summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-06-11Merge branch 'wimax-2.6.35.y' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2010-06-11wimax/i2400m: fix missing endian correction read in fw loaderInaky Perez-Gonzalez1-1/+1
i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: Данилин Михаил <mdanilin@nsg.net.ru> Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2010-06-11net8139: fix a race at the end of NAPIFigo.zhang2-2/+2
fix a race at the end of NAPI complete processing, it had better do __napi_complete() first before re-enable interrupt. Signed-off-by:Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10r8169: fix mdio_read and update mdio_write according to hw specsTimo Teräs1-3/+9
Realtek confirmed that a 20us delay is needed after mdio_read and mdio_write operations. Reduce the delay in mdio_write, and add it to mdio_read too. Also add a comment that the 20us is from hw specs. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10gianfar: Revive the driver for eTSEC devices (disable timestamping)Anton Vorontsov1-2/+1
Since commit cc772ab7cdcaa24d1fae332d92a1602788644f7a ("gianfar: Add hardware RX timestamping support"), the driver no longer works on at least MPC8313ERDB and MPC8568EMDS boards (and possibly much more boards as well). That's how MPC8313 Reference Manual describes RCTRL_TS_ENABLE bit: Timestamp incoming packets as padding bytes. PAL field is set to 8 if the PAL field is programmed to less than 8. Must be set to zero if TMR_CTRL[TE]=0. I see that the commit above sets this bit, but it doesn't handle TMR_CTRL. Manfred probably had this bit set by the firmware for his boards. But obviously this isn't true for all boards in the wild. Also, I recall that Freescale BSPs were explicitly disabling the timestamping because of a performance drop. For now, the best way to deal with this is just disable the timestamping, and later we can discuss proper device tree bindings and implement enabling this feature via some property. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10phylib: Add support for the LXT973 phy.Richard Cochran1-1/+50
This patch implements a work around for Erratum 5, "3.3 V Fiber Speed Selection." If the hardware wiring does not respect this erratum, then fiber optic mode will not work properly. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09Merge branch 'master' of ↵David S. Miller12-204/+274
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-06-08iwlwifi: add missing rcu_read_lockJohannes Berg1-0/+2
Using ieee80211_find_sta() needs to be under RCU read lock, which iwlwifi currently misses, so fix it. Cc: stable@kernel.org Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-07ath5k: fix NULL pointer in antenna configurationBruno Randolf1-0/+7
If the channel is not set yet and we configure the antennas just store the setting. It will be activated during the next reset, when the channel is set. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-07p54usb: Add device ID for Dell WLA3310 USBJason Dravet1-0/+1
Add Dell WLA3310 USB wireless card, which has a Z-Com XG-705A chipset, to the USB Ids in p54usb. Signed-off-by: Jason Dravet <dravet@hotmail.com> Tested-by: Richard Gregory Tillmore <rtillmore@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Cc: <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-07wl1251: fix a memory leak in probeGrazvydas Ignotas1-0/+1
wl1251_sdio_probe() error path is missing wl1251_free_hw, add it. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-078139too: fix buffer overrun in rtl8139_init_boardDenis Kirjanov1-0/+1
Fix rtl_chip_info buffer overrun when we can't identify the chip. (i = ARRAY_SIZE (rtl_chip_info) in this case) Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-07asix: check packet size against mtu+ETH_HLEN instead of ETH_FRAME_LENJussi Kivilinna1-1/+1
Driver checks received packet is too large in asix_rx_fixup() and fails if it is. Problem is that MTU might be set larger than 1500 and asix fails to work correctly with VLAN tagged packets. The check should be 'dev->net->mtu + ETH_HLEN' instead. Tested with AX88772. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-07r8169: fix random mdio_write failuresTimo Teräs1-0/+5
Some configurations need delay between the "write completed" indication and new write to work reliably. Realtek driver seems to use longer delay when polling the "write complete" bit, so it waits long enough between writes with high probability (but could probably break too). This patch adds a new udelay to make sure we wait unconditionally some time after the write complete indication. This caused a regression with XID 18000000 boards when the board specific phy configuration writing many mdio registers was added in commit 2e955856ff (r8169: phy init for the 8169scd). Some of the configration mdio writes would almost always fail, and depending on failure might leave the PHY in non-working state. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-06iwlwifi: move sysfs_create_group to post request firmwareEmmanuel Grumbach1-159/+159
Move the sysfs_create_group to iwl_ucode_callback after we have safely got the firmware. The motivation to do this comes from a warning from lockdep which detected that we request priv->mutex while holding s_active during a sysfs request (show_statistics in the example copy pasted). The reverse order exists upon request_firmware: request_firmware which is a sysfs operation that requires s_active is run under priv->mutex. This ensures that we don't get sysfs request before we finish to request the firmware, avoiding this deadlock. ======================================================= [ INFO: possible circular locking dependency detected ] ------------------------------------------------------- cat/2595 is trying to acquire lock: (&priv->mutex){+.+.+.}, at: [<facfa598>] show_statistics+0x48/0x100 [iwlagn] but task is already holding lock: (s_active){++++.+}, at: [<c0580ebd>] sysfs_get_active_two+0x1d/0x50 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (s_active){++++.+}: [<c0489b74>] __lock_acquire+0xc44/0x1230 [<c048a1ed>] lock_acquire+0x8d/0x110 [<c0581499>] sysfs_addrm_finish+0xe9/0x180 [<c057f64a>] sysfs_hash_and_remove+0x4a/0x80 [<c05829d4>] sysfs_remove_group+0x44/0xd0 [<c0714b75>] dpm_sysfs_remove+0x15/0x20 [<c070dac8>] device_del+0x38/0x170 [<c070dc1e>] device_unregister+0x1e/0x60 [<c071838d>] _request_firmware+0x29d/0x550 [<c07186c7>] request_firmware+0x17/0x20 [<fad01bf1>] iwl_mac_start+0xb1/0x1230 [iwlagn] [<fa46ba06>] ieee80211_open+0x436/0x6f0 [mac80211] [<c0808cd2>] dev_open+0x92/0xf0 [<c0808b2b>] dev_change_flags+0x7b/0x190 [<c08148e8>] do_setlink+0x178/0x3b0 [<c0815169>] rtnl_setlink+0xf9/0x130 [<c081453b>] rtnetlink_rcv_msg+0x1bb/0x1f0 [<c0827ce6>] netlink_rcv_skb+0x86/0xa0 [<c081436c>] rtnetlink_rcv+0x1c/0x30 [<c08279c3>] netlink_unicast+0x263/0x290 [<c0828768>] netlink_sendmsg+0x1c8/0x2a0 [<c07f85fd>] sock_sendmsg+0xcd/0x100 [<c07f964d>] sys_sendmsg+0x15d/0x290 [<c07f9e6b>] sys_socketcall+0xeb/0x2a0 [<c040ad9f>] sysenter_do_call+0x12/0x38 -> #0 (&priv->mutex){+.+.+.}: [<c0489f84>] __lock_acquire+0x1054/0x1230 [<c048a1ed>] lock_acquire+0x8d/0x110 [<c08bb358>] __mutex_lock_common+0x58/0x470 [<c08bb84a>] mutex_lock_nested+0x3a/0x50 [<facfa598>] show_statistics+0x48/0x100 [iwlagn] [<c070d219>] dev_attr_show+0x29/0x50 [<c057fecd>] sysfs_read_file+0xdd/0x190 [<c052880f>] vfs_read+0x9f/0x190 [<c0528d22>] sys_read+0x42/0x70 [<c040ad9f>] sysenter_do_call+0x12/0x38 other info that might help us debug this: 3 locks held by cat/2595: #0: (&buffer->mutex){+.+.+.}, at: [<c057fe25>] sysfs_read_file+0x35/0x190 #1: (s_active){++++.+}, at: [<c0580ecd>] sysfs_get_active_two+0x2d/0x50 #2: (s_active){++++.+}, at: [<c0580ebd>] sysfs_get_active_two+0x1d/0x50 stack backtrace: Pid: 2595, comm: cat Not tainted 2.6.33-tp-rc4 #2 Call Trace: [<c08b99ab>] ? printk+0x1d/0x22 [<c0487752>] print_circular_bug+0xc2/0xd0 [<c0489f84>] __lock_acquire+0x1054/0x1230 [<c0478d81>] ? sched_clock_cpu+0x121/0x180 [<c048a1ed>] lock_acquire+0x8d/0x110 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<c08bb358>] __mutex_lock_common+0x58/0x470 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<c08bb84a>] mutex_lock_nested+0x3a/0x50 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<facfa598>] show_statistics+0x48/0x100 [iwlagn] [<c0580cf9>] ? sysfs_get_active+0x69/0xb0 [<facfa550>] ? show_statistics+0x0/0x100 [iwlagn] [<c070d219>] dev_attr_show+0x29/0x50 [<c057fecd>] sysfs_read_file+0xdd/0x190 [<c05ff314>] ? security_file_permission+0x14/0x20 [<c0528242>] ? rw_verify_area+0x62/0xd0 [<c052880f>] vfs_read+0x9f/0x190 [<c047745b>] ? up_read+0x1b/0x30 [<c057fdf0>] ? sysfs_read_file+0x0/0x190 [<c04af3b4>] ? audit_syscall_entry+0x1f4/0x220 [<c0528d22>] sys_read+0x42/0x70 [<c040ad9f>] sysenter_do_call+0x12/0x38 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-06iwl3945: fix internal scanAbhijeet Kolekar4-31/+96
Port of internal scan to iwl3945 missed introduction of iwl3945_get_single_channel_for_scan. Fix the following bug by introducing the iwl3945_get_single_channel_for_scan http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2208 Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-06iwl3945: enable stuck queue detection on 3945Reinette Chatre1-0/+1
We learn from http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1834 and https://bugzilla.redhat.com/show_bug.cgi?id=589777 that 3945 can also suffer from a stuck command queue. Enable stuck queue detection for iwl3945 to enable recovery in this case. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-05X25: remove duplicated #includeHuang Weiyi1-2/+0
Remove duplicated #include('s) in drivers/net/wan/x25_asy.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-05ppp_generic: fix multilink fragment sizesBen McKeegan1-1/+1
Fix bug in multilink fragment size calculation introduced by commit 9c705260feea6ae329bc6b6d5f6d2ef0227eda0a "ppp: ppp_mp_explode() redesign" Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-05ixgbe: only check pfc bits in hang logic if pfc is enabledJohn Fastabend1-1/+1
Only check pfc bits in hang logic if PFC is enabled. Previously, if DCB was enabled but PFC was disabled the incorrect pause bits would be checked. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04ath5k: retain promiscuous settingBob Copeland1-1/+3
Commit 56d1de0a21db28e41741cfa0a66e18bc8d920554, "ath5k: clean up filter flags setting" introduced a regression in monitor mode such that the promisc filter flag would get lost. Although we set the promisc flag when it changed, we did not preserve it across subsequent calls to configure_filter. This patch restores the original functionality. Cc: stable@kernel.org Bisected-by: weedy2887@gmail.com Tested-by: weedy2887@gmail.com Tested-by: Rick Farina <sidhayn@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04ath5k: depend on CONFIG_PM_SLEEP for suspend/resume functionsTobias Doerffel1-4/+4
When building a kernel with CONFIG_PM=y but neither suspend nor hibernate support, the compiler complains about the static functions ath5k_pci_suspend() and ath5k_pci_resume() not being used: drivers/net/wireless/ath/ath5k/base.c:713:12: warning: ‘ath5k_pci_suspend’ defined but not used drivers/net/wireless/ath/ath5k/base.c:722:12: warning: ‘ath5k_pci_resume’ defined but not used Depending on CONFIG_PM_SLEEP rather than CONFIG_PM fixes the issue. Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04Revert "wireless: hostap, fix oops due to early probing interrupt"John W. Linville1-9/+0
This reverts commit 15920d8afc87861672e16fa95ae2764b065d6dd3. This patch was discovered to cause some hostap devices to fail to initialized. https://bugzilla.kernel.org/show_bug.cgi?id=16111 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03Merge branch 'master' of ↵David S. Miller1-14/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-06-03ixgbe: return IXGBE_ERR_RAR_INDEX when out of rangeJeff Kirsher2-0/+3
Based on original patch from Shirley Ma <xma@us.ibm.com> Return IXGBE_ERR_RAR_INDEX when RAR index is out of range, instead of returning IXGBE_SUCCESS. CC: Shirley Ma <xma@us.ibm.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03sfc: Store port number in net_device::dev_idBen Hutchings2-4/+2
This exposes the port number to userland through sysfs. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03epic100: Test __BIG_ENDIAN instead of (non-existent) CONFIG_BIG_ENDIANRoland Dreier1-3/+4
Probably no one has used this driver on big-endian systems, since it was setting up descriptor swapping if CONFIG_BIG_ENDIAN is set, which it never is, since that symbol is not mentioned anywhere else in the kernel source. Switch this test to a check for __BIG_ENDIAN so it has a chance at working. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03tehuti: return -EFAULT on copy_to_user errorsDan Carpenter1-2/+2
copy_to_user() returns the number of bytes remaining but we want to return a negative error code here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03isdn/kcapi: return -EFAULT on copy_from_user errorsDan Carpenter1-3/+3
copy_from_user() returns the number of bytes remaining but we should return -EFAULT here. The error code gets returned to the user. Both old_capi_manufacturer() and capi20_manufacturer() had other places that already returned -EFAULT so this won't break anything. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03e1000e: change logical negate to bitwiseDan Carpenter1-1/+1
The bitwise negate is intended here. With the logical negate the condition is always false. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03sfc: Get port number from CS_PORT_NUM, not PCI function numberBen Hutchings2-1/+7
A single shared memory region used to communicate with firmware is mapped into both PCI PFs of the SFC9020 and SFL9021. Drivers must be able to identify which port they are addressing in order to use the correct sub-region. Currently we use the PCI function number, but the PCI address may be virtualised. Use the CS_PORT_NUM register field defined for just this purpose. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02net/fec: fix pm to survive to suspend/resumeEric Bénard1-8/+8
* in the actual driver, calling fec_stop and fec_enet_init doesn't allow to have a working network interface at resume (where a ifconfig down and up is required to recover the interface) * by using fec_enet_close and fec_enet_open, this patch solves this problem and handle the case where the link changed between suspend and resume * this patch also disable clock at suspend and reenable it at resume Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: count RX DMA OVR as rx_fifo_errorPhil Sutter1-1/+1
This way, RX DMA overruns (actually being caused by overrun of the 512byte input FIFO) show up in ifconfig output. The rx_fifo_errors counter is unused otherwise. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: use netdev_alloc_skb_ip_align() here, tooPhil Sutter1-2/+1
This patch completes commit 89d71a66c40d629e3b1285def543ab1425558cd5 which missed this spot, as it seems. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: fix deadlock on RX FIFO overrunPhil Sutter1-14/+13
By calling korina_restart(), the IRQ handler tries to disable the interrupt it's currently serving. This leads to a deadlock since disable_irq() waits for any running IRQ handlers to finish before returning. This patch addresses the issue by turning korina_restart() into a workqueue task, which is then scheduled when needed. Reproducing the deadlock is easily done using e.g. GNU netcat to send large amounts of UDP data to the host running this driver. Note that the same problem (and fix) applies to TX FIFO underruns, but apparently these are less easy to trigger. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02enic: bug fix: make the set/get netlink VF_PORT support symmetricalScott Feldman2-103/+104
To make get/set netlink VF_PORT truly symmetrical, we need to keep track of what items are set and only return those items on get. Previously, the driver wasn't differentiating between a set of attr with a NULL string, for example, and not setting the attr at all. We only want to return the NULL string if the attr was actually set with a NULL string. Otherwise, don't return the attr. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02bnx2: Fix hang during rmmod bnx2.Michael Chan1-1/+13
The regression is caused by: commit 4327ba435a56ada13eedf3eb332e583c7a0586a9 bnx2: Fix netpoll crash. If ->open() and ->close() are called multiple times, the same napi structs will be added to dev->napi_list multiple times, corrupting the dev->napi_list. This causes free_netdev() to hang during rmmod. We fix this by calling netif_napi_del() during ->close(). Also, bnx2_init_napi() must not be in the __devinit section since it is called by ->open(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01ath5k: wake queues on resetBruno Randolf1-14/+3
We can wake all queues after a chip reset since everything should be set up and we are ready to transmit. If we don't do that we might end up starting up with stopped queues, not beeing able to transmit. (This started to happen after "ath5k: clean up queue manipulation" but since periodic calibration also stopped and started the queues this effect was hidden most of the time). This way we can also get rid of the superfluous ath5k_reset_wake() function. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-01drivers/isdn/hardware/mISDN: Use GFP_ATOMIC when a lock is heldJulia Lawall1-2/+2
The function inittiger is only called from nj_init_card, where a lock is held. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @gfp exists@ identifier fn; position p; @@ fn(...) { ... when != spin_unlock_irqrestore when any GFP_KERNEL@p ... when any } @locked@ identifier gfp.fn; @@ spin_lock_irqsave(...) ... when != spin_unlock_irqrestore fn(...) @depends on locked@ position gfp.p; @@ - GFP_KERNEL@p + GFP_ATOMIC // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01ksz884x: Add missing validate_addr hookDenis Kirjanov1-0/+1
Add missing validate_addr hook Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01ksz884x: convert to netdev_tx_tDenis Kirjanov1-1/+1
Convert TX hook to netdev_tx_t type Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01virtio-net: pass gfp to add_bufMichael S. Tsirkin1-4/+4
virtio-net bounces buffer allocations off to a thread if it can't allocate buffers from the atomic pool. However, if posting buffers still requires atomic buffers, this is unlikely to succeed. Fix by passing in the proper gfp_t parameter. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01be2net: convert hdr.timeout in be_cmd_loopback_test() to le32Sathya Perla1-1/+1
The current code fails on ppc as hdr.timeout is not being converted to le32. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01can: mpc5xxx_can.c: Fix build failureAnatolij Gustschin1-5/+5
Fixes build error caused by the OF device_node pointer being moved into struct device. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31greth: Fix build after OF device conversions.David S. Miller1-6/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2034-80857/+206098
2010-05-30Merge branch 'for-next' of ↵Linus Torvalds47-955/+7260
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits) mfd: Rename twl5031 sih modules mfd: Storage class for timberdale should be before const qualifier mfd: Remove unneeded and dangerous clearing of clientdata mfd: New AB8500 driver gpio: Fix inverted rdc321x gpio data out registers mfd: Change rdc321x resources flags to IORESOURCE_IO mfd: Move pcf50633 irq related functions to its own file. mfd: Use threaded irq for pcf50633 mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read mfd: Fix pcf50633 bitfield logic in interrupt handler gpio: rdc321x needs to select MFD_CORE mfd: Use menuconfig for quicker config editing ARM: AB3550 board configuration and irq for U300 mfd: AB3550 core driver mfd: AB3100 register access change to abx500 API mfd: Renamed ab3100.h to abx500.h gpio: Add TC35892 GPIO driver mfd: Add Toshiba's TC35892 MFD core mfd: Delay to mask tsc irq in max8925 mfd: Remove incorrect wm8350 kfree ...
2010-05-30Merge branch 'next' of ↵Linus Torvalds3-0/+876
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: DMA40 U8500 platform configuration DMA: PL330: Add dma api driver
2010-05-30Merge branch 'for-linus' of ↵Linus Torvalds5-622/+203
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Remove DCA support until feature is finished IB/qib: Use a single txselect module parameter for serdes tuning IB/qib: Don't rely on (undefined) order of function parameter evaluation IB/ucm: Use memdup_user() IB/qib: Fix undefined symbol error when CONFIG_PCI_MSI=n
2010-05-30Merge branch 'for_linus' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Convert quota statistics to generic percpu_counter ext3 uses rb_node = NULL; to zero rb_root. quota: Fixup dquot_transfer reiserfs: Fix resuming of quotas on remount read-write pohmelfs: Remove dead quota code ufs: Remove dead quota code udf: Remove dead quota code quota: rename default quotactl methods to dquot_ quota: explicitly set ->dq_op and ->s_qcop quota: drop remount argument to ->quota_on and ->quota_off quota: move unmount handling into the filesystem quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers quota: move remount handling into the filesystem ocfs2: Fix use after free on remount read-only Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 06:55:25 +0300