summaryrefslogtreecommitdiff
path: root/fs/btrfs
AgeCommit message (Collapse)AuthorFilesLines
2022-05-24Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits) arm64/sysreg: Generate definitions for FAR_ELx arm64/sysreg: Generate definitions for DACR32_EL2 arm64/sysreg: Generate definitions for CSSELR_EL1 arm64/sysreg: Generate definitions for CPACR_ELx arm64/sysreg: Generate definitions for CONTEXTIDR_ELx arm64/sysreg: Generate definitions for CLIDR_EL1 arm64/sve: Move sve_free() into SVE code section arm64: Kconfig.platforms: Add comments arm64: Kconfig: Fix indentation and add comments arm64: mm: avoid writable executable mappings in kexec/hibernate code arm64: lds: move special code sections out of kernel exec segment arm64/hugetlb: Implement arm64 specific huge_ptep_get() arm64/hugetlb: Use ptep_get() to get the pte value of a huge page arm64: kdump: Do not allocate crash low memory if not needed arm64/sve: Generate ZCR definitions arm64/sme: Generate defintions for SVCR arm64/sme: Generate SMPRI_EL1 definitions arm64/sme: Automatically generate SMPRIMAP_EL2 definitions arm64/sme: Automatically generate SMIDR_EL1 defines arm64/sme: Automatically generate defines for SMCR ...
2022-05-23Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds6-34/+19
Pull block updates from Jens Axboe: "Here are the core block changes for 5.19. This contains: - blk-throttle accounting fix (Laibin) - Series removing redundant assignments (Michal) - Expose bio cache via the bio_set, so that DM can use it (Mike) - Finish off the bio allocation interface cleanups by dealing with the weirdest member of the family. bio_kmalloc combines a kmalloc for the bio and bio_vecs with a hidden bio_init call and magic cleanup semantics (Christoph) - Clean up the block layer API so that APIs consumed by file systems are (almost) only struct block_device based, so that file systems don't have to poke into block layer internals like the request_queue (Christoph) - Clean up the blk_execute_rq* API (Christoph) - Clean up various lose end in the blk-cgroup code to make it easier to follow in preparation of reworking the blkcg assignment for bios (Christoph) - Fix use-after-free issues in BFQ when processes with merged queues get moved to different cgroups (Jan) - BFQ fixes (Jan) - Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming, Wolfgang, me)" * tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits) blk-mq: fix typo in comment bfq: Remove bfq_requeue_request_body() bfq: Remove superfluous conversion from RQ_BIC() bfq: Allow current waker to defend against a tentative one bfq: Relax waker detection for shared queues blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE() blk-throttle: Set BIO_THROTTLED when bio has been throttled blk-cgroup: Remove unnecessary rcu_read_lock/unlock() blk-cgroup: always terminate io.stat lines block, bfq: make bfq_has_work() more accurate block, bfq: protect 'bfqd->queued' by 'bfqd->lock' block: cleanup the VM accounting in submit_bio block: Fix the bio.bi_opf comment block: reorder the REQ_ flags blk-iocost: combine local_stat and desc_stat to stat block: improve the error message from bio_check_eod block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone block: remove superfluous calls to blkcg_bio_issue_init kthread: unexport kthread_blkcg blk-cgroup: cleanup blkcg_maybe_throttle_current ...
2022-05-07Merge tag 'for-5.18-rc5-tag' of ↵Linus Torvalds4-34/+53
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Regression fixes in zone activation: - move a loop invariant out of the loop to avoid checking space status - properly handle unlimited activation Other fixes: - for subpage, force the free space v2 mount to avoid a warning and make it easy to switch a filesystem on different page size systems - export sysfs status of exclusive operation 'balance paused', so the user space tools can recognize it and allow adding a device with paused balance - fix assertion failure when logging directory key range item" * tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: sysfs: export the balance paused state of exclusive operation btrfs: fix assertion failure when logging directory key range item btrfs: zoned: activate block group properly on unlimited active zone device btrfs: zoned: move non-changing condition check out of the loop btrfs: force v2 space cache usage for subpage mount
2022-05-05btrfs: sysfs: export the balance paused state of exclusive operationDavid Sterba1-0/+3
The new state allowing device addition with paused balance is not exported to user space so it can't recognize it and actually start the operation. Fixes: efc0e69c2fea ("btrfs: introduce exclusive operation BALANCE_PAUSED state") CC: stable@vger.kernel.org # 5.17 Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-05btrfs: fix assertion failure when logging directory key range itemFilipe Manana1-14/+25
When inserting a key range item (BTRFS_DIR_LOG_INDEX_KEY) while logging a directory, we don't expect the insertion to fail with -EEXIST, because we are holding the directory's log_mutex and we have dropped all existing BTRFS_DIR_LOG_INDEX_KEY keys from the log tree before we started to log the directory. However it's possible that during the logging we attempt to insert the same BTRFS_DIR_LOG_INDEX_KEY key twice, but for this to happen we need to race with insertions of items from other inodes in the subvolume's tree while we are logging a directory. Here's how this can happen: 1) We are logging a directory with inode number 1000 that has its items spread across 3 leaves in the subvolume's tree: leaf A - has index keys from the range 2 to 20 for example. The last item in the leaf corresponds to a dir item for index number 20. All these dir items were created in a past transaction. leaf B - has index keys from the range 22 to 100 for example. It has no keys from other inodes, all its keys are dir index keys for our directory inode number 1000. Its first key is for the dir item with a sequence number of 22. All these dir items were also created in a past transaction. leaf C - has index keys for our directory for the range 101 to 120 for example. This leaf also has items from other inodes, and its first item corresponds to the dir item for index number 101 for our directory with inode number 1000; 2) When we finish processing the items from leaf A at log_dir_items(), we log a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and a last offset of 21, meaning the log is authoritative for the index range from 21 to 21 (a single sequence number). At this point leaf B was not yet modified in the current transaction; 3) When we return from log_dir_items() we have released our read lock on leaf B, and have set *last_offset_ret to 21 (index number of the first item on leaf B minus 1); 4) Some other task inserts an item for other inode (inode number 1001 for example) into leaf C. That resulted in pushing some items from leaf C into leaf B, in order to make room for the new item, so now leaf B has dir index keys for the sequence number range from 22 to 102 and leaf C has the dir items for the sequence number range 103 to 120; 5) At log_directory_changes() we call log_dir_items() again, passing it a 'min_offset' / 'min_key' value of 22 (*last_offset_ret from step 3 plus 1, so 21 + 1). Then btrfs_search_forward() leaves us at slot 0 of leaf B, since leaf B was modified in the current transaction. We have also initialized 'last_old_dentry_offset' to 20 after calling btrfs_previous_item() at log_dir_items(), as it left us at the last item of leaf A, which refers to the dir item with sequence number 20; 6) We then call process_dir_items_leaf() to process the dir items of leaf B, and when we process the first item, corresponding to slot 0, sequence number 22, we notice the dir item was created in a past transaction and its sequence number is greater than the value of *last_old_dentry_offset + 1 (20 + 1), so we decide to log again a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and an end range of 21 (key.offset - 1 == 22 - 1 == 21), which results in an -EEXIST error from insert_dir_log_key(), as we have already inserted that key at step 2, triggering the assertion at process_dir_items_leaf(). The trace produced in dmesg is like the following: assertion failed: ret != -EEXIST, in fs/btrfs/tree-log.c:3857 [198255.980839][ T7460] ------------[ cut here ]------------ [198255.981666][ T7460] kernel BUG at fs/btrfs/ctree.h:3617! [198255.983141][ T7460] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [198255.984080][ T7460] CPU: 0 PID: 7460 Comm: repro-ghost-dir Not tainted 5.18.0-5314c78ac373-misc-next+ [198255.986027][ T7460] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [198255.988600][ T7460] RIP: 0010:assertfail.constprop.0+0x1c/0x1e [198255.989465][ T7460] Code: 8b 4c 89 (...) [198255.992599][ T7460] RSP: 0018:ffffc90007387188 EFLAGS: 00010282 [198255.993414][ T7460] RAX: 000000000000003d RBX: 0000000000000065 RCX: 0000000000000000 [198255.996056][ T7460] RDX: 0000000000000001 RSI: ffffffff8b62b180 RDI: fffff52000e70e24 [198255.997668][ T7460] RBP: ffffc90007387188 R08: 000000000000003d R09: ffff8881f0e16507 [198255.999199][ T7460] R10: ffffed103e1c2ca0 R11: 0000000000000001 R12: 00000000ffffffef [198256.000683][ T7460] R13: ffff88813befc630 R14: ffff888116c16e70 R15: ffffc90007387358 [198256.007082][ T7460] FS: 00007fc7f7c24640(0000) GS:ffff8881f0c00000(0000) knlGS:0000000000000000 [198256.009939][ T7460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [198256.014133][ T7460] CR2: 0000560bb16d0b78 CR3: 0000000140b34005 CR4: 0000000000170ef0 [198256.015239][ T7460] Call Trace: [198256.015674][ T7460] <TASK> [198256.016313][ T7460] log_dir_items.cold+0x16/0x2c [198256.018858][ T7460] ? replay_one_extent+0xbf0/0xbf0 [198256.025932][ T7460] ? release_extent_buffer+0x1d2/0x270 [198256.029658][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.031114][ T7460] ? lock_acquired+0xbe/0x660 [198256.032633][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.034386][ T7460] ? lock_release+0xcf/0x8a0 [198256.036152][ T7460] log_directory_changes+0xf9/0x170 [198256.036993][ T7460] ? log_dir_items+0xba0/0xba0 [198256.037661][ T7460] ? do_raw_write_unlock+0x7d/0xe0 [198256.038680][ T7460] btrfs_log_inode+0x233b/0x26d0 [198256.041294][ T7460] ? log_directory_changes+0x170/0x170 [198256.042864][ T7460] ? btrfs_attach_transaction_barrier+0x60/0x60 [198256.045130][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.046568][ T7460] ? lock_release+0xcf/0x8a0 [198256.047504][ T7460] ? lock_downgrade+0x420/0x420 [198256.048712][ T7460] ? ilookup5_nowait+0x81/0xa0 [198256.049747][ T7460] ? lock_downgrade+0x420/0x420 [198256.050652][ T7460] ? do_raw_spin_unlock+0xa9/0x100 [198256.051618][ T7460] ? __might_resched+0x128/0x1c0 [198256.052511][ T7460] ? __might_sleep+0x66/0xc0 [198256.053442][ T7460] ? __kasan_check_read+0x11/0x20 [198256.054251][ T7460] ? iget5_locked+0xbd/0x150 [198256.054986][ T7460] ? run_delayed_iput_locked+0x110/0x110 [198256.055929][ T7460] ? btrfs_iget+0xc7/0x150 [198256.056630][ T7460] ? btrfs_orphan_cleanup+0x4a0/0x4a0 [198256.057502][ T7460] ? free_extent_buffer+0x13/0x20 [198256.058322][ T7460] btrfs_log_inode+0x2654/0x26d0 [198256.059137][ T7460] ? log_directory_changes+0x170/0x170 [198256.060020][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.060930][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.061905][ T7460] ? lock_contended+0x770/0x770 [198256.062682][ T7460] ? btrfs_log_inode_parent+0xd04/0x1750 [198256.063582][ T7460] ? lock_downgrade+0x420/0x420 [198256.064432][ T7460] ? preempt_count_sub+0x18/0xc0 [198256.065550][ T7460] ? __mutex_lock+0x580/0xdc0 [198256.066654][ T7460] ? stack_trace_save+0x94/0xc0 [198256.068008][ T7460] ? __kasan_check_write+0x14/0x20 [198256.072149][ T7460] ? __mutex_unlock_slowpath+0x12a/0x430 [198256.073145][ T7460] ? mutex_lock_io_nested+0xcd0/0xcd0 [198256.074341][ T7460] ? wait_for_completion_io_timeout+0x20/0x20 [198256.075345][ T7460] ? lock_downgrade+0x420/0x420 [198256.076142][ T7460] ? lock_contended+0x770/0x770 [198256.076939][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0 [198256.078401][ T7460] ? btrfs_sync_file+0x5e6/0xa40 [198256.080598][ T7460] btrfs_log_inode_parent+0x523/0x1750 [198256.081991][ T7460] ? wait_current_trans+0xc8/0x240 [198256.083320][ T7460] ? lock_downgrade+0x420/0x420 [198256.085450][ T7460] ? btrfs_end_log_trans+0x70/0x70 [198256.086362][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.087544][ T7460] ? lock_release+0xcf/0x8a0 [198256.088305][ T7460] ? lock_downgrade+0x420/0x420 [198256.090375][ T7460] ? dget_parent+0x8e/0x300 [198256.093538][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0 [198256.094918][ T7460] ? lock_downgrade+0x420/0x420 [198256.097815][ T7460] ? do_raw_spin_unlock+0xa9/0x100 [198256.101822][ T7460] ? dget_parent+0xb7/0x300 [198256.103345][ T7460] btrfs_log_dentry_safe+0x48/0x60 [198256.105052][ T7460] btrfs_sync_file+0x629/0xa40 [198256.106829][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120 [198256.109655][ T7460] ? __fget_files+0x161/0x230 [198256.110760][ T7460] vfs_fsync_range+0x6d/0x110 [198256.111923][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120 [198256.113556][ T7460] __x64_sys_fsync+0x45/0x70 [198256.114323][ T7460] do_syscall_64+0x5c/0xc0 [198256.115084][ T7460] ? syscall_exit_to_user_mode+0x3b/0x50 [198256.116030][ T7460] ? do_syscall_64+0x69/0xc0 [198256.116768][ T7460] ? do_syscall_64+0x69/0xc0 [198256.117555][ T7460] ? do_syscall_64+0x69/0xc0 [198256.118324][ T7460] ? sysvec_call_function_single+0x57/0xc0 [198256.119308][ T7460] ? asm_sysvec_call_function_single+0xa/0x20 [198256.120363][ T7460] entry_SYSCALL_64_after_hwframe+0x44/0xae [198256.121334][ T7460] RIP: 0033:0x7fc7fe97b6ab [198256.122067][ T7460] Code: 0f 05 48 (...) [198256.125198][ T7460] RSP: 002b:00007fc7f7c23950 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [198256.126568][ T7460] RAX: ffffffffffffffda RBX: 00007fc7f7c239f0 RCX: 00007fc7fe97b6ab [198256.127942][ T7460] RDX: 0000000000000002 RSI: 000056167536bcf0 RDI: 0000000000000004 [198256.129302][ T7460] RBP: 0000000000000004 R08: 0000000000000000 R09: 000000007ffffeb8 [198256.130670][ T7460] R10: 00000000000001ff R11: 0000000000000293 R12: 0000000000000001 [198256.132046][ T7460] R13: 0000561674ca8140 R14: 00007fc7f7c239d0 R15: 000056167536dab8 [198256.133403][ T7460] </TASK> Fix this by treating -EEXIST as expected at insert_dir_log_key() and have it update the item with an end offset corresponding to the maximum between the previously logged end offset and the new requested end offset. The end offsets may be different due to dir index key deletions that happened as part of unlink operations while we are logging a directory (triggered when fsyncing some other inode parented by the directory) or during renames which always attempt to log a single dir index deletion. Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Link: https://lore.kernel.org/linux-btrfs/YmyefE9mc2xl5ZMz@hungrycats.org/ Fixes: 732d591a5d6c12 ("btrfs: stop copying old dir items when logging a directory") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-05btrfs: zoned: activate block group properly on unlimited active zone deviceNaohiro Aota1-14/+8
btrfs_zone_activate() checks if it activated all the underlying zones in the loop. However, that check never hit on an unlimited activate zone device (max_active_zones == 0). Fortunately, it still works without ENOSPC because btrfs_zone_activate() returns true in the end, even if block_group->zone_is_active == 0. But, it is confusing to have non zone_is_active block group still usable for allocation. Also, we are wasting CPU time to iterate the loop every time btrfs_zone_activate() is called for the blog groups. Since error case in the loop is handled by out_unlock, we can just set zone_is_active and do the list stuff after the loop. Fixes: f9a912a3c45f ("btrfs: zoned: make zone activation multi stripe capable") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-05btrfs: zoned: move non-changing condition check out of the loopNaohiro Aota1-6/+6
btrfs_zone_activate() checks if block_group->alloc_offset == block_group->zone_capacity every time it iterates the loop. But, it is not depending on the index. Move out the check and do it only once. Fixes: f9a912a3c45f ("btrfs: zoned: make zone activation multi stripe capable") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-05btrfs: force v2 space cache usage for subpage mountQu Wenruo1-0/+11
[BUG] For a 4K sector sized btrfs with v1 cache enabled and only mounted on systems with 4K page size, if it's mounted on subpage (64K page size) systems, it can cause the following warning on v1 space cache: BTRFS error (device dm-1): csum mismatch on free space cache BTRFS warning (device dm-1): failed to load free space cache for block group 84082688, rebuilding it now Although not a big deal, as kernel can rebuild it without problem, such warning will bother end users, especially if they want to switch the same btrfs seamlessly between different page sized systems. [CAUSE] V1 free space cache is still using fixed PAGE_SIZE for various bitmap, like BITS_PER_BITMAP. Such hard-coded PAGE_SIZE usage will cause various mismatch, from v1 cache size to checksum. Thus kernel will always reject v1 cache with a different PAGE_SIZE with csum mismatch. [FIX] Although we should fix v1 cache, it's already going to be marked deprecated soon. And we have v2 cache based on metadata (which is already fully subpage compatible), and it has almost everything superior than v1 cache. So just force subpage mount to use v2 cache on mount. Reported-by: Matt Corallo <blnxfsl@bluematt.me> CC: stable@vger.kernel.org # 5.15+ Link: https://lore.kernel.org/linux-btrfs/61aa27d1-30fc-c1a9-f0f4-9df544395ec3@bluematt.me/ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-02Merge tag 'for-5.18-rc5-tag' of ↵Linus Torvalds6-23/+91
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes mostly around how some file attributes could be set. - fix handling of compression property: - don't allow setting it on anything else than regular file or directory - do not allow setting it on nodatacow files via properties - improved error handling when setting xattr - make sure symlinks are always properly logged" * tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: skip compression property for anything other than files and dirs btrfs: do not BUG_ON() on failure to update inode when setting xattr btrfs: always log symlinks in full mode btrfs: do not allow compression on nodatacow files btrfs: export a helper for compression hard check
2022-04-27btrfs: skip compression property for anything other than files and dirsFilipe Manana3-0/+47
The compression property only has effect on regular files and directories (so that it's propagated to files and subdirectories created inside a directory). For any other inode type (symlink, fifo, device, socket), it's pointless to set the compression property because it does nothing and ends up unnecessarily wasting leaf space due to the pointless xattr (75 or 76 bytes, depending on the compression value). Symlinks in particular are very common (for example, I have almost 10k symlinks under /etc, /usr and /var alone) and therefore it's worth to avoid wasting leaf space with the compression xattr. For example, the compression property can end up on a symlink or character device implicitly, through inheritance from a parent directory $ mkdir /mnt/testdir $ btrfs property set /mnt/testdir compression lzo $ ln -s yadayada /mnt/testdir/lnk $ mknod /mnt/testdir/dev c 0 0 Or explicitly like this: $ ln -s yadayda /mnt/lnk $ setfattr -h -n btrfs.compression -v lzo /mnt/lnk So skip the compression property on inodes that are neither a regular file nor a directory. CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-27btrfs: do not BUG_ON() on failure to update inode when setting xattrFilipe Manana1-2/+4
We are doing a BUG_ON() if we fail to update an inode after setting (or clearing) a xattr, but there's really no reason to not instead simply abort the transaction and return the error to the caller. This should be a rare error because we have previously reserved enough metadata space to update the inode and the delayed inode should have already been setup, so an -ENOSPC or -ENOMEM, which are the possible errors, are very unlikely to happen. So replace the BUG_ON()s with a transaction abort. CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-27btrfs: always log symlinks in full modeFilipe Manana1-1/+13
On Linux, empty symlinks are invalid, and attempting to create one with the system call symlink(2) results in an -ENOENT error and this is explicitly documented in the man page. If we rename a symlink that was created in the current transaction and its parent directory was logged before, we actually end up logging the symlink without logging its content, which is stored in an inline extent. That means that after a power failure we can end up with an empty symlink, having no content and an i_size of 0 bytes. It can be easily reproduced like this: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ sync # Create a file inside the directory and fsync the directory. $ touch /mnt/testdir/foo $ xfs_io -c "fsync" /mnt/testdir # Create a symlink inside the directory and then rename the symlink. $ ln -s /mnt/testdir/foo /mnt/testdir/bar $ mv /mnt/testdir/bar /mnt/testdir/baz # Now fsync again the directory, this persist the log tree. $ xfs_io -c "fsync" /mnt/testdir <power failure> $ mount /dev/sdc /mnt $ stat -c %s /mnt/testdir/baz 0 $ readlink /mnt/testdir/baz $ Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that their content is also logged. A test case for fstests will follow. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-27btrfs: do not allow compression on nodatacow filesChung-Chiang Cheng3-7/+14
Compression and nodatacow are mutually exclusive. A similar issue was fixed by commit f37c563bab429 ("btrfs: add missing check for nocow and compression inode flags"). Besides ioctl, there is another way to enable/disable/reset compression directly via xattr. The following steps will result in a invalid combination. $ touch bar $ chattr +C bar $ lsattr bar ---------------C-- bar $ setfattr -n btrfs.compression -v zstd bar $ lsattr bar --------c------C-- bar To align with the logic in check_fsflags, nocompress will also be unacceptable after this patch, to prevent mix any compression-related options with nodatacow. $ touch bar $ chattr +C bar $ lsattr bar ---------------C-- bar $ setfattr -n btrfs.compression -v zstd bar setfattr: bar: Invalid argument $ setfattr -n btrfs.compression -v no bar setfattr: bar: Invalid argument When both compression and nodatacow are enabled, then btrfs_run_delalloc_range prefers nodatacow and no compression happens. Reported-by: Jayce Lin <jaycelin@synology.com> CC: stable@vger.kernel.org # 5.10.x: e6f9d6964802: btrfs: export a helper for compression hard check CC: stable@vger.kernel.org # 5.10.x Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-27btrfs: export a helper for compression hard checkChung-Chiang Cheng2-13/+13
inode_can_compress will be used outside of inode.c to check the availability of setting compression flag by xattr. This patch moves this function as an internal helper and renames it to btrfs_inode_can_compress. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-26Merge tag 'for-5.18-rc4-tag' of ↵Linus Torvalds9-29/+76
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - direct IO fixes: - restore passing file offset to correctly calculate checksums when repairing on read and bio split happens - use correct bio when sumitting IO on zoned filesystem - zoned mode fixes: - fix selection of device to correctly calculate device capabilities when allocating a new bio - use a dedicated lock for exclusion during relocation - fix leaked plug after failure syncing log - fix assertion during scrub and relocation * tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: use dedicated lock for data relocation btrfs: fix assertion failure during scrub due to block group reallocation btrfs: fix direct I/O writes for split bios on zoned devices btrfs: fix direct I/O read repair for split bios btrfs: fix and document the zoned device choice in alloc_new_bio btrfs: fix leaked plug after failure syncing log on zoned filesystems
2022-04-25btrfs: Avoid live-lock in search_ioctl() on hardware with sub-page faultsCatalin Marinas1-1/+6
Commit a48b73eca4ce ("btrfs: fix potential deadlock in the search ioctl") addressed a lockdep warning by pre-faulting the user pages and attempting the copy_to_user_nofault() in an infinite loop. On architectures like arm64 with MTE, an access may fault within a page at a location different from what fault_in_writeable() probed. Since the sk_offset is rewound to the previous struct btrfs_ioctl_search_header boundary, there is no guaranteed forward progress and search_ioctl() may live-lock. Use fault_in_subpage_writeable() instead of fault_in_writeable() to ensure the permission is checked at the right granularity (smaller than PAGE_SIZE). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: a48b73eca4ce ("btrfs: fix potential deadlock in the search ioctl") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220423100751.1870771-4-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-21btrfs: zoned: use dedicated lock for data relocationNaohiro Aota3-2/+4
Currently, we use btrfs_inode_{lock,unlock}() to grant an exclusive writeback of the relocation data inode in btrfs_zoned_data_reloc_{lock,unlock}(). However, that can cause a deadlock in the following path. Thread A takes btrfs_inode_lock() and waits for metadata reservation by e.g, waiting for writeback: prealloc_file_extent_cluster() - btrfs_inode_lock(&inode->vfs_inode, 0); - btrfs_prealloc_file_range() ... - btrfs_replace_file_extents() - btrfs_start_transaction ... - btrfs_reserve_metadata_bytes() Thread B (e.g, doing a writeback work) needs to wait for the inode lock to continue writeback process: do_writepages - btrfs_writepages - extent_writpages - btrfs_zoned_data_reloc_lock(BTRFS_I(inode)); - btrfs_inode_lock() The deadlock is caused by relying on the vfs_inode's lock. By using it, we introduced unnecessary exclusion of writeback and btrfs_prealloc_file_range(). Also, the lock at this point is useless as we don't have any dirty pages in the inode yet. Introduce fs_info->zoned_data_reloc_io_lock and use it for the exclusive writeback. Fixes: 35156d852762 ("btrfs: zoned: only allow one process to add pages to a relocation inode") CC: stable@vger.kernel.org # 5.16.x: 869f4cdc73f9: btrfs: zoned: encapsulate inode locking for zoned relocation CC: stable@vger.kernel.org # 5.16.x CC: stable@vger.kernel.org # 5.17 Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-21btrfs: fix assertion failure during scrub due to block group reallocationFilipe Manana2-2/+31
During a scrub, or device replace, we can race with block group removal and allocation and trigger the following assertion failure: [7526.385524] assertion failed: cache->start == chunk_offset, in fs/btrfs/scrub.c:3817 [7526.387351] ------------[ cut here ]------------ [7526.387373] kernel BUG at fs/btrfs/ctree.h:3599! [7526.388001] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [7526.388970] CPU: 2 PID: 1158150 Comm: btrfs Not tainted 5.17.0-rc8-btrfs-next-114 #4 [7526.390279] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [7526.392430] RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs] [7526.393520] Code: f3 48 c7 c7 20 (...) [7526.396926] RSP: 0018:ffffb9154176bc40 EFLAGS: 00010246 [7526.397690] RAX: 0000000000000048 RBX: ffffa0db8a910000 RCX: 0000000000000000 [7526.398732] RDX: 0000000000000000 RSI: ffffffff9d7239a2 RDI: 00000000ffffffff [7526.399766] RBP: ffffa0db8a911e10 R08: ffffffffa71a3ca0 R09: 0000000000000001 [7526.400793] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa0db4b170800 [7526.401839] R13: 00000003494b0000 R14: ffffa0db7c55b488 R15: ffffa0db8b19a000 [7526.402874] FS: 00007f6c99c40640(0000) GS:ffffa0de6d200000(0000) knlGS:0000000000000000 [7526.404038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7526.405040] CR2: 00007f31b0882160 CR3: 000000014b38c004 CR4: 0000000000370ee0 [7526.406112] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7526.407148] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7526.408169] Call Trace: [7526.408529] <TASK> [7526.408839] scrub_enumerate_chunks.cold+0x11/0x79 [btrfs] [7526.409690] ? do_wait_intr_irq+0xb0/0xb0 [7526.410276] btrfs_scrub_dev+0x226/0x620 [btrfs] [7526.410995] ? preempt_count_add+0x49/0xa0 [7526.411592] btrfs_ioctl+0x1ab5/0x36d0 [btrfs] [7526.412278] ? __fget_files+0xc9/0x1b0 [7526.412825] ? kvm_sched_clock_read+0x14/0x40 [7526.413459] ? lock_release+0x155/0x4a0 [7526.414022] ? __x64_sys_ioctl+0x83/0xb0 [7526.414601] __x64_sys_ioctl+0x83/0xb0 [7526.415150] do_syscall_64+0x3b/0xc0 [7526.415675] entry_SYSCALL_64_after_hwframe+0x44/0xae [7526.416408] RIP: 0033:0x7f6c99d34397 [7526.416931] Code: 3c 1c e8 1c ff (...) [7526.419641] RSP: 002b:00007f6c99c3fca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [7526.420735] RAX: ffffffffffffffda RBX: 00005624e1e007b0 RCX: 00007f6c99d34397 [7526.421779] RDX: 00005624e1e007b0 RSI: 00000000c400941b RDI: 0000000000000003 [7526.422820] RBP: 0000000000000000 R08: 00007f6c99c40640 R09: 0000000000000000 [7526.423906] R10: 00007f6c99c40640 R11: 0000000000000246 R12: 00007fff746755de [7526.424924] R13: 00007fff746755df R14: 0000000000000000 R15: 00007f6c99c40640 [7526.425950] </TASK> That assertion is relatively new, introduced with commit d04fbe19aefd2 ("btrfs: scrub: cleanup the argument list of scrub_chunk()"). The block group we get at scrub_enumerate_chunks() can actually have a start address that is smaller then the chunk offset we extracted from a device extent item we got from the commit root of the device tree. This is very rare, but it can happen due to a race with block group removal and allocation. For example, the following steps show how this can happen: 1) We are at transaction T, and we have the following blocks groups, sorted by their logical start address: [ bg A, start address A, length 1G (data) ] [ bg B, start address B, length 1G (data) ] (...) [ bg W, start address W, length 1G (data) ] --> logical address space hole of 256M, there used to be a 256M metadata block group here [ bg Y, start address Y, length 256M (metadata) ] --> Y matches W's end offset + 256M Block group Y is the block group with the highest logical address in the whole filesystem; 2) Block group Y is deleted and its extent mapping is removed by the call to remove_extent_mapping() made from btrfs_remove_block_group(). So after this point, the last element of the mapping red black tree, its rightmost node, is the mapping for block group W; 3) While still at transaction T, a new data block group is allocated, with a length of 1G. When creating the block group we do a call to find_next_chunk(), which returns the logical start address for the new block group. This calls returns X, which corresponds to the end offset of the last block group, the rightmost node in the mapping red black tree (fs_info->mapping_tree), plus one. So we get a new block group that starts at logical address X and with a length of 1G. It spans over the whole logical range of the old block group Y, that was previously removed in the same transaction. However the device extent allocated to block group X is not the same device extent that was used by block group Y, and it also does not overlap that extent, which must be always the case because we allocate extents by searching through the commit root of the device tree (otherwise it could corrupt a filesystem after a power failure or an unclean shutdown in general), so the extent allocator is behaving as expected; 4) We have a task running scrub, currently at scrub_enumerate_chunks(). There it searches for device extent items in the device tree, using its commit root. It finds a device extent item that was used by block group Y, and it extracts the value Y from that item into the local variable 'chunk_offset', using btrfs_dev_extent_chunk_offset(); It then calls btrfs_lookup_block_group() to find block group for the logical address Y - since there's currently no block group that starts at that logical address, it returns block group X, because its range contains Y. This results in triggering the assertion: ASSERT(cache->start == chunk_offset); right before calling scrub_chunk(), as cache->start is X and chunk_offset is Y. This is more likely to happen of filesystems not larger than 50G, because for these filesystems we use a 256M size for metadata block groups and a 1G size for data block groups, while for filesystems larger than 50G, we use a 1G size for both data and metadata block groups (except for zoned filesystems). It could also happen on any filesystem size due to the fact that system block groups are always smaller (32M) than both data and metadata block groups, but these are not frequently deleted, so much less likely to trigger the race. So make scrub skip any block group with a start offset that is less than the value we expect, as that means it's a new block group that was created in the current transaction. It's pointless to continue and try to scrub its extents, because scrub searches for extents using the commit root, so it won't find any. For a device replace, skip it as well for the same reasons, and we don't need to worry about the possibility of extents of the new block group not being to the new device, because we have the write duplication setup done through btrfs_map_block(). Fixes: d04fbe19aefd ("btrfs: scrub: cleanup the argument list of scrub_chunk()") CC: stable@vger.kernel.org # 5.17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19btrfs: fix direct I/O writes for split bios on zoned devicesChristoph Hellwig1-2/+3
When a bio is split in btrfs_submit_direct, dip->file_offset contains the file offset for the first bio. But this means the start value used in btrfs_end_dio_bio to record the write location for zone devices is incorrect for subsequent bios. CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19btrfs: fix direct I/O read repair for split biosChristoph Hellwig3-8/+9
When a bio is split in btrfs_submit_direct, dip->file_offset contains the file offset for the first bio. But this means the start value used in btrfs_check_read_dio_bio is incorrect for subsequent bios. Add a file_offset field to struct btrfs_bio to pass along the correct offset. Given that check_data_csum only uses start of an error message this means problems with this miscalculation will only show up when I/O fails or checksums mismatch. The logic was removed in f4f39fc5dc30 ("btrfs: remove btrfs_bio::logical member") but we need it due to the bio splitting. CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19btrfs: fix and document the zoned device choice in alloc_new_bioChristoph Hellwig1-15/+28
Zone Append bios only need a valid block device in struct bio, but not the device in the btrfs_bio. Use the information from btrfs_zoned_get_device to set up bi_bdev and fix zoned writes on multi-device file system with non-homogeneous capabilities and remove the pointless btrfs_bio.device assignment. Add big fat comments explaining what is going on here. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19btrfs: fix leaked plug after failure syncing log on zoned filesystemsFilipe Manana1-0/+1
On a zoned filesystem, if we fail to allocate the root node for the log root tree while syncing the log, we end up returning without finishing the IO plug we started before, resulting in leaking resources as we have started writeback for extent buffers of a log tree before. That allocation failure, which typically is either -ENOMEM or -ENOSPC, is not fatal and the fsync can safely fallback to a full transaction commit. So release the IO plug if we fail to allocate the extent buffer for the root of the log root tree when syncing the log on a zoned filesystem. Fixes: 3ddebf27fcd3a9 ("btrfs: zoned: reorder log node allocation on zoned filesystem") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-18block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARDChristoph Hellwig1-2/+2
Secure erase is a very different operation from discard in that it is a data integrity operation vs hint. Fully split the limits and helper infrastructure to make the separation more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2] Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Chao Yu <chao@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-18block: add a bdev_discard_granularity helperChristoph Hellwig1-8/+4
Abstract away implementation details from file systems by providing a block_device based helper to retrieve the discard granularity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-18block: remove QUEUE_FLAG_DISCARDChristoph Hellwig2-3/+3
Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-18block: add a bdev_write_cache helperChristoph Hellwig1-2/+1
Add a helper to check the write cache flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-18block: add a bdev_nonrot helperChristoph Hellwig1-2/+2
Add a helper to check the nonrot flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-18btrfs: use bdev_max_active_zones instead of open coding itChristoph Hellwig1-2/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-18btrfs: simplify ->flush_bio handlingChristoph Hellwig3-16/+7
Use and embedded bios that is initialized when used instead of bio_kmalloc plus bio_reset. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220406061228.410163-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-14Merge tag 'for-5.18-rc2-tag' of ↵Linus Torvalds8-23/+49
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more code and warning fixes. There's one feature ioctl removal patch slated for 5.18 that did not make it to the main pull request. It's just a one-liner and the ioctl has a v2 that's in use for a long time, no point to postpone it to 5.19. Late update: - remove balance v1 ioctl, superseded by v2 in 2012 Fixes: - add back cgroup attribution for compressed writes - add super block write start/end annotations to asynchronous balance - fix root reference count on an error handling path - in zoned mode, activate zone at the chunk allocation time to avoid ENOSPC due to timing issues - fix delayed allocation accounting for direct IO Warning fixes: - simplify assertion condition in zoned check - remove an unused variable" * tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix btrfs_submit_compressed_write cgroup attribution btrfs: fix root ref counts in error handling in btrfs_get_root_ref btrfs: zoned: activate block group only for extent allocation btrfs: return allocated block group from do_chunk_alloc() btrfs: mark resumed async balance as writing btrfs: remove support of balance v1 ioctl btrfs: release correct delalloc amount in direct IO write path btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups() btrfs: zoned: remove redundant condition in btrfs_run_delalloc_range
2022-04-06btrfs: fix btrfs_submit_compressed_write cgroup attributionDennis Zhou1-0/+8
This restores the logic from commit 46bcff2bfc5e ("btrfs: fix compressed write bio blkcg attribution") which added cgroup attribution to btrfs writeback. It also adds back the REQ_CGROUP_PUNT flag for these ios. Fixes: 91507240482e ("btrfs: determine stripe boundary at bio allocation time in btrfs_submit_compressed_write") CC: stable@vger.kernel.org # 5.16+ Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-06btrfs: fix root ref counts in error handling in btrfs_get_root_refJia-Ju Bai1-2/+3
In btrfs_get_root_ref(), when btrfs_insert_fs_root() fails, btrfs_put_root() can happen for two reasons: - the root already exists in the tree, in that case it returns the reference obtained in btrfs_lookup_fs_root() - another error so the cleanup is done in the fail label Calling btrfs_put_root() unconditionally would lead to double decrement of the root reference possibly freeing it in the second case. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Fixes: bc44d7c4b2b1 ("btrfs: push btrfs_grab_fs_root into btrfs_get_fs_root") CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-06btrfs: zoned: activate block group only for extent allocationNaohiro Aota3-9/+21
In btrfs_make_block_group(), we activate the allocated block group, expecting that the block group is soon used for allocation. However, the chunk allocation from flush_space() context broke the assumption. There can be a large time gap between the chunk allocation time and the extent allocation time from the chunk. Activating the empty block groups pre-allocated from flush_space() context can exhaust the active zone counter of a device. Once we use all the active zone counts for empty pre-allocated block groups, we cannot activate new block group for the other things: metadata, tree-log, or data relocation block group. That failure results in a fake -ENOSPC. This patch introduces CHUNK_ALLOC_FORCE_FOR_EXTENT to distinguish the chunk allocation from find_free_extent(). Now, the new block group is activated only in that context. Fixes: eb66a010d518 ("btrfs: zoned: activate new block group") CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-06btrfs: return allocated block group from do_chunk_alloc()Naohiro Aota1-3/+13
Return the allocated block group from do_chunk_alloc(). This is a preparation patch for the next patch. CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-06btrfs: mark resumed async balance as writingNaohiro Aota1-0/+2
When btrfs balance is interrupted with umount, the background balance resumes on the next mount. There is a potential deadlock with FS freezing here like as described in commit 26559780b953 ("btrfs: zoned: mark relocation as writing"). Mark the process as sb_writing to avoid it. Reviewed-by: Filipe Manana <fdmanana@suse.com> CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-06btrfs: remove support of balance v1 ioctlNikolay Borisov1-2/+0
It was scheduled for removal in kernel v5.18 commit 6c405b24097c ("btrfs: deprecate BTRFS_IOC_BALANCE ioctl") thus its time has come. Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-06btrfs: release correct delalloc amount in direct IO write pathNaohiro Aota1-3/+3
Running generic/406 causes the following WARNING in btrfs_destroy_inode() which tells there are outstanding extents left. In btrfs_get_blocks_direct_write(), we reserve a temporary outstanding extents with btrfs_delalloc_reserve_metadata() (or indirectly from btrfs_delalloc_reserve_space(()). We then release the outstanding extents with btrfs_delalloc_release_extents(). However, the "len" can be modified in the COW case, which releases fewer outstanding extents than expected. Fix it by calling btrfs_delalloc_release_extents() for the original length. To reproduce the warning, the filesystem should be 1 GiB. It's triggering a short-write, due to not being able to allocate a large extent and instead allocating a smaller one. WARNING: CPU: 0 PID: 757 at fs/btrfs/inode.c:8848 btrfs_destroy_inode+0x1e6/0x210 [btrfs] Modules linked in: btrfs blake2b_generic xor lzo_compress lzo_decompress raid6_pq zstd zstd_decompress zstd_compress xxhash zram zsmalloc CPU: 0 PID: 757 Comm: umount Not tainted 5.17.0-rc8+ #101 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014 RIP: 0010:btrfs_destroy_inode+0x1e6/0x210 [btrfs] RSP: 0018:ffffc9000327bda8 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff888100548b78 RCX: 0000000000000000 RDX: 0000000000026900 RSI: 0000000000000000 RDI: ffff888100548b78 RBP: ffff888100548940 R08: 0000000000000000 R09: ffff88810b48aba8 R10: 0000000000000001 R11: ffff8881004eb240 R12: ffff88810b48a800 R13: ffff88810b48ec08 R14: ffff88810b48ed00 R15: ffff888100490c68 FS: 00007f8549ea0b80(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f854a09e733 CR3: 000000010a2e9003 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> destroy_inode+0x33/0x70 dispose_list+0x43/0x60 evict_inodes+0x161/0x1b0 generic_shutdown_super+0x2d/0x110 kill_anon_super+0xf/0x20 btrfs_kill_super+0xd/0x20 [btrfs] deactivate_locked_super+0x27/0x90 cleanup_mnt+0x12c/0x180 task_work_run+0x54/0x80 exit_to_user_mode_prepare+0x152/0x160 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f854a000fb7 Fixes: f0bfa76a11e9 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range") CC: stable@vger.kernel.org # 5.17 Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-06btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups()Nathan Chancellor1-4/+0
Clang's version of -Wunused-but-set-variable recently gained support for unary operations, which reveals two unused variables: fs/btrfs/block-group.c:2949:6: error: variable 'num_started' set but not used [-Werror,-Wunused-but-set-variable] int num_started = 0; ^ fs/btrfs/block-group.c:3116:6: error: variable 'num_started' set but not used [-Werror,-Wunused-but-set-variable] int num_started = 0; ^ 2 errors generated. These variables appear to be unused from their introduction, so just remove them to silence the warnings. Fixes: c9dc4c657850 ("Btrfs: two stage dirty block group writeout") Fixes: 1bbc621ef284 ("Btrfs: allow block group cache writeout outside critical section in commit") CC: stable@vger.kernel.org # 5.4+ Link: https://github.com/ClangBuiltLinux/linux/issues/1614 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-06btrfs: zoned: remove redundant condition in btrfs_run_delalloc_rangeHaowen Bai1-2/+1
The logic !A || A && B is equivalent to !A || B. so we can make code clear. Note: though it's preferred to be in the more human readable form, there have been repeated reports and patches as the expression is detected by tools so apply it to reduce the load. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Haowen Bai <baihaowen@meizu.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add note ] Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-05Merge tag 'for-5.18-rc1-tag' of ↵Linus Torvalds6-55/+81
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - prevent deleting subvolume with active swapfile - fix qgroup reserve limit calculation overflow - remove device count in superblock and its item in one transaction so they cant't get out of sync - skip defragmenting an isolated sector, this could cause some extra IO - unify handling of mtime/permissions in hole punch with fallocate - zoned mode fixes: - remove assert checking for only single mode, we have the DUP mode implemented - fix potential lockdep warning while traversing devices when checking for zone activation * tag 'for-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: prevent subvol with swapfile from being deleted btrfs: do not warn for free space inode in cow_file_range btrfs: avoid defragging extents whose next extents are not targets btrfs: fix fallocate to use file_modified to update permissions consistently btrfs: remove device item and update super block in the same transaction btrfs: fix qgroup reserve overflow the qgroup limit btrfs: zoned: remove left over ASSERT checking for single profile btrfs: zoned: traverse devices under chunk_mutex in btrfs_can_activate_zone
2022-04-01btrfs: Remove a use of PAGE_SIZE in btrfs_invalidate_folio()Matthew Wilcox (Oracle)1-1/+1
While btrfs doesn't use large folios yet, this should have been changed as part of the conversion from invalidatepage to invalidate_folio. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Al Viro <viro@zeniv.linux.org.uk>
2022-04-01fs: Remove ->readpages address space operationMatthew Wilcox (Oracle)1-2/+2
All filesystems have now been converted to use ->readahead, so remove the ->readpages operation and fix all the comments that used to refer to it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Al Viro <viro@zeniv.linux.org.uk>
2022-03-26Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull NVMe write streams removal from Jens Axboe: "This removes the write streams support in NVMe. No vendor ever really shipped working support for this, and they are not interested in supporting it. With the NVMe support gone, we have nothing in the tree that supports this. Remove passing around of the hints. The only discussion point in this patchset imho is the fact that the file specific write hint setting/getting fcntl helpers will now return -1/EINVAL like they did before we supported write hints. No known applications use these functions, I only know of one prototype that I help do for RocksDB, and that's not used. That said, with a change like this, it's always a bit controversial. Alternatively, we could just make them return 0 and pretend it worked. It's placement based hints after all" * tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block: fs: remove fs.f_write_hint fs: remove kiocb.ki_hint block: remove the per-bio/request write hint nvme: remove support or stream based temperature hint
2022-03-25Merge tag 'kbuild-gnu11-v5.18' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild update for C11 language base from Masahiro Yamada: "Kbuild -std=gnu11 updates for v5.18 Linus pointed out the benefits of C99 some years ago, especially variable declarations in loops [1]. At that time, we were not ready for the migration due to old compilers. Recently, Jakob Koschel reported a bug in list_for_each_entry(), which leaks the invalid pointer out of the loop [2]. In the discussion, we agreed that the time had come. Now that GCC 5.1 is the minimum compiler version, there is nothing to prevent us from going to -std=gnu99, or even straight to -std=gnu11. Discussions for a better list iterator implementation are ongoing, but this patch set must land first" [1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/ [2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/ * tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS Kbuild: move to -std=gnu11 Kbuild: use -Wdeclaration-after-statement Kbuild: add -Wno-shift-negative-value where -Wextra is used
2022-03-24btrfs: prevent subvol with swapfile from being deletedKaiwen Hu1-0/+22
A subvolume with an active swapfile must not be deleted otherwise it would not be possible to deactivate it. After the subvolume is deleted, we cannot swapoff the swapfile in this deleted subvolume because the path is unreachable. The swapfile is still active and holding references, the filesystem cannot be unmounted. The test looks like this: mkfs.btrfs -f $dev > /dev/null mount $dev $mnt btrfs sub create $mnt/subvol touch $mnt/subvol/swapfile chmod 600 $mnt/subvol/swapfile chattr +C $mnt/subvol/swapfile dd if=/dev/zero of=$mnt/subvol/swapfile bs=1K count=4096 mkswap $mnt/subvol/swapfile swapon $mnt/subvol/swapfile btrfs sub delete $mnt/subvol swapoff $mnt/subvol/swapfile # failed: No such file or directory swapoff --all unmount $mnt # target is busy. To prevent above issue, we simply check that whether the subvolume contains any active swapfile, and stop the deleting process. This behavior is like snapshot ioctl dealing with a swapfile. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Kaiwen Hu <kevinhu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24btrfs: do not warn for free space inode in cow_file_rangeJosef Bacik1-1/+0
This is a long time leftover from when I originally added the free space inode, the point was to catch cases where we weren't honoring the NOCOW flag. However there exists a race with relocation, if we allocate our free space inode in a block group that is about to be relocated, we could trigger the COW path before the relocation has the opportunity to find the extents and delete the free space cache. In production where we have auto-relocation enabled we're seeing this WARN_ON_ONCE() around 5k times in a 2 week period, so not super common but enough that it's at the top of our metrics. We're properly handling the error here, and with us phasing out v1 space cache anyway just drop the WARN_ON_ONCE. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24btrfs: avoid defragging extents whose next extents are not targetsQu Wenruo1-6/+14
[BUG] There is a report that autodefrag is defragging single sector, which is completely waste of IO, and no help for defragging: btrfs-cleaner-808 defrag_one_locked_range: root=256 ino=651122 start=0 len=4096 [CAUSE] In defrag_collect_targets(), we check if the current range (A) can be merged with next one (B). If mergeable, we will add range A into target for defrag. However there is a catch for autodefrag, when checking mergeability against range B, we intentionally pass 0 as @newer_than, hoping to get a higher chance to merge with the next extent. But in the next iteration, range B will looked up by defrag_lookup_extent(), with non-zero @newer_than. And if range B is not really newer, it will rejected directly, causing only range A being defragged, while we expect to defrag both range A and B. [FIX] Since the root cause is the difference in check condition of defrag_check_next_extent() and defrag_collect_targets(), we fix it by: 1. Pass @newer_than to defrag_check_next_extent() 2. Pass @extent_thresh to defrag_check_next_extent() This makes the check between defrag_collect_targets() and defrag_check_next_extent() more consistent. While there is still some minor difference, the remaining checks are focus on runtime flags like writeback/delalloc, which are mostly transient and safe to be checked only in defrag_collect_targets(). Link: https://github.com/btrfs/linux/issues/423#issuecomment-1066981856 CC: stable@vger.kernel.org # 5.16+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24btrfs: fix fallocate to use file_modified to update permissions consistentlyDarrick J. Wong1-2/+11
Since the initial introduction of (posix) fallocate back at the turn of the century, it has been possible to use this syscall to change the user-visible contents of files. This can happen by extending the file size during a preallocation, or through any of the newer modes (punch, zero range). Because the call can be used to change file contents, we should treat it like we do any other modification to a file -- update the mtime, and drop set[ug]id privileges/capabilities. The VFS function file_modified() does all this for us if pass it a locked inode, so let's make fallocate drop permissions correctly. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24btrfs: remove device item and update super block in the same transactionQu Wenruo1-37/+28
[BUG] There is a report that a btrfs has a bad super block num devices. This makes btrfs to reject the fs completely. BTRFS error (device sdd3): super_num_devices 3 mismatch with num_devices 2 found here BTRFS error (device sdd3): failed to read chunk tree: -22 BTRFS error (device sdd3): open_ctree failed [CAUSE] During btrfs device removal, chunk tree and super block num devs are updated in two different transactions: btrfs_rm_device() |- btrfs_rm_dev_item(device) | |- trans = btrfs_start_transaction() | | Now we got transaction X | | | |- btrfs_del_item() | | Now device item is removed from chunk tree | | | |- btrfs_commit_transaction() | Transaction X got committed, super num devs untouched, | but device item removed from chunk tree. | (AKA, super num devs is already incorrect) | |- cur_devices->num_devices--; |- cur_devices->total_devices--; |- btrfs_set_super_num_devices() All those operations are not in transaction X, thus it will only be written back to disk in next transaction. So after the transaction X in btrfs_rm_dev_item() committed, but before transaction X+1 (which can be minutes away), a power loss happen, then we got the super num mismatch. [FIX] Instead of starting and committing a transaction inside btrfs_rm_dev_item(), start a transaction in side btrfs_rm_device() and pass it to btrfs_rm_dev_item(). And only commit the transaction after everything is done. Reported-by: Luca Béla Palkovics <luca.bela.palkovics@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CA+8xDSpvdm_U0QLBAnrH=zqDq_cWCOH5TiV46CKmp3igr44okQ@mail.gmail.com/ CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-24btrfs: fix qgroup reserve overflow the qgroup limitEthan Lien1-1/+1
We use extent_changeset->bytes_changed in qgroup_reserve_data() to record how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the bytes_changed is set as "unsigned int", and it will overflow if we try to fallocate a range larger than 4GiB. The result is we reserve less bytes and eventually break the qgroup limit. Unlike regular buffered/direct write, which we use one changeset for each ordered extent, which can never be larger than 256M. For fallocate, we use one changeset for the whole range, thus it no longer respects the 256M per extent limit, and caused the problem. The following example test script reproduces the problem: $ cat qgroup-overflow.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj mkfs.btrfs -f $DEV mount $DEV $MNT # Set qgroup limit to 2GiB. btrfs quota enable $MNT btrfs qgroup limit 2G $MNT # Try to fallocate a 3GiB file. This should fail. echo echo "Try to fallocate a 3GiB file..." fallocate -l 3G $MNT/3G.file # Try to fallocate a 5GiB file. echo echo "Try to fallocate a 5GiB file..." fallocate -l 5G $MNT/5G.file # See we break the qgroup limit. echo sync btrfs qgroup show -r $MNT umount $MNT When running the test: $ ./qgroup-overflow.sh (...) Try to fallocate a 3GiB file... fallocate: fallocate failed: Disk quota exceeded Try to fallocate a 5GiB file... qgroupid         rfer         excl     max_rfer --------         ----         ----     -------- 0/5           5.00GiB      5.00GiB      2.00GiB Since we have no control of how bytes_changed is used, it's better to set it to u64. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Ethan Lien <ethanlien@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 02:34:15 +0300