summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-06-01usbnet: smsc95xx: fix link detection for disabled autonegotiationChristoph Fritz1-0/+51
To detect link status up/down for connections where autonegotiation is explicitly disabled, we don't get an irq but need to poll the status register for link up/down detection. This patch adds a workqueue to poll for link status. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recvwangyunjian1-16/+2
In function virtnet_open() and virtnet_probe(), func try_fill_recv() may be executed at the same time. VQ in virtqueue_add() has not been protected well and BUG_ON will be triggered when virito_net.ko being removed. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01bnx2x: avoid leaking memory on bnx2x_init_one() failuresVitaly Kuznetsov1-7/+10
bnx2x_init_bp() allocates memory with bnx2x_alloc_mem_bp() so if we fail later in bnx2x_init_one() we need to free this memory with bnx2x_free_mem_bp() to avoid leakages. E.g. I'm observing memory leaks reported by kmemleak when a failure (unrelated) happens in bnx2x_vfpf_acquire(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31net: fec: update dirty_tx even if no skbTroy Kisky1-5/+3
If dirty_tx isn't updated, then dma_unmap_single can be called twice. This fixes a [ 58.420980] ------------[ cut here ]------------ [ 58.425667] WARNING: CPU: 0 PID: 377 at /home/schurig/d/mkarm/linux-4.5/lib/dma-debug.c:1096 check_unmap+0x9d0/0xab8() [ 58.436405] fec 2188000.ethernet: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=66 bytes] encountered by Holger Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: <holgerschurig@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31atm: iphase: off by one in rx_pkt()Dan Carpenter1-1/+1
The iadev->rx_open[] array holds "iadev->num_vc" pointers (this code assumes that pointers are 32 bits). So the > here should be >= or else we could end up reading a garbage pointer from one element beyond the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31atm: firestream: add more reserved stringsDan Carpenter1-1/+5
This bug was there when the driver was first added in back in year 2000. It causes a Smatch warning: drivers/atm/firestream.c:849 process_incoming() error: buffer overflow 'res_strings' 60 <= 63 There are supposed to be 64 entries in this array and the missing strings are clearly in the 30 40 range. I added them as reserved 37 to reserved 40. It's possible that strings are really supposed to be added in the middle instead of at the end, but this approach is safe, in that it fixes the bug and doesn't break anything that wasn't already broken. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31vxlan: Accept user specified MTU value when create new vxlan linkChen Haiquan1-0/+3
When create a new vxlan link, example: ip link add vtap mtu 1440 type vxlan vni 1 dev eth0 The argument "mtu" has no effect, because it is not set to conf->mtu. The default value is used in vxlan_dev_configure function. This problem was introduced by commit 0dfbdf4102b9 (vxlan: Factor out device configuration). Fixes: 0dfbdf4102b9 (vxlan: Factor out device configuration) Signed-off-by: Chen Haiquan <oc@yunify.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31dma-buf: use vma_pages()Muhammad Falak R Wani1-3/+4
Replace explicit computation of vma page count by a call to vma_pages(). Also, include <linux/mm.h> Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-05-31reservation: add headerdoc commentsRob Clark1-4/+68
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-05-31Merge tag 'gpio-v4.7-2' of ↵Linus Torvalds2-58/+41
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "A bunch of GPIO fixes for the v4.7 series: - Drop the lock before reading out the GPIO direction setting in drivers supporting the .get_direction() callback: some of them may be slowpath. - Flush GPIO direction setting before locking a GPIO as an IRQ: some electronics or other poking around in the registers behind our back may have happened, so flush the direction status before trying to lock the line for use by IRQs. - Bail out silently when asked to perform operations on NULL GPIO descriptors. That is what all the get_*_optional() is about: we get optional GPIO handles, if they are not there, we get NULL. - Handle compatible ioctl() correctly: we need to convert the ioctl() pointer using compat_ptr() here like everyone else. - Disable the broken .to_irq() on the LPC32xx platform. The whole irqchip infrastructure was replaced in the last merge window, and a new implementation will be needed" * tag 'gpio-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: drop lock before reading GPIO direction gpio: bail out silently on NULL descriptors gpio: handle compatible ioctl() pointers gpio: flush direction status in gpiochip_lock_as_irq() gpio: lpc32xx: disable broken to_irq support
2016-05-31pinctrl: mediatek: fix dual-edge code defecthongkun.cao1-2/+3
When a dual-edge irq is triggered, an incorrect irq will be reported on condition that the external signal is not stable and this incorrect irq has been registered. Correct the register offset. Cc: stable@vger.kernel.org Signed-off-by: Hongkun Cao <hongkun.cao@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31drm/omap: include gpio/consumer.h where neededArnd Bergmann9-8/+6
A lot of the display drivers for OMAP use the gpio descriptor functions that are only available in linux/gpio.h if GPIOLIB is enabled and otherwise produce a build error: drivers/gpu/drm/omapdrm/displays/encoder-opa362.c: In function 'opa362_enable': drivers/gpu/drm/omapdrm/displays/encoder-opa362.c:101:3: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration] drivers/gpu/drm/omapdrm/displays/panel-dpi.c: In function 'panel_dpi_probe_pdata': drivers/gpu/drm/omapdrm/displays/panel-dpi.c:189:23: error: implicit declaration of function 'gpio_to_desc' [-Werror=implicit-function-declaration] drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c: In function 'sharp_ls_enable': drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c:120:3: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration] This replaces the existing linux/gpio.h with linux/gpio/consumer.h where needed. In case of panel-lgphilips-lb035q02.c however, we also have to include linux/gpio.h to get the definition of gpio_is_valid and gpio_set_value_cansleep that are used for the non-DT case. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [tomi.valkeinen@ti.com: resolved conflicts] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31drm/omap: include linux/seq_file.h where neededArnd Bergmann7-0/+9
The omapdrm driver relies on this header to be included implicitly, but this does not always work, and I get this error in randconfig builds: gpu/drm/omapdrm/dss/hdmi_phy.c: In function 'hdmi_phy_dump': gpu/drm/omapdrm/dss/hdmi_phy.c:34:2: error: implicit declaration of function 'seq_printf' [-Werror=implicit-function-declaration] gpu/drm/omapdrm/dss/hdmi_wp.c: In function 'hdmi_wp_dump': gpu/drm/omapdrm/dss/hdmi_wp.c:26:2: error: implicit declaration of function 'seq_printf' [-Werror=implicit-function-declaration] gpu/drm/omapdrm/dss/hdmi_pll.c: In function 'hdmi_pll_dump': gpu/drm/omapdrm/dss/hdmi_pll.c:30:2: error: implicit declaration of function 'seq_printf' [-Werror=implicit-function-declaration] This adds the #include statements in all files that have a seq_printf statement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31Revert "drm/omap: no need to select OMAP2_DSS"Peter Ujfalusi1-0/+1
This reverts commit 1c278e5e3718d15475ec08ee2135f37a6b13361c. If DRM_OMAP does not select OMAP2_DSS it is possible to build a kernel with DRM_OMAP only and not selecting OMAP2_DSS. Since omapdrm depends on OMAP2_DSS this will result on broken kernel build. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31drm/omap: Remove regulator API abusePeter Ujfalusi3-27/+0
regulator_can_change_voltage() is deprecated and it's use is not necessary as commit: 6a0028b3dd67b regulator: Deprecate regulator_can_change_voltage() describers it clearly. Also, regulator_set_voltage() is misused in the driver, as it is supposed to be used only in cases where the regulator voltage needs to be changed dynamically at runtime. In DSS's case, we always want a fixed voltage, set in the .dts files. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31OMAPDSS: HDMI5: Change DDC timingsJim Lodes2-4/+4
The DDC scl high and low times were set to the minimum values from the i2c specification, but the i2c specification takes into account the rise time and fall time to calculate the frequency. To pass HDMI certification DDC can not exceed 100kHz therefore in a system where the rise times and fall times are negligible the high and low times for scl need to be 10us. Signed-off-by: Jim Lodes <jim.lodes@garmin.com> Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31OMAPDSS: HDMI5: Fix AVI infoframeJim Lodes2-2/+2
The AVI infoframe R0-R3 in the 2nd data byte represents the Active Format Aspect Ratio. It is four bits long not two bits. This fixes that mask used to extract the bits before writing the bits to the hardware registers. Signed-off-by: Jim Lodes <jim.lodes@garmin.com> Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31drm/omap: fix OMAP4 hdmi_core_powerdown_disable()Tomi Valkeinen1-1/+1
hdmi_core_powerdown_disable() is supposed to disable HDMI core's power-down mode. However, the function sets the power-down bit to 0, which means "enable power-down". This hasn't caused any issues as the PD seems to affect only interrupts from HDMI core, and none of those interrupts are used at the moment. CEC functionality requires core interrupts, and the PD mode needs to be fixed. This patch fixes hdmi_core_powerdown_disable() to actually disable the PD mode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
2016-05-31drm/omap: Fix missing includesTomi Valkeinen6-0/+6
With certain kernel config options many omapdrm files fail to compile due to missing include of linux/gpio/consumer.h and linux/of.h. This patch adds those includes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-05-31drm/omapdrm: include pinctrl/consumer.h where neededArnd Bergmann1-0/+1
In some configurations, we can build the OMAP dss driver without implictly including the pinctrl consumer definitions, causing a build error: gpu/drm/omapdrm/dss/dss.c: In function 'dss_runtime_suspend': gpu/drm/omapdrm/dss/dss.c:1268:2: error: implicit declaration of function 'pinctrl_pm_select_sleep_state' [-Werror=implicit-function-declaration] This adds an explicit #include. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-31Merge branch 'linus' of ↵Linus Torvalds2-6/+13
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - missing selection in public_key that may result in a build failure - Potential crash in error path in omap-sham - ccp AES XTS bug that affects requests larger than 4096" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Fix AES XTS error for request sizes above 4096 crypto: public_key: select CRYPTO_AKCIPHER crypto: omap-sham - potential Oops on error in probe
2016-05-30gpio: drop lock before reading GPIO directionLinus Walleij1-2/+2
When adding the gpiochip, the GPIO HW drivers' callback get_direction() could get called in atomic context. Some of the GPIO HW drivers may sleep when accessing the register. Move the lock before initializing the descriptors. Reported-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30gpio: bail out silently on NULL descriptorsLinus Walleij1-3/+8
In fdeb8e1547cb9dd39d5d7223b33f3565cf86c28e ("gpio: reflect base and ngpio into gpio_device") assumed that GPIO descriptors are either valid or error pointers, but gpiod_get_[index_]optional() actually return NULL descriptors and then all subsequent calls should just bail out. Cc: stable@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Fixes: fdeb8e1547cb ("gpio: reflect base and ngpio into gpio_device") Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30gpio: handle compatible ioctl() pointersLinus Walleij1-2/+13
If we're using the compatible ioctl() we need to handle the argument pointer in a special way or there will be trouble. Fixes: 3c702e9987e2 ("gpio: add a userspace chardev ABI for GPIOs") Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30vfio/type1: Fix build warningAlex Williamson1-1/+1
This function cannot actually be called with npage = 0, so in practice this doesn't return an uninitialized value. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-05-30vfio/pci: Fix ordering of eventfd vs virqfd shutdownAlex Williamson1-3/+3
Both the INTx and MSI/X disable paths do an eventfd_ctx_put() for the trigger eventfd before calling vfio_virqfd_disable() any potential mask and unmask eventfds. This opens a use-after-free race where an inopportune irqfd can reference the freed signalling eventfd. Reorder to avoid this possibility. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-05-30cpufreq: intel_pstate: Downgrade print level for _PPCSrinivas Pandruvada1-1/+1
Downgrade pr_info to pr_debug for the "_PPC limits will be enforced" message. In server systems with many cores this message is annoying. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-30ACPI / Thermal / video: fix max_level incorrect valueAaron Lu2-4/+7
commit 059500940def (ACPI/video: export acpi_video_get_levels) mistakenly dropped the correct value of max_level and that caused the set_level function following failed and the acpi_video backlight interface didn't get created. Fix this by passing back the correct max_level value. While at it, also fix the param used in acpi_video_device_lcd_query_levels where acpi_handle is expected but acpi_video_device is passed. Fixes: 059500940def (ACPI/video: export acpi_video_get_levels) Reported-and-tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-30pinctrl: nomadik: fix inversion of gpio directionLinus Walleij1-1/+1
The input/output directions were inversed on the GPIO direction read function. Loose a ! and it is correct. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30gpio: flush direction status in gpiochip_lock_as_irq()Linus Walleij1-4/+17
As irqchip and gpiochip functions are orthogonal, the IRQ set-up or something else can have changed the direction of the GPIO line from what the GPIO descriptor knows when we get into gpiochip_lock_as_irq(). Make sure to re-read the direction setting if we have the .get_direction() callback enabled for the chip. Else we get problems like this: iio iio:device2: interrupts on the rising edge gpio gpiochip2: (8012e080.gpio): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ gpio gpiochip2: (8012e080.gpio): unable to lock HW IRQ 0 for IRQ genirq: Failed to request resources for l3g4200d-trigger (irq 111) on irqchip nmk1-32-63 iio iio:device2: failed to request trigger IRQ. st-gyro-i2c: probe of 2-0068 failed with error -22 Fixes: 72d320006177 ("gpio: set up initial state from .get_direction()") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30gpio: lpc32xx: disable broken to_irq supportSylvain Lemieux1-47/+1
The "to_irq" functionality is broken inside this driver since commit 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler"). The addition of the new lpc32xx irqchip driver in 4.7, fixed the lpc32xx platform interrupt issue. When switching to the new lpc32xx irqchip driver, a warning appear in the lpc32xx gpio driver: warning: "NR_IRQS" redefined. To remove this warning (temporary solution), this patch disables the broken "to_irq" mapping functionality support. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30drm/imx: plane: Don't set plane->crtc in ipu_plane_update()Liu Ying1-1/+0
Since the drm core sets plane->crtc correctly, we don't need to do that. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: ipuv3-plane: Constify ipu_plane_funcsLiu Ying1-1/+1
Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: imx-ldb: honor 'native-mode' property when selecting video mode from DTLothar Waßmann1-1/+2
This patch allows to select a specific video mode from a list of modes defined in DT by setting the 'native-mode' property appropriately. This change does not affect the behaviour of existing platforms, since they either: - have just one display-timings subnode - have the native-mode property pointing to the first entry - let the bootloader select the appropriate timing Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: parallel-display: remove dead codeLothar Waßmann1-12/+0
The 'mode_valid' flag is never set in this driver. Remove it and the code that depends on it. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: use bus_flags for pixel clock polarityPhilipp Zabel5-15/+25
This patch allows panels to set pixel clock and data enable pin polarity other than the default of driving data at the falling pixel clock edge and active high display enable. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: ipuv3-plane: enable UYVY and VYUY formatsPhilipp Zabel1-0/+2
Advertise the DRM_FORMAT_UYVY and DRM_FORMAT_VYUY formats to userspace. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: parallel-display: use of_graph_get_endpoint_by_regs helperPhilipp Zabel1-12/+12
Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: imx-ldb: use of_graph_get_endpoint_by_regs helperPhilipp Zabel1-17/+18
Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30drm/imx: imx-ldb: Add DDC supportSteve Longerbeam1-8/+34
Add support for reading EDID over Display Data Channel. If no DDC adapter is available, falls back to hardcoded EDID or display-timings node as before. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30sfc: use flow dissector helpers for aRFSEdward Cree1-54/+21
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-30net: nps_enet: Disable interrupts before napi rescheduleElad Kanfi1-1/+3
Since NAPI works by shutting down event interrupts when theres work and turning them on when theres none, the net driver must make sure that interrupts are disabled when it reschedules polling. By calling napi_reschedule, the driver switches to polling mode, therefor there should be no interrupt interference. Any received packets will be handled in nps_enet_poll by polling the HW indication of received packet until all packets are handled. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-30ptp: oops in ptp_ioctl()Dan Carpenter1-0/+1
If we pass ERR_PTR(-EFAULT) to kfree() then it's going to oops. Fixes: 2ece068e1b1d ('ptp: use memdup_user().') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29Merge tag 'scsi-fixes' of ↵Linus Torvalds5-10/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of four fixes noticed in the merge window. The aacraid one is an optimisation, the mp3sas one fixes a spurious printk, the sd_check_events one fixes a theoretical race and the failed zero length commands fixes a bug in our completion/retry routines that has been causing problems in the field" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: aacraid: do not activate events on non-SRC adapters mpt3sas: add missing curly braces sd: get disk reference in sd_check_events() scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands
2016-05-29Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-1/+9
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ...
2016-05-29Merge branch 'hash' of git://ftp.sciencehorizons.net/linuxLinus Torvalds1-0/+2
Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6ca95 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac866ea ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h>
2016-05-28Eliminate bad hash multipliers from hash_32() and hash_64()George Spelvin1-0/+2
The "simplified" prime multipliers made very bad hash functions, so get rid of them. This completes the work of 689de1d6ca. To avoid the inefficiency which was the motivation for the "simplified" multipliers, hash_64() on 32-bit systems is changed to use a different algorithm. It makes two calls to hash_32() instead. drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32 for some horrible reason, so it inherits a copy of the old definition. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Antti Palosaari <crope@iki.fi> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
2016-05-28Merge branch 'i2c/for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "A fix for a regression introduced yesterday. The regression didn't show up here locally because I did not have PAGE_POISONING enabled. And buildbots discovered this only after it hit your tree. Thanks to Dan for the quick response" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: use after free in detach
2016-05-28Merge tag 'chrome-platform' of ↵Linus Torvalds8-15/+230
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform Pull chrome platform updates from Olof Johansson "A handful of Chrome driver and binding changes this merge window: - a few patches to fix probing and configuration of pstore - a few patches adding Elan touchpad registration on a few devices - EC changes: a security fix dealing with max message sizes and addition of compat_ioctl support. - keyboard backlight control support There was also an accidential duplicate registration of trackpads on 'Leon', which was reverted just recently" * tag 'chrome-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: Revert "platform/chrome: chromeos_laptop: Add Leon Touch" platform/chrome: chromeos_laptop - Add Elan touchpad for Wolf platform/chrome: chromeos_laptop - Add elan trackpad option for C720 platform/chrome: cros_ec_dev - Populate compat_ioctl platform/chrome: cros_ec_lightbar - use name instead of ID to hide lightbar attributes platform/chrome: cros_ec_dev - Fix security issue platform/chrome: Add Chrome OS keyboard backlight LEDs support platform/chrome: use to_platform_device() platform/chrome: pstore: Move to larger record size. platform/chrome: pstore: probe for ramoops buffer using acpi platform/chrome: chromeos_laptop: Add Leon Touch
2016-05-28Merge tag 'sound-4.7-rc1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound updates from Takashi Iwai: "This is the second update round for 4.7-rc1. Most of changes are about the pending ASoC updates and fixes, including a few new drivers. Below are some highlights: ASoC: - New drivers for MAX98371 and TAS5720 - SPI support for TLV320AIC32x4, along with the module split - TDM support for STI Uniperf IPs - Remaining topology API fixes / updates HDA: - A couple of Dell quirks and new Realtek codec support" * tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits) ALSA: hda - Fix headset mic detection problem for one Dell machine spi: spi-ep93xx: Fix the PTR_ERR() argument ALSA: hda/realtek - Add support for ALC295/ALC3254 ASoC: kirkwood: fix build failure ALSA: hda - Fix headphone noise on Dell XPS 13 9360 ASoC: ak4642: Enable cache usage to fix crashes on resume ASoC: twl6040: Disconnect AUX output pads on digital mute ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers rcar: src: skip disabled-SRC nodes ASoC: max98371 Remove duplicate entry in max98371_reg ASoC: twl6040: Select LPPLL during standby ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS ASoC: simple-card: Add pm callbacks to platform driver ASoC: pxa: Fix module autoload for platform drivers ASoC: topology: Fix memory leak in widget creation ASoC: Add max98371 codec driver ASoC: rsnd: count .probe/.remove for rsnd_mod_call() ASoC: topology: Check size mismatch of ABI objects before parsing ASoC: topology: Check failure to create a widget ASoC: add support for TAS5720 digital amplifier ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-09 01:28:11 +0300