| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace DATA_PAGES_PER_BLK and DATA_BLOCK_SIZE with new struct elements
tcmu_dev->data_pages_per_blk and tcmu_dev->data_blk_size. These new
variables are still loaded with constant definition DATA_PAGES_PER_BLK_DEF
(= 1) and DATA_PAGES_PER_BLK_DEF * PAGE_SIZE.
There is no way yet to set the values via configfs.
Link: https://lore.kernel.org/r/20210324195758.2021-6-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is only one caller of tcmu_get_block_page left. Since it is a
one-liner, we can remove the function.
Link: https://lore.kernel.org/r/20210324195758.2021-5-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Change tcmu to support DATA_BLOCK_SIZE being a multiple of PAGE_SIZE. There
are two reasons why one would like to have a bigger DATA_BLOCK_SIZE:
1) If userspace - e.g. due to data compression, encryption or
deduplication - needs to have receive or transmit data in a consecutive
buffer, we can define DATA_BLOCK_SIZE to the maximum size of a SCSI
READ/WRITE to enforce that userspace sees just one consecutive
buffer. That way we can avoid the need for doing data copy in
userspace.
2) Using a bigger data block size can speed up command processing in
tcmu. The number of free data blocks to look up in bitmap is reduced
substantially. The lookup for data pages in radix_tree can be done more
efficiently if there are multiple pages in a data block. The maximum
number of IOVs to set up is lower so cmd entries in the ring become
smaller.
Link: https://lore.kernel.org/r/20210324195758.2021-4-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename some variables and definitions as a first preparation for
DATA_BLOCK_SIZE != PAGE_SIZE and add the new DATA_PAGES_PER_BLK definition
containing the number of pages per data block.
Rename tcmu_try_get_block_page() to tcmu_try_get_data_page(). Keep name
tcmu_get_block_page() since it will go away in a following commit when
there is only one caller left. Subsequent commits will then add full
support for DATA_PAGES_PER_BLK != 1, which also means DATA_BLOCK_SIZE =
DATA_PAGES_PER_BLK * PAGE_SIZE
Link: https://lore.kernel.org/r/20210324195758.2021-3-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some definitions and members of struct tcmu_dev had misleading
names. Examples:
- ring_size was used for the size of mailbox + cmd ring + data area
- CMDR_SIZE was used for size of mailbox + cmd ring
I added the new definition MB_CMDR_SIZE (mailbox + command ring), changed
CMDR_SIZE to hold the size of the command ring only and replaced in struct
tcmu_dev the member ring_size with mmap_pages, because the member is now
used in tcmu_mmap() only, where we need page count, not size.
I also added the new struct tcmu_dev member 'cmdr' which is used to replace
some occurences of '(void *)mb + CMDR_OFF' with 'udev->cmdr' for better
readability.
Link: https://lore.kernel.org/r/20210324195758.2021-2-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Vendor listed for mediatek in kernel vendor file 'vendor-prefixes.yaml'
contains 'mediatek' as a valid vendor string. Some nodes in the device
tree are using an invalid vendor string vfor 'mtk' instead. Fix all of
them in dts file. Update also ralink mt7621 related code to properly
match new strings. Even there are used in the device tree there are
some strings that are not referred anywhere but have been also updated
with new vendor name. These are 'mtk,mt7621-wdt', 'mtk,mt7621-nand',
'mtk,mt7621-mc', and 'mtk,mt7621-cpc'.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-4-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Clocks for SoC mt7621 have been properly integrated so there is
no need to declare fixed clocks at all in the device tree. Remove
all of them, add new device tree nodes for mt7621-clk and update
the rest of the nodes to use them.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-3-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The documentation for this SOC only talks about two
registers regarding to the clocks:
* SYSC_REG_CPLL_CLKCFG0 - provides some information about
boostrapped refclock. PLL and dividers used for CPU and some
sort of BUS.
* SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable
clocks for all or some ip cores.
Looking into driver code, and some openWRT patched there are
another frequencies which are used in some drivers (uart, sd...).
According to all of this information the clock plan for this
SoC is set as follows:
- Main top clock "xtal" from where all the rest of the world is
derived.
- CPU clock "cpu" derived from "xtal" frequencies and a bunch of
register reads and predividers.
- BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz.
- Fixed clocks from "xtal":
* "50m": 50 MHz.
* "125m": 125 MHz.
* "150m": 150 MHz.
* "250m": 250 MHz.
* "270m": 270 MHz.
We also have a buch of gate clocks with their parents:
* "hsdma": "150m"
* "fe": "250m"
* "sp_divtx": "270m"
* "timer": "50m"
* "pcm": "270m"
* "pio": "50m"
* "gdma": "bus"
* "nand": "125m"
* "i2c": "50m"
* "i2s": "270m"
* "spi": "bus"
* "uart1": "50m"
* "uart2": "50m"
* "uart3": "50m"
* "eth": "50m"
* "pcie0": "125m"
* "pcie1": "125m"
* "pcie2": "125m"
* "crypto": "250m"
* "shxc": "50m"
With this information the clk driver will provide clock and gates
functionality from a a set of hardcoded clocks allowing to define
a nice device tree without fixed clocks.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-2-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of num_parents that is an int type.
There is a potential infinite loop if num_parents is larger than
the u8 loop counter. Fix this by making the loop counter the same
type as num_parents. Also make num_parents an unsigned int to
match the return type of the call to clk_hw_get_num_parents.
Addresses-Coverity: ("Infinite loop")
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Resolve a couple of conflicts between the 5.12 fixes branch and the
5.13 staging tree (iSCSI target and UFS).
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The IPA core clock is required for SDX55. Define it.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210409134407.841137-1-elder@linaro.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
A session can be removed dynamically by sysfs interface "remove_path" that
eventually calls rtrs_clt_remove_path_from_sysfs function. The current
rtrs_clt_remove_path_from_sysfs first removes the sysfs interfaces and
frees sess->stats object. Second it removes the session from the active
list.
Therefore some functions could access non-connected session and access the
freed sess->stats object even-if they check the session status before
accessing the session.
For instance rtrs_clt_request and get_next_path_min_inflight check the
session status and try to send IO to the session. The session status
could be changed when they are trying to send IO but they could not catch
the change and update the statistics information in sess->stats object,
and generate use-after-free problem.
(see: "RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its
stats")
This patch changes the rtrs_clt_remove_path_from_sysfs to remove the
session from the active session list and then destroy the sysfs
interfaces.
Each function still should check the session status because closing or
error recovery paths can change the status.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210412084002.33582-1-gi-oh.kim@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: db7683d7deb2 ("IB/srpt: Fix login-related race conditions")
Link: https://lore.kernel.org/r/20210408113132.87250-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduce the ability for kernel ULPs to adjust the minimum RNR Retry
timer. The INIT -> RTR transition executed by RDMA CM will be used for
this adjustment. This avoids an additional ib_modify_qp() call.
rdma_set_min_rnr_timer() must be called before the call to rdma_connect()
on the active side and before the call to rdma_accept() on the passive
side.
The default value of RNR Retry timer is zero, which translates to 655
ms. When the receiver is not ready to accept a send messages, it encodes
the RNR Retry timer value in the NAK. The requestor will then wait at
least the specified time value before retrying the send.
The 5-bit value to be supplied to the rdma_set_min_rnr_timer() is
documented in IBTA Table 45: "Encoding for RNR NAK Timer Field".
Link: https://lore.kernel.org/r/1617216194-12890-2-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature
sensor reading"), Linux reports the temperature of Topaz hwmon as
constant -75°C.
This is because switches from the Topaz family (88E6141 / 88E6341) have
the address of the temperature sensor register different from Peridot.
This address is instead compatible with 88E1510 PHYs, as was used for
Topaz before the above mentioned commit.
Create a new mapping table between switch family and PHY ID for families
which don't have a model number. And define PHY IDs for Topaz and Peridot
families.
Create a new PHY ID and a new PHY driver for Topaz's internal PHY.
The only difference from Peridot's PHY driver is the HWMON probing
method.
Prior this change Topaz's internal PHY is detected by kernel as:
PHY [...] driver [Marvell 88E6390] (irq=63)
And afterwards as:
PHY [...] driver [Marvell 88E6341 Family] (irq=63)
Signed-off-by: Pali Rohár <pali@kernel.org>
BugLink: https://github.com/globalscaletechnologies/linux/issues/1
Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading")
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce rcu section in mt7921_mcu_tx_rate_report before dereferencing
wcid pointer otherwise loockdep will report the following issue:
[ 115.245740] =============================
[ 115.245754] WARNING: suspicious RCU usage
[ 115.245771] 5.10.20 #0 Not tainted
[ 115.245784] -----------------------------
[ 115.245816] other info that might help us debug this:
[ 115.245830] rcu_scheduler_active = 2, debug_locks = 1
[ 115.245845] 3 locks held by kworker/u4:1/20:
[ 115.245858] #0: ffffff80065ab138 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x1f8/0x6b8
[ 115.245948] #1: ffffffc01198bdd8 ((work_completion)(&(&dev->mphy.mac_work)->work)){+.+.}-{0:0}, at: process_one_8
[ 115.246027] #2: ffffff8006543ce8 (&dev->mutex#2){+.+.}-{3:3}, at: mt7921_mac_work+0x60/0x2b0 [mt7921e]
[ 115.246125]
[ 115.246125] stack backtrace:
[ 115.246142] CPU: 1 PID: 20 Comm: kworker/u4:1 Not tainted 5.10.20 #0
[ 115.246152] Hardware name: MediaTek MT7622 RFB1 board (DT)
[ 115.246168] Workqueue: phy0 mt7921_mac_work [mt7921e]
[ 115.246188] Call trace:
[ 115.246201] dump_backtrace+0x0/0x1a8
[ 115.246213] show_stack+0x14/0x30
[ 115.246228] dump_stack+0xec/0x134
[ 115.246240] lockdep_rcu_suspicious+0xcc/0xdc
[ 115.246255] mt7921_get_wtbl_info+0x2a4/0x310 [mt7921e]
[ 115.246269] mt7921_mac_work+0x284/0x2b0 [mt7921e]
[ 115.246281] process_one_work+0x2a0/0x6b8
[ 115.246293] worker_thread+0x40/0x440
[ 115.246305] kthread+0x144/0x148
[ 115.246317] ret_from_fork+0x10/0x18
Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
For devices that use a programmable clock for the AVB reference clock,
the driver may need to enable them. Add code to find the optional clock
and enable it when available.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Report trace event related to MCU_EVENT_LP_INFO that is sent by the mcu
when it is ready to enter in deep sleep state
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Ensures that header translation is disabled for interfaces that do not support
it.
Fixes: d4b98c63d7a7 ("mt76: mt7615: add support for rx decapsulation offload")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Resolve the following checkpatch.pl script warning:
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add mmio.c in order to use mt76_bus_ops throughout the driver.
It will be also shared with the future APSoC revision.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Frame reception timestamp (low 32-bits) that indicates the value of the
local TSF timer value at the time the first bit of the MAC header in the
received frame (PPDU unit) arriving at the MAC.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This mode is not supported by the hardware
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
With buf uninitialized in mt76_dma_tx_queue_skb_raw, its field skip_unmap
could potentially inherit a non-zero value from stack garbage.
If this happens, it will cause DMA mappings for MCU command frames to not be
unmapped after completion
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reduce the data latency during hw_scan by the split scan which would switch
back to operational channel right after scanning each channel done.
Suggested-by: Asda Wen <Asda.Wen@mediatek.com>
Suggested-by: Soul Huang <Soul.Huang@mediatek.com>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix the second insert module causing the device hangs after remove module.
Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix kernel crash when the firmware is missing or fails to download.
[ 9.444758] kernel BUG at drivers/pci/msi.c:375!
[ 9.449363] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 9.501033] pstate: a0400009 (NzCv daif +PAN -UAO)
[ 9.505814] pc : free_msi_irqs+0x180/0x184
[ 9.509897] lr : free_msi_irqs+0x40/0x184
[ 9.513893] sp : ffffffc015193870
[ 9.517194] x29: ffffffc015193870 x28: 00000000f0e94fa2
[ 9.522492] x27: 0000000000000acd x26: 000000000000009a
[ 9.527790] x25: ffffffc0152cee58 x24: ffffffdbb383e0d8
[ 9.533087] x23: ffffffdbb38628d0 x22: 0000000000040200
[ 9.538384] x21: ffffff8cf7de7318 x20: ffffff8cd65a2480
[ 9.543681] x19: ffffff8cf7de7000 x18: 0000000000000000
[ 9.548979] x17: ffffff8cf9ca03b4 x16: ffffffdc13ad9a34
[ 9.554277] x15: 0000000000000000 x14: 0000000000080800
[ 9.559575] x13: ffffff8cd65a2980 x12: 0000000000000000
[ 9.564873] x11: ffffff8cfa45d820 x10: ffffff8cfa45d6d0
[ 9.570171] x9 : 0000000000000040 x8 : ffffff8ccef1b780
[ 9.575469] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000
[ 9.580766] x5 : ffffffdc13824900 x4 : ffffff8ccefe0000
[ 9.586063] x3 : 0000000000000000 x2 : 0000000000000000
[ 9.591362] x1 : 0000000000000125 x0 : ffffff8ccefe0000
[ 9.596660] Call trace:
[ 9.599095] free_msi_irqs+0x180/0x184
[ 9.602831] pci_disable_msi+0x100/0x130
[ 9.606740] pci_free_irq_vectors+0x24/0x30
[ 9.610915] mt7921_pci_probe+0xbc/0x250 [mt7921e]
[ 9.615693] pci_device_probe+0xd4/0x14c
[ 9.619604] really_probe+0x134/0x2ec
[ 9.623252] driver_probe_device+0x64/0xfc
[ 9.627335] device_driver_attach+0x4c/0x6c
[ 9.631506] __driver_attach+0xac/0xc0
[ 9.635243] bus_for_each_dev+0x8c/0xd4
[ 9.639066] driver_attach+0x2c/0x38
[ 9.642628] bus_add_driver+0xfc/0x1d0
[ 9.646365] driver_register+0x64/0xf8
[ 9.650101] __pci_register_driver+0x6c/0x7c
[ 9.654360] init_module+0x28/0xfdc [mt7921e]
[ 9.658704] do_one_initcall+0x13c/0x2d0
[ 9.662615] do_init_module+0x58/0x1e8
[ 9.666351] load_module+0xd80/0xeb4
[ 9.669912] __arm64_sys_finit_module+0xa8/0xe0
[ 9.674430] el0_svc_common+0xa4/0x16c
[ 9.678168] el0_svc_compat_handler+0x2c/0x40
[ 9.682511] el0_svc_compat+0x8/0x10
[ 9.686076] Code: a94257f6 f9400bf7 a8c47bfd d65f03c0 (d4210000)
[ 9.692155] ---[ end trace 7621f966afbf0a29 ]---
[ 9.697385] Kernel panic - not syncing: Fatal exception
[ 9.702599] SMP: stopping secondary CPUs
[ 9.706549] Kernel Offset: 0x1c03600000 from 0xffffffc010000000
[ 9.712456] PHYS_OFFSET: 0xfffffff440000000
[ 9.716625] CPU features: 0x080026,2a80aa18
[ 9.720795] Memory Limit: none
Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support")
Reported-by: Claire Chang <tientzu@google.com>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This patch is to add support for PTP Sync packet one-step timestamping.
Since ENETC single-step register has to be configured dynamically per
packet for correctionField offeset and UDP checksum update, current
one-step timestamping packet has to be sent only when the last one
completes transmitting on hardware. So, on the TX, this patch handles
one-step timestamping packet as below:
- Trasmit packet immediately if no other one in transfer, or queue to
skb queue if there is already one in transfer.
The test_and_set_bit_lock() is used here to lock and check state.
- Start a work when complete transfer on hardware, to release the bit
lock and to send one skb in skb queue if has.
And the configuration for one-step timestamping on ENETC before
transmitting is,
- Set one-step timestamping flag in extension BD.
- Write 30 bits current timestamp in tstamp field of extension BD.
- Update PTP Sync packet originTimestamp field with current timestamp.
- Configure single-step register for correctionField offeset and UDP
checksum update.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mark TX timestamp type per skb on skb->cb[0], instead of
global variable for all skbs. This is a preparation for
one step timestamp support.
For one-step timestamping enablement, there will be both
one-step and two-step PTP messages to transfer. And a skb
queue is needed for one-step PTP messages making sure
start to send current message only after the last one
completed on hardware. (ENETC single-step register has to
be dynamically configured per message.) So, marking TX
timestamp type per skb is required.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The adapter state can be added or deleted over different versions
of the source code. Print a string instead of a number.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The reset reason can be added or deleted over different versions
of the source code. Print a string instead of a number.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit e704f0434ea6 ("ibmvnic: Remove debugfs support") did not
clean up everything. Remove the remaining code.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In many places,first assign a value to a variable and then return
the variable. which is redundant, we should directly return the value.
in pn533_rf_field funciton,return rc also in the if statement, so we
use return 0 to replace the last return rc.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During firmware recovery, VF-Rep configuration in the firmware is lost.
Fix it by freeing and (re)allocating VF-Reps in FW at relevant points
during the error recovery process.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new helper function __bnxt_free_one_vf_rep() to free one VF rep.
We also reintialize the VF rep fields to proper initial values so that
the function can be used without freeing the VF rep data structure. This
will be used in subsequent patches to free and recreate VF reps after
error recovery.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new function bnxt_alloc_vf_rep() to allocate a VF representor.
This function will be needed in subsequent patches to recreate the
VF reps after error recovery.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After probe is successful, interface may not be bought up in all
the cases and health register mapping could be invalid if firmware
undergoes reset. Fix it by invalidating the health register at the
end of probe. It will be remapped during ifup.
Fixes: 43a440c4007b ("bnxt_en: Improve the status_reliable flag in bp->fw_health.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The retry loop in bnxt_try_recover_fw() should not abort when the
health register value is 0. It is a valid value that indicates the
firmware is booting up.
Fixes: 861aae786f2f ("bnxt_en: Enhance retry of the first message to the firmware.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The reset_prepare and reset_done calls have a null pointer check
on ae_dev however ae_dev is being dereferenced via the call to
ns3_is_phys_func with the ae->pdev argument. Fix this by performing
a null pointer check on ae_dev and hence short-circuiting the
dereference to ae_dev on the call to ns3_is_phys_func.
Addresses-Coverity: ("Dereference before null check")
Fixes: 715c58e94f0d ("net: hns3: add suspend and resume pm_ops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The shifting of the u8 integers rq->caching by 26 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that rq->caching is
greater than 0x1f then all then all the upper 32 bits of
the u64 end up as also being set because of the int
sign-extension. Fix this by casting the u8 values to a
u64 before the 26 bit left shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The shifting of the u8 integers f->fs.nat_lip[] by 24 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that the top bit of the u8
is set then all then all the upper 32 bits of the u64 end up as
also being set because of the sign-extension. Fix this by
casting the u8 values to a u64 before the 24 bit left shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sparse tool complains as follows:
drivers/power/supply/surface_charger.c:229:1: warning:
symbol 'surface_ac_pm_ops' was not declared. Should it be static?
This symbol is not used outside of surface_charger.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The sparse tool complains as follows:
drivers/power/supply/surface_battery.c:700:1: warning:
symbol 'dev_attr_alarm' was not declared. Should it be static?
drivers/power/supply/surface_battery.c:805:1: warning:
symbol 'surface_battery_pm_ops' was not declared. Should it be static?
This symbol is not used outside of surface_battery.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
<yangyicong@hisilicon.com>:
This series fix a potential interrupt race condition and
cleanup the ACPI protection for the driver.
Change since v1:
- reword the commit in patch #2
Link: https://lore.kernel.org/linux-spi/1617881505-51552-1-git-send-email-yangyicong@hisilicon.com/
Yicong Yang (2):
spi: hisi-sfc-v3xx: fix potential irq race condition
spi: hisi-sfc-v3xx: drop unnecessary ACPI_PTR and related ifendif
protection
drivers/spi/spi-hisi-sfc-v3xx.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--
2.8.1
|
|
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather
than explicitly calling spin_lock_init().
Link: https://lore.kernel.org/r/20210409095147.2294269-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/20210408113137.97202-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210408113140.103032-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 82af6d19d8d9 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr")
Link: https://lore.kernel.org/r/20210408113135.92165-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Block comments should not use a trailing */ on a separate line and every
line of a block comment should start with an '*'.
Link: https://lore.kernel.org/r/1617783353-48249-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
