| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 1fcb6fcd74a222d9ead54d405842fc763bb86262 ]
When looking into another nfs xfstests report, I found acl and
default_acl in nfs3_proc_create() and nfs3_proc_mknod() error
paths are possibly leaked. Fix them in advance.
Fixes: 013cdf1088d7 ("nfs: use generic posix ACL infrastructure for v3 Posix ACLs")
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2c2a622d41168f9fea2aa3f76b9fbaa88531aac ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 9ca2d7326444 ("ubifs: Limit number of xattrs per inode")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3731d44bba8e0116b052b1b374476c5f6dd9a456 ]
Fix an Oopsable condition in pnfs_mark_request_commit() when we're
putting a set of writes on the commit list to reschedule them after a
failed pNFS attempt.
Fixes: 9c455a8c1e14 ("NFS/pNFS: Clean up pNFS commit operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd99e9f98fbf423ff6d365b37a98e8879170f17c ]
Set up the connection to the NFSv4 server in nfs4_alloc_client(), before
we've added the struct nfs_client to the net-namespace's nfs_client_list
so that a downed server won't cause other mounts to hang in the trunking
detection code.
Reported-by: Michael Wakabayashi <mwakabayashi@vmware.com>
Fixes: 5c6e5b60aae4 ("NFS: Fix an Oops in the pNFS files and flexfiles connection setup to the DS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a67d9b07ac8dce7f1034e0d887f2f4ee00fe118 ]
This patch restricts to configure compress extension as format of:
[filename + '.' + extension]
rather than:
[filename + '.' + extension + (optional: '.' + temp extension)]
in order to avoid to enable compression incorrectly:
1. compress_extension=so
2. touch file.soa
3. touch file.so.tmp
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0dd571785d61528d62cdd8aa49d76bc6085152fe ]
As marcosfrm reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=213089
Initramfs generators rely on "pre" softdeps (and "depends") to include
additional required modules.
F2FS does not declare "pre: crc32" softdep. Then every generator (dracut,
mkinitcpio...) has to maintain a hardcoded list for this purpose.
Hence let's use MODULE_SOFTDEP("pre: crc32") in f2fs code.
Fixes: 43b6573bac95 ("f2fs: use cryptoapi crc32 functions")
Reported-by: marcosfrm <marcosfrm@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a948b1142cae66785521a389cab2cce74069b547 ]
Since commit 9a6944fee68e ("tracing: Add a verifier to check string
pointers for trace events"), which was merged in v5.13-rc1,
TP_printk() no longer tacitly supports the "%.*s" format specifier.
These are low value tracepoints, so just remove them.
Reported-by: David Wysochanski <dwysocha@redhat.com>
Fixes: dd5e3fbc1f47 ("NFSD: Add tracepoints to the NFSD state management code")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89e53ff1651a61cf2abef9356e2f60d0086215be ]
Default age threshold value is missed to set, fix it.
Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
Reported-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 558d6450c7755aa005d89021204b6cdcae5e848f ]
If a writeback of the superblock fails with an I/O error, the buffer
is marked not uptodate. However, this can cause a WARN_ON to trigger
when we attempt to write superblock a second time. (Which might
succeed this time, for cerrtain types of block devices such as iSCSI
devices over a flaky network.)
Try to detect this case in flush_stashed_error_work(), and also change
__ext4_handle_dirty_metadata() so we always set the uptodate flag, not
just in the nojournal case.
Before this commit, this problem can be repliciated via:
1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096'
2. mount /dev/mapper/dust1 /home/test
3. dmsetup message dust1 0 addbadblock 0 10
4. cd /home/test
5. echo "XXXXXXX" > t
After a few seconds, we got following warning:
[ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0
[ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write
[ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata
[ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0
[ 91.417038] ------------[ cut here ]------------
[ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e
[ 91.440322] Call Trace:
[ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220
[ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90
[ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0
[ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240
[ 91.443336] ? put_prev_entity+0x2a/0x200
[ 91.443856] ? kjournald2+0x12e/0x510
[ 91.444324] kjournald2+0x12e/0x510
[ 91.444773] ? woken_wake_function+0x30/0x30
[ 91.445326] kthread+0x150/0x1b0
[ 91.445739] ? commit_timeout+0x20/0x20
[ 91.446258] ? kthread_flush_worker+0xb0/0xb0
[ 91.446818] ret_from_fork+0x1f/0x30
[ 91.447293] ---[ end trace 66f0b6bf3d1abade ]---
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e97bc66377bca097e1f3349ca18ca17f202ff659 ]
If a file has already been closed, then it should not be selected to
support further I/O.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[Trond: Fix an invalid pointer deref reported by Colin Ian King]
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22d41cdcd3cfd467a4af074165357fcbea1c37f5 ]
The checks for page->mapping are odd, as set_page_dirty is an
address_space operation, and I don't see where it would be called on a
non-pagecache page.
The warning about the page lock also seems bogus. The comment over
set_page_dirty() says that it can be called without the page lock in
some rare cases. I don't think we want to warn if that's the case.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fdec1b3c9fbb5e856a40db5993c9eaf91c74a83 ]
Orangefs df output is whacky. Walt Ligon suggested this might fix it.
It seems way more in line with reality now...
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20cf7d4ea4ad7d9830b01ff7444f6ac64a727a23 ]
If the change attribute update is declared to be non-atomic by the
server, or our cached value does not match the server's value before the
operation was performed, then we should declare the inode cache invalid.
On the other hand, if the change to the directory raced with a lookup or
getattr which already updated the change attribute, then optimise away
the revalidation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 213bb58475b57786e4336bc8bfd5029e16257c49 ]
The inode is considered revalidated when we've checked the value of the
change attribute against our cached value since that suffices to
establish whether or not the other cached values are valid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15db16837a35d8007cb8563358787412213db25e ]
Server responds to LOOKUP and other ops (READDIRPLUS/CREATE/MKNOD/...)
with ourarg containing nodeid and generation.
If a fuse inode is found in inode cache with the same nodeid but different
generation, the existing fuse inode should be unhashed and marked "bad" and
a new inode with the new generation should be hashed instead.
This can happen, for example, with passhrough fuse filesystem that returns
the real filesystem ino/generation on lookup and where real inode numbers
can get recycled due to real files being unlinked not via the fuse
passthrough filesystem.
With current code, this situation will not be detected and an old fuse
dentry that used to point to an older generation real inode, can be used to
access a completely new inode, which should be accessed only via the new
dentry.
Note that because the FORGET message carries the nodeid w/o generation, the
server should wait to get FORGET counts for the nlookup counts of the old
and reused inodes combined, before it can free the resources associated to
that nodeid.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d82ab251ef0f6e7716279b04e9b5a01a86ca530 ]
Even if POSIX doesn't mandate it, linux users legitimately expect sync() to
flush all data and metadata to physical storage when it is located on the
same system. This isn't happening with virtiofs though: sync() inside the
guest returns right away even though data still needs to be flushed from
the host page cache.
This is easily demonstrated by doing the following in the guest:
$ dd if=/dev/zero of=/mnt/foo bs=1M count=5K ; strace -T -e sync sync
5120+0 records in
5120+0 records out
5368709120 bytes (5.4 GB, 5.0 GiB) copied, 5.22224 s, 1.0 GB/s
sync() = 0 <0.024068>
and start the following in the host when the 'dd' command completes
in the guest:
$ strace -T -e fsync /usr/bin/sync virtiofs/foo
fsync(3) = 0 <10.371640>
There are no good reasons not to honor the expected behavior of sync()
actually: it gives an unrealistic impression that virtiofs is super fast
and that data has safely landed on HW, which isn't the case obviously.
Implement a ->sync_fs() superblock operation that sends a new FUSE_SYNCFS
request type for this purpose. Provision a 64-bit placeholder for possible
future extensions. Since the file server cannot handle the wait == 0 case,
we skip it to avoid a gratuitous roundtrip. Note that this is
per-superblock: a FUSE_SYNCFS is send for the root mount and for each
submount.
Like with FUSE_FSYNC and FUSE_FSYNCDIR, lack of support for FUSE_SYNCFS in
the file server is treated as permanent success. This ensures
compatibility with older file servers: the client will get the current
behavior of sync() not being propagated to the file server.
Note that such an operation allows the file server to DoS sync(). Since a
typical FUSE file server is an untrusted piece of software running in
userspace, this is disabled by default. Only enable it with virtiofs for
now since virtiofsd is supposedly trusted by the guest kernel.
Reported-by: Robert Krawitz <rlk@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be20037725d17935ec669044bd2b15bc40c3b5ab ]
If we're unable to immediately recover all locks because the server is
unable to immediately service our reclaim calls, then we want to retry
after we've finished servicing all the other asynchronous delegation
returns on our queue.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 492109333c29e1bb16d8732e1d597b02e8e0bf2e ]
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'rc.
Eliminate the follow smatch warning:
fs/jfs/jfs_logmgr.c:1327 lmLogInit() warn: missing error code 'rc'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ea32af47f00a046a1f953370514d6d946efe0152 upstream.
When syncing the log, if we fail to allocate the root node for the log
root tree:
1) We are unlocking fs_info->tree_log_mutex, but at this point we have
not yet locked this mutex;
2) We have locked fs_info->tree_root->log_mutex, but we end up not
unlocking it;
So fix this by unlocking fs_info->tree_root->log_mutex instead of
fs_info->tree_log_mutex.
Fixes: e75f9fd194090e ("btrfs: zoned: move log tree node allocation out of log_root_tree->log_mutex")
CC: stable@vger.kernel.org # 5.13+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9cc0b837e14ae913581ec1ea6e979a738f71b0fd upstream.
If we can't acquire the reclaim_bgs_lock on block group reclaim, we
block until it is free. This can potentially stall for a long time.
While reclaim of block groups is necessary for a good user experience on
a zoned file system, there still is no need to block as it is best
effort only, just like when we're deleting unused block groups.
CC: stable@vger.kernel.org # 5.13
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79bd37120b149532af5b21953643ed74af69654f upstream.
Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array
due to concurrent allocations") fixed a problem that resulted in
exhausting the system chunk array in the superblock when there are many
tasks allocating chunks in parallel. Basically too many tasks enter the
first phase of chunk allocation without previous tasks having finished
their second phase of allocation, resulting in too many system chunks
being allocated. That was originally observed when running the fallocate
tests of stress-ng on a PowerPC machine, using a node size of 64K.
However that commit also introduced a deadlock where a task in phase 1 of
the chunk allocation waited for another task that had allocated a system
chunk to finish its phase 2, but that other task was waiting on an extent
buffer lock held by the first task, therefore resulting in both tasks not
making any progress. That change was later reverted by a patch with the
subject "btrfs: fix deadlock with concurrent chunk allocations involving
system chunks", since there is no simple and short solution to address it
and the deadlock is relatively easy to trigger on zoned filesystems, while
the system chunk array exhaustion is not so common.
This change reworks the chunk allocation to avoid the system chunk array
exhaustion. It accomplishes that by making the first phase of chunk
allocation do the updates of the device items in the chunk btree and the
insertion of the new chunk item in the chunk btree. This is done while
under the protection of the chunk mutex (fs_info->chunk_mutex), in the
same critical section that checks for available system space, allocates
a new system chunk if needed and reserves system chunk space. This way
we do not have chunk space reserved until the second phase completes.
The same logic is applied to chunk removal as well, since it keeps
reserved system space long after it is done updating the chunk btree.
For direct allocation of system chunks, the previous behaviour remains,
because otherwise we would deadlock on extent buffers of the chunk btree.
Changes to the chunk btree are by large done by chunk allocation and chunk
removal, which first reserve chunk system space and then later do changes
to the chunk btree. The other remaining cases are uncommon and correspond
to adding a device, removing a device and resizing a device. All these
other cases do not pre-reserve system space, they modify the chunk btree
right away, so they don't hold reserved space for a long period like chunk
allocation and chunk removal do.
The diff of this change is huge, but more than half of it is just addition
of comments describing both how things work regarding chunk allocation and
removal, including both the new behavior and the parts of the old behavior
that did not change.
CC: stable@vger.kernel.org # 5.12+
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1cb3db1cf383a3c7dbda1aa0ce748b0958759947 upstream.
When a task attempting to allocate a new chunk verifies that there is not
currently enough free space in the system space_info and there is another
task that allocated a new system chunk but it did not finish yet the
creation of the respective block group, it waits for that other task to
finish creating the block group. This is to avoid exhaustion of the system
chunk array in the superblock, which is limited, when we have a thundering
herd of tasks allocating new chunks. This problem was described and fixed
by commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array
due to concurrent allocations").
However there are two very similar scenarios where this can lead to a
deadlock:
1) Task B allocated a new system chunk and task A is waiting on task B
to finish creation of the respective system block group. However before
task B ends its transaction handle and finishes the creation of the
system block group, it attempts to allocate another chunk (like a data
chunk for an fallocate operation for a very large range). Task B will
be unable to progress and allocate the new chunk, because task A set
space_info->chunk_alloc to 1 and therefore it loops at
btrfs_chunk_alloc() waiting for task A to finish its chunk allocation
and set space_info->chunk_alloc to 0, but task A is waiting on task B
to finish creation of the new system block group, therefore resulting
in a deadlock;
2) Task B allocated a new system chunk and task A is waiting on task B to
finish creation of the respective system block group. By the time that
task B enter the final phase of block group allocation, which happens
at btrfs_create_pending_block_groups(), when it modifies the extent
tree, the device tree or the chunk tree to insert the items for some
new block group, it needs to allocate a new chunk, so it ends up at
btrfs_chunk_alloc() and keeps looping there because task A has set
space_info->chunk_alloc to 1, but task A is waiting for task B to
finish creation of the new system block group and release the reserved
system space, therefore resulting in a deadlock.
In short, the problem is if a task B needs to allocate a new chunk after
it previously allocated a new system chunk and if another task A is
currently waiting for task B to complete the allocation of the new system
chunk.
Unfortunately this deadlock scenario introduced by the previous fix for
the system chunk array exhaustion problem does not have a simple and short
fix, and requires a big change to rework the chunk allocation code so that
chunk btree updates are all made in the first phase of chunk allocation.
And since this deadlock regression is being frequently hit on zoned
filesystems and the system chunk array exhaustion problem is triggered
in more extreme cases (originally observed on PowerPC with a node size
of 64K when running the fallocate tests from stress-ng), revert the
changes from that commit. The next patch in the series, with a subject
of "btrfs: rework chunk allocation to avoid exhaustion of the system
chunk array" does the necessary changes to fix the system chunk array
exhaustion problem.
Reported-by: Naohiro Aota <naohiro.aota@wdc.com>
Link: https://lore.kernel.org/linux-btrfs/20210621015922.ewgbffxuawia7liz@naota-xeon/
Fixes: eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations")
CC: stable@vger.kernel.org # 5.12+
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54afaae34ee49e98c1c902b444b42832551d090c upstream.
The types in calculation of the used percentage in the reclaiming
messages are both u64, though bg->length is either 1GiB (non-zoned) or
the zone size in the zoned mode. The upper limit on zone size is 8GiB so
this could theoretically overflow in the future, right now the values
fit.
Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.13
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit abb99cfdaf0759f8a619e5fecf52ccccdf310c8c upstream.
Damien reported a test failure with btrfs/209. The test itself ran fine,
but the fsck ran afterwards reported a corrupted filesystem.
The filesystem corruption happens because we're splitting an extent and
then writing the extent twice. We have to split the extent though, because
we're creating too large extents for a REQ_OP_ZONE_APPEND operation.
When dumping the extent tree, we can see two EXTENT_ITEMs at the same
start address but different lengths.
$ btrfs inspect dump-tree /dev/nullb1 -t extent
...
item 19 key (269484032 EXTENT_ITEM 126976) itemoff 15470 itemsize 53
refs 1 gen 7 flags DATA
extent data backref root FS_TREE objectid 257 offset 786432 count 1
item 20 key (269484032 EXTENT_ITEM 262144) itemoff 15417 itemsize 53
refs 1 gen 7 flags DATA
extent data backref root FS_TREE objectid 257 offset 786432 count 1
The duplicated EXTENT_ITEMs originally come from wrongly split extent_map in
extract_ordered_extent(). Since extract_ordered_extent() uses
create_io_em() to split an existing extent_map, we will have
split->orig_start != split->start. Then, it will be logged with non-zero
"extent data offset". Finally, the logged entries are replayed into
a duplicated EXTENT_ITEM.
Introduce and use proper splitting function for extent_map. The function is
intended to be simple and specific usage for extract_ordered_extent() e.g.
not supporting compression case (we do not allow splitting compressed
extent_map anyway).
There was a question raised by Qu, in summary why we want to split the
extent map (and not the bio):
The problem is not the limit on the zone end, which as you mention is
the same as the block group end. The problem is that data write use zone
append (ZA) operations. ZA BIOs cannot be split so a large extent may
need to be processed with multiple ZA BIOs, While that is also true for
regular writes, the major difference is that ZA are "nameless" write
operation giving back the written sectors on completion. And ZA
operations may be reordered by the block layer (not intentionally
though). Combine both of these characteristics and you can see that the
data for a large extent may end up being shuffled when written resulting
in data corruption and the impossibility to map the extent to some start
sector.
To avoid this problem, zoned btrfs uses the principle "one data extent
== one ZA BIO". So large extents need to be split. This is unfortunate,
but we can revisit this later and optimize, e.g. merge back together the
fragments of an extent once written if they actually were written
sequentially in the zone.
Reported-by: Damien Le Moal <damien.lemoal@wdc.com>
Fixes: d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
CC: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c6882608bce249a8918744ecdb65748534e3f17 upstream.
When we use delayed_work for fallback execution of requests, current
will be not of the submitter task, and so checks in io_req_task_submit()
may not behave as expected. Currently, it leaves inline completions not
flushed, so making io_ring_exit_work() to hang. Use the submitter task
for all those checks.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cb413c715bed0bc9c98b169059ea9c8a2c770715.1625881431.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mounts
commit 50630b3f1ada0bf412d3f28e73bac310448d9d6f upstream.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213565
cruid should only be used for the initial mount and after this we should use the current
users credentials.
Ignore the original cruid mount argument when creating a new context for a multiuser mount
following a DFS link.
Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api")
Cc: stable@vger.kernel.org # 5.11+
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 507345b5ae6a57b7ecd7550ff39282ed20de7b8d upstream.
When there is no cached DFS referral of tcon->dfs_path, then reconnect
to same share.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 506c1da44fee32ba1d3a70413289ad58c772bba6 upstream.
We recently fixed DNS resolution of the server hostname during reconnect.
However, server IP address may change, even when the old one continues
to server (although sub-optimally).
We should schedule the next DNS resolution based on the TTL of
the DNS record used for the last resolution. This way, we resolve the
server hostname again when a DNS record expires.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cad83c968c2ebe97905f900326988ed37146c347 upstream.
As syzbot reported, there is an use-after-free issue during f2fs recovery:
Use-after-free write at 0xffff88823bc16040 (in kfence-#10):
kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486
f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869
f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945
mount_bdev+0x26c/0x3a0 fs/super.c:1367
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1497
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x196f/0x2be0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is multi f2fs filesystem instances can race on accessing
global fsync_entry_slab pointer, result in use-after-free issue of slab
cache, fixes to init/destroy this slab cache only once during module
init/destroy procedure to avoid this issue.
Reported-by: syzbot+9d90dad32dd9727ed084@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d574f985fe33efd6911f4d752de6f485a1ea732 upstream.
Avoid passing inode with
JFS_SBI(inode->i_sb)->ipimap == NULL to
diFree()[1]. GFP will appear:
struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap;
struct inomap *imap = JFS_IP(ipimap)->i_imap;
JFS_IP() will return invalid pointer when ipimap == NULL
Call Trace:
diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1]
jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154
evict+0x2ed/0x750 fs/inode.c:578
iput_final fs/inode.c:1654 [inline]
iput.part.0+0x3fe/0x820 fs/inode.c:1680
iput+0x58/0x70 fs/inode.c:1670
Reported-and-tested-by: syzbot+0a89a7b56db04c21a656@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61bb4a1c417e5b95d9edb4f887f131de32e419cb upstream.
After commit 618f003199c6 ("ext4: fix memory leak in
ext4_fill_super"), after the file system is remounted read-only, there
is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to
point at freed memory, which the call to ext4_stop_mmpd() can trip
over.
Fix this by only allowing kmmpd() to exit when it is stopped via
ext4_stop_mmpd().
Link: https://lore.kernel.org/r/20210707002433.3719773-1-tytso@mit.edu
Reported-by: Ye Bin <yebin10@huawei.com>
Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f4e3634a3b642225a530c292fdb1e8a4007507f5 upstream.
UBIFS may occur some problems with concurrent xattr_{set|get} and
listxattr operations, such as assertion failure, memory corruption,
stale xattr value[1].
Fix it by importing a new rw-lock in @ubifs_inode to serilize write
operations on xattr, concurrent read operations are still effective,
just like ext4.
[1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com
Fixes: 1e51764a3c2ac05a23 ("UBIFS: add new flash file system")
Cc: stable@vger.kernel.org # v2.6+
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e6ab8991c5d0b0deae0961dc22c0edd1dee328f5 ]
WARNING: CPU: 1 PID: 11749 at fs/io-wq.c:244 io_wqe_wake_worker fs/io-wq.c:244 [inline]
WARNING: CPU: 1 PID: 11749 at fs/io-wq.c:244 io_wqe_enqueue+0x7f6/0x910 fs/io-wq.c:751
A WARN_ON_ONCE() in io_wqe_wake_worker() can be triggered by a valid
userspace setup. Replace it with pr_warn.
Reported-by: syzbot+ea2f1484cffe5109dc10@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f7ede342c3342c4c26668f5168e2993e38bbd99c.1623949695.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 618f003199c6188e01472b03cdbba227f1dc5f24 ]
static int kthread(void *_create) will return -ENOMEM
or -EINTR in case of internal failure or
kthread_stop() call happens before threadfn call.
To prevent fancy error checking and make code
more straightforward we moved all cleanup code out
of kmmpd threadfn.
Also, dropped struct mmpd_data at all. Now struct super_block
is a threadfn data and struct buffer_head embedded into
struct ext4_sb_info.
Reported-by: syzbot+d9e482e303930fa4f6ff@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210430185046.15742-1-paskripkin@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa236c2b2d4436d9f19ee4e5d5924e90ffd7bb43 ]
In function udf_symlink, epos.bh is assigned with the value returned
by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c
and returns the value of sb_getblk function that could be NULL.
Then, epos.bh is used without any check, causing a possible
NULL pointer dereference when sb_getblk fails.
This fix adds a check to validate the value of epos.bh.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213083
Signed-off-by: Arturo Giusti <koredump@protonmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a149127be52fa7eaf5b3681a0317a2bbb772d5a9 ]
syzbot reported divide error in reiserfs.
The problem was in incorrect journal 1st block.
Syzbot's reproducer manualy generated wrong superblock
with incorrect 1st block. In journal_init() wasn't
any checks about this particular case.
For example, if 1st journal block is before superblock
1st block, it can cause zeroing important superblock members
in do_journal_end().
Link: https://lore.kernel.org/r/20210517121545.29645-1-paskripkin@gmail.com
Reported-by: syzbot+0ba9909df31c6a36974d@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 22634bc5620d29765e5199c7b230a372c7ddcda2 upstream.
We can't support IOPOLL with non-pollable request types, and we should
check for unused/reserved fields like we do for other request types.
Fixes: 14a1143b68ee ("io_uring: add support for IORING_OP_UNLINKAT")
Cc: stable@vger.kernel.org
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed7eb2592286ead7d3bfdf8adf65e65392167cc4 upstream.
We can't support IOPOLL with non-pollable request types, and we should
check for unused/reserved fields like we do for other request types.
Fixes: 80a261fd0032 ("io_uring: add support for IORING_OP_RENAMEAT")
Cc: stable@vger.kernel.org
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 976517f162a05f4315b2373fd11585c395506259 upstream.
There is a complaint against sys_io_uring_enter() blocking if it submits
stdin reads. The problem is in __io_file_supports_async(), which
sees that it's a cdev and allows it to be processed inline.
Punt char devices using generic rules of io_file_supports_async(),
including checking for presence of *_iter() versions of rw callbacks.
Apparently, it will affect most of cdevs with some exceptions like
null and zero devices.
Cc: stable@vger.kernel.org
Reported-by: Birk Hirdman <lonjil@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d60270856b8a4560a639ef5f76e55eb563633599.1623236455.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0508c1ad0f264a24c4643701823a45f6c9bd8146 upstream.
'ret' will be overwritten to 0 if erofs_sb_has_sb_chksum() return true,
thus 0 will return in some error handling cases. Fix to return negative
error code -EINVAL instead of 0.
Link: https://lore.kernel.org/r/20210519141657.3062715-1-weiyongjun1@huawei.com
Fixes: b858a4844cfb ("erofs: support superblock checksum")
Cc: stable <stable@vger.kernel.org> # 5.5+
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Gao Xiang <xiang@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fc2b430f559fdf32d5d1dd5ceaa40e12fb77bdf upstream.
Typically, the cryptographic APIs that fscrypt uses take keys as byte
arrays, which avoids endianness issues. However, siphash_key_t is an
exception. It is defined as 'u64 key[2];', i.e. the 128-bit key is
expected to be given directly as two 64-bit words in CPU endianness.
fscrypt_derive_dirhash_key() and fscrypt_setup_iv_ino_lblk_32_key()
forgot to take this into account. Therefore, the SipHash keys used to
index encrypted+casefolded directories differ on big endian vs. little
endian platforms, as do the SipHash keys used to hash inode numbers for
IV_INO_LBLK_32-encrypted directories. This makes such directories
non-portable between these platforms.
Fix this by always using the little endian order. This is a breaking
change for big endian platforms, but this should be fine in practice
since these features (encrypt+casefold support, and the IV_INO_LBLK_32
flag) aren't known to actually be used on any big endian platforms yet.
Fixes: aa408f835d02 ("fscrypt: derive dirhash key for casefolded directories")
Fixes: e3b1078bedd3 ("fscrypt: add support for IV_INO_LBLK_32 policies")
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://lore.kernel.org/r/20210605075033.54424-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 77f30bfcfcf484da7208affd6a9e63406420bf91 upstream.
When initializing a no-key name, fscrypt_fname_disk_to_usr() sets the
minor_hash to 0 if the (major) hash is 0.
This doesn't make sense because 0 is a valid hash code, so we shouldn't
ignore the filesystem-provided minor_hash in that case. Fix this by
removing the special case for 'hash == 0'.
This is an old bug that appears to have originated when the encryption
code in ext4 and f2fs was moved into fs/crypto/. The original ext4 and
f2fs code passed the hash by pointer instead of by value. So
'if (hash)' actually made sense then, as it was checking whether a
pointer was NULL. But now the hashes are passed by value, and
filesystems just pass 0 for any hashes they don't have. There is no
need to handle this any differently from the hashes actually being 0.
It is difficult to reproduce this bug, as it only made a difference in
the case where a filename's 32-bit major hash happened to be 0.
However, it probably had the largest chance of causing problems on
ubifs, since ubifs uses minor_hash to do lookups of no-key names, in
addition to using it as a readdir cookie. ext4 only uses minor_hash as
a readdir cookie, and f2fs doesn't use minor_hash at all.
Fixes: 0b81d0779072 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto")
Cc: <stable@vger.kernel.org> # v4.6+
Link: https://lore.kernel.org/r/20210527235236.2376556-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e5654de0f51890f88abd409ebf4867782431e81 upstream.
The compatibility issue between linux exfat and exfat of some camera
company was reported from Florian. In their exfat, if the number of files
exceeds any limit, the DataLength in stream entry of the directory is
no longer updated. So some files created from camera does not show in
linux exfat. because linux exfat doesn't allow that cpos becomes larger
than DataLength of stream entry. This patch check DataLength in stream
entry only if the type is ALLOC_NO_FAT_CHAIN and add the check ensure
that dentry offset does not exceed max dentries size(256 MB) to avoid
the circular FAT chain issue.
Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.9
Reported-by: Florian Cramer <flrncrmr@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Tested-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
transparent_hugepage_enabled()
[ Upstream commit e6be37b2e7bddfe0c76585ee7c7eee5acc8efeab ]
Since commit 99cb0dbd47a1 ("mm,thp: add read-only THP support for
(non-shmem) FS"), read-only THP file mapping is supported. But it forgot
to add checking for it in transparent_hugepage_enabled(). To fix it, we
add checking for read-only THP file mapping and also introduce helper
transhuge_vma_enabled() to check whether thp is enabled for specified vma
to reduce duplicated code. We rename transparent_hugepage_enabled to
transparent_hugepage_active to make the code easier to follow as suggested
by David Hildenbrand.
[linmiaohe@huawei.com: define transhuge_vma_enabled next to transhuge_vma_suitable]
Link: https://lkml.kernel.org/r/20210514093007.4117906-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210511134857.1581273-4-linmiaohe@huawei.com
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c252b087de08d3cb32468b54a158bd7ad0ae2f7 ]
When reading binary attributes in progress, buffer->bin_buffer is setup in
configfs_read_bin_file() but never freed.
Fixes: 03607ace807b4 ("configfs: implement binary attributes")
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
[hch: move the vfree rather than duplicating it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b0ed8443ae6458786580d36b7d5f8125535c5d4 ]
The caller of wb_get_create() should pin the memcg, because
wb_get_create() relies on this guarantee. The rcu read lock
only can guarantee that the memcg css returned by css_from_id()
cannot be released, but the reference of the memcg can be zero.
rcu_read_lock()
memcg_css = css_from_id()
wb_get_create(memcg_css)
cgwb_create(memcg_css)
// css_get can change the ref counter from 0 back to 1
css_get(memcg_css)
rcu_read_unlock()
Fix it by holding a reference to the css before calling
wb_get_create(). This is not a problem I encountered in the
real world. Just the result of a code review.
Fixes: 682aa8e1a6a1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates")
Link: https://lore.kernel.org/r/20210402091145.80635-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a14e3779dd58c16b30e56558146e5cc850ba8b0 ]
grab_mapping_entry() has a bug in handling of ENOMEM condition. Suppose
we have a PMD entry at index i which we are downgrading to a PTE entry.
grab_mapping_entry() will set pmd_downgrade to true, lock the entry, clear
the entry in xarray, and decrement mapping->nrpages. The it will call:
entry = dax_make_entry(pfn_to_pfn_t(0), flags);
dax_lock_entry(xas, entry);
which inserts new PTE entry into xarray. However this may fail allocating
the new node. We handle this by:
if (xas_nomem(xas, mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM))
goto retry;
however pmd_downgrade stays set to true even though 'entry' returned from
get_unlocked_entry() will be NULL now. And we will go again through the
downgrade branch. This is mostly harmless except that mapping->nrpages is
decremented again and we temporarily have an invalid entry stored in
xarray. Fix the problem by setting pmd_downgrade to false each time we
lookup the entry we work with so that it matches the entry we found.
Link: https://lkml.kernel.org/r/20210622160015.18004-1-jack@suse.cz
Fixes: b15cd800682f ("dax: Convert page fault handlers to XArray")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54e948c60cc843b6e84dc44496edc91f51d2a28e ]
The snprintf() function returns the number of bytes which would have been
printed if the buffer was large enough. In other words it can return ">=
remain" but this code assumes it returns "== remain".
The run time impact of this bug is not very severe. The next iteration
through the loop would trigger a WARN() when we pass a negative limit to
snprintf(). We would then return success instead of -E2BIG.
The kernel implementation of snprintf() will never return negatives so
there is no need to check and I have deleted that dead code.
Link: https://lkml.kernel.org/r/20210511135350.GV1955@kadam
Fixes: a860f6eb4c6a ("ocfs2: sysfile interfaces for online file check")
Fixes: 74ae4e104dfc ("ocfs2: Create stack glue sysfs files.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d07f3b081ee632268786601f55e1334d1f68b997 ]
pstore-blk just pokes directly into the pagecache for the block
device without going through the file operations for that by faking
up it's own file operations that do not match the block device ones.
As this breaks the control of the block layer of it's page cache,
and even now just works by accident only the best thing is to just
disable this driver.
Fixes: 17639f67c1d6 ("pstore/blk: Introduce backend for block devices")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210608161327.1537919-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1aeb6b563aea18cd55c73cf666d1d3245a00f08c ]
When a log recovery is in progress, lots of operations have to take that
into account, so we keep this status per tree during the operation. Long
time ago error handling revamp patch 79787eaab461 ("btrfs: replace many
BUG_ONs with proper error handling") removed clearing of the status in
an error branch. Add it back as was intended in e02119d5a7b4 ("Btrfs:
Add a write ahead tree log to optimize synchronous operations").
There are probably no visible effects, log replay is done only during
mount and if it fails all structures are cleared so the stale status
won't be kept.
Fixes: 79787eaab461 ("btrfs: replace many BUG_ONs with proper error handling")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
