summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-05-16iwlwifi: support explicit monitor interfaceJohannes Berg3-1/+6
Support explicit monitor interface to keep injection working after the HW queue changes. This also finally enables sniffer mode. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16iwlwifi: invert the order of ssid list in scan cmdDavid Spinadel1-1/+5
The firmware inverts the order of ssid list of scan command, we should invert the order before sending the command, in order to get probe requests sent in wanted order. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16iwlwifi: disable default wildcard ssid scanDavid Spinadel2-11/+24
iwl_fill_probe_request has used to add a wildcard ssid IE to any probe request template, now it's disabled and it will send wildcard ssid only for full scan. Instead, the highest priority ssid is set to the template. Due to adding high priority SSID to the template, it reduce IE len, but since we had only 260 bytes for IEs before changing allocation size to be dynamic, now we should have a bit more room for IEs. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16iwlwifi: fix scan_cmd_size allocationDavid Spinadel2-6/+12
Allocate scan command with dynamic size based on uCode capability and num of channels. This isn't an important fix as the previous allocation was always too large as it added the scan command size but later subtracted it (which meant it was supposed to be part of the max scan size.) Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16rt2x00:Add RT539b chipset supportZero.Lin1-0/+1
Signed-off-by: Zero.Lin <Zero.Lin@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb: add PCI IDs 0x4322 and 43222Hauke Mehrtens1-0/+2
The 0x4322 ID is found on the BCM4322 used on some SoCs like the Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID is found on the BCM43222 used on some other SoCs like the D-Link DSL-2760U connected to a BCM63xx. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: delete IEs when stop_apAvinash Patil3-0/+75
Delete custom IEs set by start_ap cfg80211 handler when stop_ap handler is called for AP interface. IE index required for deletion is stored in mwifiex_private structure. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: retrieve IEs from cfg80211_beacon_data and send to firmwareAvinash Patil5-0/+195
This patch adds logic for setting tail beacon IE, probe response IE and assoc response IE from cfg80211_ap_settings parameter of start_ap handler into FW. RSN IE is also retrieved from tail IE buffer and sent to firmware. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add custom IE frameworkAvinash Patil8-1/+201
1. support for setting custom IE from application hostapd etc. Custom IE addition using auto-indexing and Custom IE deletion using static indices (which are allocated during IE addition and stored in driver) are supported. 2. Separate file for handling IE related execution. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: rearrange AP sys configure codeAvinash Patil3-21/+48
This patch takes into account AP config_type (bss config/custom ie config) while preparing AP sys_configure command buffer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add WPA2 support for APAvinash Patil5-0/+268
1. Support for parsing security related parameters from cfg80211_ap_settings in start_ap cfg80211 handler 2. Conversion of these security information into FW understandle TLVs and setting into FW thru sys_config command 3. key management is done on host. This ensures that FW forwards EAPOL key packets to host instead of processing on its own. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add AP event handling frameworkAvinash Patil4-2/+73
Added logic to handle AP event that are generated by the firmware. As MLME/SME is implemented in the firmware, events such as station association and deauthentication, must be sent to userspace (hostapd) for creating and deleting station database. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add cfg80211 start_ap and stop_ap handlersAvinash Patil5-0/+139
1. add start AP and stop AP handlers 2. support for parsing ssid, beacon period, DTIM period from beacon_parameters structure and setting it to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: common set_wiphy_params cfg80211 handler for AP and STA interfaceAvinash Patil6-20/+150
Add support for setting fragmentation threshold, RTS threshold and retry limit. Since wiphy parameters are properties of physical device, appropriate function to set phy parameters is invoked depending upon bss_type(STA or AP) for each virtual interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: handle interface type changes correctlyAvinash Patil1-18/+46
mlan0: managed or ibss The iftype can be changed from STATION to ADHOC, and vice versa. uap0: AP only The iftype cannot be changed. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: stop BSS in deauthentication handlingAvinash Patil1-0/+4
While in AP mode, we should stop BSS in deauthentication handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add AP command sys_config and set channelAvinash Patil5-1/+90
1. support for AP sys_config command and added parsing of channel information. 2. support for setting AP channel from cfg80211 set_channel handler Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: add bss start and bss stop commands for APAvinash Patil6-2/+75
1. separate file for preparing uAP command buffer 2. definition of bss_start and bss_stop commands being sent to firmware Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: append peer mac address TLV in key material command to firmwareAvinash Patil5-9/+46
Modify key related cfg80211 handlers to copy peer mac address for pairwise keys. If peer mac address is not present or group keys, it will be sent as broadcast mac address. This would be required since hostapd downloads per peer PTK. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: save adapter pointer in wiphy_privAvinash Patil3-25/+27
Since wiphy structure is per adapter we would save adapter, instead of mwifiex private pointer, in wiphy_priv. Also move country_info from mwifiex_private to mwifiex_adapter as making it part of mwifiex_adapter looks logical. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: multi-interface support for mwifiexAvinash Patil1-0/+20
mwifiex supports STA and AP interfaces which use same phy. Indicate this to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: support for creation of AP interfaceAvinash Patil4-66/+98
1. wiphy structure is per device; hence moved it to mwifiex_adapter mwifiex_register_cfg80211 takes mwifiex_adapter as parameter. This function only registers wiphy with cfg80211. 2. Creation of interfaces is moved to cfg80211 add_virtual_interface handler. 3. Create 2 interfaces by default: station and AP Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: handle station specific commands on STA interface onlyAvinash Patil2-20/+34
Commands like IBSS coalescing status, power save, 11D should be handled only when bss_type is STA. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mwifiex: allocate space for one more mwifiex_private structureAvinash Patil3-16/+23
Reserve space for one more priv structure. This will be used by AP interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16b43: use pci_is_pcie() instead of obsolete pci_dev.is_pcieBjorn Helgaas1-1/+1
Use pci_is_pcie() instead of looking at obsolete is_pcie field in struct pci_dev. CC: Stefano Brivio <stefano.brivio@polimi.it> CC: b43-dev@lists.infradead.org CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: Add flush for BCMA_RESET_CTL writeNathan Hintz1-0/+1
Adds a missing read to flush the previous write (per the Broadcom SDK). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: Add __devexit to bcma_host_pci_removeNathan Hintz1-2/+2
Add missing __devexit attribute to bcma_host_pci_remove. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: reads/writes are always 4 bytes, so always map 4 bytesNathan Hintz1-3/+3
Modify ioremap_nocache calls to reflect the number of bytes read/written. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: Account for variable PCI memory base/sizeNathan Hintz1-2/+2
PCI Memory Resource start address and size are variable, dependent on the H/W configuration. Modify the computation of io_map_base to use the computed values. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: Find names of non BCM coresNathan Hintz1-14/+40
bcma_device_name only provides names for Broadcom cores. Modify logic to provide names for MIPS and ARM cores as well. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: handle non pci in ai_deviceremoved()Hauke Mehrtens1-0/+3
This is based on code from the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: read PCI vendor and device id only for PCI devicesHauke Mehrtens1-6/+17
If brcmsmac is used on non PCI(s) devices it should not try to access bus->host_pci. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: do not access host_pciHauke Mehrtens1-5/+5
The irq number is copied from the PCIe host device to the bcma cores so just request it using the bcma core device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove nicpci.cHauke Mehrtens6-330/+0
There is no code doing anything useful in nicpci.c anymore, so remove it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcicore_fixcfg()Hauke Mehrtens5-37/+0
This is now done in bcma by bcma_core_pci_fixcfg(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcie_extendL1timer()Hauke Mehrtens2-75/+3
This is now done by calling bcma_core_pci_extend_L1time() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcicore_find_pci_capability()Hauke Mehrtens2-66/+0
This function is now unreferenced Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcicore_attach()Hauke Mehrtens3-155/+0
This is already done by bcma in bcma_pcicore_serdes_workaround(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove _ai_clkctl_cc()Hauke Mehrtens3-59/+31
This is now done by calling bcma_core_set_clockmode() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove ai_gpiocontrol()Hauke Mehrtens4-13/+2
This is now done by calling bcma_chipco_gpio_control(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove ai_chipcontrl_epa4331Hauke Mehrtens2-25/+0
ai_chipcontrl_epa4331 is not referenced by any method in brcmsmac and the functionality is already in bcma_chipco_bcm4331_ext_pa_lines_ctl in drivers/bcma/driver_chipcommon_pmu.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove ai_pci_setup()Hauke Mehrtens3-29/+2
This is now done by calling bcma_core_pci_irq_ctl() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcicore_hwup()Hauke Mehrtens3-32/+0
This is now done by bcma_core_pci_config_fixup() in drivers/bcma/driver_pci.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove PCIe functions needed for PCIe core rev <= 10Hauke Mehrtens5-256/+9
The devices I know of are not using a PCIe core with rev <= 10. The BCM4718 uses a PCIe core with revision 14 and the BCM43224 uses a PCIe core with revision 15. This patch removes support for old PCIe core versions, which are not found on devices supported by brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove references to PCIHauke Mehrtens5-161/+6
There are no devices which are using bcma and have a PCI bus, just a PCIe bus or something else. bcma does not support PCI devices, so lets also remove PCI support from brcmsmac. All devices currently supported by brcmsmac are PCIe based. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove support for cc rev < 20Hauke Mehrtens2-99/+11
The lowest chip common version used on bcma based devices is 31 on the bcm4718 and 32 on the bcm4313, bcm43224, and bcm43225, so the support for the old versions could be removed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: get board and chip info from bcmaHauke Mehrtens1-35/+5
bcma now provide this data and brcmsmac should get it from there and not parse it by its self. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove brcmsmac own sprom parsingHauke Mehrtens10-1749/+0
brcmsmac now takes the sprom from bcma and do not uses its own sprom parsing any more. Remove this code as it is not used any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: use sprom from bcmaHauke Mehrtens8-323/+179
bcma now provides all sprom attributes needed by brcmsmac and also parses them from the pci sprom ant otp. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: add bcma_core_pci_config_fixup()Hauke Mehrtens1-0/+18
This code is based on code from pcie_misc_config_fixup() in brcmsmac. This patch is part of the move of pci specific code from brcmsmac to bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-06 12:29:37 +0300