| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi and can.
Current release - regressions:
- phy: don't WARN for PHY_UP state in mdio_bus_phy_resume()
- wifi: fix locking in mac80211 mlme
- eth:
- revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()"
- mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
Previous releases - regressions:
- wifi: fix regression with non-QoS drivers
Previous releases - always broken:
- mptcp: fix unreleased socket in accept queue
- wifi:
- don't start TX with fq->lock to fix deadlock
- fix memory corruption in minstrel_ht_update_rates()
- eth:
- macb: fix ZynqMP SGMII non-wakeup source resume failure
- mt7531: only do PLL once after the reset
- usbnet: fix memory leak in usbnet_disconnect()
Misc:
- usb: qmi_wwan: add new usb-id for Dell branded EM7455"
* tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
mptcp: fix unreleased socket in accept queue
mptcp: factor out __mptcp_close() without socket lock
net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2}
net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge
can: c_can: don't cache TX messages for C_CAN cores
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
selftests: Fix the if conditions of in test_extra_filter()
net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume()
net: stmmac: power up/down serdes in stmmac_open/release
wifi: mac80211: mlme: Fix double unlock on assoc success handling
wifi: mac80211: mlme: Fix missing unlock on beacon RX
wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()
wifi: mac80211: fix regression with non-QoS drivers
wifi: mac80211: ensure vif queues are operational after start
wifi: mac80211: don't start TX with fq->lock to fix deadlock
wifi: cfg80211: fix MCS divisor value
net: hippi: Add missing pci_disable_device() in rr_init_one()
net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- small fixes for iqs62x-keys and melfas_mip4 drivers
- corrected register address in snvs_pwrkey driver
- Synaptic driver will stop trying to use intertouch (native) mode on
some Lenovo AMD devices
* tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address
Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1
Input: iqs62x-keys - drop unused device node references
Input: melfas_mip4 - fix return value check in mip4_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Three late patches to fix problems discovered recently:
- Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)
- Two patches to fix setting the maximum queue depth of libsas owned
ATA devices (from me)"
* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Fix device queue depth control
ata: libata-scsi: Fix initialization of device queue depth
libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: xsk: ZC changes
Maciej Fijalkowski says:
This set consists of two fixes to issues that were either pointed out on
indirectly (John was reviewing AF_XDP selftests that were testing ice's
ZC support) mailing list or were directly reported by customers.
First patch allows user space to see done descriptor in CQ even after a
single frame being transmitted and second patch removes the need for
having HW rings sized to power of 2 number of descriptors when used
against AF_XDP.
I also forgot to mention that due to the current Tx cleaning algorithm,
4k HW ring was broken and these two patches bring it back to life, so we
kill two birds with one stone.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
====================
Link: https://lore.kernel.org/r/20220927164112.4011983-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bitmasks applied in RX_DMA_GET_SPORT and RX_DMA_GET_SPORT_V2 macros
were swapped. Fix that.
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes: 160d3a9b192985 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/YzMW+mg9UsaCdKRQ@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the following set of commands fails:
$ ip link add br0 type bridge # vlan_filtering 0
$ ip link set swp0 master br0
$ bridge vlan
port vlan-id
swp0 1 PVID Egress Untagged
$ bridge vlan add dev swp0 vid 10
Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs.
Dumping ocelot->vlans, one can see that the 2 egress-untagged VLANs on swp0 are
vid 1 (the bridge PVID) and vid 4094, a PVID used privately by the driver for
VLAN-unaware bridging. So this is why bridge vid 10 is refused, despite
'bridge vlan' showing a single egress untagged VLAN.
As mentioned in the comment added, having this private VLAN does not impose
restrictions to the hardware configuration, yet it is a bookkeeping problem.
There are 2 possible solutions.
One is to make the functions that operate on VLAN-unaware pvids:
- ocelot_add_vlan_unaware_pvid()
- ocelot_del_vlan_unaware_pvid()
- ocelot_port_setup_dsa_8021q_cpu()
- ocelot_port_teardown_dsa_8021q_cpu()
call something different than ocelot_vlan_member_(add|del)(), the latter being
the real problem, because it allocates a struct ocelot_bridge_vlan *vlan which
it adds to ocelot->vlans. We don't really *need* the private VLANs in
ocelot->vlans, it's just that we have the extra convenience of having the
vlan->portmask cached in software (whereas without these structures, we'd have
to create a raw ocelot_vlant_rmw_mask() procedure which reads back the current
port mask from hardware).
The other solution is to filter out the private VLANs from
ocelot_port_num_untagged_vlans(), since they aren't what callers care about.
We only need to do this to the mentioned function and not to
ocelot_port_num_tagged_vlans(), because private VLANs are never egress-tagged.
Nothing else seems to be broken in either solution, but the first one requires
more rework which will conflict with the net-next change 36a0bf443585 ("net:
mscc: ocelot: set up tag_8021q CPU ports independent of user port affinity"),
and I'd like to avoid that. So go with the other one.
Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220927122042.1100231-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irqchip fixes from Borislav Petkov:
"More irqchip fixes for 6.0 from Marc Zyngier. Stuff got left hanging
due to the whole Plumbers and vacations commotion.
- A couple of configuration fixes for the recently merged Loongarch
drivers
- A fix to avoid dynamic allocation of a cpumask which was causing
issues with PREEMPT_RT and the GICv3 ITS
- A tightening of an error check in the stm32 exti driver"
* tag 'irq_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/loongson-pch-lpc: Add dependence on LoongArch
irqchip: Select downstream irqchip drivers for LoongArch CPU
irqchip/gic-v3-its: Remove cpumask_var_t allocation
irqchip/stm32-exti: Remove check on always false condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes. This time there is also a fix for the ARM SCMI
firmware driver, which has been acked by Sudeep Holla, the maintainer.
MMC core:
- Terminate infinite loop in SD-UHS voltage switch
MMC host:
- hsq: Fix kernel crash in the recovery path
- moxart: Fix bus width configurations
- sdhci: Fix kernel panic for cqe irq
ARM_SCMI:
- Fixup clock management by reverting 'firmware: arm_scmi: Add clock
management to the SCMI power domain'"
* tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: hsq: Fix data stomping during mmc recovery
Revert "firmware: arm_scmi: Add clock management to the SCMI power domain"
mmc: core: Terminate infinite loop in SD-UHS voltage switch
mmc: moxart: fix 4-bit bus width and remove 8-bit bus width
mmc: sdhci: Fix host->cmd is null
|
|
The function __ata_change_queue_depth() uses the helper
ata_scsi_find_dev() to get the ata_device structure of a scsi device and
set that device maximum queue depth. However, when the ata device is
managed by libsas, ata_scsi_find_dev() returns NULL, turning
__ata_change_queue_depth() into a nop, which prevents the user from
setting the maximum queue depth of ATA devices used with libsas based
HBAs.
Fix this by renaming __ata_change_queue_depth() to
ata_change_queue_depth() and adding a pointer to the ata_device
structure of the target device as argument. This pointer is provided by
ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of
a libata managed device and by sas_change_queue_depth() using
sas_to_ata_dev() in the case of a libsas managed ata device.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
|
|
For SATA devices supporting NCQ, drivers using libsas first initialize a
scsi device queue depth based on the controller and device capabilities,
leading to the scsi device queue_depth field being 32 (ATA maximum queue
depth) for most setup. However, if libata was loaded using the
force=[ID]]noncq argument, the default queue depth should be set to 1 to
reflect the fact that queuable commands will never be used. This is
consistent with manually setting a device queue depth to 1 through sysfs
as that disables NCQ use for the device.
Fix ata_scsi_dev_config() to honor the noncq parameter by sertting the
device queue depth to 1 for devices that do not have the ATA_DFLAG_NCQ
flag set.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
|
|
As Jacob noticed, the optimization introduced in 387da6bc7a82 ("can:
c_can: cache frames to operate as a true FIFO") doesn't properly work
on C_CAN, but on D_CAN IP cores. The exact reasons are still unknown.
For now disable caching if CAN frames in the TX path for C_CAN cores.
Fixes: 387da6bc7a82 ("can: c_can: cache frames to operate as a true FIFO")
Link: https://lore.kernel.org/all/20220928083354.1062321-1-mkl@pengutronix.de
Link: https://lore.kernel.org/all/15a8084b-9617-2da1-6704-d7e39d60643b@gmail.com
Reported-by: Jacob Kroon <jacob.kroon@gmail.com>
Tested-by: Jacob Kroon <jacob.kroon@gmail.com>
Cc: stable@vger.kernel.org # v5.15
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused by
invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI bus
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual path in
the linux-firmware package
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle"
* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: integrator: Fix DMA ranges
ARM: dts: integrator: Tag PCI host with device_type
ARM: sunplus: fix serial console kconfig and build problems
reset: npcm: fix iprst2 and iprst4 setting
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
ARM: dts: am5748: keep usb4_tm disabled
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
ARM: dts: am33xx: Fix MMCHS0 dma properties
|
|
We had multiple customers in the past months that reported commit
296f13ff3854 ("ice: xsk: Force rings to be sized to power of 2")
makes them unable to use ring size of 8160 in conjunction with AF_XDP.
Remove this restriction.
Fixes: 296f13ff3854 ("ice: xsk: Force rings to be sized to power of 2")
CC: Alasdair McWilliam <alasdair.mcwilliam@outlook.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
AF_XDP Tx descriptor cleaning in ice driver currently works in a "lazy"
way - descriptors are not cleaned immediately after send. We rather hold
on with cleaning until we see that free space in ring drops below
particular threshold. This was supposed to reduce the amount of
unnecessary work related to cleaning and instead of keeping the ring
empty, ring was rather saturated.
In AF_XDP realm cleaning Tx descriptors implies producing them to CQ.
This is a way of letting know user space that particular descriptor has
been sent, as John points out in [0].
We tried to implement serial descriptor cleaning which would be used in
conjunction with batched cleaning but it made code base more convoluted
and probably harder to maintain in future. Therefore we step away from
batched cleaning in a current form in favor of an approach where we set
RS bit on every last descriptor from a batch and clean always at the
beginning of ice_xmit_zc().
This means that we give up a bit of Tx performance, but this doesn't
hurt l2fwd scenario which is way more meaningful than txonly as this can
be treaten as AF_XDP based packet generator. l2fwd is not hurt due to
the fact that Tx side is much faster than Rx and Rx is the one that has
to catch Tx up.
FWIW Tx descriptors are still produced in a batched way.
[0]: https://lore.kernel.org/bpf/62b0a20232920_3573208ab@john.notmuch/
Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220926150740.6684-3-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both i.MX6 and i.MX8 reference manuals list 0xBF8 as SNVS_HPVIDR1
(chapters 57.9 and 6.4.5 respectively).
Without this, trying to read the revision number results in 0 on
all revisions, causing the i.MX6 quirk to apply on all platforms,
which in turn causes the driver to synthesise power button release
events instead of passing the real one as they happen even on
platforms like i.MX8 where that's not wanted.
Fixes: 1a26c920717a ("Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q")
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4599101.ElGaqSPkdT@pliszka
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The block device uses multiple queues to access emmc. There will be up to 3
requests in the hsq of the host. The current code will check whether there
is a request doing recovery before entering the queue, but it will not check
whether there is a request when the lock is issued. The request is in recovery
mode. If there is a request in recovery, then a read and write request is
initiated at this time, and the conflict between the request and the recovery
request will cause the data to be trampled.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Fixes: 511ce378e16f ("mmc: Add MMC host software queue support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220916090506.10662-1-wenchao.chen666@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume()
state") introduced a WARN() on resume from system sleep if a PHY is not
in PHY_HALTED state.
Commit 6dbe852c379f ("net: phy: Don't WARN for PHY_READY state in
mdio_bus_phy_resume()") added an exemption for PHY_READY state from
the WARN().
It turns out PHY_UP state needs to be exempted as well because the
following may happen on suspend:
mdio_bus_phy_suspend()
phy_stop_machine()
phydev->state = PHY_UP # if (phydev->state >= PHY_UP)
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/netdev/2b1a1588-505e-dff3-301d-bfc1fb14d685@samsung.com/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/8128fdb51eeebc9efbf3776a4097363a1317aaf1.1663905575.git.lukas@wunner.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit fixes DMA engine reset timeout issue in suspend/resume
with ADLink I-Pi SMARC Plus board which dmesg shows:
...
[ 54.678271] PM: suspend exit
[ 54.754066] intel-eth-pci 0000:00:1d.2 enp0s29f2: PHY [stmmac-3:01] driver [Maxlinear Ethernet GPY215B] (irq=POLL)
[ 54.755808] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-0
...
[ 54.780482] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-7
[ 55.784098] intel-eth-pci 0000:00:1d.2: Failed to reset the dma
[ 55.784111] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_hw_setup: DMA engine initialization failed
[ 55.784115] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_open: Hw setup failed
...
The issue is related with serdes which impacts clock. There is
serdes in ADLink I-Pi SMARC board ethernet controller. Please refer to
commit b9663b7ca6ff78 ("net: stmmac: Enable SERDES power up/down sequence")
for detial. When issue is reproduced, DMA engine clock is not ready
because serdes is not powered up.
To reproduce DMA engine reset timeout issue with hardware which has
serdes in GBE controller, install Ubuntu. In Ubuntu GUI, click
"Power Off/Log Out" -> "Suspend" menu, it disables network interface,
then goes to sleep mode. When it wakes up, it enables network
interface again. Stmmac driver is called in this way:
1. stmmac_release: Stop network interface. In this function, it
disables DMA engine and network interface;
2. stmmac_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into S3 or S0ix state. Some time later, system is
waken up by keyboard or mouse;
4. stmmac_resume: It does nothing because network interface has
been disabled;
5. stmmac_open: It is called to enable network interace again. DMA
engine is initialized in this API, but serdes is not power on so
there will be DMA engine reset timeout issue.
Similarly, serdes powerdown should be added in stmmac_release.
Network interface might be disabled by cmd "ifconfig eth0 down",
DMA engine, phy and mac have been disabled in ndo_stop callback,
serdes should be powered down as well. It doesn't make sense that
serdes is on while other components have been turned off.
If ethernet interface is in enabled state(netif_running(ndev) is true)
before suspend/resume, the issue couldn't be reproduced because serdes
could be powered up in stmmac_resume.
Because serdes_powerup is added in stmmac_open, it doesn't need to be
called in probe function.
Fixes: b9663b7ca6ff78 ("net: stmmac: Enable SERDES power up/down sequence")
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Tested-by: Jimmy JS Chen <jimmyjs.chen@adlinktech.com>
Tested-by: Looi, Hong Aun <hong.aun.looi@intel.com>
Link: https://lore.kernel.org/r/20220923050448.1220250-1-junxiao.chang@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as
board_ahci_mobile") added an explicit entry for AMD Green Sardine
AHCI controller using the board_ahci_mobile configuration (this
configuration has later been renamed to board_ahci_low_power).
The board_ahci_low_power configuration enables support for low power
modes.
This explicit entry takes precedence over the generic AHCI controller
entry, which does not enable support for low power modes.
Therefore, when commit 1527f69204fe ("ata: ahci: Add Green Sardine
vendor ID as board_ahci_mobile") was backported to stable kernels,
it make some Pioneer optical drives, which was working perfectly fine
before the commit was backported, stop working.
The real problem is that the Pioneer optical drives do not handle low
power modes correctly. If these optical drives would have been tested
on another AHCI controller using the board_ahci_low_power configuration,
this issue would have been detected earlier.
Unfortunately, the board_ahci_low_power configuration is only used in
less than 15% of the total AHCI controller entries, so many devices
have never been tested with an AHCI controller with low power modes.
Fixes: 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile")
Cc: stable@vger.kernel.org
Reported-by: Jaap Berkhout <j.j.berkhout@staalenberk.nl>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Dave Hansen:
- A performance fix for recent large AMD systems that avoids an ancient
cpu idle hardware workaround
- A new Intel model number. Folks like these upstream as soon as
possible so that each developer doing feature development doesn't
need to carry their own #define
- SGX fixes for a userspace crash and a rare kernel warning
* tag 'x86_urgent_for_v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ACPI: processor idle: Practically limit "Dummy wait" workaround to old Intel systems
x86/sgx: Handle VA page allocation failure for EAUG on PF.
x86/sgx: Do not fail on incomplete sanitization on premature stop of ksgxd
x86/cpu: Add CPU model numbers for Meteor Lake
|
|
Add missing pci_disable_device() if rr_init_one() fails
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20220923094320.3109154-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devm_ioremap() function returns NULL on error, it doesn't return
error pointers.
Fixes: 3a1a274e933f ("mlxbf_gige: compute MDIO period based on i1clk")
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Link: https://lore.kernel.org/r/20220923023640.116057-1-wupeng58@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The label passed to the QDESC_GET for the ETHOFLD TXQ, RXQ, and FLQ, is the
'out' one, which skips the 'out_unlock' label, and thus doesn't unlock the
'uld_mutex' before returning. Additionally, since commit 5148e5950c67
("cxgb4: add EOTID tracking and software context dump"), the access to
these ETHOFLD hardware queues should be protected by the 'mqprio_mutex'
instead.
Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support")
Fixes: 5148e5950c67 ("cxgb4: add EOTID tracking and software context dump")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Link: https://lore.kernel.org/r/20220922175109.764898-1-rafaelmendsr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently usbnet_disconnect() unanchors and frees all deferred URBs
using usb_scuttle_anchored_urbs(), which does not free urb->context,
causing a memory leak as reported by syzbot.
Use a usb_get_from_anchor() while loop instead, similar to what we did
in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in
play_deferred"). Also free urb->sg.
Reported-and-tested-by: syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com
Fixes: 69ee472f2706 ("usbnet & cdc-ether: Autosuspend for online devices")
Fixes: 638c5115a794 ("USBNET: support DMA SG")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit fe2c9c61f668cde28dac2b188028c5299cedcc1e.
On Tue, Sep 13, 2022 at 05:48:58PM +0100, Russell King (Oracle) wrote:
>What happens if this is built as a module, and the module is loaded,
>binds (and creates the directory), then is removed, and then re-
>inserted? Nothing removes the old directory, so doesn't
>debugfs_create_dir() fail, resulting in subsequent failure to add
>any subsequent debugfs entries?
>
>I don't think this patch should be backported to stable trees until
>this point is addressed.
Revert until a proper fix is available as the original behavior was
better.
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: stable@kernel.org
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: fe2c9c61f668 ("net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220923234736.657413-1-sashal@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull NVDIMM and DAX fixes from Dan Williams:
"A recently discovered one-line fix for devdax that further addresses a
v5.5 regression, and (a bit embarrassing) a small batch of fixes that
have been sitting in my fixes tree for weeks.
The older fixes have soaked in linux-next during that time and address
an fsdax infinite loop and some other minor fixups.
- Fix a infinite loop bug in fsdax
- Fix memory-type detection for devdax (EINJ regression)
- Small cleanups"
* tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
devdax: Fix soft-reservation memory description
fsdax: Fix infinite loop in dax_iomap_rw()
nvdimm/namespace: drop nested variable in create_namespace_pmem()
ndtest: Cleanup all of blk namespace specific code
pmem: fix a name collision
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C driver bugfixes for mlxbf and imx, a few documentation fixes after
the rework this cycle, and one hardening for the i2c-mux core"
* tag 'i2c-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: harden i2c_mux_alloc() against integer overflows
i2c: mlxbf: Fix frequency calculation
i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()
i2c: mlxbf: incorrect base address passed during io write
Documentation: i2c: fix references to other documents
MAINTAINERS: remove Nehal Shah from AMD MP2 I2C DRIVER
i2c: imx: If pm_runtime_get_sync() returned 1 device access is possible
|
|
Since intertouch was enabled for the T14 and P14s AMD G1 laptops there
have been a number of reports of touchpads not working well.
Debugging this with Synaptics they noted that intertouch should not be
enabled as SMBUS host notify is not available on these laptops.
Reverting the previous commit (e4ce4d3a939d97bea045eafa13ad1195695f91ce)
to restore functionality back to what it was.
Note - we are working with Synaptics to see if there is a better
solution, but nothing is confirmed as yet.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220920193936.8709-1-markpearson@lenovo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.
Currently, the driver never calls fwnode_handle_put(). This patch
adds the missing calls.
Fixes: ce1cb0eec85b ("input: keyboard: Add support for Azoteq IQS620A/621/622/624/625")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/YyYbYvlkq5cy55dc@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER),
add a minus sign to fix it.
Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.
|
|
The "hmem" platform-devices that are created to represent the
platform-advertised "Soft Reserved" memory ranges end up inserting a
resource that causes the iomem_resource tree to look like this:
340000000-43fffffff : hmem.0
340000000-43fffffff : Soft Reserved
340000000-43fffffff : dax0.0
This is because insert_resource() reparents ranges when they completely
intersect an existing range.
This matters because code that uses region_intersects() to scan for a
given IORES_DESC will only check that top-level 'hmem.0' resource and
not the 'Soft Reserved' descendant.
So, to support EINJ (via einj_error_inject()) to inject errors into
memory hosted by a dax-device, be sure to describe the memory as
IORES_DESC_SOFT_RESERVED. This is a follow-on to:
commit b13a3e5fd40b ("ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP")
...that fixed EINJ support for "Soft Reserved" ranges in the first
instance.
Fixes: 262b45ae3ab4 ("x86/efi: EFI soft reservation to E820 enumeration")
Reported-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Tested-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Omar Avelar <omar.avelar@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/166397075670.389916.7435722208896316387.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Vasily Gorbik:
- Fix potential hangs in VFIO AP driver
* tag 's390-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: bypass unnecessary processing of AP resources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an uninitialized variable usage in the operating performance
points code and add missing DT bindings for it.
Specifics:
- Fix uninitialized variable usage in dev_pm_opp_config_clks_simple()
(Christophe JAILLET)
- Add missing OPP DT properties (Rob Herring)"
* tag 'pm-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
dt-bindings: opp: Add missing (unevaluated|additional)Properties on child nodes
OPP: Fix an un-initialized variable usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.0-rc7. They include:
- phy driver reset bugfix
- fpga memleak bugfix
- counter irq config bugfix
The first two have been in linux-next for a while, the last one has
only been added to my tree in the past few days, but was in linux-next
under a different commit id. I couldn't pull directly from the counter
tree due to some gpg key propagation issue, so I took the commit
directly from email instead"
* tag 'char-misc-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: 104-quad-8: Fix skipped IRQ lines during events configuration
fpga: m10bmc-sec: Fix possible memory leak of flash_buf
phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small, and late, serial driver fixes for 6.0-rc7 to
resolve some reported problems.
Included in here are:
- tegra icount accounting fixes, including a framework function that
other drivers will be converted over to using in 6.1-rc1.
- fsl_lpuart reset bugfix
- 8250 omap 485 bugfix
- sifive serial clock bugfix
The last three patches have not shown up in linux-next due to them
being added to my tree only 2 days ago, but they are tiny and
self-contained and the developers say they resolve issues that they
have with 6.0-rc. The other three have been in linux-next for a while
with no reported issues"
* tag 'tty-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sifive: enable clocks for UART when probed
serial: 8250: omap: Use serial8250_em485_supported
serial: fsl_lpuart: Reset prior to registration
serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
serial: Create uart_xmit_advance()
|
|
Pull block fixes from Jens Axboe:
"Fix a regression that's been plaguing us by reverting the offending
commit, as attempts to both reproduce the issue and fix it in a saner
fashion have failed.
Fix for a potential oops condition in the s390 dasd block driver"
* tag 'block-6.0-2022-09-22' of git://git.kernel.dk/linux:
Revert "block: freeze the queue earlier in del_gendisk"
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
|
|
A previous patch added a wrapper function to take a lock around
efx_mcdi_filter_table_remove(), but only changed EF10 VFs' method table
to call it. Change it in the PF method table too.
Fixes: 77eb40749d73 ("sfc: move table locking into filter_table_{probe,remove} methods")
Signed-off-by: Andy Moreton <andy.moreton@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220922211218.814-1-ecree@xilinx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"These are all very simple and self-contained, although the CFI
jump-table fix touches the generic linker script as that's where the
problematic macro lives.
- Fix false positive "sleeping while atomic" warning resulting from
the kPTI rework taking a mutex too early.
- Fix possible overflow in AMU frequency calculation
- Fix incorrect shift in CMN PMU driver which causes problems with
newer versions of the IP
- Reduce alignment of the CFI jump table to avoid huge kernel images
and link errors with !4KiB page size configurations"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment
perf/arm-cmn: Add more bits to child node address offset field
arm64: topology: fix possible overflow in amu_fie_setup()
arm64: mm: don't acquire mutex when rewriting swapper
|
|
systems
Old, circa 2002 chipsets have a bug: they don't go idle when they are
supposed to. So, a workaround was added to slow the CPU down and
ensure that the CPU waits a bit for the chipset to actually go idle.
This workaround is ancient and has been in place in some form since
the original kernel ACPI implementation.
But, this workaround is very painful on modern systems. The "inl()"
can take thousands of cycles (see Link: for some more detailed
numbers and some fun kernel archaeology).
First and foremost, modern systems should not be using this code.
Typical Intel systems have not used it in over a decade because it is
horribly inferior to MWAIT-based idle.
Despite this, people do seem to be tripping over this workaround on
AMD system today.
Limit the "dummy wait" workaround to Intel systems. Keep Modern AMD
systems from tripping over the workaround. Remotely modern Intel
systems use intel_idle instead of this code and will, in practice,
remain unaffected by the dummy wait.
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/all/20220921063638.2489-1-kprateek.nayak@amd.com/
Link: https://lkml.kernel.org/r/20220922184745.3252932-1-dave.hansen@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two tiny driver core fixes for 6.0-rc7 that resolve some
oft-reported problems.
The first is a revert of the "fw_devlink.strict=1" default option that
we keep trying to enable, but we keep finding platforms that this just
breaks everything on. So again, we need it reverted and hopefully it
can be worked on in future releases.
The second is a sysfs file-size bugfix that resolves an issue that
many people are starting to hit as the fix it is fixing also was
backported to stable kernels. The util-linux developers are starting
to get bugreports about sysfs files that contain no data because of
this problem, and this fix which has been in linux-next in the
bitfield tree for a long time, resolves it. I'm submitting it here as
it needs to be merged for 6.0-final, not for 6.1-rc1.
Both of these have been in linux-next with no reported issues, only
reports were that these fixed problems"
* tag 'driver-core-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
Revert "driver core: Set fw_devlink.strict=1 by default"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes and ids from Greg KH:
"Here are a few small USB and Thunderbolt driver fixes and new device
ids for 6.0-rc7.
They contain:
- new usb-serial driver ids
- documentation build warning fix in USB hub code
- flexcop-usb long-posted bugfix (the v4l maintainer for this is MIA
so I have finally picked this up as it is a fix for a reported
problem.)
- dwc3 64bit DMA bugfix
- new thunderbolt device ids
- typec build error fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLY
media: flexcop-usb: fix endpoint type check
USB: serial: option: add Quectel RM520N
USB: serial: option: add Quectel BG95 0x0203 composition
thunderbolt: Add support for Intel Maple Ridge single port controller
usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA
USB: core: Fix RST error in hub.c
|
|
arm/fixes
Reset controller fixes for v6.0
Fix the i.MX8MP PCIe PHY PERST bit polarity, issue the Sparx5 "switch"
reset (which turned out to be a rather more global reset) early on
startup, stubbing out the reset controller driver, and fix the NPCM8XX
USB reset sequence by setting IPSRST4 bits in the correct register.
* tag 'reset-fixes-for-v6.0' of git://git.pengutronix.de/pza/linux:
reset: npcm: fix iprst2 and iprst4 setting
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
Link: https://lore.kernel.org/r/20220923143519.41735-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for an issue in the xenbus driver (initialization of
multi-page rings for Xen PV devices)"
* tag 'for-linus-6.0-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: fix xenbus_setup_ring()
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for the week, i915, mediatek, hisilicon, mgag200 and
panel have some small fixes.
amdgpu has more stack size fixes for clang build, and fixes for new
IPs, but all with low regression chances since they are for stuff new
in v6.0.
i915:
- avoid a general protection failure when using perf/OA
- avoid kernel warnings on driver release
amdgpu:
- SDMA 6.x fix
- GPUVM TF fix
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- SMU 13.x fixes
- Clang stack size fixes for recently enabled DML code
- Fix drm dirty callback change on non-atomic cases
- USB4 display fix
mediatek:
- dsi: Add atomic {destroy,duplicate}_state, reset callbacks
- dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
- Fix wrong dither settings
hisilicon:
- Depend on MMU
mgag200:
- Fix console on G200ER
panel:
- Fix innolux_g121i1_l01 bus format"
* tag 'drm-fixes-2022-09-23-1' of git://anongit.freedesktop.org/drm/drm: (30 commits)
MAINTAINERS: switch graphics to airlied other addresses
drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml314's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amdgpu: don't register a dirty callback for non-atomic
drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0
drm/amd/pm: add support for 3794 pptable for SMU13.0.0
drm/amd/display: correct num_dsc based on HW cap
drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314
drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINE
drm/amd/display: increase dcn315 pstate change latency
drm/amd/display: Fix DP MST timeslot issue when fallback happened
drm/amd/display: Display distortion after hotplug 5K tiled display
drm/amd/display: Update dummy P-state search to use DCN32 DML
drm/amd/display: skip audio setup when audio stream is enabled
drm/amd/display: update gamut remap if plane has changed
drm/amd/display: Assume an LTTPR is always present on fixed_vs links
drm/amd/display: fix dcn315 memory channel count and width read
drm/amd/display: Fix double cursor on non-video RGB MPO
drm/amd/display: Only consider pixle rate div policy for DCN32+
...
|
|
The datasheet [1] explicit describes it as requirement for a reset.
[1] MT7531 Reference Manual for Development Board rev 1.0, page 735
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the PLL init of the switch out of the pad configuration of the port
6 (usally cpu port).
Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for
outbound traffic on port 5 or port 6.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
sunxi SRAM controller fixes for
- loading/unloading
- claiming regions
- debugfs info
* tag 'sunxi-drivers-fixes-for-6.0-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
Link: https://lore.kernel.org/r/YyeN0m78+m9nNEah@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom SoCs driver fixes for 6.0, please
pull the following:
- Florian fixes a double of_node_put() in the Broadcom STB Bus Interface
Unit driver
* tag 'arm-soc/for-6.0/drivers-fixes-v2' of https://github.com/Broadcom/stblinux:
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
Link: https://lore.kernel.org/r/20220918205038.3017866-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
