summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2013-11-16Merge tag 'mfd-3.13-1' of ↵Linus Torvalds1-0/+52
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next Pull MFD updates from Samuel Ortiz: "For the 3.13 merge window we have a couple of new drivers for the AMS AS3722 PMIC and for STMicroelectronics STw481x PMIC. Although this is a smaller update than usual, we also have: - Device tree support for the max77693 driver - linux/of.h inclusion for all DT compatible MFD drivers, to avoid build breakage in the future - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver - A small arizona update for new wm5110 DSP registers and a few fixes - A small palmas update as well, including an of_device table addition and a few minor fixes - Two small mfd-core changes, one including a memory leak fix for when mfd_add_device() fails - Our usual round of minor cleanups and janitorial fixes" * tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (63 commits) Documentation: mfd: Update s2mps11.txt mfd: pm8921: Potential NULL dereference in pm8921_remove() mfd: Fix memory leak in mfd_add_devices() mfd: Stop setting refcounting pointers in original mfd_cell arrays mfd: wm5110: Enable micd clamp functionality mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCH mfd: max77693: Fix up bug of wrong interrupt number mfd: as3722: Don't export the regmap config mfd: twl6040: Remove obsolete cleanup for i2c clientdata mfd: tps65910: Remove warning during dt node parsing mfd: lpc_sch: Ignore resource conflicts when adding mfd cells mfd: ti_am335x_tscadc: Avoid possible deadlock of reg_lock mfd: syscon: Return -ENOSYS if CONFIG_MFD_SYSCON is not enabled mfd: Add support for ams AS3722 PMIC mfd: max77693: Include linux/of.h header mfd: tc3589x: Detect the precise version mfd: omap-usb: prepare/unprepare clock while enable/disable mfd: max77686: Include linux/of.h header mfd: max8907: Include linux/of.h header mfd: max8997: Include linux/of.h header ...
2013-11-12Merge tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds1-0/+42
Pull clock framework changes from Mike Turquette: "The clock changes for 3.13 are an even mix of framework improvements & bug fixes along with updates to existing clock drivers and the additional of new clock drivers" * tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux: clk: new driver for efm32 SoC clk: of: helper for determining number of parent clocks clk/zynq: Fix possible memory leak clk: keystone: Build Keystone clock drivers clk: keystone: Add gate control clock driver clk: keystone: add Keystone PLL clock driver Documentation: Add documentation for APM X-Gene clock binding clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC clk: Add APM X-Gene SoC clock driver clk: wm831x: get rid of the implementation of remove function clk: Correct lookup logic in clk_fetch_parent_index() clk: Use kcalloc() to allocate arrays clk: Add error handling to clk_fetch_parent_index()
2013-11-12Merge tag 'pinctrl-for-v3.13-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Main pin control pull request for the v3.13 cycle. The changes hitting arch/blackfin are ACKed by the Blackfin maintainer, and the device tree bindings are ACKed to the extent possible by someone from the device tree maintainers group. - Blackfin ADI pin control driver, we move yet another architecture under this subsystem umbrella. - Incremental updates to the Renesas Super-H PFC pin control driver. New subdriver for the r8a7791 SoC. - Non-linear GPIO ranges from the gpiolib side of things, this enabled simplified device tree bindings by referring entire groups of pins on some pin controller to act as back-end for a certain GPIO-chip driver. - Add the Abilis TB10x pin control driver used on the ARC architecture. Also the corresponding GPIO driver is merged through this tree, so the ARC has full support for pins and GPIOs after this. - Subdrivers for Freescale i.MX1, i.MX27 and i.MX50 pin controller instances. The i.MX1 and i.MX27 is an entirely new family (silicon) of controllers whereas i.MX50 is a variant of the previous supported controller. - Then the usual slew of fixes, cleanups and incremental updates" The ARC DT changes are apparently still pending, that hopefully gets sorted out in a timely manner. * tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) pinctrl: imx50: add pinctrl support code for the IMX50 SoC pinctrl: at91: copy define to driver pinctrl: remove minor dead code pinctrl: imx: fix using pin->input_val wrongly pinctrl: imx1: fix return value check in imx1_pinctrl_core_probe() gpio: tb10x: fix return value check in tb10x_gpio_probe() gpio: tb10x: use module_platform_driver to simplify the code pinctrl: imx27: imx27 pincontrol driver pinctrl: imx1 core driver pinctrl: sh-pfc: r8a7791 PFC support sh-pfc: r8a7778: Add CAN pin groups gpio: add TB10x GPIO driver pinctrl: at91: correct a few typos pinctrl: mvebu: remove redundant of_match_ptr pinctrl: tb10x: use module_platform_driver to simplify the code pinctrl: tb10x: fix the error handling in tb10x_pinctrl_probe() pinctrl: add documentation for pinctrl_get_group_pins() pinctrl: rockchip: emulate both edge triggered interrupts pinctrl: rockchip: add rk3188 specifics pinctrl: rockchip: remove redundant check ...
2013-11-05clk: new driver for efm32 SoCUwe Kleine-König1-0/+42
This patch adds support for the clocks provided by the Clock Management Unit of Energy Micro's efm32 Giant Gecko SoCs including device tree bindings. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-29Merge tag 'omap-for-v3.13/dt-late' of ↵Olof Johansson1-0/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Some more dts changes from Benoit Cousson <bcousson@baylibre.com> via Tony Lindgren: - Add a lot of N900 nodes - Add OPP table to OMAP5/DRA7 - Add support for Newflow NanoBone board - Add i2c aliases - Add McASP and audio support - Add reset/idle on init bindings for OMAP - Add more nodes for AM4272 * tag 'omap-for-v3.13/dt-late' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (42 commits) ARM: dts: omap5-uevm: Remove pinmux for dmic pins ARM: dts: omap5-uevm: Correct twl6040 reset GPIO pinmux ARM: dts: TWL4030: Add power button support ARM: dts: omap3-n900: Add LP5523 support ARM: dts: omap3-n900: Add TLV320AIC3X support ARM: dts: omap3-n900:: Mux RX51_LCD_RESET_GPIO in DTS ARM: dts: omap3-n900: Add NAND support ARM: dts: omap3-n900: Specify regulator info ARM: dts: TWL4030: Add missing regulators ARM: dts: omap3-n900: Add LP5523 support ARM: dts: omap3-n900: Add vibrator device ARM: dts: omap3-n900: GPIO key definitions ARM: dts: omap3-n900: Add support for SD cards ARM: dts: omap3-n900: Add UART support ARM: dts: omap3-n900: Fix i2c bus speed ARM: dts: omap3-n900: Add pinctrl for i2c devices ARM: dts: DRA7: Add CPU OPP table ARM: dts: OMAP5: Add CPU OPP table ARM: dts: dra7-evm: add smps123 supply for CPU ARM: dts: omap5-uevm: add smps123 supply for CPU ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-23mfd: Add support for ams AS3722 PMICLaxman Dewangan1-0/+52
The ams AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down controller, 11 LDOs, RTC, automatic battery, temperature and over-current monitoring, 8 GPIOs, ADC and a watchdog. Add MFD core driver for the AS3722 to support core functionality. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-20ARM: dts: AM4372: Update Support for EPOS EVMMugunthan V N1-0/+31
-> Adding pinmux for cpsw, i2c0. -> Enabling the modules that are present in AM4372 EPOS EVM These modules are tested on AM4372 EPOS EVM. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-18Merge tag 'omap-for-v3.13/board-removal-signed-take2' of ↵Kevin Hilman1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Changes needed to drop legacy booting support for some omap3 boards. Note that that these are based on a merge of the following for the dependencies: - v3.12-rc5 for fixes to pinctrl mask - omap-for-v3.13/dt-signed to avoid pointless merge conflicts - omap-for-v3.13/quirk-signed for legacy pdata handling * tag 'omap-for-v3.13/board-removal-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (125 commits) ARM: OMAP2+: remove legacy support for IGEP boards ARM: OMAP2+: Remove legacy support for zoom platforms ARM: OMAP2+: Remove legacy booting support for omap3 EVM ARM: OMAP2: delete board-rm680 ARM: dts: add minimal DT support for Nokia N950 & N9 phones ARM: dts: Add basic support for zoom3 ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM) ARM: dts: Add common support for omap3-evm ARM: dts: Shared file for omap GPMC connected smsc911x +Linux 3.12-rc5 Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-15Merge tag 'omap-for-v3.13/dt-signed' of ↵Kevin Hilman1-0/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: omap device tree related changes via Benoit Cousson <bcousson@baylibre.com>: Add the minimal DTS support for DRA7xx based SoC core. Add the initial support for N900 and gta04 phones. Enable USB3 on OMAP5 evm board. Add support for cryto accelerators Add new IGEP AQUILA board Add AM33XX EDMA support Update HSUSB node to use the reset-gpios fmwk * tag 'omap-for-v3.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (58 commits) ARM: dts: dra7-evm: Add mmc2 node for eMMC support ARM: dts: dra7-evm: Add mmc1 node for micro-sd support ARM: dts: omap5-uevm: mark TWL6037 as system-power-controller ARM: dts: omap3-igep0020: use standard constant for IRQ flags ARM: dts: omap3-igep0020: Add HS USB Host support ARM: dts: omap3-igep: Add USB OTG support ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display ARM: dts: AM33XX: Add LCDC info into am335x-evm ARM: dts: AM437X: Add DES node ARM: dts: AM437X: Add AES node ARM: dts: AM33XX: Fix AES interrupt number ARM: dts: AM33XX: Add AES data and documentation ARM: dts: AM33XX: Add SHAM data and documentation ARM: dts: OMAP4: Add DES3DES node ARM: dts: OMAP4: Add AES node ARM: dts: am335x-evm[sdk]: switch mmc1 to 4-bit mode ARM: dts: am335x-bone-common: correct mux mode for cmd line ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. ARM: dts: AM33XX: Add support for IGEP COM AQUILA ARM: dts: am335x-boneblack: move fixed regulator to board level ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-14Merge branches 'omap-for-v3.13/dt' and 'omap-for-v3.13/quirk' into ↵Tony Lindgren1-0/+50
omap-for-v3.13/board-removal We need the fixes in v3.12-rc5, dts changes in omap-for-v3.13/dt, and the platform data quirk changes in omap-for-v3.13/quirk to start removing omap3 board files without breaking things.
2013-10-08ARM: dts: Fix pinctrl mask for omap3Tony Lindgren1-3/+1
The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm boardR Sricharan1-0/+50
Add minimal device tree source needed for DRA7 based SoCs. Also add a board dts file for the dra7-evm (based on dra752) which contains 1.5G of memory with 1G interleaved and 512MB non-interleaved. Also added in the board file are pin configuration details for i2c, mcspi and uart devices on board. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-27pinctrl: at91: fix typosBoris BREZILLON1-1/+1
Fix AT91_PINCTRL_DEBOUNCE_VAL dt macro typo. Fix at91_pinctrl_mux_ops callback typos. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26mfd: dbx500: Remove any mention of the BML8580CLKLee Jones1-14/+13
The platform which it pertains to is no longer supported and is actually causing some confusion in the new common clock implementation. A recent patch removed its use in the clock driver, let's take out the definitions too. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26mfd: dbx500-prcmu: Move PRCMU numerical clock identifiers into DT include fileLee Jones1-0/+84
These are required to request DBx500 PRCMU clocks from Device Tree. The numbers used are taken directly from the Hardware Specification document. We're moving them from the DBx500 PRCMU include file into the DT include directory and referencing them from the former via a #include. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-11Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-0/+525
Pull device tree core updates from Grant Likely: "Generally minor changes. A bunch of bug fixes, particularly for initialization and some refactoring. Most notable change if feeding the entire flattened tree into the random pool at boot. May not be significant, but shouldn't hurt either" Tim Bird questions whether the boot time cost of the random feeding may be noticeable. And "add_device_randomness()" is definitely not some speed deamon of a function. * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: of/platform: add error reporting to of_amba_device_create() irq/of: Fix comment typo for irq_of_parse_and_map of: Feed entire flattened device tree into the random pool of/fdt: Clean up casting in unflattening path of/fdt: Remove duplicate memory clearing on FDT unflattening gpio: implement gpio-ranges binding document fix of: call __of_parse_phandle_with_args from of_parse_phandle of: introduce of_parse_phandle_with_fixed_args of: move of_parse_phandle() of: move documentation of of_parse_phandle_with_args of: Fix missing memory initialization on FDT unflattening of: consolidate definition of early_init_dt_alloc_memory_arch() of: Make of_get_phy_mode() return int i.s.o. const int include: dt-binding: input: create a DT header defining key codes. of/platform: Staticize of_platform_device_create_pdata() of: Specify initrd location using 64-bit dt: Typo fix OF: make of_property_for_each_{u32|string}() use parameters if OF is not enabled
2013-09-10Merge tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds1-0/+178
Pull clock framework changes from Michael Turquette: "The common clk framework changes for 3.12 are dominated by clock driver patches, both new drivers and fixes to existing. A high percentage of these are for Samsung platforms like Exynos. Core framework fixes and some new features like automagical clock re-parenting round out the patches" * tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux: (102 commits) clk: only call get_parent if there is one clk: samsung: exynos5250: Simplify registration of PLL rate tables clk: samsung: exynos4: Register PLL rate tables for Exynos4x12 clk: samsung: exynos4: Register PLL rate tables for Exynos4210 clk: samsung: exynos4: Reorder registration of mout_vpllsrc clk: samsung: pll: Add support for rate configuration of PLL46xx clk: samsung: pll: Use new registration method for PLL46xx clk: samsung: pll: Add support for rate configuration of PLL45xx clk: samsung: pll: Use new registration method for PLL45xx clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_plls clk: samsung: exynos4: Remove checks for DT node clk: samsung: exynos4: Remove unused static clkdev aliases clk: samsung: Modify _get_rate() helper to use __clk_lookup() clk: samsung: exynos4: Use separate aliases for cpufreq related clocks clocksource: samsung_pwm_timer: Get clock from device tree ARM: dts: exynos4: Specify PWM clocks in PWM node pwm: samsung: Update DT bindings documentation to cover clocks clk: Move symbol export to proper location clk: fix new_parent dereference before null check clk: wm831x: Initialise wm831x pointer on init ...
2013-09-07Merge tag 'dt-for-linus' of ↵Linus Torvalds1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
2013-09-05Merge tag 'sound-3.12' of ↵Linus Torvalds1-0/+56
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Changes are seen in a wide range of codes, mainly due to ASoC DAPM requirements; HD-audio shows a high peak in diffstat, it's just a removal of bunch of old static quirks. Some highlights: - HDPM: Updates for AIO/RayDAT support, TCO/sync support - RME96: Add PCM sync support - HD-audio: * A few HDMI/DP audio updates (CA assignment fix, stream switching fix, Intel DP device list support) * Device specific fixes (ASUS/CXT HP mic support, Thinkpad mic improvements, Chromebook fixes, STAC9228 Dell fixes) * Replace the all static quirks for AD codecs with the generic parser * WAKEEN support for handling irqs in the power saving mode - USB-audio: Clean up implicit fb handling and related codes - DAPM is now mandatory for ASoC CODEC drivers; all existing drivers have had some level of DAPM support added. In addition, a lot of cleanups and improvements in DAPM. - Support for ASoC cross-platform compile test - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997 - DT bindings for kirkwood and i.MX S/PDIF - Clean up and bug fixes: ssm2602, rt5640 and sgtl5000. - Core helpers for bitbanged AC'97 reset" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits) ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switches ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional ASoC: soc-pcm: Allow to specify unidirectional dai_link ASoC: fsl_spdif: Staticse non-exported symbols ASoC: ssm2602: Fix cache sync ASoC: Remove unused sysfs_registered field from snd_soc_codec struct ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} struct ASoC: Remove unused control_type field from snd_soc_codec struct ASoC: fsl: Add one blank space after ':=' in Makefile ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.c ASoC: rt5640: change widget sequence for depop ASoC: dapm: Fix auto-disable for inverted controls ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIF ASoC: Samsung: Do not queue cyclic buffers multiple times ASoC: ep93xx-i2s: Remove unnecessary dev_set_drvdata() ASoC: designware_i2s: Remove unnecessary dev_set_drvdata() ASoC: fsl_spdif: remove redundant dev_err call in fsl_spdif_probe() ASoC: fsl: Add S/PDIF machine driver ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards ...
2013-09-03pwm: Add PWM polarity flag macro for DTLaurent Pinchart1-0/+14
Define a PWM_POLARITY_INVERTED macro in include/dt-bindings/pwm/pwm.h to be used by device tree sources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-08-28Merge tag 'v3.11-rc7' into devicetree/nextGrant Likely2-2/+4
Linux 3.11-rc7
2013-08-22Merge remote-tracking branch 'asoc/topic/ac97' into asoc-fslMark Brown2-2/+4
2013-08-21Merge tag 'ux500-devicetree-for-v3.12-1' of ↵Kevin Hilman1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From: Linus Walleij: Ux500 device tree enablement base for the v3.12 development cycle: - Various cleanups like remove non-existant hardware from the Snowball device tree, prefix all files with "ste-*" - External regulators - Documentation updates - Delete some minor dangling platform data - Pin control settings for U8540 through DT * tag 'ux500-devicetree-for-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (22 commits) ARM: ux500: fix devicetree builds ARM: ux500: Remove u9540.dts as it's been replaced ARM: ux500: Apply a ste-* prefix onto dbx5x0.dtsi ARM: ux500: Apply a ste-* prefix onto stuib.dtsi ARM: ux500: Apply a ste-* prefix onto hrefv60plus.dts ARM: ux500: Apply a ste-* prefix onto hrefprev60.dts Signed-off-by: Lee Jones <lee.jones@linaro.org> ARM: ux500: Apply a ste-* prefix onto href.dtsi ARM: ux500: Apply a ste-* prefix onto ccu9540.dts ARM: ux500: Apply a ste-* prefix onto ccu8540.dts ARM: ux500: Apply a ste-* prefix onto snowball.dts ARM: ux500: Remove Snowball DTS entry for ROHM BH1780GLI ambient light sensor ARM: ux500: Remove Snowball DTS entry for TPS61052 chip ARM: ux500: Remove Snowball DTS entry for National Semiconductor LP5521 LED chip ARM: ux500: Remove Toshiba TC35892 I/O Expander's DT entry from Snowball's DTS ARM: u8540: DT: Set pinctrl mapping to i2c0,1,2,4 & 5 ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2 ARM: ux500: Stop passing MMC's platform data for Device Tree boots Documentation: Update binding for Nomadik and DBx5x based platforms ARM: ux500: Supply external regulator names for Snowball's DT ARM: ux500: Provide a supply name for the AB8500 AUX regulators to use ...
2013-08-20include: dt-binding: input: create a DT header defining key codes.Laxman Dewangan1-0/+525
Many of Key device tree bindings uses the constant number as key code which matches with kernel header key code and then comment as follows for reference/better readability: linux,code = <102>; /* KEY_HOME */ Create a DT header which defines all the key code so that DT key bindings can use it as follows: linux,code = <KEY_HOME>; Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-08-16ASoC: imx-audmux: Move definitions to dt-bindingsMarkus Pargmann1-0/+56
Move imx-audmux macro definitions to include/dt-bindings, so they can be used for devicetree. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-07ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2Gabriel Fernandez1-0/+36
This patch adds pinctrl device tree settings for uart0 and uart2 for ccu8540 board. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-05clk: samsung: Add clock driver for S3C64xx SoCsTomasz Figa1-0/+178
This patch adds new, Common Clock Framework-based clock driver for Samsung S3C64xx SoCs. The driver is just added, without actually letting the platforms use it yet, since this requires more intermediate steps. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29Merge tag 'pinctrl-for-v3.11-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Driver fixes for AM33xx, SIRF and PFC pin controllers - Fix a compile warning from the pinctrl single-register driver - Fix a little nasty memory leak * tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix a memleak when freeing maps pinctrl: pinctrl-single: fix compile warning when no CONFIG_PM pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DT arm/dts: sirf: fix the pingroup name mismatch between drivers and dts pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl pinctrl: sirf: fix the pin number and mux bit for usp0 pinctrl: am33xx dt binding: correct include path
2013-07-21pinctrl: am33xx dt binding: correct include pathIan Campbell1-1/+1
Using #include <include/...> is a bit odd. It happens to work because the DTC flags include -Iarch/FOO/boot/dts as well as arch/FOO/boot/dts/include and arch/FOO/boot/dts/include/dt-bindings is a symlink to include/dt-bindings. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-15ARM: imx: fix vf610 enet module clock selectionShawn Guo1-1/+3
The fec/enet driver calculates MDC rate with the formula below. ref_freq / ((MII_SPEED + 1) x 2) The ref_freq here is the fec internal module clock, which is missing from clk-vf610 clock driver right now. And clk-vf610 driver mistakenly supplies RMII clock (50 MHz) as the source to fec. This results in the situation that fec driver gets ref_freq as 50 MHz, while physically it runs at 66 MHz (fec module clock physically sources from ipg which runs at 66 MHz). That's why software expects MDC runs at 2.5 MHz, while the measurement tells it runs at 3.3 MHz. And this causes the PHY KSZ8041 keeps swithing between Full and Half mode as below. libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half Add the missing module clock for ENET0 and ENET1, and correct the clock supplying in device tree to fix above issue. Thanks to Alison Wang <b18965@freescale.com> for debugging the issue. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-03Merge tag 'pinctrl-for-v3.11-1' of ↵Linus Torvalds1-0/+32
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
2013-07-03Merge tag 'drivers-for-linus' of ↵Linus Torvalds1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
2013-06-21Merge branch 'for_3.11/dts' of ↵Arnd Bergmann2-0/+97
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt From Benoit Cousson: omap devicetree changes for v3.11 merge window - Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. - Introduce new AM43x silicon. * 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits) ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ARM: dts: omap3-overo: Add default trigger for TWL4030 LED ARM: dts: omap3-tobi: Correct polarity for GPIO LED ARM: dts: omap3-tobi: Add SMSC911X node ARM: dts: OMAP3: Include IRQ header ARM: dts: Protect pinctrl headers against multiple inclusions ARM: AM33XX: clock data: Enable clkout2 as part of init ARM: AM33XX: clock: Add debugSS clock nodes ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm ARM: dts: AM33XX: Add PWMSS device tree nodes ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
2013-06-21Merge tag 'common-clk-audio' of ↵Arnd Bergmann1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim: based on exynos-dt-2 and s3c24xx-dt-2 - use #include for all Samsung DT - add clk for exynos audio subsystem (audss) and i2s - support audss and i2s for exynos5250 * tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann2-0/+311
into next/dt This is a dependency for imx/dt Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-19ARM: dts: Protect pinctrl headers against multiple inclusionsFlorian Vaussard2-0/+10
Pinctrl headers were not protected with #ifndef. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Specific pinctrl headerFlorian Vaussard1-0/+37
The pinctrl IP inside the AM33XX family differs slightly from what is found on OMAP2+. Define a specific header to take account of the differences. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP2+: Header file for pinctrl constantsFlorian Vaussard1-0/+50
Most of the constants are taken from arch/arm/mach-omap2/mux.h. Define some others for the PIN_OUTPUT_* flavours. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18clk: samsung: register audio subsystem clocks using common clock frameworkPadmavathi Venna1-0/+25
Audio subsystem is introduced in s5pv210 and exynos platforms. This has seperate clock controller which can control i2s0 and pcm0 clocks. This patch registers the audio subsystem clocks with the common clock framework on Exynos family. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-17ARM: imx: add VF610 clock supportJingchang Lu1-0/+163
Add clock support for Vybrid VF610. It uses dtc macro support to define all clock IDs in vf610-clock.h to keep clock IDs coherence between kernel and DT. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: add clock support for imx6slShawn Guo1-0/+148
Add clock support for i.MX6 SoloLite. It uses the dtc marco support to define all clock IDs in imx6sl-clock.h, which will be included by both clock driver and device tree sources, so that the data will stay sync all the time between kernel and DT. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-16pinctrl: add pinctrl driver for Rockchip SoCsHeiko Stübner1-0/+32
This driver adds support the Cortex-A9 based SoCs from Rockchip, so at least the RK2928, RK3066 (a and b) and RK3188. Earlier Rockchip SoCs seem to use similar mechanics for gpio handling so should be supportable with relative small changes. Pull handling on the rk3188 is currently a stub, due to it being a bit different to the earlier SoCs. Pinmuxing as well as gpio (and interrupt-) handling tested on a rk3066a based machine. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-15Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtOlof Johansson1-0/+27
From Nicolas Ferre: Again some nice DT updates for AT91: - DMA binding update with one patch shared with slave-dma tree - more SPI DT activation - enable the USB gadget HS for DT platforms * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91: sam9m10g45ek add udc DT support ARM: at91: sam9g45 add udc DT support ARM: at91: sam9x5ek add udc DT support ARM: at91: sam9x5 add udc DT support ARM: at91: dt: at91sam9x5: add SPI DMA client infos ARM: at91: dt: switch DMA DT bindings to pre-processor ARM: at91: dt: add header to define at_hdmac configuration
2013-06-15Merge tag 'tegra-for-3.11-dt' of ↵Olof Johansson4-0/+815
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt From Stephen Warren: ARM: tegra: device tree updates This branch contains all device tree updates for Tegra boards. The changes are: * Converted all DT files to use the C pre-processor, to support the use of named constants. This included use of defines for GPIO, IRQ, and clock constants. * Enabling new features such as: - SPI on Dalmore. - Audio on Dalmore and Beaver. - gpio-leds on Beaver. - Power-supply/batter linkage on Dalmore. * A minor fix to the RAM size node on Beaver. It is based on previous pull request tegra-for-3.11-deps-for-usb followed by a merge of tegra-for-3.11-deps-for-clk. * tag 'tegra-for-3.11-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (21 commits) ARM: tegra: enable audio on Beaver ARM: tegra: enable audio on Dalmore ARM: tegra: add power-supplies link between battery and charger ARM: tegra: add audio-related nodes to Tegra114 DT ARM: tegra114: convert device tree files to use CLK defines ARM: tegra30: convert device tree files to use CLK defines ARM: tegra20: convert device tree files to use CLK defines ARM: tegra: Add charger subnode to tps65090 node ARM: tegra: convert device tree files to use IRQ defines ARM: tegra: convert device tree files to use GPIO defines ARM: tegra: create a DT header defining GPIO IDs ARM: tegra: use #include for all device trees ARM: tegra: Add gpio-leds to Tegra30 Beaver ARM: tegra: fix memory size on Beaver ARM: tegra: enable spi4 on Dalmore ARM: tegra114: create a DT header defining CLK IDs ARM: tegra30: create a DT header defining CLK IDs ARM: tegra20: create a DT header defining CLK IDs ARM: tegra: update device trees for USB binding rework ARM: tegra: modify ULPI reset GPIO properties ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-15ARM: at91: dt: add header to define at_hdmac configurationLudovic Desroches1-0/+27
DMA-cell content is a concatenation of several values. In order to keep this stuff human readable, macros are introduced. The values for the FIFO configuration are not the same as the ones used in the configuration register in order to keep backward compatibility. Most devices use the half FIFO configuration but USART ones have to use the ASAP configuration. This parameter was not initially planed to be into the at91 dma dt binding. The third cell will be used to store this parameter, it will become a concatenation of the FIFO configuration and of the peripheral ID. In order to keep backward compatibility i.e. FIFO configuration is equal to 0, we have to perform a translation since the value to put in the register to set half FIFO is 1. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-29ARM: tegra: create a DT header defining GPIO IDsStephen Warren1-0/+50
All Tegra GPIOs are named after the GPIO bank and GPIO number within the bank. Define a macro to calculate the GPIO ID based on those parameters. Make the macro available via all Tegra .dtsip files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-29ARM: tegra114: create a DT header defining CLK IDsHiroshi Doyu1-0/+342
Create a header file to define the clock IDs used by the Tegra114 clock binding. Remove the list of definitions from the binding documentation, and refer the reader to the header file. This will allow the same header to be used by both device tree files, and drivers implementing this binding, which guarantees that the two stay in sync. This also makes device trees more readable by using names instead of magic numbers. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, add header to clock/ instead of clk/ to match binding location] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-29ARM: tegra30: create a DT header defining CLK IDsHiroshi Doyu1-0/+265
Create a header file to define the clock IDs used by the Tegra30 clock binding. Remove the list of definitions from the binding documentation, and refer the reader to the header file. This will allow the same header to be used by both device tree files, and drivers implementing this binding, which guarantees that the two stay in sync. This also makes device trees more readable by using names instead of magic numbers. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, add header to clock/ instead of clk/ to match binding location] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-29ARM: tegra20: create a DT header defining CLK IDsHiroshi Doyu1-0/+158
Create a header file to define the clock IDs used by the Tegra20 clock binding. Remove the list of definitions from the binding documentation, and refer the reader to the header file. This will allow the same header to be used by both device tree files, and drivers implementing this binding, which guarantees that the two stay in sync. This also makes device trees more readable by using names instead of magic numbers. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, add header to clock/ instead of clk/ to match binding location] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-17ARM: at91: dt: add pinctrl pre-processor defineJean-Christophe PLAGNIOL-VILLARD1-0/+35
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>