summaryrefslogtreecommitdiff
path: root/include/linux/clk.h
AgeCommit message (Collapse)AuthorFilesLines
2020-12-21Merge branches 'clk-doc', 'clk-qcom', 'clk-simplify', 'clk-hw', ↵Stephen Boyd1-0/+18
'clk-renesas' and 'clk-samsung' into clk-next - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw * clk-doc: clk: fix a kernel-doc markup * clk-qcom: (27 commits) clk: qcom: rpmh: add support for SM8350 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8350 clk: qcom: lpasscc: Introduce pm autosuspend for SC7180 clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2 clk: qcom: gcc-sc7180: Use floor ops for sdcc clks clk: qcom: Add GDSC support for SDX55 GCC dt-bindings: clock: Add GDSC in SDX55 GCC clk: qcom: Add support for SDX55 RPMh clocks dt-bindings: clock: Introduce RPMHCC bindings for SDX55 clk: qcom: Add SDX55 GCC support dt-bindings: clock: Add SDX55 GCC clock bindings clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic" clk: qcom: rpmh: Add CE clock on sdm845. dt-bindings: clock: Add entry for crypto engine RPMH clock resource clk: qcom: dispcc-sm8250: handle MMCX power domain clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init() clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks dt-bindings: clock: Add support for LPASS Always ON Controller ... * clk-simplify: clk: remove unneeded dead-store initialization * clk-hw: clk: meson: g12: use devm variant to register notifiers clk: add devm variant of clk_notifier_register clk: meson: g12: drop use of __clk_lookup() clk: add api to get clk consumer from clk_hw clk: avoid devm_clk_release name clash * clk-renesas: dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema clk: renesas: sh73a0: Stop using __raw_*() I/O accessors clk: renesas: r8a774c0: Add RPC clocks clk: renesas: r8a779a0: Fix R and OSC clocks clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get() clk: renesas: r8a774b1: Add RPC clocks clk: renesas: r8a774a1: Add RPC clocks clk: renesas: r8a779a0: Add VIN clocks clk: renesas: r8a779a0: Add CSI4[0-3] clocks MAINTAINERS: Update git repo for Renesas clock drivers clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI * clk-samsung: clk: samsung: Prevent potential endless loop in the PLL ops clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210
2020-11-14clk: meson: g12: use devm variant to register notifiersJerome Brunet1-1/+9
Until now, nothing was done to unregister the dvfs clock notifiers of the Amlogic g12 SoC family. This is not great but this driver was not really expected to be unloaded. With the ongoing effort to build everything as module for this platform, this needs to be cleanly handled. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201021163847.595189-3-jbrunet@baylibre.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-11-14clk: add devm variant of clk_notifier_registerJerome Brunet1-0/+10
Add a memory managed variant of clk_notifier_register() to make life easier on clock consumers using notifiers Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201021163847.595189-2-jbrunet@baylibre.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-11-05clk: fix a kernel-doc markupMauro Carvalho Chehab1-1/+1
clk_get_duty_cycle -> clk_get_scaled_duty_cycle Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/b2336f3f3cdfe6e1a2d3a7a056ab7ccc7a81b945.1603469755.git.mchehab+huawei@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-07clk: clarify that clk_set_rate() does updates from top to bottomMartin Blumenstingl1-0/+3
clk_set_rate() currently starts updating the rate for a clock at the top-most affected clock and then walks down the tree to update the bottom-most affected clock last. This behavior is important for protected clocks where we can switch between multiple parents to achieve the same output. An example for this is the mali clock tree on Amlogic SoCs: mali_0_mux (must not change when enabled) mali_0_div (must not change when enabled) mali_0 (gate) mali_1_mux (must not change when enabled) mali_1_div (must not change when enabled) mali_1 (gate) The final output can either use mali_0_gate or mali_1. To change the final output we must switch to the "inactive" tree. Assuming mali_0 is active, then we need to prepare mali_1 with the new desired rate and finally switch the output to the mali_1 tree. This process will then protect the mali_1 tree and at the same time unprotect the mali_0 tree. The next call to clk_set_rate() will then switch from the mali_1 tree back to mali_0. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-09-21Merge tag 'clk-for-linus' of ↵Linus Torvalds1-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...
2019-08-08clk: Constify struct clk_bulk_data * where possibleAndrey Smirnov1-7/+10
The following functions: - clk_bulk_enable() - clk_bulk_prepare() - clk_bulk_disable() - clk_bulk_unprepare() already expect const clk_bulk_data * as a second parameter, however their no-op version have mismatching prototypes that don't. Fix that. While at it, constify the second argument of clk_bulk_prepare_enable() and clk_bulk_disable_unprepare(), since the functions they are comprised of already accept const clk_bulk_data *. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-clk@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lkml.kernel.org/r/20190717145651.17250-1-andrew.smirnov@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-23clk: Add missing documentation of devm_clk_bulk_get_optional() argumentSylwester Nawrocki1-0/+1
Fix an incomplete devm_clk_bulk_get_optional() function documentation by adding description of the num_clks argument as in other *clk_bulk* functions. Fixes: 9bd5ef0bd874 ("clk: Add devm_clk_bulk_get_optional() function") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+47
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-26clk: Add devm_clk_bulk_get_optional() functionSylwester Nawrocki1-0/+28
Add managed version of the clk_bulk_get_optional() helper function. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [sboyd@kernel.org: Mark __devm_clk_bulk_get() static] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: Add clk_bulk_get_optional() functionSylwester Nawrocki1-0/+19
clk_bulk_get_optional() allows to get a group of clocks where one or more is optional. For a not available clock, e.g. not specifed in the clock consumer node in DT, its respective struct clk pointer will be NULL. This allows for operating on a group of returned clocks (struct clk_bulk_data array) with existing clk_bulk* APIs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25clk: Add missing stubs for a few functionsDmitry Osipenko1-0/+16
Compilation fails if any of undeclared clk_set_*() functions are in use and CONFIG_HAVE_CLK=n. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-06clk: Add (devm_)clk_get_optional() functionsPhil Edworthy1-0/+36
This adds clk_get_optional() and devm_clk_get_optional() functions to get optional clocks. They behave the same as (devm_)clk_get() except where there is no clock producer. In this case, instead of returning -ENOENT, the function returns NULL. This makes error checking simpler and allows clk_prepare_enable, etc to be called on the returned reference without additional checks. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Russell King <linux@armlinux.org.uk> [sboyd@kernel.org: Document in devres.txt] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-19Merge branches 'clk-tegra' and 'clk-bulk-get-all' into clk-nextStephen Boyd1-1/+64
- Nvidia Tegra clk driver MBIST workaround fix - clk_bulk_get_all() API and friends to get all the clks for a device * clk-tegra: clk: tegra210: Include size.h for compilation ease clk: tegra: Fixes for MBIST work around clk: tegra: probe deferral error reporting * clk-bulk-get-all: clk: add managed version of clk_bulk_get_all clk: add new APIs to operate on all available clocks clk: bulk: add of_clk_bulk_get()
2018-10-17clk: add managed version of clk_bulk_get_allDong Aisheng1-0/+23
This patch introduces the managed version of clk_bulk_get_all. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: add new APIs to operate on all available clocksDong Aisheng1-1/+41
This patch introduces of_clk_bulk_get_all and clk_bulk_x_all APIs to users who just want to handle all available clocks from device tree without need to know the detailed clock information likes clock numbers and names. This is useful in writing some generic drivers to handle clock part. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-03clk: Add functions to save/restore clock context en-masseRuss Dill1-0/+25
Deep enough power saving mode can result into losing context of the clock registers also, and they need to be restored once coming back from the power saving mode. Hence add functions to save/restore clock context. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-06-19clk: add duty cycle supportJerome Brunet1-0/+33
Add the possibility to apply and query the clock signal duty cycle ratio. This is useful when the duty cycle of the clock signal depends on some other parameters controlled by the clock framework. For example, the duty cycle of a divider may depends on the raw divider setting (ratio = N / div) , which is controlled by the CCF. In such case, going through the pwm framework to control the duty cycle ratio of this clock would be a burden. A clock provider is not required to implement the operation to set and get the duty cycle. If it does not implement .get_duty_cycle(), the ratio is assumed to be 50%. This change also adds a new flag, CLK_DUTY_CYCLE_PARENT. This flag should be used to indicate that a clock, such as gates and muxes, may inherit the duty cycle ratio of its parent clock. If a clock does not provide a get_duty_cycle() callback and has CLK_DUTY_CYCLE_PARENT, then the call will be directly forwarded to its parent clock, if any. For set_duty_cycle(), the clock should also have CLK_SET_RATE_PARENT for the call to be forwarded Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180619144141.8506-1-jbrunet@baylibre.com
2018-03-17clk: add more __must_check for bulk APIsDong Aisheng1-8/+8
we need it even when !CONFIG_HAVE_CLK because it allows us to catch missing checking return values in the non-clk compile configurations too. More test coverage. Cc: Stephen Boyd <sboyd@codeaurora.org> Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-12-20clk: add clk_rate_exclusive apiJerome Brunet1-0/+62
Using clock rate protection, we can now provide a way for clock consumer to claim exclusive control over the rate of a producer So far, rate change operations have been a "last write wins" affair. This changes allows drivers to explicitly protect against this behavior, if required. Of course, if exclusivity over a producer is claimed more than once, the rate is effectively locked as exclusivity cannot be preempted Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20171201215200.23523-10-jbrunet@baylibre.com
2017-07-14Merge tag 'clk-bulk-get-prep-enable' of ↵Linus Torvalds1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk api update from Stephen Boyd: "Small patch to add the clk_bulk_prepare_enable() and clk_bulk_disable_unprepare() API to the newly introduced clk bulk APIs. It would be good to get this into the -rc1 so that other driver trees can use it for code targeted for the next merge window" * tag 'clk-bulk-get-prep-enable' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Provide bulk prepare_enable disable_unprepare variants
2017-07-13clk: Provide bulk prepare_enable disable_unprepare variantsBjorn Andersson1-0/+22
This extends the existing set of bulk helpers with prepare_enable and disable_unprepare variants. Cc: Russell King <linux@armlinux.org.uk>, Cc: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-03Merge branch 'clk-bulk-get' into clk-nextStephen Boyd1-0/+132
* clk-bulk-get: clk: add managed version of clk_bulk_get clk: add clk_bulk_get accessories
2017-06-03clk: add managed version of clk_bulk_getDong Aisheng1-0/+21
This patch introduces the managed version of clk_bulk_get. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Anson Huang <anson.huang@nxp.com> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Octavian Purdila <octavian.purdila@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-03clk: add clk_bulk_get accessoriesDong Aisheng1-0/+111
These helper function allows drivers to get several clk consumers in one operation. If any of the clk cannot be acquired then any clks that were got will be put before returning to the caller. This can relieve the driver owners' life who needs to handle many clocks, as well as each clock error reporting. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Anson Huang <anson.huang@nxp.com> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Octavian Purdila <octavian.purdila@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02clk: Provide dummy of_clk_get_from_provider() for compile-testingGeert Uytterhoeven1-0/+4
When CONFIG_ON=n, dummies are provided for of_clk_get() and of_clk_get_by_name(), but not for of_clk_get_from_provider(). Provide a dummy for the latter, to improve the ability to do compile-testing. This requires removing the existing dummy in the Lantiq clock code. Fixes: 766e6a4ec602d0c1 ("clk: add DT clock binding support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Thomas Langer <thomas.langer@intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-02kernel-api.rst: fix a series of errors when parsing C filesmchehab@s-opensource.com1-2/+2
./lib/string.c:134: WARNING: Inline emphasis start-string without end-string. ./mm/filemap.c:522: WARNING: Inline interpreted text or phrase reference start-string without end-string. ./mm/filemap.c:1283: ERROR: Unexpected indentation. ./mm/filemap.c:3003: WARNING: Inline interpreted text or phrase reference start-string without end-string. ./mm/vmalloc.c:1544: WARNING: Inline emphasis start-string without end-string. ./mm/page_alloc.c:4245: ERROR: Unexpected indentation. ./ipc/util.c:676: ERROR: Unexpected indentation. ./drivers/pci/irq.c:35: WARNING: Block quote ends without a blank line; unexpected unindent. ./security/security.c:109: ERROR: Unexpected indentation. ./security/security.c:110: WARNING: Definition list ends without a blank line; unexpected unindent. ./block/genhd.c:275: WARNING: Inline strong start-string without end-string. ./block/genhd.c:283: WARNING: Inline strong start-string without end-string. ./include/linux/clk.h:134: WARNING: Inline emphasis start-string without end-string. ./include/linux/clk.h:134: WARNING: Inline emphasis start-string without end-string. ./ipc/util.c:477: ERROR: Unknown target name: "s". Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-09clk: add devm_get_clk_from_child() APIKuninori Morimoto1-4/+25
Some driver is using this type of DT bindings for clock (more detail, see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt). sound_soc { ... cpu { clocks = <&xxx>; ... }; codec { clocks = <&xxx>; ... }; }; Current driver in this case uses of_clk_get() for each node, but there is no devm_of_clk_get() today. OTOH, the problem of having devm_of_clk_get() is that it encourages the use of of_clk_get() when clk_get() is more desirable. Thus, this patch adds new devm_get_clk_from_chile() which explicitly reads as get a clock from a child node of this device. By this function, we can also use this type of DT bindings sound_soc { clocks = <&xxx>, <&xxx>; clock-names = "cpu", "codec"; clock-ranges; ... cpu { ... }; codec { ... }; }; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [sboyd@codeurora.org: Rename subject to clk + add API] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-30Merge tag 'clk-for-linus-4.8' of ↵Linus Torvalds1-2/+14
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Michael Turquette: "The bulk of the changes are updates and fixes to existing clk provider drivers, along with a pretty standard number of new drivers. The core recieved a small number of updates as well. Core changes of note: - removed CLK_IS_ROOT flag New clk provider drivers: - Renesas r8a7796 clock pulse generator / module standby and software reset - Allwinner sun8i H3 clock controller unit - AmLogic meson8b clock controller (rewritten) - AmLogic gxbb clock controller - support for some new ICs was added by simple changes to static data tables for chips sharing the same family Driver updates of note: - the Allwinner sunxi clock driver infrastucture was rewritten to comform to the state of the art at drivers/clk/sunxi-ng. The old implementation is still supported for backwards compatibility with the DT ABI" * tag 'clk-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits) clk: Makefile: re-sort and clean up Revert "clk: gxbb: expose CLKID_MMC_PCLK" clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver clk: samsung: make clk-s5pv210-audss explicitly non-modular clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks clk: oxnas: Add hardware dependencies clk: imx7d: do not set parent of ethernet time/ref clocks ARM: dt: sun8i: switch the H3 to the new CCU driver clk: sunxi-ng: h3: Fix Kconfig symbol typo clk: sunxi-ng: h3: Fix audio clock divider offset clk: sunxi-ng: Add H3 clocks clk: sunxi-ng: Add N-K-M-P factor clock clk: sunxi-ng: Add N-K-M Factor clock clk: sunxi-ng: Add N-M-factor clock support clk: sunxi-ng: Add N-K-factor clock support clk: sunxi-ng: Add M-P factor clock support clk: sunxi-ng: Add divider clk: sunxi-ng: Add phase clock support clk: sunxi-ng: Add mux clock support clk: sunxi-ng: Add gate clock support ...
2016-06-29clk: Provide notifier stubs when !COMMON_CLKKrzysztof Kozlowski1-2/+14
The clk notifier symbols are hidden by COMMON_CLK. However on some platforms HAVE_CLK might be set while COMMON_CLK not which leads to compile test build errors like: $ make.cross ARCH=sh drivers/devfreq/tegra-devfreq.c: In function 'tegra_actmon_rate_notify_cb': >> drivers/devfreq/tegra-devfreq.c:391:16: error: 'POST_RATE_CHANGE' undeclared (first use in this function) if (action != POST_RATE_CHANGE) ^ drivers/devfreq/tegra-devfreq.c: In function 'tegra_devfreq_probe': >> drivers/devfreq/tegra-devfreq.c:654:8: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration] err = clk_notifier_register(tegra->emc_clock, &tegra->rate_change_nb); ^ Export the macros and data type declarations outside of COMMON_CLK ifdef and provide stubs to fix the compile testing. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-28clk: Add missing clk_get_sys() stubDaniel Lezcano1-0/+4
When compiling with the COMPILE_TEST option set, the clps711x does not compile because of the clk_get_sys() noop stub missing. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Michael Turquette <mturquette@baylibre.com>
2015-05-06clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.hRussell King1-13/+0
clk_add_alias() is provided by clkdev, and is not part of the clk API. Howver, it is prototyped in two locations: linux/clkdev.h and linux/clk.h. This is a mess. Get rid of the redundant and unnecessary version in linux/clk.h. Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-06clk: update clk API documentation to clarify clk_round_rate()Russell King1-0/+14
The idea is that rate = clk_round_rate(clk, r) is equivalent to: clk_set_rate(clk, r); rate = clk_get_rate(clk); except that clk_round_rate() does not change the hardware in any way. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-12clk: introduce clk_is_matchMichael Turquette1-0/+18
Some drivers compare struct clk pointers as a means of knowing if the two pointers reference the same clock hardware. This behavior is dubious (drivers must not dereference struct clk), but did not cause any regressions until the per-user struct clk patch was merged. Now the test for matching clk's will always fail with per-user struct clk's. clk_is_match is introduced to fix the regression and prevent drivers from comparing the pointers manually. Fixes: 035a61c314eb ("clk: Make clk API return per-user struct clk instances") Cc: Russell King <linux@arm.linux.org.uk> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Michael Turquette <mturquette@linaro.org> [arnd@arndb.de: Fix COMMON_CLK=N && HAS_CLK=Y config] Signed-off-by: Arnd Bergmann <arnd@arndb.de> [sboyd@codeaurora.org: const arguments to clk_is_match() and remove unnecessary ternary operation] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-02-03clk: Add rate constraints to clocksTomeu Vizoso1-0/+28
Adds a way for clock consumers to set maximum and minimum rates. This can be used for thermal drivers to set minimum rates, or by misc. drivers to set maximum rates to assure a minimum performance level. Changes the signature of the determine_rate callback by adding the parameters min_rate and max_rate. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [sboyd@codeaurora.org: set req_rate in __clk_init] Signed-off-by: Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate migrated clk-private.h changes to clk.c]
2015-01-25clk: Introduce clk_has_parent()Thierry Reding1-0/+17
This new function is similar to clk_set_parent(), except that it doesn't actually change the parent. It merely checks that the given parent clock can be a parent for the given clock. A situation where this is useful is to check that a particular setup is valid before switching to it. One specific use-case for this is atomic modesetting in the DRM framework where setting a mode is divided into a check phase where a given configuration is validated before applying changes to the hardware. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-15Merge tag 'clk-for-linus-3.18' of ↵Linus Torvalds1-0/+29
git://git.linaro.org/people/mike.turquette/linux Pull clock tree updates from Mike Turquette: "The clk tree changes for 3.18 are dominated by clock drivers. Mostly fixes and enhancements to existing drivers as well as new drivers. This tag contains a bit more arch code than I usually take due to some OMAP2+ changes. Additionally it contains the restart notifier handlers which are merged as a dependency into several trees. The PXA changes are the only messy part. Due to having a stable tree I had to revert one patch and follow up with one more fix near the tip of this tag. Some dead code is introduced but it will soon become live code after 3.18-rc1 is released as the rest of the PXA family is converted over to the common clock framework. Another trend in this tag is that multiple vendors have started to push the complexity of changing their CPU frequency into the clock driver, whereas this used to be done in CPUfreq drivers. Changes to the clk core include a generic gpio-clock type and a clk_set_phase() function added to the top-level clk.h api. Due to some confusion on the fbdev mailing list the kernel boot parameters documentation was updated to further explain the clk_ignore_unused parameter, which is often required by users of the simplefb driver. Finally some fixes to the locking around the clock debugfs stuff was done to prevent deadlocks when interacting with other subsystems." * tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits) clk: pxa clocks build system fix Revert "arm: pxa: Transition pxa27x to clk framework" clk: samsung: register restart handlers for s3c2412 and s3c2443 clk: rockchip: add restart handler clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate doc/kernel-parameters.txt: clarify clk_ignore_unused arm: pxa: Transition pxa27x to clk framework dts: add devicetree bindings for pxa27x clocks clk: add pxa27x clock drivers arm: pxa: add clock pll selection bits clk: dts: document pxa clock binding clk: add pxa clocks infrastructure clk: gpio-gate: Ensure gpiod_ APIs are prototyped clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe clk: ti: LLVMLinux: Move __init outside of type definition clk: ti: consider the fact that of_clk_get() might return an error clk: ti: dra7-atl-clock: fix a memory leak clk: ti: change clock init to use generic of_clk_init clk: hix5hd2: add I2C clocks clk: hix5hd2: add watchdog0 clocks ...
2014-09-27clk: introduce clk_set_phase function & callbackMike Turquette1-0/+29
A common operation for a clock signal generator is to shift the phase of that signal. This patch introduces a new function to the clk.h API to dynamically adjust the phase of a clock signal. Additionally this patch introduces support for the new function in the common clock framework via the .set_phase call back in struct clk_ops. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-09Documentation: Docbook: Fix generated DocBook/kernel-api.xmlMasanari Iida1-1/+1
This patch fix spelling typo found in DocBook/kernel-api.xml. It is because the file is generated from the source comments, I have to fix the comments in source codes. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-25clk: add pr_debug & kerneldoc around clk notifiersMike Turquette1-0/+14
Both the pr_err and the additional kerneldoc aim to help when debugging errors thrown from within a clock rate-change notifier callback. Reported-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-23clk: add clk accuracy retrieval supportBoris BREZILLON1-0/+17
The clock accuracy is expressed in ppb (parts per billion) and represents the possible clock drift. Say you have a clock (e.g. an oscillator) which provides a fixed clock of 20MHz with an accuracy of +- 20Hz. This accuracy expressed in ppb is 20Hz/20MHz = 1000 ppb (or 1 ppm). Clock users may need the clock accuracy information in order to choose the best clock (the one with the best accuracy) across several available clocks. This patch adds clk accuracy retrieval support for common clk framework by means of a new function called clk_get_accuracy. This function returns the given clock accuracy expressed in ppb. In order to get the clock accuracy, this implementation adds one callback called recalc_accuracy to the clk_ops structure. This callback is given the parent clock accuracy (if the clock is not a root clock) and should recalculate the given clock accuracy. This callback is optional and may be implemented if the clock is not a perfect clock (accuracy != 0 ppb). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-11clk: Properly handle notifier return valuesSoren Brinkmann1-4/+4
Notifiers may return NOTIFY_(OK|DONE|STOP|BAD). The CCF uses an inconsistent mix of checking against NOTIFY_STOP or NOTIFY_BAD. This inconsistency leaves errors undetected in some cases: clk_set_parent() calls __clk_speculate_rates(), which stops when it hits a NOTIFIER_BAD (STOP is ignored), and passes this value back to the caller. clk_set_parent() compares this return value against NOTIFY_STOP only, ignoring NOTIFY_BAD returns. Use NOTIFY_STOP_MASK to detect a negative notifier return value and document all four return value options. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-31clk: add non CONFIG_HAVE_CLK routinesViresh Kumar1-59/+109
Many drivers are shared between architectures that may or may not have HAVE_CLK selected for them. To remove compilation errors for them we enclose clk_*() calls in these drivers within #ifdef CONFIG_HAVE_CLK, #endif. This patch removes the need of these CONFIG_HAVE_CLK statements, by introducing dummy routines when HAVE_CLK is not selected by platforms. So, definition of these routines will always be available. These calls will return error for platforms that don't select HAVE_CLK. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Garzik <jgarzik@redhat.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-25Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds1-0/+20
Pull common clk framework changes from Michael Turquette: "This includes a small number of core framework improvments, platform ports and new DT bindings." Fix up trivial conflicts in drivers/clk/Makefile * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits) clk: fix compile for OF && !COMMON_CLK clk: fix clk_get on of_clk_get_by_name return check clk: mxs: clk_register_clkdev mx28 usb clocks clk: add highbank clock support dt: add clock binding doc to primecell bindings clk: add DT fixed-clock binding support clk: add DT clock binding support ARM: integrator: convert to common clock clk: add versatile ICST307 driver ARM: integrator: put symbolic bus names on devices ARM: u300: convert to common clock clk: cache parent clocks only for muxes clk: wm831x: Add initial WM831x clock driver clk: Constify struct clk_init_data clk: Add CLK_IS_BASIC flag to identify basic clocks clk: Add support for rate table based dividers clk: Add support for power of two type dividers clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3 clk: mxs: add clkdev lookup for pwm clk: mxs: Fix the GPMI clock name ...
2012-07-24Fix typo in include/linux/clk.h .Jan-Simon Möller1-2/+2
Signed-off-by: Jan-Simon Möller <jansimon.moeller@gmx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-kernel@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-20clk: fix compile for OF && !COMMON_CLKRob Herring1-1/+1
With commit 766e6a4ec602d0c107 (clk: add DT clock binding support), compiling with OF && !COMMON_CLK is broken. Reported-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reported-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-20clk: fix clk_get on of_clk_get_by_name return checkShawn Guo1-2/+3
The commit 766e6a4 (clk: add DT clock binding support) plugs device tree clk lookup of_clk_get_by_name into clk_get, and fall on non-DT lookup clk_get_sys if DT lookup fails. The return check on of_clk_get_by_name takes (clk != NULL) as a successful DT lookup. But it's not the case. For any system that does not define clk lookup in device tree, ERR_PTR(-ENOENT) will be returned, and consequently, all the client drivers calling clk_get in their probe functions will fail to probe with error code -ENOENT returned. Fix the issue by checking of_clk_get_by_name return with !IS_ERR(clk), and update of_clk_get and of_clk_get_by_name for !CONFIG_OF build correspondingly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-12clk: add DT clock binding supportGrant Likely1-0/+19
Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-11Merge branch 'depends/rmk/clkdev' into next/clockArnd Bergmann1-0/+32
* depends/rmk/clkdev: CLKDEV: provide helpers for common clock framework ARM: 7392/1: CLKDEV: Optimize clk_find() ARM: 7376/1: clkdev: Implement managed clk_get()
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 04:32:34 +0300