| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Upcoming PTM debugfs interface relies on the DWC PCIe mode to expose the
relevant debugfs attributes to userspace. So pass the mode to
dwc_pcie_debugfs_init() API from host and ep drivers and save it in
'struct dw_pcie::mode'.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20250505-pcie-ptm-v4-2-02d26d51400b@linaro.org
|
|
Precision Time Management (PTM) mechanism defined in PCIe spec r6.0,
sec 6.21 allows precise coordination of timing information across multiple
components in a PCIe hierarchy with independent local time clocks.
PCI core already supports enabling PTM in the root port and endpoint
devices through PTM Extended Capability registers. But the PTM context
supported by the PTM capable components such as Root Complex (RC) and
Endpoint (EP) controllers were not exposed as of now. Part of the reason is
that the spec doesn't define how the context information is exposed to the
software and left it to the vendor implementation. So there is no
standardized way to get access to the context information and each vendor
have defined their own way.
This commit adds debugfs support to expose the PTM context to userspace
from both PCIe RC and EP controllers. Since the context information is
exposed in a vendor specific way, the debugfs interface allows the
controller drivers to implement callbacks for each attribute, to be called
by the generic PTM driver.
The Controller drivers are expected to call pcie_ptm_create_debugfs() to
create the debugfs attributes for the PTM context and call
pcie_ptm_destroy_debugfs() to destroy them. The drivers should also
populate the relevant callbacks in the 'struct pcie_ptm_ops' structure
based on the controller implementation.
Below PTM context are exposed through debugfs:
PCIe RC
=======
1. PTM Local clock
2. PTM T2 timestamp
3. PTM T3 timestamp
4. PTM Context valid
PCIe EP
=======
1. PTM Local clock
2. PTM T1 timestamp
3. PTM T4 timestamp
4. PTM Master clock
5. PTM Context update
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: fix overflow issue reported by Dan Carpenter from
https://lore.kernel.org/linux-pci/b41c1754-c6b7-4805-9f14-7c643d6c5304@suswa.mountain]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20250505-pcie-ptm-v4-1-02d26d51400b@linaro.org
|
|
PCIe BW controller counted LBMS assertions for the purposes of the Target
Speed quirk (pcie_failed_link_retrain()). It was also a plan to expose the
LBMS count through sysfs to allow better diagnosing link related issues.
Lukas Wunner suggested, however, that adding a trace event would be better
for diagnostics purposes, leaving only pcie_failed_link_retrain() as a user
of the lbms_count.
The logic in pcie_failed_link_retrain() does not require keeping count of
LBMS assertions, so replace lbms_count with a simple flag in pci_dev's
priv_flags. The reduced complexity allows removing pcie_bwctrl_lbms_rwsem.
Since pcie_failed_link_retrain() runs before bwctrl is probed during boot,
the LBMS in Link Status register still has to be checked by the quirk.
The priv_flags numbering is not continuous because hotplug code added a few
flags to fill numbers 4-5 (hotplug and bwctrl changes are routed through in
different branches).
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: squashed a fix to resolve build failures from
https://lore.kernel.org/all/20250508090036.1528-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20250422115548.1483-1-ilpo.jarvinen@linux.intel.com
|
|
Add support for internal DMA in Tegra234 devices. Tegra234 has an
internal DMA controller, while Tegra241 continues to use an external
DMA controller (GPCDMA). This patch adds support for both internal
and external DMA controllers.
Signed-off-by: Vishwaroop A <va@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20250513200043.608292-2-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the current code, if an ROC is started on a vif that already has an
active ROC we reject it and warn.
But really there is no such limitation. The actual limitation is to not
have 2 ROCs of the same type simultaneously.
Add a helper function to find a vif that has an active ROC of a given
type, and only if one exist - reject the ROC.
This allows also to remove bss_roc_vif.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.1f8c55198578.I17cb191596ed4e97a4854108f8ca5ca197662a62@changeid
|
|
Various headers are required for these to build properly.
Include the needed files.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.956281013349.I4c537dffb82f5e5042e4a880cde3c6da38a56cbc@changeid
|
|
Context info was introduced in 22000, and was significantly changed in
ax210. The new version of context info was called 'gen3',
probably because in 22000, the gen2 transport was added.
But this name is just wrong:
- if 'gen' enumerates transports, there was not a gen3 transport, just a
few modifications to gen1/2 transports needed for ax210.
- if 'gen' enumerates devices, then we can just use the device names.
Also, context info will soon become a lib, agnostic of the transport
generations.
Simply replace 'gen3' with 'v2'.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.a580bd8d4f74.Ie413a02233f1a5ad538e13071c09760b9d97be3b@changeid
|
|
iwl_pcie_apply_destination is used in all generation.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.7eaf79a07226.I615cfd21001208b366c94a5fcb8e30a7d97f0ac2@changeid
|
|
Map iwl_context_info to the matching struct in the FW.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.a7240935006e.I75e2e13421b5dac2c1bdbd01fdfd34c38f2d3d8c@changeid
|
|
TFD_QUEUE_SIZE_MAX_GEN3 is not used, remove it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.a0154cca6afb.Ifb4915e0acd51be6a75d33a8b96b3f7b0928b312@changeid
|
|
As those are now the same, unify and adjust the documentation.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.b7ddfade8fec.I2bf97252c4bd751077ade204767eed02d815614d@changeid
|
|
iwlagn_scd_bc_tbl is used for pre-ax210 devices,
and iwl_gen3_bc_tbl_entry is used for ax210 and on. But there is no
difference between the the 22000 version and the AX210+ one.
In order to unify the two, as first step make iwlagn_scd_bc_tbl an entry
as well, and adjust the code. In a later patch both structures will be
unified.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.645cd82ebf48.Iaa7e88179372d60ef31157e379737b5babe54012@changeid
|
|
'GEN3' here really means 'AX210'. Rename.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.b7fb5b854ded.Ib52b84c6e36e312b2eeb84a3cf71c6185fb52ee7@changeid
|
|
We have iwl_tx_cmd for devices older than 22000, iwl_tx_cmd_gen2 for
22000 devices, and iwl_tx_cmd_gen3 ax210 and up.
But the convention for all other APIs is to have the latest version
without any prefix and the older ones - with a _vX prefix,
where X is the highest version that this struct support.
The term 'gen' was introduced as the name of the (back then) new
transport, and should not be used as a device name (for that we have the
actual names: 22000, ax210, etc.)
Now as a new transport, called 'gen3', is going to be written and it can
be confused with this API.
Move iwl_tx_cmd to use the regular versioning convention.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.806e40c8f767.Ibc0e95e43a6fa6d47f72823bf804314d5db84618@changeid
|
|
This version is not used on any device. Don't support it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add support and enable decoding of H264 High 10 and 4:2:2 profiles.
Decoded CAPTURE buffer width is aligned to 64 pixels to accommodate HW
requirement of 10-bit format buffers, fixes decoding of all the 4:2:2
and 10bit 4:2:2 flusters tests except two stream that present some
visual artifacts.
- Hi422FREXT17_SONY_A
- Hi422FREXT19_SONY_A
The get_image_fmt() ops is implemented to select an image format
required for the provided SPS control, and returns RKVDEC_IMG_FMT_ANY
for other controls.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add support for a get_image_fmt() ops that returns the required image
format.
The CAPTURE format is reset when the required image format changes and
the buffer queue is not busy.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Setting up the control handler calls into .s_ctrl ops. While validating
the controls the ops may need to access some of the context state, which
could lead to a crash if not properly initialized.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Neither the hardware nor the kernel API support FMO/ASO features
required by the full baseline profile. Therefore limit the minimum
profile to the constrained baseline profile explicitly.
Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The HW iommu is able to support a 34-bit iova address-space (16GB),
enable this feature for the encoder/decoder driver by shifting the
address by two bits and setting the extended address registers.
Signed-off-by: Jianhua Lin <jianhua.lin@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
During initialization, the post processor allocates the same number of
buffers as the buf queue.
As the init function is called in streamon(), if an allocation fails,
streamon will return an error and streamoff() will not be called, keeping
all post processor buffers allocated.
To avoid that, all post proc buffers are freed in case of an allocation
error.
Fixes: 26711491a807 ("media: verisilicon: Refactor postprocessor to store more buffers")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
mdp_get_plat_device() was added in 2022 but has remained unused.
Remove it.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
|
|
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining
callers. Remove it.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_page_array() now always creates a single page buffer array entry
for the rndis message, even if the rndis message crosses a page
boundary. As such, the number of page buffer array entries used for
the rndis message must no longer be tracked -- it is always just 1.
Remove the rmsg_pgcnt field and use "1" where the value is needed.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-5-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with commit dca5161f9bd0 ("hv_netvsc: Check status in
SEND_RNDIS_PKT completion message") in the 6.3 kernel, the Linux
driver for Hyper-V synthetic networking (netvsc) occasionally reports
"nvsp_rndis_pkt_complete error status: 2".[1] This error indicates
that Hyper-V has rejected a network packet transmit request from the
guest, and the outgoing network packet is dropped. Higher level
network protocols presumably recover and resend the packet so there is
no functional error, but performance is slightly impacted. Commit
dca5161f9bd0 is not the cause of the error -- it only added reporting
of an error that was already happening without any notice. The error
has presumably been present since the netvsc driver was originally
introduced into Linux.
The root cause of the problem is that the netvsc driver in Linux may
send an incorrectly formatted VMBus message to Hyper-V when
transmitting the network packet. The incorrect formatting occurs when
the rndis header of the VMBus message crosses a page boundary due to
how the Linux skb head memory is aligned. In such a case, two PFNs are
required to describe the location of the rndis header, even though
they are contiguous in guest physical address (GPA) space. Hyper-V
requires that two rndis header PFNs be in a single "GPA range" data
struture, but current netvsc code puts each PFN in its own GPA range,
which Hyper-V rejects as an error.
The incorrect formatting occurs only for larger packets that netvsc
must transmit via a VMBus "GPA Direct" message. There's no problem
when netvsc transmits a smaller packet by copying it into a pre-
allocated send buffer slot because the pre-allocated slots don't have
page crossing issues.
After commit 14ad6ed30a10 ("net: allow small head cache usage with
large MAX_SKB_FRAGS values") in the 6.14-rc4 kernel, the error occurs
much more frequently in VMs with 16 or more vCPUs. It may occur every
few seconds, or even more frequently, in an ssh session that outputs a
lot of text. Commit 14ad6ed30a10 subtly changes how skb head memory is
allocated, making it much more likely that the rndis header will cross
a page boundary when the vCPU count is 16 or more. The changes in
commit 14ad6ed30a10 are perfectly valid -- they just had the side
effect of making the netvsc bug more prominent.
Current code in init_page_array() creates a separate page buffer array
entry for each PFN required to identify the data to be transmitted.
Contiguous PFNs get separate entries in the page buffer array, and any
information about contiguity is lost.
Fix the core issue by having init_page_array() construct the page
buffer array to represent contiguous ranges rather than individual
pages. When these ranges are subsequently passed to
netvsc_build_mpb_array(), it can build GPA ranges that contain
multiple PFNs, as required to avoid the error "nvsp_rndis_pkt_complete
error status: 2". If instead the network packet is sent by copying
into a pre-allocated send buffer slot, the copy proceeds using the
contiguous ranges rather than individual pages, but the result of the
copying is the same. Also fix rndis_filter_send_request() to construct
a contiguous range, since it has its own page buffer array.
This change has a side benefit in CoCo VMs in that netvsc_dma_map()
calls dma_map_single() on each contiguous range instead of on each
page. This results in fewer calls to dma_map_single() but on larger
chunks of memory, which should reduce contention on the swiotlb.
Since the page buffer array now contains one entry for each contiguous
range instead of for each individual page, the number of entries in
the array can be reduced, saving 208 bytes of stack space in
netvsc_xmit() when MAX_SKG_FRAGS has the default value of 17.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217503
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217503
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-4-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netvsc currently uses vmbus_sendpacket_pagebuffer() to send VMBus
messages. This function creates a series of GPA ranges, each of which
contains a single PFN. However, if the rndis header in the VMBus
message crosses a page boundary, the netvsc protocol with the host
requires that both PFNs for the rndis header must be in a single "GPA
range" data structure, which isn't possible with
vmbus_sendpacket_pagebuffer(). As the first step in fixing this, add a
new function netvsc_build_mpb_array() to build a VMBus message with
multiple GPA ranges, each of which may contain multiple PFNs. Use
vmbus_sendpacket_mpb_desc() to send this VMBus message to the host.
There's no functional change since higher levels of netvsc don't
maintain or propagate knowledge of contiguous PFNs. Based on its
input, netvsc_build_mpb_array() still produces a separate GPA range
for each PFN and the behavior is the same as with
vmbus_sendpacket_pagebuffer(). But the groundwork is laid for a
subsequent patch to provide the necessary grouping.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-3-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vmbus_sendpacket_mpb_desc() is currently used only by the storvsc driver
and is hardcoded to create a single GPA range. To allow it to also be
used by the netvsc driver to create multiple GPA ranges, no longer
hardcode as having a single GPA range. Allow the calling driver to
specify the rangecount in the supplied descriptor.
Update the storvsc driver to reflect this new approach.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-2-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cpsw->slaves[slave_no].phy should be equal to netdev->phydev, because it
is assigned from phy_attach_direct(). The latter is indirectly called
from the two identically named cpsw_slave_open() functions, one in
cpsw.c and another in cpsw_new.c.
Thus, the driver should not need custom logic to find the PHY, the core
can find it, and phy_do_ioctl_running() achieves exactly that.
However, that is only the case for cpsw_new and for the cpsw driver in
dual EMAC mode. This is explained in more detail in the previous commit.
Thus, allow the simpler core logic to execute for cpsw_new, and move
cpsw_ndo_ioctl() to cpsw.c.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250512114422.4176010-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the two cpsw drivers to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
The cpsw_hwtstamp_get() and cpsw_hwtstamp_set() methods (and their shim
definitions, for the case where CONFIG_TI_CPTS is not enabled) must have
their prototypes adjusted.
These methods are used by two drivers (cpsw and cpsw_new), with vastly
different configurations:
- cpsw has two operating modes:
- "dual EMAC" - enabled through the "dual_emac" device tree property -
creates one net_device per EMAC / slave interface (but there is no
bridging offload)
- "switch mode" - default - there is a single net_device, with two
EMACs/slaves behind it (and switching between them happens
unbeknownst to the network stack).
- cpsw_new always registers one net_device for each EMAC which doesn't
have status = "disabled". In terms of switching, it has two modes:
- "dual EMAC": default, no switching between ports, no switchdev
offload.
- "switch mode": enabled through the "switch_mode" devlink parameter,
offloads the Linux bridge through switchdev
Essentially, in 3 out of 4 operating modes, there is a bijective
relation between the net_device and the slave. Timestamping can thus be
configured on individual slaves. But in the "switch mode" of the cpsw
driver, ndo_eth_ioctl() targets a single slave, designated using the
"active_slave" device tree property.
To deal with these different cases, the common portion of the drivers,
cpsw_priv.c, has the cpsw_slave_index() function pointer, set to
separate, identically named cpsw_slave_index_priv() by the 2 drivers.
This is all relevant because cpsw_ndo_ioctl() has the old-style
phy_has_hwtstamp() logic which lets the PHY handle the timestamping
ioctls. Normally, that logic should be obsoleted by the more complex
logic in the core, which permits dynamically selecting the timestamp
provider - see dev_set_hwtstamp_phylib().
But I have doubts as to how this works for the "switch mode" of the dual
EMAC driver, because the core logic only engages if the PHY is visible
through ndev->phydev (this is set by phy_attach_direct()).
In cpsw.c, we have:
cpsw_ndo_open()
-> for_each_slave(priv, cpsw_slave_open, priv); // continues on errors
-> of_phy_connect()
-> phy_connect_direct()
-> phy_attach_direct()
OR
-> phy_connect()
-> phy_connect_direct()
-> phy_attach_direct()
The problem for "switch mode" is that the behavior of phy_attach_direct()
called twice in a row for the same net_device (once for each slave) is
probably undefined.
For sure it will overwrite dev->phydev. I don't see any explicit error
checks for this case, and even if there were, the for_each_slave() call
makes them non-fatal to cpsw_ndo_open() anyway.
I have no idea what is the extent to which this provides a usable
result, but the point is: only the last attached PHY will be visible
in dev->phydev, and this may well be a different PHY than
cpsw->slaves[slave_no].phy for the "active_slave".
In dual EMAC mode, as well as in cpsw_new, this should not be a problem.
I don't know whether PHY timestamping is a use case for the cpsw "switch
mode" as well, and I hope that there isn't, because for the sake of
simplicity, I've decided to deliberately break that functionality, by
refusing all PHY timestamping. Keeping it would mean blocking the old
API from ever being removed. In the new dev_set_hwtstamp_phylib() API,
it is not possible to operate on a phylib PHY other than dev->phydev,
and I would very much prefer not adding that much complexity for bizarre
driver decisions.
Final point about the cpsw_hwtstamp_get() conversion: we don't need to
propagate the unnecessary "config.flags = 0;", because dev_get_hwtstamp()
provides a zero-initialized struct kernel_hwtstamp_config.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250512114422.4176010-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure the call of skb_tx_timestamp is as close as possbile to the
doorbell.
The patch also adjusts the order of setting SKBTX_IN_PROGRESS and
generate software timestamp so that without SOF_TIMESTAMPING_OPT_TX_SWHW
being set the software and hardware timestamps will not appear in the
error queue of socket nearly at the same time (Please see __skb_tstamp_tx()).
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20250510134812.48199-4-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure the call of skb_tx_timestamp is as close as possible to the
doorbell.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20250510134812.48199-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure the call of skb_tx_timestamp is as close as possible to the
doorbell.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20250510134812.48199-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each CGX block supports 4 logical MACs (LMACS). Receive
counters CGX_CMR_RX_STAT0-8 are per LMAC and CGX_CMR_RX_STAT9-12
are per CGX.
Due a bug in previous patch, stale Per CGX counters values observed.
Fixes: 66208910e57a ("octeontx2-af: Support to retrieve CGX LMAC stats")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250513071554.728922-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since MTK_ESW_BIT is a bit number rather than a bitmap, it causes
MTK_HAS_CAPS to produce incorrect results. This leads to the ETH
driver not declaring MAC capabilities correctly for the MT7988 ESW.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/b8b37f409d1280fad9c4d32521e6207f63cd3213.1747110258.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, missing the error return if there is an
unknown command. It causes the driver to mistakenly believe that the
interaction is complete. This problem occurs when new driver is paired
with old firmware, which does not support the new mailbox commands.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/64DBB705D35A0016+20250513021009.145708-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, the timeout waiting for the firmware to
return is too short. So that some mailbox commands cannot be completed.
Use the 'timeout' parameter instead of fixed timeout value for flexible
configuration.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5D5BDE3EA501BDB8+20250513021009.145708-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the new firmware version, the shadow ram reserves some space to store
I2C information, so the checksum calculation needs to skip this section.
Otherwise, the driver will fail to probe because the invalid EEPROM
checksum.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1C6BF7A937237F5A+20250513021009.145708-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The calculation done by bmac_crc(addr) followed by taking the low 6 bits
and reversing them is equivalent to taking the high 6 bits from
crc32(~0, addr, ETH_ALEN). Just do that instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20250513050142.635391-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MDIO_DEVRES is only set where PHYLIB/PHYLINK are set which
select MDIO_DEVRES. So we can remove this symbol.
Note: Due to circular module dependencies we can't simply
make mdio_devres.c part of phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/27cba535-f507-4b32-84a3-0744c783a465@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The calculation done by calc_crc() is equivalent to
~crc32(~0, buf, len), so just use that instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20250513041402.541527-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add support for STM32MP25 SoC. There are new counter modes that may be
implemented in later. Still, use newly introduced compatible to handle
this new HW variant and avoid being blocked with existing compatible
in SoC dtsi file. Modes supported currently still remains compatible.
New timer 20 has encoder capability, add it to the list.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-4-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Adds support for a revision of the Turtle Beach Recon Wired Controller,
the Turtle Beach Stealth Ultra, and the PowerA Wired Controller.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250513225950.2719387-1-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Remove the custom device comparison function compare_dev and replace it
with the existing kernel helper component_compare_of
Signed-off-by: Tang Dongxing <tang.dongxing@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403155419406T5YhIJKId1FWor70EWWHG@zte.com.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
When calling component_bind_all(), if a component that is included
in the list fails, all of those that have been successfully bound
will be unbound, but this driver has two components lists for two
actual devices, as in, each mmsys instance has its own components
list.
In case mmsys0 (or actually vdosys0) is able to bind all of its
components, but the secondary one fails, all of the components of
the first are kept bound, while the ones of mmsys1/vdosys1 are
correctly cleaned up.
This is not right because, in case of a failure, the components
are re-bound for all of the mmsys/vdosys instances without caring
about the ones that were previously left in a bound state.
Fix that by calling component_unbind_all() on all of the previous
component masters that succeeded binding all subdevices when any
of the other masters errors out.
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In function mtk_drm_get_all_drm_priv(), this driver is incrementing
the refcount for the sub-drivers of mediatek-drm with a call to
device_find_child() when taking a reference to all of those child
devices.
When the component bind fails multiple times this results in a
refcount_t overflow, as the reference count is never decremented:
fix that by adding a call to put_device() for all of the mmsys
devices in a loop, in error cases of mtk_drm_bind() and in the
mtk_drm_unbind() callback.
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
