summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2025-05-12drm/msm/dp: Fix support of LTTPR initializationAleksandrs Vinarskis1-4/+9
Initialize LTTPR before msm_dp_panel_read_sink_caps, as DPTX shall (re)read DPRX caps after LTTPR detection, as required by DP 2.1a, Section 3.6.7.6.1. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652301/ Link: https://lore.kernel.org/r/20250507230113.14270-2-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from SAR2130P CTL blocksDmitry Baryshkov1-3/+2
Follow the changes in the commit a2649952f66e ("drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from CTL blocks on DPU >= 5.0") and remove DPU_CTL_SPLIT_DISPLAY from the CTL blocks on the SAR2130P platform. Single CTL is used for all interfaces used by a single path Fixes: 178575173472 ("drm/msm/dpu: add catalog entry for SAR2130P") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/651883/ Link: https://lore.kernel.org/r/20250506-dpu-sar2130p-no-split-display-v1-1-b619c0fddea5@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add handling of LM_6 and LM_7 bits in pending flush maskKrzysztof Kozlowski1-0/+6
MDSS/MDP v12 comes with new bits in flush registers (e.g. MDP_CTL_0_FLUSH) for Layer Mixer 6 and 7. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651260/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-13-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add LM_7, DSC_[67], PP_[67] and MERGE_3D_5Krzysztof Kozlowski1-0/+6
Add IDs for new blocks present in MDSS/MDP v12 for LM, DSC, PINGPONG and MERGE_3D blocks. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651262/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-12-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Drop useless commentsKrzysztof Kozlowski1-8/+0
Drop comments about SoC before each 'struct dpu_lm_sub_blks' for given SoC because it's duplicating the actual name of structure. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651251/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-11-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE before blend setupKrzysztof Kozlowski1-0/+2
Before blend setup, all existing blend stages are cleared, so shall be active fetch pipes. Fixes: b3652e87c03c ("drm/msm/disp/dpu1: add support to program fetch active in ctl path") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651263/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-10-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on ctl_path resetKrzysztof Kozlowski1-0/+3
Resetting entire CTL path should also include resetting active fetch pipes. Fixes: e1a950eec256 ("drm/msm/dpu: add reset_intf_cfg operation for dpu_hw_ctl") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651252/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-9-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on mixer resetKrzysztof Kozlowski1-0/+3
Resetting mixers should also include resetting active fetch pipes. Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651246/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-8-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add missing "fetch" name to set_active_pipes()Krzysztof Kozlowski3-10/+10
The set_active_pipes() callback configures CTL_FETCH_PIPE_ACTIVE and newer DPU v12.0 comes with CTL_PIPE_ACTIVE, thus rename it to set_active_fetch_pipes() to better match the purpose. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651261/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-7-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: wire in hpd_enable/hpd_disable bridge opsDmitry Baryshkov4-17/+10
The HDMI driver already has msm_hdmi_hpd_enable() and msm_hdmi_hpd_disable() functions. Wire them into the msm_hdmi_bridge_funcs, so that HPD can be enabled and disabled dynamically rather than always having HPD events generation enabled. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-13-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: ensure that HDMI is up if HPD is requestedDmitry Baryshkov4-2/+18
The HDMI block needs to be enabled to properly generate HPD events. Make sure it is not turned off in the disable paths if HPD delivery is enabled. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651722/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-12-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: expand the HDMI_CFG macroDmitry Baryshkov2-9/+9
Expand the HDMI_CFG() macro in HDMI config description. It has no added value other than hiding some boilerplate declarations. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651724/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-11-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: rename hpd_clks to pwr_clksDmitry Baryshkov2-16/+16
As these clocks are now used in the runtime PM callbacks, they have no connection to 'HPD'. Rename corresponding fields to follow clocks purpose, to power up the HDMI controller. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651720/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-10-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: implement proper runtime PM handlingDmitry Baryshkov4-74/+47
It is completely not obvious, but the so-called 'hpd' clocks and regulators are required for the HDMI host to function properly. Merge pwr and hpd regulators. Use regulators, clocks and pinctrl to implement proper runtime PM callbacks. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651715/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-9-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: add runtime PM calls to DDC transfer functionDmitry Baryshkov1-2/+12
We must be sure that the HDMI controller is powered on, while performing the DDC transfer. Add corresponding runtime PM calls to msm_hdmi_i2c_xfer(). Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651727/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-8-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: switch to pm_runtime_resume_and_get()Dmitry Baryshkov3-4/+16
The pm_runtime_get_sync() function is a bad choise for runtime power management. Switch HDMI driver to pm_runtime_resume_and_get() and add proper error handling, while we are at it. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651713/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-7-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: switch to clk_bulk APIDmitry Baryshkov3-37/+19
The last platform using legacy clock names for HDMI block (APQ8064) switched to new clock names in 5.16. It's time to stop caring about old DT, drop hand-coded helpers and switch to clk_bulk_* API. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651716/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-6-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: drop clock frequency assignmentDmitry Baryshkov3-12/+0
The only clock which has frequency being set through hpd_freqs is the "core" aka MDSS_HDMI_CLK clock. It always has the specified frequency, so we can drop corresponding clk_set_rate() call together with the hpd_freq infrastructure. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651717/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-5-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: simplify extp clock handlingDmitry Baryshkov3-45/+18
With the extp being the only "power" clock left, remove the surrounding loops and handle the extp clock directly. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651710/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-4-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: move the alt_iface clock to the hpd listDmitry Baryshkov1-3/+3
According to the vendor kernel [1] , the alt_iface clock should be enabled together with the rest of HPD clocks, to make HPD to work properly. [1] https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/commit/e07a5487e521e57f76083c0a6e2f995414ac6d03 Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651709/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-3-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: convert clock and regulator arrays to const arraysDmitry Baryshkov2-9/+9
As a preparation to the next patches convert 'static const char *' arrays to 'static const char * const', as required by the checkpatch.pl Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/651705/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-2-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) supportRyan Walklin1-0/+25
The DE33 is a newer version of the Allwinner Display Engine IP block, found in the H616, H618, H700 and T507 SoCs. DE2 and DE3 are already supported by the mainline driver. The DE33 in the H616 has mixer0 and writeback units. The clocks and resets required are identical to the H3 and H5 respectively, so use those existing structs for the H616 description. There are two additional 32-bit registers (at offsets 0x24 and 0x28) which require clearing and setting respectively to bring up the hardware. The function of these registers is currently unknown, and the values are taken from the out-of-tree driver. Add the required clock description struct and compatible string to the DE2 driver. Signed-off-by: Ryan Walklin <ryan@testtoast.com> Link: https://patch.msgid.link/20250511104042.24249-9-ryan@testtoast.com Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2025-05-12remoteproc: xlnx: Avoid RPU force power downTanmay Shah1-1/+33
Powering off RPU using force_pwrdwn call results in system failure if there are multiple users of that RPU node. Better mechanism is to use request_node and release_node EEMI calls. With use of these EEMI calls, platform management controller will take-care of powering off RPU when there is no user. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Link: https://lore.kernel.org/r/20250506165944.1109534-1-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2025-05-12mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init()Keguang Zhang1-8/+6
As reported by Dan, commit d2d10ede04b1 ("mtd: rawnand: Add Loongson-1 NAND Controller Driver"), leads to the following Smatch static checker warning: drivers/mtd/nand/raw/loongson1-nand-controller.c:730 ls1x_nand_chip_init() warn: inconsistent refcounting 'chip_np->kobj.kref.refcount.refs.counter': Fix this issue by calling of_node_put() immediately after using chip_np. In addition, remove all unnecessary of_node_put(chip_np) calls. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/aBR535RZZT-sa6QZ@stanley.mountain/ Fixes: d2d10ede04b1 ("mtd: rawnand: Add Loongson-1 NAND Controller Driver") Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-05-12mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer()Dan Carpenter1-1/+1
The "desc" variable is NULL and PTR_ERR(NULL) is zero/success. Return a negative error code instead. Fixes: d2d10ede04b1 ("mtd: rawnand: Add Loongson-1 NAND Controller Driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-05-12wifi: iwlwifi: cfg: clean up dr/br configsJohannes Berg3-28/+1
We don't need the configs that won't end up being used, such as the "br" config for discrete devices, remove them. Also remove the module firmware for test chips, that's never needed. For now keep the iwl_dr_mac_cfg even if it's unused, we'll add platforms with it once we have their PCI IDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.15e2056ec40f.I75a6ce4ad0b14d2b4413615f05523a8f62f08954@changeid
2025-05-12wifi: iwlwifi: Add helper function to extract device IDPagadala Yesu Anjaneyulu1-0/+7
Add iwl_trans_get_device_id() to extract the device ID from the hw_id member in the iwl_trans structure. hw_id member contains both sub-device ID and device ID, with the device ID occupying bits 16 to 31. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.4411402701f2.I81cde20de05e3bb993977f8d4bbf90707819347f@changeid
2025-05-12wifi: iwlwifi: cfg: mark Ty devices as discreteJohannes Berg3-2/+13
Looks like these were never marked discrete, since they always used the iwl_so_mac_cfg (earlier iwl_so_trans_cfg). Mark them as discrete since they are. Signed-off-by: Johannes Berg <johannes.berg@intel.com> PerCI-Ready: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.f3a75ae80f28.I79964f4426389f04798b70841a9e847be48bf9c3@changeid
2025-05-12wifi: iwlwifi: cfg: remove MAC type/step matchingJohannes Berg3-23/+4
Now that it's all split into MAC and RF configs, remove the matching on MAC type and step. If we ever need to do something based on the MAC step, we'll have to find some new mechanism (since the MAC type is known already from the PCI IDs table, but not the step), or just handle the (likely small) differences in code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.fca99a5ab315.Iae27b781221fd29845493adf2c29d9e4f7a9c33b@changeid
2025-05-12wifi: iwlwifi: cfg: add a couple of older devicesJohannes Berg3-0/+43
There are some devices that are misidentified, such as 7265-N and Killer 1435 variants. Add their names, and for some of them also add the PCI IDs to match at all. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.ca03a90c294e.I04d64964c664d49ab16760d754968f09c607f36a@changeid
2025-05-12wifi: iwlwifi: cfg: fix PE RF namesJohannes Berg5-14/+29
There are a couple of variants of this, match them correctly to their names and clean up a bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.d03eaad5be56.I276a09f0cad364e51ed4730ca81fbe504e61f2c7@changeid
2025-05-12wifi: iwlwifi: cfg: fix and clean up FM/WH device matchingJohannes Berg8-50/+56
We only need a few entries, and there don't seem to be any such devices actually limited to 160 MHz. Also add PCI IDs for the new Killer device on LNL platforms. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.ba2964bee671.If7aaaf10b236115e39b17d37296341de6c821069@changeid
2025-05-12wifi: iwlwifi: cfg: clean up GF device matchingJohannes Berg4-96/+22
Again some names don't actually exist, and we only need a few entries to cover Ty (discrete) and AX211/AX411. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.8888f6798581.If332ebfc3b3f4a335a79ccee13e90f93b1ee4df7@changeid
2025-05-12wifi: iwlwifi: cfg: clean up JF device matchingJohannes Berg3-166/+35
This really only needs to be distinguished based on the RF type, bandwidth limit and possibly diversity (JF1). Some of the names that are defined don't even exist. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.bca83604aa92.I35301d2d8b57c072284fff7bf6682b4a9424e56c@changeid
2025-05-12wifi: iwlwifi: tests: make subdev match test more preciseJohannes Berg1-0/+8
It's OK to match with subdevice_mask as long as that doesn't overlap the RF ID/BW limit/cores fields in that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.87cc0ad360a8.I9be361caedd7258e8e817d4100c549681396f307@changeid
2025-05-12wifi: iwlwifi: cfg: clean up HR device matchingJohannes Berg4-157/+8
We only need a few entries on top of the Killer ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.fa0cde465de0.I6a3f9ed9a7341e2c58c69af50a9f126992a745f2@changeid
2025-05-12wifi: iwlwifi: cfg: unify and add some Killer devicesJohannes Berg3-92/+43
Unify a number of Killer devices now that we no longer need to distinguish the MAC type, and add a few more that wouldn't have gotten the right name before. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.a16b1c2740f8.I147b97ef2c8e99451806ea0e34a9eb5bff37c326@changeid
2025-05-12wifi: iwlwifi: cfg: fix and unify Killer/JF configsJohannes Berg2-57/+7
All of these should be 160 MHz, and they can be recognised by just the subdevice ID. Unify all the Killer/JF entries. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.a93788f159ec.I114f09a0f61849ac3b75d12d7def35be842e5b7c@changeid
2025-05-12wifi: iwlwifi: cfg: fix Ma device configsJohannes Berg1-3/+3
These should be according to their RF type, not just use GF unconditionally. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.4dd365eb76cd.I91f368df691a3ce6c545d9cdc44676e7883efa16@changeid
2025-05-12wifi: iwlwifi: cfg: fix some device namesJohannes Berg2-10/+10
Officially, the device names have dashes ("Wireless-N"), so add them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.4f7bbd57680f.Ida19b5e696723db5839c13341d6ca7085e8c2568@changeid
2025-05-12wifi: iwlwifi: cfg: remove some unused namesJohannes Berg2-6/+0
There are a couple of old names that don't actually get used. Remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.1ed5fc197ba0.I52d7bb49db24523ad93ad83a89c8e846d9a43241@changeid
2025-05-12wifi: iwlwifi: mld: add debug log instead of warningSomashekhar Puttagangaiah1-1/+4
During link selection if the links does not meet the valid grade criteria then add debug log instead of warning. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.2593268ca988.I9786126cd1078caec8587b166a7f8735300c951d@changeid
2025-05-12wifi: iwlwifi: dbg: fix dump trigger split checkJohannes Berg1-1/+1
Evidently, I confused the fields here, apply_policy should be checked for IWL_FW_INI_APPLY_POLICY_SPLIT_DUMP_RESET. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Eilon Rinat <eilon.rinat@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.c802d5cc1312.I0cf5d74f91349499ab35eef0ebdc604961e492ef@changeid
2025-05-12ACPI: tables: Improve logging around acpi_initialize_tables()Bartosz Szczepanek1-1/+5
Emit a warning that includes return code in a readable format. Example: ACPI: Failed to initialize tables, status=0x5 (AE_NOT_FOUND) No other functional changes intended. Signed-off-by: Bartosz Szczepanek <bsz@amazon.de> Link: https://patch.msgid.link/20250423085637.38658-1-bsz@amazon.de [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-12ACPI: VIOT: Remove (explicitly) unused headerAndy Shevchenko1-1/+1
The fwnode.h is not supposed to be used by the drivers as it has the definitions for the core parts for different device property provider implementations. Drop it. Note, that fwnode API for drivers is provided in property.h which is included here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://patch.msgid.link/20250331072311.3987967-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-12ACPI: MRRM: Add /sys files to describe memory rangesTony Luck1-1/+141
Perf and resctrl users need an enumeration of which memory addresses are bound to which "region" tag. Parse the ACPI MRRM table and add /sys entries for each memory range describing base address, length, NUMA node, and which region tags apply for same-socket and cross-socket access. Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://patch.msgid.link/20250505173819.419271-3-tony.luck@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-12ACPI: MRRM: Minimal parse of ACPI MRRM tableTony Luck3-0/+46
The resctrl file system code needs to know how many region tags are supported. Parse the ACPI MRRM table and save the max_mem_region value. Provide a function for resctrl to collect that value. Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://patch.msgid.link/20250505173819.419271-2-tony.luck@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-12Merge ACPICA material for 6.16 to satisfy dependenciesRafael J. Wysocki152-247/+263
* acpica: (30 commits) ACPICA: Update copyright year ACPICA: Logfile: Changes for version 20250404 ACPICA: Replace strncpy() with memcpy() ACPICA: Apply ACPI_NONSTRING in more places ACPICA: Avoid sequence overread in call to strncmp() ACPICA: Adjust the position of code lines ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table ACPICA: Apply ACPI_NONSTRING ACPICA: Introduce ACPI_NONSTRING ACPICA: actbl2.h: ERDT: Add typedef and other definitions ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name ACPICA: Utilities: Fix spelling mistake "Incremement" -> "Increment" ACPICA: MRRM: Some cleanups ACPICA: actbl2: Add definitions for RIMT ACPICA: actbl2.h: MRRM: Add typedef and other definitions ACPICA: infrastructure: Add new header and ACPI_DMT_BUF26 types ACPICA: Interpret SIDP structures in DMAR ACPICA: utilities: Fix overflow check in vsnprintf() ACPICA: Apply pack(1) to union aml_resource ACPICA: Drop stale comment about the header file content ...
2025-05-12ACPICA: Update copyright yearSaket Dumbre143-144/+144
ACPICA commit 45253be18b3f37d46cd0072aa3f8a0a21a70e0a4 Changes needed by acpisrc to update copyright year when building for release. Link: https://github.com/acpica/acpica/commit/45253be1 Signed-off-by: Saket Dumbre <saket.dumbre@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-12ACPICA: Replace strncpy() with memcpy()Ahmed Salem3-5/+5
ACPICA commit 83019b471e1902151e67c588014ba2d09fa099a3 strncpy() is deprecated for NUL-terminated destination buffers[1]. Use memcpy() for length-bounded destinations. Link: https://github.com/KSPP/linux/issues/90 [1] Link: https://github.com/acpica/acpica/commit/83019b47 Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/1910878.atdPhlSkOF@rjwysocki.net
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-19 15:52:27 +0300