summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-05-11ath10k: drop fragments with multicast DA for PCIeWen Gong1-3/+20
Fragmentation is not used with multicast frames. Discard unexpected fragments with multicast DA. This fixes CVE-2020-26145. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Cc: stable@vger.kernel.org Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20210511200110.5a0bd289bda8.Idd6ebea20038fb1cfee6de924aa595e5647c9eae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-11ath10k: add CCMP PN replay protection for fragmented frames for PCIeWen Gong2-4/+96
PN replay check for not fragmented frames is finished in the firmware, but this was not done for fragmented frames when ath10k is used with QCA6174/QCA6377 PCIe. mac80211 has the function ieee80211_rx_h_defragment() for PN replay check for fragmented frames, but this does not get checked with QCA6174 due to the ieee80211_has_protected() condition not matching the cleared Protected bit case. Validate the PN of received fragmented frames within ath10k when CCMP is used and drop the fragment if the PN is not correct (incremented by exactly one from the previous fragment). This applies only for QCA6174/QCA6377 PCIe. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Cc: stable@vger.kernel.org Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20210511200110.9ba2664866a4.I756e47b67e210dba69966d989c4711ffc02dc6bc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-11nvmet: demote fabrics cmd parse err msg to debugChaitanya Kulkarni1-3/+3
Host can send invalid commands and flood the target with error messages. Demote the error message from pr_err() to pr_debug() in nvmet_parse_fabrics_cmd() and nvmet_parse_connect_cmd(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-11nvmet: use helper to remove the duplicate codeChaitanya Kulkarni1-5/+2
Use the helper nvmet_report_invalid_opcode() to report invalid opcode so we can remove the duplicate code. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-11nvmet: demote discovery cmd parse err msg to debugChaitanya Kulkarni1-1/+1
Host can send invalid commands and flood the target with error messages for the discovery controller. Demote the error message from pr_err() to pr_debug( in nvmet_parse_discovery_cmd().  Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-11nvmet-rdma: Fix NULL deref when SEND is completed with errorMichal Kalderon1-2/+2
When running some traffic and taking down the link on peer, a retry counter exceeded error is received. This leads to nvmet_rdma_error_comp which tried accessing the cq_context to obtain the queue. The cq_context is no longer valid after the fix to use shared CQ mechanism and should be obtained similar to how it is obtained in other functions from the wc->qp. [ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12). [ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 905.839919] PGD 0 P4D 0 [ 905.842464] Oops: 0000 1 SMP NOPTI [ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1 [ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma] [ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff [ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246 [ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000 [ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000 [ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074 [ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010 [ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400 [ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000 [ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12). [ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0 [ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 905.961857] PKRU: 55555554 [ 906.010315] Call Trace: [ 906.012778] __ib_process_cq+0x89/0x170 [ib_core] [ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core] [ 906.022152] process_one_work+0x1a7/0x360 [ 906.026182] ? create_worker+0x1a0/0x1a0 [ 906.030123] worker_thread+0x30/0x390 [ 906.033802] ? create_worker+0x1a0/0x1a0 [ 906.037744] kthread+0x116/0x130 [ 906.040988] ? kthread_flush_work_fn+0x10/0x10 [ 906.045456] ret_from_fork+0x1f/0x40 Fixes: ca0f1a8055be2 ("nvmet-rdma: use new shared CQ mechanism") Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-11nvmet: fix inline bio check for passthruChaitanya Kulkarni1-1/+1
When handling passthru commands, for inline bio allocation we only consider the transfer size. This works well when req->sg_cnt fits into the req->inline_bvec, but it will result in the early return from bio_add_hw_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC. Consider an I/O of size 32768 and first buffer is not aligned to the page boundary, then I/O is split in following manner :- [ 2206.256140] nvmet: sg->length 3440 sg->offset 656 [ 2206.256144] nvmet: sg->length 4096 sg->offset 0 [ 2206.256148] nvmet: sg->length 4096 sg->offset 0 [ 2206.256152] nvmet: sg->length 4096 sg->offset 0 [ 2206.256155] nvmet: sg->length 4096 sg->offset 0 [ 2206.256159] nvmet: sg->length 4096 sg->offset 0 [ 2206.256163] nvmet: sg->length 4096 sg->offset 0 [ 2206.256166] nvmet: sg->length 4096 sg->offset 0 [ 2206.256170] nvmet: sg->length 656 sg->offset 0 Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8). This will result in early return in the following code path :- nvmet_bdev_execute_rw() bio_add_pc_page() bio_add_hw_page() if (bio_full(bio, len)) return 0; Use previously introduced helper nvmet_use_inline_bvec() to consider req->sg_cnt when using inline bio. This only affects nvme-loop transport. Fixes: dab3902b19a0 ("nvmet: use inline bio for passthru fast path") Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-11nvmet: fix inline bio check for bdev-nsChaitanya Kulkarni2-1/+7
When handling rw commands, for inline bio case we only consider transfer size. This works well when req->sg_cnt fits into the req->inline_bvec, but it will result in the warning in __bio_add_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC. Consider an I/O size 32768 and first page is not aligned to the page boundary, then I/O is split in following manner :- [ 2206.256140] nvmet: sg->length 3440 sg->offset 656 [ 2206.256144] nvmet: sg->length 4096 sg->offset 0 [ 2206.256148] nvmet: sg->length 4096 sg->offset 0 [ 2206.256152] nvmet: sg->length 4096 sg->offset 0 [ 2206.256155] nvmet: sg->length 4096 sg->offset 0 [ 2206.256159] nvmet: sg->length 4096 sg->offset 0 [ 2206.256163] nvmet: sg->length 4096 sg->offset 0 [ 2206.256166] nvmet: sg->length 4096 sg->offset 0 [ 2206.256170] nvmet: sg->length 656 sg->offset 0 Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8). This will result in the following warning message :- nvmet_bdev_execute_rw() bio_add_page() __bio_add_page() WARN_ON_ONCE(bio_full(bio, len)); This scenario is very hard to reproduce on the nvme-loop transport only with rw commands issued with the passthru IOCTL interface from the host application and the data buffer is allocated with the malloc() and not the posix_memalign(). Fixes: 73383adfad24 ("nvmet: don't split large I/Os unconditionally") Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-11nvme-multipath: fix double initialization of ANA stateChristoph Hellwig3-29/+37
nvme_init_identify and thus nvme_mpath_init can be called multiple times and thus must not overwrite potentially initialized or in-use fields. Split out a helper for the basic initialization when the controller is initialized and make sure the init_identify path does not blindly change in-use data structures. Fixes: 0d0b660f214d ("nvme: add ANA support") Reported-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de>
2021-05-11Merge tag 'iio-fixes-5.13a' of ↵Greg Kroah-Hartman14-22/+25
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 5.13 cycle A couple of high priority core fixes and the usual bits scattered across individual drivers. core: * Fix ioctl handler double free. * Fix an accidental ABI change wrt to error codes when an IOCTL is not supported. gp2ap002: * Runtime pm imbalance on error. hid-sensors: * Fix a Kconfig dependency issue in a particularly crazy config. mpu3050: * Fix wrong temperature calculation due to a type needing to be signed. pulsedlight: * Runtime pm imbalance on error. tsl2583 * Fix a potential division by zero. * tag 'iio-fixes-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: tsl2583: Fix division by a zero lux_val iio: core: return ENODEV if ioctl is unknown iio: core: fix ioctl handlers removal iio: gyro: mpu3050: Fix reported temperature value iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER iio: proximity: pulsedlight: Fix rumtime PM imbalance on error iio: light: gp2ap002: Fix rumtime PM imbalance on error
2021-05-11drm/i915/dp: Use slow and wide link training for everythingKai-Heng Feng1-54/+5
Screen flickers on Innolux eDP 1.3 panel when clock rate 540000 is in use. According to the panel vendor, though clock rate 540000 is advertised, but the max clock rate it really supports is 270000. Ville Syrjälä mentioned that fast and narrow also breaks some eDP 1.4 panel, so use slow and wide training for all panels to resolve the issue. User also confirmed that the new strategy doesn't introduce any regression on XPS 9380. v2: - Use slow and wide for everything. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3384 References: https://gitlab.freedesktop.org/drm/intel/-/issues/272 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421052054.1434718-1-kai.heng.feng@canonical.com (cherry picked from commit acca7762eb71bc05a8f28d29320d193150051f79) Fixes: 2bbd6dba84d4 ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure") Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-11platform/x86: hp_accel: Avoid invoking _INI to speed up resumeKai-Heng Feng2-1/+22
hp_accel can take almost two seconds to resume on some HP laptops. The bottleneck is on evaluating _INI, which is only needed to run once. Resolve the issue by only invoking _INI when it's necessary. Namely, on probe and on hibernation restore. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Éric Piel <eric.piel@trempplin-utc.net> Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-11platform/x86: ideapad-laptop: fix method name typoBarnabás Pőcze1-5/+5
"smbc" should be "sbmc". `eval_smbc()` incorrectly called the SMBC ACPI method instead of SBMC. This resulted in partial loss of functionality. Rectify that by calling the correct ACPI method (SBMC), and also rename methods and constants. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212985 Fixes: 0b765671cb80 ("platform/x86: ideapad-laptop: group and separate (un)related constants into enums") Fixes: ff36b0d953dc ("platform/x86: ideapad-laptop: rework and create new ACPI helpers") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20210507235333.286505-1-pobrn@protonmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-11platform/x86: ideapad-laptop: fix a NULL pointer dereferenceQiu Wenbo1-1/+2
The third parameter of dytc_cql_command should not be NULL since it will be dereferenced immediately. Fixes: ff36b0d953dc4 ("platform/x86: ideapad-laptop: rework and create new ACPI helpers") Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn> Acked-by: Ike Panhc <ike.pan@canonical.com> Link: https://lore.kernel.org/r/20210428050636.8003-1-qiuwenbo@kylinos.com.cn Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-11Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard6019-158346/+400127
Start this new release drm-misc-fixes branch Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-05-11clk: Skip clk provider registration when np is NULLTudor Ambarus1-0/+9
commit 6579c8d97ad7 ("clk: Mark fwnodes when their clock provider is added") revealed that clk/bcm/clk-raspberrypi.c driver calls devm_of_clk_add_hw_provider(), with a NULL dev->of_node, which resulted in a NULL pointer dereference in of_clk_add_hw_provider() when calling fwnode_dev_initialized(). Returning 0 is reducing the if conditions in driver code and is being consistent with the CONFIG_OF=n inline stub that returns 0 when CONFIG_OF is disabled. The downside is that drivers will maybe register clkdev lookups when they don't need to and waste some memory. Fixes: 6579c8d97ad7 ("clk: Mark fwnodes when their clock provider is added") Fixes: 3c9ea42802a1 ("clk: Mark fwnodes when their clock provider is added/removed") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210426065618.588144-1-tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-11usb: cdnsp: Fix lack of removing request from pending list.Pawel Laszczak1-7/+7
Patch fixes lack of removing request from ep->pending_list on failure of the stop endpoint command. Driver even after failing this command must remove request from ep->pending_list. Without this fix driver can stuck in cdnsp_gadget_ep_disable function in loop: while (!list_empty(&pep->pending_list)) { preq = next_request(&pep->pending_list); cdnsp_ep_dequeue(pep, preq); } Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20210420042813.34917-1-pawell@gli-login.cadence.com Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-05-11usb: cdns3: Fix runtime PM imbalance on errorDinghao Liu1-1/+3
When cdns3_gadget_start() fails, a pairing PM usage counter decrement is needed to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20210412054908.7975-1-dinghao.liu@zju.edu.cn Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-05-11interconnect: qcom: Add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-05-11interconnect: qcom: bcm-voter: add a missing of_node_put()Subbaraman Narayanamurthy1-1/+2
Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak. Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1619116570-13308-1-git-send-email-subbaram@codeaurora.org Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-05-11net: dsa: felix: re-enable TAS guard band modeMichael Walle1-5/+10
Commit 316bcffe4479 ("net: dsa: felix: disable always guard band bit for TAS config") disabled the guard band and broke 802.3Qbv compliance. There are two issues here: (1) Without the guard band the end of the scheduling window could be overrun by a frame in transit. (2) Frames that don't fit into a configured window will still be sent. The reason for both issues is that the switch will schedule the _start_ of a frame transmission inside the predefined window without taking the length of the frame into account. Thus, we'll need the guard band which will close the gate early, so that a complete frame can still be sent. Revert the commit and add a note. For a lengthy discussion see [1]. [1] https://lore.kernel.org/netdev/c7618025da6723418c56a54fe4683bd7@walle.cc/ Fixes: 316bcffe4479 ("net: dsa: felix: disable always guard band bit for TAS config") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11net/mlx4: Fix EEPROM dump supportVladyslav Tarasiuk2-7/+104
Fix SFP and QSFP* EEPROM queries by setting i2c_address, offset and page number correctly. For SFP set the following params: - I2C address for offsets 0-255 is 0x50. For 256-511 - 0x51. - Page number is zero. - Offset is 0-255. At the same time, QSFP* parameters are different: - I2C address is always 0x50. - Page number is not limited to zero. - Offset is 0-255 for page zero and 128-255 for others. To set parameters accordingly to cable used, implement function to query module ID and implement respective helper functions to set parameters correctly. Fixes: 135dd9594f12 ("net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11net: netcp: Fix an error messageChristophe JAILLET1-2/+2
'ret' is known to be 0 here. The expected error code is stored in 'tx_pipe->dma_queue', so use it instead. While at it, switch from %d to %pe which is more user friendly. Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10PM: runtime: Fix unpaired parent child_count for force_resumeTony Lindgren1-3/+7
As pm_runtime_need_not_resume() relies also on usage_count, it can return a different value in pm_runtime_force_suspend() compared to when called in pm_runtime_force_resume(). Different return values can happen if anything calls PM runtime functions in between, and causes the parent child_count to increase on every resume. So far I've seen the issue only for omapdrm that does complicated things with PM runtime calls during system suspend for legacy reasons: omap_atomic_commit_tail() for omapdrm.0 dispc_runtime_get() wakes up 58000000.dss as it's the dispc parent dispc_runtime_resume() rpm_resume() increases parent child_count dispc_runtime_put() won't idle, PM runtime suspend blocked pm_runtime_force_suspend() for 58000000.dss, !pm_runtime_need_not_resume() __update_runtime_status() system suspended pm_runtime_force_resume() for 58000000.dss, pm_runtime_need_not_resume() pm_runtime_enable() only called because of pm_runtime_need_not_resume() omap_atomic_commit_tail() for omapdrm.0 dispc_runtime_get() wakes up 58000000.dss as it's the dispc parent dispc_runtime_resume() rpm_resume() increases parent child_count dispc_runtime_put() won't idle, PM runtime suspend blocked ... rpm_suspend for 58000000.dss but parent child_count is now unbalanced Let's fix the issue by adding a flag for needs_force_resume and use it in pm_runtime_force_resume() instead of pm_runtime_need_not_resume(). Additionally omapdrm system suspend could be simplified later on to avoid lots of unnecessary PM runtime calls and the complexity it adds. The driver can just use internal functions that are shared between the PM runtime and system suspend related functions. Fixes: 4918e1f87c5f ("PM / runtime: Rework pm_runtime_force_suspend/resume()") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-10RDMA/core: Prevent divide-by-zero error triggered by the userLeon Romanovsky1-0/+3
The user_entry_size is supplied by the user and later used as a denominator to calculate number of entries. The zero supplied by the user will trigger the following divide-by-zero error: divide error: 0000 [#1] SMP KASAN PTI CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b RSP: 0018:ffff88810416f828 EFLAGS: 00010246 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0 FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0 ib_uverbs_cmd_verbs+0x1546/0x1940 ib_uverbs_ioctl+0x186/0x240 __x64_sys_ioctl+0x38a/0x1220 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space") Link: https://lore.kernel.org/r/b971cc70a8b240a8b5eda33c99fa0558a0071be2.1620657876.git.leonro@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-10RDMA/siw: Release xarray entryLeon Romanovsky1-1/+1
The xarray entry is allocated in siw_qp_add(), but release was missed in case zero-sized SQ was discovered. Fixes: 661f385961f0 ("RDMA/siw: Fix handling of zero-sized Read and Receive Queues.") Link: https://lore.kernel.org/r/f070b59d5a1114d5a4e830346755c2b3f141cde5.1620560472.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-10RDMA/siw: Properly check send and receive CQ pointersLeon Romanovsky1-6/+3
The check for the NULL of pointer received from container_of() is incorrect by definition as it points to some offset from NULL. Change such check with proper NULL check of SIW QP attributes. Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Link: https://lore.kernel.org/r/a7535a82925f6f4c1f062abaa294f3ae6e54bdd2.1620560310.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-10ACPI: scan: Fix a memory leak in an error handling pathChristophe JAILLET1-0/+1
If 'acpi_device_set_name()' fails, we must free 'acpi_device_bus_id->bus_id' or there is a (potential) memory leak. Fixes: eb50aaf960e3 ("ACPI: scan: Use unique number for instance_no") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-10mtd: parsers: ofpart: fix parsing subpartitionsRafał Miłecki1-12/+14
ofpart was recently patched to not scan random partition nodes as subpartitions. That change unfortunately broke scanning valid subpartitions like: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { compatible = "fixed-partitions"; label = "bootloader"; reg = <0x0 0x100000>; partition@0 { label = "config"; reg = <0x80000 0x80000>; }; }; }; Fix that regression by adding 1 more code path. We actually need 3 conditional blocks to support 3 possible cases. This change also makes code easier to understand & follow. Reported-by: David Bauer <mail@david-bauer.net> Fixes: 2d751203aacf ("mtd: parsers: ofpart: limit parsing of deprecated DT syntax Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Andrew Cameron <apcameron@softhome.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210508173214.28365-1-zajec5@gmail.com
2021-05-10mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helperMiquel Raynal1-2/+3
Since the Hamming software ECC engine has been updated to become a proper and independent ECC engine, it is now mandatory to either initialize the engine before using any one of his functions or use one of the bare helpers which only perform the calculations. As there is no actual need for a proper ECC initialization, let's just use the bare helper instead of the rawnand one. Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210413161840.345208-8-miquel.raynal@bootlin.com
2021-05-10mtd: rawnand: tmio: Fix external use of SW Hamming ECC helperMiquel Raynal1-3/+5
Since the Hamming software ECC engine has been updated to become a proper and independent ECC engine, it is now mandatory to either initialize the engine before using any one of his functions or use one of the bare helpers which only perform the calculations. As there is no actual need for a proper ECC initialization, let's just use the bare helper instead of the rawnand one. Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210413161840.345208-7-miquel.raynal@bootlin.com
2021-05-10mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helperMiquel Raynal1-1/+11
Since the Hamming software ECC engine has been updated to become a proper and independent ECC engine, it is now mandatory to either initialize the engine before using any one of his functions or use one of the bare helpers which only perform the calculations. As there is no actual need for a proper ECC initialization, let's just use the bare helper instead of the rawnand one. Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210413161840.345208-6-miquel.raynal@bootlin.com
2021-05-10mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helperMiquel Raynal1-1/+11
Since the Hamming software ECC engine has been updated to become a proper and independent ECC engine, it is now mandatory to either initialize the engine before using any one of his functions or use one of the bare helpers which only perform the calculations. As there is no actual need for a proper ECC initialization, let's just use the bare helper instead of the rawnand one. Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210413161840.345208-5-miquel.raynal@bootlin.com
2021-05-10mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helperMiquel Raynal1-1/+14
Since the Hamming software ECC engine has been updated to become a proper and independent ECC engine, it is now mandatory to either initialize the engine before using any one of his functions or use one of the bare helpers which only perform the calculations. As there is no actual need for a proper ECC initialization, let's just use the bare helper instead of the rawnand one. Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions") Cc: stable@vger.kernel.org Cc: Vladimir Zapolskiy <vz@mleia.com> Reported-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://lore.kernel.org/linux-mtd/20210413161840.345208-4-miquel.raynal@bootlin.com
2021-05-10mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helperMiquel Raynal1-1/+11
Since the Hamming software ECC engine has been updated to become a proper and independent ECC engine, it is now mandatory to either initialize the engine before using any one of his functions or use one of the bare helpers which only perform the calculations. As there is no actual need for a proper ECC initialization, let's just use the bare helper instead of the rawnand one. Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210413161840.345208-3-miquel.raynal@bootlin.com
2021-05-10mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helperMiquel Raynal1-1/+11
Since the Hamming software ECC engine has been updated to become a proper and independent ECC engine, it is now mandatory to either initialize the engine before using any one of his functions or use one of the bare helpers which only perform the calculations. As there is no actual need for a proper ECC initialization, let's just use the bare helper instead of the rawnand one. Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210413161840.345208-2-miquel.raynal@bootlin.com
2021-05-10dm snapshot: fix a crash when an origin has no snapshotsMikulas Patocka1-3/+2
If an origin target has no snapshots, o->split_boundary is set to 0. This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split(). Fix this by initializing chunk_size, and in turn split_boundary, to rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits into "unsigned" type. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-10hwmon: (ltc2992) Put fwnode in error case during ->probe()Andy Shevchenko1-2/+6
In each iteration fwnode_for_each_available_child_node() bumps a reference counting of a loop variable followed by dropping in on a next iteration, Since in error case the loop is broken, we have to drop a reference count by ourselves. Do it for port_fwnode in error case during ->probe(). Fixes: b0bd407e94b0 ("hwmon: (ltc2992) Add support") Cc: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210510100136.3303142-1-andy.shevchenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10Merge tag 'misc-habanalabs-fixes-2021-05-08' of ↵Greg Kroah-Hartman9-124/+123
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-linus Oded writes: This tag contains the following fixes for 5.13-rc2: - Expose PLL information per ASIC. This also fixes some casting warnings. - Skip reading further firmware errors in case PCI link is down. - Security firmware error should be handled as error and not warning. - Allow user to ignore firmware errors. - Fix bug in timeout calculation when waiting for interrupt of CS. - Fix bug of potential use-after-free. * tag 'misc-habanalabs-fixes-2021-05-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: habanalabs/gaudi: Fix a potential use after free in gaudi_memset_device_memory habanalabs: wait for interrupt wrong timeout calculation habanalabs: ignore f/w status error habanalabs: change error level of security not ready habanalabs: skip reading f/w errors on bad status habanalabs: expose ASIC specific PLL index
2021-05-10usb: typec: tcpm: Don't block probing of consumers of "connector" nodesSaravana Kannan2-1/+11
fw_devlink expects DT device nodes with "compatible" property to have struct devices created for them. Since the connector node might not be populated as a device, mark it as such so that fw_devlink knows not to wait on this fwnode being populated as a struct device. Without this patch, USB functionality can be broken on some boards. Fixes: f7514a663016 ("of: property: fw_devlink: Add support for remote-endpoint") Reported-by: John Stultz <john.stultz@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210506004423.345199-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: musb: Fix an error messageChristophe JAILLET1-1/+1
'ret' is known to be 0 here. Initialize 'ret' with the expected error code before using it. Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/69f514dc7134e3c917cad208e73cc650cb9e2bd6.1620159879.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMSKyle Tso1-2/+12
Not_Supported Message is acceptable in VDM AMS. Redirect the VDM state machine to VDM_STATE_DONE when receiving Not_Supported and finish the VDM AMS. Also, after the loop in vdm_state_machine_work, add more conditions of VDM states to clear the vdm_sm_running flag because those are all stopping states when leaving the loop. In addition, finish the VDM AMS if the port partner responds BUSY. Fixes: 8dea75e11380 ("usb: typec: tcpm: Protocol Error handling") Fixes: 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210507062300.1945009-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated workKyle Tso1-10/+75
In current design, DISCOVER_IDENTITY is queued to VDM state machine immediately in Ready states and never retries if it fails in the AMS. Move the process to a delayed work so that when it fails for some reasons (e.g. Sink Tx No Go), it can be retried by queueing the work again. Also fix a problem that the vdm_state is not set to a proper state if it is blocked by Collision Avoidance mechanism. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210507062300.1945009-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4Jack Pham2-11/+36
commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") introduced retrieval of the PDOs when connected to a PD-capable source. But only the first 4 PDOs are received since that is the maximum number that can be fetched at a time given the MESSAGE_IN length limitation (16 bytes). However, as per the PD spec a connected source may advertise up to a maximum of 7 PDOs. If such a source is connected it's possible the PPM could have negotiated a power contract with one of the PDOs at index greater than 4, and would be reflected in the request data object's (RDO) object position field. This would result in an out-of-bounds access when the rdo_index() is used to index into the src_pdos array in ucsi_psy_get_voltage_now(). With the help of the UBSAN -fsanitize=array-bounds checker enabled this exact issue is revealed when connecting to a PD source adapter that advertise 5 PDOs and the PPM enters a contract having selected the 5th one. [ 151.545106][ T70] Unexpected kernel BRK exception at EL1 [ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP ... [ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c [ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328 ... [ 151.545542][ T70] Call trace: [ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c [ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0 [ 151.545550][ T70] dev_uevent+0x200/0x384 [ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8 [ 151.545557][ T70] power_supply_changed_work+0x174/0x31c [ 151.545562][ T70] process_one_work+0x244/0x6f0 [ 151.545564][ T70] worker_thread+0x3e0/0xa64 We can resolve this by instead retrieving and storing up to the maximum of 7 PDOs in the con->src_pdos array. This would involve two calls to the GET_PDOS command. Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class") Fixes: 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") Cc: stable@vger.kernel.org Reported-and-tested-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210503074611.30973-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encodingVáclav Kubernát1-2/+25
I didn't properly test the driver for YH-5151E, so it was completely broken. Firstly, the log/real mapping was incorrect in one case. Secondly, PMBus specifies that output voltages should be in the linear16 encoding. However, the YH-5151E is non-compliant and uses linear11. YM-2151E isn't affected by this. Fix this by converting the values inside the read functions. linear16 gets the exponent from the VOUT_MODE command. The device doesn't support it, so I have to manually supply the value for it. Both supported devices have now been tested to report correct vout values. Fixes: 1734b4135a62 ("hwmon: Add driver for fsp-3y PSUs and PDUs") Signed-off-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210429075337.110502-1-kubernat@cesnet.cz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10hwmon: (occ) Fix poll rate limitingEddie James2-3/+4
The poll rate limiter time was initialized at zero. This breaks the comparison in time_after if jiffies is large. Switch to storing the next update time rather than the previous time, and initialize the time when the device is probed. Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions") Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210429151336.18980-1-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10hwmon: (corsair-psu) Remove unneeded semicolonsWan Jiabing1-2/+2
Fix the following coccicheck warning: ./drivers/hwmon/corsair-psu.c:379:2-3: Unneeded semicolon Remove unneeded semicolons. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20210427044219.7799-1-wanjiabing@vivo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLEGeert Uytterhoeven1-1/+1
The Apple Interrupt Controller is only present on Apple Silicon SoCs. Hence add a dependency on ARCH_APPLE, to prevent asking the user about this driver when configuring a kernel without Apple Silicon SoC support. Drop the default, as ARCH_APPLE already selects APPLE_AIC. Fixes: 76cde26394114f6a ("irqchip/apple-aic: Add support for the Apple Interrupt Controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/f37e8daea37d50651d2164b0b3dad90780188548.1618316398.git.geert+renesas@glider.be
2021-05-10usb: fotg210-hcd: Fix an error messageChristophe JAILLET1-2/+2
'retval' is known to be -ENODEV here. This is a hard-coded default error code which is not useful in the error message. Moreover, another error message is printed at the end of the error handling path. The corresponding error code (-ENOMEM) is more informative. So remove simplify the first error message. While at it, also remove the useless initialization of 'retval'. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc3: omap: improve extcon initializationMarcel Hamer1-0/+5
When extcon is used in combination with dwc3, it is assumed that the dwc3 registers are untouched and as such are only configured if VBUS is valid or ID is tied to ground. In case VBUS is not valid or ID is floating, the registers are not configured as such during driver initialization, causing a wrong default state during boot. If the registers are not in a default state, because they are for instance touched by a boot loader, this can cause for a kernel error. Signed-off-by: Marcel Hamer <marcel@solidxs.se> Link: https://lore.kernel.org/r/20210427122118.1948340-1-marcel@solidxs.se Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 11:15:37 +0300