descriptors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20211206210224.871651518@linutronix.de
2021-11-18PCI: Add PCI_ERROR_RESPONSE and related definitionsNaveen Naidu1-0/+9
A config or MMIO read from a PCI device that doesn't exist or doesn't respond causes a PCI error. There's no real data to return to satisfy the CPU read, so most hardware fabricates ~0 data. Add a PCI_ERROR_RESPONSE definition for that and use it where appropriate to make these checks consistent and easier to find. Also add helper definitions PCI_SET_ERROR_RESPONSE() and PCI_POSSIBLE_ERROR() to make the code more readable. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/55563bf4dfc5d3fdc96695373c659d099bf175b1.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org>
2021-11-14Merge tag 'irq-urgent-2021-11-14' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem Core code: - A regression fix for the Open Firmware interrupt mapping code where a interrupt controller property in a node caused a map property in the same node to be ignored. Interrupt chip drivers: - Workaround a limitation in SiFive PLIC interrupt chip which silently ignores an EOI when the interrupt line is masked. - Provide the missing mask/unmask implementation for the CSKY MP interrupt controller. PCI/MSI: - Prevent a use after free when PCI/MSI interrupts are released by destroying the sysfs entries before freeing the memory which is accessed in the sysfs show() function. - Implement a mask quirk for the Nvidia ION AHCI chip which does not advertise masking capability despite implementing it. Even worse the chip comes out of reset with all MSI entries masked, which due to the missing masking capability never get unmasked. - Move the check which prevents accessing the MSI[X] masking for XEN back into the low level accessors. The recent consolidation missed that these accessors can be invoked from places which do not have that check which broke XEN. Move them back to he original place instead of sprinkling tons of these checks all over the code" * tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: of/irq: Don't ignore interrupt-controller when interrupt-map failed irqchip/sifive-plic: Fixup EOI failed when masked irqchip/csky-mpintc: Fixup mask/unmask implementation PCI/MSI: Destroy sysfs before freeing entries PCI: Add MSI masking quirk for Nvidia ION AHCI PCI/MSI: Deal with devices lying about their MSI mask capability PCI/MSI: Move non-mask check back into low level accessors
2021-11-13Merge tag 's390-5.16-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Add PCI automatic error recovery. - Fix tape driver timer initialization broken during timers api cleanup. - Fix bogus CPU measurement counters values on CPUs offlining. - Check the validity of subchanel before reading other fields in the schib in cio code. * tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: check the subchannel validity for dev_busid s390/cpumf: cpum_cf PMU displays invalid value after hotplug remove s390/tape: fix timer initialization in tape_std_assign() s390/pci: implement minimal PCI error recovery PCI: Export pci_dev_lock() s390/pci: implement reset_slot for hotplug slot s390/pci: refresh function handle in iomap
2021-11-12Merge tag 'pci-v5.16-fixes-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Revert conversion to struct device.driver instead of struct pci_dev.driver. The device.driver is set earlier, and using it caused the PCI core to call driver PM entry points before .probe() and after .remove(), when the driver isn't prepared. This caused NULL pointer dereferences in i2c_designware_pci and probably other driver issues" * tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Use to_pci_driver() instead of pci_dev->driver" Revert "PCI: Remove struct pci_dev->driver"
2021-11-11Revert "PCI: Remove struct pci_dev->driver"Bjorn Helgaas1-0/+1
This reverts commit b5f9c644eb1baafcd349ad134e2110773f8d0a38. Revert b5f9c644eb1b ("PCI: Remove struct pci_dev->driver"), which is needed to revert 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver"). 2a4d9408c9e8 caused a NULL pointer dereference reported by Robert Święcki. Details in the revert of that commit. Fixes: 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver") Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/ Reported-by: Robert Święcki <robert@swiecki.net> Tested-by: Robert Święcki <robert@swiecki.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-11PCI/MSI: Deal with devices lying about their MSI mask capabilityMarc Zyngier1-0/+2
It appears that some devices are lying about their mask capability, pretending that they don't have it, while they actually do. The net result is that now that we don't enable MSIs on such endpoint. Add a new per-device flag to deal with this. Further patches will make use of it, sadly. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20211104180130.3825416-2-maz@kernel.org Cc: Bjorn Helgaas <helgaas@kernel.org>
2021-11-08Merge tag 'cxl-for-5.16' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl updates from Dan Williams: "More preparation and plumbing work in the CXL subsystem. From an end user perspective the highlight here is lighting up the CXL Persistent Memory related commands (label read / write) with the generic ioctl() front-end in LIBNVDIMM. Otherwise, the ability to instantiate new persistent and volatile memory regions is still on track for v5.17. Summary: - Fix support for platforms that do not enumerate every ACPI0016 (CXL Host Bridge) in the CHBS (ACPI Host Bridge Structure). - Introduce a common pci_find_dvsec_capability() helper, clean up open coded implementations in various drivers. - Add 'cxl_test' for regression testing CXL subsystem ABIs. 'cxl_test' is a module built from tools/testing/cxl/ that mocks up a CXL topology to augment the nascent support for emulation of CXL devices in QEMU. - Convert libnvdimm to use the uuid API. - Complete the definition of CXL namespace labels in libnvdimm. - Tunnel libnvdimm label operations from nd_ioctl() back to the CXL mailbox driver. Enable 'ndctl {read,write}-labels' for CXL. - Continue to sort and refactor functionality into distinct driver and core-infrastructure buckets. For example, mailbox handling is now a generic core capability consumed by the PCI and cxl_test drivers" * tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits) ocxl: Use pci core's DVSEC functionality cxl/pci: Use pci core's DVSEC functionality PCI: Add pci_find_dvsec_capability to find designated VSEC cxl/pci: Split cxl_pci_setup_regs() cxl/pci: Add @base to cxl_register_map cxl/pci: Make more use of cxl_register_map cxl/pci: Remove pci request/release regions cxl/pci: Fix NULL vs ERR_PTR confusion cxl/pci: Remove dev_dbg for unknown register blocks cxl/pci: Convert register block identifiers to an enum cxl/acpi: Do not fail cxl_acpi_probe() based on a missing CHBS cxl/pci: Disambiguate cxl_pci further from cxl_mem Documentation/cxl: Add bus internal docs cxl/core: Split decoder setup into alloc + add tools/testing/cxl: Introduce a mock memory device + driver cxl/mbox: Move command definitions to common location cxl/bus: Populate the target list at decoder create tools/testing/cxl: Introduce a mocked-up CXL port hierarchy cxl/pmem: Add support for multiple nvdimm-bridge objects cxl/pmem: Translate NVDIMM label commands to CXL label commands ...
2021-11-08PCI: Export pci_dev_lock()Niklas Schnelle1-0/+1
Commit e3a9b1212b9d ("PCI: Export pci_dev_trylock() and pci_dev_unlock()") already exported pci_dev_trylock()/pci_dev_unlock() however in some circumstances such as during error recovery it makes sense to block waiting to get full access to the device so also export pci_dev_lock(). Link: https://lore.kernel.org/all/20210928181014.GA713179@bhelgaas/ Acked-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-05Merge branch 'pci/misc'Bjorn Helgaas1-11/+0
- Tidy setup-irq.c comments (Pranay Sanghai) - Fix misspellings (Krzysztof Wilczyński) - Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński) - Tidy cpqphp code formatting (Krzysztof Wilczyński) - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Remove a redundant initialization in __pci_reset_function_locked() (Colin Ian King) - Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Include generic <linux/> headers instead of <asm/> for cpqphp and vmd (Krzysztof Wilczyński) * pci/misc: PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h> PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h> MAINTAINERS: Update PCI subsystem information PCI: Prefer 'unsigned int' over bare 'unsigned' PCI: Remove redundant 'rc' initialization PCI: Remove unused pci_pool wrappers PCI: cpqphp: Format if-statement code block correctly PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path() PCI: hv: Remove unnecessary use of %hx PCI: Correct misspelled and remove duplicated words PCI: Tidy comments
2021-11-05Merge branch 'pci/vpd'Bjorn Helgaas1-0/+2
- Add pci_read_vpd_any(), pci_write_vpd_any() to access VPD at arbitrary offsets (Heiner Kallweit) - Use VPD API to replace custom code in cxgb3 driver (Heiner Kallweit) * pci/vpd: cxgb3: Remove seeprom_write and use VPD API cxgb3: Use VPD API in t3_seeprom_wp() cxgb3: Remove t3_seeprom_read and use VPD API PCI/VPD: Use pci_read_vpd_any() in pci_vpd_size() PCI/VPD: Add pci_read/write_vpd_any()
2021-11-05Merge branch 'pci/driver'Bjorn Helgaas1-2/+4
- Drop the struct pci_dev.driver pointer, which is redundant with the struct device.driver pointer (Uwe Kleine-König) * pci/driver: PCI: Remove struct pci_dev->driver PCI: Use to_pci_driver() instead of pci_dev->driver x86/pci/probe_roms: Use to_pci_driver() instead of pci_dev->driver perf/x86/intel/uncore: Use to_pci_driver() instead of pci_dev->driver powerpc/eeh: Use to_pci_driver() instead of pci_dev->driver usb: xhci: Use to_pci_driver() instead of pci_dev->driver cxl: Use to_pci_driver() instead of pci_dev->driver cxl: Factor out common dev->driver expressions xen/pcifront: Use to_pci_driver() instead of pci_dev->driver xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrv nfp: use dev_driver_string() instead of pci_dev->driver->name mlxsw: pci: Use dev_driver_string() instead of pci_dev->driver->name net: marvell: prestera: use dev_driver_string() instead of pci_dev->driver->name net: hns3: use dev_driver_string() instead of pci_dev->driver->name crypto: hisilicon - use dev_driver_string() instead of pci_dev->driver->name powerpc/eeh: Use dev_driver_string() instead of struct pci_dev->driver->name ssb: Use dev_driver_string() instead of pci_dev->driver->name bcma: simplify reference to driver name crypto: qat - simplify adf_enable_aer() scsi: message: fusion: Remove unused mpt_pci driver .probe() 'id' parameter PCI/ERR: Factor out common dev->driver expressions PCI: Drop pci_device_probe() test of !pci_dev->driver PCI: Drop pci_device_remove() test of pci_dev->driver PCI: Return NULL for to_pci_driver(NULL)
2021-10-29PCI: Add pci_find_dvsec_capability to find designated VSECBen Widawsky1-0/+1
Add pci_find_dvsec_capability to locate a Designated Vendor-Specific Extended Capability with the specified Vendor ID and Capability ID. The Designated Vendor-Specific Extended Capability (DVSEC) allows one or more "vendor" specific capabilities that are not tied to the Vendor ID of the PCI component. Where the DVSEC Vendor may be a standards body like CXL. Cc: David E. Box <david.e.box@linux.intel.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-pci@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Andrew Donnellan <ajd@linux.ibm.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/163379787943.692348.6814373487017444007.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-10-18PCI: Remove unused pci_pool wrappersCai Huoqing1-11/+0
The pci_pool users have been converted to dma_pool. Remove the unused pci_pool wrappers. Link: https://lore.kernel.org/r/20211018124110.214-1-caihuoqing@baidu.com Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-18PCI: Remove struct pci_dev->driverUwe Kleine-König1-1/+0
There are no remaining uses of the struct pci_dev->driver pointer, so remove it. Link: https://lore.kernel.org/r/20211004125935.2300113-12-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-13PCI: Return NULL for to_pci_driver(NULL)Bjorn Helgaas1-1/+4
to_pci_driver() takes a pointer to a struct device_driver and uses container_of() to find the struct pci_driver that contains it. If given a NULL pointer to a struct device_driver, return a NULL pci_driver pointer instead of applying container_of() to NULL. This simplifies callers that would otherwise have to check for a NULL pointer first. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-11PCI/VPD: Add pci_read/write_vpd_any()Heiner Kallweit1-0/+2
In certain cases we need a variant of pci_read_vpd()/pci_write_vpd() that does not check against dev->vpd.len. Such cases are: - Reading VPD if dev->vpd.len isn't set yet (in pci_vpd_size()) - Devices that map non-VPD information to arbitrary places in VPD address space (example: Chelsio T3 EEPROM write-protect flag) Therefore add pci_read_vpd_any() and pci_write_vpd_any() that check against PCI_VPD_MAX_SIZE only. Link: https://lore.kernel.org/r/93ecce28-a158-f02a-d134-8afcaced8efe@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org>
2021-09-21PCI: Rename pcibios_add_device() to pcibios_device_add()Oliver O'Halloran1-1/+1
The general convention for pcibios_* hooks is that they're named after the corresponding pci_* function they provide a hook for. The exception is pcibios_add_device() which provides a hook for pci_device_add(). Rename pcibios_add_device() to pcibios_device_add() so it matches pci_device_add(). Also, remove the export of the microblaze version. The only caller must be compiled as a built-in so there's no reason for the export. Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
2021-09-08Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds1-102/+57
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-02Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-0/+29
Pull VFIO updates from Alex Williamson: - Fix dma-valid return WAITED implementation (Anthony Yznaga) - SPDX license cleanups (Cai Huoqing) - Split vfio-pci-core from vfio-pci and enhance PCI driver matching to support future vendor provided vfio-pci variants (Yishai Hadas, Max Gurtovoy, Jason Gunthorpe) - Replace duplicated reflck with core support for managing first open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai Hadas) - Fix non-modular mdev support and don't nag about request callback support (Christoph Hellwig) - Add semaphore to protect instruction intercept handler and replace open-coded locks in vfio-ap driver (Tony Krowiak) - Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe) * tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits) vfio/pci: Introduce vfio_pci_core.ko vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on' vfio: Use select for eventfd PCI / VFIO: Add 'override_only' support for VFIO PCI sub system PCI: Add 'override_only' field to struct pci_device_id vfio/pci: Move module parameters to vfio_pci.c vfio/pci: Move igd initialization to vfio_pci.c vfio/pci: Split the pci_driver code out of vfio_pci_core.c vfio/pci: Include vfio header in vfio_pci_core.h vfio/pci: Rename ops functions to fit core namings vfio/pci: Rename vfio_pci_device to vfio_pci_core_device vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h vfio/pci: Rename vfio_pci.c to vfio_pci_core.c vfio/ap_ops: Convert to use vfio_register_group_dev() s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification s390/vfio-ap: r/w lock for PQAP interception handler function pointer vfio/type1: Fix vfio_find_dma_valid return vfio-pci/zdev: Remove repeated verbose license text vfio: platform: reset: Convert to SPDX identifier vfio: Remove struct vfio_device_ops open/release ...
2021-09-02Merge branch 'remotes/lorenzo/pci/hyper-v'Bjorn Helgaas1-0/+11
- Add domain_nr in struct pci_host_bridge (Boqun Feng) - Use host bridge MSI domain for root buses if present (Boqun Feng) - Allow ARM64 virtual host bridge with no ACPI companion (e.g., Hyper-V) (Boqun Feng) - Make Hyper-V enumeration more generic (Arnd Bergmann) - Set Hyper-V domain_nr at probe-time (Boqun Feng) - Set up Hyper-V MSI domain at bridge probe-time (Boqun Feng) - Enable Hyper-V bridge probing on ARM64 (Boqun Feng) * remotes/lorenzo/pci/hyper-v: PCI: hv: Turn on the host bridge probing on ARM64 PCI: hv: Set up MSI domain at bridge probing time PCI: hv: Set ->domain_nr of pci_host_bridge at probing time PCI: hv: Generify PCI probing arm64: PCI: Support root bridge preparation for Hyper-V arm64: PCI: Restructure pcibios_root_bridge_prepare() PCI: Support populating MSI domains of root buses via bridges PCI: Introduce domain_nr in pci_host_bridge
2021-09-02Merge branch 'pci/misc'Bjorn Helgaas1-20/+3
- Add pci_numachip_init() declaration (Krzysztof Wilczyński) - Allocate pci_dev_str_match_path() string atomically (Dan Carpenter) - Drop error message when Precision Time Measurement supported but not enabled (Jakub Kicinski) - Correct the pci_iomap.h header guard #endif comment (Jonathan Cameron) - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Make saved capability state private to core (Bjorn Helgaas) - Sync __pci_register_driver() stub for CONFIG_PCI=n (Andy Shevchenko) - Convert sta2x11 from PCI-DMA-API to generic DMA-API (Christophe JAILLET) * pci/misc: x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n PCI: Make saved capability state private to core PCI: Add schedule point in proc_bus_pci_read() PCI: Correct the pci_iomap.h header guard #endif comment PCI/PTM: Remove error message at boot PCI: Fix pci_dev_str_match_path() alloc while atomic bug x86/PCI: Add pci_numachip_init() declaration # Conflicts: # include/linux/pci.h
2021-09-02Merge branch 'pci/vpd'Bjorn Helgaas1-79/+32
- Check Resource Item Names against those defined for type (Bjorn Helgaas) - Treat initial 0xff as missing EEPROM (Heiner Kallweit) - Reject resource tags with invalid size (Bjorn Helgaas) - Don't check Large Resource Item Names for validity (Bjorn Helgaas) - Allow access to valid parts of VPD if some is invalid (Bjorn Helgaas) - Remove pci_vpd_size() old_size argument (Heiner Kallweit) - Make pci_vpd_wait() uninterruptible (Heiner Kallweit) - Remove struct pci_vpd.flag (Heiner Kallweit) - Remove struct pci_vpd_ops (Heiner Kallweit) - Remove struct pci_vpd.valid member (Heiner Kallweit) - Embed struct pci_vpd in struct pci_dev (Heiner Kallweit) - Determine VPD size in pci_vpd_init() (Heiner Kallweit) - Treat invalid VPD like missing VPD capability (Heiner Kallweit) - Add pci_vpd_alloc() to allocate buffer and read VPD into it (Heiner Kallweit) - Add pci_vpd_find_ro_info_keyword() (Heiner Kallweit) - Add pci_vpd_check_csum() (Heiner Kallweit) - Add pci_vpd_find_id_string() (Heiner Kallweit) - Read VPD with pci_vpd_alloc() (bnx2x, bnxt, sfc, sfc falcon, tg3 drivers) (Heiner Kallweit) - Search VPD with pci_vpd_find_ro_info_keyword() (bnx2, bnx2x, bnxt, cxgb4, cxlflash SCSI, sfc, sfc falcon, tg3 drivers) (Heiner Kallweit) - Search VPD with pci_vpd_find_id_string() (cxgb4 driver) (Heiner Kallweit) - Validate VPD checksum with pci_vpd_check_csum() (cxgb4, tg3 drivers) (Heiner Kallweit) - Replace open-coded byte swapping with swab32s() in bnx2 (Heiner Kallweit) - Remove unused vpd_param member ec (Heiner Kallweit) - Stop exporting pci_vpd_find_tag(), pci_vpd_find_info_keyword() (Heiner Kallweit) - Move several VPD defines and inlines to internal PCI core (Heiner Kallweit) * pci/vpd: PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() scsi: cxlflash: Search VPD with pci_vpd_find_ro_info_keyword() cxgb4: Search VPD with pci_vpd_find_ro_info_keyword() cxgb4: Remove unused vpd_param member ec cxgb4: Validate VPD checksum with pci_vpd_check_csum() bnxt: Search VPD with pci_vpd_find_ro_info_keyword() bnxt: Read VPD with pci_vpd_alloc() bnx2x: Search VPD with pci_vpd_find_ro_info_keyword() bnx2x: Read VPD with pci_vpd_alloc() bnx2: Replace open-coded byte swapping with swab32s() bnx2: Search VPD with pci_vpd_find_ro_info_keyword() sfc: falcon: Search VPD with pci_vpd_find_ro_info_keyword() sfc: falcon: Read VPD with pci_vpd_alloc() tg3: Search VPD with pci_vpd_find_ro_info_keyword() tg3: Validate VPD checksum with pci_vpd_check_csum() tg3: Read VPD with pci_vpd_alloc() sfc: Search VPD with pci_vpd_find_ro_info_keyword() sfc: Read VPD with pci_vpd_alloc() PCI/VPD: Add pci_vpd_check_csum() PCI/VPD: Add pci_vpd_find_ro_info_keyword() PCI/VPD: Add pci_vpd_alloc() PCI/VPD: Treat invalid VPD like missing VPD capability PCI/VPD: Determine VPD size in pci_vpd_init() PCI/VPD: Embed struct pci_vpd in struct pci_dev PCI/VPD: Remove struct pci_vpd.valid member PCI/VPD: Remove struct pci_vpd_ops PCI/VPD: Reorder pci_read_vpd(), pci_write_vpd() PCI/VPD: Remove struct pci_vpd.flag PCI/VPD: Make pci_vpd_wait() uninterruptible PCI/VPD: Remove pci_vpd_size() old_size argument PCI/VPD: Allow access to valid parts of VPD if some is invalid PCI/VPD: Don't check Large Resource Item Names for validity PCI/VPD: Reject resource tags with invalid size PCI/VPD: Treat initial 0xff as missing EEPROM PCI/VPD: Check Resource Item Names against those valid for type PCI/VPD: Correct diagnostic for VPD read failure
2021-09-02Merge branch 'pci/resource'Bjorn Helgaas1-3/+1
- Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) * pci/resource: PCI: Optimize pci_resource_len() to reduce kernel size PCI: Refactor pci_ioremap_bar() and pci_ioremap_wc_bar()
2021-09-02Merge branch 'pci/reset'Bjorn Helgaas1-2/+11
- Cache PCIe Device Capabilities register (Amey Narkhede) - Add pcie_reset_flr() with 'probe' argument (Amey Narkhede) - Add pdev->reset_methods[] array to track reset method ordering (Amey Narkhede) - Remove reset_fn field from pci_dev (Amey Narkhede) - Add sysfs interface to query and set device reset mechanism (Amey Narkhede) - Add pci_set_acpi_fwnode() to set ACPI_COMPANION (Shanker Donthineni) - Use acpi_pci_power_manageable() instead of duplicating logic (Shanker Donthineni) - Set ACPI fwnode early and at the same time with OF (Shanker Donthineni) - Add support for ACPI _RST reset method (Shanker Donthineni) - Change reset function 'probe' argument to bool (Amey Narkhede) * pci/reset: PCI: Change the type of probe argument in reset functions PCI: Add support for ACPI _RST reset method PCI: Setup ACPI fwnode early and at the same time with OF PCI: Use acpi_pci_power_manageable() PCI: Add pci_set_acpi_fwnode() to set ACPI_COMPANION PCI: Allow userspace to query and set device reset mechanism PCI: Remove reset_fn field from pci_dev PCI: Add array to track reset method ordering PCI: Add pcie_reset_flr() with 'probe' argument PCI: Cache PCIe Device Capabilities register
2021-09-01PCI/VPD: Clean up public VPD defines and inline functionsHeiner Kallweit1-69/+0
After recent introduction of new VPD API functions and user migration these defines and inline functions aren't used outside VPD core any longer. Link: https://lore.kernel.org/r/d33e06bf-bc5e-ece7-bf35-7245ae224d1b@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-01PCI/VPD: Add pci_vpd_find_id_string()Heiner Kallweit1-0/+10
Add a pci_vpd_find_id_string() API function to retrieve the ID string from VPD. This way callers don't need pci_vpd_lrdt_size() any longer, and it can be made private to the VPD core. Link: https://lore.kernel.org/r/c5225bf6-8d29-970d-e271-0d7b52252630@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-01PCI/VPD: Stop exporting pci_vpd_find_info_keyword()Heiner Kallweit1-13/+0
Now that the last users have been migrated to pci_vpd_find_ro_keyword() we can stop exporting this function. It's still used in VPD core code. Link: https://lore.kernel.org/r/96ca2a56-383e-9b61-9cba-4f1e5611dc15@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-01PCI/VPD: Stop exporting pci_vpd_find_tag()Heiner Kallweit1-11/+0
Now that the last users have been migrated to pci_vpd_find_ro_keyword() we can stop exporting this function. It's still used in VPD core code. Link: https://lore.kernel.org/r/71131eca-0502-7878-365f-30b6614161cf@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-26PCI: Allow PASID on fake PCIe devices without TLP prefixesZhangfei Gao1-0/+1
Some systems, e.g., HiSilicon KunPeng920 and KunPeng930, have devices that appear as PCI but are actually on the AMBA bus. Some of these fake PCI devices support a PASID-like feature and they do have a working PASID capability even though they do not use the PCIe Transport Layer Protocol and do not support TLP prefixes. Add a pasid_no_tlp bit for this "PASID works without TLP prefixes" case and update pci_enable_pasid() so it can enable PASID on these devices. Set this bit for HiSilicon KunPeng920 and KunPeng930. [bhelgaas: squashed, commit log] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/1626144876-11352-2-git-send-email-zhangfei.gao@linaro.org Link: https://lore.kernel.org/r/1626144876-11352-3-git-send-email-zhangfei.gao@linaro.org Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-26PCI / VFIO: Add 'override_only' support for VFIO PCI sub systemMax Gurtovoy1-0/+14
Expose an 'override_only' helper macro (i.e. PCI_DRIVER_OVERRIDE_DEVICE_VFIO) for VFIO PCI sub system and add the required code to prefix its matching entries with "vfio_" in modules.alias file. It allows VFIO device drivers to include match entries in the modules.alias file produced by kbuild that are not used for normal driver autoprobing and module autoloading. Drivers using these match entries can be connected to the PCI device manually, by userspace, using the existing driver_override sysfs. For example the resulting modules.alias may have: alias pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_core alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci In this example mlx5_core and mlx5_vfio_pci match to the same PCI device. The kernel will autoload and autobind to mlx5_core but the kernel and udev mechanisms will ignore mlx5_vfio_pci. When userspace wants to change a device to the VFIO subsystem it can implement a generic algorithm: 1) Identify the sysfs path to the device: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 2) Get the modalias string from the kernel: $ cat /sys/bus/pci/devices/0000:01:00.0/modalias pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00 3) Prefix it with vfio_: vfio_pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00 4) Search modules.alias for the above string and select the entry that has the fewest *'s: alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci 5) modprobe the matched module name: $ modprobe mlx5_vfio_pci 6) cat the matched module name to driver_override: echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:01:00.0/driver_override 7) unbind device from original module echo 0000:01:00.0 > /sys/bus/pci/devices/0000:01:00.0/driver/unbind 8) probe PCI drivers (or explicitly bind to mlx5_vfio_pci) echo 0000:01:00.0 > /sys/bus/pci/drivers_probe The algorithm is independent of bus type. In future the other buses with VFIO device drivers, like platform and ACPI, can use this algorithm as well. This patch is the infrastructure to provide the information in the modules.alias to userspace. Convert the only VFIO pci_driver which results in one new line in the modules.alias: alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci Later series introduce additional HW specific VFIO PCI drivers, such as mlx5_vfio_pci. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for pci.h Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20210826103912.128972-11-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-08-26PCI: Add 'override_only' field to struct pci_device_idMax Gurtovoy1-0/+15
Add 'override_only' field to struct pci_device_id to be used as part of pci_match_device(). When set, a driver only matches the entry when dev->driver_override is set to that driver. In addition, add a helper macro named 'PCI_DEVICE_DRIVER_OVERRIDE' to enable setting some data on it. Next patch from this series will use the above functionality. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20210826103912.128972-10-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-08-24PCI: Add pcie_ptm_enabled()Vinicius Costa Gomes1-0/+3
Add a predicate that returns if PCIe PTM (Precision Time Measurement) is enabled. It will only return true if it's enabled in all the ports in the path from the device to the root. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-24Revert "PCI: Make pci_enable_ptm() private"Vinicius Costa Gomes1-0/+7
Make pci_enable_ptm() accessible from the drivers. Exposing this to the driver enables the driver to use the 'ptm_enabled' field of 'pci_dev' to check if PTM is enabled or not. This reverts commit ac6c26da29c1 ("PCI: Make pci_enable_ptm() private"). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-23PCI: Introduce domain_nr in pci_host_bridgeBoqun Feng1-0/+11
Currently we retrieve the PCI domain number of the host bridge from the bus sysdata (or pci_config_window if PCI_DOMAINS_GENERIC=y). Actually we have the information at PCI host bridge probing time, and it makes sense that we store it into pci_host_bridge. One benefit of doing so is the requirement for supporting PCI on Hyper-V for ARM64, because the host bridge of Hyper-V doesn't have pci_config_window, whereas ARM64 is a PCI_DOMAINS_GENERIC=y arch, so we cannot retrieve the PCI domain number from pci_config_window on ARM64 Hyper-V guest. As the preparation for ARM64 Hyper-V PCI support, we introduce the domain_nr in pci_host_bridge and a sentinel value to allow drivers to set domain numbers properly at probing time. Currently CONFIG_PCI_DOMAINS_GENERIC=y archs are only users of this newly-introduced field. Link: https://lore.kernel.org/r/20210726180657.142727-2-boqun.feng@gmail.com Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-21PCI: Sync __pci_register_driver() stub for CONFIG_PCI=nAndy Shevchenko1-2/+3
The CONFIG_PCI=y case got a new parameter long time ago. Sync the stub as well. [bhelgaas: add parameter names] Fixes: 725522b5453d ("PCI: add the sysfs driver name to all modules") Link: https://lore.kernel.org/r/20210813153619.89574-1-andriy.shevchenko@linux.intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-21PCI: Optimize pci_resource_len() to reduce kernel sizeZhen Lei1-3/+1
pci_resource_end() can be 0 only when pci_resource_start() is 0. Otherwise, it is definitely an error. In this case, pci_resource_len() should be regarded as 0. Therefore, determining whether pci_resource_start() and pci_resource_end() are both 0 can be reduced to determining only whether pci_resource_end() is 0. Although only one condition judgment is reduced, the macro function pci_resource_len() is widely referenced in the kernel. I used defconfig to compile the latest kernel on X86, and its binary code size was reduced by about 3KB. Before: [ 2] .rela.text RELA 0000000000000000 093bfcb0 0000000001a67168 0000000000000018 I 68 1 8 After: [ 2] .rela.text RELA 0000000000000000 093bfcb0 0000000001a66598 0000000000000018 I 68 1 8 Link: https://lore.kernel.org/r/20210713072236.3043-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-21PCI: Make saved capability state private to coreBjorn Helgaas1-18/+0
Interfaces and structs for saving and restoring PCI Capability state were declared in include/linux/pci.h, but aren't needed outside drivers/pci/. Move these to drivers/pci/pci.h: struct pci_cap_saved_data struct pci_cap_saved_state void pci_allocate_cap_save_buffers() void pci_free_cap_save_buffers() int pci_add_cap_save_buffer() int pci_add_ext_cap_save_buffer() struct pci_cap_saved_state *pci_find_saved_cap() struct pci_cap_saved_state *pci_find_saved_ext_cap() Link: https://lore.kernel.org/r/20210802221728.1469304-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2021-08-20PCI/VPD: Add pci_vpd_check_csum()Heiner Kallweit1-0/+9
VPD checksum information and checksum calculation are specified by PCIe r5.0, sec 6.28.2.2. Therefore checksum handling can and should be moved into the PCI VPD core. Add pci_vpd_check_csum() to validate the VPD checksum. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/1643bd7a-088e-1028-c9b0-9d112cf48d63@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-20PCI/VPD: Add pci_vpd_find_ro_info_keyword()Heiner Kallweit1-0/+13
All users of pci_vpd_find_info_keyword() are interested in the VPD RO section only. In addition all calls are followed by the same activities to calculate start of tag data area and size of the data area. Add pci_vpd_find_ro_info_keyword() that combines these functionalities. pci_vpd_find_info_keyword() can be phased out once all users are converted. [bhelgaas: split pci_vpd_check_csum() to separate patch] Link: https://lore.kernel.org/r/1643bd7a-088e-1028-c9b0-9d112cf48d63@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-20PCI/VPD: Add pci_vpd_alloc()Heiner Kallweit1-0/+9
Several users of the VPD API use a fixed-size buffer and read the VPD into it for further usage. This requires special handling for the case that the buffer isn't big enough to hold the full VPD data. Also the buffer is often allocated on the stack, which isn't too nice. Add pci_vpd_alloc() to dynamically allocate buffer of the correct size and read VPD into it. Link: https://lore.kernel.org/r/955ff598-0021-8446-f856-0c2c077635d7@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-19PCI: Change the type of probe argument in reset functionsAmey Narkhede1-1/+4
Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 18:31:18 +0300