summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-04-21crypto: ccp: Detect and reject "invalid" addresses destined for PSPSean Christopherson1-0/+3
Explicitly reject using pointers that are not virt_to_phys() friendly as the source for SEV commands that are sent to the PSP. The PSP works with physical addresses, and __pa()/virt_to_phys() will not return the correct address in these cases, e.g. for a vmalloc'd pointer. At best, the bogus address will cause the command to fail, and at worst lead to system instability. While it's unlikely that callers will deliberately use a bad pointer for SEV buffers, a caller can easily use a vmalloc'd pointer unknowingly when running with CONFIG_VMAP_STACK=y as it's not obvious that putting the command buffers on the stack would be bad. The command buffers are relative small and easily fit on the stack, and the APIs to do not document that the incoming pointer must be a physically contiguous, __pa() friendly pointer. Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Fixes: 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210406224952.4177376-3-seanjc@google.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-21crypto: ccp: Free SEV device if SEV init failsSean Christopherson1-1/+3
Free the SEV device if later initialization fails. The memory isn't technically leaked as it's tracked in the top-level device's devres list, but unless the top-level device is removed, the memory won't be freed and is effectively leaked. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210406224952.4177376-2-seanjc@google.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-21KVM: SVM: Add support for KVM_SEV_SEND_CANCEL commandSteve Rutherford1-0/+1
After completion of SEND_START, but before SEND_FINISH, the source VMM can issue the SEND_CANCEL command to stop a migration. This is necessary so that a cancelled migration can restart with a new target later. Reviewed-by: Nathan Tempelman <natet@google.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Steve Rutherford <srutherford@google.com> Message-Id: <20210412194408.2458827-1-srutherford@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-21drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefishJiansong Chen1-1/+1
dimgrey_cavefish has similar gc_10_3 ip with sienna_cichlid, so follow its registers offset setting. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21amd/display: allow non-linear multi-planar formatsSimon Ser1-7/+4
Accept non-linear buffers which use a multi-planar format, as long as they don't use DCC. Tested on GFX9 with NV12. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21ataflop: fix off by one in ataflop_probe()Dan Carpenter1-1/+4
Smatch complains that the "type > NUM_DISK_MINORS" should be >= instead of >. We also need to subtract one from "type" at the start. Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-21ataflop: potential out of bounds in do_format()Dan Carpenter1-6/+5
The function uses "type" as an array index: q = unit[drive].disk[type]->queue; Unfortunately the bounds check on "type" isn't done until later in the function. Fix this by moving the bounds check to the start. Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-21drm/amd/display: Update modifier list for gfx10_3Qingqing Zhuo1-2/+2
[Why] Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B is used instead by userspace. [How] Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B for modifiers with DCC supported. Fixes: faa37f54ce0462 ("drm/amd/display: Expose modifiers") Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21drm/amdgpu: reserve fence slot to update page tablePhilip Yang1-2/+8
Forgot to reserve a fence slot to use sdma to update page table, cause below kernel BUG backtrace to handle vm retry fault while application is exiting. [ 133.048143] kernel BUG at /home/yangp/git/compute_staging/kernel/drivers/dma-buf/dma-resv.c:281! [ 133.048487] Workqueue: events amdgpu_irq_handle_ih1 [amdgpu] [ 133.048506] RIP: 0010:dma_resv_add_shared_fence+0x204/0x280 [ 133.048672] amdgpu_vm_sdma_commit+0x134/0x220 [amdgpu] [ 133.048788] amdgpu_vm_bo_update_range+0x220/0x250 [amdgpu] [ 133.048905] amdgpu_vm_handle_fault+0x202/0x370 [amdgpu] [ 133.049031] gmc_v9_0_process_interrupt+0x1ab/0x310 [amdgpu] [ 133.049165] ? kgd2kfd_interrupt+0x9a/0x180 [amdgpu] [ 133.049289] ? amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049408] amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049534] amdgpu_ih_process+0x9b/0x1c0 [amdgpu] [ 133.049657] amdgpu_irq_handle_ih1+0x21/0x60 [amdgpu] [ 133.049669] process_one_work+0x29f/0x640 [ 133.049678] worker_thread+0x39/0x3f0 [ 133.049685] ? process_one_work+0x640/0x640 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.11.x
2021-04-21spi: fsi: add a missing of_node_putChristophe JAILLET1-1/+3
'for_each_available_child_of_node' performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/504e431b900341249d331b868d90312cf41f415a.1618947919.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21spi: Make error handling of gpiod_count() call cleanerAndy Shevchenko1-6/+7
Each time we call spi_get_gpio_descs() the num_chipselect is overwritten either by new value or by the old one. This is an extra operation in case gpiod_count() returns an error. Besides that it slashes the error handling of gpiod_count(). Refactor the code to make error handling of gpiod_count() call cleaner. Note, that gpiod_count() never returns 0, take this into account as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420164040.40055-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: core.c: Improve a commentSebastian Fricke1-1/+4
s/regulator may on/regulator may already be enabled/ s/or left on/or was left on/ The aim of this patch is to make the comment more readable and to make it clear, that this is about a regulator, that is already enabled instead of a regulator that may be switched on. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Link: https://lore.kernel.org/r/20210421055236.13148-1-sebastian.fricke@posteo.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: Avoid a double 'of_node_get' in 'regulator_of_get_init_node()'Christophe JAILLET1-1/+5
'for_each_available_child_of_node()' already performs an 'of_node_get()' on child, so there is no need to perform another one before returning. Otherwise, a double 'get' is performed and a resource may never be released. Fixes: 925c85e21ed8 ("regulator: Factor out location of init data OF node") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/a79f0068812b89ff412d572a1171f22109c24132.1618947049.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: core.c: Fix indentation of commentShubhankar Kuranagatti1-7/+14
Shifted the closing */ of multiline comment to a new line This is done to maintain code uniformity Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210420034718.t7wudu6xcfpahflv@kewl-virtual-machine Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: s2mps11: Drop initialization via platform dataKrzysztof Kozlowski1-20/+2
None of the platforms with S2MPS11 use board files, so any initialization via platform data can be safely removed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420170244.13467-5-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: s2mpa01: Drop initialization via platform dataKrzysztof Kozlowski1-4/+0
None of the platforms with S2MPA01 use board files, so any initialization via platform data can be safely removed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420170244.13467-4-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21regulator: da9121: automotive variants identity fixAdam Ward2-28/+65
This patch fixes identification of DA913x parts by the DA9121 driver, where a lack of clarity lead to implementation on the basis that variant IDs were to be identical to the equivalent rated non-automotive parts. There is a new emphasis on the DT identity to cope with overlap in these ID's - this is not considered to be problematic, because projects would be exclusively using automotive or consumer grade parts. Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/20210421120306.DB5B880007F@slsrvapps-01.diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21gpio: omap: Save and restore sysconfigTony Lindgren1-0/+9
As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-04-21platform/x86: intel_pmc_core: add ACPI dependencyArnd Bergmann1-0/+1
The driver now fails to build without ACPI: drivers/platform/x86/intel_pmc_core.c: In function 'pmc_core_get_tgl_lpm_reqs': drivers/platform/x86/intel_pmc_core.c:617:41: error: invalid use of undefined type 'struct acpi_device' 617 | out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid, 0, This could probably be made optional, but it won't be used without ACPI in practice, so just add a Kconfig dependency. Fixes: 428131364f00 ("platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210421134957.3329062-1-arnd@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-21drm/ttm: Don't count pages in SG BOs against pages_limitFelix Kuehling1-9/+18
Pages in SG BOs were not allocated by TTM. So don't count them against TTM's pages limit. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210414064804.29356-9-Felix.Kuehling@amd.com
2021-04-21drm/ttm: fix return value checkChristian König1-1/+1
The function returns the number of swapped pages here. Only abort when we get a negative error code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-1-christian.koenig@amd.com
2021-04-21of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addressesLeonardo Bras1-1/+4
Many other resource flag parsers already add this flag when the input has bits 24 & 25 set, so update this one to do the same. Some devices (like virtio-net) have more than one memory resource (like MMIO32 and MMIO64) and without this flag it would be needed to verify the address range to know which one is which. Signed-off-by: Leonardo Bras <leobras.c@gmail.com> Link: https://lore.kernel.org/r/20210415180050.373791-1-leobras.c@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2021-04-21thermal/drivers/ti-soc-thermal/bandgap Remove unused variable 'val'Lin Ruizhe1-4/+0
The function ti_bandgap_restore_ctxt() restores the context at resume time. It checks if the sensor has a counter, reads the register but does nothing with the value. The block was probably omitted by the commit b87ea759a4cc. Remove the unused variable as well as the block using it as we can consider it as dead code. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b87ea759a4cc ("staging: omap-thermal: fix context restore function") Signed-off-by: Lin Ruizhe <linruizhe@huawei.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210421084256.57591-1-linruizhe@huawei.com
2021-04-21s390/zcrypt: fix zcard and zqueue hot-unplug memleakHarald Freudenberger2-0/+2
Tests with kvm and a kmemdebug kernel showed, that on hot unplug the zcard and zqueue structs for the unplugged card or queue are not properly freed because of a mismatch with get/put for the embedded kref counter. This fix now adjusts the handling of the kref counters. With init the kref counter starts with 1. This initial value needs to drop to zero with the unregister of the card or queue to trigger the release and free the object. Fixes: 29c2680fd2bf ("s390/ap: fix ap devices reference counting") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Cc: stable@vger.kernel.org Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-21mt76: mt7921: do not use 0 as NULL pointerLorenzo Bianconi1-1/+1
Fix the following sparse warning: drivers/net/wireless/mediatek/mt76/mt7921/mac.c:1425:70: warning: Using plain integer as NULL pointer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21Merge tag 'gvt-next-fixes-2021-04-21' of https://github.com/intel/gvt-linux ↵Jani Nikula3-15/+4
into drm-intel-next-fixes gvt-next-fixes-2021-04-21 - Remove one unused function warning (Jiapeng) - Fix intel_gvt_init_device() return type (Dan) - Remove one duplicated register accessible check (Zhenyu) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421094522.GU1551@zhen-hp.sh.intel.com
2021-04-21mt76: mt7915: directly read per-rate tx power from registersShayne Chen2-22/+51
Since driver no longer handler per-rate tx power setting, we need to read the power values directly from registers. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: rework the flow of txpower settingShayne Chen8-251/+99
Clean up the flow of per-rate txpower limit setting to get rid of duplicate work since it has already been handled by firmware, and set proper max_power based on different channels and regdomains. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: add support for DT rate power limitsShayne Chen1-6/+38
Enable to limit per-rate max txpower from DT. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: abort uncompleted scan by wifi resetSean Wang1-0/+8
Scan abort should be required for the uncompleted hardware scan interrupted by wifi reset. Otherwise, it is possible that the scan request after wifi reset gets error code -EBUSY from mac80211 and then blocks the reconnectting to the access point. Fixes: 0c1ce9884607 ("mt76: mt7921: add wifi reset support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21drm/i915/gvt: Remove duplicated register accessible checkZhenyu Wang1-5/+0
Looks this duplication was missed in code rebase. Remove extra check. Cc: Yan Zhao <yan.y.zhao@intel.com> Fixes: 02dd2b12a685 ("drm/i915/gvt: unify lri cmd handler and mmio handlers") Reviewed-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210414084813.3763353-2-zhenyuw@linux.intel.com
2021-04-21drivers: hv: Create a consistent pattern for checking Hyper-V hypercall statusJoseph Salisbury2-2/+2
There is not a consistent pattern for checking Hyper-V hypercall status. Existing code uses a number of variants. The variants work, but a consistent pattern would improve the readability of the code, and be more conformant to what the Hyper-V TLFS says about hypercall status. Implemented new helper functions hv_result(), hv_result_success(), and hv_repcomp(). Changed the places where hv_do_hypercall() and related variants are used to use the helper functions. Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-21mt76: mt7921: add wifisys reset support in debugfsSean Wang1-8/+17
Introduce chip_reset knob in mt7921 debugfs to export a way to users able to trigger wifi reset, and group the similar operations previously defined in chip_config in the same knob. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutexLorenzo Bianconi1-1/+4
Wake the chip before configuring the mcu log level Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: improve mcu error loggingLorenzo Bianconi5-10/+8
Dump mcu command code in hex and related prefix to help debugging Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: move hw configuration in mt7921_register_deviceLorenzo Bianconi2-13/+6
Get rid of init work since firmware loading is already performed in mt7921_init_hardware Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: add support for applying pre-calibration dataRyder Lee9-10/+199
When the EEPROM data is read from flash, it can contain pre-calibration data, which can save calibration time. Note that group_cal can save 30% bootup calibration time, and dpd_cal can save 75% channel switching time. Tested-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: load ROM patch before checking patch semaphore statusFelix Fietkau1-14/+16
For MT7663, the availability of the patch files is used to detect, which corresponding firmware is going to be used (AP firmware or STA offload firmware). If the ROM patch was already applied, it could attempt to load the wrong firmware (without considering the alternative). Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix entering driver-own state on mt7663Felix Fietkau1-2/+10
Fixes hardware wakeup issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix hardware error recovery for mt7663Felix Fietkau5-11/+53
MT7663 uses different bits for communicating reset commands/status between MCU and host. Also add an extra initial reset command. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add dumping Tx power tableSean Wang5-0/+151
Dump the tx power table saved in offload firmware. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: introduce single-sku support for mt7663/mt7921Lorenzo Bianconi6-1/+170
Introduce support for rate-txpower compensation for mt7663/mt7921 chipsets. Rate-txpower limit is specified through dts Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: do not use mt7615 single-sku values for mt7663Lorenzo Bianconi1-0/+5
mt7663 mcu relies on different APIs to configure APIs per-rate power limit respect to mt7615 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: implement support for using DT rate power limitsFelix Fietkau2-2/+69
Limits are used to update the channel max_power settings and also passed to the firmware on channel changes Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: extend DT rate power limits to support 11ax devicesShayne Chen2-23/+40
Enable parsing per-rate txpower limits from DT for 11ax chipsets. Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: add functions for parsing rate power limits from DTFelix Fietkau2-0/+216
This subnode can be used to set per-rate tx power limits either per country code / regdomain or globally. These limits are typically provided by the device manufacturers and are used to limit sideband emissions and stay within regulatory limits Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: flush tx status queue on DMA resetFelix Fietkau5-0/+10
After DMA reset, tx status information for queued frames will never arrive. Flush the queue to free skbs immediately instead of waiting for a timeout Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add mt7921_dma_cleanup in mt7921_unregister_deviceLorenzo Bianconi1-1/+2
In order to avoid memory leaks, clean the dma engine unloading the module Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put()Ryder Lee1-2/+6
We should use ieee80211_free_txskb() to report skb status avoid wrong aql accounting after reset. Cc: stable@vger.kernel.org Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: only free skbs after mt7615_dma_reset() when reset happensRyder Lee1-3/+3
In mt7615_mac_reset_work(), make sure freeing skbs after mt7615_dma_reset(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 18:13:54 +0300