summaryrefslogtreecommitdiff
path: root/include/linux/edac.h
AgeCommit message (Collapse)AuthorFilesLines
2020-12-14Merge branches 'edac-spr', 'edac-igen6' and 'edac-misc' into ↵Borislav Petkov1-2/+14
edac-updates-for-v5.11 Signed-off-by: Borislav Petkov <bp@suse.de>
2020-11-19EDAC: Add DDR5 new memory typeQiuxu Zhuo1-0/+3
Add a new entry to 'enum mem_type' and a new string to 'edac_mem_types[]' for DDR5 new memory type. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-11-05EDAC: Add three new memory typesQiuxu Zhuo1-0/+9
There are {Low-Power DDR3/4, WIO2} types of memory. Add new entries to 'enum mem_type' and new strings to 'edac_mem_types[]' for the new types. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2020-11-02EDAC: Fix some kernel-doc markupsMauro Carvalho Chehab1-2/+2
Kernel-doc markup should use this format: identifier - description Correct that and also fix some enums' names in the kernel-doc markup. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/1d291393ba58c7b80908a3fedf02d2f53921ffe9.1603469755.git.mchehab+huawei@kernel.org
2020-06-16EDAC: Remove edac_get_dimm_by_index()Borislav Petkov1-22/+7
It is unused now. Signed-off-by: Borislav Petkov <bp@suse.de>
2020-04-14EDAC: Drop the EDAC report status checksTony Luck1-8/+0
When acpi_extlog was added, we were worried that the same error would be reported more than once by different subsystems. But in the ensuing years I've seen complaints that people could not find an error log (because this mechanism suppressed the log they were looking for). Rip it all out. People are smart enough to notice the same address from different reporting mechanisms. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200214222720.13168-8-tony.luck@intel.com
2020-02-17EDAC/mc: Remove per layer countersRobert Richter1-1/+3
Looking at how mci->{ue,ce}_per_layer[EDAC_MAX_LAYERS] is used, it turns out that only the leaves in the memory hierarchy are consumed (in sysfs), but not the intermediate layers, e.g.: count = dimm->mci->ce_per_layer[dimm->mci->n_layers-1][dimm->idx]; These unused counters only add complexity, remove them. The error counter values are directly stored in struct dimm_info now. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Aristeu Rozanski <aris@redhat.com> Link: https://lkml.kernel.org/r/20200123090210.26933-11-rrichter@marvell.com
2020-02-17EDAC/mc: Remove enable_per_layer_report function argumentRobert Richter1-3/+0
Many functions carry the enable_per_layer_report argument. This is a bool value indicating the error information contains some location data where the error occurred. This can easily being determined by checking the pos[] array for values. Negative values indicate there is no location available. So if the top layer is negative, the error location is unknown. Just check if the top layer is negative and remove enable_per_layer_report as function argument and also from struct edac_raw_error_desc. [ bp: Reflow comments to 80 columns, while at it. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Aristeu Rozanski <aris@redhat.com> Link: https://lkml.kernel.org/r/20200123090210.26933-8-rrichter@marvell.com
2020-02-17EDAC: Store error type in struct edac_raw_error_descRobert Richter1-0/+2
Store the error type in struct edac_raw_error_desc. This makes the type parameter of edac_raw_mc_handle_error() obsolete. [ kernel-doc typo ] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Aristeu Rozanski <aris@redhat.com> Link: https://lkml.kernel.org/r/20200123090210.26933-4-rrichter@marvell.com
2019-11-10EDAC: Remove misleading comment in struct edac_raw_error_descRobert Richter1-5/+0
There never has been such function edac_raw_error_desc_clean() and in function ghes_edac_report_mem_error() the whole struct is zero'ed including the string arrays. Remove that comment. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-9-rrichter@marvell.com
2019-11-10EDAC: Introduce an mci_for_each_dimm() iteratorRobert Richter1-0/+7
Introduce an mci_for_each_dimm() iterator. It returns a pointer to a struct dimm_info. This makes the declaration and use of an index obsolete and avoids access to internal data of struct mci (direct array access etc). [ bp: push the struct dimm_info *dimm; declaration into the CONFIG_EDAC_DEBUG block. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-4-rrichter@marvell.com
2019-11-09EDAC: Remove EDAC_DIMM_OFF() macroRobert Richter1-41/+4
The EDAC_DIMM_OFF() macro takes 5 arguments to get the DIMM's index. Simplify this by storing the index in struct dimm_info to avoid its calculation and remove the EDAC_DIMM_OFF() macro. The index can be directly used then. Another advantage is that edac_mc_alloc() could be used even if the exact size of the layers is unknown. Only the number of DIMMs would be needed. Rename iterator variable to idx, while at it. The name is more handy, esp. when searching for it in the code. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-3-rrichter@marvell.com
2019-11-09EDAC: Replace EDAC_DIMM_PTR() macro with edac_get_dimm() functionRobert Richter1-32/+57
The EDAC_DIMM_PTR() macro takes 3 arguments from struct mem_ctl_info. Clean up this interface to only pass the mci struct and replace this macro with a new function edac_get_dimm(). Also introduce an edac_get_dimm_by_index() function for later use. This allows it to get a DIMM pointer only by a given index. This can be useful if the DIMM's position within the layers of the memory controller or the exact size of the layers are unknown. Small style changes made for some hunks after applying the semantic patch. Semantic patch used: @@ expression mci, a, b,c; @@ -EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, a, b, c) +edac_get_dimm(mci, a, b, c) [ bp: Touchups. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-2-rrichter@marvell.com
2019-09-03EDAC: Prefer 'unsigned int' to bare use of 'unsigned'Robert Richter1-5/+5
Use of 'unsigned int' instead of bare use of 'unsigned'. Fix this for edac_mc*, ghes and the i5100 driver as reported by checkpatch.pl. While at it, struct member dev_ch_attribute->channel is always used as unsigned int. Change type to unsigned int to avoid type casts. [ bp: Massage. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190902123216.9809-2-rrichter@marvell.com
2018-11-13EDAC: Drop per-memory controller busesBorislav Petkov1-6/+0
... and use the single edac_subsys object returned from subsys_system_register(). The idea is to have a single bus and multiple devices on it. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> CC: Aristeu Rozanski Filho <arozansk@redhat.com> CC: Greg KH <gregkh@linuxfoundation.org> CC: Justin Ernst <justin.ernst@hpe.com> CC: linux-edac <linux-edac@vger.kernel.org> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Russ Anderson <rja@hpe.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20180926152752.GG5584@zn.tnic
2018-09-27EDAC: Raise the maximum number of memory controllersJustin Ernst1-1/+2
We observe an oops in the skx_edac module during boot: EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0 EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1 EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0 ... EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1 EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0 EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1 Too many memory controllers: 16 EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0 We observe there are two memory controllers per socket, with a limit of 16. Raise the maximum number of memory controllers from 16 to 2 * MAX_NUMNODES (1024). [ bp: This is just a band-aid fix until we've sorted out the whole issue with the bus_type association and handling in EDAC and can get rid of this arbitrary limit. ] Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Russ Anderson <russ.anderson@hpe.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.com
2018-09-22EDAC, ghes: Use CPER module handles to locate DIMMsFan Wu1-0/+2
Use SMBIOS module handle type 17, on platforms which provide valid ones, to locate the corresponding DIMM and thus have per-DIMM error counter updates. Signed-off-by: Fan Wu <wufan@codeaurora.org> [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tyler Baicar <baicar.tyler@gmail.com> Reviewed-by: James Morse <james.morse@arm.com> Tested-by: Toshi Kani <toshi.kani@hpe.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: baicar.tyler@gmail.com Cc: john.garry@huawei.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: shiju.jose@huawei.com Cc: tanxiaofei@huawei.com Cc: wanghuiqiang@huawei.com Link: http://lkml.kernel.org/r/1537322340-1860-1-git-send-email-wufan@codeaurora.org
2018-03-14EDAC: Add new memory type for non-volatile DIMMsTony Luck1-0/+3
There are now non-volatile versions of DIMMs. Add a new entry to "enum mem_type" and a new string in edac_mem_types[]. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Len Brown <lenb@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-acpi@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/20180312182430.10335-3-tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-07-17EDAC: Get rid of mci->mod_verBorislav Petkov1-1/+0
It is a write-only variable so get rid of it. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Loc Ho <lho@apm.com> Cc: linux-edac@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org
2017-04-10EDAC: Rename report status accessorsBorislav Petkov1-2/+2
Change them to have the edac_ prefix. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Delete edac_stub.cBorislav Petkov1-23/+3
Move the remaining functionality to edac_mc.c. Convert "edac_report=" to a module parameter. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Remove edac_err_assertBorislav Petkov1-1/+0
... and the glue around it. It is not needed anymore. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Get rid of edac_handlersBorislav Petkov1-1/+0
Use mc_devices list instead to check whether we have EDAC driver instances successfully registered with EDAC core. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10x86/nmi, EDAC: Get rid of DRAM error reporting thru PCI SERR NMIBorislav Petkov1-2/+0
Apparently, some machines used to report DRAM errors through a PCI SERR NMI. This is why we have a call into EDAC in the NMI handler. See c0d121720220 ("drivers/edac: add new nmi rescan"). From looking at the patch above, that's two drivers: e752x_edac.c and e7xxx_edac.c. Now, I wanna say those are old machines which are probably decommissioned already. Tony says that "[t]the newest CPU supported by either of those drivers is the Xeon E7520 (a.k.a. "Nehalem") released in Q1'2010. Possibly some folks are still using these ... but people that hold onto h/w for 7 years generally cling to old s/w too ... so I'd guess it unlikely that we will get complaints for breaking these in upstream." So even if there is a small number still in use, we did load EDAC with edac_op_state == EDAC_OPSTATE_POLL by default (we still do, in fact) which means a default EDAC setup without any parameters supplied on the command line or otherwise would never even log the error in the NMI handler because we're polling by default: inline int edac_handler_set(void) { if (edac_op_state == EDAC_OPSTATE_POLL) return 0; return atomic_read(&edac_handlers); } So, long story short, I'd like to get rid of that nastiness called edac_stub.c and confine all the EDAC drivers solely to drivers/edac/. If we ever have to do stuff like that again, it should be notifiers we're using and not some insanity like this one. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com>
2017-01-06EDAC: Fix typos in enum mem_type commentsAlexander Alemayhu1-2/+2
s/labed/labeled/ s/differenciate/differentiate/ Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170105211150.24003-1-alexander@alemayhu.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-12-15EDAC: Document HW_EVENT_ERR_DEFERRED typeYazen Ghannam1-0/+6
Add a description of the HW_EVENT_ERR_DEFERRED type that wasn't included with commit d12a969ebbfc ("EDAC, amd64: Add Deferred Error type"). Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-15edac.rst: move concepts dictionary from edac.hMauro Carvalho Chehab1-108/+0
Instead of storing the concepts dictionary inside header file, move it to the subsystem documentation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-15edac: fix kenel-doc markups at edac.hMauro Carvalho Chehab1-15/+23
As this file was never added to the driver-api, the kernel-doc markups there were never tested. Some of them have issues. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-15edac: move EDAC PCI definitions to drivers/edac/edac_pci.hMauro Carvalho Chehab1-0/+2
The edac_core.h header contain data structures and function definitions for the 3 parts of EDAC: MC, PCI and device. Let's move the PCI ones to a separate header file, as part of a header reorganization. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-21EDAC, amd64: Add Deferred Error typeYazen Ghannam1-0/+3
Currently, deferred errors are classified as correctable in EDAC. Add a new error type for deferred errors so that they are correctly reported to the user. Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1479423463-8536-7-git-send-email-Yazen.Ghannam@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-11-21EDAC: Add LRDDR4 DRAM typeYazen Ghannam1-1/+4
AMD Fam17h systems can support Load-Reduced DDR4 DIMMs. So add this new type to edac.h in preparation for the Fam17h EDAC update. Also, let's fix a format issue with the LRDDR3 line while we're here. Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1479423463-8536-3-git-send-email-Yazen.Ghannam@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-12-11EDAC: Unexport and make edac_subsys staticBorislav Petkov1-1/+0
... and use the accessor instead. Signed-off-by: Borislav Petkov <bp@suse.de>
2015-12-11EDAC: Rip out the edac_subsys reference countingBorislav Petkov1-1/+0
This was really dumb - reference counting for the main EDAC sysfs object. While we could've simply registered it as the first thing in the module init path and then hand it around to what needs it. Do that and rip out all the code around it, thus simplifying the whole handling significantly. Move the edac_subsys node back to edac_module.c. Signed-off-by: Borislav Petkov <bp@suse.de>
2015-12-03EDAC: Add DDR4 flagJim Snow1-2/+4
Make EDAC aware of DDR4/RDDR4 mem types. Signed-off-by: Jim Snow <jim.m.snow@intel.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: lukasz.anaczkowski@intel.com Link: http://lkml.kernel.org/r/1449136134-23706-2-git-send-email-hubert.chrzaniuk@intel.com [ Rebase to 4.4-rc3. ] Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2015-11-05Merge tag 'driver-core-4.4-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
2015-10-04debugfs: Pass bool pointer to debugfs_create_bool()Viresh Kumar1-1/+1
Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument, when all it needs is a boolean pointer. It would be better to update this API to make it accept 'bool *' instead, as that will make it more consistent and often more convenient. Over that bool takes just a byte. That required updates to all user sites as well, in the same commit updating the API. regmap core was also using debugfs_{read|write}_file_bool(), directly and variable types were updated for that to be bool as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22EDAC: Carve out debugfs functionalityBorislav Petkov1-2/+0
... into a separate compilation unit and drop a couple of CONFIG_EDAC_DEBUG ifdefferies. Rename edac_create_debug_nodes() to edac_create_debugfs_nodes(), while at it. No functionality change. Cc: <linux-edac@vger.kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-20EDAC: Add DDR3 LRDIMM entries to edac_mem_typesAravind Gopalakrishnan1-1/+3
F15hM60h adds support for DDR4 and DDR3 LRDIMMs. Add them here. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1411070218-10258-1-git-send-email-Aravind.Gopalakrishnan@amd.com [ Boris: improve comments. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2014-06-26edac: add DDR4 and RDDR4Aristeu Rozanski1-0/+5
Haswell memory controller can make use of DDR4 and Registered DDR4 Cc: tony.luck@intel.com Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-11EDAC: Add an edac_report parameter to EDACChen, Gong1-0/+28
This new parameter is used to control how to report HW error reporting, especially for newer Intel platform, like Ivybridge-EX, which contains an enhanced error decoding functionality in the firmware, i.e. eMCA. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1386310630-12529-2-git-send-email-gong.chen@linux.intel.com [ Boris: massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-10-23EDAC, GHES: Update ghes error record infoChen, Gong1-1/+1
In latest UEFI spec(by now it's 2.4) there are some new fields for memory error reporting. Add these new fields for ghes_edac interface. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-24EDAC: Fix lockdep splatBorislav Petkov1-1/+6
Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-03-16EDAC: Merge mci.mem_is_per_rank with mci.csbasedMauro Carvalho Chehab1-4/+2
Both mci.mem_is_per_rank and mci.csbased denote the same thing: the memory controller is csrows based. Merge both fields into one. There's no need for the driver to actually fill it, as the core detects it by checking if one of the layers has the csrows type as part of the memory hierarchy: if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT) per_rank = true; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-16amd64_edac: Correct DIMM sizesMauro Carvalho Chehab1-1/+0
We were filling the csrow size with a wrong value. 16a528ee3975 ("EDAC: Fix csrow size reported in sysfs") tried to address the issue. It fixed the report with the old API but not with the new one. Correct it for the new API too. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> [ make it a per-csrow accounting regardless of ->channel_count ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-02-21edac: add support for error type "Info"Mauro Carvalho Chehab1-0/+16
The CPER spec defines a forth type of error: informational logs. Add support for it at the edac API and at the trace event interface. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: reduce stack pressure by using a pre-allocated bufferMauro Carvalho Chehab1-0/+56
The number of variables at the stack is too big. Reduces the stack usage by using a pre-allocated error buffer. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: remove proc_name from mci structureMauro Carvalho Chehab1-2/+0
proc_name isn't used anywhere. Remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: add a new memory layer typeMauro Carvalho Chehab1-0/+4
There are some cases where the memory controller layout is completely hidden. This is the case of firmware-driven error code, like the one provided by GHES. Add a new layer to be used on such memory error report mechanisms. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21edac: edac_mc no longer deals with kobjects directlyShaun Ruffell1-1/+0
There are no more embedded kobjects in struct mem_ctl_info. Remove a header and a comment that does not reflect the code anymore. Signed-off-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-28EDAC: Fix csrow size reported in sysfsBorislav Petkov1-0/+1
On csrow-based memory controllers, we combine the csrow size from both channels and there's no need to do that again in csrow_size_show which leads to double the size of a csrow. Fix it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 03:10:50 +0300