summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-04-11[SCSI] mpt2sas: Bump version 05.100.00.02Kashyap, Desai1-2/+2
Upgrade version to 05.100.00.02 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas: Before removing sas_device search device in list for ↵Kashyap, Desai1-3/+8
_scsih_sas_device_remove Fix a oops in _scsih_sas_device_remove. The driver was attempting to delete a object from the sas_device link list when the object was not present. Added sanity check for sas_device NULL dereference. before deleting sas_device now driver will search device in list then only it will follow device removal. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas: Reworked scmd->result priority for _scsih_qcmd.Kashyap, Desai1-7/+14
we added support to set the deleted flag prior to device scan, then clear the flag for responding devices, leaving the deleted flag only set for missing devices. The problem is for internal generated host resets, IO queues are not blocked at scsi mid layer level. IO will be continued sent to driver, and driver will return SCSI_MLQUEUE_HOST_BUSY. The problem is the driver checks for the deleted flag before it checks for the controller being in reset, so there is a window where the driver would be returning DID_NO_CONNECT for responding devices. This occurs during the time between calling _scsih_prep_device_scan, and _scsih_mark_responding_sas_device & _scsih_mark_responding_raid_device. Fix the queuecommand entry point so ioc->shost_recovery flag sanity check is given higher presidence then the device "deleted flag" check. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Update Driver version to 8.3.12James Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Fix discovery issuesJames Smart7-5/+105
- Add code to prevent unreg_vpi mailbox command from failing. - Add code to reset the HBA if unreg_vpi mailbox fails with busy status. - Remove code that was clearing the nlp_type stored during rport discovery. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: BSG Fixes and enhancementsJames Smart4-39/+253
- Add memcpy to mailbox completion to transfer reply correctly. - Add support for BSG mailbox commands (dump, update_cfg, and event_log_status). - Add warning message and refuse mailbox command while mgmt is blocked. - Add checks for memory allocation failure. - Add check for sli4 dump zero BDE size. - Only copy data if mailbox commands succeed. - Add support for Read Event Log mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Critical fixesJames Smart6-35/+56
- Move the code to increase the sg seg count for LP21000 adapters. - Check pcmd on command completion before dereferencing it. - Clear queue memory when creating firmware queues to prevent stale entries. - Replace the use of PAGE_SIZE in many areas that assumed it was always 4k. - Add an else clause to a conditional that needed to unlock the hba_lock. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: T10-PI/DIF changesJames Smart2-139/+177
Update driver for change in T10-PI interface on adapter - Remove Profiles. - Add new SLI Opcodes. - Add new PDE structures used for BlockGuard. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Miscellaneous ChangesJames Smart2-7/+15
- Prevent log message 1801 during vport delete. - Enable NPIV by default. - Display correct value for max Vports on SLI4 HBAs. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Emulex SLI enhancementsJames Smart7-20/+187
- Add the new Logical Link speed event support. - Add RATOV and EDTOV to the REG_VFI mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas: Upgrade version 05.100.00.01Kashyap, Desai1-2/+2
Upgraded version string. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas: Check for NULL pointer before free_pages is added.Kashyap, Desai1-1/+4
Added check before free_pages just to make sure ioc->scsi_lookup is not NULL. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas: Added support for PCIe Advanced Error Recovery.Kashyap, Desai2-0/+124
Added support in the driver to support EEH and PCIe Advanced Error Recovery. This involves adding new pci_error_handler interface for recovering the controller from PCI Bus errors, such as SERR and PERR. Some tools are available for simulating PCI errors in order to validate this interface: http://www.kernel.org/pub/linux/utils/pci/aer-inject Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas: Send default descriptor for RAID pass through in mpt2ctlKashyap, Desai1-2/+5
RAID_SCSI_IO_PASSTHROUGH: Driver needs to be sending the default descriptor for RAID Passthru, currently its sending SCSI_IO descriptor. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas: sanity added to remove duplicate port from topologyKashyap, Desai2-0/+86
There are few special cases which needs to be handled deleting old port. CASE1: In topology you need cascaded expanders. Through sysfs just make sure topology is up. Erase the manufacturing image of the cascaded expander and reset the board. In some cases Adapter will receive Exapnder Add event before expander delete. In such a case, driver needs to delete duplicate port before adding new port. CASE2: Enable Device Missing delay of HBA through lsiutils. If expander or end device is hotswapped with different device before DMD timer expires, driver will get device add for new device first and then device deletion event for the original devices will arrive later at DMD timer expires. In this case also driver need to delete duplicate port before adding port for new device. Added new function which will make sure when new port is added, that its not claiming the same phy resources already in use by another port. If it does, then it will delete the other port before adding the new port. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] scsi_debug: add max_queue + no_uld parametersDouglas Gilbert1-16/+57
While testing the midlevel q_at_head and q_at_tail patch for sg and the block SG_IO ioctl I found it useful to reduce the queuing within the scsi_debug driver. The reason is that the midlevel queue only comes into play when the corresponding LLD queue is full. It is also useful when testing to be confident that your program is the only thing issuing commands to the (virtual) scsi_debug device. The no_uld=1 parameter will stop a scsi_debug virtual disk appearing as /dev/sd* . Changelog: - add max_queue parameter to reduce the number of queued commands the driver will accept. This parameter can be changed after the driver is loaded. - add no_uld parameter that restricts scsi_debug's virtual devices to the sg and bsg drivers - correct stale url Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] sd: retry read_capacity on UNIT_ATTENTIONJames Bottomley1-3/+20
Hazard testing uncovered yet another bug in sd. Under heavy reset activity the retry counter might be exhausted and the command will be returned with sense UNIT_ATTENTION/0x29/00 (POWER ON, RESET, OR BUS DEVICE RESET OCCURRED). In those cases we should just increase the retry counter again, retrying one more to clear up this Unit Attention state. [jejb: update to work with RC16 devices and not to loop endlessly] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas : IOs needs to be pause until handles are refreshed for all ↵Kashyap, Desai1-9/+40
device after recovery After Host Reset firmware will have new list of device handles for the target. Device handle refresh in driver is part of Rescan topology logic. (See functions like *_search_responding_*). This needs to be done from Host Reset context before making shost_recovery to 0. Currently it is done in Firwmare event context, which may leads IO to a wrong device. Now handler refresh is moved to HBA reset context. Apart from this, Now driver will stop IOs for all device setting deleted flag to 1 at the time of HBA Reset through _scsih_prep_device_scan. It will only unblock devices, if devices has been found as part of RESCAN. This way it will make more safe IO blocking at the time of HBA reset at mpt2sas driver layer. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] sd: quiet spurious error messages in READ_CAPACITY(16)Hannes Reinecke1-0/+2
sd always tries to submit a READ_CAPACITY(16) CDB, regardless whether the host actually supports it. queuecommand() will then return DID_ABORT, which is not qualified enough to detect the true cause here. So better check in sd_try_rc16 first if the cdblen is supported. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] bnx2i: Update version and module descriptionAnil Veerabhadrappa1-3/+4
missing 10G drivers added to description Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] bnx2i: link bnx2i hba and cnic device before registering the deviceAnil Veerabhadrappa1-2/+2
When bnx2/cnic/bnx2i drivers are loaded in certain order, bnx2i will will not initialize the device correctly because 'hba->cnic' will be NULL when bnx2i_start() is called from register_device() context. Under this condition 'ifdown' and 'ifup' of associated network interface is required to bring iscsi adapter state to ready state so that it will accept iscsi connection setup within the chip Initializing 'hba->cnic' before calling register_device() will fix this issue Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] bnx2i: make firmware use statsn field when constructing headerAnil Veerabhadrappa1-1/+1
instruct firmware to use driver/iscsid provided expected statsn field while constructing login pdu header. Initialize 'flags' to instruct chip to use driver/iscsid provided ExpStatSN value while constructing iSCSI login PDU header Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi ehChristof Schmitt1-5/+13
The return code FAST_IO_FAIL from fc_block_scsi_eh indicates that the pending I/O requests have been terminated as a result of the fast_io_fail_tmo. Pass this return code back to the scsi eh to stop the scsi eh in this case. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] Allow FC LLD to fast-fail scsi eh by introducing new eh returnChristof Schmitt2-10/+25
If the scsi eh is running and then a FC LLD calls fc_remote_port_delete, the SCSI commands sent from the eh will fail. To prevent this, a FC LLD can call fc_block_scsi_eh from the eh callback, blocking the eh thread until the dev_loss_tmo fires or the remote port is available again. If (e.g. for a multipathing setup) the dev_loss_tmo is set to a very large value, thus preventing the scsi device removal , the scsi eh can block for a long time. For multipathing, the fast_io_fail_tmo is then set to a low value to detect path problems sooner. This patch introduces a new return code FAST_IO_FAIL. The function fc_block_scsi_eh now returns FAST_IO_FAIL when the fast_io_fail_tmo fires. This indicates that the LLD terminated all pending I/O requests and there are no more pending SCSI commands for the scsi eh to wait for. This return code can be passed back to the scsi eh to stop the escalation and finish the recovery process for this device. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] qla2xxx: Fix documentation of ql2xfdmienable module parameterFerenc Wagner1-2/+2
The default is enabled since 7e47e5ca184548341a82eeb2238ee3622c43cae1. Signed-off-by: Ferenc Wagner <wferi@niif.hu> Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] qla2xxx: General checkpatch corrections.Andrew Vasquez5-60/+69
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] qla2xxx: Fix to make conditional decision based on port number.Sarang Radke1-2/+2
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] qla2xxx: Free DMA memory only if it is allocated in vendor specific ↵Harish Zunjarrao1-2/+4
BSG command The qla84xx_mgmt_cmd function supports multiple subcommands. Some subcommands require DMA memory and some do not. Therefore check before freeing DMA memory whether it is allocated or not. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] qla2xxx: Add APEX support.Sarang Radke7-4/+518
Allows priority setting for FCP_CMNDs. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] qla2xxx: Re-organized BSG interface specific code.Giridhar Malavali7-831/+1230
1. Segregate BSG interface specific code to new files. 2. Handle multiple vendor specific commands indepedently. 3. Reorganised support for reset, management and update FCoE firmware commands. 4. Fixed memory leak issue in Loopback. 5. Added new vendor command to support iiDMA using BSG interface. 6. Proper cleanup of dma mapped and dma allocated buffers for BSG request. [jejb: fix up conflict and merge in Jiri Slaby lock imbalance patch] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] bfa: sg addr big endian fixJing Huang2-2/+17
sg address in IO request is not set up correctly for big endian platform. add new macros to properly swap the address. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] bfa: protect idr using bfad_mutexJing Huang3-5/+11
idr is a global resource, protect it with global bfad_mutex. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] bfa: use pci_iomap() and pci_iounmap()Jing Huang2-9/+1
Use pci_iomap() and pci_iounmap() to simplify the code. Remove uncessary #ifdef check for ia64 (it was added as a workaound for some RHEL 5.x release which doesn't export iounmap function) Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] bfa: fix the issue of not handling scsi_cmnd sg chaining caseJing Huang2-34/+17
Currently the driver doesn't take into consideraion of possible sg chaining when it walks through the sg list. This is fixed by using the sg_next() which automatically handles the chaining case. Obosolete code is removed as a result of this change. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] bfa: add fc transport class based vport create/deleteJing Huang5-33/+239
Use duplicate fc transport template for physical and vitual port. Add vport create/delete/disalbe functions in the transport template of physical port. Changes to make the vport create/delete function to work under this framework. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] don't kfree an initialized struct deviceAlan Stern1-2/+1
This patch (as1359) fixes a bug in scsi_alloc_target(). After a device structure has been initialized (and especially after its name has been set), it must not be freed directly. One has to call put_device() instead. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] don't reap targets upon device_add failureAlan Stern1-3/+0
This patch (as1358) fixes a bug in the error pathway of scsi_target_add(). If registration fails, the target should not be reaped. The reaping occurs later, when scanning is finished and all the child devices are removed. The current code leaves an unbalanced value in starget->reap_ref. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Bump version 03.04.15Kashyap, Desai1-2/+2
Upgrade version from 3.04.14 to 3.04.15 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Proper error handling is added after mpt_config timeoutKashyap, Desai1-5/+11
Added proper error handling after mpt_config. Now check of MPI_IOCSTATUS_CONFIG_INVALID_PAGE is added. If error is MPI_IOCSTATUS_CONFIG_INVALID_PAGE, driver will return -ENODEV. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Event data alignment with 4 byte.Kashyap, Desai1-1/+1
event_data needs to be 4 byte aligned to makes sure there is no unaligned memory access take place. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Check for command status is added after completion.Kashyap, Desai1-10/+16
1) Corrected name string as "MPT SAS HOST" 2) Added proper check conditions for MPT_MGMT_STATUS_COMMAND_GOOD. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Task abort is not supported for VolumesKashyap, Desai1-1/+13
1) corrected return value as SUCCESS instead of 0. 2) Added check in mptscsih_abort. mptfusion do not support task abort for Volumes. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: sanity check for vdevice pointer is addedKashyap, Desai3-0/+26
Added sanity checks before accessing vdevice and added vdevice->deleted setting for mptfc. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Setting period,offset and width for SPI driverKashyap, Desai1-0/+5
Set factor, offset and width while target negotiation. Added config timeout 60 seconds. It was missing for only mptspi_read_spi_device_pg0 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Proper bus_type check is addedKashyap, Desai3-1/+12
Added proper bus_type check before processing event/ reset handler. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: mpt_detach is called properly at the time of rmmodKashyap, Desai2-5/+6
Current design of mptsas is as follow. MPTSAS will do probe() if pci id matches for available card in system, irrespective of mode of controller. If controller is I/T mode or I mode, things are fine. If controller is only in T mode, mptsas is not doing complete process of mptsas_probe(). It will only make sure IOC structure is created and IOC reference is available for mptstm driver. Now While removing module we should take care case of Target mode only mptsas. If we are removing IOC which is only in Target mode, We should only detach IOC instead of following rest of the cleanup process which is only required for T mode controller. Now For T mode controller, only part clean up is done instead of complete cleanup. mpt_detach will call early in case of Target mode only controller. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: mpt config will do Hard Reset based upon retry countsKashyap, Desai1-2/+7
mpt_config would only attempt a MUR before retrying the command. The driver will now retry a second time with a hard reset before leaving the function. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Updated SCSI IO IOCTL error handling.Kashyap, Desai1-75/+86
Behavior changes only for IOCTLs that time out. Current behavior of Bus Reset remains the same for RAID Passthru Timeouts Current behavior of Diagnostic reset for any other type of IOCTL remains the same CHANGE: For IOCTL SCSI IOs that timeout, a Target Reset TM is sent, instead of Bus Reset. All error handing from that point is the same as what the driver currently does, which is to say that if the Device Reset TM fails it escalates do diagnostic reset. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Added new less expensive RESET (Message Unit Reset)Kashyap, Desai5-10/+177
Message Unit Reset - instructs the IOC to reset the Reply Post and Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. All posted buffers are freed, and event notification is turned off. IOC doesnt reply to any outstanding request. This will transfer IOC to READY state. Message unit ready is less expensive operations than Hard Reset. soft reset will not force Firmware to reload again, it only do clean up of Message units. mpt_Soft_Hard_ResetHandler will first try for Soft Reset,if it fails then go for big hammer reset which is Hard Reset. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mpt2sas: Bump version 05.100.00.00Kashyap, Desai1-4/+4
Upgraded version string. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-09 05:48:21 +0300