summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)AuthorFilesLines
2021-09-27pinctrl: starfive: Add pinctrl driver for the JH7100 SoCEmil Renner Berthing1-0/+274
This adds a combined pinctrl and gpio driver for the StarFive Ltd. JH7100 RISC-V SoC [1]. For each "GPIO" there are two registers for configuring the output and output enable signals, which may come from other peripherals, and controlling the GPIOs from software amounts to setting these signals to constant 0 or constant 1. In other words the same registers are used for both pinmuxing and controlling the GPIOs, which makes it easier to combine the pinctrl and gpio driver in one. The gpio code is adapted from the gpio driver in the vendor tree written by Huan Feng with cleanups and fixes by Drew and me. [1] https://github.com/starfive-tech/beaglev_doc Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Drew Fustini <drew@beagleboard.org>
2021-09-27[WIP] dt-bindings: reset: starfive: Add JH7100 Reset DefinitionsGeert Uytterhoeven1-0/+126
Add all resets for the StarFive JH7100 Reset Controller. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-09-27[WIP] dt-bindings: clock: starfive: Add JH7100 Clock DefinitionsGeert Uytterhoeven1-0/+202
Add all clock outputs for the StarFive JH7100 Clock Generator. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-09-07Merge tag 'linux-watchdog-5.15-rc1' of ↵Linus Torvalds1-0/+29
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add Mediatek MT7986 & MT8195 wdt support - add Maxim MAX63xx - drop bd70528 support - rewrite ixp4xx to watchdog framework - constify static struct watchdog_ops for sl28cpld_wdt, mpc8xxx_wdt and tqmx86 - introduce watchdog_dev_suspend/resume - several fixes and improvements * tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: Add compatible for Mediatek MT7986 watchdog: ixp4xx: Rewrite driver to use core watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate watchdog: max63xx_wdt: Add device tree probing dt-bindings: watchdog: Add Maxim MAX63xx bindings watchdog: mediatek: mt8195: add wdt support dt-bindings: reset: mt8195: add toprgu reset-controller header file watchdog: tqmx86: Constify static struct watchdog_ops watchdog: mpc8xxx_wdt: Constify static struct watchdog_ops watchdog: sl28cpld_wdt: Constify static struct watchdog_ops watchdog: iTCO_wdt: Fix detection of SMI-off case watchdog: bcm2835_wdt: consider system-power-controller property watchdog: imx2_wdg: notify wdog core to stop ping worker on suspend watchdog: introduce watchdog_dev_suspend/resume watchdog: Fix NULL pointer dereference when releasing cdev watchdog: only run driver set_pretimeout op if device supports it watchdog: bd70528 drop bd70528 support
2021-09-03Merge tag 'pinctrl-v5.15-1' of ↵Linus Torvalds4-0/+2454
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...
2021-09-03Merge tag 'clk-for-linus' of ↵Linus Torvalds13-2/+1487
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Nothing changed in the clk framework core this time around. We did get some updates to the basic clk types to use determine_rate for the divider type and add a power of two fractional divider flag though. Otherwise, this is a collection of clk driver updates. More than half the diffstat is in the Qualcomm clk driver where we add a bunch of data to describe clks on various SoCs and fix bugs. The other big new thing in here is the Mediatek MT8192 clk driver. That's been under review for a while and it's nice to see that it's finally upstream. Beyond that it's the usual set of minor fixes and tweaks to clk drivers. There are some non-clk driver bits in here which have all been acked by the respective maintainers. New Drivers: - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs - Add display (DU and DSI) clocks on Renesas R-Car V3U - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and resets on Renesas RZ/G2L Updates: - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators - Add power of two flag to fractional divider clk type - Migrate some clk drivers to clk_divider_ops.determine_rate - Migrate to clk_parent_data in gcc-sdm660 - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2 - Switch from .round_rate to .determine_rate in clk-divider-gate - Fix clock tree update for TF-A controlled clocks for all i.MX8M - Add missing M7 core clock for i.MX8MN - YAML conversion of rk3399 clock controller binding - Removal of GRF dependency for the rk3328/rk3036 pll types - Drop CLK_IS_CRITICAL flag from Tegra fuse clk - Make CLK_R9A06G032 Kconfig symbol invisible - Convert various DT bindings to YAML" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits) dt-bindings: clock: samsung: fix header path in example clk: tegra: fix old-style declaration clk: qcom: Add SM6350 GCC driver MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: clk-generated: Limit the requested rate to our range clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type ...
2021-09-03Merge tag 'mailbox-v5.15' of ↵Linus Torvalds2-0/+1147
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mtk: - added support for mt8192 and mt8195 - minor fix regarding address shift - qcom: - added compatibles for MSM8953, SM6350 and SM6115 - enable loading IPCC as a module - misc: - change Altera maintainer - fix sti kernel-doc warnings * tag 'mailbox-v5.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: cmdq: add multi-gce clocks support for mt8195 mailbox: cmdq: add mediatek mailbox support for mt8195 dt-bindings: gce: add gce header file for mt8195 dt-bindings: mailbox: add definition for mt8195 mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC dt-bindings: mailbox: Add compatible for the MSM8953 dt-bindings: mailbox: qcom-ipcc: Add compatible for SM6350 mailbox: qcom: Add support for SM6115 APCS IPC dt-bindings: mailbox: qcom: Add SM6115 APCS compatible soc: mediatek: cmdq: add address shift in jump mailbox: cmdq: add mt8192 support dt-binding: gce: add gce header file for mt8192 MAINTAINERS: Replace Ley Foon Tan as Altera Mailbox maintainer mailbox: qcom-ipcc: Enable loading QCOM_IPCC as a module mailbox: sti: quieten kernel-doc warnings
2021-09-02Merge tag 'devicetree-for-5.15' of ↵Linus Torvalds2-188/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refactor arch kdump DT related code to a common implementation - Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight', 'resets', and 'pwm' properties - Various clean-ups to DT FDT code - Fix a runtime error for !CONFIG_SYSFS - Convert Synopsys DW PCI and derivative binding docs to schemas. Add Toshiba Visconti PCIe binding. - Convert a bunch of memory controller bindings to schemas - Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards, brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema. - Extend nvmem bindings to handle bit offsets in unit-addresses - Add DT schemas for HiKey 970 PCIe PHY - Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings - Enable dtc pci_device_reg warning by default - Fixes for handling 'unevaluatedProperties' in preparation to enable pending support in the tooling for jsonschema 2020-12 draft * tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) dt-bindings: display: remove zte,vou.txt binding doc dt-bindings: hwmon: merge max1619 into trivial devices dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries dt-bindings: Add vendor prefix for Topic Embedded Systems of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr() arm64: kdump: Remove custom linux,usable-memory-range handling arm64: kdump: Remove custom linux,elfcorehdr handling riscv: Remove non-standard linux,elfcorehdr handling of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef of: fdt: Add generic support for handling usable memory range property of: fdt: Add generic support for handling elf core headers property crash_dump: Make elfcorehdr address/size symbols always visible dt-bindings: memory: convert Samsung Exynos DMC to dtschema dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema kbuild: Enable dtc 'pci_device_reg' warning by default dt-bindings: soc: remove obsolete zte zx header dt-bindings: clock: remove obsolete zte zx header ...
2021-09-02Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+1
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ...
2021-09-02Merge branches 'clk-kirkwood', 'clk-imx', 'clk-doc', 'clk-zynq' and ↵Stephen Boyd1-1/+3
'clk-ralink' into clk-next * clk-kirkwood: clk: kirkwood: Fix a clocking boot regression * clk-imx: clk: imx8mn: Add M7 core clock clk: imx8m: fix clock tree update of TF-A managed clocks clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate clk: imx8mn: use correct mux type for clkout path clk: imx8mm: use correct mux type for clkout path * clk-doc: dt-bindings: clock: samsung: fix header path in example MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: sama7g5: remove all kernel-doc & kernel-doc warnings clk: zynqmp: fix kernel doc * clk-zynq: clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type * clk-ralink: clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
2021-09-02Merge branches 'clk-nvidia', 'clk-rockchip', 'clk-at91' and 'clk-vc5' into ↵Stephen Boyd1-0/+1
clk-next - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators * clk-nvidia: clk: tegra: fix old-style declaration clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> * clk-rockchip: clk: rockchip: make rk3308 ddrphy4x clock critical clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types dt-bindings: clk: Convert rockchip,rk3399-cru to DT schema clk: rockchip: Add support for hclk_sfc on rk3036 clk: rockchip: rk3036: fix up the sclk_sfc parent error clk: rockchip: add dt-binding clkid for hclk_sfc on rk3036 * clk-at91: clk: at91: clk-generated: Limit the requested rate to our range * clk-vc5: clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds2-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-09-02Merge branches 'clk-renesas', 'clk-cleanup' and 'clk-determine-divider' into ↵Stephen Boyd1-0/+1
clk-next - Migrate some clk drivers to clk_divider_ops.determine_rate * clk-renesas: clk: renesas: Make CLK_R9A06G032 invisible clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2 dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock clk: renesas: r9a07g044: Add clock and reset entries for ADC clk: renesas: r9a07g044: Add clock and reset entries for CANFD clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch] clk: renesas: r9a07g044: Add GPIO clock and reset entries clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries clk: renesas: r9a07g044: Add USB clocks/resets clk: renesas: r9a07g044: Add DMAC clocks/resets clk: renesas: r9a07g044: Add I2C clocks/resets clk: renesas: r8a779a0: Add the DSI clocks clk: renesas: r8a779a0: Add the DU clock clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get() clk: renesas: rzg2l: Avoid mixing error pointers and NULL clk: renesas: rzg2l: Fix a double free on error clk: renesas: rzg2l: Fix return value and unused assignment clk: renesas: rzg2l: Remove unneeded semicolon * clk-cleanup: clk: palmas: Add a missing SPDX license header clk: Align provider-specific CLK_* bit definitions * clk-determine-divider: clk: stm32mp1: Switch to clk_divider.determine_rate clk: stm32h7: Switch to clk_divider.determine_rate clk: stm32f4: Switch to clk_divider.determine_rate clk: bcm2835: Switch to clk_divider.determine_rate clk: divider: Implement and wire up .determine_rate by default
2021-09-02Merge branches 'clk-qcom', 'clk-socfpga', 'clk-mediatek', 'clk-lmk' and ↵Stephen Boyd11-1/+1483
'clk-x86' into clk-next - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - Migrate to clk_parent_data in gcc-sdm660 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs * clk-qcom: (38 commits) clk: qcom: Add SM6350 GCC driver dt-bindings: clock: Add SM6350 GCC clock bindings clk: qcom: rpmh: Add support for RPMH clocks on SM6350 dt-bindings: clock: Add RPMHCC bindings for SM6350 clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250 clk: qcom: Add Global Clock controller (GCC) driver for SM6115 dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCC clk: qcom: mmcc-msm8994: Add MSM8992 support clk: qcom: Add msm8994 MMCC driver dt-bindings: clock: Add support for MSM8992/4 MMCC clk: qcom: Add Global Clock Controller driver for MSM8953 dt-bindings: clock: add Qualcomm MSM8953 GCC driver bindings clk: qcom: gcc-sdm660: Replace usage of parent_names clk: qcom: gcc-sdm660: Move parent tables after PLLs clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create PM: runtime: add devm_pm_clk_create helper PM: runtime: add devm_pm_runtime_enable helper clk: qcom: a53-pll: Add MSM8939 a53pll support dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support clk: qcom: a53pll/mux: Use unique clock name ... * clk-socfpga: clk: socfpga: agilex: add the bypass register for s2f_usr0 clock clk: socfpga: agilex: fix up s2f_user0_clk representation clk: socfpga: agilex: fix the parents of the psi_ref_clk * clk-mediatek: (22 commits) clk: mediatek: make COMMON_CLK_MT8167* depend on COMMON_CLK_MT8167 clk: mediatek: Add MT8192 vencsys clock support clk: mediatek: Add MT8192 vdecsys clock support clk: mediatek: Add MT8192 scp adsp clock support clk: mediatek: Add MT8192 msdc clock support clk: mediatek: Add MT8192 mmsys clock support clk: mediatek: Add MT8192 mfgcfg clock support clk: mediatek: Add MT8192 mdpsys clock support clk: mediatek: Add MT8192 ipesys clock support clk: mediatek: Add MT8192 imp i2c wrapper clock support clk: mediatek: Add MT8192 imgsys clock support clk: mediatek: Add MT8192 camsys clock support clk: mediatek: Add MT8192 audio clock support clk: mediatek: Add MT8192 basic clocks support clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers clk: mediatek: Add configurable enable control to mtk_pll_data clk: mediatek: Fix asymmetrical PLL enable and disable control clk: mediatek: Get regmap without syscon compatible check clk: mediatek: Add dt-bindings of MT8192 clocks dt-bindings: ARM: Mediatek: Add audsys document binding for MT8192 ... * clk-lmk: clk: lmk04832: drop redundant fallthrough statements * clk-x86: clk: x86: Rename clk-lpt to more specific clk-lpss-atom
2021-09-01Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+2
Pull drm updates from Dave Airlie: "Highlights: - i915 has seen a lot of refactoring and uAPI cleanups due to a change in the upstream direction going forward This has all been audited with known userspace, but there may be some pitfalls that were missed. - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs - i915 enables Jasper and Elkhart Lake by default and has preliminary XeHP/DG2 support - amdgpu adds support for Cyan Skillfish - lots of implicit fencing rules documented and fixed up in drivers - msm now uses the core scheduler - the irq midlayer has been removed for non-legacy drivers - the sysfb code now works on more than x86. Otherwise the usual smattering of stuff everywhere, panels, bridges, refactorings. Detailed summary: core: - extract i915 eDP backlight into core - DP aux bus support - drm_device.irq_enabled removed - port drivers to native irq interfaces - export gem shadow plane handling for vgem - print proper driver name in framebuffer registration - driver fixes for implicit fencing rules - ARM fixed rate compression modifier added - updated fb damage handling - rmfb ioctl logging/docs - drop drm_gem_object_put_locked - define DRM_FORMAT_MAX_PLANES - add gem fb vmap/vunmap helpers - add lockdep_assert(once) helpers - mark drm irq midlayer as legacy - use offset adjusted bo mapping conversion vgaarb: - cleanups fbdev: - extend efifb handling to all arches - div by 0 fixes for multiple drivers udmabuf: - add hugepage mapping support dma-buf: - non-dynamic exporter fixups - document implicit fencing rules amdgpu: - Initial Cyan Skillfish support - switch virtual DCE over to vkms based atomic - VCN/JPEG power down fixes - NAVI PCIE link handling fixes - AMD HDMI freesync fixes - Yellow Carp + Beige Goby fixes - Clockgating/S0ix/SMU/EEPROM fixes - embed hw fence in job - rework dma-resv handling - ensure eviction to system ram amdkfd: - uapi: SVM address range query added - sysfs leak fix - GPUVM TLB optimizations - vmfault/migration counters i915: - Enable JSL and EHL by default - preliminary XeHP/DG2 support - remove all CNL support (never shipped) - move to TTM for discrete memory support - allow mixed object mmap handling - GEM uAPI spring cleaning - add I915_MMAP_OBJECT_FIXED - reinstate ADL-P mmap ioctls - drop a bunch of unused by userspace features - disable and remove GPU relocations - revert some i915 misfeatures - major refactoring of GuC for Gen11+ - execbuffer object locking separate step - reject caching/set-domain on discrete - Enable pipe DMC loading on XE-LPD and ADL-P - add PSF GV point support - Refactor and fix DDI buffer translations - Clean up FBC CFB allocation code - Finish INTEL_GEN() and friends macro conversions nouveau: - add eDP backlight support - implicit fence fix msm: - a680/7c3 support - drm/scheduler conversion panfrost: - rework GPU reset virtio: - fix fencing for planes ast: - add detect support bochs: - move to tiny GPU driver vc4: - use hotplug irqs - HDMI codec support vmwgfx: - use internal vmware device headers ingenic: - demidlayering irq rcar-du: - shutdown fixes - convert to bridge connector helpers zynqmp-dsub: - misc fixes mgag200: - convert PLL handling to atomic mediatek: - MT8133 AAL support - gem mmap object support - MT8167 support etnaviv: - NXP Layerscape LS1028A SoC support - GEM mmap cleanups tegra: - new user API exynos: - missing unlock fix - build warning fix - use refcount_t" * tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits) drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box drm/amd/display: Remove duplicate dml init drm/amd/display: Update bounding box states (v2) drm/amd/display: Update number of DCN3 clock states drm/amdgpu: disable GFX CGCG in aldebaran drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amdgpu: Add support for RAS XGMI err query drm/amdkfd: Account for SH/SE count when setting up cu masks. drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain drm/amdgpu: drop redundant cancel_delayed_work_sync call drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend drm/amdkfd: map SVM range with correct access permission drm/amdkfd: check access permisson to restore retry fault drm/amdgpu: Update RAS XGMI Error Query drm/amdgpu: Add driver infrastructure for MCA RAS drm/amd/display: Add Logging for HDMI color depth information drm/amd/amdgpu: consolidate PSP TA init shared buf functions drm/amd/amdgpu: add name field back to ras_common_if drm/amdgpu: Fix build with missing pm_suspend_target_state module export ...
2021-09-01Merge tag 'staging-5.15-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO and staging driver updates from Greg KH: "Here is the big set of staging and IIO driver updates for 5.15-rc1. Also included in here are the counter driver subsystem updates as the IIO drivers needed them. Lots of churn in some staging drivers, we dropped the "old" rtl8188eu driver and replaced it with a newer version of the driver that had been maintained out-of-tree by Larry with the end goal of actually being able to get this driver out of staging eventually. Despite that driver being "newer" the line count of this pull request is going up. Some drivers moved out of staging as well, which is always nice to see, that is why there are additions to the mfc and misc driver subsystems. All of these were acked by the various subsystem maintainers involved. But by far, as normal, it's coding style cleanups all over the drivers/staging/ tree in here. Full details of these changes are in the shortlog. All of these have been in linux-next for a while with no reported problems" [ Note: the r8188eu merge clashed with commit 89939e890605 ("staging: rtlwifi: use siocdevprivate") from the networking tree. When resolving the issue, I noted that the whole r8188eu rtw_android code is dead since commit ae7471cae00a ("staging: r8188eu: remove rtw_ioctl function"). End result: the merge resolution was to throw all of that away, rather than do the mindless fixup to code that isn't actually reachable - Linus ] * tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits) staging: vt6655: Remove filenames in files staging: r8188eu: add extra TODO entries staging: vt6656: Remove filenames in files staging: wlan-ng: fix invalid assignment warning staging: r8188eu: rename fields of struct rtl_ps staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS() staging: r8188eu: rename fields of struct dyn_primary_cca staging: r8188eu: rename struct field Wifi_Error_Status staging: r8188eu: Provide a TODO file for this driver staging: r8188eu: remove unneeded variable staging: r8188eu: remove unneeded conversions to bool staging: r8188eu: remove {read,write}_macreg staging: r8188eu: core: remove condition with no effect staging: r8188eu: remove ethernet.h header file staging: r8188eu: remove ip.h header file staging: r8188eu: remove if_ether.h header file staging: r8188eu: make rtw_deinit_intf_priv return void staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c ...
2021-09-01Merge tag 'char-misc-5.15-rc1' of ↵Linus Torvalds1-0/+185
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char/misc driver changes for 5.15-rc1. Lots of different driver subsystems are being updated in here, notably: - mhi subsystem update - fpga subsystem update - coresight/hwtracing subsystem update - interconnect subsystem update - nvmem subsystem update - parport drivers update - phy subsystem update - soundwire subsystem update and there are some other char/misc drivers being updated as well: - binder driver additions - new misc drivers - lkdtm driver updates - mei driver updates - sram driver updates - other minor driver updates. Note, there are no habanalabs driver updates in this pull request, that will probably come later before -rc1 is out in a different request. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) Revert "bus: mhi: Add inbound buffers allocation flag" misc/pvpanic: fix set driver data VMCI: fix NULL pointer dereference when unmapping queue pair char: mware: fix returnvar.cocci warnings parport: remove non-zero check on count soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down phy: qcom-qmp: Add support for SM6115 UFS phy dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings phy: qmp: Provide unique clock names for DP clocks lkdtm: remove IDE_CORE_CP crashpoint lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ coresight: Replace deprecated CPU-hotplug functions. Documentation: coresight: Add documentation for CoreSight config coresight: syscfg: Add initial configfs support coresight: config: Add preloaded configurations coresight: etm4x: Add complex configuration handlers to etmv4 coresight: etm-perf: Update to activate selected configuration ...
2021-09-01dt-bindings: gce: add gce header file for mt8195jason-jh.lin1-0/+812
Add gce header file to define the gce subsys id, hardware event id and constant for mt8195. Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-08-31Merge tag 'timers-core-2021-08-30' of ↵Linus Torvalds1-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Updates for timekeeping, timers and related drivers: Core code: - Cure a couple of correctness issues in the posix CPU timer code to prevent that the tick dependency for NOHZ full is kept alive for no reason. - Avoid expensive double reprogramming of the clockevent device in hrtimer_start_range_ns(). - Avoid pointless SMP function calls when the clock was set to avoid disturbing CPUs which do not have any affected timers queued. - Make the clocksource watchdog test work correctly when CONFIG_HZ is less than 100. Drivers: - Prefer the ARM architected timer over the Exynos timer which is way more expensive to access. - Add device tree bindings for new Ingenic SoCs - The usual improvements and cleanups all over the place" * tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) clocksource: Make clocksource watchdog test safe for slow-HZ systems dt-bindings: timer: Add ABIs for new Ingenic SoCs clocksource/drivers/fttmr010: Pass around less pointers clocksource/drivers/mediatek: Optimize systimer irq clear flow on shutdown clocksource/drivers/ingenic: Use bitfield macro helpers clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel dt-bindings: timer: convert rockchip,rk-timer.txt to YAML clocksource/drivers/exynos_mct: Mark MCT device as CLOCK_EVT_FEAT_PERCPU clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64 hrtimer: Unbreak hrtimer_force_reprogram() hrtimer: Use raw_cpu_ptr() in clock_was_set() hrtimer: Avoid more SMP function calls in clock_was_set() hrtimer: Avoid unnecessary SMP function calls in clock_was_set() hrtimer: Add bases argument to clock_was_set() time/timekeeping: Avoid invoking clock_was_set() twice timekeeping: Distangle resume and clock-was-set events timerfd: Provide timerfd_resume() hrtimer: Force clock_was_set() handling for the HIGHRES=n, NOHZ=y case hrtimer: Ensure timerfd notification for HIGHRES=n hrtimer: Consolidate reprogramming code ...
2021-08-30Merge tag 'for-v5.15' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Battery/charger related: - cros-peripheral-charger: new driver - mt6360-charger: new driver - simple-battery: support reading chemistry info - max17042-battery: add max77849 support - sbs-battery: add time_to_empty_now support - smb347-charger: prepare USB OTG support - rn5t618: add voltage_now support - axp288: cleanup & optimizations - max17042_battery: cleanups - ab8500: cleanups - misc minor cleanups and DT binding fixes reset related: - tps65086-restart: new driver - linkstation-poweroff: support NETGEAR ReadyNAS Duo v2" * tag 'for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits) power: supply: core: Fix parsing of battery chemistry/technology power: supply: max17042_battery: log SOC threshold using debug log level power: supply: max17042_battery: more robust chip type checks power: supply: max17042_battery: fix typo in MAx17042_TOFF power: supply: max17042_battery: clean up MAX17055_V_empty power: supply: smb347-charger: Implement USB VBUS regulator power: supply: smb347-charger: Add missing pin control activation power: supply: smb347-charger: Utilize generic regmap caching power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator power: reset: Add TPS65086 restart driver dt-bindings: power: supply: max17042: describe interrupt power: supply: max17042: remove duplicated STATUS bit defines power: supply: max17042: handle fails of reading status register power: supply: core: Parse battery chemistry/technology dt-bindings: power: Extend battery bindings with chemistry power: reset: linkstation-poweroff: add new device power: reset: linkstation-poweroff: prepare for new devices power: supply: bq24735: reorganize ChargeOption command macros power: supply: rn5t618: Add voltage_now property ...
2021-08-30dt-binding: gce: add gce header file for mt8192Yongqiang Niu1-0/+335
Add documentation for the mt8192 gce. Add gce header file defined the gce hardware event, subsys number and constant for mt8192. Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-08-29dt-bindings: clock: Add SM6350 GCC clock bindingsKonrad Dybcio1-0/+178
Add device tree bindings for global clock controller on SM6350 SoC. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210820203624.232268-2-konrad.dybcio@somainline.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-29clk: qcom: rpmh: Add support for RPMH clocks on SM6350Konrad Dybcio1-0/+2
Add support for RPMH clocks on SM6350 SoCs. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210820203243.230157-3-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-29dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCCIskren Chernev1-0/+201
Add device tree bindings for global clock controller on SM6115 and SM4250 SoCs (pin and software compatible). Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210805161107.1194521-2-iskren.chernev@gmail.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-26clk: qcom: Add msm8994 MMCC driverKonrad Dybcio1-0/+155
Add a driver for managing MultiMedia SubSystem clocks on msm8994 and its derivatives. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210618111435.595689-2-konrad.dybcio@somainline.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-26dt-bindings: clock: add Qualcomm MSM8953 GCC driver bindingsVladimir Lypak1-0/+234
Add bindings and compatible to document MSM8953 GCC (Global Clock Controller) driver. Signed-off-by: Vladimir Lypak <junak.pub@gmail.com> Signed-off-by: Adam Skladowski <a_skl39@protonmail.com> Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com> Link: https://lore.kernel.org/r/Q6uB3NRxqtD8Prsmliv8ZdsTXGeviv7lb2jQ743jr1E@cp4-web-036.plabs.ch Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-26Merge tag 'reset-for-v5.15' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann1-0/+2
arm/drivers Reset controller updates for v5.15 Add support for the SC7280 PDC Global and RZ/G2L USB/PHY reset controllers, convert UniPhier glue device tree bindings to json-schema and remove a leftover mention of ZTE zx2967 from Kconfig. * tag 'reset-for-v5.15' of git://git.pengutronix.de/pza/linux: reset: simple: remove ZTE details in Kconfig help reset: renesas: Add RZ/G2L usbphy control driver dt-bindings: reset: Document RZ/G2L USBPHY Control bindings dt-bindings: reset: Convert UniPhier glue reset to json-schema reset: qcom: Add PDC Global reset signals for WPSS dt-bindings: reset: pdc: Add PDC Global bindings dt-bindings: reset: aoss: Add AOSS reset controller binding Link: https://lore.kernel.org/r/d42a75fc17ce718ef1b3fa4c5d3f5c7fb0bd2bc2.camel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-24Merge tag 'icc-5.15-rc1' of ↵Greg Kroah-Hartman1-0/+185
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.15 Here are changes for the 5.15-rc1 merge window consisting of interconnect core and driver updates. Framework change: - Add sanity check to detect if node is already added to provider. Driver changes: - RPMh drivers probe function consolidation - Add driver for SC8180x platforms - Add support for SC8180x OSM L3 - Use driver-specific naming in OSM L3 Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: osm-l3: Use driver-specific naming interconnect: qcom: osm-l3: Add sc8180x support dt-bindings: interconnect: Add SC8180x to OSM L3 DT binding interconnect: qcom: Add SC8180x providers dt-bindings: interconnect: Add Qualcomm SC8180x DT bindings interconnect: Sanity check that node isn't already on list interconnect: qcom: icc-rpmh: Consolidate probe functions
2021-08-24clk: imx8mn: Add M7 core clockMarek Vasut1-1/+3
Add missing M7 core clock entry to the iMX8MN clock driver. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/20210819202036.2084782-1-marex@denx.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-08-23dt-bindings: soc: remove obsolete zte zx headerZenghui Yu1-24/+0
The zte zx platform had been removed in commit 89d4f98ae90d ("ARM: remove zte zx platform"), so this header is no longer needed. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20210821030924.192-2-yuzenghui@huawei.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-23dt-bindings: clock: remove obsolete zte zx headerZenghui Yu1-164/+0
The zx296718-clkc driver had been removed in commit bcbe6005eb18 ("clk: remove zte zx driver"), so this header is no longer needed. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20210821030924.192-1-yuzenghui@huawei.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-08-22dt-bindings: reset: mt8195: add toprgu reset-controller header fileChristine Zhu1-0/+29
Add toprgu reset-controller header file for MT8195 platform. Signed-off-by: Christine Zhu <Christine.Zhu@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210726122901.12195-3-Christine.Zhu@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-08-21dt-bindings: timer: Add ABIs for new Ingenic SoCs周琰杰 (Zhou Yanjie)1-0/+19
1.Add OST_CLK_EVENT_TIMER for new XBurst®1 SoCs. 2.Add OST_CLK_EVENT_TIMER0 to OST_CLK_EVENT_TIMER15 for new XBurst®2 SoCs. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1626370605-120775-1-git-send-email-zhouyanjie@wanyeetech.com
2021-08-18Merge tag 'qcom-drivers-for-5.15' of ↵Arnd Bergmann1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.15 This fixes the "shared memory state machine" (SMSM) interrupt logic to avoid missing transitions happening while the interrupts are masked. SM6115 support is added to smd-rpm and rpmpd. The Qualcomm SCM firmware driver is once again made possible to compile and load as a kernel module. An out-of-bounds error related to the cooling devices of the AOSS driver is corrected. The binding is converted to YAML and a generic compatible is introduced to reduce the driver churn. The GENI wrapper gains a helper function used in I2C and SPI for switching the serial engine hardware to use the wrapper's DMA-engine. Lastly it contains a number of cleanups and smaller fixes for rpmhpd, socinfo, CPR, mdt_loader and the GENI DT binding. * tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: smsm: Fix missed interrupts if state changes while masked soc: qcom: smsm: Implement support for get_irqchip_state soc: qcom: mdt_loader: be more informative on errors dt-bindings: qcom: geni-se: document iommus soc: qcom: smd-rpm: Add SM6115 compatible soc: qcom: geni: Add support for gpi dma soc: qcom: geni: move GENI_IF_DISABLE_RO to common header PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32() drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible soc: qcom: aoss: Fix the out of bound usage of cooling_devs firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module soc: qcom: socinfo: Don't print anything if nothing found soc: qcom: rpmhpd: Use corner in power_off soc: qcom: aoss: Add generic compatible dt-bindings: soc: qcom: aoss: Convert to YAML dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible firmware: qcom_scm: remove a duplicative condition firmware: qcom_scm: Mark string array const Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16dt-bindings: power: supply: smb347-charger: Document USB VBUS regulatorDmitry Osipenko1-0/+4
SMB347 can supply power to USB VBUS, which is required by OTG-cable devices that want to switch USB port into the host mode. Add USB VBUS regulator properties. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-15Merge tag 'iio-for-5.15a' of ↵Greg Kroah-Hartman1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new IIO and counter device support, cleanups and features for 5.15 Usual mix of cleanups and new device support. Counter ====== Cleanups and refactoring: * treewide - Ensure attempts to set invalid modes result in -EINVAL return. - Rename counter_count_function to counter_function as the middle count is redundant. - Standardize error returns when limits are exceeded. * 104-quad: - Document the lock. - Return an error if attempt to set the ceiling value in a mode that doesn't support it. * intel-qep - Drop unused bitops.h include IIO === New device support * bma255 - Add support fo the bosch,bmc156_accel which oddly only exposes the INT2 interrupt pin and not INT1. Patch set includes enabling use of INT2. * ingenic_adc - Add support for JZ4760 and similar and update bindings - Add support for JZ4760B and update bindings * rockchip_saradc - Add support for rk3568 ADC (separate channel array as more channels) * sgp40 gas sensor used to measure air quality - New driver including binding and ABI documentation. Bindings -------- * Add missing bindings for many DACs where the binding was effectively implicit due to fallback probe methods in I2C and SPI. adi,ad5064 adi,ad5360 adi,ad5380 adi,ad5421 adi,ad5449 adi,ad5504 adi,ad5624r adi,ad5686 / adi,ad5696 adi,ad5761 adi,ad5764 adi,ad5791 adi,ad8801 capella,cm3323 (also add explicit of_device_id table) microchip,mcp4922 * bosch,bma255 - Interrupt type in example was opposite of what the device expects. It's possible that a particular board had an inverter, but we definitely don't want the example to suggest this would be normal. - Add interrupt-names to allow for cases where only INT2 is connected. - Sort compatibles - Merge in very similar bosch,bma180 binding. New feature ----------- * Devices only allowed to provide either extended_name or a label for given channel. If extend_name is used (generally discouraged but can't be removed as it would be a userspaece ABI change), then the label sysfs attribute will provide the extended_name. This allows some userspace parser simplications and hardening. * hid-sensors-pres - Add a timestamp channel (either from hardware, or locally filled). * vcnl3020 - Add periodic sensor mode used to provide IIO events. Cleanups / minor fixes ---------------------- * core/buffers - Avoid unnecessary zeroing of bitmaps that are immediately overwritten. - Move a sanity check earlier to simplify error path. * Quite a few cases of refactors to use devm_* for all of probe and drop remove - adjd_s311 - adxl345 - bma220 - da280 - dmard10 - ds311 - max5481 - max5821 - rfd77402 - tcs3414 - tmp006 * ad5624r - Fix incorrect handling of a regulator that was preventing use of internal regulators. * adjd_s311 - Allocate a buffer as part of iio_priv() structure as maximum size is small enough, no significant advantage in making it flexible sized. * bma220 - Make handling of suspend and resume closer to the probe() wrt to the rather odd interface, that suspend mode is entered by reading a register. * ep93xx - Prepare clock before using (part of conversion to CCF) * fsl-imx25-gcq - Use local device pointer. - Adjust handling of platform_get_irq() to not check for 0 as an error. The function is documented as never returning it. * hid-sensors - Use devm_kmemdup() consistently across all drivers to simplify channel structure allocation management. * meson-saradc - Drop BL30 integration on G12A and newer SoCs as not used. - Whitespace fixes. * mpu6050 - Add per device type startup times. This avoids an issue with having to dsicard initial data from gyroscopes when they were still stabilizing. * rfd77402 - Change from passing private data, to passing i2c_client where only that is needed, reducing back and forth in pm functions. * si1145 - Drop pointless continue * st-sensors - Cleanup of includes to remove unused and add missing headers that are used. - Use some devm functions to simplify probe() and remove() - gets us part way towards a fully device managed driver. * sx9310 - Switch from of to generic properties to enable ACPI bindings. * vcnl3020 - Add DMA safe buffer for bulk transfers. - Drop use of iio_claim_direct() in a driver that has no mode changes. A local lock is more appropriate. * tag 'iio-for-5.15a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (77 commits) counter: 104-quad-8: Describe member 'lock' in 'quad8' iio: hid-sensor-press: Add timestamp channel counter: Rename counter_count_function to counter_function counter: Rename counter_signal_value to counter_signal_level counter: Standardize to ERANGE for limit exceeded errors counter: Return error code on invalid modes counter: 104-quad-8: Return error when invalid mode during ceiling_write iio: accel: bmc150: Add support for BMC156 iio: accel: bmc150: Make it possible to configure INT2 instead of INT1 dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel dt-bindings: iio: accel: bma255: Add interrupt-names iio: light: cm3323: Add of_device_id table dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor iio: chemical: Add driver support for sgp40 dt-bindings: iio: chemical: Add trivial DT binding for sgp40 iio: ep93xx: Prepare clock before using it iio: adc: fsl-imx25-gcq: adjust irq check to match docs and simplify code iio: dac: max5821: convert device register to device managed function dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation iio/adc: ingenic: add JZ4760B support to the sadc driver ...
2021-08-14Merge tag 'renesas-pinctrl-for-v5.15-tag2' of ↵Linus Walleij1-0/+23
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.15 (take two) - Add pin control and GPIO support for the new RZ/G2L SoC.
2021-08-11Merge branch 'ib-mt8135' into develLinus Walleij2-0/+2414
2021-08-11arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrlHsin-Yi Wang1-0/+1120
Move mt8183-pinfunc.h into include/dt-bindings/pinctrl so that we can include it in yaml examples. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210804044033.3047296-2-hsinyi@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrlHsin-Yi Wang1-0/+1294
Move mt8135-pinfunc.h into include/dt-bindings/pinctrl so that we can include it in yaml examples. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210804044033.3047296-1-hsinyi@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10dt-bindings: pinctrl: renesas: Add DT bindings for RZ/G2L pinctrlLad Prabhakar1-0/+23
Add device tree binding documentation and header file for Renesas RZ/G2L pinctrl. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210727112328.18809-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-08-09dt-bindings: interconnect: Add Qualcomm SC8180x DT bindingsGeorgi Djakov1-0/+185
Add compatibles and port definitions for the SC8180x RPMH interconnect providers. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> [bjorn: Split defines from driver patch and added binding update] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210723194243.3675795-1-bjorn.andersson@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-08-07dt-bindings: msm: dsi: document phy-type property for 7nm dsi phyJonathan Marek1-0/+2
Document a new phy-type property which will be used to determine whether the phy should operate in D-PHY or C-PHY mode. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210617144349.28448-3-jonathan@marek.ca Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-31dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entryChristophe Branchereau1-0/+1
The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including the one named AUX in the sadc driver. Leaving the rest untouched as it's ABI. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210726082033.351533-3-cbranchereau@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-30dt-bindings: pinctrl-zynq: Replace 'io-standard' with 'power-source'Sai Krishna Potthuri1-0/+17
Replace custom pin configuration option 'io-standard' with generic property 'power-source' for Zynq pinctrl also add dt-binding file contains pin configuration defines for Zynq pinctrl. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/1626868353-96475-3-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-28dt-bindings: clock: qcom: rpmcc: Document SM6115 compatibleIskren Chernev1-0/+10
Add the dt-binding for the RPM Clock Controller on the SM4250/6115 SoCs. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210627185927.695411-3-iskren.chernev@gmail.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-07-27clk: mediatek: Add dt-bindings of MT8192 clocksChun-Jie Chen1-0/+585
Add MT8192 clock dt-bindings, include topckgen, apmixedsys, infracfg, pericfg and subsystem clocks. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210726105719.15793-5-chun-jie.chen@mediatek.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-07-26dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clockLad Prabhakar1-0/+1
Add P0_DIV2 core clock required for CANFD module. CANFD core clock is sourced from P0_DIV2 referenced from HW manual Rev.0.50. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210719143811.2135-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-07-21dt-bindings: reset: pdc: Add PDC Global bindingsSibi Sankar1-0/+2
Add PDC Global reset controller bindings for SC7280 SoCs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/1619693465-5724-4-git-send-email-sibis@codeaurora.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-07-20dt-bindings: clock: Add SC7280 VideoCC clock bindingTaniya Das1-0/+27
Add device tree bindings for video clock subsystem clock controller for Qualcomm Technology Inc's SC7280 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1626189143-12957-7-git-send-email-tdas@codeaurora.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 15:13:25 +0300