| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This new helper will be used in the fs_context mount option parsing
code. It log errors both in:
* the fs_context log queue for userspace to read
* kernel printk buffer (dmesg, old behaviour)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Emulated via server side copy and setsize for
SMB3 and later. In the future we could compound
this (and/or optionally use DUPLICATE_EXTENTS
if supported by the server).
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Emulated for SMB3 and later via server side copy
and setsize. Eventually this could be compounded.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Improves directory metadata caching
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
functions
Needed for the final patch in the directory caching series
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
and clear the timestamp when we receive a lease break.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Needed for subsequent patches in the directory caching
series.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
lifetime of the cache
We need to hold both a reference for the root/superblock as well as the directory that we
are caching. We need to drop these references before we call kill_anon_sb().
At this point, the root and the cached dentries are always the same but this will change
once we start caching other directories as well.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
completed mounting the share
And use this to only allow to take out a shared handle once the mount has completed and the
sb becomes available.
This will become important in follow up patches where we will start holding a reference to the
directory dentry for the shared handle during the lifetime of the handle.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
These functions will eventually be used to cache any directory, not just the root
so change the names.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move the check for the directory path into the open_shroot() function
but still fail for any non-root directories.
This is preparation for later when we will start using the cache also
for other directories than the root.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
instead of doing it in the callsites for open_shroot.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The cost is that we might need to flip '/' to '\\' in more than
just the prefix. Needs profiling, but I suspect that we won't
get slowdown on that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
build_path_from_dentry() open-codes dentry_path_raw(). The reason
we can't use dentry_path_raw() in there (and postprocess the
result as needed) is that the callers of build_path_from_dentry()
expect that the object to be freed on cleanup and the string to
be used are at the same address. That's painful, since the path
is naturally built end-to-beginning - we start at the leaf and
go through the ancestors, accumulating the pathname.
Life would be easier if we left the buffer allocation to callers.
It wouldn't be exact-sized buffer, but none of the callers keep
the result for long - it's always freed before the caller returns.
So there's no need to do exact-sized allocation; better use
__getname()/__putname(), same as we do for pathname arguments
of syscalls. What's more, there's no need to do allocation under
spinlocks, so GFP_ATOMIC is not needed.
Next patch will replace the open-coded dentry_path_raw() (in
build_path_from_dentry_optional_prefix()) with calling the real
thing. This patch only introduces wrappers for allocating/freeing
the buffers and switches to new calling conventions:
build_path_from_dentry(dentry, buf)
expects buf to be address of a page-sized object or NULL,
return value is a pathname built inside that buffer on success,
ERR_PTR(-ENOMEM) if buf is NULL and ERR_PTR(-ENAMETOOLONG) if
the pathname won't fit into page. Note that we don't need to
check for failure when allocating the buffer in the caller -
build_path_from_dentry() will do the right thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
... and adjust the callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
As it is, it takes const char * and, in some cases, stores it in
caller's variable that is plain char *. Fortunately, none of the
callers actually proceeded to modify the string via now-non-const
alias, but that's trouble waiting to happen.
It's easy to do properly, anyway...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
strndup(s, strlen(s)) is a highly unidiomatic way to spell strdup(s);
it's *NOT* safer in any way, since strlen() is just as sensitive to
NUL-termination as strdup() is.
strndup() is for situations when you need a copy of a known-sized
substring, not a magic security juju to drive the bad spirits away.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Protocol has been extended for additional compression headers.
See MS-SMB2 section 2.2.42
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
While reviewing a patch clarifying locks and locking hierarchy I
realized some locks were unused.
This commit removes old data and code that isn't actually used
anywhere, or hidden in ifdefs which cannot be enabled from the kernel
config.
* The uid/gid trees and associated locks are left-overs from when
uid/sid mapping had an extra caching layer on top of the keyring and
are now unused.
See commit faa65f07d21e ("cifs: simplify id_to_sid and sid_to_id mapping code")
from 2012.
* cifs_oplock_break_ops is a left-over from when slow_work was remplaced
by regular workqueue and is now unused.
See commit 9b646972467f ("cifs: use workqueue instead of slow-work")
from 2010.
* CIFSSMBSetAttrLegacy is SMB1 cruft dealing with some legacy
NT4/Win9x behaviour.
* Remove CONFIG_CIFS_DNOTIFY_EXPERIMENTAL left-overs. This was already
partially removed in 392e1c5dc9cc ("cifs: rename and clarify CIFS_ASYNC_OP and CIFS_NO_RESP")
from 2019. Kill it completely.
* Another candidate that was considered but spared is
CONFIG_CIFS_NFSD_EXPORT which has an empty implementation and cannot
be enabled by a config option (although it is listed but disabled with
"BROKEN" as a dep). It's unclear whether this could even function
today in its current form but it has it's own .c file and Kconfig
entry which is a bit more involved to remove and might make a come
back?
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warning:
CC [M] fs/cifs/cifssmb.o
fs/cifs/cifssmb.c: In function ‘CIFSFindNext’:
fs/cifs/cifssmb.c:4636:23: warning: array subscript 1 is above array bounds of ‘char[1]’ [-Warray-bounds]
4636 | pSMB->ResumeFileName[name_len+1] = 0;
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
struct cifs_writedata is declared twice.
One is declared at 209th line.
And struct cifs_writedata is defined blew.
The declaration hear is not needed. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This commit doesn't change the logic of SWN.
Add dummy implementation of SWN functions when SWN is disabled instead
of using ifdef sections.
The dummy functions get optimized out, this leads to clearer code and
compile time type-checking regardless of config options with no
runtime penalty.
Leave the simple ifdefs section as-is.
A single bitfield (bool foo:1) on its own will use up one int. Move
tcon->use_witness out of ifdefs with the other tcon bitfields.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
[MS-SMB2] protocol specification was recently updated to include
new flags, new negotiate context and some minor changes to fields.
Update smb2pdu.h structure definitions to match the newest version
of the protocol specification. Updates to the compression context
values will be in a followon patch.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A few of the semaphores had been removed, and one additional one
needed to be noted in the comments.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix the following gcc warning:
fs/cifs/cifsacl.c:1097:8: warning: variable ‘nmode’ set but not used
[-Wunused-but-set-variable].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
secuirty -> security
Signed-off-by: jack1.li_cp <liliu1@yulong.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Commit 653a5efb849a ("cifs: update super_operations to show_devname")
introduced the display of devname for cifs mounts. However, when mounting
a share which has a whitespace in the name, that exact share name is also
displayed in mountinfo. Make sure that all whitespace is escaped.
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
CC: <stable@vger.kernel.org> # 5.11+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
struct cifs_readdata is declared twice. One is declared
at 208th line.
And struct cifs_readdata is defined blew.
The declaration here is not needed. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
On cifs_reconnect, make sure that DNS resolution happens again.
It could be the cause of connection to go dead in the first place.
This also contains the fix for a build issue identified by Intel bot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: <stable@vger.kernel.org> # 5.11+
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1. The debug message which is printed for
these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".
CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
00000000: 424d53fe 00000040 00000000 00000012 .SMB@...........
00000010: 00000001 00000000 ffffffff ffffffff ................
00000020: 00000000 00000000 00000000 00000000 ................
00000030: 00000000 00000000 00000000 00000000 ................
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
RHBZ: 1933527
Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.
Found testing xfstest 495 with modefromsid mount option
Fixes: f5065508897a ("cifs: Retain old ACEs when converting between mode bits and ACL")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For AES256 encryption (GCM and CCM), we need to adjust the size of a few
fields to 32 bytes instead of 16 to accommodate the larger keys.
Also, the L value supplied to the key generator needs to be changed from
to 256 when these algorithms are used.
Keeping the ioctl struct for dumping keys of the same size for now.
Will send out a different patch for that one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Applications that create and extend and write to a file do not
expect to see 0 allocation size. When file is extended,
set its allocation size to a plausible value until we have a
chance to query the server for it. When the file is cached
this will prevent showing an impossible number of allocated
blocks (like 0). This fixes e.g. xfstests 614 which does
1) create a file and set its size to 64K
2) mmap write 64K to the file
3) stat -c %b for the file (to query the number of allocated blocks)
It was failing because we returned 0 blocks. Even though we would
return the correct cached file size, we returned an impossible
allocation size.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
If CONFIG_CIFS_ROOT is not set, rootfs mount option is invalid
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org> # v5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A typo is found out by codespell tool in 251th lines of cifs_swn.c:
$ codespell ./fs/cifs/
./cifs_swn.c:251: funciton ==> function
Fix a typo found by codespell.
Signed-off-by: Liu xuzhi <liu.xuzhi@zte.com.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb311_update_preauth_hash() uses the shash in server->secmech without
appropriate locking, and this can lead to sessions corrupting each
other's preauth hashes.
The following script can easily trigger the problem:
#!/bin/sh -e
NMOUNTS=10
for i in $(seq $NMOUNTS);
mkdir -p /tmp/mnt$i
umount /tmp/mnt$i 2>/dev/null || :
done
while :; do
for i in $(seq $NMOUNTS); do
mount -t cifs //192.168.0.1/test /tmp/mnt$i -o ... &
done
wait
for i in $(seq $NMOUNTS); do
umount /tmp/mnt$i
done
done
Usually within seconds this leads to one or more of the mounts failing
with the following errors, and a "Bad SMB2 signature for message" is
seen in the server logs:
CIFS: VFS: \\192.168.0.1 failed to connect to IPC (rc=-13)
CIFS: VFS: cifs_mount failed w/return code = -13
Fix it by holding the server mutex just like in the other places where
the shashes are used.
Fixes: 8bd68c6e47abff34e4 ("CIFS: implement v3.11 preauth integrity")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
After the fix for retaining externally set ACEs with cifsacl and
modefromsid,idsfromsid, there was an issue in populating the
inherited ACEs after setting the ACEs introduced by these two modes.
Fixed this by updating the ACE pointer again after the call to
populate_new_aces.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
... instead of trying to do that in the callers (and missing some,
at that)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
if we have mkdir request reported successful *and* simulating lookup
gets us a non-directory (which is possible if another client has
managed to get rmdir and create in between), the sane action is not
to mangle ->i_mode of non-directory inode to S_IFDIR | mode, it's
"report success and return with dentry negative unhashed" - that
way the next lookup will do the right thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If the file had existed before we'd called ->atomic_open() (without
O_EXCL, that is), we have no more business setting ->i_mode than
we would setting ->i_uid or ->i_gid. We also have no business
doing either if another client has managed to get unlink+mkdir
between ->open() and cifs_inode_get_info().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In case of interrupted syscalls, prevent sending CLOSE commands for
compound CREATE+CLOSE requests by introducing an
CIFS_CP_CREATE_CLOSE_OP flag to indicate lower layers that it should
not send a CLOSE command to the MIDs corresponding the compound
CREATE+CLOSE request.
A simple reproducer:
#!/bin/bash
mount //server/share /mnt -o username=foo,password=***
tc qdisc add dev eth0 root netem delay 450ms
stat -f /mnt &>/dev/null & pid=$!
sleep 0.01
kill $pid
tc qdisc del dev eth0 root
umount /mnt
Before patch:
...
6 0.256893470 192.168.122.2 → 192.168.122.15 SMB2 402 Create Request File: ;GetInfo Request FS_INFO/FileFsFullSizeInformation;Close Request
7 0.257144491 192.168.122.15 → 192.168.122.2 SMB2 498 Create Response File: ;GetInfo Response;Close Response
9 0.260798209 192.168.122.2 → 192.168.122.15 SMB2 146 Close Request File:
10 0.260841089 192.168.122.15 → 192.168.122.2 SMB2 130 Close Response, Error: STATUS_FILE_CLOSED
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In cifs_statfs(), if server->ops->queryfs is not NULL, then we should
use its return value rather than always returning 0. Instead, use rc
variable as it is properly set to 0 in case there is no
server->ops->queryfs.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A customer has reported that their dmesg were being flooded by
CIFS: VFS: \\server Cancelling wait for mid xxx cmd: a
CIFS: VFS: \\server Cancelling wait for mid yyy cmd: b
CIFS: VFS: \\server Cancelling wait for mid zzz cmd: c
because some processes that were performing statfs(2) on the share had
been interrupted due to their automount setup when certain users
logged in and out.
Change it to FYI as they should be mostly informative rather than
error messages.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The MIDs are mostly printed as decimal, so let's make it consistent.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
inode_wrong_type(inode, mode) returns true if setting inode->i_mode
to given value would've changed the inode type. We have enough of
those checks open-coded to make a helper worthwhile.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When doing a large read or write workload we only
very gradually increase the number of credits
which can cause problems with parallelizing large i/o
(I/O ramps up more slowly than it should for large
read/write workloads) especially with multichannel
when the number of credits on the secondary channels
starts out low (e.g. less than about 130) or when
recovering after server throttled back the number
of credit.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
