Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull FIEMAP cleanups from Jan Kara:
"FIEMAP cleanups from Christoph transitioning all remaining filesystems
supporting FIEMAP (ext2, hpfs) to iomap API and removing the old
helper"
* tag 'fiemap_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: remove generic_block_fiemap
hpfs: use iomap_fiemap to implement ->fiemap
ext2: use iomap_fiemap to implement ->fiemap
ext2: make ext2_iomap_ops available unconditionally
|
|
Let's only enable realtime discard if and only if device supports
discard functionality.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We must flush all the dirty data when enabling checkpoint back. Let's guarantee
that first by adding a retry logic on sync_inodes_sb(). In addition to that,
this patch adds to flush data in fsync when checkpoint is disabled, which can
mitigate the sync_inodes_sb() failures in advance.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We need to unmap pages from userspace process before removing pagecache
in punch_hole() like we did in f2fs_setattr().
Similar change:
commit 5e44f8c374dc ("ext4: hole-punch use truncate_pagecache_range")
Fixes: fbfa2cc58d53 ("f2fs: add file operations")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In below path, it will return ENOENT if filesystem is shutdown:
- f2fs_map_blocks
- f2fs_get_dnode_of_data
- f2fs_get_node_page
- __get_node_page
- read_node_page
- is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN)
return -ENOENT
- force return value from ENOENT to 0
It should be fine for read case, since it indicates a hole condition,
and caller could use .m_next_pgofs to skip the hole and continue the
lookup.
However it may cause confusing for write case, since leaving a hole
there, and said nothing was wrong doesn't help.
There is at least one case from dax_iomap_actor() will complain that,
so fix this in prior to supporting dax in f2fs.
xfstest generic/388 reports below warning:
ubuntu godown: xfstests-induced forced shutdown of /mnt/scratch_f2fs:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 485833 at fs/dax.c:1127 dax_iomap_actor+0x339/0x370
Call Trace:
iomap_apply+0x1c4/0x7b0
? dax_iomap_rw+0x1c0/0x1c0
dax_iomap_rw+0xad/0x1c0
? dax_iomap_rw+0x1c0/0x1c0
f2fs_file_write_iter+0x5ab/0x970 [f2fs]
do_iter_readv_writev+0x273/0x2e0
do_iter_write+0xab/0x1f0
vfs_iter_write+0x21/0x40
iter_file_splice_write+0x287/0x540
do_splice+0x37c/0xa60
__x64_sys_splice+0x15f/0x3a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
ubuntu godown: xfstests-induced forced shutdown of /mnt/scratch_f2fs:
------------[ cut here ]------------
RIP: 0010:dax_iomap_pte_fault.isra.0+0x72e/0x14a0
Call Trace:
dax_iomap_fault+0x44/0x70
f2fs_dax_huge_fault+0x155/0x400 [f2fs]
f2fs_dax_fault+0x18/0x30 [f2fs]
__do_fault+0x4e/0x120
do_fault+0x3cf/0x7a0
__handle_mm_fault+0xa8c/0xf20
? find_held_lock+0x39/0xd0
handle_mm_fault+0x1b6/0x480
do_user_addr_fault+0x320/0xcd0
? rcu_read_lock_sched_held+0x67/0xc0
exc_page_fault+0x77/0x3f0
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
Fixes: 83a3bfdb5a8a ("f2fs: indicate shutdown f2fs to allow unmount successfully")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
There is a missing place we forgot to account .skipped_gc_rwsem, fix it.
Fixes: 6f8d4455060d ("f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adjusts unlock order of .i_mmap_sem and .i_gc_rwsem for
cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Don't create discard thread when device doesn't support realtime discard
or user specifies nodiscard mount option.
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify speedups when notification actually isn't used and support
for identifying processes which caused fanotify events through pidfd
instead of normal pid"
* tag 'fsnotify_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: optimize the case of no marks of any type
fsnotify: count all objects with attached connectors
fsnotify: count s_fsnotify_inode_refs for attached connectors
fsnotify: replace igrab() with ihold() on attach connector
fanotify: add pidfd support to the fanotify API
fanotify: introduce a generic info record copying helper
fanotify: minor cosmetic adjustments to fid labels
kernel/pid.c: implement additional checks upon pidfd_create() parameters
kernel/pid.c: remove static qualifier from pidfd_create()
|
|
Capitalize comments and end with period for better reading.
Also function comments are now little more kernel-doc style. This way we
can easily convert them to kernel-doc style if we want. Note that these
are not yet complete with this style. Example function comments start
with /* and in kernel-doc style they start /**.
Use imperative mood in function descriptions.
Change words like ntfs -> NTFS, linux -> Linux.
Use "we" not "I" when commenting code.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
When new work is added, io_wqe_enqueue() checks if we need to wake or
create a new worker. But that check is done outside the lock that
otherwise synchronizes us with a worker going to sleep, so we can end
up in the following situation:
CPU0 CPU1
lock
insert work
unlock
atomic_read(nr_running) != 0
lock
atomic_dec(nr_running)
no wakeup needed
Hold the wqe lock around the "need to wakeup" check. Then we can also get
rid of the temporary work_flags variable, as we know the work will remain
valid as long as we hold the lock.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring no longer queues async work off completion handlers that run in
hard or soft interrupt context, and that use case was the only reason that
io-wq had to use IRQ safe locks for wqe and worker locks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For the two places where new workers are created, we diligently check if
we are allowed to create a new worker. If we're currently at the limit
of how many workers of a given type we can have, then we don't create
any new ones.
If you have a mixed workload with various types of bound and unbounded
work, then it can happen that a worker finishes one type of work and
is then transitioned to the other type. For this case, we don't check
if we are actually allowed to do so. This can cause io-wq to temporarily
exceed the allowed number of workers for a given type.
When retrieving work, check that the types match. If they don't, check
if we are allowed to transition to the other type. If not, then don't
handle the new work.
Cc: stable@vger.kernel.org
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We allow updating normal timeouts, add support for adjusting timings of
linked timeouts as well.
Reported-by: Victor Stewart <v@nametag.social>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A preparation patch. Keep all queued linked timeout in a list, so they
may be found and updated.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Certain use cases want to use CLOCK_BOOTTIME or CLOCK_REALTIME rather than
CLOCK_MONOTONIC, instead of the default CLOCK_MONOTONIC.
Add an IORING_TIMEOUT_BOOTTIME and IORING_TIMEOUT_REALTIME flag that
allows timeouts and linked timeouts to use the selected clock source.
Only one clock source may be selected, and we -EINVAL the request if more
than one is given. If neither BOOTIME nor REALTIME are selected, the
previous default of MONOTONIC is used.
Link: https://github.com/axboe/liburing/issues/369
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io-wq divides work into two categories:
1) Work that completes in a bounded time, like reading from a regular file
or a block device. This type of work is limited based on the size of
the SQ ring.
2) Work that may never complete, we call this unbounded work. The amount
of workers here is just limited by RLIMIT_NPROC.
For various uses cases, it's handy to have the kernel limit the maximum
amount of pending workers for both categories. Provide a way to do with
with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation.
IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets
the max worker count to what is being passed in for each category. The
old values are returned into that same array. If 0 is being passed in for
either category, it simply returns the current value.
The value is capped at RLIMIT_NPROC. This actually isn't that important
as it's more of a hint, if we're exceeding the value then our attempt
to fork a new worker will fail. This happens naturally already if more
than one node is in the system, as these values are per-node internally
for io-wq.
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Link: https://github.com/axboe/liburing/issues/420
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The recursion protection for eventfd_signal() is based on a per CPU
variable and relies on the !RT semantics of spin_lock_irqsave() for
protecting this per CPU variable. On RT kernels spin_lock_irqsave() neither
disables preemption nor interrupts which allows the spin lock held section
to be preempted. If the preempting task invokes eventfd_signal() as well,
then the recursion warning triggers.
Paolo suggested to protect the per CPU variable with a local lock, but
that's heavyweight and actually not necessary. The goal of this protection
is to prevent the task stack from overflowing, which can be achieved with a
per task recursion protection as well.
Replace the per CPU variable with a per task bit similar to other recursion
protection bits like task_struct::in_page_owner. This works on both !RT and
RT kernels and removes as a side effect the extra per CPU storage.
No functional change for !RT kernels.
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/87wnp9idso.ffs@tglx
|
|
After trunking is discovered in nfs4_discover_server_trunking(),
add the transport to the old client structure if the allowed limit
of transports has not been reached.
An example: there exists a multi-homed server and client mounts
one server address and some volume and then doest another mount to
a different address of the same server and perhaps a different
volume. Previously, the client checks that this is a session
trunkable servers (same server), and removes the newly created
client structure along with its transport. Now, the client
adds the connection from the 2nd mount into the xprt switch of
the existing client (it leads to having 2 available connections).
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If we are adding new transports via rpc_clnt_test_and_add_xprt()
then check if we've reached the limit. Currently only pnfs path
adds transports via that function but this is done in
preparation when the client would add new transports when
session trunking is detected. A warning is logged if the
limit is reached.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This option will control up to how many xprts can the client
establish to the server with a distinct address (that means
nconnect connections are not counted towards this new limit).
This patch is setting up nfs structures to keeep track of the
max_connect limit (does not enforce it).
The default value is kept at 1 so that no current mounts that
don't want any additional connections would be effected. The
maximum value is set at 16.
Mounts to DS are not limited to default value of 1 but instead
set to the maximum default value of 16 (NFS_MAX_TRANSPORTS).
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
As eb96d5c97b08 ("SUNRPC handle EKEYEXPIRED in call_refreshresult")
commit handle EKEYEXPIRED in call_refreshresult, so there is only handle
when "task->tk_status" is equal "-EJUKEBOX" in nfs3_async_handle_jukebox.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Dan reported __write_overflow warning in ndr_read_string.
CC [M] fs/ksmbd/ndr.o
In file included from ./include/linux/string.h:253,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/ksmbd/ndr.c:7:
In function memcpy,
inlined from ndr_read_string at fs/ksmbd/ndr.c:86:2,
inlined from ndr_decode_dos_attr at fs/ksmbd/ndr.c:167:2:
./include/linux/fortify-string.h:219:4: error: call to __write_overflow
declared with attribute error: detected write beyond size of object
__write_overflow();
^~~~~~~~~~~~~~~~~~
This seems to be a false alarm because hex_attr size is always smaller
than n->length. This patch fix this warning by allocation hex_attr with
n->length.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
req->buf_index is u16 and so we rely on registered buffers indexes
fitting into it. Add a build check, so when the upper limit for the
number of buffers is lifted we get a compliation fail but not lurking
problems.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/787e8e1a17cea51ca6301426b1c4c4887b8bd676.1629920396.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's too easy to forget and misjudge about synchronisation in
io_req_task_cancel(), add a comment clarifying it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/71099083835f983a1fd73d5a3da6391924da8300.1629920396.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are three bugs in this code:
1) If indx_get_root() fails, then return -EINVAL instead of success.
2) On the "/* make root external */" -EOPNOTSUPP; error path it should
free "re" but it has a memory leak.
3) If indx_new() fails then it will lead to an error pointer dereference
when we call put_indx_node().
I've re-written the error handling to be more clear.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The "e" pointer is dereferenced before it has been checked for NULL.
Move the dereference after the NULL check to prevent an Oops.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Return -EINVAL if ni_find_attr() fails. Don't return success.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The ntfs_get_ea() function returns negative error codes or on success
it returns the length. In the original code a zero length return was
treated as -ENODATA and results in a NULL return. But it should be
treated as an invalid length and result in an PTR_ERR(-EINVAL) return.
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add a check for when the kzalloc() in init_rsttbl() fails. Some of
the callers checked for NULL and some did not. I went down the call
tree and added NULL checks where ever they were missing.
Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Use kcalloc/kmalloc_array over kzalloc/kmalloc when we allocate array.
Checkpatch found these after we did not use our own defined allocation
wrappers.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Problem with these wrapper is that we cannot take off example GFP_NOFS
flag. It is not recomended use those in all places. Also if we change
one driver specific wrapper to kernel wrapper then it would look really
weird. People should be most familiar with kernel wrappers so let's just
use those ones.
Driver specific alloc wrapper also confuse some static analyzing tools,
good example is example kernels checkpatch tool. After we converter
these to kernel specific then warnings is showed.
Following Coccinelle script was used to automate changing.
virtual patch
@alloc depends on patch@
expression x;
expression y;
@@
(
- ntfs_malloc(x)
+ kmalloc(x, GFP_NOFS)
|
- ntfs_zalloc(x)
+ kzalloc(x, GFP_NOFS)
|
- ntfs_vmalloc(x)
+ kvmalloc(x, GFP_NOFS)
|
- ntfs_free(x)
+ kfree(x)
|
- ntfs_vfree(x)
+ kvfree(x)
|
- ntfs_memdup(x, y)
+ kmemdup(x, y, GFP_NOFS)
)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The static checkers (Smatch) were complaining because QuadAlign() was
buggy. If you try to align something higher than UINT_MAX it got
truncated to a u32.
Smatch warning was:
fs/ntfs3/attrib.c:383 attr_set_size_res()
warn: was expecting a 64 bit value instead of '~7'
So that this will not happen again we will change all these macros to
kernel made ones. This can also help some other static analyzing tools
to give us better warnings.
Patch was generated with Coccinelle script and after that some style
issue was hand fixed.
Coccinelle script:
virtual patch
@alloc depends on patch@
expression x;
@@
(
- #define QuadAlign(n) (((n) + 7u) & (~7u))
|
- QuadAlign(x)
+ ALIGN(x, 8)
|
- #define IsQuadAligned(n) (!((size_t)(n)&7u))
|
- IsQuadAligned(x)
+ IS_ALIGNED(x, 8)
|
- #define Quad2Align(n) (((n) + 15u) & (~15u))
|
- Quad2Align(x)
+ ALIGN(x, 16)
|
- #define IsQuad2Aligned(n) (!((size_t)(n)&15u))
|
- IsQuad2Aligned(x)
+ IS_ALIGNED(x, 16)
|
- #define Quad4Align(n) (((n) + 31u) & (~31u))
|
- Quad4Align(x)
+ ALIGN(x, 32)
|
- #define IsSizeTAligned(n) (!((size_t)(n) & (sizeof(size_t) - 1)))
|
- IsSizeTAligned(x)
+ IS_ALIGNED(x, sizeof(size_t))
|
- #define DwordAlign(n) (((n) + 3u) & (~3u))
|
- DwordAlign(x)
+ ALIGN(x, 4)
|
- #define IsDwordAligned(n) (!((size_t)(n)&3u))
|
- IsDwordAligned(x)
+ IS_ALIGNED(x, 4)
|
- #define WordAlign(n) (((n) + 1u) & (~1u))
|
- WordAlign(x)
+ ALIGN(x, 2)
|
- #define IsWordAligned(n) (!((size_t)(n)&1u))
|
- IsWordAligned(x)
+ IS_ALIGNED(x, 2)
|
)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
First of this fix one none utf8 char in this comment block. Maybe
this happened because error in filesystem ;)
Also this block was hard to read because long lines so make it max 80
long. And while we doing this stuff make little better grammer.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Eliminate the follow versioncheck warning:
./fs/ntfs3/inode.c: 16 linux/version.h not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Fix the following fallthrough warnings:
fs/ntfs3/inode.c:1792:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/ntfs3/index.c:178:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
This helps with the ongoing efforts to globally enable
-Wimplicit-fallthrough for Clang.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
In one source file there is for some reason non utf8 char. But hey this
is fs development so this kind of thing might happen.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Clang warns:
fs/ntfs3/fsntfs.c:1874:9: warning: variable 'cnt' set but not used
[-Wunused-but-set-variable]
size_t cnt, off;
^
1 warning generated.
It is indeed unused so remove it.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The multiplication of the u32 data_size with a int is being performed
using 32 bit arithmetic however the results is being assigned to the
variable nbits that is a size_t (64 bit) value. Fix a potential
integer overflow by casting the u32 value to a size_t before the
multiply to use a size_t sized bit multiply operation.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add guards so that compiler will only include header files once.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
We do not need our own implementation for this function in this
driver. It is much better to use generic one.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
There is a spelling mistake in a ntfs_err error message. Also
fix various spelling mistakes in comments.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
As we have a more complicated task referencing, which apart from normal
task references includes taking tctx->inflight and caching all that, it
would be a good idea to have all that isolated in helpers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d9114d037f1c195897aa13f38a496078eca2afdb.1630023531.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Given a linkchain like this:
req0(link_flag)-->req1(link_flag)-->...-->reqn(no link_flag)
There is a problem:
- if some intermediate linked req like req1 's submittion fails, reqs
after it won't be cancelled.
- sqpoll disabled: maybe it's ok since users can get the error info
of req1 and stop submitting the following sqes.
- sqpoll enabled: definitely a problem, the following sqes will be
submitted in the next round.
The solution is to refactor the code logic to:
- if a linked req's submittion fails, just mark it and the head(if it
exists) as REQ_F_FAIL. Leverage req->result to indicate whether it
is failed or cancelled.
- submit or fail the whole chain when we come to the end of it.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210827094609.36052-3-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
req_set_fail() in io_submit_sqe() is redundant, remove it.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20210827094609.36052-2-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use refcount_t for the fscache_cookie refcount instead of atomic_t and
rename the 'usage' member to 'ref' in such cases. The tracepoints that
reference it change from showing "u=%d" to "r=%d".
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/162431204358.2908479.8006938388213098079.stgit@warthog.procyon.org.uk/
|
|
fscache_cookie_put() accesses the cookie it has just put inside the
tracepoint that monitors the change - but this is something it's not
allowed to do if we didn't reduce the count to zero.
Fix this by dropping most of those values from the tracepoint and grabbing
the cookie debug ID before doing the dec.
Also take the opportunity to switch over the usage and where arguments on
the tracepoint to put the reason last.
Fixes: a18feb55769b ("fscache: Add tracepoints")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/162431203107.2908479.3259582550347000088.stgit@warthog.procyon.org.uk/
|
|
The current hash algorithm used for hashing cookie keys is really bad,
producing almost no dispersion (after a test kernel build, ~30000 files
were split over just 18 out of the 32768 hash buckets).
Borrow the full_name_hash() hash function into fscache to do the hashing
for cookie keys and, in the future, volume keys.
I don't want to use full_name_hash() as-is because I want the hash value to
be consistent across arches and over time as the hash value produced may
get used on disk.
I can also optimise parts of it away as the key will always be a padded
array of aligned 32-bit words.
Fixes: ec0328e46d6e ("fscache: Maintain a catalogue of allocated cookies")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/162431201844.2908479.8293647220901514696.stgit@warthog.procyon.org.uk/
|
|
Change plain %p in format strings in cachefiles code to something more
useful, since %p is now hashed before printing and thus no longer matches
the contents of an oops register dump.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/160588476042.3465195.6837847445880367183.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/162431200692.2908479.9253374494073633778.stgit@warthog.procyon.org.uk/
|
|
Change plain %p in format strings in fscache code to something more useful,
since %p is now hashed before printing and thus no longer matches the
contents of an oops register dump.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/160588474843.3465195.5446072310069374803.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/162431199509.2908479.2950631488219944294.stgit@warthog.procyon.org.uk/
|