Age | Commit message (Collapse) | Author | Files | Lines |
|
No functional modification involved.
drivers/dma/owl-dma.c:208: warning: expecting prototype for struct owl_dma_pchan. Prototype was for struct owl_dma_vchan instead HDRTEST usr/include/sound/asequencer.h
Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230722153244.2086949-1-chris.zjh@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Disabling IDXD device doesn't reset Page Request Service (PRS)
disable flag to its initial value 0. This may cause user confusion
because once PRS is disabled user will see PRS still remains the
previous setting (i.e. disabled) via sysfs interface even after the
device is disabled.
To eliminate user confusion, reset PRS disable flag to ensure that
the PRS flag bit reflects correct state after the device is disabled.
Additionally, simplify the code by setting wq->flags to 0, which clears
all flag bits, including any future additions.
Fixes: f2dc327131b5 ("dmaengine: idxd: add per wq PRS disable")
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712193505.3440752-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.
Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.
Reported-by: Richard Tresidder <rtresidd@electromag.com.au>
Tested-by: Richard Tresidder <rtresidd@electromag.com.au>
Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-serial/f8a86ecd-64b1-573f-c2fa-59f541083f1a@electromag.com.au/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230526105434.14959-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When 'mcf_edma' is allocated, some space is allocated for a
flexible array at the end of the struct. 'chans' item are allocated, that is
to say 'pdata->dma_channels'.
Then, this number of item is stored in 'mcf_edma->n_chans'.
A few lines later, if 'mcf_edma->n_chans' is 0, then a default value of 64
is set.
This ends to no space allocated by devm_kzalloc() because chans was 0, but
64 items are read and/or written in some not allocated memory.
Change the logic to define a default value before allocating the memory.
Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f55d914407c900828f6fad3ea5fa791a5f17b9a4.1685172449.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
ionic_start_queues_reconfig returns an error code if txrx_init fails.
Handle this error code in the relevant places.
This fixes a corner case where the device could get left in a detached
state if the CMB reconfig fails and the attempt to clean up the mess
also fails. Note that calling netif_device_attach when the netdev is
already attached does not lead to unexpected behavior.
Change goto name "errout" to "err_out" to maintain consistency across
goto statements.
Fixes: 40bc471dc714 ("ionic: add tx/rx-push support with device Component Memory Buffers")
Fixes: 6f7d6f0fd7a3 ("ionic: pull reset_queues into tx_timeout handler")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.
Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Skip status check for both pfe1100 and pfe3000 because the communication
error is also observed on pfe1100 devices.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Fixes: 626bb2f3fb3c hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230804221403.28931-1-rentao.bupt@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
syzbot/KCSAN reported data-races in macsec whenever dev->stats fields
are updated.
It appears all of these updates can happen from multiple cpus.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Prevent the scsi disk driver from issuing a START STOP UNIT command
for ATA devices during system resume as this causes various issues
reported by multiple users.
* tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata,scsi: do not issue START STOP UNIT on resume
|
|
Commit af8b04c63708 ("zram: simplify bvec iteration in
__zram_make_request") changed the bio iteration in zram to rely on the
implicit capping to page boundaries in bio_for_each_segment. But it
failed to care for the fact zram not only care about the page alignment
of the bio payload, but also the page alignment into the device. For
buffered I/O and swap those are the same, but for direct I/O or kernel
internal I/O like XFS log buffer writes they can differ.
Fix this by open coding bio_for_each_segment and limiting the bvec len
so that it never crosses over a page alignment boundary in the device
in addition to the payload boundary already taken care of by
bio_iter_iovec.
Cc: stable@vger.kernel.org
Fixes: af8b04c63708 ("zram: simplify bvec iteration in __zram_make_request")
Reported-by: Dusty Mabe <dusty@dustymabe.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/20230805055537.147835-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- early fixmap preallocation to fix boot failures on kernel >= 6.4
- remove DMA leftover code in parport_gsc
- drop old comments and code style fixes
* tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: unaligned: Add required spaces after ','
parport: gsc: remove DMA leftover code
parisc: pci-dma: remove unused and dead EISA code and comment
parisc/mm: preallocate fixmap page tables at init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v6.5-rc
This contains a fix for a potential issue on some Qualcomm SoCs where
bit-masks should have been used to configure the Bus Clock Manager
hardware, instead of bandwidth units.
- interconnect: qcom: Add support for mask-based BCMs
- interconnect: qcom: sm8450: add enable_mask for bcm nodes
- interconnect: qcom: sm8550: add enable_mask for bcm nodes
- interconnect: qcom: sa8775p: add enable_mask for bcm nodes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sa8775p: add enable_mask for bcm nodes
interconnect: qcom: sm8550: add enable_mask for bcm nodes
interconnect: qcom: sm8450: add enable_mask for bcm nodes
interconnect: qcom: Add support for mask-based BCMs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for some SoC clk drivers:
- Change a usleep() to udelay() to avoid scheduling while atomic in
the Amlogic PLL code
- Revert a patch to the Mediatek MT8183 driver that caused an
out-of-bounds write
- Return the right error value when devm_of_iomap() fails in
imx93_clocks_probe()
- Constrain the Kconfig for the fixed mmio clk so that it depends on
HAS_IOMEM and can't be compiled on architectures such as s390"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM
clk: imx93: Propagate correct error in imx93_clocks_probe()
clk: mediatek: mt8183: Add back SSPM related clocks
clk: meson: change usleep_range() to udelay() for atomic context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix a bug in a python script for Hyper-V (Ani Sinha)
- Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley)
- Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh
Sengar)
- Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing,
ZhiHu)
* tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer()
x86/hyperv: add noop functions to x86_init mpparse functions
vmbus_testing: fix wrong python syntax for integer value comparison
x86/hyperv: fix a warning in mshyperv.h
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg
Drivers: hv: Change hv_free_hyperv_page() to take void * argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a sparse warning triggered by the TPMI interface recently added to
the Intel RAPL power capping driver (Zhang Rui)"
* tag 'pm-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix a sparse warning in TPMI interface
|
|
driver remove
When the tagging protocol in current use is "ocelot-8021q" and we unbind
the driver, we see this splat:
$ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind
mscc_felix 0000:00:00.5 swp0: left promiscuous mode
sja1105 spi2.0: Link is Down
DSA: tree 1 torn down
mscc_felix 0000:00:00.5 swp2: left promiscuous mode
sja1105 spi2.2: Link is Down
DSA: tree 3 torn down
fsl_enetc 0000:00:00.2 eno2: left promiscuous mode
mscc_felix 0000:00:00.5: Link is Down
------------[ cut here ]------------
RTNL: assertion failed at net/dsa/tag_8021q.c (409)
WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0
Modules linked in:
CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771
pc : dsa_tag_8021q_unregister+0x12c/0x1a0
lr : dsa_tag_8021q_unregister+0x12c/0x1a0
Call trace:
dsa_tag_8021q_unregister+0x12c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
RTNL: assertion failed at net/8021q/vlan_core.c (376)
WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0
CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771
pc : vlan_vid_del+0x1b8/0x1f0
lr : vlan_vid_del+0x1b8/0x1f0
dsa_tag_8021q_unregister+0x8c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
DSA: tree 0 torn down
This was somewhat not so easy to spot, because "ocelot-8021q" is not the
default tagging protocol, and thus, not everyone who tests the unbinding
path may have switched to it beforehand. The default
felix_tag_npi_teardown() does not require rtnl_lock() to be held.
Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
b3574f579ece ("PCI: mvebu: Mark driver as BROKEN") made it impossible to
enable the pci-mvebu driver. The driver does have known problems, but as
Russell and Uwe reported, it does work in some configurations, so removing
it broke some working setups.
Revert b3574f579ece so pci-mvebu is available.
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/ZMzicVQEyHyZzBOc@shell.armlinux.org.uk
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230804134622.pmbymxtzxj2yfhri@pengutronix.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Raw NAND fixes:
- fsl_upm: Fix an off-by one test in fun_exec_op()
- Rockchip:
- Align hwecc vs. raw page helper layouts
- Fix oobfree offset and description
- Meson: Fix OOB available bytes for ECC
- Omap ELM: Fix incorrect type in assignment
SPI-NOR fix:
- Avoid holes in struct spi_mem_op
Hyperbus fix:
- Add Tudor as reviewer in MAINTAINERS
SPI-NAND fixes:
- Winbond and Toshiba: Fix ecc_get_status"
* tag 'mtd/fixes-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op()
mtd: spi-nor: avoid holes in struct spi_mem_op
MAINTAINERS: Add myself as reviewer for HYPERBUS
mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts
mtd: rawnand: rockchip: fix oobfree offset and description
mtd: rawnand: meson: fix OOB available bytes for ECC
mtd: rawnand: omap_elm: Fix incorrect type in assignment
mtd: spinand: winbond: Fix ecc_get_status
mtd: spinand: toshiba: Fix ecc_get_status
|
|
Pull drm fixes from Dave Airlie:
"Small set of fixes this week, i915 and a few misc ones. I didn't see
an amd pull so maybe next week it'll have a few more on that driver.
ttm:
- NULL ptr deref fix
panel:
- add missing MODULE_DEVICE_TABLE
imx/ipuv3:
- timing fix
i915:
- Fix bug in getting msg length in AUX CH registers handler
- Gen12 AUX invalidation fixes
- Fix premature release of request's reusable memory"
* tag 'drm-fixes-2023-08-04' of git://anongit.freedesktop.org/drm/drm:
drm/panel: samsung-s6d7aa0: Add MODULE_DEVICE_TABLE
drm/i915: Fix premature release of request's reusable memory
drm/i915/gt: Support aux invalidation on all engines
drm/i915/gt: Poll aux invalidation register bit on invalidation
drm/i915/gt: Enable the CCS_FLUSH bit in the pipe control and in the CS
drm/i915/gt: Rename flags with bit_group_X according to the datasheet
drm/i915/gt: Ensure memory quiesced before invalidation
drm/i915: Add the gen12_needs_ccs_aux_inv helper
drm/i915/gt: Cleanup aux invalidation registers
drm/i915/gvt: Fix bug in getting msg length in AUX CH registers handler
drm/imx/ipuv3: Fix front porch adjustment upon hactive aligning
drm/ttm: check null pointer before accessing when swapping
|
|
Provide the driver indirection iterating over all DRM GPU VA spaces to
enable the common 'gpuvas' debugfs file for dumping DRM GPU VA spaces.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-13-dakr@redhat.com
|
|
This commit provides the implementation for the new uapi motivated by the
Vulkan API. It allows user mode drivers (UMDs) to:
1) Initialize a GPU virtual address (VA) space via the new
DRM_IOCTL_NOUVEAU_VM_INIT ioctl for UMDs to specify the portion of VA
space managed by the kernel and userspace, respectively.
2) Allocate and free a VA space region as well as bind and unbind memory
to the GPUs VA space via the new DRM_IOCTL_NOUVEAU_VM_BIND ioctl.
UMDs can request the named operations to be processed either
synchronously or asynchronously. It supports DRM syncobjs
(incl. timelines) as synchronization mechanism. The management of the
GPU VA mappings is implemented with the DRM GPU VA manager.
3) Execute push buffers with the new DRM_IOCTL_NOUVEAU_EXEC ioctl. The
execution happens asynchronously. It supports DRM syncobj (incl.
timelines) as synchronization mechanism. DRM GEM object locking is
handled with drm_exec.
Both, DRM_IOCTL_NOUVEAU_VM_BIND and DRM_IOCTL_NOUVEAU_EXEC, use the DRM
GPU scheduler for the asynchronous paths.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-12-dakr@redhat.com
|
|
The new VM_BIND UAPI uses the DRM GPU VA manager to manage the VA space.
Hence, we a need a way to manipulate the MMUs page tables without going
through the internal range allocator implemented by nvkm/vmm.
This patch adds a raw interface for nvkm/vmm to pass the resposibility
for managing the address space and the corresponding map/unmap/sparse
operations to the upper layers.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-11-dakr@redhat.com
|
|
The new VM_BIND UAPI implementation introduced in subsequent commits
will allow asynchronous jobs processing push buffers and emitting fences.
If a job times out, we need a way to recover from this situation. For
now, simply kill the channel to unblock all hung up jobs and signal
userspace that the device is dead on the next EXEC or VM_BIND ioctl.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-10-dakr@redhat.com
|
|
The new VM_BIND UAPI implementation introduced in subsequent commits
will allow asynchronous jobs processing push buffers and emitting
fences.
If a fence context is killed, e.g. due to a channel fault, jobs which
are already queued for execution might still emit new fences. In such a
case a job would hang forever.
To fix that, fail to emit a new fence on a killed fence context with
-ENODEV to unblock the job.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-9-dakr@redhat.com
|
|
The new (VM_BIND) UAPI exports DMA fences through DRM syncobjs. Hence,
in order to emit fences within DMA fence signalling critical sections
(e.g. as typically done in the DRM GPU schedulers run_job() callback) we
need to separate fence allocation and fence emitting.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-8-dakr@redhat.com
|
|
Move the usercopy helpers to a common driver header file to make it
usable for the new API added in subsequent commits.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-7-dakr@redhat.com
|
|
Initialize the GEM's DRM GPU VA manager interface in preparation for the
(u)vmm implementation, provided by subsequent commits, to make use of it.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-6-dakr@redhat.com
|
|
Provide a getter function for the client's current vmm context. Since
we'll add a new (u)vmm context for UMD bindings in subsequent commits,
this will keep the code clean.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-5-dakr@redhat.com
|
|
nouveau > 10 years ago had a plan for new multiplexer inside a multiplexer
API using nvif. It never fully reached fruition, fast forward 10 years,
and the new vulkan driver is avoiding libdrm and calling ioctls, and
these 3 ioctls, getparam, channel alloc + free don't seem to be things
we'd want to use nvif for.
Undeprecate and put them into the uapi header so we can just copy it
into mesa later.
v2: use uapi types.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-3-dakr@redhat.com
|
|
Pull ceph fixes from Ilya Dryomov:
"Two patches to improve RBD exclusive lock interaction with
osd_request_timeout option and another fix to reduce the potential for
erroneous blocklisting -- this time in CephFS. All going to stable"
* tag 'ceph-for-6.5-rc5' of https://github.com/ceph/ceph-client:
libceph: fix potential hang in ceph_osdc_notify()
rbd: prevent busy loop when requesting exclusive lock
ceph: defer stopping mdsc delayed_work
|
|
The commit c242f48433e7 ("drm: Make FB_CORE to be selected if DRM fbdev
emulation is enabled") changed DRM_FBDEV_EMULATION from 'depends on FB'
to an effective 'select FB_CORE', so any config that previously had DRM=y
and FB=n now has FB_CORE=y and FRAMEBUFFER_CONSOLE=y.
This leads to unmet direct dependencies detected for FRAMEBUFFER_CONSOLE
as reported by Arthur Grillo, e.g:
WARNING: unmet direct dependencies detected for FRAMEBUFFER_CONSOLE
Depends on [n]: VT [=n] && FB_CORE [=y] && !UML [=y]
Selected by [y]:
- DRM_FBDEV_EMULATION [=y] && HAS_IOMEM [=y] && DRM [=y] && !EXPERT [=n]
Arnd Bergmann suggests to drop the select FRAMEBUFFER_CONSOLE for the
DRM_FBDEV_EMULATION Kconfig symbol, since a possible use case could
be to enable DRM fbdev emulation but without a framebuffer console.
Fixes: c242f48433e7 ("drm: Make FB_CORE to be selected if DRM fbdev emulation is enabled")
Reported-by: Arthur Grillo <arthurgrillo@riseup.net>
Closes: https://lore.kernel.org/dri-devel/20230726220325.278976-1-arthurgrillo@riseup.net
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804125156.1387542-1-javierm@redhat.com
|
|
Since commit 1e7ac595fa46 ("drm/msm/dpu: pass irq to
dpu_encoder_helper_wait_for_irq()") the
dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather
than the IRQ index in phys_enc->intr table, however writeback got the
older invocation in place. This was unnoticed for several releases, but
now it's time to fix it.
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550924/
Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org
|
|
Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().
Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm().
Fixes: 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When removing the core perf tune overrides, I also occasionaly removed the
initialisation of the clk_rate variable. Initialise it to 0 to let max()
correctly calculate the maximum of requested clock rates.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 6a4bc73915af ("drm/msm/dpu: drop separate dpu_core_perf_tune overrides")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551321/
Link: https://lore.kernel.org/r/20230804094804.36053-1-dmitry.baryshkov@linaro.org
|
|
Commit 3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT
declares an explicit panel type") started using -1 as the value for
unset panel_type. It gets initialized in intel_panel_init_alloc(), but
the SDVO code never calls it.
Call intel_panel_init_alloc() to initialize the panel, including the
panel_type.
Reported-by: Tomi Leppänen <tomi@tomin.site>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896
Fixes: 3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Tomi Leppänen <tomi@tomin.site>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803122706.838721-1-jani.nikula@intel.com
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Michal Simek <michal.simek@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-47-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-46-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-45-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Michal Januszewski <spock@gentoo.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-44-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-43-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-42-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-41-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-40-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-39-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Jingoo Han <jingoohan1@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-38-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-37-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-36-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-35-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
* fix driver name in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-34-tzimmermann@suse.de
|
|
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-33-tzimmermann@suse.de
|