summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-12-02ath5k: Add initial registers values for radio RF2317 chip.Felix Fietkau1-0/+23
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Add a function to read chipset's MAC revisionFelix Fietkau3-5/+16
Add bus dependent revision read function which is used to determine chipset's MAC before hardware is initialized. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Check if pci pdev struct is initialized in common functions.Felix Fietkau4-8/+10
To be able to support other busses than PCI check if pci device structure is initialized. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Use generic eeprom read from common ath_bus_opts struct.Felix Fietkau4-37/+45
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Move PCI bus functions to separate file.Felix Fietkau4-266/+289
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Introduce ath5k_init_softc function as in ath9kFelix Fietkau5-153/+217
Split pci initialization into hardware specific functions and softc structure initialization. Make function naming similar to ones ath9k. Introduce ath_bus_opts in ath5k for later AHB bus integration. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Use Generic DMA for later support of AHB bus.Felix Fietkau2-31/+39
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02Merge branch 'master' of ↵John W. Linville2-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2010-12-02wireless: ray_cs: use '%pm' format option to print MACAndy Shevchenko1-10/+4
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath9k_htc: Remove unused structuresSujith Manoharan1-19/+0
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02wireless: Remove unnecessary casts of usb_get_intfdataJoe Perches5-16/+10
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02b43: N-PHY: fix code path on PHY initRafał Miłecki1-10/+7
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02b43: N-PHY: use defines for RSSI typesRafał Miłecki1-28/+45
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02b43: N-PHY: fix RSSI selectionRafał Miłecki1-13/+25
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath9k: hif_usb: Reduce indent 1 columnJoe Perches1-53/+53
Invert test and return early. Move variable declarations to local scope. Don't initialize variables to 0 unnecessarily. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath9k: Move debugfs under ieee80211/[phyname]/ath9k/Ben Greear3-69/+12
This fixes debugfs problems when a phy is renamed, and is able to remove a bit of code that is no longer needed. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02b43: N-PHY: fix RSSI calibrationRafał Miłecki1-6/+8
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02b43: N-PHY: initialize perical variable, add missing call to CCA resetRafał Miłecki1-0/+4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02b43: N-PHY: implement very basic TX power control managementRafał Miłecki2-8/+153
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02b43: N-PHY: swap values for radio registers 0x3b and 0x3cRafał Miłecki1-123/+123
Specs were updated plus we become wl compatible. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ssb: Add sysfs attributes to ssb devicesHauke Mehrtens1-0/+30
Make it possible to read out the attributes, till now only show on dmesg, through sysfs. This patch was some time in OpenWrt. Signed-off-by: Bernhard Loos <bernhardloos@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ssb: extract indexes for power tablesRafał Miłecki1-0/+44
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6 ↵Gustavo F. Padovan2-3/+13
into test
2010-12-01Bluetooth: Add new PID for Atheros 3011Bala Shanmugam2-0/+7
Atheros 3011 has small sflash firmware and needs to be blacklisted in transport driver to load actual firmware in DFU driver. Signed-off-by: Bala Shanmugam <sbalashanmugam@atheros.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-12-01Bluetooth: Fix log spamming in btusb due to autosuspendStefan Seyfried1-3/+6
If a device is autosuspended an inability to resubmit URBs is to be expected. Check the error code and only log real errors. (Now that autosuspend is default enabled for btusb, those log messages were happening all the time e.g. with a BT mouse) Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com> Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-30iwlagn: fix microcode error on 4965Stanislaw Gruszka1-0/+2
Commit dbbf1755b09eef8ff6dd21c8dafe1606f051ce12 "iwlwifi: use antenna information in EEPROM" caused 4965 device breakage with "Microcode SW error detected. Restarting 0x82000000." message. This patch reverts 4965 part of that commit. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30mac80211/rt2x00: add ieee80211_tx_status_ni()Johannes Stezenbach3-3/+8
All rt2x00 drivers except rt2800pci call ieee80211_tx_status() from a workqueue, which causes "NOHZ: local_softirq_pending 08" messages. To fix it, add ieee80211_tx_status_ni() similar to ieee80211_rx_ni() which can be called from process context, and call it from rt2x00lib_txdone(). For the rt2800pci special case a driver flag is introduced. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Set turbo bit on rf bank 2Nick Kossifidis2-3/+29
* A diff between rfbuffer settings of turbo and non-turbo modes indicates there is a bit on bank 2 related to turbo operation (it's set on turbo modes). This bit is present on all radios except RF5413 that seems to have a completely different bank 2. Also since 2317 has the same rf-registers locations with 2425 and since the bit exists on 2317 I assume it also exists on 2425/2417). So in case we use turbo mode (40MHz) enable it on bank modification. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Clean up turbo mode initvals/rfregsNick Kossifidis5-976/+577
* Clean up what's left of turbo mode, since we handle all register modifications (rfbuffer comes next) on code there is no need to have duplicated arrays. * Rename change_channel to skip_pcu on initvals.c as we did on reset.c Signed-off-by: Nick Kossifidis <micklfemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Cleanup turbo channel flagsNick Kossifidis4-43/+10
* Clean up CHANNEL_T(URBO), use AR5K_BWMODE_40MHZ instead Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Use correct clock when setting ofdm timingsNick Kossifidis1-2/+14
* Use correct clock value when setting OFDM timings on non-default bwmodes. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Skip tx power setting on AR5210 for nowNick Kossifidis1-0/+3
* Don't return -EINVAL when trying to set tx power on RF5110 because AR5210 reset will fail. We need to add support for RF5110 and AR5210 eeprom in the future but for now just skip it. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Tweak phy activate to rx start delay based on bwmodeNick Kossifidis1-4/+7
* Tweak phy activation -> rx delay for different bwmodes Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: No need to save/restore staid flags on resetNick Kossifidis1-21/+1
* Since we set antenna flags on phy init and ack bitrate mode on pcu init, there is no need to save/restore sta_id flags on ath5k_hw_reset. Also we don't need to re-set our mac address because it's not affected by resets. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Support synth-only channel change for AR2413/AR5413Nick Kossifidis4-134/+218
* Add synth-only channel change for AR2413/5413. When we call ath5k_reset with a channel ath5k_hw_reset will first try to set channel on PHY while PHY is running instead of doing a normal full reset. To do this phy_init has to change to implement this functionality. * Clean up change_channel flag, what it really did was skip PCU registers when setting initvals. This is done because on reset PCU registers are not affected (except the registers we set in pcu init and -due to hw problems- TSF). Use a new skip_pcu flag that's not misleading instead. In the future we might use that to also skip PCU reset and save us the TSF etc problems (needs testing because standard practice is to reset everything). * Use fast channel change only when setting channel, and set skip_pcu to false only on init. When we reset the card due to DMA or PHY problems skip pcu but never do a fast channel change. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Skip powertable setting when we are on the same channelNick Kossifidis1-23/+42
* Only set power table if we are changing channel/mode there is no need to recalculate and reset the power table all the time. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Update PLL programming for turbo/half/quarterNick Kossifidis1-5/+23
* Set correct PLL settings for each bwmode Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Update spur mitigation filter for turbo/half/quarterNick Kossifidis1-21/+32
* Add spur mitigation filter support for half/quarter and turbo. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Tweak power detector delays on RF5111/RF5112Nick Kossifidis1-2/+30
* Tweak power detector delays on AR5111/AR5112 when using half/quarter modes. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Always set IFS intervals on resetNick Kossifidis3-1/+10
* Make sure we always set IFS timings even if no coverage class is set. If we don't we'll miss the needed changes for different bwmodes. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Use turbo flag on DCUNick Kossifidis1-0/+5
* Set AR5K_DCU_GBL_IFS_MISC_TURBO_MODE flag on DCU when operating on 40MHz Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Set all IFS intervals, not just slot timeNick Kossifidis4-243/+308
* Replace set_slot_time with set_ifs_intervals that also sets the various inter-frame space intervals based on current bwmode. * Clean up AR5210 mess from reset_tx_queue, AR5210 only has one data queue and we set IFS intervals for that queue on set_ifs_intervals so there is nothing left to do for 5210 on reset_tx_queue. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Extend rate_durationNick Kossifidis3-46/+129
* Extend ieee80211_generic_frame_duration to support the various bwmodes. * Better document what's going on with ack bitrates and update write_rate_duration to support the standard ack bitrates (when we don't set the high bit). * Get rid of set_ack_bitrate_high and introduce a flag on ath5k_hw for this (we only called the function on init anyway so there is no difference). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Extend get_default_sifs/slot_timeNick Kossifidis3-24/+68
* Extend get_default_sifs/slot_time to include timings for turbo half and quarter rate modes. * AR5210 code for now uses timings already on core clock units instead of usecs so rename them (we 'll clean it up later). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Move tx retries setting outside reset_tx_queueNick Kossifidis1-36/+56
* Move setting of tx retry limits on a separate function (we 'll clean up this AR5210 mess later) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Increase PHY settling parameters for turo modeNick Kossifidis4-29/+52
* On turbo mode increase PHY settling times, note that we only increase switch settling time on AR5212 as indicated by initvals. * A few cleanups: Move frame control settings for AR5210 from reset_tx_queue to tweak_initvals and remove phy_scal settings from tweak_initvals (we tweak them alread on set_sleep_clock). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Small cleanup on tweak_initvalsNick Kossifidis2-15/+4
* Now that we properly set rx/tx latencies for AR5311 remove that old buggy part of code left inside ath5k_hw_tweak_initval_settings that was never executed (you can't have an RF5112 radio on a mac older than AR5212). Also use a magic value for 5311 PHY_SCAL value. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Put core clock initialization on a new functionNick Kossifidis4-27/+134
* Handle all usec parameters in one function. It's much cleaner this way. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Add new field on ath5k_hw to track bandwidth modesNick Kossifidis4-11/+16
* Prepare for half/quarter/turbo support, introduce a new ah_bwmode parameter and get rid of ah_turbo. Bwmode stands for "bandwidth mode" and can have 4 values, default (20MHz), turbo (40MHz), half rate (10MHz), and quarter rate (5MHz). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Use new function to stop beacon queueNick Kossifidis3-6/+25
* Since we only use ath5k_hw_stop_tx_dma to stop the beacon queue, introduce a new function ath5k_hw_stop_beacon_queue so that we can use that instead and have better control. In the future we can add more beacon queue specific stuff there (maybe tweak beacon timers or something), for now just call ath5k_hw_stop_tx_dma. * Also since we don't call ath5k_hw_stop_rx/tx_dma from outside dma.c, make them static. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 02:55:24 +0300