| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The fpfd_max frequency should be set to 450 MHz instead of 300 MHz.
Well, it actually depends on the platform speed grade but we are being
conservative for ultrascale so let's be consistent. In a following
change we will set these limits at runtime.
Fixes: 0e646c52cf0e ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250519-dev-axi-clkgen-limits-v6-1-bc4b3b61d1d4@analog.com
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The dev_dbg() message in cxl_set_ecs_threshold() used %d for
an unsigned value, which could lead to incorrect logging.
Update the format specifier to %u to match variable type.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com?>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250622183919.4156343-1-alok.a.tiwari@oracle.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
mutex_lock_io() differs from mutex_lock() in that it may call
io_schedule() when a task must sleep waiting for the lock. This
distinction only makes sense in block I/O or memory reclaim paths,
where giving I/O a chance to make progress is useful.
At this call site, cxl_pci_mbox_send(), the mutex protects an MMIO
mailbox. The task holding the lock is not blocking I/O progress, so
calling io_schedule(), as mutex_lock_io() may do, has no practical
effect.
Although there is no functional change, using the correct locking
primitive, that more accurately reflects the semantics and intended
use of the lock, improves code clarity and avoids misleading readers
and tools.
[ dj: Dropped fixes tag, no need to backport ]
Reported-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Closes: https://lore.kernel.org/linux-cxl/0d2af1e8-7f1b-438c-a090-fd366c8c63e0@oracle.com/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250529205117.1990465-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
UBLK_IO_FLAG_ACTIVE and UBLK_IO_FLAG_OWNED_BY_SRV are mutually
exclusive. So just check that UBLK_IO_FLAG_OWNED_BY_SRV is set in
__ublk_ch_uring_cmd(); that implies UBLK_IO_FLAG_ACTIVE is unset.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-7-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The variable is computed from a simple expression and used once, so just
replace it with the expression.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-6-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check for UBLK_IO_FETCH_REQ early in __ublk_ch_uring_cmd() and skip the
rest of the checks in this case. This allows removing the checks for
NULL io->task and UBLK_IO_FLAG_OWNED_BY_SRV unset in io->flags, which
are only allowed for FETCH.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-5-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for skipping some of the other checks for certain IO
opcodes, move the cmd_op check earlier.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__ublk_check_and_get_req() attempts to atomically look up the struct
request for a ublk I/O and take a reference on it. However, the request
can be freed between the lookup on the tagset in blk_mq_tag_to_rq() and
the increment of its reference count in ublk_get_req_ref(), for example
if an elevator switch happens concurrently.
Fix the potential use after free by moving the reference count from
ublk_rq_data to ublk_io. Move the fields buf_index and buf_ctx_handle
too to reduce the number of cache lines touched when dispatching and
completing a ublk I/O, allowing ublk_rq_data to be removed entirely.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 62fe99cef94a ("ublk: add read()/write() support for ublk char device")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct ublk_device's __queues points to an allocation with up to
UBLK_MAX_NR_QUEUES (4096) queues, each of which have:
- struct ublk_queue (48 bytes)
- Tail array of up to UBLK_MAX_QUEUE_DEPTH (4096) struct ublk_io's,
32 bytes each
This means the full allocation can exceed 512 MB, which may well be
impossible to service with contiguous physical pages. Switch to
kvcalloc() and kvfree(), since there is no need for physically
contiguous memory.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250620151008.3976463-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current use of an always_inline helper is a bit convoluted.
Instead use macros that represent the arithmetics used for building
up the PRP chain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Having a define in kiB units is a bit weird. Also update the
comment now that there is not scatterlist limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the blk_rq_dma_map API to DMA map requests instead of scatterlists.
This removes the need to allocate a scatterlist covering every segment,
and thus the overall transfer length limit based on the scatterlist
allocation.
Instead the DMA mapping is done by iterating the bio_vec chain in the
request directly. The unmap is handled differently depending on how
we mapped:
- when using an IOMMU only a single IOVA is used, and it is stored in
iova_state
- for direct mappings that don't use swiotlb and are cache coherent,
unmap is not needed at all
- for direct mappings that are not cache coherent or use swiotlb, the
physical addresses are rebuild from the PRPs or SGL segments
The latter unfortunately adds a fair amount of code to the driver, but
it is code not used in the fast path.
The conversion only covers the data mapping path, and still uses a
scatterlist for the multi-segment metadata case. I plan to convert that
as soon as we have good test coverage for the multi-segment metadata
path.
Thanks to Chaitanya Kulkarni for an initial attempt at a new DMA API
conversion for nvme-pci, Kanchan Joshi for bringing back the single
segment optimization, Leon Romanovsky for shepherding this through a
gazillion rebases and Nitesh Shetty for various improvements.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The call chain in the prep_rq and completion paths passes around a lot
of nvme_dev, nvme_queue and nvme_command arguments that can be trivially
derived from the passed in struct request. Remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvme_setup_prp_simple and nvme_setup_sgl_simple share a lot of logic.
Merge them into a single helper that makes use of the previously added
use_sgl tristate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250625113531.522027-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the average segment size into a separate helper, and return a
tristate to distinguish the case where can use SGL vs where we have to
use SGLs. This will allow the simplify the code and make more efficient
decisions in follow on changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250625113531.522027-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
DM targets must not split zone append and write operations using
dm_accept_partial_bio() as doing so is forbidden for zone append BIOs,
breaks zone append emulation using regular write BIOs and potentially
creates deadlock situations with queue freeze operations.
Modify dm_accept_partial_bio() to add missing BUG_ON() checks for all
these cases, that is, check that the BIO is a write or write zeroes
operation. This change packs all the zone related checks together under
a static_branch_unlikely(&zoned_enabled) and done only if the target is
a zoned device.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250625093327.548866-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Read and write operations issued to a dm-crypt target may be split
according to the dm-crypt internal limits defined by the max_read_size
and max_write_size module parameters (default is 128 KB). The intent is
to improve processing time of large BIOs by splitting them into smaller
operations that can be parallelized on different CPUs.
For zoned dm-crypt targets, this BIO splitting is still done but without
the parallel execution to ensure that the issuing order of write
operations to the underlying devices remains sequential. However, the
splitting itself causes other problems:
1) Since dm-crypt relies on the block layer zone write plugging to
handle zone append emulation using regular write operations, the
reminder of a split write BIO will always be plugged into the target
zone write plugged. Once the on-going write BIO finishes, this
reminder BIO is unplugged and issued from the zone write plug work.
If this reminder BIO itself needs to be split, the reminder will be
re-issued and plugged again, but that causes a call to a
blk_queue_enter(), which may block if a queue freeze operation was
initiated. This results in a deadlock as DM submission still holds
BIOs that the queue freeze side is waiting for.
2) dm-crypt relies on the emulation done by the block layer using
regular write operations for processing zone append operations. This
still requires to properly return the written sector as the BIO
sector of the original BIO. However, this can be done correctly only
and only if there is a single clone BIO used for processing the
original zone append operation issued by the user. If the size of a
zone append operation is larger than dm-crypt max_write_size, then
the orginal BIO will be split and processed as a chain of regular
write operations. Such chaining result in an incorrect written sector
being returned to the zone append issuer using the original BIO
sector. This in turn results in file system data corruptions using
xfs or btrfs.
Fix this by modifying get_max_request_size() to always return the size
of the BIO to avoid it being split with dm_accpet_partial_bio() in
crypt_map(). get_max_request_size() is renamed to
get_max_request_sectors() to clarify the unit of the value returned
and its interface is changed to take a struct dm_target pointer and a
pointer to the struct bio being processed. In addition to this change,
to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt
device max_hw_sectors limit to be at most
BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture).
This forces DM core to split write BIOs before passing them to
crypt_map(), and thus guaranteeing that dm-crypt can always accept an
entire write BIO without needing to split it.
This change does not have any effect on the read path of dm-crypt. Read
operations can still be split and the BIO fragments processed in
parallel. There is also no impact on the performance of the write path
given that all zone write BIOs were already processed inline instead of
in parallel.
This change also does not affect in any way regular dm-crypt block
devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250625093327.548866-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Probing peripherals in the AON and PERI domains, such as the PVT thermal
sensor and the PWM controller, can lead to boot hangs or unresponsive
devices on the LPi4A board. The root cause is that their parent bus
clocks ('CLK_CPU2AON_X2H' and the 'CLK_PERISYS_APB' clocks) are
automatically gated by the kernel's power-saving mechanisms when the bus
is perceived as idle.
Alternative solutions were investigated, including modeling the parent
bus in the Device Tree with 'simple-pm-bus' or refactoring the clock
driver's parentage. The 'simple-pm-bus' approach is not viable due to
the lack of defined bus address ranges in the hardware manual and its
creation of improper dependencies on the 'pm_runtime' API for consumer
drivers.
Therefore, applying the'`CLK_IGNORE_UNUSED' flag directly to the
essential bus clocks is the most direct and targeted fix. This prevents
the kernel from auto-gating these buses and ensures peripherals remain
accessible.
This change fixes the boot hang associated with the PVT sensor and
resolves the functional issues with the PWM controller.
Link: https://lore.kernel.org/all/9e8a12db-236d-474c-b110-b3be96edf057@samsung.com/ [1]
Reviewed-by: Drew Fustini <drew@pdp7.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
|
|
Users reported insufficient error information for debugging during
firmware update failures on certain platforms. Add verbose error logs
in the error code path to enhance debuggability.
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250604022956.3723438-1-yu.c.chen@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Both pwm_config() and pwm_enable() are wrappers around
pwm_apply_might_sleep(). Instead of calling this function twice only
call it once without an intermediate step.
Setup the PWM in max8997_haptic_enable() only where it was enabled
historically. max8997_haptic_set_duty_cycle() is renamed accordingly to
make it clear this function is only about the internal setup now.
pwm_config() was called earlier back then, but that call has no effect
on the hardware when the PWM is disabled, so delaying this configuration
doesn't make a difference.
As pwm_apply_might_sleep() is used now defining the whole state of the
PWM, the call to pwm_apply_args() in .probe() can be dropped now, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250630093718.2062359-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add Bartlett Lake to the list of supported processors in the RAPL
common driver.
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Qiao Wei <wei.qiao@intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Panther Lake to the list of processors where PL4 is supported.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250625020522.253548-1-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PL1 cannot be disabled on some platforms. The ENABLE bit is still set
after software clears it. This behavior leads to a scenario where, upon
user request to disable the Power Limit through the powercap sysfs, the
ENABLE bit remains set while the CLAMPING bit is inadvertently cleared.
According to the Intel Software Developer's Manual, the CLAMPING bit,
"When set, allows the processor to go below the OS requested P states in
order to maintain the power below specified Platform Power Limit value."
Thus this means the system may operate at higher power levels than
intended on such platforms.
Enhance the code to check ENABLE bit after writing to it, and stop
further processing if ENABLE bit cannot be changed.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 2d281d8196e3 ("PowerCap: Introduce Intel RAPL power capping driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250619071340.384782-1-rui.zhang@intel.com
[ rjw: Use str_enabled_disabled() instead of open-coded equivalent ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
MEI GSC interrupt comes from i915. It has top half and bottom half.
Top half is called from i915 interrupt handler. It should be in
irq disabled context.
With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC
top half might be in threaded IRQ context. generic_handle_irq_safe API
could be called from either IRQ or process context, it disables local
IRQ then calls MEI GSC interrupt top half.
This change fixes A380/A770 GPU boot hang issue with RT kernel.
Fixes: 1e3dc1d8622b ("drm/i915/gsc: add gsc as a mei auxiliary device")
Tested-by: Furong Zhou <furong.zhou@intel.com>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Link: https://lore.kernel.org/r/20250425151108.643649-1-junxiao.chang@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
[Why]
OLED panels can be fully off, but this behavior is unexpected.
[How]
Ensure that minimum luminance is at least 1.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4338
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 51496c7737d06a74b599d0aa7974c3d5a4b1162e)
|
|
[WHY]
Rounding error sometimes occurs when the refresh rate is equal to a panel's
max refresh rate, causing HDMI compliance failures.
[HOW]
Added a case so that we round up to avoid v_total_min to be below a panel's
minimum bound.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Harold Sun <Harold.Sun@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fe7645d22bc0f7c1558296538ec49987bf268ef6)
|
|
These were missed when support was added for other generations.
The callbacks are called unconditionally so we need to make
sure all generations have them.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4304
Link: https://github.com/ROCm/ROCm/issues/4965
Fixes: bac38ca8c475 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Cc: Jonathan Kim <jonathan.kim@amd.com>
Reported-by: Johl Brown <johlbrown@gmail.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e9d17a5dcf1242e9518e461d8e63ad35240e49e)
Cc: stable@vger.kernel.org
|
|
patch dd64956685fa ("drm/amdgpu: Remove duplicated "context still
alive" check") removed ctx put, which will cause amdgpu_ctx_fini()
cannot be called and then cause some finished fence that added by
amdgpu_ctx_add_fence() cannot be released and cause memleak.
Fixes: dd64956685fa ("drm/amdgpu: Remove duplicated "context still alive" check")
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8cf66089e28108dedd47e6156a48489303cf525c)
Cc: stable@vger.kernel.org
|
|
If the process is exiting, the mmput inside mmu notifier callback from
compactd or fork or numa balancing could release the last reference
of mm struct to call exit_mmap and free_pgtable, this triggers deadlock
with below backtrace.
The deadlock will leak kfd process as mmu notifier release is not called
and cause VRAM leaking.
The fix is to take mm reference mmget_non_zero when adding prange to the
deferred list to pair with mmput in deferred list work.
If prange split and add into pchild list, the pchild work_item.mm is not
used, so remove the mm parameter from svm_range_unmap_split and
svm_range_add_child.
The backtrace of hung task:
INFO: task python:348105 blocked for more than 64512 seconds.
Call Trace:
__schedule+0x1c3/0x550
schedule+0x46/0xb0
rwsem_down_write_slowpath+0x24b/0x4c0
unlink_anon_vmas+0xb1/0x1c0
free_pgtables+0xa9/0x130
exit_mmap+0xbc/0x1a0
mmput+0x5a/0x140
svm_range_cpu_invalidate_pagetables+0x2b/0x40 [amdgpu]
mn_itree_invalidate+0x72/0xc0
__mmu_notifier_invalidate_range_start+0x48/0x60
try_to_unmap_one+0x10fa/0x1400
rmap_walk_anon+0x196/0x460
try_to_unmap+0xbb/0x210
migrate_page_unmap+0x54d/0x7e0
migrate_pages_batch+0x1c3/0xae0
migrate_pages_sync+0x98/0x240
migrate_pages+0x25c/0x520
compact_zone+0x29d/0x590
compact_zone_order+0xb6/0xf0
try_to_compact_pages+0xbe/0x220
__alloc_pages_direct_compact+0x96/0x1a0
__alloc_pages_slowpath+0x410/0x930
__alloc_pages_nodemask+0x3a9/0x3e0
do_huge_pmd_anonymous_page+0xd7/0x3e0
__handle_mm_fault+0x5e3/0x5f0
handle_mm_fault+0xf7/0x2e0
hmm_vma_fault.isra.0+0x4d/0xa0
walk_pmd_range.isra.0+0xa8/0x310
walk_pud_range+0x167/0x240
walk_pgd_range+0x55/0x100
__walk_page_range+0x87/0x90
walk_page_range+0xf6/0x160
hmm_range_fault+0x4f/0x90
amdgpu_hmm_range_get_pages+0x123/0x230 [amdgpu]
amdgpu_ttm_tt_get_user_pages+0xb1/0x150 [amdgpu]
init_user_pages+0xb1/0x2a0 [amdgpu]
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x543/0x7d0 [amdgpu]
kfd_ioctl_alloc_memory_of_gpu+0x24c/0x4e0 [amdgpu]
kfd_ioctl+0x29d/0x500 [amdgpu]
Fixes: fa582c6f3684 ("drm/amdkfd: Use mmget_not_zero in MMU notifier")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a29e067bd38946f752b0ef855f3dfff87e77bec7)
Cc: stable@vger.kernel.org
|
|
The i2c_dw_xfer_init() function requires msgs and msg_write_idx from the
dev context to be initialized.
amd_i2c_dw_xfer_quirk() inits msgs and msgs_num, but not msg_write_idx.
This could allow an out of bounds access (of msgs).
Initialize msg_write_idx before calling i2c_dw_xfer_init().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250627143511.489570-1-michael.j.ruhl@intel.com
|
|
This got missed during SDMA 4.4.4 support.
Fixes: 968e3811c3e8 ("drm/amdgpu: add initial support for sdma444")
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 51526efe02714339ed6139f7bc348377d363200a)
Cc: stable@vger.kernel.org
|
|
Set memory mtype to UC host memory when ext-coherent
flag is set and memory is registered as a SVM allocation.
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d14fdab4778c29cfd39e62c3ce84d232b4a7d8c)
|
|
SDMA 5.x only supports engine soft reset which resets
all queues on the engine. As such, we need to suspend
KFD queues around resets like we do for SDMA 4.x.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 61feed0baa1a0d094af0e07e968b1e6e875f07d0)
|
|
device"
This reverts commit 4900454b4f819e88e9c57ed93542bf9325d7e161.
Now that nobody relies of cfg->priv containing anything useful before the
.init() callback is used, restore the previous behaviour.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-4-maz@kernel.org
|
|
On MicroChip MPFS Icicle:
microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
microchip-pcie 2000000000.pcie: Parsing ranges property...
microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000368
Current swapper/0 pgtable: 4K pagesize, 39-bit VAs, pgdp=0x00000000814f1000
[0000000000000368] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Oops [#1]
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.15.0-rc1-icicle-00003-gafc0a570bb61 #232 NONE
Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
[...]
[<ffffffff803fb8a4>] plda_pcie_setup_iomems+0xe/0x78
[<ffffffff803fc246>] mc_platform_init+0x80/0x1d2
[<ffffffff803f9c88>] pci_ecam_create+0x104/0x1e2
[<ffffffff8000adbe>] pci_host_common_init+0x120/0x228
[<ffffffff8000af42>] pci_host_common_probe+0x7c/0x8a
The initialization of driver_data was moved after the call to
gen_pci_init(), while the pci_ecam_ops.init() callback
mc_platform_init() expects it has already been initialized.
Fix this by moving the initialization of driver_data up.
Fixes: afc0a570bb613871 ("PCI: host-generic: Extract an ECAM bridge creation helper from pci_host_common_probe()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/774290708a6f0f683711914fda110742c18a7fb2.1750787223.git.geert+renesas@glider.be
Link: https://patch.msgid.link/20250625111806.4153773-2-maz@kernel.org
|
|
The apple driver relies on being able to directly find the matching root
port structure from the platform device that represents this port.
A previous hack stashed a pointer to the root port structure in the config
window private pointer, but that ended up relying on assumptions that break
other drivers.
Instead, bite the bullet and track the association as part of the driver
itself as a list of probed root ports.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-3-maz@kernel.org
|
|
After commit 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref
struct"), fb_deferred_io_init() allocates memory for info->pagerefs as
well as return an error code on failure. However the error code is
ignored here and the memory allocated could leak because of not calling
fb_deferred_io_cleanup() on the error path.
Fix them by adding the cleanup function on the error path, and handling
the error code returned by fb_deferred_io_init().
Fixes: 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref struct")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/fd2be49cfef72799f17a96d01a4c6b92770cda7d.1751207100.git.abdun.nihaal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both wifi_regd.c and ioctl_cfg80211.c define a static function
rtw_ieee80211_channel_to_frequency() with identical functionality.
Remove the function from wifi_regd.c and make it non-static in
ioctl_cfg80211.c to avoid code duplication.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function rtw_ieee80211_channel_to_frequency() in ioctl_cfg80211.c
is always called with band = NL80211_BAND_2GHZ. Remove the unnecessary
band parameter from the function and adjust its code and calls.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parameter 'band' of rtw_ieee80211_channel_to_frequency() in
wifi_regd.c is unused, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the error paths after fb_info structure is successfully allocated,
the memory allocated in fb_deferred_io_init() for info->pagerefs is not
freed. Fix that by adding the cleanup function on the error path.
Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250626172412.18355-1-abdun.nihaal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions rtw_hal_dm_deinit(), odm_CmnInfoInit_Debug(), and
odm_BasicDbgMessage() are empty, hence we can remove them to get rid of
some dead code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250628142330.58045-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adhere to Linux kernel coding style.
Reported by checkpatch:
WARNING: Comparisons should place the constant on the right side of the
test
Signed-off-by: Bryant Boatright <bryant.boatright@proton.me>
Link: https://lore.kernel.org/r/aFrzy5UdqURaTrlP@ubuntu-desk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The introduction of a padding field in the gpib_board_info_ioctl is
showing up as initialized data on the stack frame being copyied back
to userspace in function board_info_ioctl. The simplest fix is to
initialize the entire struct to zero to ensure all unassigned padding
fields are zero'd before being copied back to userspace.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Fixes: 9dde4559e939 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250623220958.280424-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call a function based on sm750_dev->revid
instead of using this indirection
Signed-off-by: Kisub Choe <kisub.choe.0x1@gmail.com>
Link: https://lore.kernel.org/r/aFWSSAcboBVi4ROh@zinc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For supporting BBM Level 2 for userspace mappings, we want to ensure
that the smmu also supports its own version of BBM Level 2. Luckily, the
smmu spec (IHI 0070G 3.21.1.3) is stricter than the aarch64 spec (DDI
0487K.a D8.16.2), so already guarantees that no aborts are raised when
BBM level 2 is claimed.
Add the feature and testing for it under arm_smmu_sva_supported().
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250625113435.26849-4-miko.lenczewski@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The commit 76c968e75715 ("Input: alps - switch to use scnprintf() to suppress
truncation warning") converted one place in the driver while the other left
untouched. Convert the other place as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630082245.1416796-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
u_boot_env_parse() calls crc32() from within a scope that has a uint32_t
variable named crc32. This works only because crc32() is actually a
macro that expands to crc32_le(). I'm planning to make it an inline
function instead, which will make the usual C scoping rules apply to it.
Therefore, update u_boot_env_parse() to be compatible with that. To do
so, just call crc32_le() directly instead of using the crc32() alias.
(An alternative would be to rename the local variable.)
Acked-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250620205027.23403-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
