| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When /dev/ttyDBC0 device is created then by default ECHO flag
is set for the terminal device. However if data arrives from
a peer before application using /dev/ttyDBC0 applies its set
of terminal flags then the arriving data will be echoed which
might not be desired behavior.
Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.")
Cc: stable <stable@kernel.org>
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/stable/20250610111802.18742-1-ukaszb%40chromium.org
Link: https://lore.kernel.org/r/20250627144127.3889714-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Disable stream for platform xHC controller with broken stream.
Fixes: 14aec589327a6 ("storage: accept some UAS devices if streams are unavailable")
Cc: stable <stable@kernel.org>
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During the High-Speed Isochronous Audio transfers, xHCI
controller on certain AMD platforms experiences momentary data
loss. This results in Missed Service Errors (MSE) being
generated by the xHCI.
The root cause of the MSE is attributed to the ISOC OUT endpoint
being omitted from scheduling. This can happen when an IN
endpoint with a 64ms service interval either is pre-scheduled
prior to the ISOC OUT endpoint or the interval of the ISOC OUT
endpoint is shorter than that of the IN endpoint. Consequently,
the OUT service is neglected when an IN endpoint with a service
interval exceeding 32ms is scheduled concurrently (every 64ms in
this scenario).
This issue is particularly seen on certain older AMD platforms.
To mitigate this problem, it is recommended to adjust the service
interval of the IN endpoint to not exceed 32ms (interval 8). This
adjustment ensures that the OUT endpoint will not be bypassed,
even if a smaller interval value is utilized.
Cc: stable <stable@kernel.org>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 96c7bf8f6b3e ("usb: dwc3: gadget: Cleanup SG handling") updated
the TRB reclaim path to use the TRB CHN (Chain) bit to determine whether
a TRB was part of a chain. However, this inadvertently changed the
behavior of reclaiming the final TRB in some scatter-gather or short
transfer cases.
In particular, if the final TRB did not have the CHN bit set, the
cleanup path could incorrectly skip clearing the HWO (Hardware Own)
bit, leaving stale TRBs in the ring. This resulted in broken data
transfer completions in userspace, notably for MTP over FunctionFS.
Fix this by unconditionally clearing the HWO bit during TRB reclaim,
regardless of the CHN bit state. This restores correct behavior
especially for transfers that require ZLPs or end on non-CHN TRBs.
Fixes: 61440628a4ff ("usb: dwc3: gadget: Cleanup SG handling")
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/AM8PR06MB7521A29A8863C838B54987B6BC7BA@AM8PR06MB7521.eurprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix Kconfig symbol dependency on KUNIT, which isn't actually required
for XE to be built-in. However, if KUNIT is enabled, it must be built-in
too.
Fixes: 08987a8b6820 ("drm/xe: Fix build with KUNIT=m")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Harry Austen <hpausten@protonmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250627-xe-kunit-v2-2-756fe5cd56cf@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
If CONFIG_DRM_XE_DISPLAY is set, the xe module can only be built as
module to avoid duplicate symbols from i915. The interface for pcode was
added without considering that, so the build breaks if both xe and i915
are built-in.
Since the intel_pcode_* functions should only be called from the display
side (xe side should call the xe interface directly) and there's already
a protection in Kconfig to avoid the problematic configuration, ifdef it
out in case CONFIG_DRM_XE_DISPLAY is disabled.
Closes: https://lore.kernel.org/r/3667a992-a24b-4e49-aab2-5ca73f2c0a56@infradead.org
Fixes: d9465cc8ac2d ("drm/xe/pcode: add struct drm_device based interface")
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250627-xe-kunit-v2-1-756fe5cd56cf@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add FourCC definitions for the 48-bit RGB/BGR formats to the
DRM/KMS uapi.
The format will be used by the Raspberry Pi PiSP Back End,
supported by a V4L2 driver in kernel space and by libcamera in
userspace, which uses the DRM FourCC identifiers.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Link: https://lore.kernel.org/r/20240226132544.82817-1-jacopo.mondi@ideasonboard.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Fix a PTM debugfs build error with CONFIG_DEBUG_FS=n &&
CONFIG_PCIE_PTM=y (Manivannan Sadhasivam)
* tag 'pci-v6.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/PTM: Build debugfs code only if CONFIG_DEBUG_FS is enabled
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly drm updates, nothing out of the ordinary, amdgpu, xe,
i915 and a few misc bits. Seems about right for this time in the
release cycle.
core:
- fix drm_writeback_connector_cleanup function signature
- use correct HDMI audio bridge in drm_connector_hdmi_audio_init
bridge:
- SN65DSI86: fix HPD
amdgpu:
- Cleaner shader support for additional GFX9 GPUs
- MES firmware compatibility fixes
- Discovery error reporting fixes
- SDMA6/7 userq fixes
- Backlight fix
- EDID sanity check
i915:
- Fix for SNPS PHY HDMI for 1080p@120Hz
- Correct DP AUX DPCD probe address
- Followup build fix for GCOV and AutoFDO enabled config
xe:
- Missing error check
- Fix xe_hwmon_power_max_write
- Move flushes
- Explicitly exit CT safe mode on unwind
- Process deferred GGTT node removals on device unwind"
* tag 'drm-fixes-2025-06-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Process deferred GGTT node removals on device unwind
drm/xe/guc: Explicitly exit CT safe mode on unwind
drm/xe: move DPT l2 flush to a more sensible place
drm/xe: Move DSB l2 flush to a more sensible place
drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type
drm/i915: fix build error some more
drm/xe/hwmon: Fix xe_hwmon_power_max_write
drm/xe/display: Add check for alloc_ordered_workqueue()
drm/amd/display: Add sanity checks for drm_edid_raw()
drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value
drm/amdgpu/sdma7: add ucode version checks for userq support
drm/amdgpu/sdma6: add ucode version checks for userq support
drm/amd: Adjust output for discovery error handling
drm/amdgpu/mes: add compatibility checks for set_hw_resource_1
drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUs
drm/bridge-connector: Fix bridge in drm_connector_hdmi_audio_init()
drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS
drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64
drm: writeback: Fix drm_writeback_connector_cleanup signature
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-3-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-2-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-1-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
"These fixes address a few issues in the CXL subsystem, including
dealing with some bugs in the CXL EDAC and RAS drivers:
- Fix return value of cxlctl_validate_set_features()
- Fix min_scrub_cycle of a region miscaculation and add additional
documentation
- Fix potential memory leak issues for CXL EDAC
- Fix CPER handler device confusion for CXL RAS
- Fix using wrong repair type to check DRAM event record"
* tag 'cxl-fixes-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/edac: Fix using wrong repair type to check dram event record
cxl/ras: Fix CPER handler device confusion
cxl/edac: Fix potential memory leak issues
cxl/Documentation: Add more description about min/max scrub cycle
cxl/edac: Fix the min_scrub_cycle of a region miscalculation
cxl: fix return value in cxlctl_validate_set_features()
|
|
The driver registered xdp_rxq_info structures via xdp_rxq_info_reg()
but failed to properly unregister them in error paths and during
removal.
Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20250626133003.80136-1-wangfushuai@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The `dma_map_XXX()` functions can fail and must be checked using
`dma_mapping_error()`. This patch adds proper error handling for all
DMA mapping calls.
In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is
deallocated and marked accordingly.
In `atl1_tx_map()`, previously mapped buffers are unmapped and the
packet is dropped on failure.
If `atl1_xmit_frame()` drops the packet, increment the tx_error counter.
Fixes: f3cc28c79760 ("Add Attansic L1 ethernet driver.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20250625141629.114984-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current implementation considers only first advertise
mode and passes the same to firmware to process.
This patch extends code such that user can advertise
multiple modes on the given interface.
Below are high level changes:
1. Remove unnecessary speed/duplex/autoneg validation as its
already verified as part of "set_link_ksettings"
2. Since scratch csr framework designed to support single mode at a time,
use "shared firmware data" for multi mode support.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250625092107.9746-4-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kernel and firmware communicates via scratch register which is
64 bit in size.
[MODE_ID PORT AUTONEG DUPLEX SPEED CMD_ID OWNERSHIP ]
63-22 21-14 13 12 11-8 7-2 1-0
The existing MODE_ID bitmap can only support up to 42 modes.
To resolve the issue, the unused port field is modified as below
uint64_t reserved2:6;
uint64_t mode_group_idx:2;
'mode_group_idx' categorize the mode ID range to accommodate more modes.
To specify mode ID range of 0 - 41, this field will be 0.
To specify mode ID range of 42 - 83, this field will be 1.
mode ID will be still mentioned as 1 << (0 - 41). But the mode_group_idx
decides the actual mode range
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250625092107.9746-3-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current implementation maps ethtool link modes 10baseT/100baseT/1000baseT
to single firmware mode SGMII. This create a problem for end users who want
to advertise only one speed among them.
This patch addresses the issue by mapping each ethtool link mode
to a corresponding firmware mode also updates new modes supported
by firmware.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250625092107.9746-2-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement reference sync input pin get/set callbacks, allow user space
control over dpll pin pairs capable of reference sync support.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250626135219.1769350-4-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define function for reference sync pin registration and callback ops to
set/get current feature state.
Implement netlink handler to fill netlink messages with reference sync
pin configuration of capable pins (pin-get).
Implement netlink handler to call proper ops and configure reference
sync pin state (pin-set).
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250626135219.1769350-3-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new netlink attribute to allow user space configuration of reference
sync pin pairs, where both pins are used to provide one clock signal
consisting of both: base frequency and sync signal.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250626135219.1769350-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the NGR 200 Xbox 360 to the list of recognized controllers.
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250608060517.14967-1-niltonperimneto@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: remaining TSPLL cleanups
These are the remaining patches from the "ice: Separate TSPLL from PTP
and cleanup" series [1] with control flow macros removed. What remains
are cleanups and some minor improvements.
[1] https://lore.kernel.org/netdev/20250618174231.3100231-1-anthony.l.nguyen@intel.com/
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: default to TIME_REF instead of TXCO on E825-C
ice: move TSPLL init calls to ice_ptp.c
ice: fall back to TCXO on TSPLL lock fail
ice: wait before enabling TSPLL
ice: add multiple TSPLL helpers
ice: use bitfields instead of unions for CGU regs
ice: read TSPLL registers again before reporting status
ice: clear time_sync_en field for E825-C during reprogramming
====================
Link: https://patch.msgid.link/20250626162921.1173068-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Rx rings are filled with Rx buffers. Which are supposed to fit
packet headers (or MTU if HW-GRO is disabled). The aggregation buffers
are filled with "device pages". Adjust the sizes of the page pool
recycling ring appropriately, based on ratio of the size of the
buffer on given ring vs system page size. Otherwise on a system
with 64kB pages we end up with >700MB of memory sitting in every
single page pool cache.
Correct the size calculation for the head_pool. Since the buffers
there are always small I'm pretty sure I meant to cap the size
at 1k, rather than make it the lowest possible size. With 64k pages
1k cache with a 1k ring is 64x larger than we need.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250626165441.4125047-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TRF7970a device is sensitive to RF disturbances, which can make it
hard to pass some EMC immunity tests. By reducing the RX antenna gain,
the device becomes less sensitive to EMC disturbances, as a trade-off
against antenna performance.
Add a device tree option to select RX gain reduction to improve EMC
performance.
Selecting a communication standard in the ISO control register resets
the RX antenna gain settings. Therefore set the RX gain reduction
everytime the ISO control register changes, when the option is used.
Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250626141242.3749958-3-paul.geurts@prodrive-technologies.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bo->size is redundant because the base GEM object already has a size
field with the same value. Drop bo->size and use the base GEM object’s
size instead. While at it, introduce xe_bo_size() to abstract the BO
size.
v2:
- Fix typo in kernel doc (Ashutosh)
- Fix kunit (CI)
- Fix line wrap (Checkpatch)
v3:
- Fix sriov build (CI)
v4:
- Fix display build (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20250625144128.2827577-1-matthew.brost@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc4:
- Fix function signature of drm_writeback_connector_cleanup.
- Use correct HDMI audio bridge in drm_connector_hdmi_audio_init.
- Make HPD work on SN65DSI86.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/3dd1d5e1-73b6-4b0c-a208-f7d6235cf530@linux.intel.com
|
|
interface creation
During interface creation, following print is observed on the console -
Timeout while waiting for regulatory update
This occurs due to commit 906619a00967 ("wifi: ath12k: handle regulatory
hints during mac registration"), which introduced a completion mechanism to
synchronize the regulatory update process. The intent behind this change is
to coordinate the timing between when the firmware sends regulatory data to
the driver and when the driver processes that data.
However, during interface addition, if the 6 GHz band is active, the driver
invokes ath12k_regd_update() to apply the appropriate 6 GHz power mode
regulatory settings. At this point, there is no interaction with the
firmware, so the completion object is not reinitialized. As a result,
wait_for_completion() eventually times out, leading to the observed error
log message.
Hence to fix this, move all complete() on regd_update_completed to
complete_all().
The complete() function signals only once, causing any subsequent waits
without reinitialization to timeout. In this scenario, since waiting is
unnecessary, complete_all() can be used instead, ensuring that subsequent
calls to wait without reinitialization will simply bail out and not
actually wait. This approach is ideal because if the firmware is not
involved, there is no need to wait for the completion event. However, if
the firmware is involved, it is guaranteed that the completion will be
reinitialized, and thus, it would wait.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Tested-by: Kang Yang <kang.yang@oss.qualcomm.com>
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 906619a00967 ("wifi: ath12k: handle regulatory hints during mac registration")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250626-fix_timeout_during_interface_creation-v1-1-90a7fdc222d4@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new TRAILING_OVERLAP() helper to fix a dozen instances of
the following type of warning:
drivers/acpi/nfit/intel.c:692:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/aF7pF4kej8VQapyR@kspp
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Not all errors that occur in xpad_try_sending_next_out_packet() are
IO errors. Pass up the error code to the caller so that it can
decide what to do.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250609014718.236827-3-superm1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When a device supporting xpad is disconnected it's expected that a
URB will fail to transmit.
Only show an error message when the error isn't -ENODEV.
Fixes: 7fc595f4c0263 ("Input: xpad - correctly handle concurrent LED and FF requests")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250609014718.236827-2-superm1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a commit that attempted to fix a memory leak in an error code
path and introduced a different issue (Zhe Qiao)"
* tag 'acpi-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()"
|
|
The 'icc_bw_lock' mutex is introduced in commit af42269c3523
("interconnect: Fix locking for runpm vs reclaim") in order to decouple
serialization of bw aggregation from codepaths that require memory
allocation.
However commit d30f83d278a9 ("interconnect: core: Add dynamic id
allocation support") added a devm_kasprintf() call into a path protected
by the 'icc_bw_lock' which causes the following lockdep warning on
machines like the Lenovo ThinkPad X13s:
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3 #15 Not tainted
------------------------------------------------------
(udev-worker)/342 is trying to acquire lock:
ffffb973f7ec4638 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_node_track_caller_noprof+0xa0/0x3e0
but task is already holding lock:
ffffb973f7f7f0e8 (icc_bw_lock){+.+.}-{4:4}, at: icc_node_add+0x44/0x154
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (icc_bw_lock){+.+.}-{4:4}:
icc_init+0x48/0x108
do_one_initcall+0x64/0x30c
kernel_init_freeable+0x27c/0x500
kernel_init+0x20/0x1d8
ret_from_fork+0x10/0x20
-> #0 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x136c/0x2114
lock_acquire+0x1c8/0x354
fs_reclaim_acquire+0x74/0xa8
__kmalloc_node_track_caller_noprof+0xa0/0x3e0
devm_kmalloc+0x54/0x124
devm_kvasprintf+0x74/0xd4
devm_kasprintf+0x58/0x80
icc_node_add+0xb4/0x154
qcom_osm_l3_probe+0x20c/0x314 [icc_osm_l3]
platform_probe+0x68/0xd8
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x160
driver_probe_device+0x40/0x110
__driver_attach+0xfc/0x208
bus_for_each_dev+0x74/0xd0
driver_attach+0x24/0x30
bus_add_driver+0x110/0x234
driver_register+0x60/0x128
__platform_driver_register+0x24/0x30
osm_l3_driver_init+0x20/0x1000 [icc_osm_l3]
do_one_initcall+0x64/0x30c
do_init_module+0x58/0x23c
load_module+0x1df8/0x1f70
init_module_from_file+0x88/0xc4
idempotent_init_module+0x188/0x280
__arm64_sys_finit_module+0x6c/0xd8
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x158
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(icc_bw_lock);
lock(fs_reclaim);
lock(icc_bw_lock);
lock(fs_reclaim);
*** DEADLOCK ***
The icc_node_add() functions is not designed to fail, and as such it
should not do any memory allocation. In order to avoid this, add a new
helper function for the name generation to be called by drivers which
are using the new dynamic id feature.
Fixes: d30f83d278a9 ("interconnect: core: Add dynamic id allocation support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20250625-icc-bw-lockdep-v3-1-2b8f8b8987c4@gmail.com
Co-developed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250627075854.26943-1-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The Dynamic Inhibit Context Switch is an optimization aimed at reducing
the amount of time the HW is stuck waiting on an unsatisfied semaphore.
When this optimization is enabled, the GuC will dynamically modify the
CTX_CTRL_INHIBIT_SYN_CTX_SWITCH in the CTX_CONTEXT_CONTROL register of
LRCs to enable immediate switching out on an unsatisfied semaphore wait
when multiple contexts are competing for time on the same engine.
This feature is available on recent HW from GuC 70.40.1 onwards and it
is enabled via a per-VF feature opt-in.
v2: rebase
v3: switch to using guc_buf_cache instead of dedicated alloc
v4: add helper to check for feature availability (Michal), don't enable
if multi-lrc is possible.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250625205405.1653212-4-daniele.ceraolospurio@intel.com
|
|
On newer HW (Xe2 onwards + PVC) it is possible to get extra information
when a CAT error occurs, specifically a dword reporting the error type.
To enable this extra reporting, we need to opt-in with the GuC, which is
done via a specific per-VF feature opt-in H2G.
On platforms where the HW does not support the extra reporting, the GuC
will set the type to 0xdeadbeef, so we can keep the code simple and
opt-in to the feature on every platform and then just discard the data
if it is invalid.
Note that on native/PF we're guaranteed that the opt in is available
because we don't support any GuC old enough to not have it, but if we're
a VF we might be running on a non-XE PF with an older GuC, so we need to
handle that case. We can re-use the invalid type above to handle this
scenario the same way as if the feature was not supported in HW.
Given that this patch is the first user of the guc_buf_cache on native
and VF, it also extends that feature to non-PF use-cases.
v2: simpler print for the error type (John), rebase
v3: use guc_buf_cache instead of new alloc, simpler doc (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250625205405.1653212-3-daniele.ceraolospurio@intel.com
|
|
The __packed attribute introduces potential unaligned memory accesses
and endianness portability issues. Instead of relying on compiler-specific
packing, it's much better to explicitly fill structure gaps using padding
fields, ensuring natural alignment.
Since all previously __packed structures already enforce proper alignment
through manual padding, the __packed qualifiers are unnecessary and can be
safely removed.
Signed-off-by: Yi Sun <yi.sun@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404053614.3096769-1-yi.sun@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Reuse reset-simple driver for the Sophgo CV1800B reset generator.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250617070144.1149926-3-inochiama@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20250611-rst-mpfs-aux-v1-1-c86534b473c3@baylibre.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Fix trivial typo in the Kconfig entry for RESET_TH1520.
Fixes: 4a65326311ab ("reset: thead: Add TH1520 reset controller driver")
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250601181000.166088-1-drew@pdp7.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Pull block fixes from Jens Axboe:
- Fixes for ublk:
- fix C++ narrowing warnings in the uapi header
- update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header
- fix for the ublk ->queue_rqs() implementation, limiting a batch
to just the specific task AND ring
- ublk_get_data() error handling fix
- sanity check more arguments in ublk_ctrl_add_dev()
- selftest addition
- NVMe pull request via Christoph:
- reset delayed remove_work after reconnect
- fix atomic write size validation
- Fix for a warning introduced in bdev_count_inflight_rw() in this
merge window
* tag 'block-6.16-20250626' of git://git.kernel.dk/linux:
block: fix false warning in bdev_count_inflight_rw()
ublk: sanity check add_dev input for underflow
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
ublk: setup ublk_io correctly in case of ublk_get_data() failure
ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
ublk: fix narrowing warnings in UAPI header
selftests: ublk: don't take same backing file for more than one ublk devices
ublk: build batch from IOs in same io_ring_ctx and io task
|
|
Add support for the resets on Canaan Kendryte K230 SoC. The driver
support CPU0, CPU1, L2 cache flush, hardware auto clear and software
clear resets.
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-2-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
No driver uses it now, remove the core code.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This driver just uses a constant, put it in domain_alloc_paging and use
the domain's value instead of ops during finalise.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/0-v1-662aad101e51+45-iommu_rm_ops_pgsize_msm_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Use the correct DMI identifier for ASUSPRO-D840SA LPM quirk such that
the quirk actually gets applied (me)
* tag 'ata-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix incorrectly dropped dereferencing of the stack nth entry
introduced with a previous KASAN false positive fix
- Use a proper memdup_array_user() helper to prevent overflow in a
protected key size calculation
* tag 's390-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: Fix pointer dereferencing in regs_get_kernel_stack_nth()
s390/pkey: Prevent overflow in size calculation for memdup_user()
|
|
Fix misspelling reported by codespell.
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://patch.msgid.link/20250522205701.393612-1-sumanth.gavini@yahoo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Fix "trasmitting" to "transmitting"
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://patch.msgid.link/20250521055411.288724-1-sumanth.gavini@yahoo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Fix "busses" to "buses"
Fix "Measurments" to "Measurements"
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://patch.msgid.link/20250521053323.284845-1-sumanth.gavini@yahoo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Only set PMI fields if the screen_info's Vesa PM segment has been
set. Vesa PMI is the power-management interface. It also provides
means to set the color palette. The interface is optional, so not
all VESA graphics cards support it. Print vesafb's warning [1] if
the hardware palette cannot be set at all.
If unsupported the field PrimaryPalette in struct vesadrm.pmi is
NULL, which results in a segmentation fault. Happens with qemu's
Cirrus emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 814d270b31d2 ("drm/sysfb: vesadrm: Add gamma correction")
Link: https://elixir.bootlin.com/linux/v6.15/source/drivers/video/fbdev/vesafb.c#L375 # 1
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250617140944.142392-1-tzimmermann@suse.de
|
|
Move big-endian support from drm_fb_xrgb8888_to_rgb565() into the new
helper drm_xrgb8888_to_rgb565be(). The functionality is required for
displays with big-endian byte order. Update all callers.
With the change applied, drm_fb_xrgb8888_to_rgb565() has the same
signature as the other conversion functions, which is required for
further updates to drm_fb_blit(). Also makes the format-conversion
helper available to panic handlers, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250625114911.1121301-1-tzimmermann@suse.de
|
