| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
pKVM relies on hypercalls to expose services such as memory sharing to
protected guests. Tentatively allocate a block of 58 hypercalls (i.e.
fill the remaining space in the first 64 function IDs) for pKVM usage,
as future extensions such as pvIOMMU support, range-based memory sharing
and validation of assigned devices will require additional services.
Suggested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86a5h5yg5y.wl-maz@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-8-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Hook up pKVM's MMIO_GUARD hypercall so that ioremap() and friends will
register the target physical address as MMIO with the hypervisor,
allowing guest exits to that page to be emulated by the host with full
syndrome information.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-7-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If we detect the presence of pKVM's SHARE and UNSHARE hypercalls, then
register a backend implementation of the mem_encrypt API so that things
like DMA buffers can be shared appropriately with the host.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-5-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement a pKVM protected guest driver to probe the presence of pKVM
and determine the memory protection granule using the HYP_MEMINFO
hypercall.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When SVE is enabled, the host may set bit 16 in SMCCC function IDs, a
hint that indicates an unused SVE state. At the moment NVHE doesn't
account for this bit when inspecting the function ID, and rejects most
calls. Clear the hint bit before comparing function IDs.
About version compatibility: the host's PSCI driver initially probes the
firmware for a SMCCC version number. If the firmware implements a
protocol recent enough (1.3), subsequent SMCCC calls have the hint bit
set. Since the hint bit was reserved in earlier versions of the
protocol, clearing it is fine regardless of the version in use.
When a new hint is added to the protocol in the future, it will be added
to ARM_SMCCC_CALL_HINTS and NVHE will handle it straight away. This
patch only clears known hints and leaves reserved bits as is, because
future SMCCC versions could use reserved bits as modifiers for the
function ID, rather than hints.
Fixes: cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230911145254.934414-4-jean-philippe@linaro.org
|
|
Replace custom implementation of the macros from args.h.
Link: https://lkml.kernel.org/r/20230718211147.18647-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Gow <davidgow@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The T241 platform suffers from the T241-FABRIC-4 erratum which causes
unexpected behavior in the GIC when multiple transactions are received
simultaneously from different sources. This hardware issue impacts
NVIDIA server platforms that use more than two T241 chips
interconnected. Each chip has support for 320 {E}SPIs.
This issue occurs when multiple packets from different GICs are
incorrectly interleaved at the target chip. The erratum text below
specifies exactly what can cause multiple transfer packets susceptible
to interleaving and GIC state corruption. GIC state corruption can
lead to a range of problems, including kernel panics, and unexpected
behavior.
>From the erratum text:
"In some cases, inter-socket AXI4 Stream packets with multiple
transfers, may be interleaved by the fabric when presented to ARM
Generic Interrupt Controller. GIC expects all transfers of a packet
to be delivered without any interleaving.
The following GICv3 commands may result in multiple transfer packets
over inter-socket AXI4 Stream interface:
- Register reads from GICD_I* and GICD_N*
- Register writes to 64-bit GICD registers other than GICD_IROUTERn*
- ITS command MOVALL
Multiple commands in GICv4+ utilize multiple transfer packets,
including VMOVP, VMOVI, VMAPP, and 64-bit register accesses."
This issue impacts system configurations with more than 2 sockets,
that require multi-transfer packets to be sent over inter-socket
AXI4 Stream interface between GIC instances on different sockets.
GICv4 cannot be supported. GICv3 SW model can only be supported
with the workaround. Single and Dual socket configurations are not
impacted by this issue and support GICv3 and GICv4."
Link: https://developer.nvidia.com/docs/t241-fabric-4/nvidia-t241-fabric-4-errata.pdf
Writing to the chip alias region of the GICD_In{E} registers except
GICD_ICENABLERn has an equivalent effect as writing to the global
distributor. The SPI interrupt deactivate path is not impacted by
the erratum.
To fix this problem, implement a workaround that ensures read accesses
to the GICD_In{E} registers are directed to the chip that owns the
SPI, and disable GICv4.x features. To simplify code changes, the
gic_configure_irq() function uses the same alias region for both read
and write operations to GICD_ICFGR.
Co-developed-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com> (for SMCCC/SOC ID bits)
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230319024314.3540573-2-sdonthineni@nvidia.com
|
|
Some CPUs affected by Spectre-BHB need a sequence of branches, or a
firmware call to be run before any indirect branch. This needs to go
in the vectors. No CPU needs both.
While this can be patched in, it would run on all CPUs as there is a
single set of vectors. If only one part of a big/little combination is
affected, the unaffected CPUs have to run the mitigation too.
Create extra vectors that include the sequence. Subsequent patches will
allow affected CPUs to select this set of vectors. Later patches will
modify the loop count to match what the CPU requires.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
Now that SCM can be a loadable module, we have to add another
dependency to avoid link failures when ipa or adreno-gpu are
built-in:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':
ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'
ld.lld: error: undefined symbol: qcom_scm_is_available
>>> referenced by adreno_gpu.c
>>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a
This can happen when CONFIG_ARCH_QCOM is disabled and we don't select
QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd
use a similar dependency here to what we have for QCOM_RPROC_COMMON,
but that causes dependency loops from other things selecting QCOM_SCM.
This appears to be an endless problem, so try something different this
time:
- CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on'
but that is simply selected by all of its users
- All the stubs in include/linux/qcom_scm.h can go away
- arm-smccc.h needs to provide a stub for __arm_smccc_smc() to
allow compile-testing QCOM_SCM on all architectures.
- To avoid a circular dependency chain involving RESET_CONTROLLER
and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement.
According to my testing this still builds fine, and the QCOM
platform selects this symbol already.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
SMCCC v1.2 requires that all SVE state be preserved over SMC calls which
introduces substantial overhead in the common case where there is no SVE
state in the registers. To avoid this SMCCC v1.3 introduces a flag which
allows the caller to say that there is no state that needs to be preserved
in the registers. Make use of this flag, setting it if the SMCCC version
indicates support for it and the TIF_ flags indicate that there is no live
SVE state in the registers, this avoids placing any constraints on when
SMCCC calls can be done or triggering extra saving and reloading of SVE
register state in the kernel.
This would be straightforward enough except for the rather entertaining
inline assembly we use to do SMCCC v1.1 calls to allow us to take advantage
of the limited number of registers it clobbers. Deal with this by having a
function which we call immediately before issuing the SMCCC call to make
our checks and set the flag. Using alternatives the overhead if SVE is
supported but not detected at runtime can be reduced to a single NOP.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210603184118.15090-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
SMCCC v1.2 allows x8-x17 to be used as parameter registers and x4—x17
to be used as result registers in SMC64/HVC64. Arm Firmware Framework
for Armv8-A specification makes use of x0-x7 as parameter and result
registers. There are other users like Hyper-V who intend to use beyond
x0-x7 as well.
Current SMCCC interface in the kernel just use x0-x7 as parameter and
x0-x3 as result registers as required by SMCCCv1.0. Let us add new
interface to support this extended set of input/output registers namely
x0-x17 as both parameter and result registers.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210518163618.43950-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement the hypervisor side of the KVM PTP interface.
The service offers wall time and cycle count from host to guest.
The caller must specify whether they want the host's view of
either the virtual or physical counter.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-7-jianyong.wu@arm.com
|
|
Although the SMCCC specification provides some limited functionality for
describing the presence of hypervisor and firmware services, this is
generally applicable only to functions designated as "Arm Architecture
Service Functions" and no portable discovery mechanism is provided for
standard hypervisor services, despite having a designated range of
function identifiers reserved by the specification.
In an attempt to avoid the need for additional firmware changes every
time a new function is added, introduce a UID to identify the service
provider as being compatible with KVM. Once this has been established,
additional services can be discovered via a feature bitmap.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
[maz: move code to its own file, plug it into PSCI]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-2-jianyong.wu@arm.com
|
|
The ARM architected TRNG firmware interface, described in ARM spec
DEN0098, define an ARM SMCCC based interface to a true random number
generator, provided by firmware.
Add the definitions of the SMCCC functions as defined by the spec.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210106103453.152275-2-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
According to the SMCCC spec[1](7.5.2 Discovery) the
ARM_SMCCC_ARCH_WORKAROUND_1 function id only returns 0, 1, and
SMCCC_RET_NOT_SUPPORTED.
0 is "workaround required and safe to call this function"
1 is "workaround not required but safe to call this function"
SMCCC_RET_NOT_SUPPORTED is "might be vulnerable or might not be, who knows, I give up!"
SMCCC_RET_NOT_SUPPORTED might as well mean "workaround required, except
calling this function may not work because it isn't implemented in some
cases". Wonderful. We map this SMC call to
0 is SPECTRE_MITIGATED
1 is SPECTRE_UNAFFECTED
SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE
For KVM hypercalls (hvc), we've implemented this function id to return
SMCCC_RET_NOT_SUPPORTED, 0, and SMCCC_RET_NOT_REQUIRED. One of those
isn't supposed to be there. Per the code we call
arm64_get_spectre_v2_state() to figure out what to return for this
feature discovery call.
0 is SPECTRE_MITIGATED
SMCCC_RET_NOT_REQUIRED is SPECTRE_UNAFFECTED
SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE
Let's clean this up so that KVM tells the guest this mapping:
0 is SPECTRE_MITIGATED
1 is SPECTRE_UNAFFECTED
SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE
Note: SMCCC_RET_NOT_AFFECTED is 1 but isn't part of the SMCCC spec
Fixes: c118bbb52743 ("arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://developer.arm.com/documentation/den0028/latest [1]
Link: https://lore.kernel.org/r/20201023154751.1973872-1-swboyd@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Using the same register-bound variable for both arguments and results
means these values share a type. That type must allow the arguments to
be assigned to it and must also be assignable to the unsigned long
fields of struct arm_smccc_res.
This restriction on types causes compiler warnings when the argument
cannot be implicitly assigned to an unsigned long, for example the
pointers that are used in the KVM hyp interface.
By separating the arguments and results into their own variables, the
type constraint is lifted allowing the arguments to avoid the need for
any type conversion.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200915104643.2543892-17-ascull@google.com
|
|
Vendor specific hypervisor services have their own region of function
identifiers reserved by SMCCC. Extend the list of owners to include this
case.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200915104643.2543892-16-ascull@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
|
|
Move constants out of the C-only section of the header next to the other
constants that are available to assembly.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200618145511.69203-1-ascull@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
SMCCC v1.2 adds a new optional function SMCCC_ARCH_SOC_ID to obtain a
SiP defined SoC identification value. Add support for the same.
Also using the SoC bus infrastructure, let us expose the platform
specific SoC atrributes under sysfs.
There are various ways in which it can be represented in shortened form
for efficiency and ease of parsing for userspace. The chosen form is
described in the ABI document.
Link: https://lore.kernel.org/r/20200625095939.50861-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Commit f2ae97062a48 ("firmware: smccc: Refactor SMCCC specific bits into
separate file") introduced the following build warning:
drivers/firmware/smccc/smccc.c:14:13: warning: no previous prototype for
function 'arm_smccc_version_init' [-Wmissing-prototypes]
void __init arm_smccc_version_init(u32 version, enum arm_smccc_conduit conduit)
^~~~~~~~~~~~~~~~~~~~~~
Fix the same by adding the missing prototype in arm-smccc.h
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200521110836.57252-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For backward compatibility reasons, PSCI maintains SMCCC version as
SMCCC didn't provide ARM_SMCCC_VERSION_FUNC_ID until v1.1.
PSCI initialises both the SMCCC version and conduit. Similar to the
conduit, let us provide accessors to fetch the SMCCC version also so
that other SMCCC v1.1+ features can use it.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-7-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the definition for SMCCC v1.2 version and new error code added.
While at it, also add a note that ARM DEN 0070A is deprecated and is
now merged into the main SMCCC specification(ARM DEN 0028C).
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Link: https://lore.kernel.org/r/20200518091222.27467-4-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The current link gets redirected to the revision B published in November
2016 though it actually points to the original revision A published in
June 2013.
Let us update the link to point to the latest version, so that it
doesn't get stale anytime soon. Currently it points to v1.2 published in
March 2020(i.e. DEN0028C).
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-3-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
SMCCC 1.1 calls may use either HVC or SMC depending on the PSCI
conduit. Rather than coding this in every call site, provide a macro
which uses the correct instruction. The macro also handles the case
where no conduit is configured/available returning a not supported error
in res, along with returning the conduit used for the call.
This allow us to remove some duplicated code and will be useful later
when adding paravirtualized time hypervisor calls.
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This provides a mechanism for querying which paravirtualized time
features are available in this hypervisor.
Also add the header file which defines the ABI for the paravirtualized
time features we're about to add.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
SMCCC callers are currently amassing a collection of enums for the SMCCC
conduit, and are having to dig into the PSCI driver's internals in order
to figure out what to do.
Let's clean this up, with common SMCCC_CONDUIT_* definitions, and an
arm_smccc_1_1_get_conduit() helper that abstracts the PSCI driver's
internal state.
We can kill off the PSCI_CONDUIT_* definitions once we've migrated users
over to the new interface.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If someone has the silly idea to write something along those lines:
extern u64 foo(void);
void bar(struct arm_smccc_res *res)
{
arm_smccc_1_1_smc(0xbad, foo(), res);
}
they are in for a surprise, as this gets compiled as:
0000000000000588 <bar>:
588: a9be7bfd stp x29, x30, [sp, #-32]!
58c: 910003fd mov x29, sp
590: f9000bf3 str x19, [sp, #16]
594: aa0003f3 mov x19, x0
598: aa1e03e0 mov x0, x30
59c: 94000000 bl 0 <_mcount>
5a0: 94000000 bl 0 <foo>
5a4: aa0003e1 mov x1, x0
5a8: d4000003 smc #0x0
5ac: b4000073 cbz x19, 5b8 <bar+0x30>
5b0: a9000660 stp x0, x1, [x19]
5b4: a9010e62 stp x2, x3, [x19, #16]
5b8: f9400bf3 ldr x19, [sp, #16]
5bc: a8c27bfd ldp x29, x30, [sp], #32
5c0: d65f03c0 ret
5c4: d503201f nop
The call to foo "overwrites" the x0 register for the return value,
and we end up calling the wrong secure service.
A solution is to evaluate all the parameters before assigning
anything to specific registers, leading to the expected result:
0000000000000588 <bar>:
588: a9be7bfd stp x29, x30, [sp, #-32]!
58c: 910003fd mov x29, sp
590: f9000bf3 str x19, [sp, #16]
594: aa0003f3 mov x19, x0
598: aa1e03e0 mov x0, x30
59c: 94000000 bl 0 <_mcount>
5a0: 94000000 bl 0 <foo>
5a4: aa0003e1 mov x1, x0
5a8: d28175a0 mov x0, #0xbad
5ac: d4000003 smc #0x0
5b0: b4000073 cbz x19, 5bc <bar+0x34>
5b4: a9000660 stp x0, x1, [x19]
5b8: a9010e62 stp x2, x3, [x19, #16]
5bc: f9400bf3 ldr x19, [sp, #16]
5c0: a8c27bfd ldp x29, x30, [sp], #32
5c4: d65f03c0 ret
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
An unfortunate consequence of having a strong typing for the input
values to the SMC call is that it also affects the type of the
return values, limiting r0 to 32 bits and r{1,2,3} to whatever
was passed as an input.
Let's turn everything into "unsigned long", which satisfies the
requirements of both architectures, and allows for the full
range of return values.
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In order for the kernel to protect itself, let's call the SSBD mitigation
implemented by the higher exception level (either hypervisor or firmware)
on each transition between userspace and kernel.
We must take the PSCI conduit into account in order to target the
right exception level, hence the introduction of a runtime patching
callback.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We've so far used the PSCI return codes for SMCCC because they
were extremely similar. But with the new ARM DEN 0070A specification,
"NOT_REQUIRED" (-2) is clashing with PSCI's "PSCI_RET_INVALID_PARAMS".
Let's bite the bullet and add SMCCC specific return codes. Users
can be repainted as and when required.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
One of the major improvement of SMCCC v1.1 is that it only clobbers
the first 4 registers, both on 32 and 64bit. This means that it
becomes very easy to provide an inline version of the SMC call
primitive, and avoid performing a function call to stash the
registers that would otherwise be clobbered by SMCCC v1.0.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Function identifiers are a 32bit, unsigned quantity. But we never
tell so to the compiler, resulting in the following:
4ac: b26187e0 mov x0, #0xffffffff80000001
We thus rely on the firmware narrowing it for us, which is not
always a reasonable expectation.
Cc: stable@vger.kernel.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
A new feature of SMCCC 1.1 is that it offers firmware-based CPU
workarounds. In particular, SMCCC_ARCH_WORKAROUND_1 provides
BP hardening for CVE-2017-5715.
If the host has some mitigation for this issue, report that
we deal with it using SMCCC_ARCH_WORKAROUND_1, as we apply the
host workaround on every guest exit.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The new SMC Calling Convention (v1.1) allows for a reduced overhead
when calling into the firmware, and provides a new feature discovery
mechanism.
Make it visible to KVM guests.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit 680a0873e193 ("arm: kernel: Add SMC structure parameter") added
a new "quirk" parameter to the SMC and HVC SMCCC backends, but only
updated the comment for the SMC version. This patch adds the new
paramater to the comment describing the HVC version too.
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This patch adds a Qualcomm specific quirk to the arm_smccc_smc call.
On Qualcomm ARM64 platforms, the SMC call can return before it has
completed. If this occurs, the call can be restarted, but it requires
using the returned session ID value from the interrupted SMC call.
The quirk stores off the session ID from the interrupted call in the
quirk structure so that it can be used by the caller.
This patch folds in a fix given by Sricharan R:
https://lkml.org/lkml/2016/9/28/272
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This patch adds a quirk parameter to the arm_smccc_(smc/hvc) calls.
The quirk structure allows for specialized SMC operations due to SoC
specific requirements. The current arm_smccc_(smc/hvc) is renamed and
macros are used instead to specify the standard arm_smccc_(smc/hvc) or
the arm_smccc_(smc/hvc)_quirk function.
This patch and partial implementation was suggested by Will Deacon.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Adds helpers to do SMC and HVC based on ARM SMC Calling Convention.
CONFIG_HAVE_ARM_SMCCC is enabled for architectures that may support the
SMC or HVC instruction. It's the responsibility of the caller to know if
the SMC instruction is supported by the platform.
This patch doesn't provide an implementation of the declared functions.
Later patches will bring in implementations and set
CONFIG_HAVE_ARM_SMCCC for ARM and ARM64 respectively.
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
