summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-02-25spi: mediatek: Enable irq when pdata is readyRicardo Ribalda1-5/+7
[ Upstream commit c6f7874687f7027d7c4b2f53ff6e4d22850f915d ] If the device does not come straight from reset, we might receive an IRQ before we are ready to handle it. Fixes: [ 0.832328] Unable to handle kernel read from unreadable memory at virtual address 0000000000000010 [ 1.040343] Call trace: [ 1.040347] mtk_spi_can_dma+0xc/0x40 ... [ 1.262265] start_kernel+0x338/0x42c Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221128-spi-mt65xx-v1-0-509266830665@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus resetJie Zhan1-3/+5
[ Upstream commit 3c2673a09cf1181318c07b7dbc1bc532ba3d33e3 ] SATA devices on an expander may be removed and not be found again when I_T nexus reset and revalidation are processed simultaneously. The issue comes from: - Revalidation can remove SATA devices in link reset, e.g. in hisi_sas_clear_nexus_ha(). - However, hisi_sas_debug_I_T_nexus_reset() polls the state of a SATA device on an expander after sending link_reset, where it calls: hisi_sas_debug_I_T_nexus_reset sas_ata_wait_after_reset ata_wait_after_reset ata_wait_ready smp_ata_check_ready sas_ex_phy_discover sas_ex_phy_discover_helper sas_set_ex_phy The ex_phy's change count is updated in sas_set_ex_phy(), so SATA devices after a link reset may not be found later through revalidation. A similar issue was reported in: commit 0f3fce5cc77e ("[SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready") commit 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling"). To address this issue, in hisi_sas_debug_I_T_nexus_reset(), we now call smp_ata_check_ready_type() that only polls the device type while not updating the ex_phy's data of libsas. Fixes: 71453bd9d1bf ("scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset") Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-5-zhanjie9@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25scsi: libsas: Add smp_ata_check_ready_type()Jie Zhan3-2/+29
[ Upstream commit 9181ce3cb5d96f0ee28246a857ca651830fa3746 ] Create function smp_ata_check_ready_type() for LLDDs to wait for SATA devices to come up after a link reset. Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-4-zhanjie9@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 3c2673a09cf1 ("scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25clk: mxl: syscon_node_to_regmap() returns error pointersRahul Tanwar1-1/+1
[ Upstream commit 7256d1f4618b40792d1e9b9b6cb1406a13cad2dd ] Commit 036177310bac ("clk: mxl: Switch from direct readl/writel based IO to regmap based IO") introduced code resulting in below warning issued by the smatch static checker. drivers/clk/x86/clk-lgm.c:441 lgm_cgu_probe() warn: passing zero to 'PTR_ERR' Fix the warning by replacing incorrect IS_ERR_OR_NULL() with IS_ERR(). Fixes: 036177310bac ("clk: mxl: Switch from direct readl/writel based IO to regmap based IO") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Link: https://lore.kernel.org/r/49e339d4739e4ae4c92b00c1b2918af0755d4122.1666695221.git.rtanwar@maxlinear.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25clk: mxl: Fix a clk entry by adding relevant flagsRahul Tanwar3-4/+6
[ Upstream commit 106ef3bda21006fe37b62c85931230a6355d78d3 ] One of the clock entry "dcl" clk has some HW limitations. One is that its rate can only by changed by changing its parent clk's rate & two is that HW does not support enable/disable for this clk. Handle above two limitations by adding relevant flags. Add standard flag CLK_SET_RATE_PARENT to handle rate change and add driver internal flag DIV_CLK_NO_MASK to handle enable/disable. Fixes: d058fd9e8984 ("clk: intel: Add CGU clock driver for a new SoC") Reviewed-by: Yi xin Zhu <yzhu@maxlinear.com> Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Link: https://lore.kernel.org/r/a4770e7225f8a0c03c8ab2ba80434a4e8e9afb17.1665642720.git.rtanwar@maxlinear.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25clk: mxl: Add option to override gate clksRahul Tanwar2-1/+16
[ Upstream commit a5d49bd369b8588c0ee9d4d0a2c0160558a3ab69 ] In MxL's LGM SoC, gate clocks can be controlled either from CGU clk driver i.e. this driver or directly from power management driver/daemon. It is dependent on the power policy/profile requirements of the end product. To support such use cases, provide option to override gate clks enable/disable by adding a flag GATE_CLK_HW which controls if these gate clks are controlled by HW i.e. this driver or overridden in order to allow it to be controlled by power profiles instead. Reviewed-by: Yi xin Zhu <yzhu@maxlinear.com> Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Link: https://lore.kernel.org/r/bdc9c89317b5d338a6c4f1d49386b696e947a672.1665642720.git.rtanwar@maxlinear.com [sboyd@kernel.org: Add braces on many line if-else] Signed-off-by: Stephen Boyd <sboyd@kernel.org> Stable-dep-of: 106ef3bda210 ("clk: mxl: Fix a clk entry by adding relevant flags") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25clk: mxl: Remove redundant spinlocksRahul Tanwar4-91/+9
[ Upstream commit eaabee88a88a26b108be8d120fc072dfaf462cef ] Patch 1/4 of this patch series switches from direct readl/writel based register access to regmap based register access. Instead of using direct readl/writel, regmap API's are used to read, write & read-modify-write clk registers. Regmap API's already use their own spinlocks to serialize the register accesses across multiple cores in which case additional driver spinlocks becomes redundant. Hence, remove redundant spinlocks from driver in this patch 2/4. Reviewed-by: Yi xin Zhu <yzhu@maxlinear.com> Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Link: https://lore.kernel.org/r/a8a02c8773b88924503a9fdaacd37dd2e6488bf3.1665642720.git.rtanwar@maxlinear.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Stable-dep-of: 106ef3bda210 ("clk: mxl: Fix a clk entry by adding relevant flags") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25clk: mxl: Switch from direct readl/writel based IO to regmap based IORahul Tanwar5-29/+42
[ Upstream commit 036177310bac5534de44ff6a7b60a4d2c0b6567c ] Earlier version of driver used direct io remapped register read writes using readl/writel. But we need secure boot access which is only possible when registers are read & written using regmap. This is because the security bus/hook is written & coupled only with regmap layer. Switch the driver from direct readl/writel based register accesses to regmap based register accesses. Additionally, update the license headers to latest status. Reviewed-by: Yi xin Zhu <yzhu@maxlinear.com> Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Link: https://lore.kernel.org/r/2610331918206e0e3bd18babb39393a558fb34f9.1665642720.git.rtanwar@maxlinear.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Stable-dep-of: 106ef3bda210 ("clk: mxl: Fix a clk entry by adding relevant flags") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25drm/edid: Fix minimum bpc supported with DSC1.2 for HDMI sinkAnkit Nautiyal1-1/+2
[ Upstream commit 18feaf6d0784dcba888859109676adf1e0260dfd ] HF-VSDB/SCDB has bits to advertise support for 16, 12 and 10 bpc. If none of the bits are set, the minimum bpc supported with DSC is 8. This patch corrects the min bpc supported to be 8, instead of 0. Fixes: 76ee7b905678 ("drm/edid: Parse DSC1.2 cap fields from HFVSDB block") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> v2: s/DSC1.2/DSC 1.2 Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-2-ankit.k.nautiyal@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25wifi: rtl8xxxu: gen2: Turn on the rate controlBitterblue Smith1-6/+2
[ Upstream commit 791082ec0ab843e0be07c8ce3678e4c2afd2e33d ] Re-enable the function rtl8xxxu_gen2_report_connect. It informs the firmware when connecting to a network. This makes the firmware enable the rate control, which makes the upload faster. It also informs the firmware when disconnecting from a network. In the past this made reconnecting impossible because it was sending the auth on queue 0x7 (TXDESC_QUEUE_VO) instead of queue 0x12 (TXDESC_QUEUE_MGNT): wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 1/3) wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 2/3) wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 3/3) wlp0s20f0u3: authentication with 90:55:de:__:__:__ timed out Probably the firmware disables the unnecessary TX queues when it knows it's disconnected. However, this was fixed in commit edd5747aa12e ("wifi: rtl8xxxu: Fix skb misuse in TX queue selection"). Fixes: c59f13bbead4 ("rtl8xxxu: Work around issue with 8192eu and 8723bu devices not reconnecting") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/43200afc-0c65-ee72-48f8-231edd1df493@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25wifi: ath11k: fix warning in dma_free_coherent() of memory chunks while recoveryWen Gong1-3/+3
[ Upstream commit f74878433d5ade360447da5d92e9c2e535780d80 ] Commit 26f3a021b37c ("ath11k: allocate smaller chunks of memory for firmware") and commit f6f92968e1e5 ("ath11k: qmi: try to allocate a big block of DMA memory first") change ath11k to allocate the memory chunks for target twice while wlan load. It fails for the 1st time because of large memory and then changed to allocate many small chunks for the 2nd time sometimes as below log. 1st time failed: [10411.640620] ath11k_pci 0000:05:00.0: qmi firmware request memory request [10411.640625] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 6881280 [10411.640630] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 3784704 [10411.640658] ath11k_pci 0000:05:00.0: qmi dma allocation failed (6881280 B type 1), will try later with small size [10411.640671] ath11k_pci 0000:05:00.0: qmi delays mem_request 2 [10411.640677] ath11k_pci 0000:05:00.0: qmi respond memory request delayed 1 2nd time success: [10411.642004] ath11k_pci 0000:05:00.0: qmi firmware request memory request [10411.642008] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642012] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642014] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642016] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642018] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642020] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642022] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642024] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642027] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642029] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642031] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 458752 [10411.642033] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 131072 [10411.642035] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642037] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642039] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642041] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642043] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642045] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642047] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 491520 [10411.642049] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 And then commit 5962f370ce41 ("ath11k: Reuse the available memory after firmware reload") skip the ath11k_qmi_free_resource() which frees the memory chunks while recovery, after that, when run recovery test on WCN6855, a warning happened every time as below and finally leads fail for recovery. [ 159.570318] BUG: Bad page state in process kworker/u16:5 pfn:33300 [ 159.570320] page:0000000096ffdbb9 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33300 [ 159.570324] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) [ 159.570329] raw: 000fffffc0000000 0000000000000000 dead000000000122 0000000000000000 [ 159.570332] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 159.570334] page dumped because: nonzero _refcount [ 159.570440] firewire_ohci syscopyarea sysfillrect psmouse sdhci_pci ahci sysimgblt firewire_core fb_sys_fops libahci crc_itu_t cqhci drm sdhci e1000e wmi video [ 159.570460] CPU: 2 PID: 217 Comm: kworker/u16:5 Kdump: loaded Tainted: G B 5.19.0-rc1-wt-ath+ #3 [ 159.570465] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 159.570467] Workqueue: qmi_msg_handler qmi_data_ready_work [qmi_helpers] [ 159.570475] Call Trace: [ 159.570476] <TASK> [ 159.570478] dump_stack_lvl+0x49/0x5f [ 159.570486] dump_stack+0x10/0x12 [ 159.570493] bad_page+0xab/0xf0 [ 159.570502] check_free_page_bad+0x66/0x70 [ 159.570511] __free_pages_ok+0x530/0x9a0 [ 159.570517] ? __dev_printk+0x58/0x6b [ 159.570525] ? _dev_printk+0x56/0x72 [ 159.570534] ? qmi_decode+0x119/0x470 [qmi_helpers] [ 159.570543] __free_pages+0x91/0xd0 [ 159.570548] dma_free_contiguous+0x50/0x60 [ 159.570556] dma_direct_free+0xe5/0x140 [ 159.570564] dma_free_attrs+0x35/0x50 [ 159.570570] ath11k_qmi_msg_mem_request_cb+0x2ae/0x3c0 [ath11k] [ 159.570620] qmi_invoke_handler+0xac/0xe0 [qmi_helpers] [ 159.570630] qmi_handle_message+0x6d/0x180 [qmi_helpers] [ 159.570643] qmi_data_ready_work+0x2ca/0x440 [qmi_helpers] [ 159.570656] process_one_work+0x227/0x440 [ 159.570667] worker_thread+0x31/0x3d0 [ 159.570676] ? process_one_work+0x440/0x440 [ 159.570685] kthread+0xfe/0x130 [ 159.570692] ? kthread_complete_and_exit+0x20/0x20 [ 159.570701] ret_from_fork+0x22/0x30 [ 159.570712] </TASK> The reason is because when wlan start to recovery, the type, size and count is not same for the 1st and 2nd QMI_WLFW_REQUEST_MEM_IND message, Then it leads the parameter size is not correct for the dma_free_coherent(). For the chunk[1], the actual dma size is 524288 which allocate in the 2nd time of the initial wlan load phase, and the size which pass to dma_free_coherent() is 3784704 which is got in the 1st time of recovery phase, then warning above happened. Change to use prev_size of struct target_mem_chunk for the paramter of dma_free_coherent() since prev_size is the real size of last load/recovery. Also change to check both type and size of struct target_mem_chunk to reuse the memory to avoid mismatch buffer size for target. Then the warning disappear and recovery success. When the 1st QMI_WLFW_REQUEST_MEM_IND for recovery arrived, the trunk[0] is freed in ath11k_qmi_alloc_target_mem_chunk() and then dma_alloc_coherent() failed caused by large size, and then trunk[1] is freed in ath11k_qmi_free_target_mem_chunk(), the left 18 trunks will be reuse for the 2nd QMI_WLFW_REQUEST_MEM_IND message. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 5962f370ce41 ("ath11k: Reuse the available memory after firmware reload") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220928073832.16251-1-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25drm/etnaviv: don't truncate physical page addressLucas Stach1-2/+2
[ Upstream commit d37c120b73128690434cc093952439eef9d56af1 ] While the interface for the MMU mapping takes phys_addr_t to hold a full 64bit address when necessary and MMUv2 is able to map physical addresses with up to 40bit, etnaviv_iommu_map() truncates the address to 32bits. Fix this by using the correct type. Fixes: 931e97f3afd8 ("drm/etnaviv: mmuv2: support 40 bit phys address") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22nvme-pci: refresh visible attrs for cmb attributesKeith Busch1-0/+8
commit e917a849c3fc317c4a5f82bb18726000173d39e6 upstream. The sysfs group containing the cmb attributes is registered before the driver knows if they need to be visible or not. Update the group when cmb attributes are known to exist so the visibility setting is correct. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217037 Fixes: 86adbf0cdb9ec65 ("nvme: simplify transport specific device attribute handling") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22nvme-rdma: stop auth work after tearing down queues in error recoverySagi Grimberg1-1/+1
[ Upstream commit 91c11d5f32547a08d462934246488fe72f3d44c3 ] when starting error recovery there might be a authentication work running, and it involves I/O commands. Given the controller is tearing down there is no chance for the I/O to complete other than timing out which may unnecessarily take a full io timeout. So first tear down the queues, fail/cancel all inflight I/O (including potentially authentication) and only then stop authentication. This ensures that failover is not stalled due to blocked authentication I/O. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22nvme-tcp: stop auth work after tearing down queues in error recoverySagi Grimberg1-1/+1
[ Upstream commit 1f1a4f89562d3b33b6ca4fc8a4f3bd4cd35ab4ea ] when starting error recovery there might be a authentication work running, and it involves I/O commands. Given the controller is tearing down there is no chance for the I/O to complete other than timing out which may unnecessarily take a full io timeout. So first tear down the queues, fail/cancel all inflight I/O (including potentially authentication) and only then stop authentication. This ensures that failover is not stalled due to blocked authentication I/O. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22i40e: Add checking for null for nlmsg_find_attr()Natalia Petrova1-0/+2
[ Upstream commit 7fa0b526f865cb42aa33917fd02a92cb03746f4d ] The result of nlmsg_find_attr() 'br_spec' is dereferenced in nla_for_each_nested(), but it can take NULL value in nla_find() function, which will result in an error. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22ixgbe: add double of VLAN header when computing the max MTUJason Xing2-2/+3
commit 0967bf837784a11c65d66060623a74e65211af0b upstream. Include the second VLAN HLEN into account when computing the maximum MTU size as other drivers do. Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22igb: Fix PPS input and output using 3rd and 4th SDPMiroslav Lichvar1-6/+6
commit 207ce626add80ddd941f62fc2fe5d77586e0801b upstream. Fix handling of the tsync interrupt to compare the pin number with IGB_N_SDP instead of IGB_N_EXTTS/IGB_N_PEROUT and fix the indexing to the perout array. Fixes: cf99c1dd7b77 ("igb: move PEROUT and EXTTS isr logic to separate functions") Reported-by: Matt Corallo <ntp-lists@mattcorallo.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230213185822.3960072-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22igb: conditionalize I2C bit banging on external thermal sensor supportCorinna Vinschen1-10/+32
commit 5d54cb1767e06025819daa6769e0f18dcbc60936 upstream. Commit a97f8783a937 ("igb: unbreak I2C bit-banging on i350") introduced code to change I2C settings to bit banging unconditionally. However, this patch introduced a regression: On an Intel S2600CWR Server Board with three NICs: - 1x dual-port copper Intel I350 Gigabit Network Connection [8086:1521] (rev 01) fw 1.63, 0x80000dda - 2x quad-port SFP+ with copper SFP Avago ABCU-5700RZ Intel I350 Gigabit Fiber Network Connection [8086:1522] (rev 01) fw 1.52.0 the SFP NICs no longer get link at all. Reverting commit a97f8783a937 or switching to the Intel out-of-tree driver both fix the problem. Per the igb out-of-tree driver, I2C bit banging on i350 depends on support for an external thermal sensor (ETS). However, commit a97f8783a937 added bit banging unconditionally. Additionally, the out-of-tree driver always calls init_thermal_sensor_thresh on probe, while our driver only calls init_thermal_sensor_thresh only in igb_reset(), and only if an ETS is present, ignoring the internal thermal sensor. The affected SFPs don't provide an ETS. Per Intel, the behaviour is a result of i350 firmware requirements. This patch fixes the problem by aligning the behaviour to the out-of-tree driver: - split igb_init_i2c() into two functions: - igb_init_i2c() only performs the basic I2C initialization. - igb_set_i2c_bb() makes sure that E1000_CTRL_I2C_ENA is set and enables bit-banging. - igb_probe() only calls igb_set_i2c_bb() if an ETS is present. - igb_probe() calls init_thermal_sensor_thresh() unconditionally. - igb_reset() aligns its behaviour to igb_probe(), i. e., call igb_set_i2c_bb() if an ETS is present and call init_thermal_sensor_thresh() unconditionally. Fixes: a97f8783a937 ("igb: unbreak I2C bit-banging on i350") Tested-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Co-developed-by: Jamie Bainbridge <jbainbri@redhat.com> Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com> Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230214185549.1306522-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22net: stmmac: Restrict warning on disabling DMA store and fwd modeCristian Ciocaltea1-1/+1
commit 05d7623a892a9da62da0e714428e38f09e4a64d8 upstream. When setting 'snps,force_thresh_dma_mode' DT property, the following warning is always emitted, regardless the status of force_sf_dma_mode: dwmac-starfive 10020000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set. Do not print the rather misleading message when DMA store and forward mode is already disabled. Fixes: e2a240c7d3bc ("driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20230210202126.877548-1-cristian.ciocaltea@collabora.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22bnxt_en: Fix mqprio and XDP ring checking logicMichael Chan1-2/+6
commit 2038cc592811209de20c4e094ca08bfb1e6fbc6c upstream. In bnxt_reserve_rings(), there is logic to check that the number of TX rings reserved is enough to cover all the mqprio TCs, but it fails to account for the TX XDP rings. So the check will always fail if there are mqprio TCs and TX XDP rings. As a result, the driver always fails to initialize after the XDP program is attached and the device will be brought down. A subsequent ifconfig up will also fail because the number of TX rings is set to an inconsistent number. Fix the check to properly account for TX XDP rings. If the check fails, set the number of TX rings back to a consistent number after calling netdev_reset_tc(). Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22net: stmmac: fix order of dwmac5 FlexPPS parametrization sequenceJohannes Zink1-1/+2
commit 4562c65ec852067c6196abdcf2d925f08841dcbc upstream. So far changing the period by just setting new period values while running did not work. The order as indicated by the publicly available reference manual of the i.MX8MP [1] indicates a sequence: * initiate the programming sequence * set the values for PPS period and start time * start the pulse train generation. This is currently not used in dwmac5_flex_pps_config(), which instead does: * initiate the programming sequence and immediately start the pulse train generation * set the values for PPS period and start time This caused the period values written not to take effect until the FlexPPS output was disabled and re-enabled again. This patch fix the order and allows the period to be set immediately. [1] https://www.nxp.com/webapp/Download?colCode=IMX8MPRM Fixes: 9a8a02c9d46d ("net: stmmac: Add Flexible PPS support") Signed-off-by: Johannes Zink <j.zink@pengutronix.de> Link: https://lore.kernel.org/r/20230210143937.3427483-1-j.zink@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22net/usb: kalmia: Don't pass act_len in usb_bulk_msg error pathMiko Larsson1-4/+4
commit c68f345b7c425b38656e1791a0486769a8797016 upstream. syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/ Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730") Reported-and-tested-by: syzbot+cd80c5ef5121bfe85b55@syzkaller.appspotmail.com Signed-off-by: Miko Larsson <mikoxyzzz@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22ice: xsk: Fix cleaning of XDP_TX framesLarysa Zaremba1-6/+9
commit 1f090494170ea298530cf1285fb8d078e355b4c0 upstream. Incrementation of xsk_frames inside the for-loop produces infinite loop, if we have both normal AF_XDP-TX and XDP_TXed buffers to complete. Split xsk_frames into 2 variables (xsk_frames and completed_frames) to eliminate this bug. Fixes: 29322791bc8b ("ice: xsk: change batched Tx descriptor cleaning") Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230209160130.1779890-1-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22net: ethernet: ti: am65-cpsw: Add RX DMA Channel Teardown QuirkSiddharth Vadapalli2-1/+12
commit 0ed577e7e8e508c24e22ba07713ecc4903e147c3 upstream. In TI's AM62x/AM64x SoCs, successful teardown of RX DMA Channel raises an interrupt. The process of servicing this interrupt involves flushing all pending RX DMA descriptors and clearing the teardown completion marker (TDCM). The am65_cpsw_nuss_rx_packets() function invoked from the RX NAPI callback services the interrupt. Thus, it is necessary to wait for this handler to run, drain all packets and clear TDCM, before calling napi_disable() in am65_cpsw_nuss_common_stop() function post channel teardown. If napi_disable() executes before ensuring that TDCM is cleared, the TDCM remains set when the interfaces are down, resulting in an interrupt storm when the interfaces are brought up again. Since the interrupt raised to indicate the RX DMA Channel teardown is specific to the AM62x and AM64x SoCs, add a quirk for it. Fixes: 4f7cce272403 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g") Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230209084432.189222-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22net: bgmac: fix BCM5358 support by setting correct flagsRafał Miłecki1-3/+3
commit d61615c366a489646a1bfe5b33455f916762d5f4 upstream. Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were incorrectly unified. Chip package values are not unique and cannot be checked independently. They are meaningful only in a context of a given chip. Packages BCM5358 and BCM47188 share the same value but then belong to different chips. Code unification resulted in treating BCM5358 as BCM47188 and broke its initialization. Link: https://github.com/openwrt/openwrt/issues/8278 Fixes: cb1b0f90acfe ("net: ethernet: bgmac: unify code of the same family") Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22i40e: add double of VLAN header when computing the max MTUJason Xing1-1/+1
commit ce45ffb815e8e238f05de1630be3969b6bb15e4e upstream. Include the second VLAN HLEN into account when computing the maximum MTU size as other drivers do. Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22ixgbe: allow to increase MTU to 3K with XDP enabledJason Xing1-9/+16
commit f9cd6a4418bac6a046ee78382423b1ae7565fb24 upstream. Recently I encountered one case where I cannot increase the MTU size directly from 1500 to a much bigger value with XDP enabled if the server is equipped with IXGBE card, which happened on thousands of servers in production environment. After applying the current patch, we can set the maximum MTU size to 3K. This patch follows the behavior of changing MTU as i40e/ice does. References: [1] commit 23b44513c3e6 ("ice: allow 3k MTU for XDP") [2] commit 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22ice: fix lost multicast packets in promisc modeJesse Brandeburg1-0/+26
commit 43fbca02c2ddc39ff5879b6f3a4a097b1ba02098 upstream. There was a problem reported to us where the addition of a VF with an IPv6 address ending with a particular sequence would cause the parent device on the PF to no longer be able to respond to neighbor discovery packets. In this case, we had an ovs-bridge device living on top of a VLAN, which was on top of a PF, and it would not be able to talk anymore (the neighbor entry would expire and couldn't be restored). The root cause of the issue is that if the PF is asked to be in IFF_PROMISC mode (promiscuous mode) and it had an ipv6 address that needed the 33:33:ff:00:00:04 multicast address to work, then when the VF was added with the need for the same multicast address, the VF would steal all the traffic destined for that address. The ice driver didn't auto-subscribe a request of IFF_PROMISC to the "multicast replication from other port's traffic" meaning that it won't get for instance, packets with an exact destination in the VF, as above. The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04, results in no packets for that multicast address making it to the PF (which is in promisc but NOT "multicast replication"). The fix is to enable "multicast promiscuous" whenever the driver is asked to enable IFF_PROMISC, and make sure to disable it when appropriate. Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT listMatt Roper1-7/+7
commit d5a1224aa68c8b124a4c5c390186e571815ed390 upstream. The UNSLICE_UNIT_LEVEL_CLKGATE register programmed by this workaround has 'BUS' style reset, indicating that it does not lose its value on engine resets. Furthermore, this register is part of the GT forcewake domain rather than the RENDER domain, so it should not be impacted by RCS engine resets. As such, we should implement this on the GT workaround list rather than an engine list. Bspec: 19219 Fixes: 3551ff928744 ("drm/i915/gen11: Moving WAs to rcs_engine_wa_init()") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-2-matthew.d.roper@intel.com (cherry picked from commit 5f21dc07b52eb54a908e66f5d6e05a87bcb5b049) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22drm/vc4: Fix YUV plane handling when planes are in different buffersDave Stevenson1-2/+4
commit 6b77b16de75a6efc0870b1fa467209387cbee8f3 upstream. YUV images can either be presented as one allocation with offsets for the different planes, or multiple allocations with 0 offsets. The driver only ever calls drm_fb_[dma|cma]_get_gem_obj with plane index 0, therefore any application using the second approach was incorrectly rendered. Correctly determine the address for each plane, removing the assumption that the base address is the same for each. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230127155708.454704-1-maxime@cerno.tech Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22drm/vc4: crtc: Increase setup cost in core clock calculation to handle ↵Dom Cobley1-1/+1
extreme reduced blanking commit 247a631f9c0ffb37ed0786a94cb4c5f2b6fc7ab1 upstream. The formula that determines the core clock requirement based on pixel clock and blanking has been determined experimentally to minimise the clock while supporting all modes we've seen. A new reduced blanking mode (4kp60 at 533MHz rather than the standard 594MHz) has been seen that doesn't produce a high enough clock and results in "flip_done timed out" error. Increase the setup cost in the formula to make this work. The result is a reduced blanking mode increases by up to 7MHz while leaving the standard timing mode untouched Link: https://github.com/raspberrypi/linux/issues/4446 Fixes: 16e101051f32 ("drm/vc4: Increase the core clock based on HVS load") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230127145558.446123-1-maxime@cerno.tech Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22gpio: sim: fix a memory leakBartosz Golaszewski1-1/+1
commit 79eeab1d85e0fee4c0bc36f3b6ddf3920f39f74b upstream. Fix an inverted logic bug in gpio_sim_remove_hogs() that leads to GPIO hog structures never being freed. Fixes: cb8c474e79be ("gpio: sim: new testing module") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22ata: libata-core: Disable READ LOG DMA EXT for Samsung MZ7LHPatrick McLean1-0/+3
commit ead089577e0f55b238f980d9f62eaa90b7b64672 upstream. Samsung MZ7LH drives are spewing messages like this in to dmesg with AMD SATA controllers: ata1.00: exception Emask 0x0 SAct 0x7e0000 SErr 0x0 action 0x6 frozen ata1.00: failed command: SEND FPDMA QUEUED ata1.00: cmd 64/01:88:00:00:00/00:00:00:00:00/a0 tag 17 ncq dma 512 out res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Since this was seen previously with SSD 840 EVO drives in https://bugzilla.kernel.org/show_bug.cgi?id=203475 let's add the same fix for these drives as the EVOs have, since they likely have very similar firmwares. Signed-off-by: Patrick McLean <chutzpah@gentoo.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22ata: ahci: Add Tiger Lake UP{3,4} AHCI controllerSimon Gaiser1-0/+1
commit 104ff59af73aba524e57ae0fef70121643ff270e upstream. Mark the Tiger Lake UP{3,4} AHCI controller as "low_power". This enables S0ix to work out of the box. Otherwise this isn't working unless the user manually sets /sys/class/scsi_host/*/link_power_management_policy. Intel lists a total of 4 SATA controller IDs in [1] for those mobile PCHs. This commit just adds the "AHCI" variant since I only tested those. [1]: https://cdrdv2.intel.com/v1/dl/getContent/631119 Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> CC: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22mmc: mmc_spi: fix error handling in mmc_spi_probe()Yang Yingliang1-4/+4
commit cf4c9d2ac1e42c7d18b921bec39486896645b714 upstream. If mmc_add_host() fails, it doesn't need to call mmc_remove_host(), or it will cause null-ptr-deref, because of deleting a not added device in mmc_remove_host(). To fix this, goto label 'fail_glue_init', if mmc_add_host() fails, and change the label 'fail_add_host' to 'fail_gpiod_request'. Fixes: 15a0580ced08 ("mmc_spi host driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/r/20230131013835.3564011-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22mmc: sdio: fix possible resource leaks in some error pathsYang Yingliang2-15/+14
commit 605d9fb9556f8f5fb4566f4df1480f280f308ded upstream. If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can not release the resources, because the sdio function is not presented in these two cases, it won't call of_node_put() or put_device(). To fix these leaks, make sdio_func_present() only control whether device_del() needs to be called or not, then always call of_node_put() and put_device(). In error case in sdio_init_func(), the reference of 'card->dev' is not get, to avoid redundant put in sdio_free_func_cis(), move the get_device() to sdio_alloc_func() and put_device() to sdio_release_func(), it can keep the get/put function be balanced. Without this patch, while doing fault inject test, it can get the following leak reports, after this fix, the leak is gone. unreferenced object 0xffff888112514000 (size 2048): comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s) hex dump (first 32 bytes): 00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff ..o.....`X...... 10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff .@Q......@Q..... backtrace: [<000000009e5931da>] kmalloc_trace+0x21/0x110 [<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core] [<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core] [<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core] [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core] unreferenced object 0xffff888112511000 (size 2048): comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s) hex dump (first 32 bytes): 00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff .@Q......X...... 10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff ..Q.......Q..... backtrace: [<000000009e5931da>] kmalloc_trace+0x21/0x110 [<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core] [<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core] [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core] Fixes: 3d10a1ba0d37 ("sdio: fix reference counting in sdio_remove_func()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230130125808.3471254-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't setHeiner Kallweit1-10/+13
commit 6ea6b95a7e3ec2015954cb514ee9dbc6dc80ec8f upstream. Some SDIO WiFi modules stopped working after SDIO interrupt mode was added if cap_sdio_irq isn't set in device tree. This patch was confirmed to fix the issue. Fixes: 066ecde6d826 ("mmc: meson-gx: add SDIO interrupt support") Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com> Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/816cba9f-ff92-31a2-60f0-aca542d1d13e@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22mmc: jz4740: Work around bug on JZ4760(B)Paul Cercueil1-0/+10
commit 3f18c5046e633cc4bbad396b74c05d46d353033d upstream. On JZ4760 and JZ4760B, SD cards fail to run if the maximum clock rate is set to 50 MHz, even though the controller officially does support it. Until the actual bug is found and fixed, limit the maximum clock rate to 24 MHz. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230131210229.68129-1-paul@crapouillou.net Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22drm/vmwgfx: Do not drop the reference to the handle too soonZack Rusin7-10/+20
commit a950b989ea29ab3b38ea7f6e3d2540700a3c54e8 upstream. v3: Fix vmw_user_bo_lookup which was also dropping the gem reference before the kernel was done with buffer depending on userspace doing the right thing. Same bug, different spot. It is possible for userspace to predict the next buffer handle and to destroy the buffer while it's still used by the kernel. Delay dropping the internal reference on the buffers until kernel is done with them. Instead of immediately dropping the gem reference in vmw_user_bo_lookup and vmw_gem_object_create_with_handle let the callers decide when they're ready give the control back to userspace. Also fixes the second usage of vmw_gem_object_create_with_handle in vmwgfx_surface.c which wasn't grabbing an explicit reference to the gem object which could have been destroyed by the userspace on the owning surface at any point. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM") Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230211050514.2431155-1-zack@kde.org (cherry picked from commit 9ef8d83e8e25d5f1811b3a38eb1484f85f64296c) Cc: <stable@vger.kernel.org> # v5.17+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22drm/vmwgfx: Stop accessing buffer objects which failed initZack Rusin2-3/+5
commit 1a6897921f52ceb2c8665ef826e405bd96385159 upstream. ttm_bo_init_reserved on failure puts the buffer object back which causes it to be deleted, but kfree was still being called on the same buffer in vmw_bo_create leading to a double free. After the double free the vmw_gem_object_create_with_handle was setting the gem function objects before checking the return status of vmw_bo_create leading to null pointer access. Fix the entire path by relaying on ttm_bo_init_reserved to delete the buffer objects on failure and making sure the return status is checked before setting the gem function objects on the buffer object. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM") Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208180050.2093426-1-zack@kde.org (cherry picked from commit 36d421e632e9a0e8375eaed0143551a34d81a7e3) Cc: <stable@vger.kernel.org> # v5.17+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22drm/amd/display: Fail atomic_check early on normalize_zpos errorLeo Li1-1/+5
commit 2a00299e7447395d0898e7c6214817c06a61a8e8 upstream. [Why] drm_atomic_normalize_zpos() can return an error code when there's modeset lock contention. This was being ignored. [How] Bail out of atomic check if normalize_zpos() returns an error. Fixes: b261509952bc ("drm/amd/display: Fix double cursor on non-video RGB MPO") Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22drm/amd/amdgpu: fix warning during suspendJack Xiao2-1/+4
commit 8f32378986218812083b127da5ba42d48297d7c4 upstream. Freeing memory was warned during suspend. Move the self test out of suspend. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2151825 Cc: jfalempe@redhat.com Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22drm: Disable dynamic debug as brokenVille Syrjälä1-1/+2
commit bb2ff6c27bc9e1da4d3ec5e7b1d6b9df1092cb5a upstream. CONFIG_DRM_USE_DYNAMIC_DEBUG breaks debug prints for (at least modular) drm drivers. The debug prints can be reinstated by manually frobbing /sys/module/drm/parameters/debug after the fact, but at that point the damage is done and all debugs from driver probe are lost. This makes drivers totally undebuggable. There's a more complete fix in progress [1], with further details, but we need this fixed in stable kernels. Mark the feature as broken and disable it by default, with hopes distros follow suit and disable it as well. [1] https://lore.kernel.org/r/20230125203743.564009-1-jim.cromie@gmail.com Fixes: 84ec67288c10 ("drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro") Cc: Jim Cromie <jim.cromie@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.1+ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230207143337.2126678-1-jani.nikula@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22fbdev: Fix invalid page access after closing deferred I/O devicesTakashi Iwai2-1/+13
commit 3efc61d95259956db25347e2a9562c3e54546e20 upstream. When a fbdev with deferred I/O is once opened and closed, the dirty pages still remain queued in the pageref list, and eventually later those may be processed in the delayed work. This may lead to a corruption of pages, hitting an Oops. This patch makes sure to cancel the delayed work and clean up the pageref list at closing the device for addressing the bug. A part of the cleanup code is factored out as a new helper function that is called from the common fb_release(). Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Miko Larsson <mikoxyzzz@gmail.com> Fixes: 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref struct") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230129082856.22113-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22vmxnet3: move rss code block under eop descriptorRonak Doshi1-25/+25
commit ec76d0c2da5c6dfb6a33f1545cc15997013923da upstream. Commit b3973bb40041 ("vmxnet3: set correct hash type based on rss information") added hashType information into skb. However, rssType field is populated for eop descriptor. This can lead to incorrectly reporting of hashType for packets which use multiple rx descriptors. Multiple rx descriptors are used for Jumbo frame or LRO packets, which can hit this issue. This patch moves the RSS codeblock under eop descritor. Cc: stable@vger.kernel.org Fixes: b3973bb40041 ("vmxnet3: set correct hash type based on rss information") Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Peng Li <lpeng@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Link: https://lore.kernel.org/r/20230208223900.5794-1-doshir@vmware.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22of: reserved_mem: Have kmemleak ignore dynamically allocated reserved memIsaac J. Manjarres1-1/+2
commit ce4d9a1ea35ac5429e822c4106cb2859d5c71f3e upstream. Patch series "Fix kmemleak crashes when scanning CMA regions", v2. When trying to boot a device with an ARM64 kernel with the following config options enabled: CONFIG_DEBUG_PAGEALLOC=y CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y CONFIG_DEBUG_KMEMLEAK=y a crash is encountered when kmemleak starts to scan the list of gray or allocated objects that it maintains. Upon closer inspection, it was observed that these page-faults always occurred when kmemleak attempted to scan a CMA region. At the moment, kmemleak is made aware of CMA regions that are specified through the devicetree to be dynamically allocated within a range of addresses. However, kmemleak should not need to scan CMA regions or any reserved memory region, as those regions can be used for DMA transfers between drivers and peripherals, and thus wouldn't contain anything useful for kmemleak. Additionally, since CMA regions are unmapped from the kernel's address space when they are freed to the buddy allocator at boot when CONFIG_DEBUG_PAGEALLOC is enabled, kmemleak shouldn't attempt to access those memory regions, as that will trigger a crash. Thus, kmemleak should ignore all dynamically allocated reserved memory regions. This patch (of 1): Currently, kmemleak ignores dynamically allocated reserved memory regions that don't have a kernel mapping. However, regions that do retain a kernel mapping (e.g. CMA regions) do get scanned by kmemleak. This is not ideal for two reasons: 1 kmemleak works by scanning memory regions for pointers to allocated objects to determine if those objects have been leaked or not. However, reserved memory regions can be used between drivers and peripherals for DMA transfers, and thus, would not contain pointers to allocated objects, making it unnecessary for kmemleak to scan these reserved memory regions. 2 When CONFIG_DEBUG_PAGEALLOC is enabled, along with kmemleak, the CMA reserved memory regions are unmapped from the kernel's address space when they are freed to buddy at boot. These CMA reserved regions are still tracked by kmemleak, however, and when kmemleak attempts to scan them, a crash will happen, as accessing the CMA region will result in a page-fault, since the regions are unmapped. Thus, use kmemleak_ignore_phys() for all dynamically allocated reserved memory regions, instead of those that do not have a kernel mapping associated with them. Link: https://lkml.kernel.org/r/20230208232001.2052777-1-isaacmanjarres@google.com Link: https://lkml.kernel.org/r/20230208232001.2052777-2-isaacmanjarres@google.com Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com> Cc: Nick Kossifidis <mick@ics.forth.gr> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Rob Herring <robh@kernel.org> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Saravana Kannan <saravanak@google.com> Cc: <stable@vger.kernel.org> [5.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI matchHans de Goede1-0/+9
[ Upstream commit eecf2acd4a580e9364e5087daf0effca60a240b7 ] Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet, pointing to the same chuwi_vi8_data as the existing CWI506 version DMI match. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230202103413.331459-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22drm/amd/display: Properly handle additional cases where DCN is not supportedAlex Deucher1-0/+11
[ Upstream commit 6fc547a5a2ef5ce05b16924106663ab92f8f87a7 ] There could be boards with DCN listed in IP discovery, but no display hardware actually wired up. In this case the vbios display table will not be populated. Detect this case and skip loading DM when we detect it. v2: Mark DCN as harvested as well so other display checks elsewhere in the driver are handled properly. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22drm/amdgpu: Enable vclk dclk node for gc11.0.3Yiqing Yao1-2/+4
[ Upstream commit ac7170082c0e140663f0853d3de733a5341ce7b0 ] These sysfs nodes are tested supported, so enable them. Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 10:51:54 +0300