summaryrefslogtreecommitdiff
path: root/fs/fs-writeback.c
AgeCommit message (Collapse)AuthorFilesLines
2021-09-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-14/+14
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...
2021-09-03writeback: memcg: simplify cgroup_writeback_by_idShakeel Butt1-11/+9
Currently cgroup_writeback_by_id calls mem_cgroup_wb_stats() to get dirty pages for a memcg. However mem_cgroup_wb_stats() does a lot more than just get the number of dirty pages. Just directly get the number of dirty pages instead of calling mem_cgroup_wb_stats(). Also cgroup_writeback_by_id() is only called for best-effort dirty flushing, so remove the unused 'nr' parameter and no need to explicitly flush memcg stats. Link: https://lkml.kernel.org/r/20210722182627.2267368-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03writeback: reliably update bandwidth estimationJan Kara1-3/+0
Currently we trigger writeback bandwidth estimation from balance_dirty_pages() and from wb_writeback(). However neither of these need to trigger when the system is relatively idle and writeback is triggered e.g. from fsync(2). Make sure writeback estimates happen reliably by triggering them from do_writepages(). Link: https://lkml.kernel.org/r/20210713104716.22868-2-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Cc: Michael Stapelberg <stapelberg+linux@google.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03writeback: track number of inodes under writebackJan Kara1-0/+5
Patch series "writeback: Fix bandwidth estimates", v4. Fix estimate of writeback throughput when device is not fully busy doing writeback. Michael Stapelberg has reported that such workload (e.g. generated by linking) tends to push estimated throughput down to 0 and as a result writeback on the device is practically stalled. The first three patches fix the reported issue, the remaining two patches are unrelated cleanups of problems I've noticed when reading the code. This patch (of 4): Track number of inodes under writeback for each bdi_writeback structure. We will use this to decide whether wb does any IO and so we can estimate its writeback throughput. In principle we could use number of pages under writeback (WB_WRITEBACK counter) for this however normal percpu counter reads are too inaccurate for our purposes and summing the counter is too expensive. Link: https://lkml.kernel.org/r/20210713104519.16394-1-jack@suse.cz Link: https://lkml.kernel.org/r/20210713104716.22868-1-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Michael Stapelberg <stapelberg+linux@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-23fs: kill sync_inodeJosef Bacik1-18/+1
Now that all users of sync_inode() have been deleted, remove sync_inode(). Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-24writeback, cgroup: do not reparent dax inodesRoman Gushchin1-0/+3
The inode switching code is not suited for dax inodes. An attempt to switch a dax inode to a parent writeback structure (as a part of a writeback cleanup procedure) results in a panic like this: run fstests generic/270 at 2021-07-15 05:54:02 XFS (pmem0p2): EXPERIMENTAL big timestamp feature in use. Use at your own risk! XFS (pmem0p2): DAX enabled. Warning: EXPERIMENTAL, use at your own risk XFS (pmem0p2): EXPERIMENTAL inode btree counters feature in use. Use at your own risk! XFS (pmem0p2): Mounting V5 Filesystem XFS (pmem0p2): Ending clean mount XFS (pmem0p2): Quotacheck needed: Please wait. XFS (pmem0p2): Quotacheck: Done. XFS (pmem0p2): xlog_verify_grant_tail: space > BBTOB(tail_blocks) XFS (pmem0p2): xlog_verify_grant_tail: space > BBTOB(tail_blocks) XFS (pmem0p2): xlog_verify_grant_tail: space > BBTOB(tail_blocks) BUG: unable to handle page fault for address: 0000000005b0f669 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 13 PID: 10479 Comm: kworker/13:16 Not tainted 5.14.0-rc1-master-8096acd7442e+ #8 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 09/13/2016 Workqueue: inode_switch_wbs inode_switch_wbs_work_fn RIP: 0010:inode_do_switch_wbs+0xaf/0x470 Code: 00 30 0f 85 c1 03 00 00 0f 1f 44 00 00 31 d2 48 c7 c6 ff ff ff ff 48 8d 7c 24 08 e8 eb 49 1a 00 48 85 c0 74 4a bb ff ff ff ff <48> 8b 50 08 48 8d 4a ff 83 e2 01 48 0f 45 c1 48 8b 00 a8 08 0f 85 RSP: 0018:ffff9c66691abdc8 EFLAGS: 00010002 RAX: 0000000005b0f661 RBX: 00000000ffffffff RCX: ffff89e6a21382b0 RDX: 0000000000000001 RSI: ffff89e350230248 RDI: ffffffffffffffff RBP: ffff89e681d19400 R08: 0000000000000000 R09: 0000000000000228 R10: ffffffffffffffff R11: ffffffffffffffc0 R12: ffff89e6a2138130 R13: ffff89e316af7400 R14: ffff89e316af6e78 R15: ffff89e6a21382b0 FS: 0000000000000000(0000) GS:ffff89ee5fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005b0f669 CR3: 0000000cb2410004 CR4: 00000000001706e0 Call Trace: inode_switch_wbs_work_fn+0xb6/0x2a0 process_one_work+0x1e6/0x380 worker_thread+0x53/0x3d0 kthread+0x10f/0x130 ret_from_fork+0x22/0x30 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables nfnetlink bridge stp llc rfkill sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit iTCO_wdt irqbypass drm_kms_helper iTCO_vendor_support acpi_ipmi rapl syscopyarea sysfillrect intel_cstate ipmi_si sysimgblt ioatdma dax_pmem_compat fb_sys_fops ipmi_devintf device_dax i2c_i801 pcspkr intel_uncore hpilo nd_pmem cec dax_pmem_core dca i2c_smbus acpi_tad lpc_ich ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sd_mod t10_pi crct10dif_pclmul crc32_pclmul crc32c_intel tg3 ghash_clmulni_intel serio_raw hpsa hpwdt scsi_transport_sas wmi dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000005b0f669 ---[ end trace ed2105faff8384f3 ]--- RIP: 0010:inode_do_switch_wbs+0xaf/0x470 Code: 00 30 0f 85 c1 03 00 00 0f 1f 44 00 00 31 d2 48 c7 c6 ff ff ff ff 48 8d 7c 24 08 e8 eb 49 1a 00 48 85 c0 74 4a bb ff ff ff ff <48> 8b 50 08 48 8d 4a ff 83 e2 01 48 0f 45 c1 48 8b 00 a8 08 0f 85 RSP: 0018:ffff9c66691abdc8 EFLAGS: 00010002 RAX: 0000000005b0f661 RBX: 00000000ffffffff RCX: ffff89e6a21382b0 RDX: 0000000000000001 RSI: ffff89e350230248 RDI: ffffffffffffffff RBP: ffff89e681d19400 R08: 0000000000000000 R09: 0000000000000228 R10: ffffffffffffffff R11: ffffffffffffffc0 R12: ffff89e6a2138130 R13: ffff89e316af7400 R14: ffff89e316af6e78 R15: ffff89e6a21382b0 FS: 0000000000000000(0000) GS:ffff89ee5fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005b0f669 CR3: 0000000cb2410004 CR4: 00000000001706e0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x15200000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The crash happens on an attempt to iterate over attached pagecache pages and check the dirty flag: a dax inode's xarray contains pfn's instead of generic struct page pointers. This happens for DAX and not for other kinds of non-page entries in the inodes because it's a tagged iteration, and shadow/swap entries are never tagged; only DAX entries get tagged. Fix the problem by bailing out (with the false return value) of inode_prepare_sbs_switch() if a dax inode is passed. [willy@infradead.org: changelog addition] Link: https://lkml.kernel.org/r/20210719171350.3876830-1-guro@fb.com Fixes: c22d70a162d3 ("writeback, cgroup: release dying cgwbs by switching attached inodes") Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Reported-by: Darrick J. Wong <djwong@kernel.org> Tested-by: Darrick J. Wong <djwong@kernel.org> Tested-by: Murphy Zhou <jencce.kernel@gmail.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01Merge tag 'fs_for_v5.14-rc1' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull misc fs updates from Jan Kara: "The new quotactl_fd() syscall (remake of quotactl_path() syscall that got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs, isofs, and writeback fixes and cleanups" * tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: writeback: fix obtain a reference to a freeing memcg css quota: remove unnecessary oom message isofs: remove redundant continue statement quota: Wire up quotactl_fd syscall quota: Change quotactl_path() systcall to an fd-based one reiserfs: Remove unneed check in reiserfs_write_full_page() udf: Fix NULL pointer dereference in udf_symlink function reiserfs: add check for invalid 1st journal block
2021-06-30Merge tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-25/+0
Pull core block updates from Jens Axboe: - disk events cleanup (Christoph) - gendisk and request queue allocation simplifications (Christoph) - bdev_disk_changed cleanups (Christoph) - IO priority improvements (Bart) - Chained bio completion trace fix (Edward) - blk-wbt fixes (Jan) - blk-wbt enable/disable fix (Zhang) - Scheduler dispatch improvements (Jan, Ming) - Shared tagset scheduler improvements (John) - BFQ updates (Paolo, Luca, Pietro) - BFQ lock inversion fix (Jan) - Documentation improvements (Kir) - CLONE_IO block cgroup fix (Tejun) - Remove of ancient and deprecated block dump feature (zhangyi) - Discard merge fix (Ming) - Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas, Yang) * tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits) block: fix discard request merge block/mq-deadline: Remove a WARN_ON_ONCE() call blk-mq: update hctx->dispatch_busy in case of real scheduler blk: Fix lock inversion between ioc lock and bfqd lock bfq: Remove merged request already in bfq_requests_merged() block: pass a gendisk to bdev_disk_changed block: move bdev_disk_changed block: add the events* attributes to disk_attrs block: move the disk events code to a separate file block: fix trace completion for chained bio block/partitions/msdos: Fix typo inidicator -> indicator block, bfq: reset waker pointer with shared queues block, bfq: check waker only for queues with no in-flight I/O block, bfq: avoid delayed merge of async queues block, bfq: boost throughput by extending queue-merging times block, bfq: consider also creation time in delayed stable merge block, bfq: fix delayed stable merge check block, bfq: let also stably merged queues enjoy weight raising blk-wbt: make sure throttle is enabled properly blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled() ...
2021-06-29writeback, cgroup: release dying cgwbs by switching attached inodesRoman Gushchin1-10/+101
Asynchronously try to release dying cgwbs by switching attached inodes to the nearest living ancestor wb. It helps to get rid of per-cgroup writeback structures themselves and of pinned memory and block cgroups, which are significantly larger structures (mostly due to large per-cpu statistics data). This prevents memory waste and helps to avoid different scalability problems caused by large piles of dying cgroups. Reuse the existing mechanism of inode switching used for foreign inode detection. To speed things up batch up to 115 inode switching in a single operation (the maximum number is selected so that the resulting struct inode_switch_wbs_context can fit into 1024 bytes). Because every switching consists of two steps divided by an RCU grace period, it would be too slow without batching. Please note that the whole batch counts as a single operation (when increasing/decreasing isw_nr_in_flight). This allows to keep umounting working (flush the switching queue), however prevents cleanups from consuming the whole switching quota and effectively blocking the frn switching. A cgwb cleanup operation can fail due to different reasons (e.g. not enough memory, the cgwb has an in-flight/pending io, an attached inode in a wrong state, etc). In this case the next scheduled cleanup will make a new attempt. An attempt is made each time a new cgwb is offlined (in other words a memcg and/or a blkcg is deleted by a user). In the future an additional attempt scheduled by a timer can be implemented. [guro@fb.com: replace open-coded "115" with arithmetic] Link: https://lkml.kernel.org/r/YMEcSBcq/VXMiPPO@carbon.dhcp.thefacebook.com [guro@fb.com: add smp_mb() to inode_prepare_wbs_switch()] Link: https://lkml.kernel.org/r/YMFa+guFw7OFjf3X@carbon.dhcp.thefacebook.com [willy@infradead.org: fix documentation] Link: https://lkml.kernel.org/r/20210615200242.1716568-2-willy@infradead.org Link: https://lkml.kernel.org/r/20210608230225.2078447-9-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29writeback, cgroup: support switching multiple inodes at onceRoman Gushchin1-42/+64
Currently only a single inode can be switched to another writeback structure at once. That means to switch an inode a separate inode_switch_wbs_context structure must be allocated, and a separate rcu callback and work must be scheduled. It's fine for the existing ad-hoc switching, which is not happening that often, but sub-optimal for massive switching required in order to release a writeback structure. To prepare for it, let's add a support for switching multiple inodes at once. Instead of containing a single inode pointer, inode_switch_wbs_context will contain a NULL-terminated array of inode pointers. inode_do_switch_wbs() will be called for each inode. To optimize the locking bdi->wb_switch_rwsem, old_wb's and new_wb's list_locks will be acquired and released only once altogether for all inodes. wb_wakeup() will be also be called only once. Instead of calling wb_put(old_wb) after each successful switch, wb_put_many() is introduced and used. Link: https://lkml.kernel.org/r/20210608230225.2078447-8-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29writeback, cgroup: split out the functional part of inode_switch_wbs_work_fn()Roman Gushchin1-8/+11
Split out the functional part of the inode_switch_wbs_work_fn() function as inode_do switch_wbs() to reuse it later for switching inodes attached to dying cgwbs. This commit doesn't bring any functional changes. Link: https://lkml.kernel.org/r/20210608230225.2078447-7-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29writeback, cgroup: keep list of inodes attached to bdi_writebackRoman Gushchin1-34/+59
Currently there is no way to iterate over inodes attached to a specific cgwb structure. It limits the ability to efficiently reclaim the writeback structure itself and associated memory and block cgroup structures without scanning all inodes belonging to a sb, which can be prohibitively expensive. While dirty/in-active-writeback an inode belongs to one of the bdi_writeback's io lists: b_dirty, b_io, b_more_io and b_dirty_time. Once cleaned up, it's removed from all io lists. So the inode->i_io_list can be reused to maintain the list of inodes, attached to a bdi_writeback structure. This patch introduces a new wb->b_attached list, which contains all inodes which were dirty at least once and are attached to the given cgwb. Inodes attached to the root bdi_writeback structures are never placed on such list. The following patch will use this list to try to release cgwbs structures more efficiently. Link: https://lkml.kernel.org/r/20210608230225.2078447-6-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29writeback, cgroup: switch to rcu_work API in inode_switch_wbs()Roman Gushchin1-14/+4
Inode's wb switching requires two steps divided by an RCU grace period. It's currently implemented as an RCU callback inode_switch_wbs_rcu_fn(), which schedules inode_switch_wbs_work_fn() as a work. Switching to the rcu_work API allows to do the same in a cleaner and slightly shorter form. Link: https://lkml.kernel.org/r/20210608230225.2078447-5-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29writeback, cgroup: increment isw_nr_in_flight before grabbing an inodeRoman Gushchin1-2/+3
isw_nr_in_flight is used to determine whether the inode switch queue should be flushed from the umount path. Currently it's increased after grabbing an inode and even scheduling the switch work. It means the umount path can walk past cleanup_offline_cgwb() with active inode references, which can result in a "Busy inodes after unmount." message and use-after-free issues (with inode->i_sb which gets freed). Fix it by incrementing isw_nr_in_flight before doing anything with the inode and decrementing in the case when switching wasn't scheduled. The problem hasn't yet been seen in the real life and was discovered by Jan Kara by looking into the code. Link: https://lkml.kernel.org/r/20210608230225.2078447-4-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Suggested-by: Jan Kara <jack@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29writeback, cgroup: add smp_mb() to cgroup_writeback_umount()Roman Gushchin1-0/+6
A full memory barrier is required between clearing SB_ACTIVE flag in generic_shutdown_super() and checking isw_nr_in_flight in cgroup_writeback_umount(), otherwise a new switch operation might be scheduled after atomic_read(&isw_nr_in_flight) returned 0. This would result in a non-flushed isw_wq, and a potential crash. The problem hasn't yet been seen in the real life and was discovered by Jan Kara by looking into the code. Link: https://lkml.kernel.org/r/20210608230225.2078447-3-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Jan Kara <jack@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29writeback, cgroup: do not switch inodes with I_WILL_FREE flagRoman Gushchin1-4/+4
Patch series "cgroup, blkcg: prevent dirty inodes to pin dying memory cgroups", v9. When an inode is getting dirty for the first time it's associated with a wb structure (see __inode_attach_wb()). It can later be switched to another wb (if e.g. some other cgroup is writing a lot of data to the same inode), but otherwise stays attached to the original wb until being reclaimed. The problem is that the wb structure holds a reference to the original memory and blkcg cgroups. So if an inode has been dirty once and later is actively used in read-only mode, it has a good chance to pin down the original memory and blkcg cgroups forever. This is often the case with services bringing data for other services, e.g. updating some rpm packages. In the real life it becomes a problem due to a large size of the memcg structure, which can easily be 1000x larger than an inode. Also a really large number of dying cgroups can raise different scalability issues, e.g. making the memory reclaim costly and less effective. To solve the problem inodes should be eventually detached from the corresponding writeback structure. It's inefficient to do it after every writeback completion. Instead it can be done whenever the original memory cgroup is offlined and writeback structure is getting killed. Scanning over a (potentially long) list of inodes and detach them from the writeback structure can take quite some time. To avoid scanning all inodes, attached inodes are kept on a new list (b_attached). To make it less noticeable to a user, the scanning and switching is performed from a work context. Big thanks to Jan Kara, Dennis Zhou, Hillf Danton and Tejun Heo for their ideas and contribution to this patchset. This patch (of 8): If an inode's state has I_WILL_FREE flag set, the inode will be freed soon, so there is no point in trying to switch the inode to a different cgwb. I_WILL_FREE was ignored since the introduction of the inode switching, so it looks like it doesn't lead to any noticeable issues for a user. This is why the patch is not intended for a stable backport. Link: https://lkml.kernel.org/r/20210608230225.2078447-1-guro@fb.com Link: https://lkml.kernel.org/r/20210608230225.2078447-2-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Suggested-by: Jan Kara <jack@suse.cz> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-28writeback: fix obtain a reference to a freeing memcg cssMuchun Song1-2/+7
The caller of wb_get_create() should pin the memcg, because wb_get_create() relies on this guarantee. The rcu read lock only can guarantee that the memcg css returned by css_from_id() cannot be released, but the reference of the memcg can be zero. rcu_read_lock() memcg_css = css_from_id() wb_get_create(memcg_css) cgwb_create(memcg_css) // css_get can change the ref counter from 0 back to 1 css_get(memcg_css) rcu_read_unlock() Fix it by holding a reference to the css before calling wb_get_create(). This is not a problem I encountered in the real world. Just the result of a code review. Fixes: 682aa8e1a6a1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates") Link: https://lore.kernel.org/r/20210402091145.80635-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz>
2021-05-24block_dump: remove block_dump feature in mark_inode_dirty()zhangyi (F)1-25/+0
block_dump is an old debugging interface, one of it's functions is used to print the information about who write which file on disk. If we enable block_dump through /proc/sys/vm/block_dump and turn on debug log level, we can gather information about write process name, target file name and disk from kernel message. This feature is realized in block_dump___mark_inode_dirty(), it print above information into kernel message directly when marking inode dirty, so it is noisy and can easily trigger log storm. At the same time, get the dentry refcount is also not safe, we found it will lead to deadlock on ext4 file system with data=journal mode. After tracepoints has been introduced into the kernel, we got a tracepoint in __mark_inode_dirty(), which is a better replacement of block_dump___mark_inode_dirty(). The only downside is that it only trace the inode number and not a file name, but it probably doesn't matter because the original printed file name in block_dump is not accurate in some cases, and we can still find it through the inode number and device id. So this patch delete the dirting inode part of block_dump feature. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210313030146.2882027-2-yi.zhang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-13fs: improve comments for writeback_single_inode()Eric Biggers1-24/+33
Some comments for writeback_single_inode() and __writeback_single_inode() are outdated or not very helpful, especially with regards to writeback list handling. Update them. Link: https://lore.kernel.org/r/20210112190253.64307-10-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-13fs: drop redundant check from __writeback_single_inode()Eric Biggers1-1/+1
wbc->for_sync implies wbc->sync_mode == WB_SYNC_ALL, so there's no need to check for both. Just check for WB_SYNC_ALL. Link: https://lore.kernel.org/r/20210112190253.64307-9-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-13fs: clean up __mark_inode_dirty() a bitEric Biggers1-19/+30
Improve some comments, and don't bother checking for the I_DIRTY_TIME flag in the case where we just cleared it. Also, warn if I_DIRTY_TIME and I_DIRTY_PAGES are passed to __mark_inode_dirty() at the same time, as this case isn't handled. Link: https://lore.kernel.org/r/20210112190253.64307-8-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-13fs: pass only I_DIRTY_INODE flags to ->dirty_inodeEric Biggers1-1/+1
->dirty_inode is now only called when I_DIRTY_INODE (I_DIRTY_SYNC and/or I_DIRTY_DATASYNC) is set. However it may still be passed other dirty flags at the same time, provided that these other flags happened to be passed to __mark_inode_dirty() at the same time as I_DIRTY_INODE. This doesn't make sense because there is no reason for filesystems to care about these extra flags. Nor are filesystems notified about all updates to these other flags. Therefore, mask the flags before passing them to ->dirty_inode. Also properly document ->dirty_inode in vfs.rst. Link: https://lore.kernel.org/r/20210112190253.64307-7-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-13fs: don't call ->dirty_inode for lazytime timestamp updatesEric Biggers1-3/+3
There is no need to call ->dirty_inode for lazytime timestamp updates (i.e. for __mark_inode_dirty(I_DIRTY_TIME)), since by the definition of lazytime, filesystems must ignore these updates. Filesystems only need to care about the updated timestamps when they expire. Therefore, only call ->dirty_inode when I_DIRTY_INODE is set. Based on a patch from Christoph Hellwig: https://lore.kernel.org/r/20200325122825.1086872-4-hch@lst.de Link: https://lore.kernel.org/r/20210112190253.64307-6-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-13fs: fix lazytime expiration handling in __writeback_single_inode()Eric Biggers1-11/+13
When lazytime is enabled and an inode is being written due to its in-memory updated timestamps having expired, either due to a sync() or syncfs() system call or due to dirtytime_expire_interval having elapsed, the VFS needs to inform the filesystem so that the filesystem can copy the inode's timestamps out to the on-disk data structures. This is done by __writeback_single_inode() calling mark_inode_dirty_sync(), which then calls ->dirty_inode(I_DIRTY_SYNC). However, this occurs after __writeback_single_inode() has already cleared the dirty flags from ->i_state. This causes two bugs: - mark_inode_dirty_sync() redirties the inode, causing it to remain dirty. This wastefully causes the inode to be written twice. But more importantly, it breaks cases where sync_filesystem() is expected to clean dirty inodes. This includes the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl (as reported at https://lore.kernel.org/r/20200306004555.GB225345@gmail.com), as well as possibly filesystem freezing (freeze_super()). - Since ->i_state doesn't contain I_DIRTY_TIME when ->dirty_inode() is called from __writeback_single_inode() for lazytime expiration, xfs_fs_dirty_inode() ignores the notification. (XFS only cares about lazytime expirations, and it assumes that i_state will contain I_DIRTY_TIME during those.) Therefore, lazy timestamps aren't persisted by sync(), syncfs(), or dirtytime_expire_interval on XFS. Fix this by moving the call to mark_inode_dirty_sync() to earlier in __writeback_single_inode(), before the dirty flags are cleared from i_state. This makes filesystems be properly notified of the timestamp expiration, and it avoids incorrectly redirtying the inode. This fixes xfstest generic/580 (which tests FS_IOC_REMOVE_ENCRYPTION_KEY) when run on ext4 or f2fs with lazytime enabled. It also fixes the new lazytime xfstest I've proposed, which reproduces the above-mentioned XFS bug (https://lore.kernel.org/r/20210105005818.92978-1-ebiggers@kernel.org). Alternatively, we could call ->dirty_inode(I_DIRTY_SYNC) directly. But due to the introduction of I_SYNC_QUEUED, mark_inode_dirty_sync() is the right thing to do because mark_inode_dirty_sync() now knows not to move the inode to a writeback list if it is currently queued for sync. Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") Cc: stable@vger.kernel.org Depends-on: 5afced3bf281 ("writeback: Avoid skipping inode writeback") Link: https://lore.kernel.org/r/20210112190253.64307-2-ebiggers@kernel.org Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
2020-12-16writeback: don't warn on an unregistered BDI in __mark_inode_dirtyChristoph Hellwig1-4/+0
BDIs get unregistered during device removal, and this WARN can be trivially triggered by hot-removing a NVMe device while running fsx It is otherwise harmless as we still hold a BDI reference, and the writeback has been shut down already. Link: https://lore.kernel.org/r/20200928122613.434820-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+4
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-09-24bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flagChristoph Hellwig1-3/+4
Replace the two negative flags that are always used together with a single positive flag that indicates the writeback capability instead of two related non-capabilities. Also remove the pointless wrappers to just check the flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-19fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match ↵Tobias Klauser1-1/+1
prototype Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the definition of dirtytime_interval_handler to match its prototype in linux/writeback.h which fixes the following sparse error/warning: fs/fs-writeback.c:2189:50: warning: incorrect type in argument 3 (different address spaces) fs/fs-writeback.c:2189:50: expected void * fs/fs-writeback.c:2189:50: got void [noderef] __user *buffer fs/fs-writeback.c:2184:5: error: symbol 'dirtytime_interval_handler' redeclared with different type (incompatible argument 3 (different address spaces)): fs/fs-writeback.c:2184:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... ) fs/fs-writeback.c: note: in included file: ./include/linux/writeback.h:374:5: note: previously declared as: ./include/linux/writeback.h:374:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... ) Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093140.13434-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-15writeback: Drop I_DIRTY_TIME_EXPIREJan Kara1-17/+11
The only use of I_DIRTY_TIME_EXPIRE is to detect in __writeback_single_inode() that inode got there because flush worker decided it's time to writeback the dirty inode time stamps (either because we are syncing or because of age). However we can detect this directly in __writeback_single_inode() and there's no need for the strange propagation with I_DIRTY_TIME_EXPIRE flag. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2020-06-15writeback: Fix sync livelock due to b_dirty_time processingJan Kara1-27/+17
When we are processing writeback for sync(2), move_expired_inodes() didn't set any inode expiry value (older_than_this). This can result in writeback never completing if there's steady stream of inodes added to b_dirty_time list as writeback rechecks dirty lists after each writeback round whether there's more work to be done. Fix the problem by using sync(2) start time is inode expiry value when processing b_dirty_time list similarly as for ordinarily dirtied inodes. This requires some refactoring of older_than_this handling which simplifies the code noticeably as a bonus. Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2020-06-15writeback: Avoid skipping inode writebackJan Kara1-5/+12
Inode's i_io_list list head is used to attach inode to several different lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker prepares a list of inodes to writeback e.g. for sync(2), it moves inodes to b_io list. Thus it is critical for sync(2) data integrity guarantees that inode is not requeued to any other writeback list when inode is queued for processing by flush worker. That's the reason why writeback_single_inode() does not touch i_io_list (unless the inode is completely clean) and why __mark_inode_dirty() does not touch i_io_list if I_SYNC flag is set. However there are two flaws in the current logic: 1) When inode has only I_DIRTY_TIME set but it is already queued in b_io list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC) can still move inode back to b_dirty list resulting in skipping writeback of inode time stamps during sync(2). 2) When inode is on b_dirty_time list and writeback_single_inode() races with __mark_inode_dirty() like: writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES) inode->i_state |= I_SYNC __writeback_single_inode() inode->i_state |= I_DIRTY_PAGES; if (inode->i_state & I_SYNC) bail if (!(inode->i_state & I_DIRTY_ALL)) - not true so nothing done We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus standard background writeback will not writeback this inode leading to possible dirty throttling stalls etc. (thanks to Martijn Coenen for this analysis). Fix these problems by tracking whether inode is queued in b_io or b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we know flush worker has queued inode and we should not touch i_io_list. On the other hand we also know that once flush worker is done with the inode it will requeue the inode to appropriate dirty list. When I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode to appropriate dirty list. Reported-by: Martijn Coenen <maco@android.com> Reviewed-by: Martijn Coenen <maco@android.com> Tested-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2020-06-15writeback: Protect inode->i_io_list with inode->i_lockJan Kara1-5/+17
Currently, operations on inode->i_io_list are protected by wb->list_lock. In the following patches we'll need to maintain consistency between inode->i_state and inode->i_io_list so change the code so that inode->i_lock protects also all inode's i_io_list handling. Reviewed-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: stable@vger.kernel.org # Prerequisite for "writeback: Avoid skipping inode writeback" Signed-off-by: Jan Kara <jack@suse.cz>
2020-06-06Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "A lot of bug fixes and cleanups for ext4, including: - Fix performance problems found in dioread_nolock now that it is the default, caused by transaction leaks. - Clean up fiemap handling in ext4 - Clean up and refactor multiple block allocator (mballoc) code - Fix a problem with mballoc with a smaller file systems running out of blocks because they couldn't properly use blocks that had been reserved by inode preallocation. - Fixed a race in ext4_sync_parent() versus rename() - Simplify the error handling in the extent manipulation code - Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers. - Avoid passing an error pointer to brelse in ext4_xattr_set() - Fix race which could result to freeing an inode on the dirty last in data=journal mode. - Fix refcount handling if ext4_iget() fails - Fix a crash in generic/019 caused by a corrupted extent node" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits) ext4: avoid unnecessary transaction starts during writeback ext4: don't block for O_DIRECT if IOCB_NOWAIT is set ext4: remove the access_ok() check in ext4_ioctl_get_es_cache fs: remove the access_ok() check in ioctl_fiemap fs: handle FIEMAP_FLAG_SYNC in fiemap_prep fs: move fiemap range validation into the file systems instances iomap: fix the iomap_fiemap prototype fs: move the fiemap definitions out of fs.h fs: mark __generic_block_fiemap static ext4: remove the call to fiemap_check_flags in ext4_fiemap ext4: split _ext4_fiemap ext4: fix fiemap size checks for bitmap files ext4: fix EXT4_MAX_LOGICAL_BLOCK macro add comment for ext4_dir_entry_2 file_type member jbd2: avoid leaking transaction credits when unreserving handle ext4: drop ext4_journal_free_reserved() ext4: mballoc: use lock for checking free blocks while retrying ext4: mballoc: refactor ext4_mb_good_group() ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling ext4: mballoc: refactor ext4_mb_discard_preallocations() ...
2020-06-04writeback: Export inode_io_list_del()Jan Kara1-0/+1
Ext4 needs to remove inode from writeback lists after it is out of visibility of its journalling machinery (which can still dirty the inode). Export inode_io_list_del() for it. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200421085445.5731-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
2020-06-02mm/writeback: discard NR_UNSTABLE_NFS, use NR_WRITEBACK insteadNeilBrown1-1/+0
After an NFS page has been written it is considered "unstable" until a COMMIT request succeeds. If the COMMIT fails, the page will be re-written. These "unstable" pages are currently accounted as "reclaimable", either in WB_RECLAIMABLE, or in NR_UNSTABLE_NFS which is included in a 'reclaimable' count. This might have made sense when sending the COMMIT required a separate action by the VFS/MM (e.g. releasepage() used to send a COMMIT). However now that all writes generated by ->writepages() will automatically be followed by a COMMIT (since commit 919e3bd9a875 ("NFS: Ensure we commit after writeback is complete")) it makes more sense to treat them as writeback pages. So this patch removes NR_UNSTABLE_NFS and accounts unstable pages in NR_WRITEBACK and WB_WRITEBACK. A particular effect of this change is that when wb_check_background_flush() calls wb_over_bg_threshold(), the latter will report 'true' a lot less often as the 'unstable' pages are no longer considered 'dirty' (as there is nothing that writeback can do about them anyway). Currently wb_check_background_flush() will trigger writeback to NFS even when there are relatively few dirty pages (if there are lots of unstable pages), this can result in small writes going to the server (10s of Kilobytes rather than a Megabyte) which hurts throughput. With this patch, there are fewer writes which are each larger on average. Where the NR_UNSTABLE_NFS count was included in statistics virtual-files, the entry is retained, but the value is hard-coded as zero. static trace points and warning printks which mentioned this counter no longer report it. [akpm@linux-foundation.org: re-layout comment] [akpm@linux-foundation.org: fix printk warning] Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com> Acked-by: Michal Hocko <mhocko@suse.com> [mm] Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Link: http://lkml.kernel.org/r/87d06j7gqa.fsf@notabene.neil.brown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-10bdi: remove the name field in struct backing_dev_infoChristoph Hellwig1-1/+1
The name is only printed for a not registered bdi in writeback. Use the device name there as is more useful anyway for the unlike case that the warning triggers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-31memcg: fix a crash in wb_workfn when a device disappearsTheodore Ts'o1-1/+1
Without memcg, there is a one-to-one mapping between the bdi and bdi_writeback structures. In this world, things are fairly straightforward; the first thing bdi_unregister() does is to shutdown the bdi_writeback structure (or wb), and part of that writeback ensures that no other work queued against the wb, and that the wb is fully drained. With memcg, however, there is a one-to-many relationship between the bdi and bdi_writeback structures; that is, there are multiple wb objects which can all point to a single bdi. There is a refcount which prevents the bdi object from being released (and hence, unregistered). So in theory, the bdi_unregister() *should* only get called once its refcount goes to zero (bdi_put will drop the refcount, and when it is zero, release_bdi gets called, which calls bdi_unregister). Unfortunately, del_gendisk() in block/gen_hd.c never got the memo about the Brave New memcg World, and calls bdi_unregister directly. It does this without informing the file system, or the memcg code, or anything else. This causes the root wb associated with the bdi to be unregistered, but none of the memcg-specific wb's are shutdown. So when one of these wb's are woken up to do delayed work, they try to dereference their wb->bdi->dev to fetch the device name, but unfortunately bdi->dev is now NULL, thanks to the bdi_unregister() called by del_gendisk(). As a result, *boom*. Fortunately, it looks like the rest of the writeback path is perfectly happy with bdi->dev and bdi->owner being NULL, so the simplest fix is to create a bdi_dev_name() function which can handle bdi->dev being NULL. This also allows us to bulletproof the writeback tracepoints to prevent them from dereferencing a NULL pointer and crashing the kernel if one is tracing with memcg's enabled, and an iSCSI device dies or a USB storage stick is pulled. The most common way of triggering this will be hotremoval of a device while writeback with memcg enabled is going on. It was triggering several times a day in a heavily loaded production environment. Google Bug Id: 145475544 Link: https://lore.kernel.org/r/20191227194829.150110-1-tytso@mit.edu Link: http://lkml.kernel.org/r/20191228005211.163952-1-tytso@mit.edu Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <clm@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-08cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is deadTejun Heo1-3/+6
cgroup writeback tries to refresh the associated wb immediately if the current wb is dead. This is to avoid keeping issuing IOs on the stale wb after memcg - blkcg association has changed (ie. when blkcg got disabled / enabled higher up in the hierarchy). Unfortunately, the logic gets triggered spuriously on inodes which are associated with dead cgroups. When the logic is triggered on dead cgroups, the attempt fails only after doing quite a bit of work allocating and initializing a new wb. While c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping has no dirty pages") alleviated the issue significantly as it now only triggers when the inode has dirty pages. However, the condition can still be triggered before the inode is switched to a different cgroup and the logic simply doesn't make sense. Skip the immediate switching if the associated memcg is dying. This is a simplified version of the following two patches: * https://lore.kernel.org/linux-mm/20190513183053.GA73423@dennisz-mbp/ * http://lkml.kernel.org/r/156355839560.2063.5265687291430814589.stgit@buzz Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks") Acked-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-15fs/fs-writeback.c: fix kernel-doc warningRandy Dunlap1-1/+1
Fix kernel-doc warning in fs/fs-writeback.c: fs/fs-writeback.c:913: warning: Excess function parameter 'nr_pages' description in 'cgroup_writeback_by_id' Link: http://lkml.kernel.org/r/756645ac-0ce8-d47e-d30a-04d9e4923a4f@infradead.org Fixes: d62241c7a406 ("writeback, memcg: Implement cgroup_writeback_by_id()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-08writeback: fix use-after-free in finish_writeback_work()Tejun Heo1-2/+7
finish_writeback_work() reads @done->waitq after decrementing @done->cnt. However, once @done->cnt reaches zero, @done may be freed (from stack) at any moment and @done->waitq can contain something unrelated by the time finish_writeback_work() tries to read it. This led to the following crash. "BUG: kernel NULL pointer dereference, address: 0000000000000002" #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC CPU: 40 PID: 555153 Comm: kworker/u98:50 Kdump: loaded Not tainted ... Workqueue: writeback wb_workfn (flush-btrfs-1) RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30 Code: 48 89 d8 5b c3 e8 50 db 6b ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 fe ca 6b ff eb f2 66 90 RSP: 0018:ffffc90049b27d98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffff889fff407600 R11: ffff88ba9395d740 R12: 000000000000e300 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88bfdfa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000002 CR3: 0000000002409005 CR4: 00000000001606e0 Call Trace: __wake_up_common_lock+0x63/0xc0 wb_workfn+0xd2/0x3e0 process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 kthread+0x111/0x130 ret_from_fork+0x1f/0x30 Fix it by reading and caching @done->waitq before decrementing @done->cnt. Link: http://lkml.kernel.org/r/20190924010631.GH2233839@devbig004.ftw2.facebook.com Fixes: 5b9cce4c7eb069 ("writeback: Generalize and expose wb_completion") Signed-off-by: Tejun Heo <tj@kernel.org> Debugged-by: Chris Mason <clm@fb.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [5.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30writeback: add tracepoints for cgroup foreign writebacksTejun Heo1-0/+5
cgroup foreign inode handling has quite a bit of heuristics and internal states which sometimes makes it difficult to understand what's going on. Add tracepoints to improve visibility. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27writeback, memcg: Implement cgroup_writeback_by_id()Tejun Heo1-0/+83
Implement cgroup_writeback_by_id() which initiates cgroup writeback from bdi and memcg IDs. This will be used by memcg foreign inode flushing. v2: Use wb_get_lookup() instead of wb_get_create() to avoid creating spurious wbs. v3: Interpret 0 @nr as 1.25 * nr_dirty to implement best-effort flushing while avoding possible livelocks. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27writeback: Generalize and expose wb_completionTejun Heo1-33/+14
wb_completion is used to track writeback completions. We want to use it from memcg side for foreign inode flushes. This patch updates it to remember the target waitq instead of assuming bdi->wb_waitq and expose it outside of fs-writeback.c. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15writeback, cgroup: inode_switch_wbs() shouldn't give up on wb_switch_rwsem ↵Tejun Heo1-12/+5
trylock fail As inode wb switching may make sync(2) miss some inodes, they're synchronized using wb_switch_rwsem so that no wb switching happens while sync(2) is in progress. In addition to synchronizing the actual switching, the rwsem is also used to prevent queueing new switch attempts while sync(2) is in progress. This is to avoid queueing too many instances while the rwsem is held by sync(2). Unfortunately, this is too agressive and can block wb switching for a long time if sync(2) is frequent. The goal is avoiding expolding the number of scheduled switches, not avoiding scheduling anything. Let's use wb_switch_rwsem only for synchronizing the actual switching and sync(2) and use isw_nr_in_flight instead for limiting the maximum number of scheduled switches. The limit is set to 1024 which should be more than enough while still avoiding extreme situations. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15writeback, cgroup: Adjust WB_FRN_TIME_CUT_DIV to accelerate foreign inode ↵Tejun Heo1-2/+20
switching WB_FRN_TIME_CUT_DIV is used to tell the foreign inode detection logic to ignore short writeback rounds to prevent getting confused by a burst of short writebacks. The parameter is currently 2 meaning that anything smaller than half of the running average writback duration will be ignored. This is unnecessarily aggressive. The detection logic uses 16 history slots and is already reasonably protected against some short bursts confusing it and the current parameter can lead to tens of seconds of missed detection depending on the writeback pattern. Let's change the parameter to 8, so that it only ignores writeback with are smaller than 12.5% of the current running average. v2: Add comment explaining what's going on with the foreign detection parameters. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10blkcg, writeback: Add wbc->no_cgroup_ownerTejun Heo1-1/+1
When writeback IOs are bounced through async layers, the IOs should only be accounted against the wbc from the original bdi writeback to avoid confusing cgroup inode ownership arbitration. Add wbc->no_cgroup_owner to allow disabling wbc cgroup owner accounting. This will be used make btrfs compression work well with cgroup IO control. v2: Renamed from no_wbc_acct to no_cgroup_owner and added comment as per Jan. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()Tejun Heo1-4/+4
wbc_account_io() does a very specific job - try to see which cgroup is actually dirtying an inode and transfer its ownership to the majority dirtier if needed. The name is too generic and confusing. Let's rename it to something more specific. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10cgroup, blkcg: Prepare some symbols for module and !CONFIG_CGROUP usagesTejun Heo1-0/+3
btrfs is going to use css_put() and wbc helpers to improve cgroup writeback support. Add dummy css_get() definition and export wbc helpers to prepare for module and !CONFIG_CGROUP builds. Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15blkcg, writeback: dead memcgs shouldn't contribute to writeback ownership ↵Tejun Heo1-1/+7
arbitration wbc_account_io() collects information on cgroup ownership of writeback pages to determine which cgroup should own the inode. Pages can stay associated with dead memcgs but we want to avoid attributing IOs to dead blkcgs as much as possible as the association is likely to be stale. However, currently, pages associated with dead memcgs contribute to the accounting delaying and/or confusing the arbitration. Fix it by ignoring pages associated with dead memcgs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 23:49:53 +0300