summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-09dpaa2-eth: extract the S/G table buffer cache interaction into functionsIoana Ciornei1-24/+37
The dpaa2-eth driver uses in certain circumstances a buffer cache for the S/G tables needed in case of a S/G FD. At the moment, the interraction with the cache is open-coded and couldn't be reused easily. Add two new functions - dpaa2_eth_sgt_get and dpaa2_eth_sgt_recycle - which help with code reusability. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09dpaa2-eth: allocate a fragment already alignedIoana Ciornei1-6/+5
Instead of allocating memory and then manually aligning it to the desired value use napi_alloc_frag_align() directly to streamline the process. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09dpaa2-eth: rearrange variable declaration in __dpaa2_eth_txIoana Ciornei1-4/+4
In the next patches we'll be moving things arroung in the mentioned function and also add some new variable declarations. Before all this, cleanup the variable declaration order. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-pf: PFC config support with DCBxHariprasad Kelam7-8/+271
Data centric bridging designed to eliminate packet loss due to queue overflow by adding enhancements to ethernet network such as proprity flow control etc. This patch adds support for management of Priority flow control(PFC) on Octeontx2 and CN10K interfaces. To enable PFC for all priorities dcb pfc set dev eth0 prio-pfc all:on/off To enable PFC on selected priorites dcb pfc set dev eth0 prio-pfc 0:on/off 1:on/off ..7:on/off With the ntuple commands user can map Priority to receive queues. On queue overflow NIX will assert backpressure such that PFC pause frames are genarated with mapped priority. To map priority 7 to Queue 1 ethtool -U eth0 flow-type ether dst xx:xx:xx:xx:xx:xx vlan 0xe00a m 0x1fff queue 1 Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Flow control resource managementHariprasad Kelam9-48/+276
CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Priority flow control configuration supportSunil Kumar Kori7-15/+251
Prirority based flow control (802.1Qbb) mechanism is similar to ethernet pause frames (802.3x) instead pausing all traffic on a link, PFC allows user to selectively pause traffic according to its class. Oceteontx2 MAC block (CGX) and CN10K Mac block (RPM) both supports PFC. As upper layer mbox handler is same for both the MACs, this patch configures PFC by calling apporopritate callbacks. Signed-off-by: Sunil Kumar Kori <skori@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Don't enable Pause frames by defaultHariprasad Kelam6-80/+44
Current implementation is such that 802.3x pause frames are enabled by default. As CGX and RPM blocks support PFC (priority flow control) also, instead of driver enabling one between them enable them upon request from PF or its VFs. Also add support to disable pause frames in driver unbind. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nextDavid S. Miller5-8/+42
-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-02-08 Joe Damato says: This patch set makes several updates to the i40e driver stats collection and reporting code to help users of i40e get a better sense of how the driver is performing and interacting with the rest of the kernel. These patches include some new stats (like waived and busy) which were inspired by other drivers that track stats using the same nomenclature. The new stats and an existing stat, rx_reuse, are now accessible with ethtool to make harvesting this data more convenient for users. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09Netvsc: Call hv_unmap_memory() in the netvsc_device_remove()Tianyu Lan1-8/+16
netvsc_device_remove() calls vunmap() inside which should not be called in the interrupt context. Current code calls hv_unmap_memory() in the free_netvsc_device() which is rcu callback and maybe called in the interrupt context. This will trigger BUG_ON(in_interrupt()) in the vunmap(). Fix it via moving hv_unmap_memory() to netvsc_device_ remove(). Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver") Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09Merge branch '1GbE' of ↵David S. Miller3-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2022-02-07 Corinna Vinschen says: Fix the kernel warning "Missing unregister, handled but fix driver" when running, e.g., $ ethtool -G eth0 rx 1024 on igc. Remove memset hack from igb and align igb code to igc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09ptp_pch: Remove unused pch_pm_opsAndy Shevchenko1-6/+0
The default values for hooks in the driver.pm are NULLs. Hence drop unused pch_pm_ops. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220207210730.75252-6-andriy.shevchenko@linux.intel.com Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09ptp_pch: Convert to use managed functions pcim_* and devm_*Andy Shevchenko1-63/+10
This makes the error handling much more simpler than open-coding everything and in addition makes the probe function smaller an tidier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220207210730.75252-5-andriy.shevchenko@linux.intel.com Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09ptp_pch: Switch to use module_pci_driver() macroAndy Shevchenko1-19/+1
Eliminate some boilerplate code by using module_pci_driver() instead of init/exit, and, if needed, moving the salient bits from init into probe. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220207210730.75252-4-andriy.shevchenko@linux.intel.com Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09ptp_pch: Use ioread64_hi_lo() / iowrite64_hi_lo()Andy Shevchenko1-9/+4
There is already helper functions to do 64-bit I/O on 32-bit machines or buses, thus we don't need to reinvent the wheel. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220207210730.75252-3-andriy.shevchenko@linux.intel.com Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09ptp_pch: Use ioread64_lo_hi() / iowrite64_lo_hi()Andy Shevchenko1-36/+10
There is already helper functions to do 64-bit I/O on 32-bit machines or buses, thus we don't need to reinvent the wheel. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220207210730.75252-2-andriy.shevchenko@linux.intel.com Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09ptp_pch: use mac_pton()Andy Shevchenko1-31/+10
Use mac_pton() instead of custom approach. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20220207210730.75252-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09bonding: switch bond_net_exit() to batch modeEric Dumazet2-9/+19
cleanup_net() is competing with other rtnl users. Batching bond_net_exit() factorizes all rtnl acquistions to a single one, giving chance for cleanup_net() to progress much faster, holding rtnl a bit longer. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09et131x: support arbitrary MAX_SKB_FRAGSEric Dumazet1-4/+10
This NIC does not support TSO, it is very unlikely it would have to send packets with many fragments. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220208004855.1887345-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09Merge branch 'iwl-next' of ↵Jakub Kicinski1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux Nguyen, Anthony L says: ==================== iwl-next Intel Wired LAN Driver Updates 2022-02-07 Dave adds support for ice driver to provide DSCP QoS mappings to irdma driver. [1] https://lore.kernel.org/netdev/20220202191921.1638-1-shiraz.saleem@intel.com/ * 'iwl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux: ice: add support for DSCP QoS for IDC ==================== Link: https://lore.kernel.org/r/20220207235921.1303522-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-08i40e: Add a stat for tracking busy rx pagesJoe Damato5-5/+15
In some cases, pages cannot be reused by i40e because the page is busy. Add a counter for this event. Busy page count is accessible via ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08i40e: Add a stat for tracking pages waivedJoe Damato5-4/+17
In some cases, pages can not be reused because they are not associated with the correct NUMA zone. Knowing how often pages are waived helps users to understand the interaction between the driver's memory usage and their system. Pass rx_stats through to i40e_can_reuse_rx_page to allow tracking when pages are waived. The page waive count is accessible via ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08i40e: Add a stat tracking new RX page allocationsJoe Damato5-1/+9
Add a counter for new page allocations in the i40e RX path. This stat is accessible with ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08i40e: Aggregate and export RX page reuse statJoe Damato3-1/+6
rx page reuse was already being tracked by the i40e driver per RX ring. Aggregate the counts and make them accessible via ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08i40e: Remove rx page reuse double countJoe Damato1-2/+0
Page reuse was being tracked from two locations: - i40e_reuse_rx_page (via 40e_clean_rx_irq), and - i40e_alloc_mapped_page Remove the double count and only count reuse from i40e_alloc_mapped_page when the page is about to be reused. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08net: stmmac: optimize locking around PTP clock readsYannick Vignon5-20/+20
Reading the PTP clock is a simple operation requiring only 3 register reads. Under a PREEMPT_RT kernel, protecting those reads by a spin_lock is counter-productive: if the 2nd task preempting the 1st has a higher prio but needs to read time as well, it will require 2 context switches, which will pretty much always be more costly than just disabling preemption for the duration of the reads. Moreover, with the code logic recently added to get_systime(), disabling preemption is not even required anymore: reads and writes just need to be protected from each other, to prevent a clock read while the clock is being updated. Improve the above situation by replacing the PTP spinlock by a rwlock, and using read_lock for PTP clock reads so simultaneous reads do not block each other. Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20220204135545.2770625-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-08net: typhoon: include <net/vxlan.h>Eric Dumazet1-0/+3
We need this to get vxlan_features_check() definition. Fixes: d2692eee05b8 ("net: typhoon: implement ndo_features_check method") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220208003502.1799728-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-08igb: refactor XDP registrationCorinna Vinschen2-10/+13
On changing the RX ring parameters igb uses a hack to avoid a warning when calling xdp_rxq_info_reg via igb_setup_rx_resources. It just clears the struct xdp_rxq_info content. Instead, change this to unregister if we're already registered. Align code to the igc code. Fixes: 9cbc948b5a20c ("igb: add XDP support") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-08igc: avoid kernel warning when changing RX ring parametersCorinna Vinschen1-0/+3
Calling ethtool changing the RX ring parameters like this: $ ethtool -G eth0 rx 1024 on igc triggers kernel warnings like this: [ 225.198467] ------------[ cut here ]------------ [ 225.198473] Missing unregister, handled but fix driver [ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168 xdp_rxq_info_reg+0x79/0xd0 [...] [ 225.198601] Call Trace: [ 225.198604] <TASK> [ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc] [ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc] [ 225.198626] ethnl_set_rings+0x18a/0x250 [ 225.198631] genl_family_rcv_msg_doit+0xca/0x110 [ 225.198637] genl_rcv_msg+0xce/0x1c0 [ 225.198640] ? rings_prepare_data+0x60/0x60 [ 225.198644] ? genl_get_cmd+0xd0/0xd0 [ 225.198647] netlink_rcv_skb+0x4e/0xf0 [ 225.198652] genl_rcv+0x24/0x40 [ 225.198655] netlink_unicast+0x20e/0x330 [ 225.198659] netlink_sendmsg+0x23f/0x480 [ 225.198663] sock_sendmsg+0x5b/0x60 [ 225.198667] __sys_sendto+0xf0/0x160 [ 225.198671] ? handle_mm_fault+0xb2/0x280 [ 225.198676] ? do_user_addr_fault+0x1eb/0x690 [ 225.198680] __x64_sys_sendto+0x20/0x30 [ 225.198683] do_syscall_64+0x38/0x90 [ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 225.198693] RIP: 0033:0x7f7ae38ac3aa igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to reset the xdp_rxq_info member before calling igc_setup_rx_resources(). This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info. Make sure to unregister the xdp_rxq_info structure first in igc_setup_rx_resources. Fixes: 73f1071c1d29 ("igc: Add support for XDP_TX action") Reported-by: Lennert Buytenhek <buytenh@arista.com> Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-07net: dsa: mv88e6xxx: Unlock on error in mv88e6xxx_port_bridge_join()Dan Carpenter1-1/+1
Call mv88e6xxx_reg_unlock(chip) before returning on this error path. Fixes: 7af4a361a62f ("net: dsa: mv88e6xxx: Improve isolation of standalone ports") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-07net: dsa: mv88e6xxx: Fix off by in one in mv88e6185_phylink_get_caps()Dan Carpenter1-1/+1
The <= ARRAY_SIZE() needs to be < ARRAY_SIZE() to prevent an out of bounds error. Fixes: d4ebf12bcec4 ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-07net: hns3: add support for TX push modeYufeng Mo8-8/+118
For the device that supports the TX push capability, the BD can be directly copied to the device memory. However, due to hardware restrictions, the push mode can be used only when there are no more than two BDs, otherwise, the doorbell mode based on device memory is used. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-07net: asix: add proper error handling of usb read errorsPavel Skripkin3-11/+33
Syzbot once again hit uninit value in asix driver. The problem still the same -- asix_read_cmd() reads less bytes, than was requested by caller. Since all read requests are performed via asix_read_cmd() let's catch usb related error there and add __must_check notation to be sure all callers actually check return value. So, this patch adds sanity check inside asix_read_cmd(), that simply checks if bytes read are not less, than was requested and adds missing error handling of asix_read_cmd() all across the driver code. Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-07r8169: factor out redundant RTL8168d PHY config functionality to ↵Heiner Kallweit1-46/+25
rtl8168d_1_common() rtl8168d_2_hw_phy_config() shares quite some functionality with rtl8168d_1_hw_phy_config(), so let's factor out the common part to a new function rtl8168d_1_common(). In addition improve the code a little. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-07mlxsw: Support FLOW_ACTION_MANGLE for SIP and DIP IPv6 addressesDanielle Ratson3-11/+103
Spectrum-2 supports an ACL action SIP_DIP, which allows IPv4 and IPv6 source and destination addresses change. Offload suitable mangles to the IPv6 address change action. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-07mlxsw: Support FLOW_ACTION_MANGLE for SIP and DIP IPv4 addressesDanielle Ratson3-0/+47
Spectrum-2 supports an ACL action SIP_DIP, which allows IPv4 and IPv6 source and destination addresses change. Offload suitable mangles to the IPv4 address change action. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-07mlxsw: core_acl_flex_actions: Add SIP_DIP_ACTIONDanielle Ratson1-0/+45
Add fields related to SIP_DIP_ACTION, which is used for changing of SIP and DIP addresses. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: typhoon: implement ndo_features_check methodEric Dumazet1-5/+16
Instead of disabling TSO at compile time if MAX_SKB_FRAGS > 32, implement ndo_features_check() method for this driver for a more dynamic handling. If skb has more than 32 frags and is a GSO packet, force software segmentation. Most locally generated packets will use a small number of fragments anyway. For forwarding workloads, we can limit gro_max_size at ingress, we might also implement gro_max_segs if needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: sundance: Replace one-element array with non-array objectGustavo A. R. Silva1-30/+30
It seems this one-element array is not actually being used as an array of variable size, so we can just replace it with just a non-array object of type struct desc_frag and refactor a bit the rest of the code. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05bnx2x: Replace one-element array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: mana: Remove unnecessary check of cqe_type in mana_process_rx_cqe()Haiyang Zhang1-3/+0
The switch statement already ensures cqe_type == CQE_RX_OKAY at that point. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: mana: Add handling of CQE_RX_TRUNCATEDHaiyang Zhang1-2/+5
The proper way to drop this kind of CQE is advancing rxq tail without indicating the packet to the upper network layer. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: dsa: realtek: don't default Kconfigs to yJakub Kicinski1-4/+0
We generally default the vendor to y and the drivers itself to n. NET_DSA_REALTEK, however, selects a whole bunch of things, so it's not a pure "vendor selection" knob. Let's default it all to n. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: sparx5: remove phylink_config.pcs_poll usageRussell King (Oracle)1-1/+0
Phylink will use PCS polling whenever phylink_config.pcs_poll or the phylink_pcs poll member is set. As this driver sets both, remove the former. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: phylink: remove phylink_set_10g_modes()Russell King (Oracle)1-11/+0
phylink_set_10g_modes() is no longer used with the conversion of drivers to phylink_generic_validate(), so we can remove it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: dsa: qca8k: check correct variable in qca8k_phy_eth_command()Dan Carpenter1-1/+1
This is a copy and paste bug. It was supposed to check "clear_skb" instead of "write_skb". Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: lan966x: Update mdb when enabling/disabling mcast_snoopingHoratiu Vultur3-0/+51
When the multicast snooping is disabled, the mdb entries should be removed from the HW, but they still need to be kept in memory for when the mcast_snooping will be enabled again. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLEDHoratiu Vultur4-1/+110
The callback allows to enable/disable multicast snooping. When the snooping is enabled, all IGMP and MLD frames are redirected to the CPU, therefore make sure not to set the skb flag 'offload_fwd_mark'. The HW will not flood multicast ipv4/ipv6 data frames. When the snooping is disabled, the HW will flood IGMP, MLD and multicast ipv4/ipv6 frames according to the mcast_flood flag. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: lan966x: Update the PGID used by IPV6 data framesHoratiu Vultur1-1/+5
When enabling the multicast snooping, the forwarding of the IPV6 frames has it's own forwarding mask. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: don't include ndisc.h from ipv6.hJakub Kicinski2-0/+2
Nothing in ipv6.h needs ndisc.h, drop it. Link: https://lore.kernel.org/r/20220203043457.2222388-1-kuba@kernel.org Acked-by: Jeremy Kerr <jk@codeconstruct.com.au> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Link: https://lore.kernel.org/r/20220203231240.2297588-1-kuba@kernel.org Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04net: ipa: determine replenish doorbell differentlyAlex Elder2-6/+10
Rather than tracking the number of receive buffer transactions that have been submitted without a doorbell, just track the total number of transactions that have been issued. Then ring the doorbell when that number modulo the replenish batch size is 0. The effect is roughly the same, but the new count is slightly more interesting, and this approach will someday allow the replenish batch size to be tuned at runtime. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-16 08:16:56 +0300