| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6.
It is time to convert the Intel igc driver to the new API, so that
timestamping configuration can be removed from the ndo_eth_ioctl() path
completely.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6.
It is time to convert the Intel ice driver to the new API, so that
timestamping configuration can be removed from the ndo_eth_ioctl() path
completely.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In case of kexec call, each driver's shutdown callback is called. Handle
this call for rproc driver and shutdown/detach each core that was powered
on before. This is needed for proper Life Cycle Management of remote
processor. Otherwise on next linux boot, remote processor can't be
started due to bad refcount of power-domain managed by platform
management controller.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20250620195728.3216935-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - new code bugs:
- eth:
- txgbe: fix the issue of TX failure
- ngbe: specify IRQ vector when the number of VFs is 7
Previous releases - regressions:
- sched: always pass notifications when child class becomes empty
- ipv4: fix stat increase when udp early demux drops the packet
- bluetooth: prevent unintended pause by checking if advertising is active
- virtio: fix error reporting in virtqueue_resize
- eth:
- virtio-net:
- ensure the received length does not exceed allocated size
- fix the xsk frame's length check
- lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- bluetooth: mesh: check instances prior disabling advertising
- eth:
- idpf: convert control queue mutex to a spinlock
- dpaa2: fix xdp_rxq_info leak
- amd-xgbe: align CL37 AN sequence as per databook"
* tag 'net-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
vsock/vmci: Clear the vmci transport packet properly when initializing it
dt-bindings: net: sophgo,sg2044-dwmac: Drop status from the example
net: ngbe: specify IRQ vector when the number of VFs is 7
net: wangxun: revert the adjustment of the IRQ vector sequence
net: txgbe: request MISC IRQ in ndo_open
virtio_net: Enforce minimum TX ring size for reliability
virtio_net: Cleanup '2+MAX_SKB_FRAGS'
virtio_ring: Fix error reporting in virtqueue_resize
virtio-net: xsk: rx: fix the frame's length check
virtio-net: use the check_mergeable_len helper
virtio-net: remove redundant truesize check with PAGE_SIZE
virtio-net: ensure the received length does not exceed allocated size
net: ipv4: fix stat increase when udp early demux drops the packet
net: libwx: fix the incorrect display of the queue number
amd-xgbe: do not double read link status
net/sched: Always pass notifications when child class becomes empty
nui: Fix dma_mapping_error() check
rose: fix dangling neighbour pointers in rose_rt_device_down()
enic: fix incorrect MTU comparison in enic_change_mtu()
amd-xgbe: align CL37 AN sequence as per databook
...
|
|
Pull NVMe fixes from Christoph:
"- fix incorrect cdw15 value in passthru error logging (Alok Tiwari)
- fix memory leak of bio integrity in nvmet (Dmitry Bogdanov)
- refresh visible attrs after being checked (Eugen Hristev)
- fix suspicious RCU usage warning in the multipath code (Geliang Tang)
- correctly account for namespace head reference counter (Nilay Shroff)"
* tag 'nvme-6.16-2025-07-03' of git://git.infradead.org/nvme:
nvme-multipath: fix suspicious RCU usage warning
nvme-pci: refresh visible attrs after being checked
nvmet: fix memory leak of bio integrity
nvme: correctly account for namespace head reference counter
nvme: Fix incorrect cdw15 value in passthru error logging
|
|
The TCON clock can be parented to both the video PLL and the periph0 PLL.
Add the latter, which was missing from the list.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250701201124.812882-5-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The CSI1 MCLK clock is reported as "csi-mclk" while it is specific to
CSI1 as the name of the definition indicates. Fix it in the driver.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-4-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The CSI SCLK clock is incorrectly called CSI1 SCLK while it is used for
both the CSI0 and CSI1 interfaces and is called CSI SCLK all around the
documentation.
Fix the name in the driver, header and device-tree.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-3-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Three CCUs on the SpacemiT K1 SoC implement only resets, not clocks.
Define the CCU data for these resets so their auxiliary devices get
created.
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-5-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add a new reset_name field to the spacemit_ccu_data structure. If it is
non-null, the CCU implements a reset controller, and the name will be
used in the name for the auxiliary device that implements it.
Define a new type to hold an auxiliary device as well as the regmap
pointer that will be needed by CCU reset controllers. Set up code to
initialize and add an auxiliary device for any CCU that implements reset
functionality.
Make it optional for a CCU to implement a clock controller. This
doesn't apply to any of the existing CCUs but will for some new ones
that will be added soon.
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-4-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Move the definitions of register offsets and fields used by the SpacemiT
K1 SoC CCUs into a separate header file, so that they can be shared by
the reset driver that will be found under drivers/reset.
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-3-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The get_pd_power_uw() function can crash with a NULL pointer dereference
when em_cpu_get() returns NULL. This occurs when a CPU becomes impossible
during runtime, causing get_cpu_device() to return NULL, which propagates
through em_cpu_get() and leads to a crash when em_span_cpus() dereferences
the NULL pointer.
Add a NULL check after em_cpu_get() and return 0 if unavailable,
matching the existing fallback behavior in __dtpm_cpu_setup().
Fixes: eb82bace8931 ("powercap/drivers/dtpm: Scale the power with the load")
Signed-off-by: Sivan Zohar-Kotzer <sivany32@gmail.com>
Link: https://patch.msgid.link/20250701221355.96916-1-sivany32@gmail.com
[ rjw: Drop an excess empty code line ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Enhance the existing SCMI transfer tracepoints by including the current
in-flight transfer count in `scmi_xfer_begin` and `scmi_xfer_end`.
Introduce a new helper `scmi_inflight_count()` to retrieve the active
transfer count from the SCMI debug counters when debug is enabled.
This trace data is useful for visualizing transfer activity over time
and identifying congestion or unexpected behavior in SCMI messaging.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-4-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a new debug counter, `XFERS_INFLIGHT`, to track the number of
currently active in-flight SCMI message transfers. This helps in
understanding system behavior and diagnosing potential issues with
pending or stuck messages.
The counter is incremented when a transfer is registered as in-flight,
and decremented when it completes and is released.
It is automatically added to debugfs for visibility through SCMI debugfs.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-3-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Introduce a new `scmi_dec_count` helper to complement the existing
`scmi_inc_count`, allowing controlled decrement of SCMI debug counters.
This provides symmetry in debug counter management and enables
accurate tracking of counters that may both increase and decrease,
such as those used for in-flight message tracking.
Only active when CONFIG_ARM_SCMI_DEBUG_COUNTERS is enabled.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Philip Radford <philip.radford@arm.com>
Message-Id: <20250630105544.531723-2-philip.radford@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Commit ff67592cbdfc ("mtd: spi-nor: Introduce spi_nor_set_mtd_info()")
moved all initialization of the mtd fields at the end of spi_nor_scan().
Normally, the mtd info is only needed for the mtd ops on the device,
with one exception: spi_nor_try_unlock_all(), which will also make use
of the mtd->size parameter. With that commit, the size will always be
zero because it is not initialized. Fix that by not using the size of
the mtd_info struct, but use the size from struct spi_nor_flash_parameter.
Fixes: ff67592cbdfc ("mtd: spi-nor: Introduce spi_nor_set_mtd_info()")
Cc: stable@vger.kernel.org
Reported-by: Jean-Marc Ranger <jmranger@hotmail.com>
Closes: https://lore.kernel.org/all/DM6PR06MB561177323DC5207E34AF2A06C547A@DM6PR06MB5611.namprd06.prod.outlook.com/
Tested-by: Jean-Marc Ranger <jmranger@hotmail.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250701140426.2355182-1-mwalle@kernel.org
|
|
The PCI bus type does not expect its runtime PM suspend callback
function, pci_pm_runtime_suspend(), to be invoked at all during system-
wide suspend and resume, and it does not expect its runtime resume
callback function, pci_pm_runtime_resume(), to be invoked at any point
when runtime PM is disabled for the given device during system-wide
suspend and resume, so make it express that expectation by setting
power.strict_midlayer for all PCI devices in pci_pm_prepare() and
clear it in pci_pm_complete().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1925097.atdPhlSkOF@rjwysocki.net
|
|
The ACPI general PM domain and the LPSS PM domain do not expect their
mid-layer runtime PM suspend callbacks to be invoked at all during
system-wide suspend and resume and they do not expect their runtime
resume callbacks to be invoked at any point when runtime PM is disabled
for the given device during system suspend and resume, so make
acpi_subsys_prepare() set power.strict_midlayer for the given device
to express that expectation and make acpi_subsys_complete() clear it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/4463062.ejJDZkT8p0@rjwysocki.net
|
|
Add a new flag, called strict_midlayer, to struct dev_pm_info, along
with helper functions for updating and reading its value, to allow
middle layer code that provides proper callbacks for device suspend-
resume during system-wide PM transitions to let pm_runtime_force_suspend()
and and pm_runtime_force_resume() know that they should only invoke
runtime PM callbacks coming from the device's driver.
Namely, if this flag is set, pm_runtime_force_suspend() and
and pm_runtime_force_resume() will invoke runtime PM callbacks
provided by the device's driver directly with the assumption that
they have been called via a middle layer callback for device suspend
or resume, respectively.
For instance, acpi_general_pm_domain provides specific
callback functions for system suspend, acpi_subsys_suspend(),
acpi_subsys_suspend_late() and acpi_subsys_suspend_noirq(), and
it does not expect its runtime suspend callback function,
acpi_subsys_runtime_suspend(), to be invoked at any point during
system suspend. In particular, it does not expect that function
to be called from within any of the system suspend callback functions
mentioned above which would happen if a device driver collaborating
with acpi_general_pm_domain used pm_runtime_force_suspend() as its
callback function for any system suspend phase later than "prepare".
The new flag allows this expectation of acpi_general_pm_domain to
be formally expressed, which is going to be done subsequently.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/24017035.6Emhk5qWAg@rjwysocki.net
|
|
Add a special function for computing the address of the runtime PM
callback given by an offset relative to the start of the device
driver's struct dev_pm_ops and use it to obtain the driver callback
in __rpm_get_callback().
Also put the shared part of the callback address computation into a
separate helper function to avoid code duplication and explicit
pointer type casts.
The new __rpm_get_driver_callback() will be used subsequently for
implementing callback lookup in pm_runtime_force_suspend/resume().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2054356.usQuhbGJ8B@rjwysocki.net
|
|
Add a power.needs_force_resume check to pm_runtime_force_suspend() so
it need not rely on the runtime PM status of the device when deciding
whether or not to return early.
With the new check in place, pm_runtime_force_suspend() will also skip
devices with the runtime PM status equal to RPM_ACTIVE if they have
power.needs_force_resume set, so it won't need to change the RPM
status of the device to RPM_SUSPENDED in addition to setting
power.needs_force_resume in the case when pm_runtime_need_not_resume()
return false.
That allows the runtime PM status update to be removed from
pm_runtime_force_resume(), so the runtime PM status remains unchanged
between the pm_runtime_force_suspend() and pm_runtime_force_resume()
calls.
This change potentially unbreaks drivers that call pm_runtime_force_suspend()
from their ->remove() callbacks because currently, if the device being
unbound from its driver has a parent with enabled runtime PM and/or
(possibly) device links respecting runtime PM to suppliers, and it is
RPM_ACTIVE when the remove takes place, pm_runtime_force_suspend() will
not drop the parent's child count and the suppliers' runtime PM usage
counters after force-suspending the device unless pm_runtime_need_not_resume()
returns 'true' for it. Moreover, because pm_runtime_force_suspend()
changes the device's runtime PM status to RPM_SUSPENDED, in the above
case pm_runtime_reinit() will not cause those counters to drop, so they
will remain nonzero forever effectively preventing the devices in
question from runtime-suspending going forward.
This change is also needed for pm_runtime_force_suspend() to work
with PCI PM and ACPI PM after subsequent changes. Namely, say
DPM_FLAG_SMART_SUSPEND is set for a PCI device and its driver uses
pm_runtime_force_suspend() as its ->suspend() callback. If
pm_runtime_force_suspend() changed the runtime PM status of the
device to RPM_SUSPENDED, pci_pm_suspend_noirq() would skip the
device due to the dev_pm_skip_suspend() check.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1855933.VLH7GnMWUR@rjwysocki.net
|
|
Clear power.needs_force_resume in pm_runtime_reinit() in case it has
been set by pm_runtime_force_suspend() invoked from a driver remove
callback.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/9495163.CDJkKcVGEf@rjwysocki.net
|
|
Curently, drivers using pm_runtime_force_suspend/resume() cannot set
DPM_FLAG_SMART_SUSPEND because the devices with that flag set may need
to be resumed during system-wide resume regardless of whether or not
they have power.needs_force_resume set. That can happen due to a
dependency resolved at the beginning of a system-wide resume transition
(for instance, a bus type or PM domain has decided to resume a
subordinate device with DPM_FLAG_SMART_SUSPEND and its parent and
suppliers also need to be resumed).
To overcome this limitation, modify pm_runtime_force_resume() to check
the device's power.smart_suspend flag (which is set for devices with
DPM_FLAG_SMART_SUSPEND set that meet some additional requirements) and
the device's runtime PM status in addition to power.needs_force_resume.
Also change it to clear power.smart_suspend to ensure that it will not
handle the same device twice during one transition.
The underlying observation is that there are two cases in which the
device needs to be resumed by pm_runtime_force_resume(). One of them
is when the device has power.needs_force_resume set, which means that
pm_runtime_force_suspend() has suspended it and decided that it should
be resumed during the subsequent system resume. The other one is when
power.smart_suspend is set and the device's runtume PM status is
RPM_ACTIVE.
Update kerneldoc comments in accordance with the code changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3662906.iIbC2pHGDl@rjwysocki.net
|
|
Since pm_runtime_force_resume() and pm_runtime_need_not_resume() are only
needed for handling system-wide PM transitions, there is no reason to
compile them in if CONFIG_PM_SLEEP is unset.
Accordingly, move them under CONFIG_PM_SLEEP and make the static
inline stub for pm_runtime_force_resume() return an error to indicate
that it should not be used outside CONFIG_PM_SLEEP.
Putting pm_runtime_force_resume() also allows subsequent changes to
be more straightforward because this function is going to access a
device PM flag that is only defined when CONFIG_PM_SLEEP is set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3384523.aeNJFYEL58@rjwysocki.net
|
|
Since power.needs_force_resume is a bool field, use true/false
as its values instead of 1/0, respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2254988.irdbgypaU6@rjwysocki.net
|
|
Infineon SEMPER flash family does not support E9h opcode as Exit 4-byte
mode (EX4B). Therefore, params->set_4byte_addr_mode is not determined by
BFPT parse. Fixup it up by introducing vendor specific EX4B opcode (B8h)
and function.
Fixes: c87c9b11c53ce ("mtd: spi-nor: spansion: Determine current address mode")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250612074427.22263-1-Takahiro.Kuwano@infineon.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.17
- Add SPI FLASH, camera, and Ethernet support on the RZ/G3E SoC and/or
the RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add Ethernet, USB2, and PMIC support on the RZ/V2H and RZ/V2N SoCs
and EVK boards,
- Add timer, I2C, watchdog, and GPU support on the RZ/V2N SoC and the
RZ/V2N EVK board,
- Add debug LED support for the RZN1D-DB development board,
- Improve PCIe clock description on the Retronix Sparrow Hawk board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r9a09g047: Add GBETH nodes
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Rename fixed regulator node names
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Add RAA215300 PMIC
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add RAA215300 PMIC
arm64: dts: renesas: rcar-gen3: Add bootph-all to sysinfo EEPROMs
arm64: dts: renesas: sparrow-hawk: Describe split PCIe clock
arm64: dts: renesas: r8a779g0: Describe PCIe root ports
arm64: dts: renesas: ebisu: Add CAN0 support
ARM: dts: renesas: r9a06g032: Add second clock input to RTC
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable USB2.0 support
arm64: dts: renesas: r9a09g056: Add USB2.0 support
arm64: dts: renesas: r8a779g3-sparrow-hawk: Sort DTS
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe debug LEDs
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable USB2.0 support
PCI/pwrctrl: Add optional slot clock for PCI slots
arm64: dts: renesas: r9a09g057: Add USB2.0 support
arm64: dts: renesas: r9a09g047e57-smarc: Enable CRU, CSI support
arm64: dts: renesas: renesas-smarc2: Enable I2C0 node
arm64: dts: renesas: r9a09g047e57-smarc: Add I2C0 pincontrol
arm64: dts: renesas: r9a09g047: Add CRU, CSI2 nodes
...
Link: https://lore.kernel.org/r/cover.1751026664.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Avoid starting "async" suspend processing upfront for devices that have
consumers and start "async" suspend processing for a device's suppliers
right after suspending the device itself.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/3384525.44csPzL39Z@rjwysocki.net
|
|
Avoid starting "async" resume processing upfront for devices that have
suppliers and start "async" resume processing for a device's consumers
right after resuming the device itself.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/3378088.aeNJFYEL58@rjwysocki.net
|
|
'struct spi_nor_fixups' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
23304 13168 0 36472 8e78 drivers/mtd/spi-nor/micron-st.o
After:
=====
text data bss dec hex filename
23560 12912 0 36472 8e78 drivers/mtd/spi-nor/micron-st.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/aa641732ba707ce3690217825c3ca7373ffde4f9.1748191985.git.christophe.jaillet@wanadoo.fr
|
|
According to POSIX spec, EAGAIN returned by read with O_NONBLOCK set
means the read would block. Hence, the common implementation in
nonblocking model will poll the file when the nonblocking read returns
EAGAIN. However, when the target file is thermal zone, this mechanism
will totally malfunction because thermal zone doesn't implement sysfs
notification and thus the poll will never return.
For example, the read in Golang implemnts such method and sometimes
hangs at reading some thermal zones via sysfs.
Change to return -ENODATA instead of -EAGAIN to userspace.
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://patch.msgid.link/20250620-temp-v3-1-6becc6aeb66c@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Our LMEM buffer objects are not cleared by default on alloc
and during VF provisioning we only setup LMTT PTEs for the
actually provisioned LMEM range. But beyond that valid range
we might leave some stale data that could either point to some
other VFs allocations or even to the PF pages.
Explicitly clear all new LMTT page to avoid the risk that a
malicious VF would try to exploit that gap.
While around add asserts to catch any undesired PTE overwrites
and low-level debug traces to track LMTT PT life-cycle.
Fixes: b1d204058218 ("drm/xe/pf: Introduce Local Memory Translation Table")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250701220052.1612-1-michal.wajdeczko@intel.com
|
|
Drop superfluous might_sleep() calls from dpm_resume(), dpm_complete(),
and dpm_prepare(). These functions already invoke primitives that
implicitly check for sleep in atomic context:
- dpm_resume() and dpm_complete() invoke mutex_lock(), which internally
triggers might_sleep().
- dpm_prepare() calls wait_for_device_probe(), which internally uses
flush_work(), and thus might_sleep().
These annotations are unnecessary and can be dropped to reduce clutter.
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Link: https://patch.msgid.link/20250617084650.341262-1-quic_zhonhan@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
A fix in the OP-TEE driver for v6.16
Fixing a sleep in atomic context in the FF-A notification callback by
adding a work queue to process in a non-atomic context.
* tag 'optee-fix-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
optee: ffa: fix sleep in atomic context
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung SoC fixes for v6.16
1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC
SNPS EUSB2 phy driver, because Kconfig entry was renamed when
changing the driver to a common one, shared with Samsung SoC, thus
defconfig lost that driver effectively.
2. Exynos ACPM: Fix timeouts happening with multiple requests.
* tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: fix timeouts on xfers handling
arm64: defconfig: update renamed PHY_SNPS_EUSB2
|
|
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/6d23d93fa1f1e65526698f97c9888fa5d12abc7b.1750860131.git.namcao@linutronix.de
|
|
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/976892e3ce64fcf52387833abee08ddfa47d2a82.1750860131.git.namcao@linutronix.de
|
|
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/ec08fea004e7c3aa18c3f5657a8cafeb1adfcc1d.1750860131.git.namcao@linutronix.de
|
|
Tidy up the code with __free. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/ff2c9460d03e44cb2946521dbae5ce800d34523e.1750860131.git.namcao@linutronix.de
|
|
Convert lock/unlock pairs to guards and tidy up the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/7886b9595aaf8e102f79364784f68dec9c49b023.1750860131.git.namcao@linutronix.de
|
|
Tidy up the coding style. Only formatting changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/3bbf719fcd974b0f52a832552b986116bdc70203.1750860131.git.namcao@linutronix.de
|
|
Switch to use the concise helper to create an MSI parent domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/3e901db1a4c87678af053019774d95b73bfb9ef9.1750860131.git.namcao@linutronix.de
|
|
Switch to use the concise helper to create an MSI parent domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/7ae78d7b7e33ad8ca1ec2ba28957546c81ba86f7.1750860131.git.namcao@linutronix.de
|
|
Now that we have a concise helper to create an MSI parent domain,
switch the IMX letter soup over to that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/all/4f05fff99b6cc5875d2f4dadd31707e2dedaafc8.1750860131.git.namcao@linutronix.de
Link: https://lore.kernel.org/all/20241204124549.607054-7-maz@kernel.org
|
|
Now that we have a concise helper to create an MSI parent domain,
switch the RISC-V letter soup over to that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/b906a38d443577de45923b335d80fc54c5638da0.1750860131.git.namcao@linutronix.de
Link: https://lore.kernel.org/all/20241204124549.607054-6-maz@kernel.org
|
|
Switch to use the concise helper to create an MSI parent domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/92a6d68db014e945337c10649a41605da05783da.1750860131.git.namcao@linutronix.de
|
|
Add Kconfig and Makefile for IPU7 driver and also update
the Makefile to build the IPU7 driver.
Also add a to-do file to list the TODOs.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The main input system driver mainly cover the basic hardware setup, v4l2
devices registration, firmware stream interfaces and interrupt handling.
Input system CSI2 receiver is exposed as a v4l2 sub-device. Each CSI2
sub-device represent one single CSI2 hardware port which be linked with
external sub-device such camera sensor by linked with ISYS CSI2's sink
pad. The CSI2 source pad is linked to the sink pad of video capture device.
Register V4L2 video device and setup the VB2 queues to support video
capture. Video streaming callback will trigger the input system driver to
construct a input system stream configuration for firmware based on data
type and stream ID and then queue buffers to firmware to do capture.
IPU7 CSI-2 D-PHY hardware is a Synopsys DWC MIPI CSI2 Rx IP, the driver
program the DPHY to receive MIPI data from camera sensors.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
IPU7 firmware defines the ABIs between firmware and software, this
patch adds a series of ABI headers.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
IPU7 irmware is generated and released as signed Code Partition
Directory (CPD) format file which is aligned with the SPI flash code
partition definition. The driver parses the CPD based on the layout.
Syscom is an inter-process(or) communication mechanism between an IPU and
host. Syscom uses message queues for message exchange between IPU and
host. Each message queue has its consumer and producer, host queue
messages to firmware as the producer and then firmware to dequeue the
messages as consumer and vice versa. IPU and host use shared registers or
memory to reside the read and write indices which are updated by consumer
and producer.
IPU7 firmware defined its boot sequence, driver setup the boot
configuration and program the boot parameters to start and run
the firmware.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
