| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI APEI error injection driver failure that started to
occur after switching it over to using a faux device, address an EC
driver issue related to invalid ECDT tables, clean up the usage of
mwait_idle_with_hints() in the ACPI PAD driver, add a new IRQ override
quirk, and fix a NULL pointer dereference related to nosmp:
- Update the faux device handling code in the driver core and address
an ACPI APEI error injection driver failure that started to occur
after switching it over to using a faux device on top of that (Dan
Williams)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator
device) driver to match the function definition after recent
changes (Uros Bizjak)
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui)
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf)
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan)"
* tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Use IRQ override on MACHENIKE 16P
ACPI: EC: Ignore ECDT tables with an invalid ID string
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
ACPI: PAD: Update arguments of mwait_idle_with_hints()
ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failure
driver core: faux: Quiet probe failures
driver core: faux: Suppress bind attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the cpupower utility installation, fix up the recently added
Rust abstractions for cpufreq and OPP, restore the x86 update
eliminating mwait_play_dead_cpuid_hint() that has been reverted during
the 6.16 merge window along with preventing the failure caused by it
from happening, and clean up mwait_idle_with_hints() usage in
intel_idle:
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh
Kumar)
- Do minor cleanups in the `# Safety` sections for cpufreq
abstractions added recently (Viresh Kumar)
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli)
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered
(Rafael Wysocki)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition after
recent changes (Uros Bizjak)"
* tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
rust: cpu: Add CpuId::current() to retrieve current CPU ID
rust: Use CpuId in place of raw CPU numbers
rust: cpu: Introduce CpuId abstraction
intel_idle: Update arguments of mwait_idle_with_hints()
cpufreq: Convert `/// SAFETY` lines to `# Safety` sections
cpupower: split unitdir from libdir in Makefile
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
|
|
Merge assorted ACPI updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator device)
driver to match the function definition after recent changes (Uros
Bizjak).
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui).
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf).
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan).
* acpi-pad:
ACPI: PAD: Update arguments of mwait_idle_with_hints()
* acpi-cppc:
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
* acpi-ec:
ACPI: EC: Ignore ECDT tables with an invalid ID string
* acpi-resource:
ACPI: resource: Use IRQ override on MACHENIKE 16P
|
|
4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing")
intended to put PCI devices into D0, but in doing so unintentionally
changed runtime PM initialization not to occur on devices that don't
support PCI PM. This caused a regression in vfio-pci due to an imbalance
with its use.
Adjust the logic in pci_pm_init() so that even if PCI PM isn't supported
runtime PM is still initialized.
Fixes: 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing")
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m7e8929d6421690dc8bd6dc639d86c2b4db27cbc4
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m40d277dcdb9be64a1609a82412d1aa906263e201
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Link: https://patch.msgid.link/20250611233117.61810-1-superm1@kernel.org
|
|
Merge cpuidle updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the merge window due to a problem with handling
"dead" SMT siblings, but this time prevent leaving them in C1 after
initialization by taking them online and back offline when a proper
cpuidle driver for the platform has been registered (Rafael Wysocki).
* pm-cpuidle:
intel_idle: Update arguments of mwait_idle_with_hints()
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, most minor apart from the OMAP
ones which disable some recent performance optimisations in some
non-standard cases where we could start driving the bus incorrectly.
The change to the stm32-ospi driver to use the newer reset APIs is a
fix for interactions with other IP sharing the same reset line in some
SoCs"
* tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engine
spi: stm32-ospi: clean up on error in probe()
spi: stm32-ospi: Make usage of reset_control_acquire/release() API
spi: offload: check offload ops existence before disabling the trigger
spi: spi-pci1xxxx: Fix error code in probe
spi: loongson: Fix build warnings about export.h
spi: omap2-mcspi: Disable multi-mode when the previous message kept CS asserted
spi: omap2-mcspi: Disable multi mode when CS should be kept asserted after message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One minor fix for a leak in the DT parsing code in the max20086 driver"
* tag 'regulator-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()
|
|
The Kconfig option `CONFIG_DRM_VKMS_KUNIT_TESTS` does not exist. However,
the VKMS format tests use such an option for compilation, meaning that
they are not compiled at all.
Use the Kconfig option `CONFIG_DRM_VKMS_KUNIT_TEST` to compile all VKMS
KUnit tests.
Fixes: 3e897853debd ("drm/vkms: Create KUnit tests for YUV conversions")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20250611205704.334527-1-mcanal@igalia.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
The DMA memory for this driver is allocated using dma_alloc_coherent(),
which ends up mapping the allocated memory as uncached. Performing the
various dma_sync_*() operations on this memory causes issues during SPI
flashing:
[ 7.818017] pc : dcache_inval_poc+0x40/0x58
[ 7.822128] lr : arch_sync_dma_for_cpu+0x2c/0x4c
[ 7.826854] sp : ffff80008193bcf0
[ 7.830267] x29: ffff80008193bcf0 x28: ffffa3fe5ff1e908 x27: ffffa3fe627bb130
[ 7.837528] x26: ffff000086952180 x25: ffff00008015c8ac x24: ffff000086c9b480
[ 7.844878] x23: ffff00008015c800 x22: 0000000000000002 x21: 0000000000010000
[ 7.852229] x20: 0000000106dae000 x19: ffff000080112410 x18: 0000000000000001
[ 7.859580] x17: ffff000080159400 x16: ffffa3fe607a9bd8 x15: ffff0000eac1b180
[ 7.866753] x14: 000000000000000c x13: 0000000000000001 x12: 000000000000025a
[ 7.874104] x11: 0000000000000000 x10: 7f73e96357f6a07f x9 : db1fc8072a7f5e3a
[ 7.881365] x8 : ffff000086c9c588 x7 : ffffa3fe607a9bd8 x6 : ffff80008193bc28
[ 7.888630] x5 : 000000000000ffff x4 : 0000000000000009 x3 : 000000000000003f
[ 7.895892] x2 : 0000000000000040 x1 : ffff000086dbe000 x0 : ffff000086db0000
[ 7.903155] Call trace:
[ 7.905606] dcache_inval_poc+0x40/0x58 (P)
[ 7.909804] iommu_dma_sync_single_for_cpu+0xb4/0xb8
[ 7.914617] __dma_sync_single_for_cpu+0x158/0x194
[ 7.919428] __this_module+0x5b020/0x5baf8 [spi_tegra210_quad]
[ 7.925291] irq_thread_fn+0x2c/0xc0
[ 7.928966] irq_thread+0x16c/0x318
[ 7.932467] kthread+0x12c/0x214
Fix this by removing all calls to the dma_sync_*() functions. This isn't
ideal because DMA is used only for relatively large (> 64 words or 256
bytes) and using uncached memory for this might be slow. Reworking this
to use cached memory for faster access and reintroducing the cache
maintenance calls is probably worth a follow-up patch.
Reported-by: Brad Griffis <bgriffis@nvidia.com>
Fixes: 017f1b0bae08 ("spi: tegra210-quad: Add support for internal DMA")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250613123037.2082788-1-thierry.reding@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
By inspection, cxl_cper_handle_prot_err() is making a series of fragile
assumptions that can lead to crashes:
1/ It assumes that endpoints identified in the record are a CXL-type-3
device, nothing guarantees that.
2/ It assumes that the device is bound to the cxl_pci driver, nothing
guarantees that.
3/ Minor, it holds the device lock over the switch-port tracing for no
reason as the trace is 100% generated from data in the record.
Correct those by checking that the PCIe endpoint parents a cxl_memdev
before assuming the format of the driver data, and move the lock to where
it is required. Consequently this also makes the implementation ready for
CXL accelerators that are not bound to cxl_pci.
Fixes: 36f257e3b0ba ("acpi/ghes, cxl/pci: Process CXL CPER Protocol Errors")
Cc: Terry Bowman <terry.bowman@amd.com>
Cc: Li Ming <ming.li@zohomail.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250612192043.2254617-1-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In cxl_store_rec_gen_media() and cxl_store_rec_dram(), use kmemdup() to
duplicate a cxl gen_media/dram event to store the event in a xarray by
xa_store(). The cxl gen_media/dram event allocated by kmemdup() should
be freed in the case that the xa_store() fails.
Fixes: 0b5ccb0de1e2 ("cxl/edac: Support for finding memory operation attributes from the current boot")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250613011648.102840-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
This driver uses a mixture of ways to get the size of a PTE,
tegra_smmu_set_pde() did it as sizeof(*pd) which became wrong when pd
switched to a struct tegra_pd.
Switch pd back to a u32* in tegra_smmu_set_pde() so the sizeof(*pd)
returns 4.
Fixes: 50568f87d1e2 ("iommu/terga: Do not use struct page as the handle for as->pd memory")
Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Closes: https://lore.kernel.org/all/62e7f7fe-6200-4e4f-ad42-d58ad272baa6@tecnico.ulisboa.pt/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/0-v1-da7b8b3d57eb+ce-iommu_terga_sizeof_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The nouveau_get_backlight_name() function generates a unique name for the
backlight interface, appending an id from 1 to 99 for all backlight devices
after the first.
GCC 15 (and likely other compilers) produce the following
-Wformat-truncation warning:
nouveau_backlight.c: In function ‘nouveau_backlight_init’:
nouveau_backlight.c:56:69: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 3 [-Werror=format-truncation=]
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~
In function ‘nouveau_get_backlight_name’,
inlined from ‘nouveau_backlight_init’ at nouveau_backlight.c:351:7:
nouveau_backlight.c:56:56: note: directive argument in the range [1, 2147483647]
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~~~~~~~~~~~~~~~
nouveau_backlight.c:56:17: note: ‘snprintf’ output between 14 and 23 bytes into a destination of size 15
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The warning started appearing after commit ab244be47a8f ("drm/nouveau:
Fix a potential theorical leak in nouveau_get_backlight_name()") This fix
for the ida usage removed the explicit value check for ids larger than 99.
The compiler is unable to intuit that the ida_alloc_max() limits the
returned value range between 0 and 99.
Because the compiler can no longer infer that the number ranges from 0 to
99, it thinks that it could use as many as 11 digits (10 + the potential -
sign for negative numbers).
The warning has gone unfixed for some time, with at least one kernel test
robot report. The code breaks W=1 builds, which is especially frustrating
with the introduction of CONFIG_WERROR.
The string is stored temporarily on the stack and then copied into the
device name. Its not a big deal to use 11 more bytes of stack rounding out
to an even 24 bytes. Increase BL_NAME_SIZE to 24 to avoid the truncation
warning. This fixes the W=1 builds that include this driver.
Compile tested only.
Fixes: ab244be47a8f ("drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312050324.0kv4PnfZ-lkp@intel.com/
Suggested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20250610-jk-nouveua-drm-bl-snprintf-fix-v2-1-7fdd4b84b48e@intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The RPC container is released after being passed to r535_gsp_rpc_send().
When sending the initial fragment of a large RPC and passing the
caller's RPC container, the container will be freed prematurely. Subsequent
attempts to send remaining fragments will therefore result in a
use-after-free.
Allocate a temporary RPC container for holding the initial fragment of a
large RPC when sending. Free the caller's container when all fragments
are successfully sent.
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Link: https://lore.kernel.org/r/20250527163712.3444-1-zhiw@nvidia.com
[ Rebase onto Blackwell changes. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The left shift int 32 bit integer constants 1 is evaluated using 32 bit
arithmetic and then assigned to a 64 bit unsigned integer. In the case
where the shift is 32 or more this can lead to an overflow. Avoid this
by shifting using the BIT_ULL macro instead.
Fixes: 6c3ac7bcfcff ("drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250522131512.2768310-1-colin.i.king@gmail.com
|
|
This reverts commit c2aa5603af309968a10f8e0d929ec7662ada5f78.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/aEwls5hPP9p-DPtt@phenom.ffwll.local
|
|
Driver in probe() updates each of 'reg_field' with 'reg_base':
for (i = 0; i < REG_MAX_COUNT; i++)
regs[i].reg += reg_base;
'reg_field' array (under variable 'regs' above) is statically allocated,
thus each re-bind would add another 'reg_base' leading to bogus
register addresses. Constify the local 'reg_field' array and duplicate
it in probe to solve this.
Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250529063335.8785-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit a979a54165c2 ("drm/format-helper: Normalize BT.601 factors
to 256") improved rounding precision of the BT.601 calculation, which
impacts the results of soem of the format-helper tests. Adapt the test
to the new results.
v2:
- fix spelling in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a979a54165c2 ("drm/format-helper: Normalize BT.601 factors to 256")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250613111711.136993-1-tzimmermann@suse.de
|
|
A user has bisected a regression which causes graphical corruptions on his
screen to commit 7627a0edef54 ("ata: ahci: Drop low power policy board
type").
Simply reverting commit 7627a0edef54 ("ata: ahci: Drop low power policy
board type") makes the graphical corruptions on his screen to go away.
(Note: there are no visible messages in dmesg that indicates a problem
with AHCI.)
The user also reports that the problem occurs regardless if there is an
HDD or an SSD connected via AHCI, so the problem is not device related.
The devices also work fine on other motherboards, so it seems specific to
the ASUSPRO-D840SA motherboard.
While enabling low power modes for AHCI is not supposed to affect
completely unrelated hardware, like a graphics card, it does however
allow the system to enter deeper PC-states, which could expose ACPI issues
that were previously not visible (because the system never entered these
lower power states before).
There are previous examples where enabling LPM exposed serious BIOS/ACPI
bugs, see e.g. commit 240630e61870 ("ahci: Disable LPM on Lenovo 50 series
laptops with a too old BIOS").
Since there hasn't been any BIOS update in years for the ASUSPRO-D840SA
motherboard, disable LPM for this board, in order to avoid entering lower
PC-states, which triggers graphical corruptions.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220111
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250612141750.2108342-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
m16 R1"
This reverts commit 5ff79cabb23a2f14d2ed29e9596aec908905a0e6.
Although the Alienware m16 R1 AMD model supports G-Mode, it actually has
a lower power ceiling than plain "performance" profile, which results in
lower performance.
Reported-by: Cihan Ozakca <cozakca@outlook.com>
Cc: stable@vger.kernel.org # 6.15.x
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250611-m16-rev-v1-1-72d13bad03c9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every other s2idle cycle fails to reach hardware sleep when keyboard
wakeup is enabled. This appears to be an EC bug, but the vendor
refuses to fix it.
It was confirmed that turning off i8042 wakeup avoids ths issue
(albeit keyboard wakeup is disabled). Take the lesser of two evils
and add it to the i8042 quirk list.
Reported-by: Raoul <ein4rth@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116
Tested-by: Raoul <ein4rth@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Removes MSI-X from the interrupt request path, as the DMA engine used by
the SPI controller does not support MSI-X interrupts.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250612023059.71726-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Needed for new development of the pci1xxxx driver.
|
|
When multiple WMI devices with the same GUID are present
inside a given system, the WMI driver core might fail to
register all of them.
Consider the following scenario:
WMI devices (<GUID>[-<ID>]):
05901221-D566-11D1-B2F0-00A0C9062910 (on PNP0C14:00)
05901221-D566-11D1-B2F0-00A0C9062910-1 (on PNP0C14:01)
If the WMI core driver somehow unbinds from PNP0C14:00, the following
will happen upon rebinding:
1. The WMI driver core counts all registered WMI devices with a GUID
of 05901221-D566-11D1-B2F0-00A0C9062910 (count: 1).
2. The new WMI device will be named
"05901221-D566-11D1-B2F0-00A0C9062910-1" because another device
with the same GUID is already registered (on PNP0C14:01).
3. The new WMI device cannot be registered due to a name conflict.
Use a IDA when building the WMI device name to avoid such name
collisions by ensuring that a given WMI device ID is not reused.
Userspace applications using udev for WMI device detection are not
impacted by this change. Additionally userspace applications that do
fully support the existing naming scheme are also not impacted. Only
userspace applications using hardcoded sysfs paths will break.
Introduce a kconfig option for restoring the old naming scheme to
give developers time to fix any compatibility issues.
Tested on a Asus Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250610055526.23688-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250610-yoga-aux-v1-1-d6115aa1683c@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Follow the sysfs ABI documentation that drivers should round written
values to the nearest supported value instead of returning an error.
Tested on a Fujitsu Lifebook U7720.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20250609102115.36936-3-jvanderwaa@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The charge control threshold value ranges from 0-100.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20250609102115.36936-2-jvanderwaa@redhat.com
[ij: use reverse xmas-tree order]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
As of commit 92ac7de3175e3 ("gpiolib: don't allow setting values on input
lines"), the GPIO core makes sure values cannot be set on input lines.
Remove the unnecessary check.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250612074835.13800-1-brgl@bgdev.pl
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
devm_pinctrl_register_mappings()
Use devm_pinctrl_register_mappings(), so the core automatically unregisters
the pinctrl mappings. It makes the code easier to read.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250609-lenovo-yoga-tab2-pro-1380-fastcharger-devm-pinctrl-register-mappings-v1-1-fb601f2b80f6@bootlin.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When KCOV is enabled all functions get instrumented, unless the
__no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions[1], we have
to handle differences in how GCC's inline optimizations get resolved.
For thinkpad_acpi routines, this means forcing two functions to be
inline with __always_inline.
Link: https://lore.kernel.org/lkml/20250523043935.2009972-11-kees@kernel.org/ [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529181831.work.439-kees@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Cancel any entries on the delayed work queue before starting
to tear down the lif to be sure there is no race with any
other events.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the kern_dbpage gets set up in ionic_lif_init() and that
function's error path will clean it if needed, the kern_dbpage
on teardown should be cleaned in ionic_lif_deinit(), not in
ionic_lif_free(). As it is currently we get a double call
to iounmap() on kern_dbpage if the PCI ionic fails setting up
the lif. One example of this is when firmware isn't responding
to AdminQ requests and ionic's first AdminQ call fails to
setup the NotifyQ.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The firmware heartbeat value is an unsigned number, and seeing
a negative number when it gets big is a little disconcerting.
Example:
ionic 0000:24:00.0: FW heartbeat stalled at -1342169688
Print using the unsigned flag.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to configure decompression as a separate service for QAT GEN6
devices. A new arbiter configuration has been added to map the hardware
decompression threads to all ring pairs.
The decompression service is enabled via sysfs by writing "decomp" to
"/sys/bus/pci/devices/<BDF>/qat/cfg_services".
The decompression service is not supported on QAT GEN2 and GEN4 devices,
and attempting it results in an invalid write error. The existing
compression service for QAT GEN2 and GEN4 devices remains unchanged and
supports both compression and decompression operations on the same ring
pair.
Co-developed-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The dedicated cpumask_next_wrap() is more verbose and better optimized
comparing to cpumask_next() followed by cpumask_first().
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the logic in the restore function to properly handle bank
exceptions.
The check for exceptions in the saved state should be performed before
conducting any other ringstat register checks.
If a bank was saved with an exception, the ringstat will have the
appropriate rp_halt/rp_exception bits set, causing the driver to exit
the restore process with an error. Instead, the restore routine should
first check the ringexpstat register, and if any exception was raised,
it should stop further checks and return without any error. In other
words, if a ring pair is in an exception state at the source, it should
be restored the same way at the destination but without raising an error.
Even though this approach might lead to losing the exception state
during migration, the driver will log the exception from the saved state
during the restore process.
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Fixes: bbfdde7d195f ("crypto: qat - add bank save and restore flows")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The commit ca88a2bdd4dd ("crypto: qat - allow disabling SR-IOV VFs")
introduced an unnecessary change that prevented enabling SR-IOV when
IOMMU is disabled. In certain scenarios, it is desirable to enable
SR-IOV even in the absence of IOMMU. Thus, restoring the previous
functionality to allow VFs to be enumerated in the absence of IOMMU.
Fixes: ca88a2bdd4dd ("crypto: qat - allow disabling SR-IOV VFs")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Michal Witwicki <michal.witwicki@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix below smatch warnings:
drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked()
error: we previously assumed 'error' could be null
Fixes: 9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505071746.eWOx5QgC-lkp@intel.com/
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cryptographic Accelerator Unit (CPT) support different engine groups, one
for asymmetric algorithms (only AE engines in this group), one for the
most common symmetric algorithms (all SE and all IE engines in this group),
and one for other symmetric algorithms (only SE engines in this group).
For symmetric engine (SE), we obtain the group number using
"MBOX_MSG_GET_ENG_GRP_NUM" mailbox. Let's follow a similar approach to
determine the group number for asymmetric engine (AE).
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
By default, otx2_cpt_get_kcrypto_eng_grp_num() returns the engine group
number of SE engine type. Add an engine type parameter to support
retrieving the engine group number for different engine types.
Since otx2_cpt_get_kcrypto_eng_grp_num() always returns the kernel crypto
engine group number, rename it to otx2_cpt_get_eng_grp_num().
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If an error occurs during queueing the engine load will never be
decremented. Fix this by moving the engine load adjustment into
the cleanup function.
Fixes: bf8f91e71192 ("crypto: marvell - Add load balancing between engines")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5f5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()
Memory allocated are used for following purpose:
- Input data or scatter list address - 8-Byte alignment
- Output data or gather list address - 8-Byte alignment
- Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5f5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()
Memory allocated are used for following purpose:
- Input data or scatter list address - 8-Byte alignment
- Output data or gather list address - 8-Byte alignment
- Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5f5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()"
Completion address should be 32-Byte alignment when loading
microcode.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Adds timeout to exit from possible infinite loop, which polls
on CPT instruction(load_fvc) completion.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is no point in setting the hash state after finalisation
since the hash state must never be used again. Remove that code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The dc_data structure holds data required for handling compression
operations, such as overflow buffers. In this context, the use of
managed memory allocation APIs (devm_kzalloc() and devm_kfree())
is not necessary, as these data structures are freed and
re-allocated when a device is restarted in adf_dev_down() and
adf_dev_up().
Additionally, managed APIs automatically handle memory cleanup when the
device is detached, which can lead to conflicts with manual cleanup
processes. Specifically, if a device driver invokes the adf_dev_down()
function as part of the cleanup registered with
devm_add_action_or_reset(), it may attempt to free memory that is also
managed by the device's resource management system, potentially leading
to a double-free.
This might result in a warning similar to the following when unloading
the device specific driver, for example qat_6xxx.ko:
qat_free_dc_data+0x4f/0x60 [intel_qat]
qat_compression_event_handler+0x3d/0x1d0 [intel_qat]
adf_dev_shutdown+0x6d/0x1a0 [intel_qat]
adf_dev_down+0x32/0x50 [intel_qat]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
Use unmanaged memory allocation APIs (kzalloc_node() and kfree()) for
the dc_data structure. This ensures that memory is explicitly allocated
and freed under the control of the driver code, preventing manual
deallocation from interfering with automatic cleanup.
Fixes: 1198ae56c9a5 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The bootloader info reg for pspv6 is the same as pspv4 and pspv5.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use crypto_ahash_blocksize() and crypto_ahash_digestsize() helpers instead
of directly accessing 'struct ahash_alg' members.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove `ivlen` field of `sun8i_cipher_req_ctx`, as it is not really useful.
The iv length returned by crypto_skcipher_ivsize() is already available
everywhere and can be used instead.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
