summaryrefslogtreecommitdiff
path: root/include/asm-powerpc/pci-bridge.h
AgeCommit message (Collapse)AuthorFilesLines
2008-08-04powerpc: Move include files to arch/powerpc/include/asmStephen Rothwell1-302/+0
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-18powerpc/4xx: Workaround for PPC440EPx/GRx PCI_28 ErrataJosh Boyer1-0/+3
The 440EPx/GRx chips don't support PCI MRM commands. Drivers determine this by looking for a zero value in the PCI cache line size register. However, some drivers write to this register upon initialization. This can cause MRMs to be used on these chips, which may cause deadlocks on PLB4. The workaround implemented here introduces a new indirect_type flag, called PPC_INDIRECT_TYPE_BROKEN_MRM. This is set in the pci_controller structure in the pci fixup function for 4xx PCI bridges by determining if the bridge is compatible with 440EPx/GRx. The flag is checked in the indirect_write_config function, and forces any writes to the PCI_CACHE_LINE_SIZE register to be zero, which will disable MRMs for these chips. A similar workaround has been tested by AMCC on various PCI cards, such as the Silicon Image ATA card and Intel E1000 GIGE card. Hangs were seen with the Silicon Image card, and MRMs were seen on the bus with a PCI analyzer. With the workaround in place, the card functioned properly and only Memory Reads were seen on the bus with the analyzer. Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-18[POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument constTrent Piepho1-2/+2
A) It's not modified and so it can be made const. const is good. B) If one has a function that was given a const pci_bus pointer and you want to get a pointer to its pci_controller, you'll get a warning from gcc when you use pci_bus_to_host(). This is the right way to stop that warning. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24[POWERPC] Remove update_bridge_resourceKumar Gala1-3/+0
The 85xx/86xx pci code no longer uses update_bridge_resource and it was the only caller. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17[POWERPC] iSeries: eliminate pci_dn bussubnoStephen Rothwell1-1/+0
xlate_iomm_address() really wants the ds_addr to pass to the HV, so store that value (instead of the BAR number) when we allocate the device bars. This is not a fast path, so we can look up the device_node property there instead of using the bussubno field of the pci_dn. The other user of iseries_ds_addr() was already scanning the device tree, so looking up a property will not slow it down any more. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] The pci_dn pcidev is only used by EEHStephen Rothwell1-1/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] The pci_dn class_code is only used by EEHStephen Rothwell1-1/+1
... so move it into the #ifdef CONFIG_EEH section. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21[POWERPC] Pointers marked as __iomem do not need to be volatileStephen Rothwell1-2/+2
Fixes this warning: arch/powerpc/platforms/powermac/pci.c: In function 'u3_ht_cfg_access': arch/powerpc/platforms/powermac/pci.c:354: warning: return discards qualifiers from pointer target type arch/powerpc/platforms/powermac/pci.c:358: warning: return discards qualifiers from pointer target type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] Merge PCI resource fixupsBenjamin Herrenschmidt1-1/+1
The PCI code in 32 and 64 bits fixes up resources differently. 32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus() while 64 bits does things in various places depending on whether you are using OF probing, using PCI hotplug, etc... This merges those by basically using the 32 bits approach for both, with various tweaks to make 64 bits work with the new approach. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] pci32: Add platform option to enable /proc PCI domainsBenjamin Herrenschmidt1-0/+5
This adds flags the platforms can use to enable domain numbers in /proc/bus/pci. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20[POWERPC] pci32: Add flags modifying the PCI code behaviourBenjamin Herrenschmidt1-0/+20
This adds to the 32 bits PCI code some flags, replacing the old pci_assign_all_busses global, that allow us to control various aspects of the PCI probing, such as whether to re-assign all resources or not, or to not try to assign anything at all. This also adds the flag x86 already has to avoid ISA alignment on bridges that don't have ISA forwarding enabled (no legacy devices on the top level bus) and sets it for PowerMacs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Merge pci_process_bridge_OF_ranges()Benjamin Herrenschmidt1-0/+3
This merges the 32-bit and 64-bit implementations of pci_process_bridge_OF_ranges(). The new function is cleaner than both the old ones, and supports 64 bits ranges on ppc32 which is necessary for the 4xx port. It also adds some better (hopefully) output to the kernel log which should help diagnose problems and makes better use of existing OF parsing helpers (avoiding a few bugs of both implementations along the way). There are still a few unfortunate ifdef's but there is no way around these for now at least not until some other bits of the PCI code are made common. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] pci_controller->arch_data really is a struct device_node *Stephen Rothwell1-2/+3
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Consolidate pci_controllerStephen Rothwell1-43/+22
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Clean up pci-bridge.hStephen Rothwell1-53/+42
No semantic changes. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-19[POWERPC] Fix declaration of pcibios_free_controllerBenjamin Herrenschmidt1-2/+3
pcibios_free_controller() is now available for both 32 and 64 bits but the header only declares it for 64 bits. This moves the declaration down next to the pcibios_alloc_controller() one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pciValentine Barshak1-1/+2
Add 64-bit physical address support to setup_indirect_pci(). Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Add function to check if address is an IO portBenjamin Herrenschmidt1-0/+20
This adds a function that tells you if a given kernel virtual address is hitting a PCI or ISA IO port permanent mapping or not. This is to be used in the next patch to fix iomap APIs to properly unmap things. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-24[POWERPC] Provide ability to setup P2P bridge registers from struct resourceKumar Gala1-0/+2
We need the ability to set P2P bridge registers to properly setup the virtual P2P bridges that exist in PCIe controllers for some of the embedded setups. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] Make endianess of cfg_addr for indirect pci ops runtimeKumar Gala1-1/+3
Make it so we do a runtime check to know if we need to write cfg_addr as big or little endian. This is needed if we want to allow 86xx support to co-exist in the same kernel as other 6xx PPCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Removed setup_indirect_pci_nomapKumar Gala1-2/+0
We don't use setup_indirect_pci_nomap in arch/powerpc and it appears the users that needed it from arch/ppc are now using setup_indirect_pci. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no linkKumar Gala1-0/+5
Added PPC_INDIRECT_TYPE_NO_PCIE_LINK flag to the indirect pci handling code to ensure that we don't talk to any device other than the PHB if we don't have PCIe link. Some controllers will lockup if they try to do a config cycle to any device on the bus except the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add the ability to find PCI capabilities early onKumar Gala1-0/+3
Added early_find_capability that wraps pci_bus_find_capability and uses fake_pci_bus() to allow us to call it before we've fully setup the pci_controller. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Use ppc64 style list management for pci_controller on ppc32Kumar Gala1-5/+6
Use the ppc64 style list management and allocation functions for pci_controllers. This makes the pci_controller structs just a bit more common between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Move pci_bus_to_hose users to pci_bus_to_hostKumar Gala1-3/+0
In the places we can move to using pci_bus_to_host, this allows us to make pci_bus_to_host static and remove its export. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Merge ppc32 and ppc64 pcibios_alloc_controller() prototypesKumar Gala1-5/+3
Make the ppc32 pcibios_alloc_controller take a device node to match the ppc64 prototypes and have it set arch_data. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Use global_number in ppc32 pci_controllerKumar Gala1-1/+1
Make the pci_controller struct use global_number for the PHB domain number instead of index to match what ppc64 does and reuse its pci_domain_nr code. Introduced a pci-common.c to handle shared code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Removed dead code related to PCI on ppc32Kumar Gala1-12/+0
There are no in kernel users of any off these functions and some of them were not even EXPORT_SYMBOL: - pci_bus_io_base() - pci_bus_io_base_phys() - pci_bus_mem_base_phys() - pci_resource_to_bus() - phys_to_bus() - pci_phys_to_bus() - pci_bus_to_phys() - pci_init_resource() - resource_fixup() Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Remove local_number from pci_controllerKumar Gala1-1/+0
We never actually read local_number so lets just remove it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] Merge asm-ppc/pci-bridge.h into asm-power/pci-bridge.hKumar Gala1-18/+120
Moved bits need for ppc32 from asm-ppc/pci-bridge.h into asm-powerpc/pci-bridge.h. Removed ARCH=powerpc specific bits (and comments related to ARCH=ppc) from asm-ppc/pci-bridge.h as its only used on ARCH=ppc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-14[POWERPC] Rewrite IO allocation & mapping on powerpc64Benjamin Herrenschmidt1-0/+6
This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] Show EEH per-device false positivesLinas Vepstas1-0/+1
Track and report the number of times we read an all-1s value (0xff, 0xffff or 0xffffffff) from each device which is valid data, not indicating EEH isolation. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 5 +++++ arch/powerpc/platforms/pseries/eeh_sysfs.c | 3 +++ include/asm-powerpc/pci-bridge.h | 1 + 3 files changed, 9 insertions(+) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14[POWERPC] pseries: asm/pci-bridge.h CONFIG_ minor cleanupLinas Vepstas1-7/+9
Use the correct CONFIG_ option to mark off the EEH bits. Move the EEH bits to the bottom of the struct. The config_space array is used by EEH only; it does not need to be part of the struct for non-pseries machines. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- Revised patch, per commments from Michael Ellerman. include/asm-powerpc/pci-bridge.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24[POWERPC] Add a field for each specific bus to struct pci_controllerIshizaki Kou1-0/+2
Struct pci_controller doesn't prepare for the dependent data of each specific bus. This patch adds private member to struct pci_controller. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Fix mmap of PCI resource with hack for XBenjamin Herrenschmidt1-2/+2
The powerpc version of pci_resource_to_user() and associated hooks used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some time on machines that don't have a 1:1 mapping of devices (basically on non-PowerMacs) and have PCI devices above 32 bits. This attempts to fix it as well as possible. The rule is supposed to be that pci_resource_to_user() always converts the resources back into a BAR values since that's what the /proc interface was supposed to deal with. However, for X to work on platforms where PCI MMIO is not mapped 1:1, it became a habit of platforms like powerpc to pass "fixed up" values there since X expects to be able to use values from /proc/bus/pci/devices as offsets to mmap of /dev/mem... So we keep that contraption here, causing also /sys/*/resource to expose fully absolute MMIO addresses instead of BAR values, which is ugly, but should still work as long as those are only used to calculate alignment within a page. X is still broken when built 32 bits on machines where PCI MMIO can be above 32-bit space unfortunately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add "parent" struct device for PCI host bridgesBenjamin Herrenschmidt1-0/+1
Add a "parent" struct device to our PCI host bridge data structure so that PCI can be rooted off another device in sysfs. Note that arch/ppc doesn't use it, only arch/powerpc, though it's available for both 32 and 64 bits. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones1-1/+0
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-06-15[POWERPC] pcibus_to_node fixesAnton Blanchard1-0/+8
of_node_to_nid returns -1 if the associativity cannot be found. This means pcibus_to_cpumask has to be careful not to pass a negative index into node_to_cpumask. Since pcibus_to_node could be used a lot, and of_node_to_nid is slow (it walks a list doing strcmps), lets also cache the node in the pci_controller struct. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24[PATCH] powerpc: remove LogicalSlot from pci_dnStephen Rothwell1-4/+0
As we now store enough information in the device_node. Also the Flags field was not used either, do remove that. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24[PATCH] powerpc: remove Irq from pci_dnStephen Rothwell1-1/+0
As we now store enough information in the device_node to allocate the irq number in pcibios_final_fixup. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24[PATCH] powerpc: remove iSeries_Global_Device_ListStephen Rothwell1-1/+0
We can now scan the list of device nodes instead. This also allows us to remove the Device_list member of struct pci_dn. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: small pci cleanupsStephen Rothwell1-2/+0
pcibios_claim_one_bus is not needed on iSeries and phbs_remap_io can be mode static. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10[PATCH] powerpc: Save device BARs much earlier in the boot sequenceLinas Vepstas1-4/+4
241-eeh-save-bars-earlier.patch Save the PCI device bars *before* any PCI probing is done. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 76c902b919098860f3d4e125f847abcc4cb1782a commit)
2006-01-10[PATCH] powerpc: Add "partitionable endpoint" supportLinas Vepstas1-0/+1
26-eeh-partition-endpoint.patch New versions of firmware introduce a new method by which the "partitionable endpoint" (the point at which the pci bus is cut) should be located. This code adds the support for this (mandatory) new feature. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 9fcfb5d35b5294659f9299aa9cae6fd16325c07e commit)
2006-01-09[PATCH] powerpc: sanitize header files for user space includesArnd Bergmann1-0/+2
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: pci_address_to_pio fixBenjamin Herrenschmidt1-3/+3
This fixes pci_address_to_pio() to return an unsigned long (to be safe) and fixes a bug in the implementation that caused it to return a bogus IO port number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: export PCI fixup routinelinas1-0/+1
There is code in the RPAPHP directory that is identical to this routine; I'll be removing that code in an upcoming patch, but this patch is needed to expose the function to make it callable. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Update OF address parsersBenjamin Herrenschmidt1-0/+9
This updates the OF address parsers to return the IO flags indicating the type of address obtained. It also adds a PCI call for converting physical addresses that hit IO space into into IO tokens, and add routines that return the translated addresses into struct resource Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: migrate common PCI hotplug codeLinas Vepstas1-0/+9
23-rpaphp-migrate.patch (parts) This patch moves some pci device add & remove code from the PCI hotplug directory to the arch/powerpc/kernel directory, and cleans it up a tad. The primary reason for this is that the code performs some fairly generic operations that are shared with the PCI error recovery code (living in the arch/powerpc/kernel directory). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: serial port discovery (#2)Benjamin Herrenschmidt1-0/+3
This moves the discovery of legacy serial ports to a separate file, makes it common to ppc32 and ppc64, and reworks it to use the new OF address translators to get to the ports early. This new version can also detect some PCI serial cards using legacy chips and will probably match those discovered port with the default console choice. Only ppc64 gets udbg still yet, unifying udbg isn't finished yet. It also adds some speed-probing code to udbg so that the default console can come up at the same speed it was set to by the firmware. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>