summaryrefslogtreecommitdiff
path: root/fs/ext4
AgeCommit message (Collapse)AuthorFilesLines
2008-11-07ext4: add checksum calculation when clearing UNINIT flag in ext4_new_inodeFrederic Bohe1-0/+2
When initializing an uninitialized block group in ext4_new_inode(), its block group checksum must be re-calculated. This fixes a race when several threads try to allocate a new inode in an UNINIT'd group. There is some question whether we need to be initializing the block bitmap in ext4_new_inode() at all, but for now, if we are going to init the block group, let's eliminate the race. Signed-off-by: Frederic Bohe <frederic.bohe@bull.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-07ext4: Mark the buffer_heads as dirty and uptodate after prepare_writeAneesh Kumar K.V1-0/+2
We need to make sure we mark the buffer_heads as dirty and uptodate so that block_write_full_page write them correctly. This fixes mmap corruptions that can occur in low memory situations. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-07ext4: calculate journal credits correctlyTheodore Ts'o1-2/+3
This fixes a 2.6.27 regression which was introduced in commit a02908f1. We weren't passing the chunk parameter down to the two subections, ext4_indirect_trans_blocks() and ext4_ext_index_trans_blocks(), with the result that massively overestimate the amount of credits needed by ext4_da_writepages, especially in the non-extents case. This causes failures especially on /boot partitions, which tend to be small and non-extent using since GRUB doesn't handle extents. This patch fixes the bug reported by Joseph Fannin at: http://bugzilla.kernel.org/show_bug.cgi?id=11964 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-04ext4: wait on all pending commits in ext4_sync_fs()Theodore Ts'o1-11/+8
In ext4_sync_fs, we only wait for a commit to finish if we started it, but there may be one already in progress which will not be synced. In the case of a data=ordered umount with pending long symlinks which are delayed due to a long list of other I/O on the backing block device, this causes the buffer associated with the long symlinks to not be moved to the inode dirty list in the second phase of fsync_super. Then, before they can be dirtied again, kjournald exits, seeing the UMOUNT flag and the dirty pages are never written to the backing block device, causing long symlink corruption and exposing new or previously freed block data to userspace. To ensure all commits are synced, we flush all journal commits now when sync_fs'ing ext4. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org>
2008-11-04ext4: Convert to host order before using the values.Aneesh Kumar K.V1-3/+2
Use le16_to_cpu to read the s_reserved_gdt_blocks values from super block. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-04ext4: fix missing ext4_unlock_group in error pathAneesh Kumar K.V1-0/+1
If we try to free a block which is already freed, the code was returning without first unlocking the group. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-28delay capable() check in ext4_has_free_blocks()Eric Sandeen1-12/+14
As reported by Eric Paris, the capable() check in ext4_has_free_blocks() sometimes causes SELinux denials. We can rearrange the logic so that we only try to use the root-reserved blocks when necessary, and even then we can move the capable() test to last, to avoid the check most of the time. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-28merge ext4_claim_free_blocks & ext4_has_free_blocksEric Sandeen2-43/+17
Mingming pointed out that ext4_claim_free_blocks & ext4_has_free_blocks are largely cut & pasted; they can be collapsed/merged as follows. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-28ext4: fix a bug accessing freed memory in ext4_abortHidehiro Kawai1-4/+7
Vegard Nossum reported a bug which accesses freed memory (found via kmemcheck). When journal has been aborted, ext4_put_super() calls ext4_abort() after freeing the journal_t object, and then ext4_abort() accesses it. This patch fix it. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-26ext4: Fix duplicate entries returned from getdents() system callTheodore Ts'o1-12/+8
Fix a regression caused by commit d0156417, "ext4: fix ext4_dx_readdir hash collision handling", where deleting files in a large directory (requiring more than one getdents system call), results in some filenames being returned twice. This was caused by a failure to update info->curr_hash and info->curr_minor_hash, so that if the directory had gotten modified since the last getdents() system call (as would be the case if the user is running "rm -r" or "git clean"), a directory entry would get returned twice to the userspace. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> This patch fixes the bug reported by Markus Trippelsdorf at: http://bugzilla.kernel.org/show_bug.cgi?id=11844 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
2008-10-23ext4: remove unused variable in ext4_get_parentChristoph Hellwig1-1/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> [ All users removed in "switch all filesystems over to d_obtain_alias", aka commit 440037287c5ebb07033ab927ca16bb68c291d309 ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdevLinus Torvalds1-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits) [PATCH] kill the rest of struct file propagation in block ioctls [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET [PATCH] get rid of blkdev_locked_ioctl() [PATCH] get rid of blkdev_driver_ioctl() [PATCH] sanitize blkdev_get() and friends [PATCH] remember mode of reiserfs journal [PATCH] propagate mode through swsusp_close() [PATCH] propagate mode through open_bdev_excl/close_bdev_excl [PATCH] pass fmode_t to blkdev_put() [PATCH] kill the unused bsize on the send side of /dev/loop [PATCH] trim file propagation in block/compat_ioctl.c [PATCH] end of methods switch: remove the old ones [PATCH] switch sr [PATCH] switch sd [PATCH] switch ide-scsi [PATCH] switch tape_block [PATCH] switch dcssblk [PATCH] switch dasd [PATCH] switch mtd_blkdevs [PATCH] switch mmc ...
2008-10-23[PATCH] switch all filesystems over to d_obtain_aliasChristoph Hellwig1-10/+1
Switch all users of d_alloc_anon to d_obtain_alias. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-23[PATCH] switch quota_on-related stuff to kern_path()Al Viro1-12/+12
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] pass fmode_t to blkdev_put()Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-20fs/Kconfig: move ext2, ext3, ext4, JBD, JBD2 outAlexey Dobriyan1-0/+79
Use fs/*/Kconfig more, which is good because everything related to one filesystem is in one place and fs/Kconfig is quite fat. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-17ext4: Remove automatic enabling of the HUGE_FILE feature flagTheodore Ts'o2-88/+21
If the HUGE_FILE feature flag is not set, don't allow the creation of large files, instead of automatically enabling the feature flag. Recent versions of mke2fs will set the HUGE_FILE flag automatically anyway for ext4 filesystems. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-17ext4: Replace hackish ext4_mb_poll_new_transaction with commit callbackTheodore Ts'o3-75/+16
The multiblock allocator needs to be able to release blocks (and issue a blkdev discard request) when the transaction which freed those blocks is committed. Previously this was done via a polling mechanism when blocks are allocated or freed. A much better way of doing things is to create a jbd2 callback function and attaching the list of blocks to be freed directly to the transaction structure. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-17ext4: Remove unused mount options: nomballoc, mballoc, nocheckTheodore Ts'o2-10/+2
These mount options don't actually do anything any more, so remove them. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-17ext4: Remove compile warnings when building w/o CONFIG_PROC_FSManish Katiyar1-1/+6
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-17ext4: Add missing newlines to printk messagesEric Sesterhenn1-3/+3
There are some newlines missing in ext4_check_descriptors, which cause the printk level to be printed out when the next printk call is made: [ 778.847265] EXT4-fs: ext4_check_descriptors: Block bitmap for group 0 not in group (block 1509949442)!<3>EXT4-fs: group descriptors corrupted! [ 802.646630] EXT4-fs: ext4_check_descriptors: Inode bitmap for group 0 not in group (block 9043971)!<3>EXT4-fs: group descriptors corrupted! Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-16ext4: Fix file fragmentation during large file write.Aneesh Kumar K.V1-34/+57
The range_cyclic writeback mode uses the address_space writeback_index as the start index for writeback. With delayed allocation we were updating writeback_index wrongly resulting in highly fragmented file. This patch reduces the number of extents reduced from 4000 to 27 for a 3GB file. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-14ext4: Use tag dirty lookup during mpage_da_submit_ioAneesh Kumar K.V1-17/+13
This enables us to drop the range_cont writeback mode use from ext4_da_writepages. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-10-16ext4: let the block device know when unused blocks can be discardedTheodore Ts'o2-0/+9
Let the block device know when unused blocks can be discarded, using the new sb_issue_discard() interface. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-11ext4: Don't reuse released data blocks until transaction commitsAneesh Kumar K.V1-2/+10
We need to make sure we don't reuse the data blocks released during the transaction untill the transaction commits. We force this mode only for ordered and journalled mode. Writeback mode already don't provided data consistency. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-16ext4: Use an rbtree for tracking blocks freed during transaction.Aneesh Kumar K.V2-77/+133
With this patch we track the block freed during a transaction using red-black tree. We also make sure contiguous blocks freed are collected in one node in the tree. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-11ext4: Do mballoc init before doing filesystem recoveryAneesh Kumar K.V1-15/+15
During filesystem recovery we may be doing a truncate which expects some of the mballoc data structures to be initialized. So do ext4_mb_init before recovery. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-13ext4: Free ext4_prealloc_space using kmem_cache_freeAneesh Kumar K.V1-1/+1
We should use kmem_cache_free to free memory allocated via kmem_cache_alloc Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-13vfs: Use const for kernel parser tableSteven Whitehouse1-1/+1
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13ext4: fix build failure without procfsAlexander Beregalov1-0/+2
fs/ext4/super.c: In function 'ext4_fill_super': fs/ext4/super.c:2226: error: 'ext4_ui_proc_fops' undeclared (first use in this function) fs/ext4/super.c:2226: error: (Each undeclared identifier is reported only once fs/ext4/super.c:2226: error: for each function it appears in.) Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-11ext4: add an option to control error handling on file dataHidehiro Kawai2-0/+18
If the journal doesn't abort when it gets an IO error in file data blocks, the file data corruption will spread silently. Because most of applications and commands do buffered writes without fsync(), they don't notice the IO error. It's scary for mission critical systems. On the other hand, if the journal aborts whenever it gets an IO error in file data blocks, the system will easily become inoperable. So this patch introduces a filesystem option to determine whether it aborts the journal or just call printk() when it gets an IO error in file data. If you mount an ext4 fs with data_err=abort option, it aborts on file data write error. If you mount it with data_err=ignore, it doesn't abort, just call printk(). data_err=ignore is the default. Here is the corresponding patch of the ext3 version: http://kerneltrap.org/mailarchive/linux-kernel/2008/9/9/3239374 Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-11ext4: add checks for errors from jbd2Hidehiro Kawai2-8/+27
If the journal has aborted due to a checkpointing failure, we have to keep the contents of the journal space. Otherwise, the filesystem will lose uncheckpointed metadata completely and become inconsistent. To avoid this, we need to keep needs_recovery flag if checkpoint has failed. With this patch, ext4_put_super() detects a checkpointing failure from the return value of journal_destroy(), then it invokes ext4_abort() to make the filesystem read only and keep needs_recovery flag. Errors from jbd2_journal_flush() are also handled by this patch in some places. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-11ext4: Rename ext4dev to ext4Theodore Ts'o10-46/+67
The ext4 filesystem is getting stable enough that it's time to drop the "dev" prefix. Also remove the requirement for the TEST_FILESYS flag. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-07ext4: Avoid double dirtying of super block in ext4_put_super()Andi Kleen1-2/+0
While reading code I noticed that ext4_put_super() dirties the superblock bh twice. It is always done in ext4_commit_super() too. Remove the redundant dirty operation. Should be a nop semantically. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-10-07Hook ext4 to the vfs fiemap interface.Eric Sandeen5-2/+271
ext4_ext_walk_space() was reinstated to be used for iterating over file extents with a callback; it is used by the ext4 fiemap implementation. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-ext4@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org
2008-10-09ext4: fix xattr deadlockKalpak Shah1-0/+6
ext4_xattr_set_handle() eventually ends up calling ext4_mark_inode_dirty() which tries to expand the inode by shifting the EAs. This leads to the xattr_sem being downed again and leading to a deadlock. This patch makes sure that if ext4_xattr_set_handle() is in the call-chain, ext4_mark_inode_dirty() will not expand the inode. Signed-off-by: Kalpak Shah <kalpak.shah@sun.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-06ext4: Add debugging markers that can be used by systemtapTheodore Ts'o2-0/+7
This debugging markers are designed to debug problems such as the random filesystem latency problems reported by Arjan. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10ext4: fix initialization of UNINIT bitmap blocksFrederic Bohe3-3/+9
This fixes a bug which caused on-line resizing of filesystems with a 1k blocksize to fail. The root cause of this bug was the fact that if an uninitalized bitmap block gets read in by userspace (which e2fsprogs does try to avoid, but can happen when the blocksize is less than the pagesize and an adjacent blocks is read into memory) ext4_read_block_bitmap() was erroneously depending on the buffer uptodate flag to decide whether it needed to initialize the bitmap block in memory --- i.e., to set the standard set of blocks in use by a block group (superblock, bitmaps, inode table, etc.). Essentially, ext4_read_block_bitmap() assumed it was the only routine that might try to read a block containing a block bitmap, which is simply not true. To fix this, ext4_read_block_bitmap() and ext4_read_inode_bitmap() must always initialize uninitialized bitmap blocks. Once a block or inode is allocated out of that bitmap, it will be marked as initialized in the block group descriptor, so in general this won't result any extra unnecessary work. Signed-off-by: Frederic Bohe <frederic.bohe@bull.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10ext4: Remove old legacy block allocatorTheodore Ts'o12-1528/+40
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10ext4: Use readahead when reading an inode from the inode tableTheodore Ts'o4-72/+92
With modern hard drives, reading 64k takes roughly the same time as reading a 4k block. So request readahead for adjacent inode table blocks to reduce the time it takes when iterating over directories (especially when doing this in htree sort order) in a cold cache case. With this patch, the time it takes to run "git status" on a kernel tree after flushing the caches via "echo 3 > /proc/sys/vm/drop_caches" is reduced by 21%. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-24ext4: Combine proc file handling into a single set of functionsTheodore Ts'o4-69/+70
Previously mballoc created a separate set of functions for each proc file. This combines the tunables into a single set of functions which gets used for all of the per-superblock proc files, saving approximately 2k of compiled object code. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-23ext4: move /proc setup and teardown out of mballoc.cTheodore Ts'o5-56/+42
...and into the core setup/teardown code in fs/ext4/super.c so that other parts of ext4 can define tuning parameters. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-22ext4: Don't use 'struct dentry' for internal lookupsTheodore Ts'o1-35/+33
This is a port of a patch from Linus which fixes a 200+ byte stack usage problem in ext4_get_parent(). It's more efficient to pass down only the actual parts of the dentry that matter: the parent inode and the name, instead of allocating a struct dentry on the stack. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-07ext4/jbd2: Avoid WARN() messages when failing to write to the superblockTheodore Ts'o1-1/+22
This fixes some very common warnings reported by kerneloops.org Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-13ext4: use percpu data structures for lg_prealloc_listEric Sandeen1-8/+5
lg_prealloc_list seems to cry out for a per-cpu data structure; on a large smp system I think this should be better. I've lightly tested this change on a 4-cpu system. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-14ext4: Renumber EXT4_IOC_MIGRATETheodore Ts'o1-3/+4
Pick an ioctl number for EXT4_IOC_MIGRATE that won't conflict with other ext4 ioctl's. Since there haven't been any major userspace users of this ioctl, we can afford to change this now, to avoid potential problems later. Also, reorder the ioctl numbers in ext4.h to avoid this sort of mistake in the future. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-09ext4: hook the ext3 migration interface to the EXT4_IOC_SETFLAGS ioctlAneesh Kumar K.V2-2/+17
This patch hooks the ext3 to ext4 migrate interface to EXT4_IOC_SETFLAGS ioctl. The userspace interface is via chattr +e. We only allow setting extent flags. Clearing extent flag (migrating from ext4 to ext3) is not supported. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-13ext4: elevate write count for migrate ioctlAneesh Kumar K.V3-12/+22
The migrate ioctl writes to the filsystem, so we need to elevate the write count. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08ext4: add missing unlock in ext4_check_descriptors() on error pathLi Zefan1-1/+3
If there group descriptors are corrupted we need unlock the block group lock before returning from the function; else we will oops when freeing a spinlock which is still being held. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-16jbd2: clean up how the journal device name is printedTheodore Ts'o1-9/+3
Calculate the journal device name once and stash it away in the journal_s structure. This avoids needing to call bdevname() everywhere and reduces stack usage by not needing to allocate an on-stack buffer. In addition, we eliminate the '/' that can appear in device names (e.g. "cciss/c0d0p9" --- see kernel bugzilla #11321) that can cause problems when creating proc directory names, and include the inode number to support ocfs2 which creates multiple journals with different inode numbers. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>