summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-04-06drbd: Fix five use after free bugs in get_initial_stateLv Yunlong4-33/+42
In get_initial_state, it calls notify_initial_state_done(skb,..) if cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(), the skb will be freed by nlmsg_free(skb). Then get_initial_state will goto out and the freed skb will be used by return value skb->len, which is a uaf bug. What's worse, the same problem goes even further: skb can also be freed in the notify_*_state_change -> notify_*_state calls below. Thus 4 additional uaf bugs happened. My patch lets the problem callee functions: notify_initial_state_done and notify_*_state_change return an error code if errors happen. So that the error codes could be propagated and the uaf bugs can be avoid. v2 reports a compilation warning. This v3 fixed this warning and built successfully in my local environment with no additional warnings. v2: https://lore.kernel.org/patchwork/patch/1435218/ Fixes: a29728463b254 ("drbd: Backport the "events2" command") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06drm/amdgpu/smu10: fix SoC/fclk units in auto modeAlex Deucher1-4/+4
SMU takes clock limits in Mhz units. socclk and fclk were using 10 khz units in some cases. Switch to Mhz units. Fixes higher than required SoC clocks. Fixes: 97cf32996c46d9 ("drm/amd/pm: Removed fixed clock in auto mode DPM") Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-06drm/amd/display: update dcn315 clock table readDmytro Laktyushkin1-40/+67
[Why & How] Make dcn315 base its clock table off dcfclk rather than fclk. This change also adds some sanity checking to make sure an empty pmfw table does not result in invalid dal clocks. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amdgpu/display: change pipe policy for DCN 2.1Benjamin Marty1-1/+1
Fixes crash on MST Hub disconnect. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849 Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split") Signed-off-by: Benjamin Marty <info@benjaminmarty.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-06drm/amd/display: Add configuration options for AUX wake work around.Jimmy Kizito2-1/+24
[Why] Work around to try to wake unresponsive DP sinks may need to be adjusted for certain sinks. [How] Add options to disable work around or adjust time spent trying to wake unresponsive DPRX. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/display: remove assert for odm transition caseEric Bernstein1-1/+0
Remove assert that will hit during odm transition case, since this is a valid case. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amdgpu: don't use BACO for reset in S3Alex Deucher1-0/+11
Seems to cause a reboots or hangs on some systems. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1924 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1953 Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-06drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bwCHANDAN VURDIGERE NATARAJ1-0/+2
[Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-06drm/amdkfd: Create file descriptor after client is added to smi_clients listLee Jones1-9/+15
This ensures userspace cannot prematurely clean-up the client before it is fully initialised which has been proven to cause issues in the past. Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-06drm/amdgpu: Sync up header and implementation to use the same parameter namesMa Jun1-2/+2
Sync up header and implementation to use the same parameter names in function amdgpu_ring_init. ring_size -> max_dw, prio -> hw_prio Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amdgpu: fix incorrect GCR_GENERAL_CNTL addressRuili Ji1-3/+3
gfx10.3.3/gfx10.3.6/gfx10.3.7 shall use 0x1580 address for GCR_GENERAL_CNTL Acked-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Ruili Ji <ruiliji2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-06amd/display: set backlight only if requiredShirish S2-3/+10
[Why] comparing pwm bl values (coverted) with user brightness(converted) levels in commit_tail leads to continuous setting of backlight via dmub as they don't to match. This leads overdrive in queuing of commands to DMCU that sometimes lead to depending on load on DMCU fw: "[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3" [How] Store last successfully set backlight value and compare with it instead of pwm reads which is not what we should compare with. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-06drm/amd/display: Fix allocate_mst_payload assert on resumeRoman Li1-1/+2
[Why] On resume we do link detection for all non-MST connectors. MST is handled separately. However the condition for telling if connector is on mst branch is not enough for mst hub case. Link detection for mst branch link leads to mst topology reset. That causes assert in dc_link_allocate_mst_payload() [How] Use link type as indicator for mst link. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/display: Revert FEC check in validationMartin Leung1-4/+0
why and how: causes failure on install on certain machines Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/display: Add work around for AUX failure on wake.Jimmy Kizito2-0/+60
[Why] When waking from low-power states, a DP sink may remain unresponsive to AUX transactions. [How] Try to toggle DPCD SET_POWER register repeatedly (up to a maximum timeout value) until DP sink becomes responsive. Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/display: Clear optc false state when disable otgCharlene Liu2-8/+11
[why] when disable optc, need to clear the underflow status as well. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/display: Enable power gating before init_pipesRoman Li3-6/+9
[Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/display: Remove redundant dsc power gating from init_hwRoman Li1-7/+0
[Why] DSC Power down code has been moved from dcn31_init_hw into init_pipes() Need to remove it from dcn10_init_hw() as well to avoid duplicated action on dcn1.x/2.x [How] Remove DSC power down code from dcn10_init_hw() Fixes: 8fa6f4c5715c ("drm/amd/display: fixed the DSC power off sequence during Driver PnP") Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/display: Correct Slice reset calculationChris Park1-2/+2
[Why] Once DSC slice cannot fit pixel clock, we incorrectly reset min slices to 0 and allow max slice to operate, even when max slice itself cannot fit the pixel clock properly. [How] Change the sequence such that we correctly determine DSC is not possible when both min slices and max slices cannot fit pixel clock per slice. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chris Park <Chris.Park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amd/vcn: fix an error msg on vcn 3.0tiancyin1-1/+1
Some video card has more than one vcn instance, passing 0 to vcn_v3_0_pause_dpg_mode is incorrect. Error msg: Register(1) [mmUVD_POWER_STATUS] failed to reach value 0x00000001 != 0x00000002 Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: tiancyin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-06drm/amdgpu/vcn3: send smu interface typeBoyuan Zhang2-0/+12
For VCN FW to detect ASIC type, in order to use different mailbox registers. V2: simplify codes and fix format issue. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()Kamal Dasu1-2/+2
This fixes case where MSPI controller is used to access spi-nor flash and BSPI block is not present. Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220328142442.7553-1-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-06spi: cadence-quadspi: fix protocol setup for non-1-1-X operationsMatthias Schiffer1-34/+12
cqspi_set_protocol() only set the data width, but ignored the command and address width (except for 8-8-8 DTR ops), leading to corruption of all transfers using 1-X-X or X-X-X ops. Fix by setting the other two widths as well. While we're at it, simplify the code a bit by replacing the CQSPI_INST_TYPE_* constants with ilog2(). Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash with 1-4-4 read and write operations. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20220331110819.133392-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-06spi: core: add dma_map_dev for __spi_unmap_msg()Vinod Koul1-0/+4
Commit b470e10eb43f ("spi: core: add dma_map_dev for dma device") added dma_map_dev for _spi_map_msg() but missed to add for unmap routine, __spi_unmap_msg(), so add it now. Fixes: b470e10eb43f ("spi: core: add dma_map_dev for dma device") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220406132238.1029249-1-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-06cdrom: remove unused variableEnze Li1-2/+1
The clang static analyzer reports the following warning, File: drivers/cdrom/cdrom.c Warning: line 1380, column 7 Although the value stored to 'status' is used in enclosing expression, the value is never actually read from 'status' Remove the unused variable to eliminate the warning. Signed-off-by: Enze Li <lienze@kylinos.cn> Link: https://lore.kernel.org/all/20220401032623.293666-1-lienze@kylinos.cn Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20220401211842.2088096-1-phil@philpotter.co.uk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-06myri10ge: fix an incorrect free for skb in myri10ge_sw_tsoXiaomeng Tong1-4/+2
All remaining skbs should be released when myri10ge_xmit fails to transmit a packet. Fix it within another skb_list_walk_safe. Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: usb: aqc111: Fix out-of-bounds accesses in RX fixupMarcin Kozlowski1-2/+7
aqc111_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. Found doing variant analysis. Tested it with another driver (ax88179_178a), since I don't have a aqc111 device to test it, but the code looks very similar. Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06qede: confirm skb is allocated before usingJamie Bainbridge1-0/+3
qede_build_skb() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. This results in a kernel panic because the skb to reserve is NULL. Add a check in case build_skb() failed to allocate and return NULL. The NULL return is handled correctly in callers to qede_build_skb(). Fixes: 8a8633978b842 ("qede: Add build_skb() support.") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06Merge branch '100GbE' of ↵David S. Miller3-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-05 Maciej Fijalkowski says: We were solving issues around AF_XDP busy poll's not-so-usual scenarios, such as very big busy poll budgets applied to very small HW rings. This set carries the things that were found during that work that apply to net tree. One thing that was fixed for all in-tree ZC drivers was missing on ice side all the time - it's about syncing RCU before destroying XDP resources. Next one fixes the bit that is checked in ice_xsk_wakeup and third one avoids false setting of DD bits on Tx descriptors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06Drivers: hv: vmbus: Replace smp_store_mb() with virt_store_mb()Andrea Parri (Microsoft)1-3/+3
Following the recommendation in Documentation/memory-barriers.txt for virtual machine guests. Fixes: 8b6a877c060ed ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels") Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20220328154457.100872-1-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-04-06Drivers: hv: balloon: Disable balloon and hot-add accordinglyBoqun Feng1-2/+34
Currently there are known potential issues for balloon and hot-add on ARM64: * Unballoon requests from Hyper-V should only unballoon ranges that are guest page size aligned, otherwise guests cannot handle because it's impossible to partially free a page. This is a problem when guest page size > 4096 bytes. * Memory hot-add requests from Hyper-V should provide the NUMA node id of the added ranges or ARM64 should have a functional memory_add_physaddr_to_nid(), otherwise the node id is missing for add_memory(). These issues require discussions on design and implementation. In the meanwhile, post_status() is working and essential to guest monitoring. Therefore instead of disabling the entire hv_balloon driver, the ballooning (when page size > 4096 bytes) and hot-add are disabled accordingly for now. Once the issues are fixed, they can be re-enable in these cases. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220325023212.1570049-3-boqun.feng@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-04-06Drivers: hv: balloon: Support status report for larger page sizesBoqun Feng1-3/+10
DM_STATUS_REPORT expects the numbers of pages in the unit of 4k pages (HV_HYP_PAGE) instead of guest pages, so to make it work when guest page sizes are larger than 4k, convert the numbers of guest pages into the numbers of HV_HYP_PAGEs. Note that the numbers of guest pages are still used for tracing because tracing is internal to the guest kernel. Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220325023212.1570049-2-boqun.feng@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-04-06random: check for signal_pending() outside of need_resched() checkJann Horn1-2/+2
signal_pending() checks TIF_NOTIFY_SIGNAL and TIF_SIGPENDING, which signal that the task should bail out of the syscall when possible. This is a separate concept from need_resched(), which checks TIF_NEED_RESCHED, signaling that the task should preempt. In particular, with the current code, the signal_pending() bailout probably won't work reliably. Change this to look like other functions that read lots of data, such as read_zero(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-04-06random: do not allow user to keep crng key around on stackJason A. Donenfeld1-12/+23
The fast key erasure RNG design relies on the key that's used to be used and then discarded. We do this, making judicious use of memzero_explicit(). However, reads to /dev/urandom and calls to getrandom() involve a copy_to_user(), and userspace can use FUSE or userfaultfd, or make a massive call, dynamically remap memory addresses as it goes, and set the process priority to idle, in order to keep a kernel stack alive indefinitely. By probing /proc/sys/kernel/random/entropy_avail to learn when the crng key is refreshed, a malicious userspace could mount this attack every 5 minutes thereafter, breaking the crng's forward secrecy. In order to fix this, we just overwrite the stack's key with the first 32 bytes of the "free" fast key erasure output. If we're returning <= 32 bytes to the user, then we can still return those bytes directly, so that short reads don't become slower. And for long reads, the difference is hopefully lost in the amortization, so it doesn't change much, with that amortization helping variously for medium reads. We don't need to do this for get_random_bytes() and the various kernel-space callers, and later, if we ever switch to always batching, this won't be necessary either, so there's no need to change the API of these functions. Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jann Horn <jannh@google.com> Fixes: c92e040d575a ("random: add backtracking protection to the CRNG") Fixes: 186873c549df ("random: use simpler fast key erasure flow on per-cpu keys") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-04-06net: phy: mscc-miim: reject clause 45 register accessesMichael Walle1-0/+6
The driver doesn't support clause 45 register access yet, but doesn't check if the access is a c45 one either. This leads to spurious register reads and writes. Add the check. Fixes: 542671fe4d86 ("net: phy: mscc-miim: Add MDIO driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: axiemac: use a phandle to reference pcs_phyAndy Chiu1-2/+9
In some SGMII use cases where both a fixed link external PHY and the internal PCS/PMA PHY need to be configured, we should explicitly use a phandle "pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the driver would use "phy-handle" in the DT as the reference to both the external and the internal PCS/PMA PHY. In other cases where the core is connected to a SFP cage, we could still point phy-handle to the intenal PCS/PMA PHY, and let the driver connect to the SFP module, if exist, via phylink. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: axienet: factor out phy_node in struct axienet_localAndy Chiu2-10/+5
the struct member `phy_node` of struct axienet_local is not used by the driver anymore after initialization. It might be a remnent of old code and could be removed. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: axienet: setup mdio unconditionallyAndy Chiu1-7/+6
The call to axienet_mdio_setup should not depend on whether "phy-node" pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in SGMII or 100Base-X modes, move it into the if statement. And the next patch will remove `lp->phy_node` from driver's private structure and do an of_node_put on it right away after use since it is not used elsewhere. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: sfc: fix using uninitialized xdp tx_queueTaehee Yoo3-1/+6
In some cases, xdp tx_queue can get used before initialization. 1. interface up/down 2. ring buffer size change When CPU cores are lower than maximum number of channels of sfc driver, it creates new channels only for XDP. When an interface is up or ring buffer size is changed, all channels are initialized. But xdp channels are always initialized later. So, the below scenario is possible. Packets are received to rx queue of normal channels and it is acted XDP_TX and tx_queue of xdp channels get used. But these tx_queues are not initialized yet. If so, TX DMA or queue error occurs. In order to avoid this problem. 1. initializes xdp tx_queues earlier than other rx_queue in efx_start_channels(). 2. checks whether tx_queue is initialized or not in efx_xdp_tx_buffers(). Splat looks like: sfc 0000:08:00.1 enp8s0f1np1: TX queue 10 spurious TX completion id 250 sfc 0000:08:00.1 enp8s0f1np1: resetting (RECOVER_OR_ALL) sfc 0000:08:00.1 enp8s0f1np1: MC command 0x80 inlen 100 failed rc=-22 (raw=22) arg=789 sfc 0000:08:00.1 enp8s0f1np1: has been disabled Fixes: f28100cb9c96 ("sfc: fix lack of XDP TX queues - error XDP TX failed (-22)") Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item backMario Limonciello3-4/+6
CONFIG_SATA_LPM_MOBILE_POLICY was renamed to CONFIG_SATA_LPM_POLICY in commit 4dd4d3deb502 ("ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item"). This can potentially cause problems as users would invisibly lose configuration policy defaults when they built the new kernel. To avoid such problems, switch back to the old name (even if it's wrong). Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-06net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()Andrew Lunn1-1/+1
There is often not a MAC address available in an EEPROM accessible by Linux with Marvell devices. Instead the bootload has the MAC address and directly programs it into the hardware. So don't consider an error from of_get_mac_address() has fatal. However, the check was added for the case where there is a MAC address in an the EEPROM, but the EEPROM has not probed yet, and -EPROBE_DEFER is returned. In that case the error should be returned. So make the check specific to this error code. Cc: Mauri Sandberg <maukka@ext.kapsi.fi> Reported-by: Thomas Walther <walther-it@gmx.de> Fixes: 42404d8f1c01 ("net: mv643xx_eth: process retval from of_get_mac_address") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220405000404.3374734-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06net: micrel: Fix KS8851 KconfigHoratiu Vultur1-0/+1
KS8851 selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851 also depend on PTP_1588_CLOCK_OPTIONAL. Fixes kconfig warning and build errors: WARNING: unmet direct dependencies detected for MICREL_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - KS8851 [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && SPI [=y] ld.lld: error: undefined symbol: ptp_clock_register referenced by micrel.c net/phy/micrel.o:(lan8814_probe) in archive drivers/built-in.a ld.lld: error: undefined symbol: ptp_clock_index referenced by micrel.c net/phy/micrel.o:(lan8814_ts_info) in archive drivers/built-in.a Reported-by: kernel test robot <lkp@intel.com> Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220405065936.4105272-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-05ACPI: bus: Eliminate acpi_bus_get_device()Rafael J. Wysocki2-14/+2
Replace the last instance of acpi_bus_get_device(), added recently by commit 87e59b36e5e2 ("spi: Support selection of the index of the ACPI Spi Resource before alloc"), with acpi_fetch_acpi_dev() and finally drop acpi_bus_get_device() that has no more users. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org>
2022-04-05Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2-24/+43
Pull virtio fixes from Michael Tsirkin: "Fixes and cleanups: - A couple of mlx5 fixes related to cvq - A couple of reverts dropping useless code (code that used it got reverted earlier)" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa: mlx5: synchronize driver status with CVQ vdpa: mlx5: prevent cvq work from hogging CPU Revert "virtio_config: introduce a new .enable_cbs method" Revert "virtio: use virtio_device_ready() in virtio_device_restore()"
2022-04-05ice: clear cmd_type_offset_bsz for TX ringsMaciej Fijalkowski1-1/+1
Currently when XDP rings are created, each descriptor gets its DD bit set, which turns out to be the wrong approach as it can lead to a situation where more descriptors get cleaned than it was supposed to, e.g. when AF_XDP busy poll is run with a large batch size. In this situation, the driver would request for more buffers than it is able to handle. Fix this by not setting the DD bits in ice_xdp_alloc_setup_rings(). They should be initialized to zero instead. Fixes: 9610bd988df9 ("ice: optimize XDP_TX workloads") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-05ice: xsk: fix VSI state check in ice_xsk_wakeup()Maciej Fijalkowski1-1/+1
ICE_DOWN is dedicated for pf->state. Check for ICE_VSI_DOWN being set on vsi->state in ice_xsk_wakeup(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-05ice: synchronize_rcu() when terminating ringsMaciej Fijalkowski3-3/+7
Unfortunately, the ice driver doesn't respect the RCU critical section that XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to paths that destroy resources that might be in use. This was addressed in other AF_XDP ZC enabled drivers, for reference see for example commit b3873a5be757 ("net/i40e: Fix concurrency issues between config flow and XSK") Fixes: efc2214b6047 ("ice: Add support for XDP") Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-05irqchip/gic, gic-v3: Prevent GSI to SGI translationsAndre Przywara2-0/+12
At the moment the GIC IRQ domain translation routine happily converts ACPI table GSI numbers below 16 to GIC SGIs (Software Generated Interrupts aka IPIs). On the Devicetree side we explicitly forbid this translation, actually the function will never return HWIRQs below 16 when using a DT based domain translation. We expect SGIs to be handled in the first part of the function, and any further occurrence should be treated as a firmware bug, so add a check and print to report this explicitly and avoid lengthy debug sessions. Fixes: 64b499d8df40 ("irqchip/gic-v3: Configure SGIs as standard interrupts") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220404110842.2882446-1-andre.przywara@arm.com
2022-04-05irqchip/gic-v3: Fix GICR_CTLR.RWP pollingMarc Zyngier1-4/+4
It turns out that our polling of RWP is totally wrong when checking for it in the redistributors, as we test the *distributor* bit index, whereas it is a different bit number in the RDs... Oopsie boo. This is embarassing. Not only because it is wrong, but also because it took *8 years* to notice the blunder... Just fix the damn thing. Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20220315165034.794482-2-maz@kernel.org
2022-04-05irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before deschedulingMarc Zyngier1-9/+19
The way KVM drives GICv4.{0,1} is as follows: - vcpu_load() makes the VPE resident, instructing the RD to start scanning for interrupts - just before entering the guest, we check that the RD has finished scanning and that we can start running the vcpu - on preemption, we deschedule the VPE by making it invalid on the RD However, we are preemptible between the first two steps. If it so happens *and* that the RD was still scanning, we nonetheless write to the GICR_VPENDBASER register while Dirty is set, and bad things happen (we're in UNPRED land). This affects both the 4.0 and 4.1 implementations. Make sure Dirty is cleared before performing the deschedule, meaning that its_clear_vpend_valid() becomes a sort of full VPE residency barrier. Reported-by: Jingyi Wang <wangjingyi11@huawei.com> Tested-by: Nianyao Tang <tangnianyao@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: 57e3cebd022f ("KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty bit") Link: https://lore.kernel.org/r/4aae10ba-b39a-5f84-754b-69c2eb0a2c03@huawei.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 18:36:34 +0300