summaryrefslogtreecommitdiff
path: root/fs/udf
AgeCommit message (Collapse)AuthorFilesLines
2018-09-07udf: Drop pack pragma from udf_sb.hJan Kara1-2/+0
Drop pack pragma. The header file defines only in-memory structures. Signed-off-by: Jan Kara <jack@suse.cz>
2018-09-07udf: Drop freed bitmap / table supportJan Kara3-74/+0
We don't support Free Space Table and Free Space Bitmap as specified by UDF standard for writing as we don't support erasing blocks before overwriting them. Just drop the handling of these structures as partition descriptor checking code already makes sure such filesystems can be mounted only read-only. Signed-off-by: Jan Kara <jack@suse.cz>
2018-09-07udf: Fix crash during mountJan Kara1-5/+60
Fix a crash during an attempt to mount a filesystem that has both Unallocated Space Table and Unallocated Space Bitmap. Such filesystem actually violates the UDF standard so we just have to properly detect such situation and refuse to mount such filesystem read-write. When we are at it, verify also other constraints on the allocation information mandated by the standard. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-09-07udf: Prevent write-unsupported filesystem to be remounted read-writeJan Kara2-14/+18
There are certain filesystem features which we support for reading but not for writing. We properly refuse to mount such filesystems read-write however for some features (such as read-only partitions), we don't check for these features when remounting the filesystem from read-only to read-write. Thus such filesystems could be remounted read-write leading to strange behavior (most likely crashes). Fix the problem by marking in superblock whether the filesystem has some features that are supported in read-only mode and check this flag during remount. Signed-off-by: Jan Kara <jack@suse.cz>
2018-09-03udf: remove unused variables group_start and nr_groupsColin Ian King1-4/+2
Variables group_start and nr_groups are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warning: variable 'group_start' set but not used [-Wunused-but-set-variable] variable 'nr_groups' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-08-24udf: Fix mounting of Win7 created UDF filesystemsJan Kara1-12/+19
Win7 is creating UDF filesystems with single partition with number 8192. Current partition descriptor scanning code does not handle this well as it incorrectly assumes that partition numbers will form mostly contiguous space of small numbers. This results in unmountable media due to errors like: UDF-fs: error (device dm-1): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0 UDF-fs: warning (device dm-1): udf_fill_super: No fileset found Fix the problem by handling partition descriptors in a way that sparse partition numbering does not matter. Reported-and-tested-by: jean-luc malet <jeanluc.malet@gmail.com> CC: stable@vger.kernel.org Fixes: 7b78fd02fb19530fd101ae137a1f46aa466d9bb6 Signed-off-by: Jan Kara <jack@suse.cz>
2018-08-24udf: Remove dead code from udf_find_fileset()Jan Kara1-61/+1
Remove dead code and slightly simplify code in udf_find_fileset(). Signed-off-by: Jan Kara <jack@suse.cz>
2018-08-17Merge tag 'for_v4.19-rc1' of ↵Linus Torvalds7-41/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF and ext2 update from Jan Kara. * tag 'for_v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: use ktime_get_real_seconds for timestamps udf: convert inode stamps to timespec64
2018-08-14Merge branch 'work.mkdir' of ↵Linus Torvalds1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs icache updates from Al Viro: - NFS mkdir/open_by_handle race fix - analogous solution for FUSE, replacing the one currently in mainline - new primitive to be used when discarding halfway set up inodes on failed object creation; gives sane warranties re icache lookups not returning such doomed by still not freed inodes. A bunch of filesystems switched to that animal. - Miklos' fix for last cycle regression in iget5_locked(); -stable will need a slightly different variant, unfortunately. - misc bits and pieces around things icache-related (in adfs and jfs). * 'work.mkdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: jfs: don't bother with make_bad_inode() in ialloc() adfs: don't put inodes into icache new helper: inode_fake_hash() vfs: don't evict uninitialized inode jfs: switch to discard_new_inode() ext2: make sure that partially set up inodes won't be returned by ext2_iget() udf: switch to discard_new_inode() ufs: switch to discard_new_inode() btrfs: switch to discard_new_inode() new primitive: discard_new_inode() kill d_instantiate_no_diralias() nfs_instantiate(): prevent multiple aliases for directory inode
2018-08-03udf: switch to discard_new_inode()Al Viro1-8/+4
we don't want open-by-handle to pick an in-core inode that has failed setup halfway through. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-06-27udf: convert inode stamps to timespec64Arnd Bergmann7-41/+28
The VFS structures are finally converted to always use 64-bit timestamps, and this file system can represent a long range of on-disk timestamps already, so now let's fit in the missing bits for udf. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20udf: Drop unused arguments of udf_delete_aext()Jan Kara3-9/+7
udf_delete_aext() uses its last two arguments only as local variables. Drop them. Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20udf: Provide function for calculating dir entry lengthJan Kara3-15/+10
Provide function for calculating directory entry length and use to reduce code duplication. Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20udf: Detect incorrect directory sizeJan Kara1-0/+3
Detect when a directory entry is (possibly partially) beyond directory size and return EIO in that case since it means the filesystem is corrupted. Otherwise directory operations can further corrupt the directory and possibly also oops the kernel. CC: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> CC: stable@vger.kernel.org Reported-and-tested-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds5-48/+45
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-14Merge branch 'vfs_timespec64' of https://github.com/deepa-hub/vfs into ↵Arnd Bergmann5-48/+45
vfs-timespec64 Pull the timespec64 conversion from Deepa Dinamani: "The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The flag patch applies cleanly. I've not seen the timestamps update logic change often. The series applies cleanly on 4.17-rc6 and linux-next tip (top commit: next-20180517). I'm not sure how to merge this kind of a series with a flag patch. We are targeting 4.18 for this. Let me know if you have other suggestions. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. I've tried to keep the conversions with the script simple, to aid in the reviews. I've kept all the internal filesystem data structures and function signatures the same. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions." I've pulled it into a branch based on top of the NFS changes that are now in mainline, so I could resolve the non-obvious conflict between the two while merging. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-3/+4
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'udf_for_v4.18-rc1' of ↵Linus Torvalds4-150/+131
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull udf updates from Jan Kara: "UDF support for UTF-16 characters in file names" * tag 'udf_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Add support for decoding UTF-16 characters udf: Add support for encoding UTF-16 characters udf: Push sb argument to udf_name_[to|from]_CS0() udf: Convert ident strings to proper charset udf: Use UTF-32 <-> UTF-8 conversion functions from NLS udf: Always require NLS support
2018-06-06vfs: change inode times to use struct timespec64Deepa Dinamani2-17/+30
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-26udf: Simplify calls to udf_disk_stamp_to_timeDeepa Dinamani4-37/+21
Subsequent patches in the series convert inode timestamps to use struct timespec64 instead of struct timespec as part of solving the y2038 problem. commit fd3cfad374d4 ("udf: Convert udf_disk_stamp_to_time() to use mktime64()") eliminated the NULL return condition from udf_disk_stamp_to_time(). udf_time_to_disk_time() is always called with a valid dest pointer and the return value is ignored. Further, caller can as well check the dest pointer being passed in rather than return argument. Make both the functions return void. This will make the inode timestamp conversion simpler. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: jack@suse.com ---- Changes from v1: * fixed the pointer error pointed by Jan
2018-05-21Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-4/+2
Pull vfs fixes from Al Viro: "Assorted fixes all over the place" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: fix io_destroy(2) vs. lookup_ioctx() race ext2: fix a block leak nfsd: vfs_mkdir() might succeed leaving dentry negative unhashed cachefiles: vfs_mkdir() might succeed leaving dentry negative unhashed unfuck sysfs_mount() kernfs: deal with kernfs_fill_super() failures cramfs: Fix IS_ENABLED typo befs_lookup(): use d_splice_alias() affs_lookup: switch to d_splice_alias() affs_lookup(): close a race with affs_remove_link() fix breakage caused by d_find_alias() semantics change fs: don't scan the inode cache before SB_BORN is set do d_instantiate/unlock_new_inode combinations safely iov_iter: fix memory leak in pipe_get_pages_alloc() iov_iter: fix return type of __pipe_get_pages()
2018-05-11do d_instantiate/unlock_new_inode combinations safelyAl Viro1-4/+2
For anything NFS-exported we do _not_ want to unlock new inode before it has grown an alias; original set of fixes got the ordering right, but missed the nasty complication in case of lockdep being enabled - unlock_new_inode() does lockdep_annotate_inode_mutex_key(inode) which can only be done before anyone gets a chance to touch ->i_mutex. Unfortunately, flipping the order and doing unlock_new_inode() before d_instantiate() opens a window when mkdir can race with open-by-fhandle on a guessed fhandle, leading to multiple aliases for a directory inode and all the breakage that follows from that. Correct solution: a new primitive (d_instantiate_new()) combining these two in the right order - lockdep annotate, then d_instantiate(), then the rest of unlock_new_inode(). All combinations of d_instantiate() with unlock_new_inode() should be converted to that. Cc: stable@kernel.org # 2.6.29 and later Tested-by: Mike Marshall <hubcap@omnibond.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-19udf: Add support for decoding UTF-16 charactersJan Kara1-35/+68
Add support to decode characters outside of Base Multilingual Plane of UTF-16 encoded in CS0 charset of UDF. Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-19udf: Add support for encoding UTF-16 charactersJan Kara1-36/+43
Add support to store characters outside of Base Multilingual Plane of UTF-16 in CS0 encoding of UDF. Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-19udf: Push sb argument to udf_name_[to|from]_CS0()Jan Kara1-33/+24
Push superblock argument to udf_name_[to|from]_CS0() functions so that we can decide about character conversion functions there. Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-19udf: Convert ident strings to proper charsetJan Kara3-6/+14
iocharset= mount option specifies the character set used on *console* (not on disk). So even dstrings from VRS need to be converted from CS0 to the specified charset and not always UTF-8. This is barely user visible as those strings are shown only in UDF debug messages. CC: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-19udf: Use UTF-32 <-> UTF-8 conversion functions from NLSJan Kara1-63/+17
Instead of implementing our own functions converting to and from UTF-8, use the ones provided by NLS. Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-19udf: Always require NLS supportJan Kara2-13/+1
UDF needs to convert strings between OSTA CS0 charset and standard UTF8. Currently we implement our own utf-16 <-> utf-8 translations which is unnecessary code duplication. Always select NLS so that we can use translation functions from there. Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-18udf: Fix leak of UTF-16 surrogates into encoded stringsJan Kara1-0/+6
OSTA UDF specification does not mention whether the CS0 charset in case of two bytes per character encoding should be treated in UTF-16 or UCS-2. The sample code in the standard does not treat UTF-16 surrogates in any special way but on systems such as Windows which work in UTF-16 internally, filenames would be treated as being in UTF-16 effectively. In Linux it is more difficult to handle characters outside of Base Multilingual plane (beyond 0xffff) as NLS framework works with 2-byte characters only. Just make sure we don't leak UTF-16 surrogates into the resulting string when loading names from the filesystem for now. CC: stable@vger.kernel.org # >= v4.6 Reported-by: Mingye Wang <arthur200126@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-03-02udf: fix potential refcnt problem of nls moduleChengguang Xu1-5/+10
When specifiying iocharset multiple times in a mount or once/multiple in a remount, current option parsing may cause inaccurate refcount of nls module. Also, in the failure cleanup of option parsing, the condition of calling unload_nls is not sufficient. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-03-02udf: Do not mark possibly inconsistent filesystems as closedJan Kara2-2/+7
If logical volume integrity descriptor contains non-closed integrity type when mounting the volume, there are high chances that the volume is not consistent (device was detached before the filesystem was unmounted). Don't touch integrity type of such volume so that fsck can recognize it and check such filesystem. Reported-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Remove never implemented mount optionsJan Kara1-27/+1
Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Provide saner default for invalid uid / gidJan Kara1-2/+3
Currently when UDF filesystem is recorded without uid / gid (ids are set to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid= and gid= mount options. In such case filesystem could not be modified in any way as VFS refuses to modify files with invalid ids (even by root). This is confusing to users and not very useful default since such media mode is generally used for removable media. Use overflow[ug]id instead so that at least root can modify the filesystem. Reported-by: Steve Kenton <skenton@ou.edu> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Clean up handling of invalid uid/gidJan Kara2-8/+15
Current code relies on the fact that invalid uid/gid as defined by UDF 2.60 3.3.3.1 and 3.3.3.2 coincides with invalid uid/gid as used by the user namespaces implementation. Since this is only lucky coincidence, clean this up to avoid future surprises in case user namespaces implementation changes. Also this is more robust in presence of valid (from UDF point of view) uids / gids which do not map into current user namespace. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Apply uid/gid mount options also to new inodes & chownJan Kara2-0/+14
Currently newly created files belong to current user despite uid=<number> / gid=<number> mount options. This is confusing to users (as owner of the file will change after remount / eviction from cache) and also inconsistent with e.g. FAT with the same mount option. So apply uid=<number> and gid=<number> also to newly created inodes and similarly as FAT disallow to change owner of the file in this case. Reported-by: Steve Kenton <skenton@ou.edu> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Ignore [ug]id=ignore mount optionsJan Kara3-18/+8
Currently uid=ignore and gid=ignore make no sense without uid=<number> and gid=<number> respectively as they result in all files having invalid uid / gid which then doesn't allow even root to modify files and thus causes confusion. And since commit ca76d2d8031f "UDF: fix UID and GID mount option ignorance" (from over 10 years ago) uid=<number> overrides all uids on disk as uid=ignore does. So just silently ignore uid=ignore mount option. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Fix handling of Partition DescriptorsJan Kara1-32/+73
Current handling of Partition Descriptors in Volume Descriptor Sequence is buggy in several ways. Firstly, it does not take descriptor sequence numbers into account at all, thus any volume making serious use of them would be unmountable. Secondly, it does not handle Volume Descriptor Pointers or Volume Descriptor Sequence without Terminating Descriptor. Fix these problems by properly remembering all Partition Descriptors in the Volume Descriptor Sequence and their sequence numbers. This is made more complicated by the fact that we don't know number of partitions in advance and sequence numbers have to be tracked on per-partition basis. Reported-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-27udf: Unify common handling of descriptorsJan Kara1-22/+19
When scanning Volume Descriptor Sequence, several descriptors have exactly the same handling. Unify it. Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-16udf: Convert descriptor index definitions to enumJan Kara1-8/+9
Convert index definitions from defines to enum. It is a shorter description and easier to modify. Also remove VDS_POS_VOL_DESC_PTR since it is unused. Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-16udf: Allow volume descriptor sequence to be terminated by unrecorded blockJan Kara1-6/+2
According to ECMA-167 3/8.4.2 a volume descriptor sequence can be terminated also by an unrecorded block within the extent of volume descriptor sequence. Currently we errored out in such case making such volumes unmountable. Handle that case by treating any invalid block as a block terminating the sequence. Reported-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-16udf: Simplify handling of Volume Descriptor PointersJan Kara1-25/+16
According to ECMA-167 3/8.4.2 Volume Descriptor Pointer is terminating current extent of Volume Descriptor Sequence. Also according to ECMA-167 3/8.4.3 Volume Descriptor Sequence Number is not significant for Volume Descriptor Pointers. Simplify the handling of Volume Descriptor Pointers to take this into account. Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-02-16udf: Fix off-by-one in volume descriptor sequence lengthJan Kara1-3/+3
We pass one block beyond end of volume descriptor sequence into process_sequence() as 'lastblock' instead of the last block of the sequence. When the sequence is not terminated with TD descriptor, this could lead to false errors due to invalid blocks in volume descriptor sequence and thus unmountable volumes. Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-12-19udf: Sanitize nanoseconds for time stampsJan Kara1-0/+5
Reportedly some UDF filesystems are recorded with bogus subsecond values resulting in nanoseconds being over 10^9. Sanitize nanoseconds in time stamps when loading them from disk. Reported-by: Ian Turner <vectro@vectro.org> Signed-off-by: Jan Kara <jack@suse.cz>
2017-11-28Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds1-3/+3
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge branch 'for_linus' of ↵Linus Torvalds12-95/+105
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota, ext2, isofs and udf fixes from Jan Kara: - two small quota error handling fixes - two isofs fixes for architectures with signed char - several udf block number overflow and signedness fixes - ext2 rework of mount option handling to avoid GFP_KERNEL allocation with spinlock held - ... it also contains a patch to implement auditing of responses to fanotify permission events. That should have been in the fanotify pull request but I mistakenly merged that patch into a wrong branch and noticed only now at which point I don't think it's worth rebasing and redoing. * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: be aware of error from dquot_initialize quota: fix potential infinite loop isofs: use unsigned char types consistently isofs: fix timestamps beyond 2027 udf: Fix some sign-conversion warnings udf: Fix signed/unsigned format specifiers udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFF udf: Remove some outdate references from documentation udf: Avoid overflow when session starts at large offset ext2: Fix possible sleep in atomic during mount option parsing ext2: Parse mount options into a dedicated structure audit: Record fanotify access control decisions
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17udf: Fix some sign-conversion warningsSteve Magnani2-4/+4
Fix some warnings that appear when compiling with -Wconversion. A sub-optimal choice of variable type leads to warnings about conversion in both directions between unsigned and signed. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-17udf: Fix signed/unsigned format specifiersSteve Magnani8-49/+49
Fix problems noted in compilion with -Wformat=2 -Wformat-signedness. In particular, a mismatch between the signedness of a value and the signedness of its format specifier can result in unsigned values being printed as negative numbers, e.g.: Partition (0 type 1511) starts at physical 460, block length -1779968542 ...which occurs when mounting a large (> 1 TiB) UDF partition. Changes since V1: * Fixed additional issues noted in udf_bitmap_free_blocks(), udf_get_fileident(), udf_show_options() Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-17udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFFSteve Magnani10-41/+51
Large (> 1 TiB) UDF filesystems appear subject to several problems when mounted on 64-bit systems: * readdir() can fail on a directory containing File Identifiers residing above 0x7FFFFFFF. This manifests as a 'ls' command failing with EIO. * FIBMAP on a file block located above 0x7FFFFFFF can return a negative value. The low 32 bits are correct, but applications that don't mask the high 32 bits of the result can perform incorrectly. Per suggestion by Jan Kara, introduce a udf_pblk_t type for representation of UDF block addresses. Ultimately, all driver functions that manipulate UDF block addresses should use this type; for now, deployment is limited to functions with actual or potential sign extension issues. Changes to udf_readdir() and udf_block_map() address the issues noted above; other changes address potential similar issues uncovered during audit of the driver code. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-16udf: Avoid overflow when session starts at large offsetJan Kara1-1/+1
When session starts beyond offset 2^31 the arithmetics in udf_check_vsd() would overflow. Make sure the computation is done in large enough type. Reported-by: Cezary Sliwa <sliwa@ifpan.edu.pl> Signed-off-by: Jan Kara <jack@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 09:56:54 +0300