summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2008-12-26net: PHYLIB mdio fixes #2Krzysztof Halasa2-8/+16
The PHYLIB mdio code has more problems in error paths: - mdiobus_release can be called before bus->state is set to MDIOBUS_REGISTERED - mdiobus_scan allocates resources which need to be freed - the comment is wrong, the resistors used are actually pull-ups. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26smsc911x: fix platform resource call during module unloadSteve Glendinning1-1/+1
This patch fixes a typo, the platform_get_resource calls in smsc911x_drv_remove are supposed to look the same as those in smsc911x_drv_probe. Reported and fixed by dfoley@telus.net. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26smsc911x: don't clobber driver_dataSteve Glendinning1-1/+0
smsc911x uses driver_data to store our net_device, don't overwrite this with the mii_bus. Reported and fixed by dfoley@telus.net. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26smsc911x: make smsc911x_ethtool_ops constantSteve Glendinning1-1/+1
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26smsc911x: convert driver to use net_device_opsSteve Glendinning1-10/+14
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26smsc911x: fix BUG if module is removed while interface is upSteve Glendinning1-3/+2
If the module is removed while its interface is up, smsc911x_stop is not called until after smsc911x_drv_remove has disposed of phy_dev. This patch changes the stop method to handle this situation. This is a different problem to the one reported by dfoley@telus.net. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-24Merge branch 'master' of ↵David S. Miller5-21/+25
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ppp_generic.c
2008-12-23net: Remove unused netdev arg from some NAPI interfaces.Neil Horman65-220/+209
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-23net: startup race in hso driverOliver Neukum1-2/+1
The flag marking a device running must be set before the URBs for recption are submitted or they may complete too early and fail to resubmit. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-23r6040: bump release number to 0.19Florian Fainelli1-2/+2
This patch bumps the release number of the driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-23r6040: save and restore MIER correctly in the interrupt routineJoe Chou1-2/+7
This patch saves the MIER register contents before treating interrupts, then restores them correcty at the end of the interrupt routine. Signed-off-by: Joe Chou <Joe.Chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-23r6040: fix wrong logic in mdio codeJoe Chou1-2/+2
This patch fixes a reverse logic in the MDIO code. Signed-off-by: Joe Chou <Joe.Chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22tg3: Update version to 3.97Matt Carlson1-2/+2
This patch updates the version number to 3.97. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22tg3: tg3.h cleanupsMatt Carlson2-35/+5
This patch cleans up the tg3 header file by removing the preprocessor definitions for standard PCI configuration space registers. The driver should be using the standard definitions when needed. The patch continues by removing redundant PHY related definitions and reorganizes some of the remaining entries. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22tg3: Remove unused cfgspc device membersMatt Carlson2-20/+7
This patch removes the pci_bist and pci_hdr_type members from the device structure and removes the code that references them. They are not really used. The patch rounds out the changes by moving the pci_cmd member to plug a structure hole that would have been created. On 32-bit systems, this movement removes a subsequent structure hole later in the structure. On 64-bit systems though, the movement merely consolidates two holes into one larger hole. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22tg3: Cleanup IPV6 LSOMatt Carlson2-24/+25
This patch attempts to make the relationship between IPV6 checksum offload and IPV6 LSO more obvious. The patch also toggles a bit needed for IPV6 LSO on 5785 and 57780 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22tg3: WOL fixesMatt Carlson1-3/+2
The first hunk of this patch inverts a flag that was accidentally toggled as part of commit 0a459aac9d151c2e36ec65723b9b845b24c5cbc3 ("tg3: Allow WOL for phylib controlled Broadcom phys"). The second hunk of the patch removes the call to device_may_wakeup() in the 5906 config detection path. At the point of the call, the driver shouldn't be querying for WOL capability. It should be detecting and setting it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22ixgbe: fix the display of DCB control stats in ethtoolDon Skidmore1-0/+7
Priority flow contol statistics for Data Center Bridging (DCB) weren't included in ethtool. This patch adds them. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: add DCNA attribute to the BCN interface for DCBDon Skidmore1-0/+20
Adds the Backward Congestion Notification Address (BCNA) attribute to the Backward Congestion Notification (BCN) interface for Data Center Bridging (DCB), which was missing. Receive the BCNA attribute in the ixgbe driver. The BCNA attribute is for a switch to inform the endstation about the physical port identification in order to support BCN on aggregated links. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2008-12-22net: fix DCB setstate to return success/failureDon Skidmore1-23/+29
Data Center Bridging (DCB) had no way to know if setstate had failed in the driver. This patch enables dcb netlink code to handle the status for the DCB setstate interface. Likewise it allows the driver to return a failed status if MSI-X isn't enabled. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22Merge branch 'master' of ↵David S. Miller37-548/+646
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-12-22Convert ixp4xx_eth driver to use net_device_ops.Krzysztof Hałasa1-5/+10
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22drivers/net/wan: Remove redundant testJulia Lawall1-3/+2
arg is checked not to be NULL a few lines before. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22HDLC_PPP: Fix Configure-Ack to return original options as required by the ↵Krzysztof Hałasa1-5/+6
standard. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: move common debugging from network drivers to QMGR module.Krzysztof Hałasa2-86/+23
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22WAN: Add IXP4xx HSS HDLC driver.Krzysztof Hałasa3-0/+1365
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Add ethtool support to Ethernet driver.Krzysztof Hałasa1-0/+45
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Add PHYLIB MII ioctl to the Ethernet driver.Krzysztof Hałasa1-1/+3
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Add PHYLIB support to Ethernet driver.Krzysztof Hałasa2-100/+96
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Make the Ethernet driver use built-in netdev stats.Krzysztof Hałasa1-16/+8
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Silence section mismatch warning in Ethernet driver.Krzysztof Hałasa1-3/+3
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-19b43: Add key memory dumpingMichael Buesch3-2/+53
This adds an option to dump all crypto related memory to the kernel log. Obviously, it should not be enabled on productive systems. ;) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19b43: Suspend MAC while killing the radioMichael Buesch1-0/+2
We should suspend the MAC, before we kill the radio. This gives the MAC a chance to leave any TX/RX state and it avoids races on the PHY/RADIO registers. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath5k: correct packet length in tx descriptorsBob Copeland3-6/+11
Packet length calculation (which includes frame check sequence) should take into account whether we add a pad field or not. Extract the calculation into a helper and use it in both places. Changes to desc.c Changes-licensed-under: ISC Changes to ath5k.h, base.c Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19b43: Fix some MAC lockingMichael Buesch3-44/+30
This fixes some locking w.r.t. the lower MAC (firmware). It also removes a lot of ancient IRQ-locking that's not needed anymore. We simply suspend the MAC. That's easier and causes less trouble. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: iwl-tx.c cleanup (remove unused parameter and unused local variable).Rami Rosen1-5/+3
This patch removes unused parameter and unused local variable in methods in iwl-tx.c: - Remove a parameter (is_unicast) from iwl_tx_cmd_build_basic(). - Remove an unused variable name unicast from iwl_tx_skb(). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fixed RX decryption status reportingJouni Malinen1-14/+12
The RX code in ath9k uses sc_keymap to figure out whether a default key was used. However, the default key entries in sc_keymap were always set and as such, frames could have been claimed to be decrypted by hardware when they were not. This can cause problems especially with TKIP since mac80211 is validating the Michael MIC in the frame and this will result in MIC failure and potentially TKIP countermeasures if the frame was not decrypted correctly. Change key cache slot allocation to mark only the keys that really have been used in sc_keymap to avoid the issue. The key cache slot selection routines are now internally avoiding the slots that may be needed for TKIP group keys. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix key cache slot selection for splitmicJouni Malinen1-2/+2
ath_reserve_key_cache_slot() was obviously supposed to return an index to a free slot, not reserved one. This could have caused problems with hardware revisions that use splitmic. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Protect config() callback with a mutexSujith2-0/+6
This should fix the timeout issues seen when using wpa_supplicant. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19p54usb: bring first generation devices back to lifeChristian Lamparter1-2/+4
This patch fixes a serious regression (introduced by: "p54: fix memory management") that affected isl3886+net2280 usb devices operation. Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Artur Skawina <art.08.09@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Key cache allocation for AP modeJouni Malinen1-68/+132
Enhance allocation of key cache entries to support multiple pairwise keys to fix AP mode with more than one associated STA. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix a NULL pointer dereference in ath_rate_getJouni Malinen1-1/+2
It looks like mac80211 may try to send unicast frames to a STA that does not have a STA entry. We need to make sure that that is caught in the rate control code before dereferencing STA data. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: indicate txpower is off in sysfsJay Sternberg1-1/+5
The patch checks if the radio is disabled before displaying the tx power level. Previously when the txpower was set off show_tx_power still returned the prior power level. Now it will indicate the power has been turned off. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: use GFP_KERNEL to allocate Rx SKB memoryZhu Yi2-21/+20
Previously we allocate Rx SKB with GFP_ATOMIC flag. This is because we need to hold a spinlock to protect the two rx_used and rx_free lists operation in the rxq. spin_lock(); ... element = rxq->rx_used.next; element->skb = alloc_skb(..., GFP_ATOMIC); list_del(element); list_add_tail(&element->list, &rxq->rx_free); ... spin_unlock(); After spliting the rx_used delete and rx_free insert into two operations, we don't require the skb allocation in an atomic context any more (the function itself is scheduled in a workqueue). spin_lock(); ... element = rxq->rx_used.next; list_del(element); ... spin_unlock(); ... element->skb = alloc_skb(..., GFP_KERNEL); ... spin_lock() ... list_add_tail(&element->list, &rxq->rx_free); ... spin_unlock(); This patch should fix the "iwlagn: Can not allocate SKB buffers" warning we see recently. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: use meaningful vars in _iwl_poll_bit()Wu, Fengguang1-5/+6
Rename vars in _iwl_poll_bit() to better reflect the truth. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: remove useless gotoWu Fengguang2-12/+4
The patch removes some useless goto in code cleanup. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: use type uint for module param debugWu, Fengguang4-5/+5
This enables one to change the debug level at bit 31. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: update comments on the debug interfaceWu, Fengguang2-11/+8
Bring up-to-date some comments on the location of debug files. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: add line feed to printkWu, Fengguang1-1/+1
This adds line feed to printk. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: cleanup iwl-dev.hWinkler, Tomas4-32/+14
The patch removes unused definition and moves code to proper places. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 05:52:34 +0300